Influence of Methylene Blue or Dimethyl Sulfoxide on Larval Zebrafish Development and Behavior.

The use of larval zebrafish developmental testing and assessment, specifically larval zebrafish locomotor activity, has been recognized as a higher throughput testing strategy to identify developmentally toxic and neurotoxic chemicals. There are, however, no standardized protocols for this type of assay, which could result in confounding variables being overlooked. Two chemicals commonly employed during early-life stage zebrafish assays, methylene blue (antifungal agent) and dimethyl sulfoxide (DMSO, a commonly used vehicle) have been reported to affect the morphology and behavior of freshwater fish. In this study, we conducted developmental toxicity (morphology) and neurotoxicity (behavior) assessments of commonly employed concentrations for both chemicals (0.6-10.0 µM methylene blue; 0.3%-1.0% v/v DMSO). A light-dark transition behavioral testing paradigm was applied to morphologically normal, 6 days postfertilization (dpf) zebrafish larvae kept at 26°C. Additionally, an acute DMSO challenge was administered based on early-life stage zebrafish assays typically used in this research area. Results from developmental toxicity screens were similar between both chemicals with no morphological abnormalities detected at any of the concentrations tested. However, neurodevelopmental results were mixed between the two chemicals of interest. Methylene blue resulted in no behavioral changes up to the highest concentration tested, 10.0 µM. By contrast, DMSO altered larval behavior following developmental exposure at concentrations as low as 0.5% (v/v) and exhibited differential concentration-response patterns in the light and dark photoperiods. These results indicate that developmental DMSO exposure can affect larval zebrafish locomotor activity at routinely used concentrations in developmental neurotoxicity assessments, whereas methylene blue does not appear to be developmentally or neurodevelopmentally toxic to larval zebrafish at routinely used concentrations. These results also highlight the importance of understanding the influence of experimental conditions on larval zebrafish locomotor activity that may ultimately confound the interpretation of results.

Bacillussp. based nano-bio hybrids for efficient water remediation.

Macroalgae are a diverse group of primary producers that offer indispensable ecosystem services towards bacterial colonization and proliferation in aquatic biomes. Macroalgae/bacteria interactions are complex in natural biomes and contribute mutually to their growth and biotechnological outcomes. Most findings on macroalgae-associated bacteria and their secreted enzymes have largely been limited to nutraceutical applications. Here, in this study, we demonstrate and investigate the growth of Bacillus sp. (macroalgae-associated bacteria) with the substitution of its associated macroalgae (Gracilaria corticata) on graphene oxide (GO). The findings indicated that the presence of wrinkles of GO nanosheets resulted in cell proliferation and adherence without causing mechanical damage to the cell membrane. Furthermore, the assembly of GO-marine bacteria was explored for organic pollutant treatment using methylene blue (MB) as a model dye. The degradation results suggest the breakdown of MB into non-toxic byproducts as suggested by the phytotoxicity assay.

Of masks and methylene blue-The use of methylene blue photochemical treatment to decontaminate surgical masks contaminated with a tenacious small nonenveloped norovirus.

BACKGROUND: In the context of the SARS-CoV-2 pandemic, reuse of personal protective equipment, specifically that of medical face coverings, has been recommended. The reuse of these typically single-use only items necessitates procedures to inactivate contaminating human respiratory and gastrointestinal pathogens. We previously demonstrated decontamination of surgical masks and respirators contaminated with infectious SARS-CoV-2 and various animal coronaviruses via low concentration- and short exposure methylene blue photochemical treatment (10 µM methylene blue, 30 minutes of 12,500-lux red light or 50,000 lux white light exposure). METHODS: Here, we describe the adaptation of this protocol to the decontamination of a more resistant, non-enveloped gastrointestinal virus and demonstrate efficient photodynamic inactivation of murine norovirus, a human norovirus surrogate. RESULTS: Methylene blue photochemical treatment (100 µM methylene blue, 30 minutes of 12,500-lux red light exposure) of murine norovirus-contaminated masks reduced infectious viral titers by over four orders of magnitude on surgical mask surfaces. DISCUSSION AND CONCLUSIONS: Inactivation of a norovirus, the most difficult to inactivate of the respiratory and gastrointestinal human viruses, can predict the inactivation of any less resistant viral mask contaminant. The protocol developed here thus solidifies the position of methylene blue photochemical decontamination as an important tool in the package of practical pandemic preparedness.

Statistical modeling of methylene blue degradation by yeast-bacteria consortium; optimization via agro-industrial waste, immobilization and application in real effluents.

The progress in industrialization everyday life has led to the continuous entry of several anthropogenic compounds, including dyes, into surrounding ecosystem causing arduous concerns for human health and biosphere. Therefore, microbial degradation of dyes is considered an eco-efficient and cost-competitive alternative to physicochemical approaches. These degradative biosystems mainly depend on the utilization of nutritive co-substrates such as yeast extract peptone in conjunction with glucose. Herein, a synergestic interaction between strains of mixed-culture consortium consisting of Rhodotorula sp., Raoultella planticola; and Staphylococcus xylosus was recruited in methylene blue (MB) degradation using agro-industrial waste as an economic and nutritive co-substrate. Via statistical means such as Plackett-Burman design and central composite design, the impact of significant nutritional parameters on MB degradation was screened and optimized. Predictive modeling denoted that complete degradation of MB was achieved within 72 h at MB (200 mg/L), NaNO3 (0.525 gm/L), molasses (385 µL/L), pH (7.5) and inoculum size (18%). Assessment of degradative enzymes revealed that intracellular NADH-reductase and DCIP-reductase were key enzymes controlling degradation process by 104.52 ± 1.75 and 274.04 ± 3.37 IU/min/mg protein after 72 h of incubation. In addition, azoreductase, tyrosinase, laccase, nitrate reductase, MnP and LiP also contributed significantly to MB degradation process. Physicochemical monitoring analysis, namely UV-Visible spectrophotometry and FTIR of MB before treatment and degradation byproducts indicated deterioration of azo bond and demethylation. Moreover, the non-toxic nature of degradation byproducts was confirmed by phytotoxicity and cytotoxicity assays. Chlorella vulgaris retained its photosynthetic capability (˃ 85%) as estimated from Chlorophyll-a/b contents compared to ˃ 30% of MB-solution. However, the viability of Wi-38 and Vero cells was estimated to be 90.67% and 99.67%, respectively, upon exposure to MB-metabolites. Furthermore, an eminent employment of consortium either freely-suspended or immobilized in plain distilled water and optimized slurry in a bioaugmentation process was implemented to treat MB in artificially-contaminated municipal wastewater and industrial effluent. The results showed a corporative interaction between the consortium examined and co-existing microbiota; reflecting its compatibility and adaptability with different microbial niches in different effluents with various physicochemical contents.

When treatment increases the contaminant's ecotoxicity: A study of the Fenton process in the degradation of methylene blue.

The degradation of dyes can generate harmful by-products, thereby requiring the need to evaluate the toxicity to aquatic organisms. This study aims to evaluate the chronic ecotoxicity of methylene blue dye degraded by the Fenton process using the non-target planarian Girardia tigrina as a sensitive bioindicator of environmental contamination. The bioassays evaluated the lethality of several concentrations of the untreated and degraded dye methylene blue (MB), as well as, their sub-lethal effects on locomotion, feeding, regeneration, and reproduction. In both acute and chronic tests, the degraded dye had a stronger toxic effect when compared to the untreated dye. This negative effect after treatment was mainly associated with the presence of residual hydrogen peroxide and iron (and consequently the hydroxyl radical formed). We conclude that the utilization of the Fenton process using less oxidizing agents should be considered as important alternatives for the protection of aquatic ecosystems, without compromising the efficient removal of MB.

Selective Imaging of HClO in the Liver Tissue In Vivo Using a Near-infrared Hepatocyte-specific Fluorescent Probe.

Liver injury is typified by an inflammatory response. Hypochlorous acid (HClO), an important endogenous reactive oxygen species, is regarded as a biomarker associated with liver injury. Near-infrared (NIR) fluorescent probes with the advantage of deep tissue penetrating and low auto-fluorescence interference are more suitable for bioimaging in vivo. Thus, in this work, we designed and synthesized a novel NIR hepatocyte-specific fluorescent probe named NHF. The probe NHF showed fast response (<3 s), large spectral variation, and good selectivity to trace HClO in buffer solution. By employing N-acetylgalactosamine (GalNAc) as the targeting ligand, probe NHF can be actively delivered to the liver tissue of zebrafish and mice. It is important that probe NHF is the first NIR hepatocyte-specific fluorescent probe, which successfully visualized the up-regulation of endogenous HClO in the oxygen-glucose deprivation/reperfusion (OGD/R) model HepG2 cells and dynamically monitored APAP-induced endogenous HClO in the liver tissue of zebrafish and mice.

Acute toxicity of textile dye Methylene blue on growth and metabolism of selected freshwater microalgae.

Microalgae are ecologically important species in aquatic ecosystems due to their role as primary producers. The inhibition of growth of microalgae due to dye pollution results in an upheaval in the trophic transfer of nutrients and energy in aquatic ecosystems. Therefore, this investigation aimed to evaluate the toxicity of a textile dye Methylene blue (MB) on two microalgae viz. Chlorella vulgaris and Spirulina platensis. An exposure of the unialgal populations of both the microalgae towards graded concentrations of the dye showed a concentration-dependent decrease in specific growth rate, pigment and protein content. In the toxicity study of 24 -96-h, following the OECD guidelines 201, the EC50 values of C. vulgaris and S. platensis ranged from 61.81 to 5.43 mg/L and 5.83 to 1.08 mg/L respectively revealing that S. platensis exhibited a higher level of susceptibility towards the dye as compared to C. vulgaris and the latter is more tolerant to the dye toxicity even at higher concentrations. The findings indicate that the response to dye is a species-specific phenomenon. Given the differences in the cell structure and enzymatic pathways in Spirulina platensis (a prokaryote) and Chlorella vulgaris (an eukaryote), the tolerance levels can differ. After 96-h exposure of C. vulgaris to MB (100 mg/L), the chlorophyll-a, b and carotenoid content were reduced 2.5, 5.96 and 3.57 times in comparison to control whereas in S. platensis exposure to MB (10 mg/L), the chlorophyll-a and carotenoid content were reduced 3.59 and 5.08 times in comparison to control. After 96-h exposure of C. vulgaris and S. platensis to the dye (20 mg/L), the protein content was found to be 4.34 and 2.75 times lower than the control. The protein content has decreased in accordance with the increase in dye concentration.

Methylene blue-based 7-nitro-1,2,3-benzoxadiazole NIR fluorescent probe triggered by H2S.

A new Methylene blue-based 7-nitro-1,2,3-benzoxadiazole NIR fluorescent probe 3, 7-bis-dimethylamino-10-(7-nitrobenzo[c][1,2,5]oxadiazol-4-yl)-10H-phenothiazine (leuco-MB-NBD) was designed and synthesized. Leuco-MB-NBD showed high sensitivity and selectivity for H2S as a fluorescent probe in C2H5OH-PBS (9:1, v/v, pH = 7.4) solution, this fluorescent assay showed a linear range of 0-50.0 µM and a LOD (limit of detection) of 0.43 µM. Moreover, the probe leuco-MB-NBD has lower toxicity at low concentrations to HCT-116 cells and can be used for cell imaging. Additionally, Leuco-MB-NBD is triggered by hydrogen sulfide to generate methylene blue, methylene blue which has potential rescuing effects on the mitochondrial activity can act as an antidote against sulfide intoxication.

The photodynamic and direct actions of methylene blue on mitochondrial energy metabolism: A balance of the useful and harmful effects of this photosensitizer.

According to the literature, methylene blue (MB) is a photosensitizer (PS) with a high affinity for mitochondria. Therefore, several studies have explored this feature to evaluate its photodynamic effects on the mitochondrial apoptotic pathway under normoxic conditions. We are aware only of limited reports regarding MB's photodynamic effects on mitochondrial energy metabolism, especially under hypoxic conditions. Thus, the purposes of this study were to determine the direct and photodynamic acute effects of MB on the energy metabolism of rat liver mitochondria under hypoxic conditions and its direct acute effects on several parameters linked to energy metabolism in the isolated perfused rat liver. MB presented a high affinity for mitochondria, irrespective of photostimulation or proton gradient formation. Upon photostimulation, MB demonstrated high in vitro oxidizing species generation ability. Consequently, MB damaged the mitochondrial macromolecules, as could be evidenced by the elevated levels of lipid peroxidation and protein carbonyls. In addition to generating a pro-oxidant environment, MB also led to a deficient antioxidant defence system, as indicated by the reduced glutathione (GSH) depletion. Bioenergetically, MB caused uncoupling of oxidative phosphorylation and led to photodynamic inactivation of complex I, complex II, and F1FO-ATP synthase complex, thus decreasing mitochondrial ATP generation. Contrary to what is expected for an ideal PS, MB displayed appreciable dark toxicity on mitochondrial energy metabolism. The results indicated that MB acted via at least three mechanisms: direct damage to the inner mitochondrial membrane; uncoupling of oxidative phosphorylation; and inhibition of electron transfer. Confirming the impairment of mitochondrial energy metabolism, MB also strongly inhibited mitochondrial ATP production. In the perfused rat liver, MB stimulated oxygen consumption, decreased the ATP/ADP ratio, inhibited gluconeogenesis and ureogenesis, and stimulated glycogenolysis, glycolysis, and ammoniagenesis, fully corroborating its uncoupling action in intact cells, as well. It can be concluded that even under hypoxic conditions, MB is a PS with potential for photodynamic effect-induced mitochondrial dysfunction. However, MB disrupts the mitochondrial energy metabolism even in the dark, causing energy-linked liver metabolic changes that could be harmful in specific circumstances.

Cytotoxic effect and apoptosis pathways activated by methylene blue-mediated photodynamic therapy in fibroblasts.

Antimicrobial photodynamic therapy (aPDT) has been used as an adjuvant treatment of oral infections as a minimal intervention clinical approach. Its antimicrobial efficacy was demonstrated in several studies; however, there is a lack of evidence on its cytotoxic effect on mouse fibroblasts (NIH/3T3). The aim of this study was to evaluate the cytotoxicity and apoptotic pathways of methylene blue-mediated aPDT on mouse fibroblasts. Cells were treated with 0.1 or 1.0 mg.L-1 methylene blue (MB), and 0.075 or 7.5 J.cm-² LED at 630 nm. Cell viability was examined by 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) and crystal violet (CV) assays, while cDNA expression for Bax, Bad, Bcl-2, VDAC-1, cytochrome C and Fas-L was assessed by qRT-PCR (1, 3, 6 and 24 h). The differences between groups were detected by Kruskal-Wallis and post-hoc Dunn's tests for MTT and CV assays, and by ANOVA and post-hoc Tukey test for qPCR (P < 0.05). The combination of 1.0 mg.L-1 MB and 7.5 J.cm-² LED significantly reduced the cellular viability, whereas MB and LED alone were innocuous to fibroblasts. MB-mediated aPDT increased the expression of cytochrome C and Fas-L after 3 h, and Bax/Bcl-2, Bad/Bcl-2, and VDAC-1 after 6 h from treatment. Based on these results, MB-mediated aPDT induced cytotoxicity on mouse fibroblasts, with consequent activation of Bcl-2 apoptosis signaling pathways. Further studies are needed to determine the adequate parameters of aPDT to inactivate microorganisms without damaging fibroblasts.

Copper(II) oxide nanoparticles coated cellulose sponge-an effective heterogeneous catalyst for the reduction of toxic organic dyes.

Discharge of unprocessed coloured waste water from industries gives rise to water contamination. In the current work, we propose the application of CuO nanoparticles supported on cellulose kitchen wipe sponge as a heterogeneous catalyst for the reductive decolourization of various toxic cationic and anionic dye molecules. The catalytic activity of the CuO nanoparticles under normal light for reduction has been examined in which sunlight irradiation is not necessitated. The CuO nanoparticles were synthesized by a simple wet chemical method and characterized using High Resolution Transmission Electron Microscope (HRTEM), SEM, EDX, XRD, XPS and TGA analyses. In the presence of CuO@CS catalyst and sodium borohydride, decolourization reaction of dyes such as acid red, acid green, methylene blue, rhodamine B and solochrome black-T was carried out. The catalytic reduction behaves as a pseudo-first-order reaction and is found to be superior in comparison with other reported catalysts in terms of reaction velocity. The reduction reaction can be further accelerated by increasing the reaction temperature. The developed catalyst drives the reduction faster on exposing the reaction mixture to sunlight confirming the usage of the catalyst at normal light and sunlight conditions. The catalyst retains 100% efficiency even after 5 cycles and remains suitable even for further use. Thus, a low-cost heterogeneous catalyst has been successfully developed and employed to decolourize various dye molecules in short duration with good recyclability and therefore can be used as the potential candidate in environmental remediation.

Toxicity Effects of Methylene Blue on Rat Intervertebral Disc Annulus Fibrosus Cells.

BACKGROUND: There is an increasing local application of methylene blue (MB) in the treatment of discogenic low back pain (LBP) and percutaneous transforaminal endoscopic discectomy (PTED) procedures. MB could generate DNA damage and induce apoptosis in different cell types; however, the effects of MB on intervertebral disc (IVD) annulus fibrosus (AF) cells are not clearly understood. OBJECTIVE: The objective of this study was to investigate the effects of different concentrations of MB on rat AF cells in vitro. STUDY DESIGN: This study used an experimental design. SETTING: This research was conducted at the Orthopaedic Institute of the Clinical Medical College of Yangzhou University. METHODS: AF cells were isolated and cultured with different concentrations of MB (0, 2, 20, and 200 mu-g/mL) and assessed to determine the possible cytotoxic effects of MB. The cell proliferation was detected by Cell Counting Kit-8 (CCK-8) assay. The inverted phase-contrast microscopy was used to perform morphological observation of apoptotic cells, and flow cytometry was used to measure the incidence of cell apoptosis. The mRNA and protein expression levels of apoptosis-associated genes (caspase-3, Bcl-2, and Bax) and other related genes (collagen type I, transforming growth factor beta1 [TGF-beta1], fibroblast growth factor [bFGF], and tissue inhibitor of metalloproteinase-1 [TIMP-1]) were analyzed by quantitative real-time PCR (RT-PCR) and Western blotting. RESULTS: Our results indicated that MB reduced cell viability in a concentration- and time-dependent manner. MB also induced marked AF cell apoptosis in a concentration-dependent manner observed by inverted phase-contrast microscopy, flow cytometry, and indicated by the increased expression of caspase-3. Both RT-PCR and Western blotting revealed significant up-regulation of Bax and caspase-3 expression levels accompanied by decreased expression of Bcl-2 in a concentration-dependent manner. Moreover, collagen type I, TGF-beta1, bFGF, and TIMP-1 mRNA and protein levels were also found to be decreased by MB in a concentration-dependent manner. LIMITATIONS: Limitations of this study were the in vitro study design and lack of in vivo validation of the observed effects of MB on human IVD cells. CONCLUSIONS: Our results indicate that a high concentration of MB can not only inhibit proliferation and paracrine function of AF cells, but can also induce cell apoptosis in a concentration-dependent manner, suggesting that it is necessary to choose low concentrations of MB in practical application and limit the use of MB in the treatment of discogenic LBP to research protocols. KEY WORDS: Methylene blue, annulus fibrosus cell, proliferation, apoptosis, paracrine.

Investigation of the in vitro cytotoxic effects and wound healing activity of ternary composite substance (hollow silica sphere/gum arabic/methylene blue).

We aimed to test the adsorption of the methylene blue (MB) on HSEPCGUM as a dye and also to test the obtained ternary biocomposite substance (HSEPCGUM-MB) on wound healing. Hollow silica spheres (HSS) are used in the pharmaceutical and biochemical field, because of low toxic, highly biocompatible and mechanically stable by large surface areas. HSS was obtained by mechanochemistry method. The obtained HSS was treated with epichlorohydrin to carry out an epoxidation process (HSEPC). Then, HSEPC was functionalized by treatment with gum arabic (HSEPCGUM). MB was adsorbed onto HSEPCGUM and the adsorption maximum capacity of HSEPCGUM (Xmax) was obtained 333 mg g-1. For in vitro studies, according to the cytotoxicity test results, ternary biocomposite substance (HSEPCGUM-MB) was studied at non-cytotoxic concentrations 10, 50 and 100 µg/ml and wound closure was found as 55% (100 µg/ml) as compared to control.

Kinetics, thermodynamics, equilibrium isotherms, and reusability studies of cationic dye adsorption by magnetic alginate/oxidized multiwalled carbon nanotubes composites.

Magnetic beads (AO-γ-Fe2O3) of alginate (A) impregnated with citrate coated maghemite nanoparticles (γ-Fe2O3) and oxidized multiwalled carbon nanotubes (OMWCNTs) were synthesized and used as adsorbent for the removal of methylene blue from water. The XRD analysis revealed that the diameter of γ-Fe2O3 is 10.24 nm. The mass saturation magnetization of AO-γ-Fe2O3 and γ-Fe2O3 were found to be 27.16 and 42.63 emu·g-1, respectively. The adsorption studies revealed that the data of MB isotherm were well fitted to the Freundlich model. The Langmuir isotherm model exhibited a maximum adsorption capacity of 905.5 mg·g-1. The adsorption was very dependent on initial concentration, adsorbent dose, and temperature. The beads exhibited high adsorption stability in large domain of pH (4-10). The thermodynamic parameters determined at 283, 293, 303, and 313 K revealed that the adsorption occurring was spontaneous and endothermic in nature. Adsorption kinetic data followed the intraparticle diffusion model. The AO-γ-Fe2O3 beads were used for six cycles without significant adsorptive performance loss. Therefore, the eco-friendly prepared AO-γ-Fe2O3 beads were considered as highly recyclable and efficient adsorbent for methylene blue as they can be easily separated from water after treatment.

Preparation of the Sodium Alginate-g-(Polyacrylic Acid-co-Allyltrimethylammonium Chloride) Polyampholytic Superabsorbent Polymer and Its Dye Adsorption Property.

A polyampholytic superabsorbent polymer (PASAP), sodium alginate-g-(polyacrylic acid-co-allyltrimethylammonium chloride) (SA-g-(PAA-co-PTM)), was prepared by free-radical graft copolymerization and characterized. The polymer exhibited pH-dependent swelling behaviors with extremely high swelling ratios, and was saline tolerant. The dye adsorption properties of SA-g-(PAA-co-PTM) were investigated using methylene blue (MB) as a cationic dye model. It was found that its dye adsorption capacity was significantly affected by the TM content in PASAP and pH of dye solution. The dye adsorption kinetics and isotherm obey the pseudo-second-order kinetic model and the Langmuir isotherm model, respectively, and the adsorption process is chemisorption in nature. In addition, SA-g-(PAA-co-PTM) exhibited high MB adsorption capacities in a wide pH range and reusability in at least five adsorption-desorption cycles, indicating its great application potentials as the adsorbent for dye removals from effluents.

Sericin-derived activated carbon-loaded alginate bead: An effective and recyclable natural polymer-based adsorbent for methylene blue removal.

Activated carbon has been widely used as an effective adsorbent for removing contaminants from the water stream. Preparation of activated carbon using agricultural by-products is environmentally friendly and can greatly contribute to the virtuous cycle of natural polymers. In this study, highly porous activated carbon was prepared using silk sericin, a secondary protein of the sericulture industry. For easy processability and regeneration stability, the bead-type adsorbent was prepared using alginate (Alg) as a matrix. After that, methylene blue (MB) removal behavior of sericin-derived activated carbon (S-AC)/Alg beads was investigated. S-AC obtained by NaOH chemical activation had a larger BET surface area (2150.1 m2/g), and this porous structure of S-AC was well maintained after S-AC/Alg bead preparation (1215.4 m2/g). S-AC/Alg beads had an excellent MB adsorption capacity (502.5 mg/g) with stable regeneration stability, and 90.1% of the original removal efficiency was maintained after 5 cycles of the repeated adsorption-desorption process. These findings reveal that S-AC/Alg composite beads can be used as low-cost adsorbents for the removal of contaminants in aqueous solutions.

Photosensitizer-Conjugated Bi2Te3 Nanosheets as Theranostic Agent for Synergistic Photothermal and Photodynamic Therapy.

Phototherapy, including photothermal therapy (PTT)/photodynamic therapy (PDT), is usually considered as a promising strategy for cancer treatment due to its noninvasive and selective therapeutic effect by laser irradiation. A light-activatable nanoplatform based on bovine serum albumin (BSA)-coated Bi2Te3 nanosheets conjugated with methylene blue (MB) was successfully designed and constructed for bimodal PTT/PDT combination therapy. The resultant nanoconstruct (BSA-Bi2Te3/MB) exhibited high stability in various physiological solutions and excellent biocompatibility. Especially, the nanoconstruct not only possessed strong near-infrared absorption and high photothermal conversion as a photothermal agent for efficient tumor ablation but also could successfully load photosensitizer for PDT of tumor. When exposed to laser irradiation, tumors in mice with BSA-Bi2Te3/MB injection were completely eliminated without recurrence within 15 d, demonstrating the potential of the nanoconstruct as a bimodal PTT/PDT therapeutic platform for cancer treatment.

Pectin microgel particles as high adsorption rate material for methylene blue: Performance, equilibrium, kinetic, mechanism and regeneration studies.

The pectin gel has been proved to be an effective material for methylene blue (MB) removal, but it presented low adsorption rate. To get over the vice, the pectin microgel particles (PMP) was prepared. No matter high or low initial MB concentration, the PMP presented high adsorption rate with equilibrium time of 20min. The adsorption process based on monolayer adsorption and adsorbance of 284.09mg/g was obtained. What's more, the adsorption process was electrostatic adsorption with mean free energy of 74.223kJ/mol. The pseudo-second-order kinetic model fitted perfectly to the experimental data. The MB uptake was controlled by film diffusion mechanism. Furthermore, the recovery efficiency of regenerated PMP were higher than 80% after three cycles. The present study showed the PMP presented acceptable adsorbance, high adsorption rate and recovery efficiency. Thus, we believe that the PMP was a promising candidate for MB cleanup.

Preparation of CMC-g-P(SPMA) super adsorbent hydrogels: Exploring their capacity for MB removal from waste water.

A novel superadsorbent anionic hydrogel was synthesized by grafting of poly (3-sulfopropyl methacrylate), P(SPMA), onto carboxymethyl cellulose (CMC). CMC-g-P(SPMA) superadsorbent hydrogel was applied as an efficient and sustainable adsorbent to remove methylene blue (MB) from waste water. Batch adsorption experiments showed that the solution pH had an obvious effect on the adsorption capacity with an optimal sorption pH at 6. The CMC-g-P(SPMA) hydrogel had rapid adsorption kinetics for MB and the adsorption equilibrium reached within 40min. The adsorption kinetics were more accurately described by pseudo second-order model and the Langmuir-fitted adsorption isotherms revealed a maximum capacity of 1675mg/g. The current anionic hydrogel is reusable as the adsorption capacity remained at 89% level after five adsorption-desorption cycles. CMC-g-P(SPMA) hydrogel was presented as a sustainable promising adsorbent with high adsorption capacity and good regenerability for effective cationic dyes removal.