Experimental validation of the accuracy of robotic-assisted radioactive seed implantation for tumor treatment.

An experimental validation of a robotic system for radioactive iodine-125 seed implantation (RISI) in tumor treatment was conducted using customized phantom models and animal models simulating liver and lung lesions. The robotic system, consisting of planning, navigation, and implantation modules, was employed to implant dummy radioactive seeds into the models. Fiducial markers were used for target localization. In phantom experiments across 40 cases, the mean errors between planned and actual seed positions were 0.98 ± 1.05 mm, 1.14 ± 0.62 mm, and 0.90 ± 1.05 mm in the x, y, and z directions, respectively. The x, y, and z directions correspond to the left-right, anterior-posterior, and superior-inferior anatomical planes. Silicone phantoms exhibiting significantly smaller x-axis errors compared to liver and lung phantoms (p < 0.05). Template assistance significantly reduced errors in all axes (p < 0.05). No significant dosimetric deviations were observed in parameters such as D90, V100, and V150 between plans and post-implant doses (p > 0.05). In animal experiments across 23 liver and lung cases, the mean implantation errors were 1.28 ± 0.77 mm, 1.66 ± 0.69 mm, and 1.86 ± 0.93 mm in the x, y, and z directions, slightly higher than in phantoms (p < 0.05), with no significant differences between liver and lung models. The dosimetric results closely matched planned values, confirming the accuracy of the robotic system for RISI, offering new possibilities in clinical tumor treatment.

Comparison of failure modes and effects analyses and time for brachytherapy ring and tandem applicator digitization between manual and solid applicator source placement methods.

PURPOSE: Ring and tandem (R&T) applicator digitization is currently performed at our institution by manually defining the extent of the applicators. Digitization can also be achieved using solid applicators: predefined, 3D models with geometric constraints. This study compares R&T digitization using manual and solid applicator methods through Failure Modes and Effects Analyses (FMEAs) and comparative time studies. We aim to assess the suitability of solid applicator method implementation for R&T cases METHODS: Six qualified medical physicists (QMPs) and two medical physics residents scored potential modes of failure of manual digitization in an FMEA as recommended by TG-100. Occurrence, severity, and detectability (OSD) values were averaged across respondents and then multiplied to form combined Risk Priority Numbers (RPNs) for analysis. Participants were trained to perform treatment planning using a developed solid applicator protocol and asked to score a second FMEA on the distinct process steps from the manual method. For both methods, participant digitization was timed. FMEA and time data were analyzed across methods and participant samples RESULTS: QMPs rated the RPNs of the current, manual method of digitization statistically lower than residents did. When comparing the unique FMEA steps between the two digitization methods, QMP respondents found no significant difference in RPN means. Residents, however, rated the solid applicator method as higher risk. Further, after the solid applicator method was performed twice by participants, the time to digitize plans was not significantly different from manual digitization CONCLUSIONS: This study indicates the non-inferiority of the solid applicator method to manual digitization in terms of risk, according to QMPs, and time, across all participants. Differences were found in FMEA evaluation and solid applicator technique adoption based on years of brachytherapy experience. Further practice with the solid applicator protocol is recommended because familiarity is expected to lower FMEA occurrence ratings and further reduce digitization times.

Long-term results of intraoperative multicatheter breast implant (IOMBI) for accelerated partial breast irradiation (APBI) on early breast cancer patients.

BACKGROUND AND PURPOSE: Multicatheter breast brachytherapy is a standard technique for accelerated partial breast irradiation (APBI) in early breast cancer patients. Intraoperative multicatheter breast implant (IOMBI) followed by perioperative high-dose-rate brachytherapy (PHDRBT) offers a novel and advantageous approach. We present long-term oncological, toxicity, and cosmesis outcomes for a well-experienced single institution. MATERIALS AND METHODS: Eligible women aged ≥ 40 years with clinically and radiologically confirmed unifocal invasive or in situ ≤ 3 cm breast tumors underwent IOMBI during breast-conserving surgery. Patients meeting APBI criteria by definitive pathologic results received 3.4 Gy × 10fx with PHDRBT. Patients not suitable for APBI received PHDRBT-boost followed by WBRT. RESULTS: A total of 171 patients underwent IOMBI during BCS, 120 patients (70.1 %) were suitable for APBI and 51 (29.8 %) for anticipated PHDRBT-boost. The median age was 61 years (range: 40-78), the median tumor size was 1.1 cm (range: 0.2-3.5), with a histological diagnosis of invasive ductal carcinoma in 78.9 % and ductal in situ in 21.1 %. A median of 9 catheters (range: 4-14) were used. For APBI, the median CTV and V100 were 40.8 cc (range: 8.6-99) and 35.4 cc (range: 7.2-94). The median of healthy breast tissue irradiated represents 7.2 % (range: 2.3-28 %) and the median local treatment duration was 10 days (range: 7-16). With a median follow-up of 8.8 years (range: 0.3-16.25), the 8-year local, locoregional, and distant control rates were 99 %, 98.1 %, and 100 %. G1-G2 late-toxicity rate was 53.4 %. Long-term cosmetic evaluation was excellent-good in 90.8 %. CONCLUSION: IOMBI&PHDRBT program reports excellent long-term oncological outcomes, with a reduction from unnecessary irradiation exposure which translates into low long-term toxicity and good cosmesis outcomes, especially on well-selected APBI patients.

Prospective validation of a machine learning model for applicator and hybrid interstitial needle selection in high-dose-rate (HDR) cervical brachytherapy.

PURPOSE: To Demonstrate the clinical validation of a machine learning (ML) model for applicator and interstitial needle prediction in gynecologic brachytherapy through a prospective clinical study in a single institution. METHODS: The study included cervical cancer patients receiving high-dose-rate brachytherapy using intracavitary (IC) or hybrid interstitial (IC/IS) applicators. For each patient, the primary radiation oncologist contoured the high-risk clinical target volume on a pre-brachytherapy MRI, indicated the approximate applicator location, and made a clinical determination of the first fraction applicator. A pre-trained ML model predicted the applicator and IC/IS needle arrangement using tumor geometry. Following the first fraction, ML and radiation oncologist predictions were compared and a replanning study determined the applicator providing optimal organ-at-risk (OAR) dosimetry. The ML-predicted applicator and needle arrangement and the clinical determination were compared to this dosimetric ground truth. RESULTS: Ten patients were accrued from December 2020 to October 2022. Compared to the dosimetrically optimal applicator, both the radiation oncologist and ML had an accuracy of 70%. ML demonstrated better identification of patients requiring IC/IS applicators and provided balanced IC and IC/IS predictions. The needle selection model achieved an average accuracy of 82.5%. ML-predicted needle arrangements matched or improved plan quality when compared to clinically selected arrangements. Overall, ML predictions led to an average total improvement of 2.0 Gy to OAR doses over three treatment fractions when compared to clinical predictions. CONCLUSION: In the context of a single institution study, the presented ML model demonstrates valuable decision-support for the applicator and needle selection process with the potential to provide improved dosimetry. Future work will include a multi-center study to assess generalizability.

A comprehensive quality assurance protocol for electromagnetic tracking in brachytherapy.

BACKGROUND: Electromagnetic tracking (EMT) systems have proven to be a valuable source of information regarding the location and geometry of applicators in patients undergoing brachytherapy (BT). As an important element of an enhanced and individualized pre-treatment verification, EMT can play a pivotal role in detecting treatment errors and uncertainties to increase patient safety. PURPOSE: The purpose of this study is two-fold: to design, develop and test a dedicated measurement protocol for the use of EMT-enabled afterloaders in BT and to collect and compare the data acquired from three different radiation oncology centers in different clinical environments. METHODS: A novel quality assurance (QA) phantom composed of a scaffold with supports to fix the field generator, different BT applicators, and reference sensors (sensor verification tools) was used to assess the precision (jitter error) and accuracy (relative distance errors and target registration error) of the EMT sensor integrated into an afterloader prototype. Measurements were repeated in different environments where EMT measurements are likely to be performed, namely an electromagnetically clean laboratory, a BT suite, an operating room, and, if available, a CT suite and an MRI suite dedicated to BT. RESULTS: The mean positional jitter was consistently under 0.1 mm across all measurement points, with a slight trend of increased jitter at greater distances from the field generator. The mean variability of sensor positioning in the tested tandem and ring gynecological applicator was also below 0.1 mm. The tracking accuracy close to the center of the measurement volume was higher than at its edges. The relative distance error at the center was 0.2-0.3 mm with maximum values reaching 1.2-1.8 mm, but up to 5.5 mm for measurement points close to the edges. In general, similar accuracy results were obtained in the clinical environments and in all investigated institutions (median distance error 0.1-0.4 mm, maximum error 1.0-2.0 mm), however, errors were found to be larger in the CT suite (median distance error up to 1.0 mm, maximum error up to 3.6 mm). CONCLUSION: The presented quality assessment protocol for EMT systems in BT has demonstrated that EMT offers a high-accuracy determination of the applicator/implant geometry even in clinical environments. In addition to that, it has provided valuable insights into the performance of EMT-enabled afterloaders across different radiation oncology centers.

Design approach and benefits of the 3D-printed vaginal individualized applicator (VIA).

PURPOSE: Interstitial gynecologic brachytherapy necessitates precise needle placement, requiring time and expertise. We aimed to simplify interstitial procedures and facilitate optimal needle distribution with individualized vaginal templates to guide interstitial needles. MATERIALS/METHODS: We developed the 3D-printed vaginal individualized applicator (VIA), a cylindrical template containing individualized internal channels that guide interstitial needles to cover the tumor extent. Eight patients underwent VIA only interstitial implants (VIA only), and five intact cervical cases were treated using tandem and customized VIA (VIA + T). Procedure length, number of needles utilized and dosimetric measures were evaluated. RESULTS: VIA was successfully designed and used clinically for 24 procedures (8 VIA only, 16 VIA + T). Average procedure needle insertion time reduced from 80.9 min for traditional interstitial to 42.9 min for VIA only, approximately 47% shorter with a similar mean high risk CTV volume (28.3 cc VIA only vs. 32.4 cc) and excellent dosimetry with average CTV V100% (94.3% and 94.4%). VIA + T was particularly useful in patients with small vaginal canals and large tumor size. For the five VIA + T patients average tumor size was 68.0cc (range 26.6-143.5 cc). VIA + T procedures were approximately 20% shorter than hybrid procedures with other applicators with mean length of 20.1 min and an average of 6.8 needles (range 3-12). CONCLUSION: Our novel 3D-printed VIA facilitates gynecologic interstitial brachytherapy by simplifying needle placement, reducing procedure time, and maintaining excellent dosimetry. VIA can be customized for various clinical scenarios, particularly beneficial for large tumors or small vaginal canals.

Multibody dynamic modeling of the behavior of flexible instruments used in cervical cancer brachytherapy.

BACKGROUND: The steep radiation dose gradients in cervical cancer brachytherapy (BT) necessitate a thorough understanding of the behavior of afterloader source cables or needles in the curved channels of (patient-tailored) applicators. PURPOSE: The purpose of this study is to develop and validate computer models to simulate: (1) BT source positions, and (2) insertion forces of needles in curved applicator channels. The methodology presented can be used to improve the knowledge of instrument behavior in current applicators and aid the development of novel (3D-printed) BT applicators. METHODS: For the computer models, BT instruments were discretized in finite elements. Simulations were performed in SPACAR by formulating nodal contact force and motion input models and specifying the instruments' kinematic and dynamic properties. To evaluate the source cable model, simulated source paths in ring applicators were compared with manufacturer-measured source paths. The impact of discrepancies on the dosimetry was estimated for standard plans. To validate needle models, simulated needle insertion forces in curved channels with varying curvature, torsion, and clearance, were compared with force measurements in dedicated 3D-printed templates. RESULTS: Comparison of simulated with manufacturer-measured source positions showed 0.5-1.2 mm median and <2.0 mm maximum differences, in all but one applicator geometry. The resulting maximum relative dose differences at the lateral surface and at 5 mm depth were 5.5% and 4.7%, respectively. Simulated insertion forces for BT needles in curved channels accurately resembled the forces experimentally obtained by including experimental uncertainties in the simulation. CONCLUSION: The models developed can accurately predict source positions and insertion forces in BT applicators. Insights from these models can aid novel applicator design with improved motion and force transmission of BT instruments, and contribute to the estimation of overall treatment precision. The methodology presented can be extended to study other applicator geometries, flexible instruments, and afterloading systems.

High-dose-rate plesiotherapy with customized molds in non-melanoma skin cancer: efficacy and safety at 10 years—single institution experience

PurposeOur center adopted high-dose-rate brachytherapy with surface applicators (plesiotherapy) in 2008, creating custom molds to treat irregular areas. This study describes the efficacy and safety outcomes after extensive follow-up in the patients.Methods/patientsWe planned the treatment using two computed tomography (CT) scans: the first to delineate the lesion and the second after placing the thermoplastic mold. Fusing the two CT images enables planning of the target volume and pinpointing, where the catheters are in the mold.ResultsSeventy patients received plesiotherapy, either exclusively or following excision in patients with risk factors for recurrence. Those receiving plesiotherapy alone showed a complete response rate of 95.8%, and recurrences occurred in 5.7% at a mean follow-up of 96.2 months. Chronic toxicity appeared in 26.6% of patients, but severity was limited to grade 1 or 2.ConclusionsHigh-dose-rate brachytherapy with customized molds yields a high rate of complete response, with long-term recurrence rates in line with similar studies and an acceptable toxicity rate.

High-dose-rate plesiotherapy with customized molds in non-melanoma skin cancer: efficacy and safety at 10 years-single institution experience.

PURPOSE: Our center adopted high-dose-rate brachytherapy with surface applicators (plesiotherapy) in 2008, creating custom molds to treat irregular areas. This study describes the efficacy and safety outcomes after extensive follow-up in the patients. METHODS/PATIENTS: We planned the treatment using two computed tomography (CT) scans: the first to delineate the lesion and the second after placing the thermoplastic mold. Fusing the two CT images enables planning of the target volume and pinpointing, where the catheters are in the mold. RESULTS: Seventy patients received plesiotherapy, either exclusively or following excision in patients with risk factors for recurrence. Those receiving plesiotherapy alone showed a complete response rate of 95.8%, and recurrences occurred in 5.7% at a mean follow-up of 96.2 months. Chronic toxicity appeared in 26.6% of patients, but severity was limited to grade 1 or 2. CONCLUSIONS: High-dose-rate brachytherapy with customized molds yields a high rate of complete response, with long-term recurrence rates in line with similar studies and an acceptable toxicity rate.

Comparison between Accelerated Partial Breast Irradiation with multicatheter interstitial brachytherapy and Whole Breast Irradiation, in clinical practice.

PURPOSE: The aim of this study was to compare accelerated partial breast irradiation (APBI) with multicatheter interstitial brachytherapy (BT) and whole breast irradiation (WBI), in terms of toxicity, aesthetic result, quality of life and survival, in clinical practice. MATERIALS AND METHODS: A comparative study of two prospectively recorded cohorts of 76 breast cancer patients who complied with the recommendations of GEC-ESTRO for APBI was conducted. The main objective was toxicity, quality of life measured through validated questionnaires and the aesthetic results. Secondary objectives were overall survival and disease-free survival. RESULTS: Seventy-six stage I/II breast cancer patients, with a mean age of 66 years entered the study. APBI group showed less acute G1-2 dermatitis (51.4 vs 94.9%, p < 0.001) and late hyperpigmentation (0 vs 17.9%, p = 0.04). There were no differences in aesthetic results, both assessed by the patient herself and by the doctor. Statistically significant differences in measures of quality of life were observed in favour of the APBI, both in EORTC QLQ-BR23 and body image scale questionnaires. With a median follow-up of 72 months (6 years), the estimated overall survival at 5 and 10 years was 96.8 and 77.7%, respectively, and disease-free survival at 5 and 10 years was 91.1 and 69.4%, respectively, without statistically significant differences between groups. DISCUSSION: APBI is an attractive alternative in candidate patients with initial breast cancer, with benefits in acute toxicity and quality of life and fewer visits to the hospital, without compromising tumor control or survival.

Axially rigid steerable needle with compliant active tip control.

Steerable instruments allow for precise access to deeply-seated targets while sparing sensitive tissues and avoiding anatomical structures. In this study we present a novel omnidirectional steerable instrument for prostate high-dose-rate (HDR) brachytherapy (BT). The instrument utilizes a needle with internal compliant mechanism, which enables distal tip steering through proximal instrument bending while retaining high axial and flexural rigidity. Finite element analysis evaluated the design and the prototype was validated in experiments involving tissue simulants and ex-vivo bovine tissue. Ultrasound (US) images were used to provide visualization and shape-reconstruction of the instrument during the insertions. In the experiments lateral tip steering up to 20 mm was found. Manually controlled active needle tip steering in inhomogeneous tissue simulants and ex-vivo tissue resulted in mean targeting errors of 1.4 mm and 2 mm in 3D position, respectively. The experiments show that steering response of the instrument is history-independent. The results indicate that the endpoint accuracy of the steerable instrument is similar to that of the conventional rigid HDR BT needle while adding the ability to steer along curved paths. Due to the design of the steerable needle sufficient axial and flexural rigidity is preserved to enable puncturing and path control within various heterogeneous tissues. The developed instrument has the potential to overcome problems currently unavoidable with conventional instruments, such as pubic arch interference in HDR BT, without major changes to the clinical workflow.

New model for an epoxy-based brachytherapy source to be used in spinal cancer treatment.

The present work described the cold fabrication of a P-32 radioactive source to be used in CNS cancer using epoxy resin. The epoxy plaque fabricated with Teflon mold presented better agreement. MCNP simulation evaluated the radiation dose. Special attention was given to factors that can impact dose distribution. Average dose was 16.44 ± 2.89% cGy/s. Differences of less than 0.01 cm in thickness within the plaque lead to differences of up to 12% in the dose rate.

Brachytherapy with Iodine-125 seeds for treatment of portal vein-branch tumor thrombus in patients with hepatocellular carcinoma.

BACKGROUND: There is currently no widely-accepted consensus for the management of hepatocellular carcinoma with portal vein tumor thrombus. We evaluate the safety and efficacy of ultrasound-guided percutaneous brachytherapy with iodine-125 seeds for the treatment of hepatocellular carcinoma with portal vein-branch tumor thrombus (PVBTT). METHODS: Sixty-nine hepatocellular carcinoma patients with PVBTT were enrolled; 34 received transarterial chemoembolization (TACE) combined with iodine-125 seeds implanted in the PVBTT; 35 were treated with TACE alone. Adverse events, objective response rate, disease control rate, progression-free survival, and overall survival were compared between the two groups. Tumor responses of PVBTT and intrahepatic tumor were correlated. Multivariate and subgroup analyses were conducted for overall survival. RESULTS: No grade 3 or 4 adverse events were recorded, and there was no difference in grade 1 or 2 adverse events between the two groups. Objective response rate and disease control rate for PVBTT were 58.9 and 91.2%, respectively, in the combined treatment group, which were significantly greater than the 5.7 and 54.3% rates, respectively, in the TACE-alone group (both p's ≤ 0.001). Intrahepatic tumor response was positively correlated with the PVBTT response (γ = 0.782, p < 0.01). Survival outcomes were better in the combined treatment group than in the TACE-alone group: the median progression-free survival for PVBTT was 9 months versus 3 months (HR = 0.187 [95% CI: 0.101, 0.345], p < 0.001), and the median overall survival was 11 months versus 7 months (HR = 0.448 [95% CI: 0.265, 0.758], p = 0.003). Multivariate analysis revealed that application of brachytherapy and lower grade PVBTT (Vp1 + Vp2 vs. Vp3) were protective predictors of overall survival. In stratified analysis, the benefit of overall survival was more significant in the subgroup of PVBTT Vp1 + Vp2 rather than in Vp3. CONCLUSIONS: The combination of iodine-125 seed brachytherapy guided by ultrasound and TACE is a convenient, safe, and effective treatment for patients with HCC and PVBTT, conferring a better survival benefit than TACE alone.

Analysis on the accuracy of CT-guided radioactive I-125 seed implantation with 3D printing template assistance in the treatment of thoracic malignant tumors.

This article analyzes the accuracy of needle track and dose of a 3-dimensional printing template (3DPT) in the treatment of thoracic tumor with radioactive I-125 seed implantation (RISI). A total of 28 patients were included. The technical process included: (i) preoperative CT positioning, (ii) preoperative planning design, (iii) 3DPT design and printing, (iv) 3DPT alignment, (v) puncture and seed implantation. The errors of needle position and dosimetric parameters were analyzed. A total of 318 needles were used. The mean errors in needle depth, needle insertion point, needle tip and needle angle were 0.52 ± 0.48 cm, 3.4 ± 1.7 mm, 4.4 ± 2.9 mm and 2.8 ± 1.7°, respectively. The differences between actual needle insertion angle and needle depth and those designed in the preoperative were statistically significant (p < 0.05). The mean values of all the errors of the chest wall cases were smaller than those of the lungs, and the differences were statistically significant (p < 0.05). There was no significant difference between the D90 calculated in the postoperative plan and those designed in the preoperative and intraoperative plans (p > 0.05). Some dosimetric parameters of preoperative plans such as V100, V200, CI and HI were not consistent with that of preoperative plans, and the difference was statistically significant (p < 0.05). However, there were no statistical difference in the dosimetric parameters between the postoperative plans and intraoperative plans (p > 0.05). We conclude that for thoracic tumors, even under the guidance of 3DPT, there will be errors. The plan should be optimized in real time during the operation.

[Source blocking in HDR brachytherapy: Practical situation and experience feedback at the Eugène Marquis-Rennes]. / Blocage de source en curiethérapie de haut débit de dose : mise en situation pratique et retour d'expérience au centre Eugène Marquis- Rennes.

At the Eugene Marquis Center, high dose rate brachytherapy is part of the care offering. The risk analysis and the national experience feedback linked to the use of high activity sources show that blocking the source outside its storage position, during treatment, would be the main risk of exposure of ionizing radiation. In a process of radiation protection of patients and workers, and to limit the consequences of such an accident, the Eugene Marquis Center has set up periodic training with practical experience for all brachytherapy professionals. This article describes the experience feedback from this training by brachytherapy technicians.

Consensus and recommendations on vaginal-cuff Brachytherapy of the Spanish Brachytherapy Groups of SEOR and SEFM

Purpose/objective(s) On October 5, 2018, a meeting of the Spanish Society of Radiation Oncology (SEOR) Brachytherapy Group was held, in collaboration with the Spanish Society of Medical Physics (SEFM), with the aim of preparing a consensus document on postoperative vaginal-cuff brachytherapy (VCBT). Materials/methods A survey including 42 questions was sent to Spanish Radiation Oncology Centres before the meeting. The survey items included: experience in VCBT, technique indications, previous patient preparation, applicator type, implant procedure, computerized tomography (CT) simulation, definition of target volumes and organs at risk (OAR), dose prescription, fractionation, treatment planning, dosimetric parameters and constraints to OAR. Thirty-three centres answered the survey. Statistical analysis of the survey considered that there was consensus when there was ≥ 85% of agreement related to a survey item, otherwise an item with < 85% of agreement would be discussed during the meeting to reach consensus. Results The results of the survey are reported here. The mean number of patients treated per centre in 2017 was 52 ± 41 (range 7–175), and the mean number of procedures per centre was 175 ± 150 (range 24–701).There was consensus on: the indications, applicator type, the OAR to be considered, the prescription point, standardisation and dosimetric quality parameters. There was no consensus on: patient preparation for the implant, the need for performing CT simulation and the frequency, the length of the vagina to be treated, if CTV should be delimited, the definition of the clinical target volume, fractionation, overall EQD2, active source length, separation between dwelling stepping source positions, if considering the uniformity/maximum values for dwelling stepping sources, the optimization mode, and the limiting doses to the OAR (AU)

Contact X-ray brachytherapy for rectal cancer: Past, present, and future.

The Papillon experience and the Lyon R96-02 trial have shown that contact X-ray brachytherapy of 50kV is efficient and safe to achieve long term local control and organ preservation for cT1 and early cT2-3 rectal cancers. The OPERA trial, using the Papillon 50™ machine, brings further support to this preservation strategy for selected T2T3ab lesions. Future trials using a contact X-ray boost will try to consolidate and enlarge its place in organ preservation for rectal cancers.

Dosimetric comparison of volumetric modulated arc therapy (VMAT) and high-dose-rate brachytherapy (HDR-BT) for superficial skin irradiation with significant curvature in one or more planes.

PURPOSE: This study compares the plan quality of high-dose-rate brachytherapy (HDR-BT) and volumetric modulated arc therapy (VMAT) for superficial irradiation of large areas of skin with significant curvature in one or more planes. METHODS: A total of 14 patients from two centres previously treated with either HDR-BT or VMAT were retrospectively replanned using the alternative technique. Sites included scalp and lower limbs. Identical computed tomography (CT) scans, clinical target volume (CTV) and organs at risk (OARs) and prescription were used for both techniques. Conformity, skin surface dose and OAR doses were compared. RESULTS: Conformity index was consistently better with VMAT than HDR-BT (p < 0.01). Maximum skin surface dose (D0.1cc) had a higher mean of 49.6 Gy with HDR-BT compared to 31.4 Gy for VMAT (p < 0.01). Significantly smaller volumes of healthy tissue were irradiated with VMAT than with HDR-BT. This can be seen in brain volumes receiving 10, 20 and 30 Gy EQD2 and in extremities receiving 5 and 10 Gy. When close to the volume, the lens received significantly lower doses with VMAT (p < 0.01). CONCLUSION: In this small sample, VMAT gives equal coverage with lower OAR and skin surface doses than HDR-BT for both scalp and extremities. VMAT is a useful technique for treating large, superficial volumes with significant curvature in one or more planes.

A novel 125I seeds fixed on gastric tube for treatment of inoperable esophageal carcinoma: A case report.

ABSTRACT: To explore the treatment benefit of 125I seeds fixed on a gastric tube in the early inoperable esophageal carcinoma (EC).Three senile patients with early inoperable EC who were treated with brachytherapy between October 2017 and February 2019 were included in this study. 125I seeds were fixed on the gastric tube, which was then inserted on the surface of the EC. One patient suffered from severe pulmonary insufficiency; 1 patient underwent colon cancer surgery one week before treatment and suffered from liver dysfunction and esophageal varices; 1 patient suffered from venous embolism of lower extremities and pulmonary artery embolism.All three patients were successfully operated and completed treatment. During the operation, no displacement and shedding of 125I seed gastric tube occurred. After surgery, the discomfort while swallowing and pain after eating were significantly improved. Moreover, dysphagia was relieved in patient 3. In addition, no complications, such as perforation or bleeding, occurred. Local lesions were effectively controlled.Gastric tube with 125I seeds provides a new treatment protocol for inoperable EC and malignant obstruction of esophageal carcinoma.

Multicatheter interstitial brachytherapy versus stereotactic radiotherapy with CyberKnife for accelerated partial breast irradiation: a comparative treatment planning study with respect to dosimetry of organs at risk.

BACKGROUND: The aim of the study was to dosimetrically compare multicatheter interstitial brachytherapy (MIBT) and stereotactic radiotherapy with CyberKnife (CK) for accelerated partial breast irradiation (APBI) especially concerning the dose of organs at risk (OAR-s). PATIENTS AND METHODS: Treatment plans of thirty-two MIBT and CK patients were compared. The OAR-s included ipsilateral non-target and contralateral breast, ipsilateral and contralateral lung, skin, ribs, and heart for left-sided cases. The fractionation was identical (4 x 6.25 Gy) in both treatment groups. The relative volumes (e.g. V100, V90) receiving a given relative dose (100%, 90%), and the relative doses (e.g. D0.1cm3, D1cm3) delivered to the most exposed small volumes (0.1 cm3, 1 cm3) were calculated from dose-volume histograms. All dose values were related to the prescribed dose (25 Gy). RESULTS: Regarding non-target breast CK performed slightly better than MIBT (V100: 0.7% vs. 1.6%, V50: 10.5% vs. 12.9%). The mean dose of the ipsilateral lung was the same for both techniques (4.9%), but doses irradiated to volume of 1 cm3 were lower with MIBT (36.1% vs. 45.4%). Protection of skin and rib was better with MIBT. There were no significant differences between the dose-volume parameters of the heart, but with MIBT, slightly larger volumes were irradiated by 5% dose (V5: 29.9% vs. 21.2%). Contralateral breast and lung received a somewhat higher dose with MIBT (D1cm3: 2.6% vs. 1.8% and 3.6% vs. 2.5%). CONCLUSIONS: The target volume can be properly irradiated by both techniques with similar dose distributions and high dose conformity. Regarding the dose to the non-target breast, heart, and contralateral organs the CK was superior, but the nearby organs (skin, ribs, ipsilateral lung) received less dose with MIBT. The observed dosimetric differences were small but significant in a few parameters at the examined patient number. More studies are needed to explore whether these dosimetric findings have clinical significance.