A Light-Powered In Vitro Synthetic Enzymatic Biosystem for the Synthesis of 3-Hydroxypropionic Acid via CO2 Fixation.

3-Hydroxypropionic acid (3-HP) is a highly sought-after platform chemical serving as a precursor to a variety of high value-added chemical products. In this study, we designed and constructed a novel light-powered in vitro synthetic enzymatic biosystem comprising acetyl-CoA ligase, acetyl-CoA carboxylase, malonyl-CoA reductase, and phosphotransferase to efficiently produce 3-HP through CO2 fixation from acetate, a cost-effective and readily available substrate. The system employed natural thylakoid membranes (TMs) for the regeneration of adenosine triphosphate and nicotinamide adenine dinucleotide phosphate. Comprehensive investigations were conducted on the effects of buffer solutions, substrate concentrations, enzyme loading levels, and TMs loading levels to optimize the yield of 3-HP. Following optimization, a production of 0.46 mM 3-HP was achieved within 6 h from an initial 0.5 mM acetate, with a yield nearing 92%. This work underscores the simplicity of 3-HP production via an in vitro biomanufacturing platform and highlights the potential for incorporating TMs as a sustainable and environmentally friendly approach in biomanufacturing processes.

Kinetic characterization of the C-terminal domain of Malonyl-CoA reductase.

Malonyl-CoA reductase utilizes two equivalents of NADPH to catalyze the reduction of malonyl-CoA to 3-hydroxypropionic acid (3HP). This reaction is part of the carbon fixation pathway in the phototrophic bacterium Chloroflexus aurantiacus. The enzyme is composed of two domains. The C-terminal domain catalyzes the reduction of malonyl-CoA to malonic semialdehyde, while the N-terminal domain catalyzes the reduction of the aldehyde to 3HP. The two domains can be produced independently and retain their enzymatic activity. This report focuses on the kinetic characterization of the C-terminal domain. Initial velocity patterns and inhibition studies showed the kinetic mechanism is ordered with NADPH binding first followed by malonyl-CoA. Malonic semialdehyde is released first, while CoA and NADP+ are released randomly. Analogs of malonyl-CoA showed that the thioester carbon is reduced, while the carboxyl group is needed for proper positioning. The enzyme transfers the pro-S hydrogen of NADPH to malonyl-CoA and pH rate profiles revealed that a residue with a pKa value of about 8.8 must be protonated for activity. Kinetic isotope effects indicated that NADPH is not sticky (that is, NADPH dissociates from the enzyme faster than the rate of product formation) and product release is partially rate-limiting. Moreover, the mechanism is stepwise with the pH dependent step occurring before or after hydride transfer. The findings from this study will aid in the development of an eco-friendly biosynthesis of 3HP which is an industrial chemical used in the production of plastics and adhesives.

Tunable translation-level CRISPR interference by dCas13 and engineered gRNA in bacteria.

Although CRISPR-dCas13, the RNA-guided RNA-binding protein, was recently exploited as a translation-level gene expression modulator, it has still been difficult to precisely control the level due to the lack of detailed characterization. Here, we develop a synthetic tunable translation-level CRISPR interference (Tl-CRISPRi) system based on the engineered guide RNAs that enable precise and predictable down-regulation of mRNA translation. First, we optimize the Tl-CRISPRi system for specific and multiplexed repression of genes at the translation level. We also show that the Tl-CRISPRi system is more suitable for independently regulating each gene in a polycistronic operon than the transcription-level CRISPRi (Tx-CRISPRi) system. We further engineer the handle structure of guide RNA for tunable and predictable repression of various genes in Escherichia coli and Vibrio natriegens. This tunable Tl-CRISPRi system is applied to increase the production of 3-hydroxypropionic acid (3-HP) by 14.2-fold via redirecting the metabolic flux, indicating the usefulness of this system for the flux optimization in the microbial cell factories based on the RNA-targeting machinery.

Efficient bioproduction of poly(3-hydroxypropionate) homopolymer using engineered Escherichia coli strains.

This study focuses on the development of a scalable method for producing poly(3-hydroxypropionate), a homopolymer with significant physico-mechanical properties, through the use of metabolically-engineered Escherichia coli K12 (MG1655) and externally supplied 3-hydroxypropionate. The polymer synthesis pathway was established and optimized through synthetic biology techniques, including the effects of overexpressing phasin and cell division proteins. The optimized strain achieved unprecedented production titers of 9.5 g/L in flask cultures and 80 g/L in fed-batch bioreactors within 45 h. The analysis of poly(3-hydroxypropionate) polymer properties revealed it possesses excellent elasticity (Young's modulus < 6 MPa) and tensile strength (∼80 MPa), positioning it within the category of elastomers or flexible plastics. These findings suggest a viable path for the sustainable, large-scale production of the poly(3-hydroxypropionate) biopolymer.

Untargeted metabolomics of buffalo urine reveals hydracyrlic acid, 3-bromo-1-propanol and benzyl serine as potential estrus biomarkers.

Buffalo is a silent heat animal and doesn't show prominent signs of estrous like cattle so it becomes difficult for farmers to determine the receptivity of the animal based purely on the animal behaviour. India, having a huge population size, needs to produce more milk for the population. Successful artificial insemination greatly depends on the receptivity of the animal. Hence the present study aimed to identify the changes in the metabolome of the buffalo. GC-MS based mass spectrometric analysis was deployed for the determination of estrous by differential expression of metabolites. It was found that hydracrylic acid, 3-bromo-1-propanol and benzyl serine were significantly upregulated in the estrous phase of buffalo (p.value ≤0.05, FC ≥ 2). The pathway enrichment analysis also supported the same as pathways related to amino acid metabolism and fatty acid metabolism were up regulated along with the Warburg effect which is linked to the rapid cell proliferation which might help prepare animals to meet the energy requirement during the estrous. Further analysis of the metabolic biomarkers using ROC analysis also supported these three metabolites as probable biomarkers as they were identified with AUC values of 0.7 or greater. SIGNIFICANCE: The present study focuses on the untargeted metabolomics studies of buffalo urine with special reference to the estrous phase of reproductive cycle. The estrous signals are more prominent in cattle, where animals show clear estrous signals such as mounting and discharge along with vocal signals. Buffalo is a silent heat animal and it becomes difficult for farmers to detect the estrous based on the physical and behavioral signals. Hence the present study focuses on GC-MS based untargeted metabolomics to identify differentially expressed urine metabolites. In this study, hydracrylic acid, 3-bromo-1-propanol and benzyl serine were found to be significantly upregulated in the estrous phase of buffalo (p-value ≤0.05, FC ≥ 2). Further confirmation of the metabolic biomarkers was done using Receiver operating characteristics (ROC) analysis which also supported these three metabolites as probable biomarkers as they had AUC values of 0.7 or greater. Hence, this study will be of prime importance for the people working in the area of animal metabolomics.

Increased CO2 fixation enables high carbon-yield production of 3-hydroxypropionic acid in yeast.

CO2 fixation plays a key role to make biobased production cost competitive. Here, we use 3-hydroxypropionic acid (3-HP) to showcase how CO2 fixation enables approaching theoretical-yield production. Using genome-scale metabolic models to calculate the production envelope, we demonstrate that the provision of bicarbonate, formed from CO2, restricts previous attempts for high yield production of 3-HP. We thus develop multiple strategies for bicarbonate uptake, including the identification of Sul1 as a potential bicarbonate transporter, domain swapping of malonyl-CoA reductase, identification of Esbp6 as a potential 3-HP exporter, and deletion of Uga1 to prevent 3-HP degradation. The combined rational engineering increases 3-HP production from 0.14 g/L to 11.25 g/L in shake flask using 20 g/L glucose, approaching the maximum theoretical yield with concurrent biomass formation. The engineered yeast forms the basis for commercialization of bio-acrylic acid, while our CO2 fixation strategies pave the way for CO2 being used as the sole carbon source.

Simultaneous utilization of glucose and xylose by metabolically engineered Pseudomonas putida for the production of 3-hydroxypropionic acid.

Pseudomonas putida,a robust candidate for lignocellulosicbiomass-based biorefineries, encounters challenges in metabolizing xylose. In this study, Weimberg pathway was introduced intoP. putidaEM42 under a xylose-inducible promoter, resulting in slow cell growth (0.05 h-1) on xylose.Through adaptive laboratory evolution, an evolved strain exhibited highly enhanced growth on xylose (0.36 h-1), comparable to that on glucose (0.39 h-1). Whole genome sequencing identified four mutations, with two key mutations located inPP3380andPP2219. Reverse-engineered strain 8EM42_Xyl, harboring these two mutations, showed enhanced growth on xylose but co-utilizing glucose and xylose at a rate of 0.3 g/L/h. Furthermore, 8EM42_Xyl was employed for 3-hydroxypropionic acid (3HP) production from glucose and xylose by expressing malonyl-CoA reductase and acetyl-CoA carboxylase, yielding 29 g/L in fed-batch fermentation. Moreover, the engineered strain exhibited promising performance in 3HP production from empty palm fruit bunch hydrolysate, demonstrating its potential as a promising cell factory forbiorefineries.

Metabolic Remodulation of Chassis and Corn Stover Bioprocessing to Unlock 3-Hydroxypropionic Acid Biosynthesis from Agrowaste-Derived Substrates.

Embracing the principles of sustainable development, the valorization of agrowastes into value-added chemicals has nowadays received significant attention worldwide. Herein, Escherichia coli was metabolically rewired to convert cellulosic hydrolysate of corn stover into a key platform chemical, namely, 3-hydroxypropionic acid (3-HP). First, the heterologous pathways were introduced into E. coli by coexpressing glycerol-3-P dehydrogenase and glycerol-3-P phosphatase in both single and fusion (gpdp12) forms, making the strain capable of synthesizing glycerol from glucose. Subsequently, a glycerol dehydratase (DhaB123-gdrAB) and an aldehyde dehydrogenase (GabD4) were overexpressed to convert glycerol into 3-HP. A fine-tuning between glycerol synthesis and its conversion into 3-HP was successfully established by 5'-untranslated region engineering of gpdp12 and dhaB123-gdrAB. The strain was further metabolically modulated to successfully prevent glycerol flux outside the cell and into the central metabolism. The finally remodulated chassis produced 32.91 g/L 3-HP from the cellulosic hydrolysate of stover during fed-batch fermentation.

Steric Perturbation of the Grob-like Final Step of Ethylene-Forming Enzyme Enables 3-Hydroxypropionate and Propylene Production.

Ethylene-forming enzyme (EFE) is an iron(II)-dependent dioxygenase that fragments 2-oxoglutarate (2OG) to ethylene (from C3 and C4) and 3 equivs of carbon dioxide (from C1, C2, and C5). This major ethylene-forming pathway requires l-arginine as the effector and competes with a minor pathway that merely decarboxylates 2OG to succinate as it oxidatively fragments l-arginine. We previously proposed that ethylene forms in a polar-concerted (Grob-like) fragmentation of a (2-carboxyethyl)carbonatoiron(II) intermediate, formed by the coupling of a C3-C5-derived propion-3-yl radical to a C1-derived carbonate coordinated to the Fe(III) cofactor. Replacement of one or both C4 hydrogens of 2OG by fluorine, methyl, or hydroxyl favored the elimination products 2-(F1-2/Me/OH)-3-hydroxypropionate and CO2 over the expected olefin or carbonyl products, implying strict stereoelectronic requirements in the final step, as is known for Grob fragmentations. Here, we substituted active-site residues expected to interact sterically with the proposed Grob intermediate, aiming to disrupt or enable the antiperiplanar disposition of the carboxylate electrofuge and carbonate nucleofuge required for concerted fragmentation. The bulk-increasing A198L substitution barely affects the first partition between the major and minor pathways but then, as intended, markedly diminishes ethylene production in favor of 3-hydroxypropionate. Conversely, the bulk-diminishing L206V substitution enables propylene formation from (4R)-methyl-2OG, presumably by allowing the otherwise sterically disfavored antiperiplanar conformation of the Grob intermediate bearing the extra methyl group. The results provide additional evidence for a polar-concerted ethylene-yielding step and thus for the proposed radical-polar crossover via substrate-radical coupling to the Fe(III)-coordinated carbonate.

Producción de ácido láctico por una mezcla de Lactococcus lactis y Streptococcus salivarius en fermentaciones en discontinuo / Lactic acid production from a mixture of cultures of Lactococcus lactis and Streptococcus salivarius using batch fermentation

Se estudió la producción de ácido láctico (AL), la conversión de sustrato (CG), y el rendimiento (Y p/s) de Lactococcus lactis, Streptococcus salivarius y una mezcla 1:1 de ambas cepas en sustrato glucosado. Lactococcus lactis se seleccionó de 20 cepas homofermentativas aisladas de cultivos de caña de azúcar variedad CC85-92 y Streptococcus salivarius se aisló de un fermento láctico comercial. En fermentaciones llevadas a cabo con lamezcla microbiana, a 32 °C con 60 gL-1 de glucosa y pH 6,0 se obtuvo un máximo de 47,63 gL-1 de ácido láctico, conversión de glucosa de 95,4% y rendimiento en producto de 0,83 gg-1.

Production of lactic acid (LA), yield (Y p/s) and substrate conversion (SC) from Lactococcus lactis, Streptococcus salivarius and their mixtures were tested. Lactococcus lactis was selected from 20 homofermentative strains isolated from a sugar cane crop (variety CC85-92) and Streptococcus salivarius was isolated from a commercial lactic ferment. Batch fermentation experiments at 32 C with a glucose concentration of 60 gL-1 and a pH of 6,0 were carried out. A maximum of 47,63 gL-1 of lactic acid concentration, 95,4% of substrate conversion and 83 gg-1were obtained from the mixture of strains after a fermentation of 48 h.