Effect of zeolites on the reduction of the ecotoxicity of carbamazepine in the environment.

In this study, the impact of calcination of zeolites on the ecotoxicity of carbamazepine solutions in two matrices, water and synthetic sewage, was assessed. Two types of zeolites were tested: natural zeolite, in the form of a zeolite rock consisting mainly of clinoptilolite, and a synthetic zeolite type 5 A. Additionally, zeolites were calcined at a temperature of 200 °C. The kinetics of carbamazepine adsorption in aqueous solutions and in synthetic sewage matrix was determined. Higher adsorption capacity was obtained for carbamazepine aqueous solutions as well as zeolites after the calcination process. Considering type of zeolite, the highest and fastest uptake of carbamazepine was observed for natural zeolite after calcination. In the case of ecotoxicity, carbamazepine solutions before adsorption was the most toxic towards Raphidocelis subcapitata, next Aliivibrio fischeri and Daphnia magna, regardless to the matrix type. The differentiation in toxicity regarding the type of matrix was observed, in the case of algae and bacteria, higher toxicity was demonstrated by carbamazepine solutions in the water matrix, while in the case of crustaceans-the sewage matrix. After the adsorption process, the toxicity of carbamazepine solutions on zeolites decreased by 34.5-60.9 % for R. subcapitata, 33-39 % for A. fischeri and 55-60 % for D. magna, thus confirming the effectiveness of the proposed method of carbamazepine immobilization.

Physicochemical and ecotoxicological approaches for Moknine Continental Sebkha in Tunisia.

Degradation of water quality is an emerging issue in many developing countries. In this context, industrial and domestic effluents heavily contaminate the coast of Moknine Continental Sebkha in Tunisia. The present study aimed to biomonitor the seawater quality of the Moknine Continental Sebkha coast using physicochemical and ecotoxicological approaches. The ecotoxicological assessment was performed using three species representing different trophic levels, namely Vibrio fischeri, Selenastrum capricornutum, and Lepidium sativum. In the physicochemical analysis such as BOD (biochemical oxygen demand), COD (chemical oxygen demand), TSS (total suspended solids), TOC (total organic carbon), NO3- (nitrate), AOX (adsorbable organic halogen), the recorded levels of pH and total suspended solids did not comply with the Tunisian standard (NT.09.11/1983). The ecotoxicological data confirmed that the tested water samples displayed toxicity to two test indicators L. sativum and S. capricornutum. A targeted chemical screening of the Moknine Continental Sebkha coast previously performed revealed the presence of total mercury, four phthalate acid esters, and one non-phthalate plasticizer, a fact that could explain the observed ecotoxicological effects and therefore might harm the biotic area and the health of the surrounding population.

Emerging pollutants in textile wastewater: an ecotoxicological assessment focusing on surfactants.

Water and several chemicals, including dyestuffs, surfactants, acids, and salts, are required during textile dyeing processes. Surfactants are harmful to the aquatic environment and induce several negative biological effects in exposed biota. In this context, the present study aimed to assess acute effects of five surfactants, comprising anionic and nonionic classes, and other auxiliary products used in fiber dyeing processes to aquatic organisms Vibrio fischeri (bacteria) and Daphnia similis (cladocerans). The toxicities of binary surfactant mixtures containing the anionic surfactant dodecylbenzene sulfonate + nonionic fatty alcohol ethoxylate and dodecylbenzene sulfonate + nonionic alkylene oxide were also evaluated. Nonionic surfactants were more toxic than anionic compounds for both organisms. Acute nonionic toxicity ranged from 1.3 mg/L (fatty alcohol ethoxylate surfactant) to 2.6 mg/L (ethoxylate surfactant) for V. fischeri and from 1.9 mg/L (alkylene oxide surfactant) to 12.5 mg/L (alkyl aryl ethoxylated and aromatic sulfonate surfactant) for D. similis, while the anionic dodecylbenzene sulfonate EC50s were determined as 66.2 mg/L and 19.7 mg/L, respectively. Both mixtures were very toxic for the exposed organisms: the EC50 average in the anionic + fatty alcohol ethoxylate mixture was of 1.0 mg/L ± 0.11 for V. fischeri and 4.09 mg/L ± 0.69 for D. similis. While the anionic + alkylene oxide mixture, EC50 of 3.34 mg/L for D. similis and 3.60 mg/L for V. fischeri. These toxicity data suggested that the concentration addition was the best model to explain the action that is more likely to occur for mixture for the dodecylbenzene sulfonate and alkylene oxide mixtures in both organisms. Our findings also suggest that textile wastewater surfactants may interact and produce different responses in aquatic organisms, such as synergism and antagonism. Ecotoxicological assays provide relevant information concerning hazardous pollutants, which may then be adequately treated and suitably managed to reduce toxic loads, associated to suitable management plans.

Ecotoxicological assessment of biomass-derived furan platform chemicals using aquatic and terrestrial bioassays.

An environmental toxicological assessment of fourteen furanic compounds serving as valuable building blocks produced from biomass was performed. The molecules selected included well studied compounds serving as control examples to compare the toxicity exerted against a variety of highly novel furans which have been additionally targeted as potential or current alternatives to biofuels, building blocks and polymer monomers. The impact of the furan platform chemicals targeted on widely applied ecotoxicity model organisms was determined employing the marine bioluminescent bacterium Aliivibrio fischeri and the freshwater green microalgae Raphidocelis subcapitata, while their ecotoxicity effects on plants were assessed using dicotyledonous plants Sinapis alba and Lepidium sativum. Regarding the specific endpoints evaluated, the furans tested were slightly toxic or practically nontoxic for A. fischeri following 5 and 15 min of exposure. Moreover, most of the building blocks did not affect the growth of L. sativum and S. alba at 150 mg L-1 for 72 h of exposure. Specifically, 9 and 11 out of the 14 furan platform chemicals tested were non-effective or stimulant for L. sativum and S. alba respectively. Given that furans comprise common inhibitors in biorefinery fermentations, the growth inhibition of the specific building blocks was studied using the industrial workhorse yeast Saccharomyces cerevisiae, demonstrating insignificant inhibition on eukaryotic cell growth following 6, 12 and 16 h of exposure at a concentration of 500 mg L-1. The study provides baseline information to unravel the ecotoxic effects and to confirm the green aspects of a range of versatile biobased platform molecules.

Bioactive Properties of a Novel Antibacterial Dye Obtained from Laccase-Mediated Oxidation of 8-Anilino-1-naphthalenesulfonic Acid.

Fungal laccase obtained from a Cerrena unicolor strain was used as an effective biocatalyst for the transformation of 8-anilino-1-naphthalenesulfonic acid into a green-coloured antibacterial compound, which can be considered as both an antimicrobial agent and a textile dye, simultaneously. The process of biosynthesis was performed in buffered solutions containing methanol as a co-solvent, allowing better solubilisation of substrate. The transformation process was optimised in terms of the buffer pH value, laccase activity, and concentrations of the substrate and co-solvent. The crude product obtained exhibited low cytotoxicity, antibacterial properties against Staphylococcus aureus and Staphylococcus epidermidis, and antioxidant properties. Moreover, the synthesised green-coloured compound proved non-allergenic and demonstrated a high efficiency of dyeing wool fibres.

Dose-effect and structure-activity relationships of haloquinoline toxicity towards Vibrio fischeri.

Many quinoline (QL) derivatives are present in the environment and pose potential threats to human health and ecological safety. The acute toxicity of 30 haloquinolines (HQs) was examined using the photobacterium Vibrio fischeri. IC50 values (inhibitory concentration for 50% luminescence elimination) were in the range 5.52 to >200 mg·L-1. The derivative 5-BrQL exhibited the highest toxicity, with 3-ClQL, 3-BrQL, 4-BrQL, 5-BrQL, 6-BrQL, and 6-IQL all having IC50 values below 10 mg·L-1. Comparative molecular field analysis modeling based on the steric and electrostatic field properties of the HQs was used to quantify the impact of halogen substituents on their toxicity. QL derivative rings with larger substituents at the 2/8-positions and less negative charge at the 4/5/6/8-positions were positively correlated with acute toxicity towards V. fischeri.

The Removal of Binary Mixture of Dyes by Heterogeneous Fenton Oxidation: Kinetics, Product Identification and Toxicity Assessment.

The removal of mixture of two azo dyes, Acid blue 29 and Ponceau xylidine, was studied by heterogeneous Fenton and Fenton-type processes using hydrogen peroxide and sodium persulphate as oxidants in the presence of and nano and micro- particles as catalysts. The synthesised nano- particles were characterised using analytical techniques viz. FT-IR, TEM, EDX, powder XRD and VSM. We have examined the effects of particle size on the COD removal efficiency and the reusability of the catalyst after optimising pH, and concentrations of catalyst and oxidant. Combination of nano-  and hydrogen peroxide possessed higher COD removal efficiency, which was accelerated in acidic pH and inhibited at pH > 6. Total consumption of hydrogen peroxide confirmed the efficiency of the optimised parameters. The mechanism of the formation of intermediate ions and products are proposed. COD removal and consumption of hydrogen peroxide follow pseudo-first-order kinetics. The toxicity of the solutions was assessed using Aliivibrio fischeri light loss and Escherichia coli growth inhibition assays. Both the assays showed different toxicity levels for the same solution.

Stereoselective separation of sulfoxaflor by electrokinetic chromatography and applications to stability and ecotoxicological studies.

An Electrokinetic Chromatography method was developed for the stereoselective analysis of sulfoxaflor, a novel sulfoximine agrochemical with two chiral centers. A screening with fourteen negatively charged CDs was performed and Succinyl-ß-CD (Succ-ß-CD) was selected. A 15 mM concentration of this CD in a 100 mM borate buffer (pH 9.0), using an applied voltage of 20 kV and a temperature of 15 °C made possible the baseline separation of the four stereoisomers of sulfoxaflor in 13.8 min. The evaluation of the linearity, accuracy, precision, LODs and LOQs of the method developed showed its performance to be applied to the analysis of commercial agrochemical formulations, the evaluation of the stability of sulfoxaflor stereoisomers under biotic and abiotic conditions, and to predict, for the first time, sulfoxaflor toxicity (using real concentrations instead of nominal concentrations), on two non-target aquatic organisms, the freshwater plant, Spirodela polyrhiza, and the marine bacterium, Vibrio fischeri.

UV-C Peroxymonosulfate Activation for Wastewater Regeneration: Simultaneous Inactivation of Pathogens and Degradation of Contaminants of Emerging Concern.

This study explores the capability of Sulfate Radical-based Advanced Oxidation Processes (SR-AOPs) for the simultaneous disinfection and decontamination of urban wastewater. Sulfate and hydroxyl radicals in solution were generated activating peroxymonosulfate (PMS) under UV-C irradiation at pilot plant scale. The efficiency of the process was assessed toward the removal of three CECs (Trimethoprim (TMP), Sulfamethoxazole (SMX), and Diclofenac (DCF)) and three bacteria (Escherichia coli, Enterococcus spp., and Pseudomonas spp.) in actual urban wastewater (UWW), obtaining the optimal value of PMS at 0.5 mmol/L. Under such experimental conditions, bacterial concentration ≤ 10 CFU/100 mL was reached after 15 min of UV-C treatment (0.03 kJ/L of accumulative UV-C radiation) for natural occurring bacteria, no bacterial regrowth was observed after 24 and 48 h, and 80% removal of total CECs was achieved after 12 min (0.03 kJ/L), with a release of sulfate ions far from the limit established in wastewater discharge. Moreover, the inactivation of Ampicillin (AMP), Ciprofloxacin (CPX), and Trimethoprim (TMP) antibiotic-resistant bacteria (ARB) and reduction of target genes (ARGs) were successfully achieved. Finally, a harmful effect toward the receiving aquatic environment was not observed according to Aliivibrio fischeri toxicity tests, while a slightly toxic effect toward plant growth (phytotoxicity tests) was detected. As a conclusion, a cost analysis demonstrated that the process could be feasible and a promising alternative to successfully address wastewater reuse challenges.

Secondary Effects of Hypochlorite Treatment on the Emerging Pollutant Candesartan: The Formation of Degradation Byproducts and Their Toxicological Profiles.

In recent years, many studies have reported the frequent detection of antihypertensive agents such as sartans (olmesartan, valsartan, irbesartan and candesartan) in the influents and effluents of wastewater treatment plants (WWTPs) and in the superficial waters of rivers and lakes in both Europe and North America. In this paper, the degradation pathway for candesartan (CAN) was investigated by simulating the chlorination process that is normally used to reduce microbial contamination in a WWTP. Twelve isolated degradation byproducts (DPs), four of which were isolated for the first time, were separated on a C-18 column by employing a gradient HPLC method, and their structures were identified by combining nuclear magnetic resonance and mass spectrometry and comparing the results with commercial standards. On the basis of these results, a mechanism of formation starting from the parent drug is proposed. The ecotoxicity of CAN and its DPs was studied by conducting a battery of ecotoxicity tests; bioassays were performed using Aliivibrio fischeri (bacterium), Daphnia magna (planktonic crustacean) and Raphidocelis subcapitata (alga). The ecotoxicity results shed new light on the increased toxicity of DPs compared with the parent compound.

Effects of water produced by oil segment on aquatic organisms after treatment using advanced oxidative processes.

The water produced (PW) by the petroleum industry is a potential contaminant to aquatic biota, due to its complex mixture that may contain polycyclic aromatic hydrocarbons (PAHs), organic chemical compounds, including benzene, toluene, ethylbenzene and xylene (BTEX), metals and other components that are known to be toxic. The aim of this investigation was to examine the acute toxicity produced by a PW sample in aquatic organisms Vibrio fischeri and Daphnia similis prior to and after 4 treatments using advanced oxidative processes such as photocatalysis, photoelectrocatalysis, ozonation and photoelectrocatalytic ozonation. Data demonstrated that exposure to PW was toxic to both organisms, as evidenced by reduced luminescence in bacterium Vibrio fischeri and induced immobility in Daphnia similis. After treatment of PW with 4 different techniques, the PW remained toxic for both tested organisms. However, photoelectrocatalysis was more efficient in decreasing toxicity attributed to PW sample. Therefore, data demonstrate the importance of treating PW for later disposal in the environment in order to mitigate ecotoxicological impacts. Further photoelectrocatalysis appeared to be a promising tool for treating PW samples prior to disposal and exposure of aquatic ecosystems.

Toxicity investigation of CeO2 nanoparticles coated with glucose and exopolysaccharides levan and pullulan on the bacterium Vibrio fischeri and aquatic organisms Daphnia magna and Danio rerio.

Cerium oxide nanoparticles (nCeO2) have widespread applications, but they can be hazardous to the environment. Some reports indicate the toxic effect of nCeO2 on tested animals, but literature data are mainly contradictory. Coating of nCeO2 can improve their suspension stability and change their interaction with the environment, which can consequently decrease their toxic effects. Herein, the exopolysaccharides levan and pullulan, due to their high water solubility, biocompatibility, and ability to form film, were used to coat nCeO2. Additionally, the monosaccharide glucose was used, since it is a common material for nanoparticle coating. This is the first study investigating the impact of carbohydrate-coated nCeO2 in comparison to uncoated nCeO2 using different model organisms. The aim of this study was to test the acute toxicity of carbohydrate-coated nCeO2 on the bacterium Vibrio fischeri NRRL B-11177, the crustacean Daphnia magna, and zebrafish Danio rerio. The second aim was to investigate the effects of nCeO2 on respiration in Daphnia magna which was performed for the first time. Finally, it was important to see the relation between Ce bioaccumulation in Daphnia magna and Danio rerio and other investigated parameters. Our results revealed that the coating decreased the toxicity of nCeO2 on Vibrio fischeri. The coating of nCeO2 did not affect the nanoparticles' accumulation/adsorption or mortality in Daphnia magna or Danio rerio. Monitoring of respiration in Daphnia magna revealed changes in CO2 production after exposure to coated nCeO2, while the crustacean's O2 consumption was not affected by any of the coated nCeO2. In summary, this study revealed that, at 200 mg L-1, uncoated and carbohydrate-coated nCeO2 are not toxic for the tested organisms, however, the CO2 production in Daphnia magna is different when they are treated with coated and uncoated nCeO2. The highest production was in glucose and levan-coated nCeO2 according to their highest suspension stability. Daphnia magna (D. magna), Danio rerio (D. rerio), Vibrio fischeri (V. fischeri).

Detoxification of Ciprofloxacin in an Anaerobic Bioprocess Supplemented with Magnetic Carbon Nanotubes: Contribution of Adsorption and Biodegradation Mechanisms.

In anaerobic bioreactors, the electrons produced during the oxidation of organic matter can potentially be used for the biological reduction of pharmaceuticals in wastewaters. Common electron transfer limitations benefit from the acceleration of reactions through utilization of redox mediators (RM). This work explores the potential of carbon nanomaterials (CNM) as RM on the anaerobic removal of ciprofloxacin (CIP). Pristine and tailored carbon nanotubes (CNT) were first tested for chemical reduction of CIP, and pristine CNT was found as the best material, so it was further utilized in biological anaerobic assays with anaerobic granular sludge (GS). In addition, magnetic CNT were prepared and also tested in biological assays, as they are easier to be recovered and reused. In biological tests with CNM, approximately 99% CIP removal was achieved, and the reaction rates increased ≈1.5-fold relatively to the control without CNM. In these experiments, CIP adsorption onto GS and CNM was above 90%. Despite, after applying three successive cycles of CIP addition, the catalytic properties of magnetic CNT were maintained while adsorption decreased to 29 ± 3.2%, as the result of CNM overload by CIP. The results suggest the combined occurrence of different mechanisms for CIP removal: adsorption on GS and/or CNM, and biological reduction or oxidation, which can be accelerated by the presence of CNM. After biological treatment with CNM, toxicity towards Vibrio fischeri was evaluated, resulting in ≈ 46% detoxification of CIP solution, showing the advantages of combining biological treatment with CNM for CIP removal.

Prediction of the joint action of binary mixtures based on characteristic parameter k∙ECx from concentration-response curves.

The evaluation of joint toxicity of mixtures is an important topic in toxicology. Previous studies have found that the parameter k∙ECx of concentration response curves (CRCs) can be used to assess the applicability of concentration addition model (CA). This study further assesses the predictability of k∙ECx on the joint toxicity evaluation. The toxicities of the twelve environmental pollutants, as well as those of binary mixtures with an equivalent-effect concentration ratio, to Vibrio fischeri were determined by using the microplate toxicity analysis. The toxicity evaluation of mixtures was conducted by CA and independent action model (IA). The relationship between the joint toxicity (measured by the relative model deviation ratio (rMDR)) and the k∙ECx was studied. The results shows that the k∙ECx could reflect the shape of CRCs in the whole concentration range. According to the IA and CA, 65% of the mixtures produce strong antagonistic or synergistic effect due to the significant difference of k∙ECx. The percentage of the relative difference of k∙ECx of components and the rMDRx can be fitted by an exponential function. Different types of interactions could be described using this function. It is suggested that the joint toxicity of binary mixtures can be assessed with the parameter k∙ECx, which can quickly get very important data when planning experiments, but also reduce the number of experiments.

Enzymatic Activity and Its Relationship with Organic Matter Characterization and Ecotoxicity to Aliivibrio fischeri of Soil Samples Exposed to Tetrabutylphosphonium Bromide.

This study aimed to determine the impact of tetrabutylphosphonium bromide [TBP][Br] on the soil environment through an experiment on loamy sand samples. The tested salt was added to soil samples at doses of 0 (control), 1, 10, 100, and 1000 mg kg-1 dry matter (DM). During the experiment, the activity of selected enzymes involved in carbon, phosphorus, and nitrogen cycles, characteristics of organic matter with Fourier-transform infrared (FT-IR) spectroscopy, and toxicity of soil samples in relation to Aliivibrio fischeri were determined at weekly intervals. The results showed that low doses of [TBP][Br] (1 and 10 mg kg-1 DM) did not have much influence on the analyzed parameters. However, the addition of higher doses of the salt into the soil samples (100 and 1000 mg kg-1 DM) resulted in a decrease in the activity of enzymes participating in the carbon and phosphorus cycle and affected the activation of those enzymes involved in the nitrogen cycle. This may be due to changes in aerobic conditions and in the qualitative and quantitative composition of soil microorganisms. It was also observed that the hydrophobicity of soil organic matter was increased. Moreover, the findings suggested that the soil samples containing the highest dose of [TBP][Br] (1000 mg kg-1 DM) can be characterized as acute environmental hazard based on their toxicity to Aliivibrio fischeri bacteria. The increased hydrophobicity and ecotoxicity of the soil samples exposed to the tested salt were also positively correlated with the activity of dehydrogenases, proteases, and nitrate reductase. Observed changes may indicate a disturbance of the soil ecochemical state caused by the presence of [TBP][Br].

Toxicity of Zn-Fe Layered Double Hydroxide to Different Organisms in the Aquatic Environment.

The application of layered double hydroxide (LDH) nanomaterials as catalysts has attracted great interest due to their unique structural features. It also triggered the need to study their fate and behavior in the aquatic environment. In the present study, Zn-Fe nanolayered double hydroxides (Zn-Fe LDHs) were synthesized using a co-precipitation method and characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), and nitrogen adsorption-desorption analyses. The toxicity of the home-made Zn-Fe LDHs catalyst was examined by employing a variety of aquatic organisms from different trophic levels, namely the marine photobacterium Vibrio fischeri, the freshwater microalga Pseudokirchneriella subcapitata, the freshwater crustacean Daphnia magna, and the duckweed Spirodela polyrhiza. From the experimental results, it was evident that the acute toxicity of the catalyst depended on the exposure time and type of selected test organism. Zn-Fe LDHs toxicity was also affected by its physical state in suspension, chemical composition, as well as interaction with the bioassay test medium.

Quantitative determination of aloin, antioxidant activity, and toxicity of Aloe vera leaf gel products from Greece.

BACKGROUND: Aloe vera is a popular medicinal plant used widely by the cosmetic, pharmaceutical, and food industries. The A. vera leaf gel, which is used mostly for its positive effects on human health, contains over 75 different bioactive compounds, including aloin. Aloin is a toxic compound, and its content in A. vera leaf gel products depends on the different cultivation conditions and especially on leaf processing. RESULTS: In this study, A. vera leaf gel products, varied in terms of leaf processing, were analyzed using liquid chromatography for their aloin content, their antioxidant activity by 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonate) radical cation (ABTS·+ ) and the 2,2-diphenyl-1-picrylhydrazyl radical (DPPH· ) antioxidant activity assays and their toxicity against Aliivibrio fisheri and SH-SY5Y cells. In the samples processed with industrial methods and in those filtered in the lab, the content of aloin was found below the limit (0.1 mg L-1 ) of the EU legislation however, the unprocessed and unfiltered samples were found to contain more than 10 mg L-1 . Antioxidant activity was estimated to vary from 1.64 to 9.21 µmol Trolox mL-1 for DPPH· and from 0.73 to 5.14 µmol Trolox mL-1 for ABTS·+ . Toxicity values on A. fisheri, expressed as the concentration at 50% loss of initial luminescence, ranged from 0.03 to 0.09 mg mL-1 . The cytotoxic study indicated that aloin A at low concentrations (1 and 10 µg mL-1 ) protects SH-SY5Y cells from toxicity induced by hydrogen peroxide. CONCLUSIONS: Consequently, the filtration process of A. vera leaf gels, either laboratory or industrial, resulted in aloin A content below the EU legislation detection limits. © 2020 Society of Chemical Industry.

Toxicity assessment of total petroleum hydrocarbons in aquatic environments using the bioluminescent bacterium Aliivibrio fischeri.

Toxicity monitoring of environmental pollutants especially petroleum hydrocarbons as priority pollutants is an important environmental issue. This study addresses a rapid, sensitive and cost effective method for the detection of total petroleum hydrocarbons (TPHs) using Aliivibrio fischeri bioluminescence inhibition bioassay. At the first step, the optimum conditions including time, pH and temperature for growth of A. fischeri were determined. Then, two methods were used to evaluate the toxicity of petroleum compounds. In the first method, short-term (15 min) and long-term (16 h) toxicity assays were performed. In the second method luminescence kinetics of A. fischeri was investigated during 24 h. The results demonstrated the most appropriate time for the bacterial growth occurred 16 h after inoculation and optimum temperature and pH were found 25 °C and 7, respectively. Short-term and long-term toxicity did not indicate any toxicity for various concentrations of TPHs (30, 50, 110, 160, 220 mg/L). Considering the luminescence kinetics of A. fischeri the long-term assay was introduced as 6 h. The half maximal effective concentration (EC50) was achieved 1.77 mg/L of TPHs. It is concluded that the luminescence kinetics of A. fischeri can be a valuable approach for assessing toxicity of TPHs in aquatic environments.

Structural elucidation of bisphenol E and bisphenol S photoinduced by-products by high-resolution electrospray ionisation mass spectrometry and tandem mass spectrometry.

RATIONALE: Bisphenol E (BPE) and bisphenol S (BPS) have recently replaced bisphenol A as monomers for producing polycarbonates. However, BPE and BPS can pose hazards as they are known to be endocrine disruptors. Despite the huge increase in their use, there is a lack of data regarding the toxicity and effects of BPE and BPS. METHODS: We investigated the photoinduced transformation of BPE and BPS when subjected to sun-simulated radiation and using TiO2 as a photocatalyst. Analyses of BPE, BPS and their by-products were performed by high-performance liquid chromatography/high-resolution mass spectrometry (HPLC/HRMS) using an orbitrap mass analyzer in negative electrospray ionisation (ESI) mode. The chromatographic separations were achieved by employing a C18 reversed-phase column, and the transformation products (TPs) were elucidated structurally using HRMS and multistage MS experiments performed in collision-induced dissociation (CID) mode. RESULTS: The transformation of bisphenol S involved the formation of twelve by-products, while ten TPs were detected following BPE degradation. For bisphenol S, the cleavage of the molecule is a very important transformation route, together with the hydroxylation of the substrate to provide mono- and poly-hydroxylated TPs. For bisphenol E, the two main routes were hydroxylation and ring opening. Acute toxicity for BPS, BPE and their TPs was assessed using the Vibrio fischeri assay, highlighting that their initial transformation involved the formation of TPs that were more toxic than the parent compound. CONCLUSIONS: The HPLC/HRMS method developed was useful for characterising and identifying newly formed TPs from bisphenol E and bisphenol S. This study aimed to examine the structure of twenty by-products identified during TiO2 -mediated photolysis and to evaluate acute toxicity over time.

Ecotoxicity profile of heavily contaminated surface water of two rivers in Tunisia.

Persistent organic and inorganic contaminants generated by industrial effluent wastes poses a threat to the maintenance of aquatic ecosystems and public health. The Khniss and Hamdoun rivers, located in the central-east of Tunisia, receive regularly domestic and textile wastewater load. The present study aimed to survey the water quality of these rivers using physicochemical, analytical and toxicological approaches. In the physicochemical analysis, the recorded levels of COD and TSS in both samples exceed the Tunisian standards. Using the analytical approach, several metals and some textile dyes were detected. Indeed, 17 metals were detected in both samples in varying concentrations, which do not exceed the Tunisian standards. The sources of metals pollution can be of natural and anthropogenic origin. Three textile disperse dyes were detected with high levels compared to other studies: the disperse orange 37 was detected in the Khniss river with a concentration of 6.438 µg/L and the disperse red 1 and the disperse yellow 3 were detected in the Hamdoun river with concentrations of 3.873 µg/L and 1895 µg/L, respectively. Textile activities were the major sources of disperse dyes. For both samples, acute and chronic ecotoxicity was observed in all the studied organisms, however, no genotoxic activity was detected. The presence of metals and textile disperse dyes could be associated with the ecotoxicological effects observed in the river waters, in particular due to the industrial activity, a fact that could deteriorate the ecosystem and therefore threaten the human health of the population living in the study areas. Combining chemical and biological approaches, allowed the detection of water ecotoxicity in testing organisms and the identification of possible contributors to the toxicity observed in these multi-stressed water reservoirs.