Selective Reactivity of Myrcene for Vat Photopolymerization 3D Printing and Postfabrication Surface Modification.

Biosourced materials are gaining interest industrially, but there are still limitations on the library of available materials suitable for advanced manufacturing, especially using photopolymerization-based processing techniques. Terpenes, such as myrcene, are naturally produced materials possessing structural features, specifically alkenes, that avail themselves for such techniques. Free-radical and anionic polymerization techniques were used to explore molecular architecture, such as branching, as well as molecular weight and dispersity on physical properties prior to the production of 3D printing photopolymer resins. The polymyrcene resins were printed into dogbones and mold templates for soft materials. Model reactions with monofunctional thiols were used to demonstrate the potential for postpolymerization and fabrication functionalization, accompanying a physical demonstration where the surface hydrophobicity of polymyrcene could be tuned from superhydrophobic when using an alkyl chain monothiol (greater than 100° water contact angle) to a hydrophilic surface displaying a water contact angle of less than 45° compared with that of the unmodified surface (∼60°). Tunable bulk and surface properties are a unique feature for 3D printing materials and demonstrate the potential of polymyrcene and other biosourced photopolymers to a wide range of research applications.

Evaluation of mechanical properties and shrinkage stress of thiol-ene-methacrylate dental composites with synthesized fluorinated allyl ether.

It has already been reported that incorporation of thiol-ene into methacrylate resin could reduce shrinkage stress significantly. However, the mass fraction of thiol-ene in thiol-ene-methacrylate resin system should be limited because of deterioration of mechanical properties. In order to increase mass fraction of thiol-ene in thiol-ene-methacrylate ternary resin system, a new fluorinated ally ether (FUAE) was synthesized and mixed with pentaerythritol tetra (3-mercaptopropionate) (PETMA) at molar ratio of 1:1 to form new thiol-ene resin system, and then the thiol-ene resin was incorporated into Bis-GMA/TEGDMA resin to prepare thiol-ene-methacrylate resin system. The results of neat resin system showed that incorporation of new thiol-ene resin into methacrylate resin could increase degree conversion of methacrylate functional group and decrease volumetric shrinkage. In order to achieve the similar mechanical properties as methacrylate resin, mass fraction of thiol-ene in ternary resin system should not exceed 30 wt%. Thiol-ene-methacrylate resin systems with 10 wt% to 30 wt% were chosen to prepare dental resin composites, and physiochemical properties such as degree of conversion, volumetric shrinkage, shrinkage stress, flexural properties, and water sorption and solubility of these composites were investigated. The results showed that, compared with methacrylate resin-based dental composite, ternary resin-based dental composites had several advantages, such as higher DC% of methacrylate functional group, lower volumetric shrinkage, lower shrinkage stress, lower water sorption and solubility. The flexural properties of ternary resin-based dental composites were comparable or even better than those of methacrylate resin-based dental composite.

Facile fabrication of cross-linked fluorescent organic nanoparticles with aggregation-induced emission characteristic via the thiol-ene click reaction and their potential for biological imaging.

Over the past several years, the biomedical applications of fluorescent organic nanoparticles (FONs) with aggregation-induced emission (AIE) feature have been extensively explored because the AIE-active FONs could effectively overcome the aggregation caused quenching (ACQ) effect of FONs based on conventional organic dyes. The development of novel methods for synthesis of AIE-active FONs plays a centre role for their biomedical applications. In this work, we reported a facile one-step thiol-ene click reaction for fabrication of AIE-active FONs through conjugation of acrylated PEG and AIE-active tetraphenylethylene (TPE) with two ene bonds using pentaerythritol tetra(3-mercaptopropionate) as the linkage. The successful synthesis of TPE containing AIE-active copolymers was evidenced by various characterization techniques. The particle size and fluorescence properties of the resultant TPE-S-PEG copolymers were evaluated by transmission electronic microscopy and fluorescence spectroscopy. Moreover, the cell viability and cell uptake behavior was also examined to evaluate their potential for biological imaging. We demonstrated that the cross-linked TPE-S-PEG show small size, high water dispersibility, low cytotoxicity and strong fluorescence for tracing. All of these advantages endow the TPE-S-PEG FONs great potential for biological imaging applications. Furthermore, this novel click reaction can take place under mild experimental conditions with high efficiency. It could be also further expanded for preparation of multifunctional AIE-active materials due to the universality of the thiol-ene click reaction and good precursor applicapability. Taken together, we have developed a novel and effective thiol-ene click reaction to fabricate the cross-linked AIE-active FONs, which display excellent physicochemical and biological properties and are promising for biomedical applications.

Harnessing the Chemical Diversity of the Natural Product Magnolol for the Synthesis of Renewable, Degradable Neolignan Thermosets with Tunable Thermomechanical Characteristics and Antioxidant Activity.

Magnolol, a neolignan natural product with antioxidant properties, contains inherent, orthogonal, phenolic, and alkenyl reactive groups that were used in both direct thermoset synthesis, as well as the stepwise synthesis of a small library of monomers, followed by transformation into thermoset materials. Each monomer from the small library was prepared via a single step functionalization reaction of the phenolic groups of magnolol. Thermoset materials were realized through solvent-free, thiol-ene reactions, and the resulting cross-linked materials were each comprised of thioether and ester linkages, with one retaining the hydrophilic phenols from magnolol, another having the phenols protected as an acetonide, and two others incorporating the phenols into additional cross-linking sites via hydrolytically labile carbonates or stable ether linkages. With this diversity of chemical compositions and structures, the thermosets displayed a range of thermomechanical properties including glass transition temperatures, Tg, 29-52 °C, onset of thermal degradation, Td, from about 290-360 °C, and ultimate strength up to 50 MPa. These tunable materials were studied in their degradation and biological properties with the aim of exploiting the antioxidant properties of the natural product. Hydrolytic degradation occurred under basic conditions (pH = 11) in all thermosets, but with kinetics that were dependent upon their chemical structures and mechanical properties: 20% mass loss was observed at 5, 7, 27, and 40 weeks for the thermosets produced from magnolol directly, acetonide-protected magnolol, bis(allyl carbonate)-functionalized magnolol, and bis(allyl ether)-functionalized magnolol, respectively. Isolated degradation products and model compounds displayed antioxidant properties similar to magnolol, as determined by both UV-vis and in vitro reactive oxygen species (ROS) assays. As these magnolol-based thermosets were found to also allow for extended cell culture, these materials may serve as promising degradable biomaterials.

Transcriptome analysis of different sizes of 3-mercaptopropionic acid-modified cadmium telluride quantum dot-induced toxic effects reveals immune response in rat hippocampus.

Recently, the increasing number of bio-safety assessments on cadmium-containing quantum dots (QDs) suggested that they could lead to detrimental effects on the central nervous system (CNS) of living organisms, but the underlying action mechanisms are still rarely reported. In this study, whole-transcriptome sequencing was performed to analyze the changes in genome-wide gene expression pattern of rat hippocampus after treatments of cadmium telluride (CdTe) QDs with two sizes to understand better the mechanisms of CdTe QDs causing toxic effects in the CNS. We identified 2095 differentially expressed genes (DEGs). Fifty-five DEGs were between the control and 2.2 nm CdTe QDs, 1180 were between the control and 3.5 nm CdTe QDs and 860 were between the two kinds of CdTe QDs. It seemed that the 3.5 nm CdTe QD exposure might elicit severe effects in the rat hippocampus than 2.2 nm CdTe QDs at the transcriptome level. After bioinformatics analysis, we found that most DEG-enriched Gene Ontology subcategories and Kyoto Encyclopedia of Genes and Genomes pathways were related with the immune system process. For example, the Gene Ontology subcategories included immune response, inflammatory response and T-cell proliferation; Kyoto Encyclopedia of Genes and Genomes pathways included NOD/Toll-like receptor signaling pathway, nuclear factor-κB signaling pathway, tumor necrosis factor signaling pathway, natural killer cell-mediated cytotoxicity and T/B-cell receptor signaling pathway. The traditional toxicological examinations confirmed the systemic immune response and CNS inflammation in rats exposed to CdTe QDs. This transcriptome analysis not only revealed the probably molecular mechanisms of CdTe QDs causing neurotoxicity, but also provided references for the further related studies.

Resin cements formulated with thio-urethanes can strengthen porcelain and increase bond strength to ceramics.

OBJECTIVES: The use of thio-urethane oligomers has been shown to significantly improve the mechanical properties of resin cements (RCs). The aim of this study was to use thio-urethane-modified RC to potentially reinforce the porcelain-RC structure and to improve the bond strength to zirconia and lithium disilicate. METHODS: Six oligomers were synthesized by combining thiols - pentaerythritol tetra-3-mercaptopropionate (PETMP, P) or trimethylol-tris-3-mercaptopropionate (TMP, T) - with di-functional isocyanates - 1,6-Hexanediol-diissocyante (HDDI) (aliphatic, AL) or 1,3-bis(1-isocyanato-1-methylethyl)benzene (BDI) (aromatic, AR) or Dicyclohexylmethane 4,4'-Diisocyanate (HMDI) (cyclic, CC). Thio-urethanes (20 wt%) were added to a BisGMA/UDMA/TEGDMA organic matrix. Filler was introduced at 60 wt%. The microshear bond strength (µSBS), Weibull modulus (m), and failure pattern of RCs bonded to zirconia (ZR) and lithium disilicate (LD) ceramics was evaluated. Biaxial flexural test and fractographic analysis of porcelain discs bonded to RCs were also performed. The biaxial flexural strength (σbf) and m were calculated in the tensile surfaces of porcelain and RC structures (Z = 0 and Z = -t2, respectively). RESULTS: The µSBS was improved with RCs formulated with oligomers P_AL or T_AL bonded to LD and P_AL, P_AR or T_CC bonded to zirconia in comparison to controls. Mixed failures predominated in all groups. σbf had superior values at Z = 0 with RCs formulated with oligomers P_AL, P_AR, T_AL, or T_CC in comparison to control; σbf increased with all RCs composed by thio-urethanes at Z = -t2. Fractographic analysis revealed all fracture origins at Z = 0. CONCLUSION: The use of specific thio-urethane oligomers as components of RCs increased both the biaxial flexural strength of the porcelain-RC structure and the µSBS to LD and ZR. CLINICAL SIGNIFICANCE: The current investigation suggests that it is possible to reinforce the porcelain-RC pair and obtain higher bond strength to LD and ZR with RCs formulated with selected types of thio-urethane oligomers.

Coating Metal Nanoparticle Surfaces with Small Organic Molecules Can Reduce Nonspecific Cell Uptake.

Elucidation of mechanisms of uptake of nanoparticles by cells and methods to prevent this uptake is essential for many applications of nanoparticles. Most recent studies have focused on the role of proteins that coat nanoparticles and have employed PEGylation, particularly dense coatings of PEG, to reduce protein opsonization and cell uptake. Here we show that small molecule coatings on metallic nanoparticles can markedly reduce cell uptake for very sparsely PEGylated nanoparticles. Similar results were obtained in media with and without proteins, suggesting that protein opsonization is not the primary driver of this phenomenon. The reduction in cell uptake is proportional to the degree of surface coverage by the small molecules. Probing cell uptake pathways using inhibitors suggested that the primary role of increased surface coverage is to reduce nanoparticles' interactions with the scavenger receptors. This work highlights an under-investigated mechanism of cell uptake that may have played a role in many other studies and also suggests that a wide variety of molecules can be used alongside PEGylation to stably passivate nanoparticle surfaces for low cell uptake.

Synthesis of polymeric monoliths via thiol-maleimide polymerization reaction for highly efficient chromatographic separation.

One-step thiol-maleimide polymerization reaction was firstly adopted for direct preparation of polymeric monoliths via alkaline-catalyzed reaction of 4,4'-bis(maleimidophenyl)methane (BMI) and trimethylolpropane tris(3-mercaptopropionate) (3SH)/pentaerythriol tetra(3-mercaptopropionate) (4SH) in the presence of a small amount of triethylamine (TEA). The polymerization could be performed within 3h, which was faster than thermal-initiated free radical polymerization. Two kinds of monoliths, poly(BMI-co-3SH) (marked as I) and poly(BMI-co-4SH) (marked as II), were characterized with scanning electron microscopy (SEM), attenuated total reflection Fourier-transformed infrared spectroscopy (ATR-FTIR), thermal gravimetric analysis (TGA) and mercury intrusion porosimetry (MIP). Satisfactory chromatographic separation ability and column efficiency were gained for analysis of small molecular compounds such as alkylbenzenes, polynuclear aromatic hydrocarbons (EPA 610) and phenols in reversed-phase capillary liquid chromatography (cLC). High column efficiency (180,500N/m) for butylbenzene was acquired on poly(BMI-co-3SH) column I-2, which was higher than those on most reported polymeric monoliths. A retention-independent efficient performance of small molecules was obtained by plotting of plate height (H) of alkylbenzenes versus the linear velocity (u). A term values in van Deemter equation of I-2 (1.72-0.24µm) and poly(BMI-co-4SH) column II-2 (5.28-4.14µm) were smaller than those of traditional organic/hybrid monoliths. Finally, as a practical application, 53 and 2184 unique peptides from the tryptic digests of bovine serum albumin (BSA) and HeLa cell proteins were positively identified with poly(BMI-co-3SH) monolith in cLC-MS.

pH-sensitive nanogels with ortho ester linkages prepared via thiol-ene click chemistry for efficient intracellular drug release.

pH-sensitive nanogels with ortho ester linkages were conveniently prepared through reaction of thiol-ene click chemistry. Through adjusting feed reactant ratios and concentrations of ortho ester diacrylamide (OEAM), pentaerythritol tetra(3-mercaptopropionate) (PT), and methoxyl poly(ethyleneglycol) acrylate (mPEGA), the size of the nanogels could be controlled at 100-200nm with relatively narrow size distributions. The nanogels with size of 149.1±17.7nm (designed as NG) were verified by proton nuclear magnetic resonance (NMR), Fourier transform infrared spectroscopy (FT-IR), dynamic laser scattering (DLS) and transmission electron microscopy (TEM). Doxorubicin (DOX) was loaded into NG with high drug loading efficiency up to 73.7%. In vitro drug release studies showed that up to 75.9% DOX from NG was released in 24h at pH 5.0 because of hydrolysis of ortho ester. Cellular uptake studies confirmed that DOX-loaded NG (NG/DOX) could be readily internalized by two-dimensional cells, resulting in efficient antitumor efficiency of cancer cells. Three-dimensional (3D) multicellular tumor spheroids (MCTS) as in vitro tumor model was used to further evaluate the antitumor effect of NG/DOX. The results demonstrated that NG/DOX showed a significantly enhanced penetration and growth inhibition in 3D multicellular tumor spheroids (MCTS), compared to free DOX.

The synthesis of weak acidic type hybrid monolith via thiol-ene click chemistry and its application in hydrophilic interaction chromatography.

In this work, a porous structure and good permeability monolithic column was polymerized in UV transparent fused-silica capillaries via photo-initiated thiol-ene click polymerization of 2,4,6,8-tetravinyl-2,4,6,8-tetramethylcyclotetrasiloxane (TMTVS), pentaerythritol tetra(3-mercaptopropionate)(PETMP), itaconic acid, respectively, in the presence of porogenic solvents (tetrahydrofuranand methanol) and an initiator (2,2-dimethoxy-2-phenylacetophenone) (DMPA) within 30 min. The physical properties of this monolith were characterized by scanning electron microscopy (SEM), Fourier transform infrared (FT-IR) spectroscopy and nitrogen adsorption/desorption measurements. For an overall evaluation of the monolith in chromatographic application, separations of polycyclic aromatic hydrocarbons (PAHs), phenols, amides and bases were carried out. The column efficiency of this monolith could be as high as 112 560 N/m. It also possesses a potential application in fabrication of monoliths with high efficiency for c-LC. In addition, the resulting monolithic column demonstrated the potential use in analysis of environment waters.

PEGDA hydrogels as a replacement for animal tissues in mucoadhesion testing.

Utilization of animal parts in ex-vivo mucoadhesion assays is a common approach that presents many difficulties due to animal rights issues and large variance between animals. This study examines the suitability of two PEGDA (poly(ethylene glycol) diacrylate) based hydrogels to serve as tissue mimetics for mucoadhesion evaluation. One hydrogel, termed PEGDA-QT, was composed of pentaerythritol tetrakis (3-mercaptopropionate) and PEG and contained free thiol groups mimicking those found in natural mucosa. The other hydrogel was formed by UV (ultraviolet) curing of PEGDA and mimicked the mechanical property of mucosa but not its chemical constitute. When ranking different first generation mucoadhesive polymers using a tensile assay, both hydrogels showed good agreement with the ranking achieved for porcine small intestine. However, only PEGDA-QT and porcine small intestine shared a similar displacement curve. The same ranking for PEGDA-QT and porcine small intestine was also observed when comparing a second-generation mucoadhesive polymer, thiolated alginate, to native alginate. Our findings suggest that PEGDA-QT could serve as a replacement for porcine small intestine in both mucoadhesion evaluations using a tensile machine and the flow-through method for first and second-generation mucoadhesive polymers.

Improving permeability and chromatographic performance of poly(pentaerythritol diacrylate monostearate) monolithic column via photo-induced thiol-acrylate polymerization.

A simple approach was developed for rapid preparation of polymeric monolithic columns in UV-transparent fused-silica capillaries via photoinitiated thiol-acrylate polymerization of pentaerythritol diacrylate monostearate (PEDAS) and trimethylolpropane tris(3-mercaptopropionate) (TPTM) within 10min, in which the acrylate homopolymerized and copolymerized with the thiol simultaneously. The morphology, permeability and chromatographic performance of the resulting poly(PEDAS-co-TPTM) monoliths were studied. It could be observed from SEM that the morphology of poly(PEDAS-co-TPTM) monolith was rather different from that of poly(PEDAS) monolith, which was fabricated via photo-induced free radical polymerization using PEDAS as the sole monomer. Compared with poly(PEDAS) monolith, poly(PEDAS-co-TPTM) monolith possessed better permeability when they were fabricated under the same preparation conditions. By adjusting the composition of porogenic solvents, poly(PEDAS-co-TPTM) monolith exhibited lower plate heights (15.7-17.7µm) than poly(PEDAS) monolith (19.1-37.9µm) in µLC. In addition, 66 unique peptides were positively identified on poly(PEDAS-co-TPTM) monolith when tryptic digest of four proteins was separated by µLC-MS/MS, demonstrating its potential in proteome analysis.

Characterization of methacrylate-based composites containing thio-urethane oligomers.

OBJECTIVE: To evaluate the ability of thio-urethane oligomers to improve the properties of restorative composite resins. METHODS: Oligomers were synthesized by combining 1,6-hexanediol-diissocyante (aliphatic) with pentaerythritol tetra-3-mercaptopropionate (PETMP) or 1,3-bis(1-isocyanato-1-methylethyl)benzene (aromatic) with trimethylol-tris-3-mercaptopropionate (TMP), at 1:2 isocyanate:thiol, leaving pendant thiols. Oligomers were added at 0-20 wt% to BisGMA-TEGDMA (70-30 wt%). Silanated inorganic fillers were added (70 wt%). Materials were photoactivated at 800 mW/cm(2) filtered to 320-500 nm. Near-IR was used to follow degree of methacrylate conversion (DC). Mechanical properties were evaluated in three-point bending with 2 mm × 2 mm × 25 mm bars for flexural strength/modulus and toughness (FS/E, and T) according to ISO 4049, and 2 mm × 5 mm × 25 mm notched specimens for fracture toughness (KIC). Polymerization stress (PS) was measured on the Bioman. Results were analyzed with ANOVA/Tukey's test (α=5%). RESULTS: Significant increase in DC was observed in thio-urethane-containing materials especially for the group with 20 wt% of aliphatic version. Materials composed by oligomers also promoted higher FS, E, and KIC in comparison to controls irrespective of thio-urethane type. A significant increase in toughness was detected by ANOVA, but not distinguished in the groups. The PS was significantly reduced by the presence of thio-urethane for almost all groups. CONCLUSIONS: The use of thio-urethane oligomer to compose methacrylate-based restorative composite promote increase in DC, FS, E and KIC while significant reduces PS. SIGNIFICANCE: A simple additive was shown to reduce stress while increasing convrersion and mechanical properties, mainly fracture toughness. This has he potential of increasing the service life of dental composites, without changing current operatory procedures.

[One-step fermentation for producing simvastatin via RNAi silencing of lovF gene in Aspergillus terreus].

Simvastatin is one of the important prescription drugs for hypercholesterolemia. Monacolin J is a key intermediate during simvastatin synthesis, and also an intermediate of lovastatin biosynthesis. In this work, we construct a monacolin J producing strain via RNA interference to achieve one-step fermentation to obtain simvastatin. The lovF gene silencing plasmid pMHJ137 was constructed and transformed into Aspergillus terreus by Agrobacterium tumefaciens mediated transformation method. Precursor DMB-S-MMP was supplied during the fermentation to screen positive strains of transformants; which also further confirmed the simvastatin producing capability of MJ1-24 by one-step fermentation. Strain MJ1-24 produced monacolin J rather than lovastatin, and the feeding of DMB-S-MMP resulted in the generation of simvastatin. This study suggested that RNAi can efficiently silence the lovF gene of A. terreus and promote the simvastatin production by one-step fermentation.

Thiol-ene microfluidic devices for microchip electrophoresis: Effects of curing conditions and monomer composition on surface properties.

Thiol-ene polymer formulations are raising growing interest as new low-cost fabrication materials for microfluidic devices. This study addresses their feasibility for microchip electrophoresis (MCE) via characterization of the effects of UV curing conditions and aging on the surface charge and wetting properties. A detailed comparison is made between stoichiometric thiol-ene (1:1) and thiol-ene formulations bearing 50% molar excess of allyls ("enes"), both prepared without photoinitiator or other polymer modifiers. Our results show that the surface charge of thiol-ene 1:1 increases along with increasing UV exposure dose until a threshold (here, about 200J/cm(2)), whereas the surface charge of thiol-ene 2:3 decreases as a function of increasing UV dose. However, no significant change in the surface charge upon storage in ambient air was observed over a period of 14 days (independent of the curing conditions). The water contact angles of thiol-ene 2:3 (typically 70-75°) were found to be less dependent on the UV dose and storing time. Instead, water contact angles of thiol-ene 1:1 slightly decrease (from initial 90 to 95° to about 70°) as a function of UV increasing exposure dose and storing time. Most importantly, both thiol-ene formulations remain relatively hydrophilic over extended periods of time, which favors their use in MCE applications. Here, MCE separation of biologically active peptides and selected fluorescent dyes is demonstrated in combination with laser-induced fluorescence detection showing high separation efficiency (theoretical plates 8200 per 4cm for peptides and 1500-2700 per 4cm for fluorescent dyes) and lower limits of detection in the sub-µM (visible range) or low-µM (near-UV range) level.

Water-Hydrogel Binding Affinity Modulates Freeze-Drying-Induced Micropore Architecture and Skeletal Myotube Formation.

Freeze-dried hydrogels are increasingly used to create 3D interconnected micropores that facilitate biomolecular and cellular transports. However, freeze-drying is often plagued by variance in micropore architecture based on polymer choice. We hypothesized that water-polymer binding affinity plays a significant role in sizes and numbers of micropores formed through freeze-drying, influencing cell-derived tissue quality. Poly(ethylene glycol)diacrylate (PEGDA) hydrogels with alginate methacrylate (AM) were used due to AM's higher binding affinity for water than PEGDA. PEGDA-AM hydrogels with larger AM concentrations resulted in larger sizes and numbers of micropores than pure PEGDA hydrogels, attributed to the increased mass of water binding to the PEGDA-AM gel. Skeletal myoblasts loaded in microporous PEGDA-AM hydrogels were active to produce 3D muscle-like tissue, while those loaded in pure PEGDA gels were localized on the gel surface. We propose that this study will be broadly useful in designing and improving the performance of various microporous gels.

A Novel Partial Agonist of Peroxisome Proliferator-Activated Receptor γ with Excellent Effect on Insulin Resistance and Type 2 Diabetes.

Partial agonists of peroxisome proliferator-activated receptor γ (PPARγ) reportedly reverse insulin resistance in patients with type 2 diabetes mellitus. In this work, a novel non-thiazolidinedione-partial PPARγ ligand, MDCCCL1636 [N-(4-hydroxyphenethyl)-3-mercapto-2-methylpropanamide], was investigated. The compound displayed partial agonist activity in biochemical and cell-based transactivation assays and reversed insulin resistance. MDCCCL1636 showed a potential antidiabetic effect on an insulin-resistance model of human hepatocarcinoma cells (HepG2). High-fat diet-fed streptozotocin-induced diabetic rats treated with MDCCCL1636 for 56 days displayed reduced fasting serum glucose and reversed dyslipidemia and pancreatic damage without significant weight gain. Furthermore, MDCCCL1636 had lower toxicity in vivo and in vitro than pioglitazone. MDCCCL1636 also potentiated glucose consumption and inhibited the impairment in insulin signaling targets, such as AKT, glycogen synthase kinase 3ß, and glycogen synthase, in HepG2 human hepatoma cells. Overall, our results suggest that MDCCCL1636 is a promising candidate for the prevention and treatment of type 2 diabetes mellitus.

Fast preparation of a highly efficient organic monolith via photo-initiated thiol-ene click polymerization for capillary liquid chromatography.

A novel organic monolith was firstly prepared in a UV-transparent fused-silica capillary by a single-step approach via photo-initiated thiol-ene click polymerization reaction of 1,2,4-trivinylcyclohexane (TVCH) and pentaerythriol tetra(3-mercaptopropionate) (4SH) within 10min. The effects of both composition of prepolymerization solution and polymerization time on the morphology and permeability of monolithic column were investigated in detail. Then, the optimal condition was acquired to fabricate a homogeneous and permeable organic monolith. The chemical groups of the monolithic column were confirmed by Fourier transform infrared spectroscopy (FT-IR). The SEM graphs showed the organic monolith possessed a uniform porous structure, which promotes the highest column efficiency of ∼133,000 plates per meter for alkylbenzenes at the linear velocity of 0.65mm/s in reversed-phase liquid chromatography. Finally, the organic monolithic column was further applied for separation of basic compounds, pesticides and EPA610, indicating satisfactory separation ability.

Thio-urethane oligomers improve the properties of light-cured resin cements.

Thio-urethanes were synthesized by combining 1,6-hexanediol-diissocyante (aliphatic) with pentaerythritol tetra-3-mercaptopropionate (PETMP) or 1,3-bis(1-isocyanato-1-methylethyl)benzene (aromatic) with trimethylol-tris-3-mercaptopropionate (TMP), at 1:2 isocyanate:thiol, leaving pendant thiols. Oligomers were added at 10-30 phr to BisGMA-UDMA-TEGDMA (5:3:2, BUT). 25 wt% silanated inorganic fillers were added. Commercial cement (Relyx Veneer, 3M-ESPE) was also evaluated with 10-20 phr of aromatic oligomer. Near-IR was used to follow methacrylate conversion (DC) and rate of polymerization (Rpmax). Mechanical properties were evaluated in three-point bending (ISO 4049) for flexural strength/modulus (FS/FM, and toughness), and notched specimens (ASTM Standard E399-90) for fracture toughness (KIC). Polymerization stress (PS) was measured on the Bioman. Volumetric shrinkage (VS, %) was measured with the bonded disk technique. Results were analyzed with ANOVA/Tukey's test (α=5%). In general terms, for BUT cements, conversion and mechanical properties in flexure increased for selected groups with the addition of thio-urethane oligomers. The aromatic versions resulted in greater FS/FM than aliphatic. Fracture toughness increased by two-fold in the experimental groups (from 1.17 ± 0.36 MPam(1/2) to around 3.23 ± 0.22 MPam(1/2)). Rpmax decreased with the addition of thio-urethanes, though the vitrification point was not statistically different from the control. VS and PS decreased with both oligomers. For the commercial cement, 20 phr of oligomer increased DC, vitrification, reduced Rpmax and also significantly increased KIC, and reduced PS and FM. Thio-urethane oligomers were shown to favorably modify conventional dimethacrylate networks. Significant reductions in polymerization stress were achieved at the same time conversion and fracture toughness increased.

Microcellular open porous monoliths for cell growth by thiol-ene polymerization of low-toxicity monomers in high internal phase emulsions.

Open porous microcellular polymers with high degrees of porosity are prepared from divinyl adipate and pentaerythritol tetrakis(3-mercaptopropionate) by thiol-ene polymerization within high internal phase emulsions. The influence of monomer ratio, droplet phase volume, and emulsion stirring rate on the morphology and mechanical properties of the products is studied. The newly produced material is successfully applied as a scaffold for osteoblastic MC3T3-E1 cells in vitro, showing increased rates of cell growth compared to material prepared by standard methods.