Enterovirga aerilata sp. nov. and Knoellia koreensis sp. nov., isolated from an automobile air conditioning system.

Two strictly aerobic and rod-shaped bacteria, labelled as DB1703T and DB2414ST, were obtained from an automobile air conditioning system. Strain DB1703T was Gram-stain-negative, while strain DB2414ST was Gram-stain-positive. Both strains were catalase-positive and oxidase-negative. Strains DB1703T and DB2414ST were able to grow at 18-42 °C. Strain DB1703T grew within a NaCl range of 0-3 % and a pH range of 6.0-8.0; while strain DB2414ST grew at 0-1 % and pH 6.5-8.5. The phylogenetic and 16S rRNA gene sequence analysis indicated that strains DB1703T and DB2414ST belonged to the genera Enterovirga and Knoellia, respectively. Strain DB1703T showed the closest phylogenetic similarity to Enterovirga rhinocerotis YIM 100770T (94.8 %), whereas strain DB2414ST was most closely related to Knoellia remsis ATCC BAA-1496T (97.7 %). The genome sizes of strains DB1703T and DB2414ST were 4 652 148 and 4 282 418 bp, respectively, with DNA G+C contents of 68.8 and 70.5 mol%, respectively. Chemotaxonomic data showed Q-10 as the sole ubiquinone in DB1703T and ML-8 (H4) in DB2414ST. The predominant cellular fatty acid in DB1703T was summed feature 8 (C18 : 1 ω7c and/or C18 : 1 ω6c), whereas iso-C16 : 0, C17 : 1 ω8c, and iso-C15 : 0 were dominant in DB2414ST. Overall, the polyphasic taxonomic comparisons showed that strains DB1703T and DB2414ST were distinct from their closest taxa and represent novel species within the genera Enterovirga and Knoellia, respectively. Accordingly, we propose the names Enterovirga aerilata sp. nov., with the type strain DB1703T (=KCTC 72724T=NBRC 114759T), and Knoellia koreensis sp. nov., with the type strain DB2414ST (=KCTC 49355T=NBRC 114620T).

Effects of decongestion on nasal cavity air conditioning efficiency: a CFD cohort study.

Decongestion reduces blood flow in the nasal turbinates, enlarging the airway lumen. Although the enlarged airspace reduces the trans-nasal inspiratory pressure drop, symptoms of nasal obstruction may relate to nasal cavity air-conditioning. Thus, it is necessary to quantify the efficiency of nasal cavity conditioning of the inhaled air. This study quantifies both overall and regional nasal air-conditioning in a cohort of 10 healthy subjects using computational fluid dynamics simulations before and after nasal decongestion. The 3D virtual geometry model was segmented from magnetic resonance images (MRI). Each subject was under two MRI acquisitions before and after the decongestion condition. The effects of decongestion on nasal cavity air conditioning efficiency were modelled at two inspiratory flowrates: 15 and 30 L min-1 to represent restful and light exercise conditions. Results show inhaled air was both heated and humidified up to 90% of alveolar conditions at the posterior septum. The air-conditioning efficiency of the nasal cavity remained nearly constant between nostril and posterior septum but dropped significantly after posterior septum. In summary, nasal cavity decongestion not only reduces inhaled air added heat by 23% and added moisture content by 19%, but also reduces the air-conditioning efficiency by 35% on average.

The air conditioning in the nose of mammals depends on their mass and on their maximal running speed.

The nose of the mammals is responsible for filtering, humidifying, and heating the air before entering the lower respiratory tract. This conditioning avoids, notably, dehydration of the bronchial and alveolar mucosa. However, since this conditioning is not perfect, exercising in cold air can induce lung inflammation, both for human and non-human mammals. This work aims to compare the air conditioning in the noses of various mammals during inspiration. We build our study on computational fluid dynamics simulations of the heat exchanges in the lumen of the upper respiratory tract of these mammals. These simulations show that the efficiency of the air conditioning in the nose during inspiration does not relate only to the mass m of the mammal but also to its maximal running speed v. More precisely, the results allow establishing a scaling law relating the efficiency of air conditioning in the nose of mammals to the ratio v / log 10 ( m ) . The simulations also correlate the resistance to the flow in the nose to the efficiency of this air conditioning. The obtained scaling law allows predicting the air temperature at the top of the trachea during inspiration for nasal-breathing mammals, and thus notably for humans of various ages.

Optimization of air quality and energy consumption in the cabin of electric vehicles using system simulation.

In electric vehicles, the Heating, Ventilation and Air-Conditioning (HVAC) function is often performed by a heat pump. Heating and cooling the cabin air drains energy directly from the vehicle's battery. In addition, these vehicles may operate in environments with high level of air pollution. In the cabin, passengers are confined to a small space where particles and harmful gases can accumulate. In addition, the ventilation system must also handle the air which does not enter the cabin through blower operation. This "infiltration" is a function of the vehicle speed and allows pollution to enter the cabin without being filtered or thermally treated. The objective of the study is to optimize the competing goals of the HVAC system: achieving the best air quality while maintaining good thermal comfort, at minimum energy costs. A system simulation tool is calibrated to represent the heating and cooling of an electric car. With this model, the influence of key factors is evaluated. Depending on ambient conditions and other parameters (number of occupants, vehicle speed, etc.), the blower flow rate and recirculation ratio can be adjusted to reach the objectives. The management of the proportion of fresh and recirculated air allows to regulate the humidity and carbon dioxide levels. Optimum controls are proposed as good trade-offs to reduce the power consumption, while maintaining a safe and comfortable environment for occupants. Compared to the full fresh air mode, the driving range gains are estimated in cold (-15 °C) and hot (30 °C) scenarios at 9 and 26 km respectively.

Reducing heat exposure from personal cooling strategies to green city construction in China's tropical city.

With rapid industrialization and urbanization, the risk of summer heat exposure for urban dwellers has increased. The use of air conditioners (ACs) has become the most common personal cooling strategy, but further increasing fossil fuel consumption. As sustainable and affordable cooling strategies, urban parks can reduce heat exposure and substitute a part of air conditioners use. This study evaluates the heat exposure reduction from personal cooling to urban parks based on satellite images, questionnaire surveys, and network analysis in Liuzhou, one tropical city in China. We found that residents with lower income had a higher risk of heat exposure. Among the respondents, 85 % of residents chose to use ACs to alleviate high temperatures in summer, and 81.8 % among them were willing to access park cooling area (PCA) to cool off instead of using ACs. About one third parks could serve as potential alternatives (with temperatures <28 °C) to air conditioning, reducing carbon emissions by 175.93 tons per day during the hot summer and offsetting 2.5 % of urban fossil fuel carbon emissions. The design of parks should give more consideration to elder people and provide a good cooling platform for various social income groups. Future planning should also focus on accessibility to enable residents to fully utilize the parks. Building parks within 34.10 ha would provide a more efficient use of land. This research guides sustainable, high-quality growth in industrial cities and might contribute to promotion of low-carbon cities and social equity.

Resilient performance in building maintenance: A macro-cognition perspective during sudden breakdowns.

Building maintenance encompasses multiple tightly inter-connected agents (e.g., technicians, occupants, supervisors, and equipment). Variable working conditions and limited resources may affect the safety and sustainability of the activities. Although recent studies have explored how complex systems can perform resilient behavior in facing the complexity of everyday activities, the factors that effectively contribute to resilient performance are still paired with limited empirical evidence. We studied the performance of the maintenance team during sudden breakdowns of air-conditioning devices in a large university campus, using the Functional Resonance Analysis Method (FRAM). A FRAM diagram containing 30 functions was organized including six macro-cognitive functions (expertise, sensemaking, communication, coordination, collaboration, and adaptation/improvisation), examining their role in anticipating, and responding to emergencies, and eight functional units that are directly impacted by disturbances were analyzed in more detail. Results indicate that macro-cognitive functions can greatly impact the functionality of the maintenance team in pursuit of their goals. Moreover, we noted those macro-cognitive functions here analyzed depend on each other to produce resilient performance.

Up in the air: Presence and collection of DNA from air and air conditioner units.

Biological material is routinely collected at crime scenes and from exhibits and is a key type of evidence during criminal investigations. Touch or trace DNA samples from surfaces and objects deemed to have been contacted are frequently collected. However, a person of interest may not leave any traces on contacted surfaces, for example, if wearing gloves. A novel means of sampling human DNA from air offers additional avenues for DNA collection. In the present study, we report on the results of a pilot study into the prevalence and persistence of human DNA in the air. The first aspect of the pilot study investigates air conditioner units that circulate air around a room, by sampling units located in four offices and four houses at different time frames post-cleaning. The second aspect investigates the ability to collect human DNA from the air in rooms, with and without people, for different periods of time and with different types of collection filters. Results of this pilot study show that human DNA can be collected on air conditioner unit surfaces and from the air, with air samples representing the more recent occupation while air conditioner units showing historic use of the room.

What is the effect of reducing the air change rate on the ventilation effectiveness in ultra-clean operating rooms?

BACKGROUND: The operating room (OR) department is one of the most energy-intensive departments of a hospital. The majority of ORs in the Netherlands have an air-handling installation with an ultra-clean ventilation system. However, not all surgeries require an ultra-clean OR. AIM: To determine the effect of reducing the air change rate on the ventilation effectiveness in ultra-clean ORs. METHODS: Lower air volume ventilation effectiveness (VELv) of conventional ventilation (CV), controlled dilution ventilation (cDV), temperature-controlled airflow (TcAF) and unidirectional airflow (UDAF) systems were evaluated within a 4 × 4 m measuring grid of 1 × 1 m. The VELv was defined as the recovery degree (RD), cleanliness recovery rate (CRR) and air change effectiveness (ACE). FINDINGS: The CV, cDVLv and TcAFLv ventilation systems showed a comparable mixing character in all areas (A, B and AB) when reducing the air change rate to 20/h. Ventilation effectiveness decreased when the air change rate was reduced, with the exception of the ACE. At all points for the UDAF-2Lv and at the centre point (C3) of the TcAFLv, higher RD10Lv and CRRLv were measured when compared with the other examined ventilation systems. CONCLUSIONS: The ventilation effectiveness decreased when an ultra-clean OR with an ultra-clean ventilation air-supply system was switched to an air change rate of 20/h. Reducing the air change rate in the OR from an ultra-clean OR to a generic OR will reduce the recovery degree (RD10) by a factor of 10-100 and the local air change rate (CRR) by between 42% and 81%.

Performance investigation of solar energy-aided compression-based building air conditioning strategies for variable climatic regions.

Decoupling cooling and ventilation tasks with an existing air conditioning methodology are a promising performance-enhancement technology. In this direction, different configurations of a desiccant-integrated independent ventilation element attached to a conventional cooling system are proposed in this study. This work establishes a quantitative comparative performance analysis among the different process air cooling (obtained through desiccant dehumidification) techniques for three different climates, namely, hot-dry, tropical, and Mediterranean. EnergyPlus simulations have been executed on a small-scale office building of 400-m2 area. The building constructional details and other required simulation input parameters follow benchmark standards. As the chemical dehumidification increases, the process air, i.e., supply air temperature that cannot be sent directly to the room, needs to be cooled. Three approaches for process air cooling have been considered: direct expansion (DX) cooling coil, indirect evaporative cooling (IEC), and sensible heat recovery wheel (SHRW). A solar collector assembly with a supporting heating arrangement is coupled with desiccant unit for regeneration. Outdoor air is used for regeneration in the case of the DX cooling coil and IEC, whereas return air is used in the heat recovery wheel case. Annual simulation results reveal that the SHRW-aided case performs superior than DX coil case for the pertinent climatic conditions, with 9.6 to 45.01% of annual energy savings. For the IEC, energy consumption was 1.8 to 18.38% less than that of DX coil. Also, using return air in this best-suited case reduces the net thermal energy requirement for regeneration by 14.63 to 71.65% with respect to DX coil.

Zonal demand-controlled ventilation strategy to minimize infection probability and energy consumption: A coordinated control based on occupant detection.

Due to the outbreak of COVID-19, an increased risk of airborne transmission has been experienced in buildings, particularly in confined public places. The need for ventilation as a means of infection prevention has become more pronounced given that some basic precautions (like wearing masks) are no longer mandatory. However, ventilating the space as a whole (e.g., using a unified ventilation rate) may lead to situations where there is either insufficient or excessive ventilation in localized areas, potentially resulting in localized virus accumulation or large energy consumption. It is of urgent need to investigate real-time control of ventilation systems based on local demands of the occupants to strike a balance between infection risk and energy saving. In this work, a zonal demand-controlled ventilation (ZDCV) strategy was proposed to optimize the ventilation rates in sub-zones. A camera-based occupant detection method was developed to detect occupants (with eight possible locations in sub-zones denoted as 'A' to 'H'). Linear ventilation model (LVM), dimension reduction, and artificial neural network (ANN) were integrated for rapid prediction of pollutant concentrations in sub-zones with the identified occupants and ventilation rates as inputs. Coordinated ventilation effects between sub-zones were optimized to improve infection prevention and energy savings. Results showed that rapid prediction models achieved an average prediction error of 6 ppm for CO2 concentration fields compared with the simulation under different occupant scenarios (i.e., occupant locations at ABH, ABCFH, and ABCDEFH). ZDCV largely reduced the infection risk to 2.8% while improved energy-saving efficiency by 34% compared with the system using constant ventilation rate. This work can contribute to the development of building environmental control systems in terms of pollutant removal, infection prevention, and energy sustainability.

Study on infection risk in a negative pressure ward under different fresh airflow patterns based on a radiation air conditioning system.

COVID-19 and other respiratory infectious viruses are highly contagious, and patients need to be treated in negative pressure wards. At present, many negative pressure wards use independent air conditioning equipment, but independent air conditioning equipment has problems such as indoor air circulation flow, condensate water accumulation, and improper filter maintenance, which increase the risk of infection for healthcare workers and patients. The radiation air conditioning system relies on the radiation ceiling to control the indoor temperature and uses new air to control the indoor humidity and air quality. The problems caused by the use of independent air conditioning equipment should be avoided. This paper studies the thermal comfort, contaminant distribution characteristics, contaminant removal efficiency, and accessibility of supply air in a negative pressure ward with a radiation air conditioning system under three airflow patterns. In addition, the negative pressure ward was divided into 12 areas, and the infection probability of healthcare workers in different areas was analyzed. The results show that the application of radiation air conditioning systems in negative pressure wards can ensure the thermal comfort of patients. Stratum ventilation and ceiling-attached jets have similar effects in protecting healthcare workers; both can effectively reduce the contaminant concentrations and the risk of infection of healthcare workers. Ceiling-attached jets decreases the contaminant concentrations by 10.73%, increases the contaminant removal efficiency by 12.50%, and decreases the infection probability of healthcare workers staying indoors for 10 min by 23.18%, compared with downward ventilation.

Thermal sensation prediction model for high-speed train occupants based on skin temperatures and skin wettedness.

Passenger thermal comfort in high-speed train (HST) carriages presents unique challenges due to factors such as extensive operational areas, longer travel durations, larger spaces, and higher passenger capacities. This study aims to propose a new prediction model to better understand and address thermal comfort in HST carriages. The proposed prediction model incorporates skin wettedness, vertical skin temperature difference (ΔTd), and skin temperature as parameters to predict the thermal sensation vote (TSV) of HST passengers. The experiments were conducted with 65 subjects, evenly distributed throughout the HST compartment. Thermal environmental conditions and physiological signals were measured to capture the subjects' thermal responses. The study also investigated regional and overall thermal sensations experienced by the subjects. Results revealed significant regional differences in skin temperature between upper and lower body parts. By analyzing data from 45 subjects, We analyzed the effect of 25 variables on TSV by partial least squares (PLS), from which we singled out 3 key factors. And the optimal multiple regression equation was derived to predict the TSV of HST occupants. Validation with an additional 20 subjects demonstrated a strong linear correlation (0.965) between the actual TSV and the predicted values, confirming the feasibility and accuracy of the developed prediction model. By integrating skin wettedness and ΔTd with skin temperature, the model provides a comprehensive approach to predicting thermal comfort in HST environments. This research contributes to advancing thermal comfort analysis in HST and offers valuable insights for optimizing HST system design and operation to meet passengers' comfort requirements.

Reduction of airborne and surface-borne bacteria in a medical center burn intensive care unit using active, upper-room, germicidal ultraviolet (GUV) disinfection.

OBJECTIVE: To determine the effectiveness of active, upper-room, germicidal ultraviolet (GUV) devices in reducing bacterial contamination in patient rooms in air and on surfaces as a supplement to the central heating, ventilation, and air conditioning (HVAC) air handling unit (AHU) with MERV 14 filters and UV-C disinfection. METHODS: This study was conducted in an academic medical center, burn intensive care unit (BICU), for 4 months in 2022. Room occupancy was monitored and recorded. In total, 402 preinstallation and postinstallation bacterial air and non-high-touch surface samples were obtained from 10 BICU patient rooms. Airborne particle counts were measured in the rooms, and bacterial air samples were obtained from the patient-room supply air vents and outdoor air, before and after the intervention. After preintervention samples were obtained, an active, upper-room, GUV air disinfection system was deployed in each of the patient rooms in the BICU. RESULTS: The average levels of airborne bacteria of 395 CFU/m3 before GUV device installation and 37 CFU/m3 after installation indicated an 89% overall decrease (P < .0001). Levels of surface-borne bacteria were associated with a 69% decrease (P < .0001) after GUV device installation. Outdoor levels of airborne bacteria averaged 341 CFU/m3 in March before installation and 676 CFU/m3 in June after installation, but this increase was not significant (P = .517). CONCLUSIONS: Significant reductions in air and surface contamination occurred in all rooms and areas and were not associated with variations in outdoor air concentrations of bacteria. The significant decrease of surface bacteria is an unexpected benefit associated with in-room GUV air disinfection, which can potentially reduce overall bioburden.

Magnetic cortical oscillations associated with subjective auditory coolness during paired comparison of time-varying HVAC sounds.

The impressions of heating, ventilation, and air conditioning (HVAC) sounds are important for the comfort people experience in their living spaces. Revealing neural substrates of the impressions induced by HVAC sounds can help to develop neurophysiological indices of the comfort of HVAC sounds. There have been numerous studies on the brain activities associated with the pleasantness of sounds, but few on the brain activities associated with the thermal impressions of HVAC sounds. Seven time-varying HVAC sounds were synthesized as stimuli using amplitude modulation. Six participants took part in subjective evaluation tests and MEG measurements. Subjective coolness of the HVAC sounds was measured using the paired comparison method. Magnetoencephalographic (MEG) measurements were carried out while participants listened to and compared the time-varying HVAC sounds. Time-frequency analysis and cluster-based analysis were performed on the MEG data. The subjective evaluation tests showed that the subjective coolness of the amplitude-modulated HVAC sounds was affected by the modulation frequency, and that there was individual difference in subjective coolness. A cluster-based analysis of the MEG data revealed that the brain activities of two participants significantly differed when they listened to cooler or less cool HVAC sounds. The frontal low-theta (4-5 Hz) and the temporal alpha (8-13 Hz) activities were observed. The frontal low-theta and the temporal alpha activities may be associated with the coolness of HVAC sound. This result suggests that the comfort level of HVAC sound can be evaluated and individually designed using neurophysiological measurements.

Clinical Issues - January 2024.

Off-label medication use and prescribing practices Key words: off-label, licensed prescriber, approved, unapproved, US Food and Drug Administration (FDA). Prophylactic, therapeutic, and empiric use of antimicrobial agents Key words: prophylactic, therapeutic, empiric, infection, antimicrobial. Perioperative RN administration of antineoplastic agents Key words: antineoplastic medication, chemotherapy, hyperthermic intraperitoneal chemotherapy (HIPEC), instillation device, perfusionist. Minimum efficiency reporting values, parameters, and testing for air filters in heating, ventilation, and air-conditioning systems Key words: heating, ventilation, and air-conditioning (HVAC); minimum efficiency reporting value (MERV); particle size removal efficiency; air filter; filtration.

Guidelines in Practice: Design and Maintenance of the Surgical Suite.

Hospital construction and renovation is an ongoing occurrence in the health care setting. The recently updated AORN "Guideline for design and maintenance of the surgical suite" provides perioperative nurses with information on the layout design and maintenance of perioperative spaces; safety measures to use during construction and renovation; monitoring and maintenance of the heating, ventilation, and air conditioning; and how to respond to unintended utility failures. This article provides an overview of the guideline and discusses recommendations for the interdisciplinary team, planning and designing the surgical suite, construction-related environmental contamination, ORs, and OR maintenance. It also includes a scenario describing specific concerns associated with the construction of an additional OR. Perioperative nurses should review the guideline in its entirety and apply the recommendations when participating in perioperative construction and renovation projects.

Comparing and validating air sampling methods for SARS-CoV-2 detection in HVAC ducts of student dorms.

The Coronavirus disease 2019 (COVID-19) pandemic demonstrated the threat of airborne pathogenic respiratory viruses such as the airborne Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2). The ability to detect circulating viruses in a workplace or dormitory setting allows an early warning system that can alert occupants to implement precautions (e.g. masking) and/or trigger individual testing to allow isolation and quarantine measures to halt contagion. This work extends and validates the first successful detection of SARS-CoV-2 virus in dormitory Heating, Ventilation, and Air Conditioning (HVAC) systems and compares different air sampling methods and media types combined with optimized quantitative Reverse-Transcription PCR (qRT-PCR) analysis. The study was performed in two environments; large dormitories of students who underwent periodic testing for COVID-19 (unknown environment) and the HVAC air from a suite with a student who had tested positive for COVID-19 (known dorm). The air sampling methods were performed using Filter Cassettes, BioSampler, AerosolSense Sampler and Button Sampler (with four media types with different pore sizes of 5 µm, 3 µm, 3 µm (gelatin), and 1.2 µm). The SARS-CoV-2 positive air samples were compared with the positive samples collected by individual student campus track tracing methods using PCR testing on saliva and nasopharyngeal samples. The results show a detection rate of 73% in the unknown environment and a 78% detection rate in the known dorm. Our data show that the virus was detectable with all the sampling methods we employed. However, the AerosolSense sampler and BioSampler performed the best at 63% and 61% detection rates, compared to 25% for the Filter Cassettes and 23% for the Button Sampler. Despite the success rate, it is not possible to definitively conclude which method is most sensitive due to the limited number of samples. These results show that with careful sampling and optimized PCR methods, pathogenic respiratory viruses can be detected in large buildings using HVAC return air.

Net impact of air conditioning on heat-related mortality in Japanese cities.

BACKGROUND: Air conditioning (AC) presents a viable means of tackling the ill-effects of heat on human health. However, AC releases additional anthropogenic heat outdoors, and this could be detrimental to human health, especially in urban communities. This study determined the excess heat-related mortality attributable to anthropogenic heat from AC use under various projected global warming scenarios in seven Japanese cities. The overall protection from AC use was also measured. METHODS: Daily average 2-meter temperatures in the hottest month of August from 2000 to 2010 were modeled using the Weather Research and Forecasting (WRF) model with BEP+BEM (building effect parameterization and building energy model). Risk functions for heat-mortality associations were generated with and without AC use from a two-stage time series analysis. We coupled simulated August temperatures and heat-mortality risk functions to estimate averted deaths and unavoidable deaths from AC use. RESULTS: Anthropogenic heat from AC use slightly augmented the daily urban temperatures by 0.046 °C in Augusts of 2000-2010 and up to 0.181 °C in a future with 3 °C urban warming. This temperature rise was attributable to 3.1-3.5 % of heat-related deaths in Augusts of 2000-2010 under various urban warming scenarios. About 36-47 % of heat-related deaths could be averted by air conditioning use under various urban warming scenarios. DISCUSSION: AC has a valuable protective effect from heat despite some unavoidable mortality from anthropogenic heat release. Overall, the use of AC as a major adaptive strategy requires careful consideration.

Analysis of the coupled flows of aluminum and copper in household air conditioning system.

The global "copper-poor and aluminum-rich" situation has made the possibility of "copper saving with aluminum" an important topic. This study established a framework for analyzing multiple substances' coupled flows at the product level based on material flow analysis (MFA), and took the household air conditioning system of the Chinese mainland in 2020 as an example to characterize the coupled flows of aluminum and copper. The results showed that the system consumed 0.69 million tons of aluminum and 2.10 million tons of copper, and discharged 0.17 million tons of aluminum and 0.43 million tons of copper to the environment cumulatively to achieve 13.2 million terajoules of final heat exchanged and serve 1.24 billion square meters during lifetime in mainland China alone, secondary aluminum and copper accounted for only 22.61% and 24.83% of the total consumption, and the in-use stocks increased by 0.19 million tons of aluminum and 0.70 million tons of copper. The external dependency of copper ore was 92.83%, which was significantly higher than the 44.29% of bauxite. The comprehensive utilization efficiency of copper reached 77.88%, which was slightly higher than the 70.80% of aluminum. The conclusion indicates that under the premise of meeting use requirements, promoting "replacing copper with aluminum" can improve the stability and safety of China's material supply chain, but there is a need to further boost the production efficiency of aluminum in primary production.

Filters of automobile air conditioning systems as in-car source of exposure to infections and toxic moulds.

The main component of an air conditioning system is air filters. Over time, the filters of an air conditioning system in cars can turn into sources of emission of microbiological hazards. The aim of this study was to quantitatively and qualitatively assess the presence of infectious and toxic fungi in the AC filters in passenger cars. The studied non-woven filters were removed from passenger cars during the "winter"/"summer" seasons. The taxonomic identification of the fungi isolated from the filters was performed using both the culture-based and molecular methods. RT-PCR was applied to assess the presence of gene fragments regulating aflatoxin biosynthesis in the isolates obtained from fungal cultures. The average fungal concentrations in the filter samples collected during the summer/winter season were 5.4 × 104 cfu/m2 and 2.4 × 104 cfu/m2, respectively. Most of the filter samples, collected in both the studied seasons, revealed the presence of Aspergillus species including A. fumigatus, A. niger, A. terreus and/or A. flavus. The recorded levels of fungal contamination of AC filters in passenger cars indicate the necessity for more frequent filter replacement in this type of vehicle. Occupational exposure to moulds and the resulting health problems that may be experienced by professional drivers should be properly recognised in order to undertake effective preventive measures.