Association between urinary BTEX metabolites and dyslexic odds among school-aged children.

Benzene, toluene, ethylbenzene, and xylene (BTEX) are ubiquitous in the environment, and all of them can cause neurotoxicity. However, the association between BTEX exposure and dyslexia, a disorder with language network-related regions in left hemisphere affected, remains unclear. We aimed to assess the relationship between BTEX exposure and dyslexic odds among school-aged children. A case-control study, including 355 dyslexics and 390 controls from three cities in China, was conducted. Six BTEX metabolites were measured in their urine samples. Logistic regression model was used to explore the association between the BTEX metabolites and the dyslexic odds. Urinary trans,trans-muconic acid (MU: a metabolite of benzene) was significantly associated with an increased dyslexic odds [odds ratio (OR) = 1.23, 95% confidence interval (CI): 1.01, 1.50], and the adjusted OR of the dyslexic odds in the third tertile was 1.72 (95% CI: 1.06, 2.77) compared to that in the lowest tertile regarding urinary MU concentration. Furthermore, the association between urinary MU level and the dyslexic odds was more pronounced among children from low-income families based on stratified analyses. Urinary metabolite levels of toluene, ethylbenzene, and xylene were not found to be associated with the dyslexic odds. In summary, elevated MU concentrations may be associated with an increased dyslexic odds. We should take measures to reduce MU related exposure among children, particularly those with low family income.

Genome-wide host-pathway interactions affecting cis-cis-muconic acid production in yeast.

The success of forward metabolic engineering depends on a thorough understanding of the behaviour of a heterologous metabolic pathway within its host. We have recently described CRI-SPA, a high-throughput gene editing method enabling the delivery of a metabolic pathway to all strains of the Saccharomyces cerevisiae knock-out library. CRI-SPA systematically quantifies the effect of each modified gene present in the library on product synthesis, providing a complete map of host:pathway interactions. In its first version, CRI-SPA relied on the colour of the product betaxanthins to quantify strains synthesis ability. However, only a few compounds produce a visible or fluorescent phenotype limiting the scope of our approach. Here, we adapt CRI-SPA to onboard a biosensor reporting the interactions between host genes and the synthesis of the colourless product cis-cis-muconic acid (CCM). We phenotype >9,000 genotypes, including both gene knock-out and overexpression, by quantifying the fluorescence of yeast colonies growing in high-density agar arrays. We identify novel metabolic targets belonging to a broad range of cellular functions and confirm their positive impact on CCM biosynthesis. In particular, our data suggests a new interplay between CCM biosynthesis and cytosolic redox through their common interaction with the oxidative pentose phosphate pathway. Our genome-wide exploration of host:pathway interaction opens novel strategies for improved production of CCM in yeast cell factories.

Corynebacterium glutamicum cell factory design for the efficient production of cis, cis-muconic acid.

Cis, cis-muconic acid (MA) is widely used as a key starting material in the synthesis of diverse polymers. The growing demand in these industries has led to an increased need for MA. Here, we constructed recombinant Corynebacterium glutamicum by systems metabolic engineering, which exhibit high efficiency in the production of MA. Firstly, the three major degradation pathways were disrupted in the MA production process. Subsequently, metabolic optimization strategies were predicted by computational design and the shikimate pathway was reconstructed, significantly enhancing its metabolic flux. Finally, through optimization and integration of key genes involved in MA production, the recombinant strain produced 88.2 g/L of MA with the yield of 0.30 mol/mol glucose in the 5 L bioreactor. This titer represents the highest reported titer achieved using glucose as the carbon source in current studies, and the yield is the highest reported for MA production from glucose in Corynebacterium glutamicum. Furthermore, to enable the utilization of more cost-effective glucose derived from corn straw hydrolysate, we subjected the strain to adaptive laboratory evolution in corn straw hydrolysate. Ultimately, we successfully achieved MA production in a high solid loading of corn straw hydrolysate (with the glucose concentration of 83.56 g/L), resulting in a titer of 19.9 g/L for MA, which is 4.1 times higher than that of the original strain. Additionally, the glucose yield was improved to 0.33 mol/mol. These provide possibilities for a greener and more sustainable production of MA.

Valorization of Polyethylene Terephthalate to Muconic Acid by Engineering Pseudomonas Putida.

Plastic waste is rapidly accumulating in the environment and becoming a huge global challenge. Many studies have highlighted the role of microbial metabolic engineering for the valorization of polyethylene terephthalate (PET) waste. In this study, we proposed a new conceptual scheme for upcycling of PET. We constructed a multifunctional Pseudomonas putida KT2440 to simultaneously secrete PET hydrolase LCC, a leaf-branch compost cutinase, and synthesize muconic acid (MA) using the PET hydrolysate. The final product MA and extracellular LCC can be separated from the supernatant of the culture by ultrafiltration, and the latter was used for the next round of PET hydrolysis. A total of 0.50 g MA was produced from 1 g PET in each cycle of the whole biological processes, reaching 68% of the theoretical conversion. This new conceptual scheme for the valorization of PET waste should have advantages over existing PET upcycling schemes and provides new ideas for the utilization of other macromolecular resources that are difficult to decompose, such as lignin.

Muconic acid production from glucose and xylose in Pseudomonas putida via evolution and metabolic engineering.

Muconic acid is a bioprivileged molecule that can be converted into direct replacement chemicals for incumbent petrochemicals and performance-advantaged bioproducts. In this study, Pseudomonas putida KT2440 is engineered to convert glucose and xylose, the primary carbohydrates in lignocellulosic hydrolysates, to muconic acid using a model-guided strategy to maximize the theoretical yield. Using adaptive laboratory evolution (ALE) and metabolic engineering in a strain engineered to express the D-xylose isomerase pathway, we demonstrate that mutations in the heterologous D-xylose:H+ symporter (XylE), increased expression of a major facilitator superfamily transporter (PP_2569), and overexpression of aroB encoding the native 3-dehydroquinate synthase, enable efficient muconic acid production from glucose and xylose simultaneously. Using the rationally engineered strain, we produce 33.7 g L-1 muconate at 0.18 g L-1 h-1 and a 46% molar yield (92% of the maximum theoretical yield). This engineering strategy is promising for the production of other shikimate pathway-derived compounds from lignocellulosic sugars.

Comparing in planta accumulation with microbial routes to set targets for a cost-competitive bioeconomy.

Plants and microbes share common metabolic pathways for producing a range of bioproducts that are potentially foundational to the future bioeconomy. However, in planta accumulation and microbial production of bioproducts have never been systematically compared on an economic basis to identify optimal routes of production. A detailed technoeconomic analysis of four exemplar compounds (4-hydroxybenzoic acid [4-HBA], catechol, muconic acid, and 2-pyrone-4,6-dicarboxylic acid [PDC]) is conducted with the highest reported yields and accumulation rates to identify economically advantaged platforms and breakeven targets for plants and microbes. The results indicate that in planta mass accumulation ranging from 0.1 to 0.3 dry weight % (dwt%) can achieve costs comparable to microbial routes operating at 40 to 55% of maximum theoretical yields. These yields and accumulation rates are sufficient to be cost competitive if the products are sold at market prices consistent with specialty chemicals ($20 to $50/kg). Prices consistent with commodity chemicals will require an order-of-magnitude-greater accumulation rate for plants and/or yields nearing theoretical maxima for microbial production platforms. This comparative analysis revealed that the demonstrated accumulation rates of 4-HBA (3.2 dwt%) and PDC (3.0 dwt%) in engineered plants vastly outperform microbial routes, even if microbial platforms were to reach theoretical maximum yields. Their recovery and sale as part of a lignocellulosic biorefinery could enable biofuel prices to be competitive with petroleum. Muconic acid and catechol, in contrast, are currently more attractive when produced microbially using a sugar feedstock. Ultimately, both platforms can play an important role in replacing fossil-derived products.

Pseudomonas sp. NGC7 as a microbial chassis for glucose-free muconate production from a variety of lignin-derived aromatics and its application to the production from sugar cane bagasse alkaline extract.

cis,cis-Muconate (ccMA) is a promising platform for use in synthesizing various polymers. A glucose-free ccMA production using Pseudomonas sp. NGC7 from hardwood lignin-derived aromatic compounds was previously reported. In that system, syringyl nucleus compounds were essential for growth. Here, it is shown that NGC7 is available for glucose-free ccMA production even from a mixture of lignin-derived aromatics that does not contain syringyl nucleus compounds. By introducing a gene set for the protocatechuate (PCA)-shunt consisting of PCA 3,4-dioxygenase and PCA decarboxylase into an NGC7-derived strain deficient in PCA 3,4-dioxygenase and ccMA cycloisomerase, it was succeeded in constructing a ccMA-producing strain that grows on a lignin-derived aromatics mixture containing no syringyl nucleus compounds. Finally, it is demonstrated that the engineered strain produced ccMA from sugar cane bagasse alkaline extract in 18.7 mol%. NGC7 is thus shown to be a promising microbial chassis for biochemicals production from lignin-derived aromatics.

An integrated yeast-based process for cis,cis-muconic acid production.

Cis,cis-muconic acid (CCM) is a promising polymer building block. CCM can be made by whole-cell bioconversion of lignin hydrolysates or de novo biosynthesis from sugar feedstocks using engineered microorganisms. At present, however, there is no established process for large-scale CCM production. In this study, we developed an integrated process for manufacturing CCM from glucose by yeast fermentation. We systematically engineered the CCM-producing Saccharomyces cerevisiae strain by rewiring the shikimate pathway flux and enhancing phosphoenolpyruvate supply. The engineered strain ST10209 accumulated less biomass but produced 1.4 g/L CCM (70 mg CCM per g glucose) in microplate assay, 71% more than the previously engineered strain ST8943. The strain ST10209 produced 22.5 g/L CCM in a 2 L fermenter with a productivity of 0.19 g/L/h, compared to 0.14 g/L/h achieved by ST8943 in our previous report under the same fermentation conditions. The fermentation process was demonstrated at pilot scale in 10 and 50 L steel tanks. In 10 L fermenter, ST10209 produced 20.8 g/L CCM with a CCM yield of 0.1 g/g glucose and a productivity of 0.21 g/L/h, representing the highest to-date CCM yield and productivity. We developed a CCM recovery and purification process by treating the fermentation broth with activated carbon at low pH and low temperature, achieving an overall CCM recovery yield of 66.3% and 95.4% purity. In summary, we report an integrated CCM production process employing engineered S. cerevisiae yeast.

Biomatrix of health risk assessment of benzene-exposed workers at Thai gasoline stations.

OBJECTIVE: This study assessed the health risk of benzene exposure among Thai gasoline station workers through biomarker detection and experience of adverse symptoms. METHODS: Trans, trans-muconic acid (tt-MA) metabolites of benzene were analyzed from spot urine sampled among gasoline station workers after shift work using HPLC-UV. Air benzene monitoring was done with an active sampler connected to a charcoal sorbent tube, and analyzed by GC-FID. The health risk was calculated by using the biomatrix of the likelihood of benzene exposure and the severity of adverse symptoms. RESULTS: The tt-MA concentration, among 235 workers, ranged from less than 10-2159 µg/g Cr, which corresponded to the air benzene concentration range of <0.1 to 65.8 ppb. In total, 32.3% of workers had a higher than acceptable risk level and there was a significant association between gasoline station work zones and the likelihood of benzene exposure as well as the health risk of workers. The health risk levels estimated from the biomarker monitoring were consistent with the risk matrix of air benzene monitoring. CONCLUSION: This tt-MA biomarker monitoring and biomatrix of health risk assessment is suggested as useful for health surveillance of gasoline station workers exposed to benzene.

Biological upgrading of pyrolysis-derived wastewater: Engineering Pseudomonas putida for alkylphenol, furfural, and acetone catabolism and (methyl)muconic acid production.

While biomass-derived carbohydrates have been predominant substrates for biological production of renewable fuels, chemicals, and materials, organic waste streams are growing in prominence as potential alternative feedstocks to improve the sustainability of manufacturing processes. Catalytic fast pyrolysis (CFP) is a promising approach to generate biofuels from lignocellulosic biomass, but it generates a complex, carbon-rich, and toxic wastewater stream that is challenging to process catalytically but could be biologically upgraded to valuable co-products. In this work, we implemented modular, heterologous catabolic pathways in the Pseudomonas putida KT2440-derived EM42 strain along with the overexpression of native toxicity tolerance machinery to enable utilization of 89% (w/w) of carbon in CFP wastewater. The dmp monooxygenase and meta-cleavage pathway from Pseudomonas putida CF600 were constitutively expressed to enable utilization of phenol, cresols, 2- and 3-ethyl phenol, and methyl catechols, and the native chaperones clpB, groES, and groEL were overexpressed to improve toxicity tolerance to diverse aromatic substrates. Next, heterologous furfural and acetone utilization pathways were incorporated, and a native alcohol dehydrogenase was overexpressed to improve methanol utilization, generating reducing equivalents. All pathways (encoded by genes totaling ~30 kilobases of DNA) were combined into a single strain that can catabolize a mock CFP wastewater stream as a sole carbon source. Further engineering enabled conversion of all aromatic compounds in the mock wastewater stream to (methyl)muconates with a ~90% (mol/mol) yield. Biological upgrading of CFP wastewater as outlined in this work provides a roadmap for future applications in valorizing other heterogeneous waste streams.

In-syringe ionic liquid-dispersive liquid-liquid microextraction coupled with HPLC for the determination of trans,trans-muconic acid in human urine sample.

trans,trans-Muconic acid has been widely used as a biomarker in biological monitoring of benzene-exposed workers during routine occupational health services. In the present study, a novel microextraction technique, in-syringe ionic liquid-dispersive liquid-liquid microextraction, was implemented for preconcentration of trans,trans-muconic acid followed by analytical determination by high-performance liquid chromatography with ultraviolet detection. Moreover, the important variables affecting the performance of applied microextraction technique including needle diameter, volume of the spiked sample, volume of the ionic liquid, salt addition, rotation speed of centrifugation, centrifuge time, and ultrasonic time were optimized by experimental design. A good linear relationship was observed at the range of 0.032-10 µg/mL between the peak area and the concentration levels (R2  = 0.9997). The limit of detection and extraction recovery for trans,trans-muconic acid were 0.011 µg/mL and >96.2%, respectively. This method provided easy and rapid analysis of low amounts of trans,trans-muconic acid in human urine with simple equipment.

In-situ muconic acid extraction reveals sugar consumption bottleneck in a xylose-utilizing Saccharomyces cerevisiae strain.

BACKGROUND: The current shift from a fossil-resource based economy to a more sustainable, bio-based economy requires development of alternative production routes based on utilization of biomass for the many chemicals that are currently produced from petroleum. Muconic acid is an attractive platform chemical for the bio-based economy because it can be converted in chemicals with wide industrial applicability, such as adipic and terephthalic acid, and because its two double bonds offer great versatility for chemical modification. RESULTS: We have constructed a yeast cell factory converting glucose and xylose into muconic acid without formation of ethanol. We consecutively eliminated feedback inhibition in the shikimate pathway, inserted the heterologous pathway for muconic acid biosynthesis from 3-dehydroshikimate (DHS) by co-expression of DHS dehydratase from P. anserina, protocatechuic acid (PCA) decarboxylase (PCAD) from K. pneumoniae and oxygen-consuming catechol 1,2-dioxygenase (CDO) from C. albicans, eliminated ethanol production by deletion of the three PDC genes and minimized PCA production by enhancing PCAD overexpression and production of its co-factor. The yeast pitching rate was increased to lower high biomass formation caused by the compulsory aerobic conditions. Maximal titers of 4 g/L, 4.5 g/L and 3.8 g/L muconic acid were reached with glucose, xylose, and a mixture, respectively. The use of an elevated initial sugar level, resulting in muconic acid titers above 2.5 g/L, caused stuck fermentations with incomplete utilization of the sugar. Application of polypropylene glycol 4000 (PPG) as solvent for in situ product removal during the fermentation shows that this is not due to toxicity by the muconic acid produced. CONCLUSIONS: This work has developed an industrial yeast strain able to produce muconic acid from glucose and also with great efficiency from xylose, without any ethanol production, minimal production of PCA and reaching the highest titers in batch fermentation reported up to now. Utilization of higher sugar levels remained conspicuously incomplete. Since this was not due to product inhibition by muconic acid or to loss of viability, an unknown, possibly metabolic bottleneck apparently arises during muconic acid fermentation with high sugar levels and blocks further sugar utilization.

Integrating continuous hypermutation with high-throughput screening for optimization of cis,cis-muconic acid production in yeast.

Directed evolution is a powerful method to optimize proteins and metabolic reactions towards user-defined goals. It usually involves subjecting genes or pathways to iterative rounds of mutagenesis, selection and amplification. While powerful, systematic searches through large sequence-spaces is a labour-intensive task, and can be further limited by a priori knowledge about the optimal initial search space, and/or limits in terms of screening throughput. Here, we demonstrate an integrated directed evolution workflow for metabolic pathway enzymes that continuously generate enzyme variants using the recently developed orthogonal replication system, OrthoRep and screens for optimal performance in high-throughput using a transcription factor-based biosensor. We demonstrate the strengths of this workflow by evolving a rate-limiting enzymatic reaction of the biosynthetic pathway for cis,cis-muconic acid (CCM), a precursor used for bioplastic and coatings, in Saccharomyces cerevisiae. After two weeks of simply iterating between passaging of cells to generate variant enzymes via OrthoRep and high-throughput sorting of best-performing variants using a transcription factor-based biosensor for CCM, we ultimately identified variant enzymes improving CCM titers > 13-fold compared with reference enzymes. Taken together, the combination of synthetic biology tools as adopted in this study is an efficient approach to debottleneck repetitive workflows associated with directed evolution of metabolic enzymes.

An Improved CRISPR Interference Tool to Engineer Rhodococcus opacus.

Rhodococcus opacus is a nonmodel bacterium that is well suited for valorizing lignin. Despite recent advances in our systems-level understanding of its versatile metabolism, studies of its gene functions at a single gene level are still lagging. Elucidating gene functions in nonmodel organisms is challenging due to limited genetic engineering tools that are convenient to use. To address this issue, we developed a simple gene repression system based on CRISPR interference (CRISPRi). This gene repression system uses a T7 RNA polymerase system to express a small guide RNA, demonstrating improved repression compared to the previously demonstrated CRISPRi system (i.e., the maximum repression efficiency improved from 58% to 85%). Additionally, our cloning strategy allows for building multiple CRISPRi plasmids in parallel without any PCR step, facilitating the engineering of this GC-rich organism. Using the improved CRISPRi system, we confirmed the annotated roles of four metabolic pathway genes, which had been identified by our previous transcriptomic analysis to be related to the consumption of benzoate, vanillate, catechol, and acetate. Furthermore, we showed our tool's utility by demonstrating the inducible accumulation of muconate that is a precursor of adipic acid, an important monomer for nylon production. While the maximum muconate yield obtained using our tool was 30% of the yield obtained using gene knockout, our tool showed its inducibility and partial repressibility. Our CRISPRi tool will be useful to facilitate functional studies of this nonmodel organism and engineer this promising microbial chassis for lignin valorization.

Thermal behavior of food preservative sorbic acid and its derivates.

Sorbic acid and its potassium and calcium salts used as food preservatives and sorbic chloride were submitted to thermal analysis in order to characterize their thermal behavior on heating and cooling processes, using TG/DTG/DTA, TG-MS, DSC, hot stage microscopy and DRX analysis. Sorbic acid melted and decomposed under dynamic heating. Under isothermal it sublimated without decomposition before melting (T < 134 °C). The potassium salt presented a solid-solid phase transition before decomposition. Both potassium and calcium salts decomposed in temperatures higher than the acid without melting, producing the respective carbonates and oxides as final residues. Sorbic chloride evaporate without condensation, on dynamic heating.

A Nanoprobe Based on Gated Mesoporous Silica Nanoparticles for The Selective and Sensitive Detection of Benzene Metabolite t,t-Muconic Acid in Urine.

Benzene is a highly toxic aromatic hydrocarbon. Inhaling benzene can cause dizziness, vertigo, headaches, aplasia, mutations and, in the most extreme cases, cancer. Trans,trans-muconic acid (t,t-MA) is one of the metabolization products of benzene. Although different analytical methods have been reported for the determination of t,t-MA, these are often expensive, require trained personnel, are not suitable for on-site measurements, and use hazardous organic solvents. For these reasons, the development of reliable, selective and sensitive methods for rapid and in situ detection of t,t-MA are of importance. Addressing this challenge, a nanodevice for the selective and sensitive quantification of t,t-MA in urine is reported. The nanodevice used is achieved using mesoporous silica nanoparticles loaded with a dye reporter and capped with a dicopper(II) azacryptand. Pore opening and payload release is induced rapidly (10 min) and selectively with t,t-MA in urine, using a simple fluorimeter without sample pretreatment.

Engineering an Optogenetic CRISPRi Platform for Improved Chemical Production.

Microbial synthesis of chemicals typically requires the redistribution of metabolic flux toward the synthesis of targeted products. Dynamic control is emerging as an effective approach for solving the hurdles mentioned above. As light could control the cell behavior in a spatial and temporal manner, the optogenetic-CRISPR interference (opto-CRISPRi) technique that allocates the metabolic resources according to different optical signal frequencies will enable bacteria to be controlled between the growth phase and the production stage. In this study, we applied a blue light-sensitive protein EL222 to regulate the expression of the dCpf1-mediated CRISPRi system that turns off the competitive pathways and redirects the metabolic flux toward the heterologous muconic acid synthesis in Escherichia coli. We found that the opto-CRISPRi system dynamically regulating the suppression of the central metabolism and competitive pathways could increase the muconic acid production by 130%. These results demonstrated that the opto-CRISPRi platform is an effective method for enhancing chemical synthesis with broad utilities.

Determination of phenol biodegradation pathways in three psychrotolerant yeasts, Candida subhashii A011, Candida oregonensis B021 and Schizoblastosporion starkeyi-henricii L012, isolated from Rucianka peatland.

In this study, three psychrotolerant phenol-degrading yeast strains Candida subhashii (strain A011), Candida oregonenis (strain B021) and Schizoblastosporion starkeyi-henricii (strain L012) isolated from Rucianka peatland were examined to determine which alternative metabolic pathway for phenol biodegradation is used by these microorganisms. All yeast strains were cultivated in minimal salt medium supplemented with phenol at 500, 750 and 1000 mg l-1 concentration with two ways of conducting phenol biodegradation experiments: with and without the starving step of yeast cells. For studied yeast strains, no catechol 2,3-dioxygenase activities were detected by enzymatic assay and no products of catechol meta-cleavage in yeast cultures supernatants (GC-MS analysis), were detected. The detection of catechol 1,2-dioxygenase activity and the presence of cis,cis-muconic acid in the analyzed samples revealed that all studied psychrotolerant yeast strains were able to metabolize phenol via the ortho-cleavage pathway. Therefore, they may be tested in terms of their use to develop biotechnology for the production of cis,cis-muconic acid, a substrate used in the production of plastics (PET) and other valuable goods.

Biological Monitoring of Exposure to Benzene in Port Workers.

Port workers are exposed to a wide range of occupational hazards that can cause injuries and occupational diseases. Among these, exposure to benzene is one of the most important but least studied. The highest occupational exposures for port workers occur during the filling and loading of gasoline, and cleaning of tanks and receptacles. The aim of the study was to evaluate occupational exposure to low levels of benzene by measuring trans,trans-muconic acid (t,t-MA) in urine samples from workers operating at fuelling stations in a tourist port of Southern Italy. The overall sample was composed of 43 port workers of a tourist port in Southern Italy. In 2018, each participant provided two (morning and evening) urine samples for the determination of urinary t,t-MA. Urinary excretion of t,t-MA was always higher at the end of the work shift than at the beginning with significant difference (p = 0.002). In smokers, median t,t-MA urinary excretion is higher than non-smokers both at the beginning (90.5 µg/g creatinine vs. 61.45 µg/g creatinine) and at the end of the work shift (128.2 µg/g creatinine vs. 89.5 µg/g creatinine). Urinary excretion of t,t-MA is higher at the end of the work shift than at the beginning in both smokers and non-smokers, but the difference is significantly higher in non-smokers (p = 0.003) than in smokers (p = 0.05). In conclusion, our results showed that the role of inhaled benzene at fuelling stations in a tourist port can be relevant. On the basis of these results and the known adverse effects of benzene on human health, we encourage the use of personal protective equipment in the fuelling area of ports in order to minimize exposure to benzene to workers.

Recent Advances in Microbial Production of cis,cis-Muconic Acid.

cis,cis-Muconic acid (MA) is a valuable C6 dicarboxylic acid platform chemical that is used as a starting material for the production of various valuable polymers and drugs, including adipic acid and terephthalic acid. As an alternative to traditional chemical processes, bio-based MA production has progressed to the establishment of de novo MA pathways in several microorganisms, such as Escherichia coli, Corynebacterium glutamicum, Pseudomonas putida, and Saccharomyces cerevisiae. Redesign of the metabolic pathway, intermediate flux control, and culture process optimization were all pursued to maximize the microbial MA production yield. Recently, MA production from biomass, such as the aromatic polymer lignin, has also attracted attention from researchers focusing on microbes that are tolerant to aromatic compounds. This paper summarizes recent microbial MA production strategies that involve engineering the metabolic pathway genes as well as the heterologous expression of some foreign genes involved in MA biosynthesis. Microbial MA production will continue to play a vital role in the field of bio-refineries and a feasible way to complement various petrochemical-based chemical processes.