A suitable and effective stepwise oxidative refolding procedure for highly-cationic tetrameric avidin in nucleic acid free conditions.

Optimized conditions are needed to refold recombinant proteins from bacterial inclusion bodies into their biologically active conformations. In this study, we found two crucial requirements for efficient refolding of cationic tetrameric chicken avidin. The first step is to eliminate nucleic acid contaminants from the bacterial inclusion body. The electrostatic interactions between the remaining nucleic acids and proteins strongly enhanced protein aggregation during the refolding process. The cysteine specific reversible S-cationization procedure was successfully employed for large-scale preparation of nucleic acid free denatured protein without purification tag system. The second step is the intramolecular disulfide formation prior to refolding in dialysis removing denaturant. Disulfide intact monomeric avidin showed efficient formation of biologically active tetrameric conformation during the refolding process. Using this optimized refolding procedure, highly cationic avidin derivative designed as an intracellular delivery carrier of biotinylated protein was successfully prepared.

Simultaneous optical and electrochemical label-free biosensing with ITO-coated lossy-mode resonance sensor.

In this work we discuss a new label-free biosensing device based on indium tin oxide (ITO) overlaid section of a multimode optical fiber fused silica core. The sensor has been used to optical measurements also simultaneously interrogated electrochemically (EC). Due to optimized thickness and optical properties of ITO film, a lossy-mode resonance (LMR) could be observed in the optical domain, where electrical properties of the film allowed for application of the sensor as a working electrode in an EC setup. It has been confirmed that the LMR response depends on optical properties of the external medium, as well as potential applied to the electrode during cyclic voltammetry. After the ITO surface functionalization with amine groups and covalently attached biotin, the device has been applied for label-free biosensing of avidin in both the domains simultaneously. On the example of biotin-avidin detection system it was demonstrated that when avidin concentration increases a decrease in current and increase in LMR wavelength shift were recorded in EC and optical domain, respectively. Both optical and EC responses follow the protein interaction process, and thus can be used as cross-verification of the readouts. Moreover, an extended information has been achieved comparing to solely EC interrogation, i.e., the grafting process of biotin and avidin was directly monitored optically displaying individual steps of an incubation procedure.

Ultrasensitive tantalum oxide nano-coated long-period gratings for detection of various biological targets.

In this work we discussed a label-free biosensing application of long-period gratings (LPGs) optimized in refractive index (RI) sensitivity by deposition of thin tantalum oxide (TaOx) overlays. Comparing to other thin film and materials already applied for maximizing the RI sensitivity, TaOx offers good chemical and mechanical stability during its surface functionalization and other biosensing experiments. It was shown theoretically and experimentally that when RI of the overlay is as high as 2 in IR spectral range, for obtaining LPGs ultrasensitive to RI, the overlay's thickness must be determined with subnanometer precision. In this experiment the TaOx overlays were deposited using Atomic Layer Deposition method that allowed for achieving overlays with exceptionally well-defined thickness and optical properties. The TaOx nano-coated LPGs show RI sensitivity determined for a single resonance exceeding 11,500 nm/RIU in RI range nD= 1.335-1.345 RIU, as expected for label-free biosensing applications. Capability for detection of various in size biological targets, i.e., proteins (avidin) and bacteria (Escherichia coli), with TaOx-coated LPGs was verified using biotin and bacteriophage adhesin as recognition elements, respectively. It has been shown that functionalization process, as well as type of recognition elements and target analyte must be taken into consideration when the LPG sensitivity is optimized. In this work optimized approach made possible detection of small in size biological targets such as proteins with sensitivity reaching 10.21 nm/log(ng/ml).

Affinity purification of the avidin protein family, based on crystal structures of avidin-HABA complexes.

Since the importance of the high affinity between avidin and biotin, Kd = 3 × 10-16 M, gained universal recognition, numerous chemical, biological and medical avidin-biotin based applications have been developed. However, in some cases the high affinity may be a disadvantage, as this interaction is irreversible under physiological conditions. The dye, 4'-hydroxyazobenzene-2-carboxylic acid (HABA), binds avidin, at the biotin binding site, as determined by X-ray, at a much lower affinity constant, Kd = 6 × 10-6 M. We prepared a HABA affinity column (amber colored). Avidin bound to the column at a pH between 4 and 8.5, causing a change of color to red, and it could be eluted at mild conditions with buffers containing biotin, HABA, 1.5 M potassium chloride or a pH lower than 4.0 or higher than 8.5. Avidin eluted with HABA, created a red avidin-HABA complex, which was visualized. HABA free avidin was obtained by dialysis, which was followed by the loss of red coloration. The novel and easy to use HABA-affinity column was employed in our lab to prepare pure, fully glycosylated avidin from egg white. Most importantly, it may serve as an ideal tool for educational purposes, illuminating concepts of molecular recognition, reversible molecular binding, structure-based molecular design and solid phase chemical synthesis, as it is a reliable and visible reagent.

Immobilized sialyltransferase fused to a fungal biotin-binding protein: Production, properties, and applications.

A ß-galactoside α2,6-sialyltransferase (ST) from the marine bacterium Photobacterium sp. JT-ISH-224 with a broad acceptor substrate specificity was fused to a fungal biotin-binding protein tamavidin 2 (TM2) to produce immobilized enzyme. Specifically, a gene for the fusion protein, in which ST from Photobacterium sp. JT-ISH-224 and TM2 were connected via a peptide linker (ST-L-TM2) was constructed and expressed in Escherichia coli. The ST-L-TM2 was produced in the soluble form with a yield of approximately 15,000 unit/300 ml of the E. coli culture. The ST-L-TM2 was partially purified and part of it was immobilized onto biotin-bearing magnetic microbeads. The immobilized ST-L-TM2 onto microbeads could be used at least seven consecutive reaction cycles with no observed decrease in enzymatic activity. In addition, the optimum pH and temperature of the immobilized enzyme were changed compared to those of a free form of the ST. Considering these results, it was strongly expected that the immobilized ST-L-TM2 was a promising tool for the production of various kind of sialoligosaccharides.

Expression, purification, and immobilization of recombinant tamavidin 2 fusion proteins.

Tamavidin 2 is a fungal avidin-like protein that binds biotin with high affinity. Unlike avidin or streptavidin, tamavidin 2 in soluble form is produced at high levels in Escherichia coli. In this chapter, we describe a method for immobilization and purification of recombinant proteins with the use of tamavidin 2 as an affinity tag. The protein fused to tamavidin 2 is tightly immobilized and simultaneously purified on biotinylated magnetic microbeads without loss of activity.

[Irreversible chemical AFM-fishing for the detection of low-copied proteins].

The atomic-force microscopy-based method of irreversible chemical AFM-fishing (AFM-IF(Ch)) has been developed for the detection of proteins at ultra-low concentrations in solution. Using this method, a very low concentration of horseradish peroxidase (HRP) protein (10(-17) M) was detected in solution. A theoretical model that allows the description of obtained experimental data, is proposed. This model takes into consideration both the transport of the protein from the bulk solution onto the AFM-chip surface and its irreversible binding to the activated area.

Hollow-fiber flow field-flow fractionation with multi-angle laser scattering detection for aggregation studies of therapeutic proteins.

The rapid development of protein-based pharmaceuticals highlights the need for robust analytical methods to ensure their quality and stability. Among proteins used in pharmaceutical applications, an important and ever increasing role is represented by monoclonal antibodies and large proteins, which are often modified to enhance their activity or stability when used as drugs. The bioactivity and the stability of those proteins are closely related to the maintenance of their complex structure, which however are influenced by many external factors that can cause degradation and/or aggregation. The presence of aggregates in these drugs could reduce their bioactivity and bioavailability, and induce immunogenicity. The choice of the proper analytical method for the analysis of aggregates is fundamental to understand their (size) dimensional range, their amount, and if they are present in the sample as generated by an aggregation or as an artifact due to the method itself. Size exclusion chromatography is one of the most important techniques for the quality control of pharmaceutical proteins; however, its application is limited to relatively low molar mass aggregates. Among the techniques for the size characterization of proteins, field-flow fractionation (FFF) represents a competitive choice because of its soft mechanism due to the absence of a stationary phase and application in a broader size range, from nanometer- to micrometer-sized analytes. In this paper, the microcolumn variant of FFF, the hollow-fiber flow FFF, was online coupled with multi-angle light scattering, and a method for the characterization of aggregates with high reproducibility and low limit of detection was demonstrated employing an avidin derivate as sample model.

Generation of a miniaturized free-flow electrophoresis chip based on a multi-lamination technique--isoelectric focusing of proteins and a single-stranded DNA fragment.

Free-flow electrophoresis techniques have been applied for separations in various areas of chemistry and biochemistry. Here we focus on the generation of a free-flow electrophoresis chip and direct monitoring of the separation of different molecules in the separation bed of the miniaturized chip. We demonstrate a fast and efficient way to generate a low-cost micro-free-flow electrophoresis (µFFE) chip with a filling capacity of 9.5 µL based on a multi-lamination technique. Separating webs realized by two transfer-adhesive tapes avoid the problem of gas bubbles entering the separation area. The chip is characterized by isoelectric focusing markers (IEF markers). The functionality of the chip is demonstrated by free-flow isoelectric focusing (FFIEF) of the proteins BSA (bovine serum albumin) and avidin and a single-stranded DNA (ssDNA) fragment in the pH range 3 to 10. The separation voltage ranges between 167 V cm(-1) and 422 V cm(-1), depending on the application.

Selective adsorption of protein molecules on phase-separated sapphire surfaces.

Site-selective adsorption of protein molecules was found on sapphire surfaces that exhibit a phase separation into two domains: weakly charged hydrophobic domain and negatively charged hydrophilic one. Ferritin and bovine serum albumin molecules, which are negatively charged in a buffer solution, are adsorbed to the hydrophobic domains. Avidin molecules, which are positively charged, are adsorbed to the other domain. Fibrinogen molecules, which consist of both negative and positive modules, are adsorbed to the whole sapphire surface. Hemoglobin molecules, whose net charge is almost zero, are also adsorbed to the whole surfaces. These results indicate that electrostatic double layer interaction is the primary origin of the observed selectivity. Dependence of protein adsorption or desorption behaviors on the pH value can also be interpreted by the proposed model.

Insecticidal activity of recombinant avidin produced in yeast.

An expression construct encoding chicken (Gallus gallus) avidin was assembled from amplified fragments of genomic DNA. Recombinant, functional avidin was produced in Pichia pastoris, with yields of up to 80 mg/l of culture supernatant. The recombinant avidin had similar insecticidal activity to egg white avidin when assayed against larvae of a lepidopteran crop pest, cabbage moth (Mamestra brassicae), causing >90% reduction in growth and 100% mortality when fed in optimised diets at levels of 1.5 microM and 15 microM (100 ppm and 1000 ppm wet weight of recombinant protein). The recombinant protein was also highly toxic to a hemipteran pest, the pea aphid (Acyrthosiphon pisum), when fed in liquid artificial diet, causing 100% mortality after 4 days when present at concentrations > or = 3.8 microM (0.25 mg/ml, 250 ppm). Mortality was dose-dependent, with an estimated LC(50) of 2.1 microM. Toxicity to A. pisum was prevented by biotin supplementation of diet. In contrast, avidin had no significant effects on the survival of cereal aphid (Sitobion avenae) at concentrations up to 30 microM in liquid diet. Analysis of genomic DNA showed that symbionts from both aphid species lack the ability to synthesise biotin de novo. Cereal aphids appear to be less sensitive to recombinant avidin in the diet through proteolysis of the ingested protein, which would allow recovery of bound biotin.

Tamavidins--novel avidin-like biotin-binding proteins from the Tamogitake mushroom.

Novel biotin-binding proteins, referred to herein as tamavidin 1 and tamavidin 2, were found in a basidiomycete fungus, Pleurotus cornucopiae, known as the Tamogitake mushroom. These are the first avidin-like proteins to be discovered in organisms other than birds and bacteria. Tamavidin 1 and tamavidin 2 have amino acid sequences with 31% and 36% identity, respectively, to avidin, and 47% and 48% identity, respectively, to streptavidin. Unlike any other biotin-binding proteins, tamavidin 1 and tamavidin 2 are expressed as soluble proteins at a high level in Escherichia coli. Recombinant tamavidin 2 was purified as a tetrameric protein in a single step by 2-iminobiotin affinity chromatography, with a yield of 5 mg per 100 mL culture of E. coli. The kinetic parameters measured by a BIAcore biosensor indicated that recombinant tamavidin 2 binds biotin with high affinity, in a similar manner to binding by avidin and streptavidin. The overall crystal structure of recombinant tamavidin 2 is similar to that of avidin and streptavidin. However, recombinant tamavidin 2 is immunologically distinct from avidin and streptavidin. Tamavidin 2 and streptavidin are very similar in terms of the arrangement of the residues interacting with biotin, but different with regard to the number of hydrogen bonds to biotin carboxylate. Recombinant tamavidin 2 is more stable than avidin and streptavidin at high temperature, and nonspecific binding to DNA and human serum by recombinant tamavidin 2 is lower than that for avidin. These findings highlight tamavidin 2 as a probable powerful tool, in addition to avidin and streptavidin, in numerous applications of biotin-binding proteins.

An affinity-based strategy for the design of selective displacers for the chromatographic separation of proteins.

We describe an affinity-based strategy for designing selective protein displacers for the chromatographic purification of proteins. To design a displacer that is selective for a target protein, we attached a component with affinity for the target protein to a resin-binding component; we then tested the ability of such displacers to selectively retain the target protein on a resin relative to another protein having a similar retention time. In particular, we synthesized displacers based on biotin, which selectively retained avidin as compared to aprotinin on SP Sepharose high performance resin. In addition, we have extended this approach to develop an affinity-peptide-based displacer that discriminates between lysozyme and cytochrome c. Here, a selective displacer was designed from a lysozyme-binding peptide that had been identified and optimized previously using phage-display technology. Our results suggest a general strategy for designing highly selective affinity-based displacers by identifying molecules (e.g., peptides) that bind to a protein of interest and using an appropriate linker to attach these molecules to a moiety that binds to the stationary phase.

Hydrophobin (HFBI): A potential fusion partner for one-step purification of recombinant proteins from insect cells.

Hydrophobins play an important role in binding and assembly of fungal surface structures as well as in medium-air interactions. These, hydrophobic properties provide interesting possibilities when purification of macromolecules is concerned. In aqueous micellar two-phase systems, based on surfactants, the water soluble hydrophobins are concentrated inside micellar structures and, thus, distributed to defined aqueous phases. This, one-step purification is attractive particularly when large-scale production of recombinant proteins is concerned. In the present study the hydrophobin HFBI of Trichoderma reesei was expressed as an N-terminal fusion with chicken avidin in baculovirus infected insect cells. The intracellular distribution of the recombinant fusion construct was analyzed by confocal microscopy and the protein subsequently purified from cytoplasmic extracts in an aqueous micellar two-phase system by using a non-ionic surfactant. The results show that hydrophobin and an avidin fusion thereof were efficiently expressed in insect cells and that these hydrophobic proteins could be efficiently purified from these cells in one-step by adopting an aqueous micellar two-phase system.

A smart surface in a microfluidic chip for controlled protein separation.

The smart surface created in a microfluidic chip has shown the capability of adsorbing and releasing proteins under electrical control. The inner surface of the chip channel was first coated by a thin layer of Au through sputtering and was subsequently modified with loosely packed self-assembled monolayers (SAMs) of thiols with terminal carboxylic or amino groups. Upon application of an external electric potential to the gold substrate, reversible conformational transformation between "bent" and "straight" states for the anchored mercapto chains could be modulated, through the electrostatic effect between the ionized terminal groups and the charged gold substrate. Thus, a hydrophobic or hydrophilic channel surface was established and could be reversibly switched electrochemically. Accordingly, the microchips prepared in this way can reversibly and selectively adsorb and release differently charged proteins under electrical control. Two model proteins, avidin and streptavidin, were demonstrated to be readily adsorbed by the smart chips under negative and positive potential, respectively. Also, more than 90 % of the adsorbed proteins could be released upon an electrical command. Furthermore, these chips were applied to the controlled separation of avidin and streptavidin mixtures with 1:1 and 1:1000 molar ratios. Under specific applied potentials, the chips adsorbed a certain protein from the mixture whereas the other protein was allowed to flow out, after which the adsorbed protein could be released by switching the applied potential. Thus, two eluted protein fractions were obtained and the separation of the two proteins was achieved. For the former mixture, each eluted fraction contained up to approximately 80-90 % avidin or streptavidin. For the latter mixture, the resulting separation efficiency indicated that the molar ratio of avidin and streptavidin could be increased from 1:1000 to about 32:1 after five run separations.

Controlling quaternary structure assembly: subunit interface engineering and crystal structure of dual chain avidin.

Dual chain avidin (dcAvd) is an engineered avidin form, in which two circularly permuted chicken avidin monomers are fused into one polypeptide chain. DcAvd can theoretically form two different pseudotetrameric quaternary assemblies because of symmetry at the monomer-monomer interfaces. Here, our aim was to control the assembly of the quaternary structure of dcAvd. We introduced the mutation I117C into one of the circularly permuted domains of dcAvd and scanned residues along the 1-3 subunit interface of the other domain. Interestingly, V115H resulted in a single, disulfide locked quaternary assembly of dcAvd, whereas I117H could not guide the oligomerisation process even though it stabilised the protein. The modified dcAvd forms were found to retain their characteristic pseudotetrameric state both at high and low pH, and were shown to bind D-biotin at levels comparable to that of wild-type chicken avidin. The crystal structure of dcAvd-biotin complex at 1.95 Angstroms resolution demonstrates the formation of the functional dcAvd pseudotetramer at the atomic level and reveals the molecular basis for its special properties. Altogether, our data facilitate further engineering of the biotechnologically valuable dcAvd scaffold and gives insights into how to guide the quaternary structure assembly of oligomeric proteins.

Factors dictating the pseudocatalytic efficiency of avidins.

The hydrolysis of biotinyl p-nitrophenyl ester (BNP) by a series of avidin derivatives was examined. Surprisingly, a hyperthermostable avidin-related protein (AVR4) was shown to display extraordinary yet puzzling hydrolytic activity. In order to evaluate the molecular determinants that contribute to the reaction, the crystal structure of AVR4 was compared with those of avidin, streptavidin and key mutants of the two proteins in complex with biotinyl p-nitroanilide (BNA), the inert amide analogue of BNP. The structures revealed that a critical lysine residue contributes to the hydrolysis of BNP by avidin but has only a minor contribution to the AVR4-mediated reaction. Indeed, the respective rates of hydrolysis among the different avidins reflect several molecular parameters, including binding-site architecture, the availability of the ligand to solvent and the conformation of the ligand and consequent susceptibility to efficient nucleophilic attack. In avidin, the interaction of BNP with Lys111 and disorder of the L3,4 loop (and consequent solvent availability) together comprise the major driving force behind the hydrolysis, whereas in AVR4 the status of the ligand (the pseudo-substrate) is a major distinguishing feature. In the latter protein, a unique conformation of the L3,4 loop restrains the pseudo-substrate, thereby exposing the carbonyl carbon atom to nucleophilic attack. In addition, due to its conformation, the pseudo-substrate in the AVR4 complex cannot interact with the conserved lysine analogue (Lys109); instead, this function is superseded by polar interactions with Arg112. The results demonstrate that, in highly similar proteins, different residues can perform the same function and that subtle differences in the active-site architecture of such proteins can result in alternative modes of reaction.

Dual-affinity avidin molecules.

A recently reported dual-chain avidin was modified further to contain two distinct, independent types of ligand-binding sites within a single polypeptide chain. Chicken avidin is normally a tetrameric glycoprotein that binds water-soluble d-biotin with extreme affinity (K(d) approximately 10(-15) M). Avidin is utilized in various applications and techniques in the life sciences and in the nanosciences. In a recent study, we described a novel avidin monomer-fusion chimera that joins two circularly permuted monomers into a single polypeptide chain. Two of these dual-chain avidins were observed to associate spontaneously to form a dimer equivalent to the wt tetramer. In the present study, we successfully used this scaffold to generate avidins in which the neighboring biotin-binding sites of dual-chain avidin exhibit two different affinities for biotin. In these novel avidins, one of the two binding sites in each polypeptide chain, the pseudodimer, is genetically modified to have lower binding affinity for biotin, whereas the remaining binding site still exhibits the high-affinity characteristic of the wt protein. The pseudotetramer (i.e., a dimer of dual-chain avidins) has two high and two lower affinity biotin-binding sites. The usefulness of these novel proteins was demonstrated by immobilizing dual-affinity avidin with its high-affinity sites. The sites with lower affinity were then used for affinity purification of a biotinylated enzyme. These "dual-affinity" avidin molecules open up wholly new possibilities in avidin-biotin technology, where they may have uses as novel bioseparation tools, carrier proteins, or nanoscale adapters.

High-resolution crystal structure of an avidin-related protein: insight into high-affinity biotin binding and protein stability.

The chicken avidin gene belongs to an extended gene family encoding seven avidin-related genes (AVRs), of which only avidin is expressed in the chicken. The sequences of AVR4 and AVR5 are identical and the common protein (AVR4) has been expressed both in insect and bacterial systems. The recombinant proteins are similarly hyperthermostable and bind biotin with similarly high affinities. AVR4 was crystallized in the apo and biotin-complexed forms and their structures were determined at high resolution. Its tertiary and quaternary structures are very similar to those of avidin and streptavidin. Its biotin-binding site shows only a few alterations compared with those of avidin and streptavidin, which account for the observed differences in binding affinities. The increased hyperthermostability can be attributed to the conformation of the critical L3,4 loop and the extensive network of 1-3 inter-monomeric interactions. The loop contains a tandem Pro-Gly sequence and an Asp-Arg ion pair that collectively induce rigidity, thus maintaining its closed and ordered conformation in both the apo and biotin-complexed forms. In addition, Tyr115 is present on the AVR4 1-3 monomer-monomer interface, which is absent in avidin and streptavidin. The interface tyrosine generates inter-monomeric interactions, i.e. a tyrosine-tyrosine pi-pi interaction and a hydrogen bond with Lys92. The resultant network of interactions confers a larger 1-3 dimer-dimer contact surface on AVR4, which correlates nicely with its higher thermostability compared with avidin and streptavidin. Several of the proposed thermostability-determining factors were found to play a role in strengthening the tertiary and quaternary integrity of AVR4.

Affinity purification of lipid vesicles.

We present a novel column chromatography technique for recovery and purification of lipid vesicles, which can be extended to other macromolecular assemblies. This technique is based on reversible binding of biotinylated lipids to monomeric avidin. Unlike the very strong binding of biotin and biotin-functionalized molecules to streptavidin, the interaction between biotin-functionalized molecules and monomeric avidin can be disrupted effectively by ligand competition from free biotin. In this work, biotin-functionalized lipids (biotin-PEG-PE) were incorporated into synthetic lipid vesicles (DOPC), resulting in unilamellar biotinylated lipid vesicles. The vesicles were bound to immobilized monomeric avidin, washed extensively with buffer, and eluted with a buffer supplemented with free biotin. Increasing the biotinyl lipid molar ratio beyond 0.53% of all lipids did not increase the efficiency of vesicle recovery. A simple adsorption model suggests 1.1 x 10(13) active binding sites/mL of resin with an equilibrium binding constant of K = 1.0 x 10(8) M(-1). We also show that this method is very robust and reproducible and can accommodate vesicles of varying sizes with diverse contents. This method can be scaled up to larger columns and/or high throughput analysis, such as a 96-well plate format.