Efficient activation of peracetic acid by cobalt modified nitrogen-doped carbon nanotubes for drugs degradation: Performance and mechanism insight.

Peracetic acid (PAA) has garnered significant attention as a novel disinfectant owing to its remarkable oxidative capacity and minimal potential to generate byproducts. In this study, we prepared a novel catalyst, denoted as cobalt modified nitrogen-doped carbon nanotubes (Co@N-CNTs), and evaluated it for PAA activation. Modification with cobalt nanoparticles (∼4.8 nm) changed the morphology and structure of the carbon nanotubes, and greatly improved their ability to activate PAA. Co@N-CNTs/PAA catalytic system shows outstanding catalytic degradation ability of antiviral drugs. Under neutral conditions, with a dosage of 0.05 g/L Co@N-CNT-9.8 and 0.25 mM PAA, the removal efficiency of acyclovir (ACV) reached 98.3% within a mere 10 min. The primary reactive species responsible for effective pollutant degradation were identified as acetylperoxyl radicals (CH3C(O)OO•) and acetyloxyl radicals (CH3C(O)O•). In addition, density functional theory (DFT) proved that Co nanoparticles, as the main catalytic sites, were more likely to adsorb PAA and transfer more electrons than N-doped graphene. This study explored the feasibility of PAA degradation of antiviral drugs in sewage, and provided new insights for the application of heterogeneous catalytic PAA in environmental remediation.

Computational analysis of antiviral drugs using topological descriptors.

Many health challenges are attributed to viral infections, which represent significant concerns in public health. Among these infections, diseases such as herpes simplex virus (HSV), cytomegalovirus (CMV), and varicella-zoster virus (VZV) infections have garnered attention due to their prevalence and impact on human health. There are specific antiviral medications available for the treatment of these viral infections. Drugs like Cidofovir, Valacyclovir, and Acyclovir are commonly prescribed. These antiviral drugs are known for their efficacy against herpesviruses and related viral infections, leveraging their ability to inhibit viral DNA polymerase. A molecular descriptor is a numerical value that correlates with specific physicochemical properties of a molecular graph. This article explores the calculation of distance-based topological descriptors, including the Trinajstic, Mostar, Szeged, and PI descriptors for the aforementioned antiviral drugs. These descriptors provide insights into these drugs' structural and physicochemical characteristics, aiding in understanding their mechanism of action and the development of new therapeutic agents.

Synthetic derivatives of the antifungal drug ciclopirox are active against herpes simplex virus 2.

We previously showed that the anti-fungal drug ciclopirox olamine effectively inhibits replication of herpes simplex virus (HSV)-1 and HSV-2. Given the rise of HSV strains that are resistant to nucleos(t)ide analog treatment, as well as the incomplete efficacy of nucleos(t)ide analogs, new inhibitory compounds must be explored for potential use in the treatment of HSV infection. In the present study, we analyzed 44 compounds derived from the core structure of ciclopirox olamine for inhibitory activity against HSV. Thirteen of these derivative compounds inhibited HSV-2 replication by > 1000- to ∼100,000-fold at 1 µM and displayed EC50 values lower than that of acyclovir, as well as low cytotoxicity, indicating their strong therapeutic potential. Through structural comparison, we also provide evidence for the importance of various structural motifs to the efficacy of ciclopirox and its derivatives, namely hydrophobic groups at R4 and R6 of the ciclopirox core structure. Like ciclopirox, representative analogs exhibit some oral bioavailability but are rapidly cleared in vivo. Together, these results will guide further development of N-hydroxypyridones as HSV therapeutics.

Enzyme Models-From Catalysis to Prodrugs.

Enzymes are highly specific biological catalysts that accelerate the rate of chemical reactions within the cell. Our knowledge of how enzymes work remains incomplete. Computational methodologies such as molecular mechanics (MM) and quantum mechanical (QM) methods play an important role in elucidating the detailed mechanisms of enzymatic reactions where experimental research measurements are not possible. Theories invoked by a variety of scientists indicate that enzymes work as structural scaffolds that serve to bring together and orient the reactants so that the reaction can proceed with minimum energy. Enzyme models can be utilized for mimicking enzyme catalysis and the development of novel prodrugs. Prodrugs are used to enhance the pharmacokinetics of drugs; classical prodrug approaches focus on alternating the physicochemical properties, while chemical modern approaches are based on the knowledge gained from the chemistry of enzyme models and correlations between experimental and calculated rate values of intramolecular processes (enzyme models). A large number of prodrugs have been designed and developed to improve the effectiveness and pharmacokinetics of commonly used drugs, such as anti-Parkinson (dopamine), antiviral (acyclovir), antimalarial (atovaquone), anticancer (azanucleosides), antifibrinolytic (tranexamic acid), antihyperlipidemia (statins), vasoconstrictors (phenylephrine), antihypertension (atenolol), antibacterial agents (amoxicillin, cephalexin, and cefuroxime axetil), paracetamol, and guaifenesin. This article describes the works done on enzyme models and the computational methods used to understand enzyme catalysis and to help in the development of efficient prodrugs.

In Vitro Release Testing of Acyclovir Topical Formulations Using Immersion Cells.

The objective of the study was to reinforce the applicability of the immersion cells for the in vitro release testing (IVRT) of topical formulations by using marketed acyclovir 5% cream formulation (Cream 1) as a model. The method employing the immersion cells was optimized by studying the effect of variables, such as membrane type, media temperature and volume, agitation speed, and cell size, on acyclovir release from the formulation. The in-house formulation similar to the qualitative and quantitative composition of Cream 1 and the other trial formulations with variable compositions were prepared and studied by using the immersion cells. Various other brands of acyclovir topical formulations available in the Indian market were also subjected to IVRT by using the optimized method. An increase in the media temperature from 32°C to 37°C and the stirring speed from 50 to 100 to 150 rpm led to an increase in the drug release. As the immersion cell size increased (0.5, 2 and 4 cm2 surface area), the release rate also increased. Nitrocellulose membrane showed the highest drug release and Fluoropore™the least. The optimized IVRT method could establish the differences in the drug release rates among the formulations with the altered compositions. The method could also prove its discriminatory potential for various marketed formulations. The immersion cell method could serve as a simpler, facile, and reliable aid during product development and also as a quality control tool in assessing stability, aging, and batch-to-batch uniformity of semisolid formulations.

Are Myths and Preconceptions Preventing us from Applying Ionic Liquid Forms of Antiviral Medicines to the Current Health Crisis?

At the moment, there are no U.S. Food and Drug Administration (U.S. FDA)-approved drugs for the treatment of COVID-19, although several antiviral drugs are available for repurposing. Many of these drugs suffer from polymorphic transformations with changes in the drug's safety and efficacy; many are poorly soluble, poorly bioavailable drugs. Current tools to reformulate antiviral APIs into safer and more bioavailable forms include pharmaceutical salts and cocrystals, even though it is difficult to classify solid forms into these regulatory-wise mutually exclusive categories. Pure liquid salt forms of APIs, ionic liquids that incorporate APIs into their structures (API-ILs) present all the advantages that salt forms provide from a pharmaceutical standpoint, without being subject to solid-state matter problems. In this perspective article, the myths and the most voiced concerns holding back implementation of API-ILs are examined, and two case studies of API-ILs antivirals (the amphoteric acyclovir and GSK2838232) are presented in detail, with a focus on drug property improvement. We advocate that the industry should consider the advantages of API-ILs which could be the genesis of disruptive innovation and believe that in order for the industry to grow and develop, the industry should be comfortable with a certain element of risk because progress often only comes from trying something different.

Virtual screening, ADME/T, and binding free energy analysis of anti-viral, anti-protease, and anti-infectious compounds against NSP10/NSP16 methyltransferase and main protease of SARS CoV-2.

Recently, a pathogen has been identified as a novel coronavirus (SARS-CoV-2) and found to trigger novel pneumonia (COVID-19) in human beings and some other mammals. The uncontrolled release of cytokines is seen from the primary stages of symptoms to last acute respiratory distress syndrome (ARDS). Thus, it is necessary to find out safe and effective drugs against this deadly coronavirus as soon as possible. Here, we downloaded the three-dimensional model of NSP10/NSP16 methyltransferase (PDB-ID: 6w6l) and main protease (PDB-ID: 6lu7) of COVID-19. Using these molecular models, we performed virtual screening with our anti-viral, inti-infectious, and anti-protease compounds, which are attractive therapeutics to prevent infection of the COVID-19. We found that top screened compound binds with protein molecules with good dock score with the help of hydrophobic interactions and hydrogen bonding. We observed that protease complexed with Cyclocytidine hydrochloride (anti-viral and anti-cancer), Trifluridine (anti-viral), Adonitol, and Meropenem (anti-bacterial), and Penciclovir (anti-viral) bound with a good docking score ranging from -6.8 to -5.1 (Kcal/mol). Further, NSP10/NSP16 methyltransferase complexed with Telbivudine, Oxytetracycline dihydrate (anti-viral), Methylgallate (anti-malarial), 2-deoxyglucose and Daphnetin (anti-cancer) from the docking score of -7.0 to -5.7 (Kcal/mol). In conclusion, the selected compounds may be used as a novel therapeutic agent to combat this deadly pandemic disease, SARS-CoV-2 infection, but needs further experimental research.HighlightsNSP10/NSP16 methyltransferase and main protease complex of SARS CoV-2 bind with selected drugs.NSP10/NSP16 methyltransferase and protease interacted with drugs by hydrophobic interactions.Compounds show good DG binging free energy with protein complexes.Ligands were found to follow the Lipinski rule of five.

Tricyclic Derivative of Acyclovir and Its Esters in Relation to the Esters of Acyclovir Enzymatic Stability: Enzymatic Stability Study.

The 3,9-dihydro-3-[(2-hydroxyethoxy)methyl]-6-(4-methoxyphenyl)-9-oxo-5H-imidazo[1,2-a]-purine (6-(4-MeOPh)-TACV) was selected to assess the enzymatic stability of the tricyclic acyclovir derivatives from the imidazo[1,2-a]-purine group. The parent compound and its esters (acetyl, isobutyryl, pivaloyl, nicotinic, ethoxycarbonyl) were subjected to kinetic studies and compared with the stability of analogous acyclovir (ACV) esters. The enzymatic hydrolysis was observed in vitro in a medium of 80% human plasma in the absence and presence of porcine liver esterase (PLE). The tests were carried out at 37 °C. To determine the kinetic parameters (kobs., t0.5) of the observed reaction, the validated HPLC-UV method in the reversed phase was used. The HPLC-MS/MS method was used to identify the degradation products under the tested conditions. In summary, it was found that 6-(4-MeOPh)-TACV esters are more susceptible to esterase metabolism than ACV esters. It was confirmed by HPLC-MS/MS that in the plasma, the main product of their hydrolysis is 6-(4-MeOPh)-TACV and not ACV, which confirms that their antiviral activity observed in vitro does not result from ring degradation.

Choline and amino acid based biocompatible ionic liquid mediated transdermal delivery of the sparingly soluble drug acyclovir.

Transdermal delivery of drugs is more challenging for drugs that are insoluble or sparingly soluble in water and most organic solvents. To overcome this problem, ionic liquid (IL)-mediated ternary systems have been suggested as potential drug carriers. Here, we report potent ternary (IL-EtOH-IPM) systems consisting of biocompatible ILs, ethanol (EtOH), and isopropyl myristate (IPM) that can dissolve a significant amount of the sparingly soluble drug acyclovir (ACV). The ternary systems were optically transparent and thermodynamically stable with a wide range of IL pertinence. An in vitro drug permeation study showed that the ILs in the ternary systems dramatically enhanced ACV permeation into and across the skin. Fourier Transform Infrared spectroscopy of the stratum corneum (sc) after treatment with ternary systems showed that the skin barrier function was reduced by disturbance of the regularly ordered arrangement of corneocytes and modification of the surface properties of the sc during permeation. Histological analysis, and skin irritation studies using a reconstructed human epidermis model showed the safety profile of the ternary system, and there were no significant changes in the structures of the sc, epidermis, and dermis. Therefore, ternary systems containing biocompatible ILs are promising for transdermal delivery of insoluble or sparingly soluble drugs.

Modifications on the heterocyclic base of ganciclovir, penciclovir, acyclovir - syntheses and antiviral properties.

АBSTRACTEsters of the antiherpetic drugs ganciclovir, penciclovir with the bile acids (cholic, chenodeoxycholic and deoxycholic) and amino acid esters of acyclovir were generated and evaluated for their in vitro antiviral activity against herpes simplex viruses type 1 and type 2 (HSV-1, HSV-2). The antiviral assays demonstrated that modified analogs of ACV and PCV are less active compared to the initial substances against HSV-1and HSV-2. CC50 for ganciclovir-deoxycholate corresponded to the CC50 of the other analogs and its activity is lower than ganciclovir. Obtained results show that tested modification do not improve bioavailability of nucleoside analogs in cells.

Modified cyclodextrins as broad-spectrum antivirals.

Viral infections kill millions of people and new antivirals are needed. Nontoxic drugs that irreversibly inhibit viruses (virucidal) are postulated to be ideal. Unfortunately, all virucidal molecules described to date are cytotoxic. We recently developed nontoxic, broad-spectrum virucidal gold nanoparticles. Here, we develop further the concept and describe cyclodextrins, modified with mercaptoundecane sulfonic acids, to mimic heparan sulfates and to provide the key nontoxic virucidal action. We show that the resulting macromolecules are broad-spectrum, biocompatible, and virucidal at micromolar concentrations in vitro against many viruses [including herpes simplex virus (HSV), respiratory syncytial virus (RSV), dengue virus, and Zika virus]. They are effective ex vivo against both laboratory and clinical strains of RSV and HSV-2 in respiratory and vaginal tissue culture models, respectively. Additionally, they are effective when administrated in mice before intravaginal HSV-2 inoculation. Lastly, they pass a mutation resistance test that the currently available anti-HSV drug (acyclovir) fails.

Mangiferin: A promising natural xanthone from Mangifera indica for the control of acyclovir - resistant herpes simplex virus 1 infection.

Mangiferin is found in many plant species as the mango tree (Mangifera indica) with ethnopharmacological applications and scientific evidence. The emergence of resistant herpes simplex virus (HSV) strains to Acyclovir (ACV) has encouraged the search for new drugs. We investigated the in vitro and in vivo activity of mangiferin obtained from M. indica against ACV-resistant HSV-1 (AR-29) and sensitive (KOS) strains. The in vitro activity was performed under varying treatment protocols. The substance showed a CC50 > 500 µg/mL and IC50 of 2.9 µg/mL and 3.5 µg/mL, respectively, for the AR-29 and KOS strains. The in vivo activity was performed in Balb/c mice treated with 0.7% topical mangiferin formulation. This formulation inhibited most effectively the AR-29 strain, attenuated the lesions, postponed their appearance or enhanced healing, in comparison to control group. We demonstrated the potentiality of mangiferin from M. indica to control HSV replication with emphasis to ACV-resistant infection.

Development of a Population Pharmacokinetics-Based in vitro-in vivo Correlation Model for Drugs with Site-Dependent Absorption: the Acyclovir Case Study.

Acyclovir is a Biopharmaceutics Classification System (BCS) class III antiviral agent which is only absorbed in the upper part of the gastrointestinal tract. This study aimed to establish a new in vitro-in vivo correlation (IVIVC) platform based on population pharmacokinetic modeling for drugs with site-dependent absorption using acyclovir as a model drug. Three types of sustained-release (SR; 500 mg) acyclovir tablets were prepared by the wet granulation method. The in vitro dissolution profiles of the acyclovir SR tablets and the immediate-release (IR; 200 mg) were determined by the paddle method and their in vivo pharmacokinetics were evaluated in Beagle dogs. A population pharmacokinetic model was developed using S-ADAPT. By separating the dissolution and absorption processes, the population pharmacokinetic model adequately described all the in vivo pharmacokinetic data and estimated the in vivo dissolution profiles. The changes of absorption rate over time after oral administration were also successfully estimated. The parameter estimates of the in vitro and in vivo drug releases were correlated by linear regression. Finally, the in vivo pharmacokinetic profiles were well predicted by the developed IVIVC model from the in vitro dissolution data with the prediction errors within 8.26% and 10.06% for the maximum plasma concentration (Cmax) and area under the plasma concentration-time curve (AUC), respectively. The present approach provides a better understanding of the in vivo absorption for drugs that have limited absorption window and may be useful for their new formulation design and development.

Stability-indicating HPLC method for acyclovir and lidocaine in topical formulations.

A simple, rapid and accurate stability-indicating HPLC assay was developed for the determination of acyclovir and lidocaine in topical formulations. Chromatographic separation of acyclovir and lidocaine was achieved using a reversed-phase C18 column and a gradient mobile phase (20 mm ammonium acetate pH 3.5 in water and acetonitrile). The degradation products of acyclovir and lidocaine in the samples were analyzed by ultra performance liquid chromatography-time of flight mass spectrometry. The HPLC method successfully resolved the analytes from the impurities and degradation products in the topical formulation. Furthermore, the method detected the analytes from the human skin leachables following the extraction of the analytes in the skin homogenate samples. The method showed linearity over wide ranges of 5-500 and 10-200 µg/ml for acyclovir and lidocaine in the topical product, respectively, with a correlation coefficient (r2 ) >0.9995. The relative standard deviations for precision, repeatability, and robustness of the method validation assays were <2%. The skin extraction efficiency for acyclovir and lidocaine was 92.8 ± 0.7% and 91.3 ± 3.2%, respectively, with no interference from the skin leachables. Thus, simultaneous quantification of acyclovir and lidocaine in the topical formulations was achieved.

Systematic approach to elucidate compaction behavior of acyclovir using a compaction simulator.

In this research, various approaches were attempted with a compaction simulator to investigate the unidentified compaction behavior of acyclovir, a model compound. Various indicators for the compaction behavior of acyclovir were obtained and compared with those of three commonly used excipients with relatively well-known compaction behavior. From two frequently used powder compaction models, the Heckel and Walker models, curvature of plot, yield stress, D0, SRS value, and W value were acquired. In addition, compression and elastic energies were obtained during the loading and unloading phases, respectively. The ratio of the two energies was also utilized. To characterize the mechanical properties of materials during bond formation, the radial tensile strength of powder compacts was measured. For all evaluations, the effects of compaction rate and lubrication were studied simultaneously. We found that primary particles of acyclovir were compacted mainly by plastic flow, with high viscoelasticity and low particle interactions. Their bond formation was highly sensitive to strain rate and lubrication. This study showed the potential application of a compaction simulator to elucidate the compaction behavior of a material of interest.

Formulation of acyclovir-loaded solid lipid nanoparticles: design, optimization, and in-vitro characterization.

The goal of this study was to design, optimize, and characterize Acyclovir-loaded solid lipid nanoparticles (ACV-SLNs) concerning particle size, zeta potential, entrapment efficiency, and release profile. Full factorial design (23) was applied and the independent variables were surfactant type (Tween 80 and Pluronic F68), lipid type (Stearic acid and Compritol 888 ATO), and co-surfactant type (Lecithin and Sodium deoxycholate). The microemulsion technique was used followed by ultrasonication. The ACV-SLNs had a particle size range of about 172-542 nm. The polydispersity index (PDI) was found to be between 0.193 and 0.526. Zeta potential was in the range of -25.7 to -41.6 mV indicating good physical stability. Entrapment efficiency values were in the range of 56.3-80.7%. The drug release kinetics of the prepared formulations was best fitted to Higuchi diffusion model. After storing ACV-SLNs at refrigerated condition (5 ± 3 °C) and room temperature (25 ± 2 °C) for 4 weeks; we studied the change in the particle size, PDI, and zeta potential. The selected optimized formulation (F4) was containing Compritol, Pluronic F68, and Lecithin. These results indicated the successful application of this design to optimize the ACV-SLNs as a promising delivery system.

Formulation of acyclovir-loaded solid lipid nanoparticles: 2. Brain targeting and pharmacokinetic study.

Acyclovir (ACV) is widely used in the treatment of herpes encephalitis. The present study was conducted to prepare chitosan-tween 80 coated solid lipid nanoparticles (SLNs) as a delivery system for brain targeting of ACV in rabbits. The SLNs were prepared and coated in one step by microemulsion method using a coating solution containing chitosan (0.1% w/v) and tween 80 (2% w/v) for loading sustained release ACV. In vitro characterization was performed for coated ACV-SLNs. Concerning in vivo experiments; a single intravenous bolus dose of coated ACV-SLNs was given versus free ACV solution to rabbits (62 mg/kg). Plasma pharmacokinetic parameters were calculated from the ACV concentration-time profiles in plasma using the two compartmental analysis. The values of AUC0-∞ and MRT of coated ACV-SLNs were higher than free drug by about twofold, 233.36 ± 41.56 µg.h/mL and 1.81 ± 0.36 h, respectively. The noncompartmental analysis was conducted to estimate the brain pharmacokinetic parameters. The AUC0-∞ brain/AUC0-∞ plasma ratio for coated ACV-SLNs and free ACV was 0.22 and 0.12, respectively. These results indicated the effectiveness of using coated ACV-SLNs for brain targeting.

Effect of Acyclovir Solid Lipid Nanoparticles for the Treatment of Herpes Simplex Virus (HSV) Infection in an Animal Model of HSV-1 Infection.

BACKGROUND: Acyclovir use is limited by a high frequency of administration of five times a day and low bioavailability. This leads to poor patient compliance. OBJECTIVES: To overcome the problem of frequent dosing, we used nanotechnology platform to evaluate the proof of concept of substituting multiple daily doses of acyclovir with a single dose. METHODS: Acyclovir was formulated as solid lipid nanoparticles (SLN). The nanoparticles were characterized for particle size, surface charge and morphology and in vitro drug release. The pharmacokinetic and pharmacodynamic of SLN acyclovir were compared with conventional acyclovir in a mouse model. RESULTS: SLN showed drug loading of 90.22% with 67.44% encapsulation efficiency. Particle size was found to be of 131 ± 41.41 nm. In vitro drug release showed 100% release in SIF in 7 days. AUC0-∞ (119.43 ± 28.74 µg/ml h), AUMC0-∞ (14469 ± 4261.16 µg/ml h) and MRT (120.10 ± 9.21 h) were significantly higher for ACV SLN as compared to ACV AUC0-∞ (12.22 ± 2.47 µg/ml h), AUMC0-∞ (28.78 ± 30.16 µg/ml h) and MRT (2.07 ± 1.77 h), respectively (p<0.05). In mouse model, a single dose of ACV SLN was found to be equivalent to ACV administered as 400mg TID for 5 days in respect to lesion score and time of healing. CONCLUSION: The proof of concept of sustained-release acyclovir enabling administration as a single dose was thus demonstrated.

Development of a gastroretentive delivery system for acyclovir by 3D printing technology and its in vivo pharmacokinetic evaluation in Beagle dogs.

Gastroretentive (GR) systems are designed to prolong gastric residence time to allow sustained absorption and improve the oral bioavailability of drugs with a narrow absorption window in the upper part of the gastrointestinal tract. The present study aimed to develop a GR system for acyclovir using 3D printing technology and evaluate its in vivo pharmacokinetics after oral administration in Beagle dogs. The system consisted of a gastro-floating device, which can float in the gastric fluid, prepared by a fused deposition modeling 3D printer and conventional acyclovir sustained-release (SR) tablet. The acyclovir SR tablet was inserted to the floating device to allow sustained release of the drug in the stomach. The buoyancy and sustained-release property of the developed GR system were determined using an in vitro dissolution test, in vivo pharmacokinetic study, and abdominal X-ray imaging in Beagle dogs. The in vivo dissolution profiles of the GR system were also predicted based on the in vivo pharmacokinetic data using a population pharmacokinetic (POP-PK) model. In the dissolution test, the sustained-release characteristic of the GR system was identified with a time corresponding to 80% dissolution (T80) of 2.52 h. Following oral administration of the GR system, the time to reach the maximum concentration (Tmax) of acyclovir was significantly prolonged, whereas the maximum concentration (Cmax) decreased and the area under the curve increased compared with those obtained after the administration of immediate-release and SR tablets, indicating prolonged absorption. By X-ray imaging, we showed that the developed GR system stayed in the stomach for more than 12 h. The POP-PK model successfully described the observed plasma concentration-time data and predicted the in vivo biphasic dissolution profiles of the GR system, which was significantly different from the in vitro dissolution. The developed GR system could be applied to various drugs and had great prospects in the design and development of novel controlled-release formulations.