Developing a Functional Poly(dimethylsiloxane)-Based Microbial Nanoculture System Using Dimethylallylamine.

Here, a novel poly(dimethylsiloxane) (PDMS)-based microbial culture system was investigated. Bacteria were encapsulated in functional and semipermeable membranes, mimicking the cell microenvironment and facilitating mass transport for interrogating microbial dynamics, thereby overcoming one of the major challenges associated with commercially available PDMS such as Sylgard 184. The hydrophobic nature and lack of control in the polymer network in Sylgard 184 significantly impede the the tunability of the transport and mechanical properties of the material as well as its usage as an isolation chamber for culturing and delivering microbes. Therefore, a novel PDMS composition was developed and functionalized with dimethylallylamine (DMAA) to alter its hydrophobicity and modify the polymer network. Characterization techniques including NMR spectroscopy, contact angle measurements, and sol-gel process were utilized to evaluate the physical and chemical properties of the newly fabricated membranes. Furthermore, the DMAA-containing polymer mixture was used as a proof of concept to generate hydrodynamically stable microcapsules and cultivate Escherichia coli cells in the functionalized capsules. The membrane exhibited a selective permeability to tetracycline, which diffused into the capsules to inhibit the growth of the encapsulated microbes. The functionality achieved here with the addition of DMAA, coupled with the high-throughput encapsulation technique, could prove to be an effective testing and diagnostic tool to evaluate microbial resistance, growth dynamics, and interspecies interaction and lays the foundation for in vivo models.

Replication of a Tissue Microenvironment by Thermal Scanning Probe Lithography.

Thermal scanning probe lithography (t-SPL) is a nanofabrication technique in which an immobilized thermolabile resist, such as polyphthalaldehyde (PPA), is locally vaporized by a heated atomic force microscope tip. Compared with other nanofabrication techniques, such as soft lithography and nanoimprinting lithography, t-SPL is more efficient and convenient as it does not involve time-consuming mask productions or complicated etching procedures, making it a promising candidate technique for the fast prototyping of nanoscale topographies for biological studies. Here, we established the direct use of PPA-coated surfaces as a cell culture substrate. We showed that PPA is biocompatible and that the deposition of allylamine by plasma polymerization on a silicon wafer before PPA coating can stabilize the immobilization of PPA in aqueous solutions. When seeded on PPA-coated surfaces, human mesenchymal stem cells (MSC) adhered, spread, and proliferated in a manner indistinguishable from cells cultured on glass surfaces. This allowed us to subsequently use t-SPL to generate nanotopographies for cell culture experiments. As a proof of concept, we analyzed the surface topography of bovine tendon sections, previously shown to induce morphogenesis and differentiation of MSC, by means of atomic force microscopy, and then "wrote" topographical data on PPA by means of t-SPL. The resulting substrate, matching the native tissue topography on the nanoscale, was directly used for MSC culture. The t-SPL substrate induced similar changes in cell morphology and focal adhesion formation in the MSC compared to native tendon sections, suggesting that t-SPL can rapidly generate cell culture substrates with complex and spatially accurate topographical signals. This technique may greatly accelerate the prototyping of models for the study of cell-matrix interactions.

Enzyme free glucose sensing by amino-functionalized silicon quantum dot.

Silicon quantum dots have become one of the most popular nanomaterials in biological applications for their excellent biocompatibility and optical properties. Herein, we synthesized amino-functionalized silicon quantum dots (NH2@SiQDs) via a simple microemulsion method, in which silicon tetrachloride and allylamine were used as source of silicon and functional group. NH2@SiQDs exhibits good water-solubility, high fluorescence quantum yield and optical stability. A non-enzymatic biosensor of glucose was developed based on the fluorescence quenching of NH2@SiQDs in response to glucose. The fluorescence response was linearly proportional to glucose in the concentration range of 1.0 × 10-6-9.0 × 10-5 mol/L and the detection limit was determined to be 3.0 × 10-7 mol/L. The developed glucose sensor was successfully applied in blood glucose analysis of human serum. Satisfactory result that agreed very well with traditional method was obtained.

Pre-grafted Group on PE Surface by DBD Plasma and Its Influence on the Oxygen Permeation with Coated SiOx.

In this paper, we report on polyethylene (PE) film modified by atmospheric dielectric barrier discharge (DBD) plasma prior to the deposition of SiOx coating to improve its barrier properties. Three kinds of monomers: allylamine, acrylic acid, and ethanol, are used to modify the PE surface. For comparison, Ar and O2 plasma pre-treatments are also performed. It is found that with the addition of a monomer in the Ar DBD plasma, the grafted active groups on PE surfaces lead to dense, pinhole-free growth of the SiOx film. The oxygen transmission rate (OTR) decreases from 700 cc/m²·day·atm. for the pristine to ca. 70 cc/m²·day·atm. for the pretreatment-coated PE, which is more than a 10-fold reduction. The relationship between the grafted monomer and the great decrease of OTR is then explored via chemical composition by attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR) and via morphology observation by atomic force microscopy (AFM) and scanning electron microscopy (SEM). The results show that the grafted functional groups of -NH2, -COOH and -OH increase the surface energy and promote the nucleation of Si⁻O radicals on polymeric surfaces, and the formation of network and cage structures in SiOx film contributes to the significant improvement of OTR.

Magnetic separation technology: Functional group efficiency in the removal of haze-forming proteins from wines.

Magnetic nanoparticles were modified by plasma polymerization, using allylamine, acrylic acid and 2-methyl-2-oxazoline as precursor to produce amine, carboxyl and oxazoline functional group rich surfaces. The nanoparticles were characterized by Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and zeta potential measurements. The capacity of nanoparticles carrying different surface properties to remove haze-forming proteins from Sémillon and Sauvignon Blanc unfined wines was examined by high-performance liquid chromatography (HPLC). The protein capture efficiency of the modified surfaces decreases in the following order: COOH > POx > NH2. This study will help optimising the design of this new technology for the selective removal of haze proteins from white wines.

Antifungal Agents: Design, Synthesis, Antifungal Activity and Molecular Docking of Phloroglucinol Derivatives.

Pseudoaspidinol is a phloroglucinol derivative with Antifungal activity and is a major active component of Dryopteris fragrans. In our previous work, we studied the total synthesis of pseudoaspidinol belonging to a phloroglucinol derivative and investigated its antifungal activity as well as its intermediates. However, the results showed these compounds have low antifungal activity. In this study, in order to increase antifungal activities of phloroglucinol derivatives, we introduced antifungal pharmacophore allylamine into the methylphloroglucinol. Meanwhile, we remained C1⁻C4 acyl group in C-6 position of methylphloroglucinol using pseudoaspidinol as the lead compound to obtain novel phloroglucinol derivatives, synthesized 17 compounds, and evaluated antifungal activities on Trichophyton rubrum and Trichophyton mentagrophytes in vitro. Molecular docking verified their ability to combine the protein binding site. The results indicated that most of the compounds had strong antifungal activity, in which compound 17 were found to be the most active on Trichophyton rubrum with Minimum Inhibitory Concentration (MIC) of 3.05 µg/mL and of Trichophyton mentagrophytes with MIC of 5.13 µg/mL. Docking results showed that compounds had a nice combination with the protein binding site. These researches could lay the foundation for developing antifungal agents of clinical value.

Surface modification of polypropylene for enhanced layer-by-layer deposition of polyelectrolytes.

We have performed three distinct plasma enhanced chemical vapor deposition procedures that can be widely and consistently used in commercially available plasma systems to modify the surface of hydrocarbon-based biomaterials such as polypropylene. In particular, we have evaluated the feasibility of these procedures to provide consistent and stable charged substrates to perform layer-by-layer (LbL) coatings. Surface characterization of both plasma and LbL coatings were done using X-ray photoelectron spectroscopy, attenuated total reflection-Fourier transform infrared spectroscopy, contact angle measurements and surface staining. Results showed successful surface grafting of functional groups in all plasma procedures that led to increased hydrophilicity and uniform LbL coatings with different efficiencies. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 106A: 2078-2085, 2018.

Design of Two Alternative Routes for the Synthesis of Naftifine and Analogues as Potential Antifungal Agents.

Two practical and efficient approaches have been implemented as alternative procedures for the synthesis of naftifine and novel diversely substituted analogues 16 and 20 in good to excellent yields, mediated by Mannich-type reactions as the key step of the processes. In these approaches, the γ-aminoalcohols 15 and 19 were obtained as the key intermediates and their subsequent dehydration catalyzed either by Brønsted acids like H2SO4 and HCl or Lewis acid like AlCl3, respectively, led to naftifine, along with the target allylamines 16 and 20. The antifungal assay results showed that intermediates 18 (bearing both a ß-aminoketo- and N-methyl functionalities in their structures) and products 20 were the most active. Particularly, structures 18b, 18c, and the allylamine 20c showed the lowest MIC values, in the 0.5-7.8 µg/mL range, against the dermatophytes Trichophyton rubrum and Trichophyton mentagrophytes. Interesting enough, compound 18b bearing a 4-Br as the substituent of the phenyl ring, also displayed high activity against Candida albicans and Cryptococcus neoformans with MIC80 = 7.8 µg/mL, being fungicide rather than fungistatic with a relevant MFC value = 15.6 µg/mL against C. neoformans.

Development and optimization of a new synthetic process for lorcaserin.

A two-step process to synthesize racemic lorcaserin was developed from 2-(4-chlorophenyl)ethanol via formation of bromide or tosylate derivatives. These derivatives were reacted with allylamine in neat conditions to provide pure N-(4-chlorophenethyl)allylammonium chloride. This compound was cyclized in neat conditions using aluminum or zinc chloride to give racemic lorcaserin. After resolution of enantiomers, the wrong enantiomer was racemized and recycled to give new R-lorcaserin.

Restricted cell functions on micropillars are alleviated by surface-nanocoating with amino groups.

The topographical and chemical surface features of biomaterials are sensed by the cells, affecting their physiology at the interface. When placed on titanium, we recently discovered osteoblasts attempted caveolae-mediated phagocytosis of the sharp-edged microstructures. This active, energy-consuming process resulted in decreased osteoblastic cell functions (e.g. secretion of extracellular matrix proteins). However, chemical modification with plasma polymerized allylamine (PPAAm) was able to amplify osteoblast adhesion and spreading, resulting in better implant osseointegration in vivo In the present in vitro study, we analyzed whether this plasma polymer nanocoating is able to attenuate the microtopography-induced changes of osteoblast physiology. On PPAAm, we found cells showed a higher cell interaction with the geometrical micropillars by 30 min, and a less distinct reduction in the mRNA expression of collagen type I, osteocalcin and fibronectin after 24 h of cell growth. Interestingly, the cells were more active and sensitive on PPAAm-coated micropillars, and react with a substantial Ca2+ ion mobilization after stimulation with ATP. These results highlight that it is important for osteoblasts to establish cell surface contact for them to perform their functions.

Pulsed electric field-assisted sensitization of multidrug-resistant Candida albicans to antifungal drugs.

AIM: Determine the influence of pH on the inactivation efficiency of Candida albicans in pulsed electric fields (PEF) and evaluate the possibilities for sensitization of a drug-resistant strain to antifungal drugs. MATERIALS & METHODS: The effects of PEF (2.5-25 kVcm-1) with fluconazole, terbinafine and naftifine were analyzed at a pH range of 3.0-9.0. Membrane permeabilization was determined by flow cytometry and propidium iodide. RESULTS: PEF induced higher inactivation of C. albicans at low pH and increased sensitivity to terbinafine and naftifine to which the strain was initially resistant. Up to 5 log reduction in cell survival was achieved. CONCLUSION: A proof of concept that electroporation can be used to sensitize drug-resistant microorganisms was presented, which is promising for treating biofilm-associated infections.

Exploring the pH Sensitivity of Poly(allylamine) Phosphate Supramolecular Nanocarriers for Intracellular siRNA Delivery.

Silencing RNA (siRNA) technologies emerge as a promising therapeutic tool for the treatment of multiple diseases. An ideal nanocarrier (NC) for siRNAs should be stable at physiological pH and release siRNAs in acidic endosomal pH, fulfilling siRNA delivery only inside cells. Here, we show a novel application of polyamine phosphate NCs (PANs) based on their capacity to load negatively charged nucleic acids and their pH stability. PANs are fabricated by complexation of phosphate anions from phosphate buffer solution (PB) with the amine groups of poly(allylamine) hydrochloride as carriers for siRNAs. PANs are stable in a narrow pH interval, from 7 to 9, and disassemble at pH's higher than 9 and lower than 6. siRNAs are encapsulated by complexation with poly(allylamine) hydrochloride before or after PAN formation. PANs with encapsulated siRNAs are stable in cell media. Once internalized in cells following endocytic pathways, PANs disassemble at the low endosomal pH and release the siRNAs into the cytoplasm. Confocal laser scanning microscopy (CLSM) images of Rhodamine Green labeled PANs (RG-PANs) with encapsulated Cy3-labeled siRNA in A549 cells show that siRNAs are released from the PANs. Colocalization experiments with labeled endosomes and either labeled siRNAs prove the translocation of siRNAs into the cytosol. As a proof of concept, it is shown that PANs with encapsulated green fluorescence protein (GFP) siRNAs silence GFP in A549 cells expressing this protein. Silencing efficacy was evaluated by flow cytometry, CLSM, and Western blot assays. These results open the way for the use of poly(allylamine) phosphate nanocarriers for the intracellular delivery of genetic materials.

pH-dependent lipid vesicle interactions with plasma polymerized thin films.

Model lipid vesicle and supported lipid bilayer (SLB) systems are used in a variety of applications including biosensing, cell membrane mimics, and drug delivery. Exposure of a surface to a vesicle solution provides a straightforward method for creating such systems via vesicle adsorption and collapse. However, this process is complex and the relationship between the surface physicochemical properties and vesicle collapse is poorly understood. Plasma polymers are thin conformal films that can be applied to a variety of materials to modify surface properties. This paper uses quartz crystal microbalance with dissipation and fluorescence recovery after photobleaching (FRAP) to explore lipid vesicle interactions with plasma polymerized acrylic acid (ppAAc), allylamine (ppAAm), and ppAAc/ppAAm micropatterns. Vesicle interactions were dependent on plasma polymer chemistry and pH of the buffer solution. Vesicles readily and stably adsorbed to ppAAm over a wide pH range. ppAAc demonstrated limited interactions at pH 7 and vesicle adsorption at pH 4. Vesicle collapse and SLB formation could be induced using a pH change. FRAP was used to explore the fluidity of the lipid structures on both the patterned and unpatterned plasma polymer films. On ppAAm/ppAAc micropatterns, pH transitions combined with the presence of chemically distinct regions on the same substrate enabled immobile lipid islands on ppAAc to be surrounded by fluid lipid regions on ppAAm. This work demonstrates that plasma polymer films could enable spatially controlled vesicle adsorption and SLB formation on a wide variety of different substrates.

Cationic copolymer augments membrane permeabilizing activity of an amphiphilic peptide.

Membrane disruptive peptides (also called membrane fusogenic peptides) have been employed for cytosolic delivery of macromolecules such as nucleic acids and proteins. We reported previously that the cationic graft copolymer, poly(allylamine)-graft-dextran (PAA-g-Dex), augments membrane disruptive activity of the negatively charged E5 peptide. Strong membrane disruptive activity was observed in the presence of the copolymer at both acidic and neutral pH. In this paper, activities of E5/PAA-g-Dex mixture were further explored. Membrane permeabilization activity of E5/PAA-g-Dex was dependent on concentrations of both E5 and PAA-g-Dex, indicating that a complex between E5 and PAA-g-Dex produced the activity. Since the activity of peptide/PAA-g-Dex was peptide sequence-specific, we reasoned that PAA-g-Dex activated membrane-permeabilization activity by facilitating folding of E5 into its active conformation. The membrane permeabilization activity of E5/PAA-g-Dex resulted in transportation of bovine serum albumin into HL-60 cells with less cellular toxicity than digitonin, a naturally occurring surfactant used for delivery of macromolecules into cells.

Evaluation of Adsorption Characteristics of a Fibrous Adsorbent Containing Zwitter-Ionic Functional Group, Targeting Organic Acids.

Diallylamine-maleic acid copolymer (DAM)-nonwoven fabric (DAM-f), a fibrous adsorbent, contains DAM with zwitter-ionic functional groups and forms a hydration layer on the surface. The aim of this report was to evaluate the adsorption selectivity of DAM-f to semi-volatile organic acid (C1-C5). In the aqueous phase, formic acid dissolved in the hydration layer bound to the imino group of DAM-f due to anion exchange interaction. In the gas phase, the adsorption amounts of organic acids increased with the exposure time. Moreover, the adsorption rate constants correlated with the air/water partition coefficients (log Kaw) for formic acid, propionic acid, butyric acid, valeric acid and isovaleric acid, except for acetic acid. These results indicate that DAM-f is highly selective to hydrophilic compounds which easily move from the air to the hydration layer of DAM-f.

Biodegradable mesoporous delivery system for biomineralization precursors.

Scaffold supplements such as nanoparticles, components of the extracellular matrix, or growth factors have been incorporated in conventional scaffold materials to produce smart scaffolds for tissue engineering of damaged hard tissues. Due to increasing concerns on the clinical side effects of using large doses of recombinant bone-morphogenetic protein-2 in bone surgery, it is desirable to develop an alternative nanoscale scaffold supplement that is not only osteoinductive, but is also multifunctional in that it can perform other significant bone regenerative roles apart from stimulation of osteogenic differentiation. Because both amorphous calcium phosphate (ACP) and silica are osteoinductive, a biodegradable, nonfunctionalized, expanded-pore mesoporous silica nanoparticle carrier was developed for loading, storage, and sustained release of a novel, biosilicification-inspired, polyamine-stabilized liquid precursor phase of ACP for collagen biomineralization and for release of orthosilicic acid, both of which are conducive to bone growth. Positively charged poly(allylamine)-stabilized ACP (PAH-ACP) could be effectively loaded and released from nonfunctionalized expanded-pore mesoporous silica nanoparticles (pMSN). The PAH-ACP released from loaded pMSN still retained its ability to infiltrate and mineralize collagen fibrils. Complete degradation of pMSN occurred following unloading of their PAH-ACP cargo. Because PAH-ACP loaded pMSN possesses relatively low cytotoxicity to human bone marrow-derived mesenchymal stem cells, these nanoparticles may be blended with any osteoconductive scaffold with macro- and microporosities as a versatile scaffold supplement to enhance bone regeneration.

Accelerated cell-surface interlocking on plasma polymer-modified porous ceramics.

Excellent osseointegration of permanent implants is crucial for the long lasting success of the implantation. To improve the osseointegrative potential, bio-inert titanium alloy surfaces (Ti6Al4V) are modified by plasma chemical oxidation (PCO®) of the titanium-oxide layer to a non-stoichiometric, amorphous calcium phosphate layer. The native titanium-oxide film measuring only a few nanometers is converted by PCO® to a thick porous calcium phosphate layer of about 10µm. In a second step the PCO surface is combined with a cell adhesive plasma-polymerized allylamine (PPAAm) nano film (5 and 50nm). Independent of the PPAAm coating homogeneity, the human osteoblast-like MG-63 cells show a remarkable increase in cell size and well-developed filopodia. Analyses of the actin cytoskeleton reveal that the cells mold to the pore shape of the PPAAm-covered PCO, thereby establishing a strong attachment to the surface. Interestingly, we could demonstrate that even though our untreated PCO shows excellent hydrophilicity, this alone is not sufficient to facilitate fast cell spreading, but the positive surface charges mediated by PPAAm. This multilayer composite material guarantees enhanced interlocking of the cells with the porous surface.

The impact of allylamine-bile acid combinations on cell delivery microcapsules in diabetes.

OBJECTIVE: In a recent study, we developed a new microencapsulating method for ß-cell microencapsulation, but cell viability declined rapidly, post microencapsulation, due to potential polymer-polyelectrolyte chelation and non-porous microcapsules' membranes resulting in cell apoptosis. Thus, this study tested the effects of incorporating cationic polyamine at 1% w/v, on microcapsule strength and cell viability, in the absence or presence of an anionic tertiary bile acid (ATBA) with potential cell-protective effects. METHODS: 1% w/v polyamine was used without or with ATBA, to form ß-cell microcapsules and physical and biological analyses was carried out 50 h post microencapsulation. RESULTS: Microcapsules containing 1% w/v polyamine showed weak physical properties and low cell viability and ATBA incorporation resulted in >30% reduction in cell viability and increased levels of pro-inflammatory cytokines. CONCLUSION: Neither 1% w/v polyamine nor the presence of ATBA resulted in optimised cell viability, but rather reduced cell viability, enhanced inflammation and lowered insulin secretion.

Synthesis, characterization and biological application of four novel metal-Schiff base complexes derived from allylamine and their interactions with human serum albumin: Experimental, molecular docking and ONIOM computational study.

Novel metal-based drug candidate including VOL2, NiL2, CuL2 and PdL2 have been synthesized from 2-hydroxy-1-allyliminomethyl-naphthalen ligand and have been characterized by means of elemental analysis (CHN), FT-IR and UV-vis spectroscopies. In addition, (1)H and (13)C NMR techniques were employed for characterization of the PdL2 complex. Single-crystal X-ray diffraction technique was utilized to characterise the structure of the complexes. The Cu(II), Ni(II) and Pd(II) complexes show a square planar trans-coordination geometry, while in the VOL2, the vanadium center has a distorted tetragonal pyramidal N2O3 coordination sphere. The HSA-binding was also determined, using fluorescence quenching, UV-vis spectroscopy, and circular dichroism (CD) titration method. The obtained results revealed that the HSA affinity for binding the synthesized compounds follows as PdL2>CuL2>VOL2>NiL2, indicating the effect of metal ion on binding constant. The distance between these compounds and HSA was obtained based on the Förster's theory of non-radiative energy transfer. Furthermore, computational methods including molecular docking and our Own N-layered Integrated molecular Orbital and molecular Mechanics (ONIOM) were carried out to investigate the HSA-binding of the compounds. Molecular docking calculation indicated the existence of hydrogen bond between amino acid residues of HSA and all synthesized compounds. The formation of the hydrogen bond in the HSA-compound systems leads to their stabilization. The ONIOM method was utilized in order to investigate HSA binding of compounds more precisely in which molecular mechanics method (UFF) and semi empirical method (PM6) were selected for the low layer and the high layer, respectively. The results show that the structural parameters of the compounds changed along with binding to HSA, indicating the strong interaction between the compounds and HSA. The value of binding constant depends on the extent of the resultant changes. This should be mentioned that both theoretical methods calculated the Kb values in the same sequence and are in a good agreement with the experimental data.

Amperometric Glucose Biosensor Based on Effective Self-Assembly Technology for Preparation of Poly(allylamine hydrochloride)/Au Nanoparticles Multilayers.

Novel nanomaterials and nanotechnology for use in bioassay applications represent a rapidly advancing field. This study developed a novel method to fabricate the glucose biosensor with good gold nanoparticles (AuNPs) fixed efficiency based on effective self-assembly technology for preparation of multilayers composed of poly(allylamine hydrochloride) (PAH) and AuNPs. The electrochemical properties of the biosensor based on (AuNPs/PAH)n/AuNPs/glucose oxide (GOD) with different multilayers were systematically investigated. Among the resulting glucose biosensors, electrochemical properties of the biosensor with three times self-assembly processes ((AuNPs/PAH)3/AuNPs/GOD) is best. The GOD biosensor exhibited a fast amperometric response (5 s) to glucose, a good linear current-time relation over a wide range of glucose concentrations from 0.05 to 162 mM, and a low detection limit of 0.029 mM. The GOD biosensor modified with (AuNPs/PAH)n layers will have essential significance and practical application in future owing to the simple method of fabrication and good performance.