Class I and Class II Patients Treated with Damon System: A Study of Transversal, Sagittal and Torque Values Variations

ABSTRACT Objective: To analyze the transversal and anterior-posterior changes obtained in patients treated only with the Damon system. Material and Methods: 51 patients with either class I or class II division 1 sagittal relationship treated with the Damon system and the same archwire sequence were retrospectively selected. Dental casts of each patient before (T0) and after treatment (T1) were scanned and analyzed using NEMOCAST 3D software. Inter-molar, inter first-premolar, inter-second premolar and inter-canine distances were measured in both upper and lower arches. Initial and final lateral cephalograms were traced using the OrisCeph program. Pre and post-treatment measurements were compared using the t-test for repeated measurements. The Pearson Correlation Index and Linear Regression Analysis were used to determine the dependence between continuous variables. The significance level was set at 0.05. Results: Transversal diameters in the upper arch increase statistically significantly, especially in the bicuspid area. Initial intra-arch diameter was the only statistically significant variable correlated with the final expansion obtained. A linear negative correlation between the initial latero-posterior torque and the final expansion was observed in both arches. Conclusion: Using identical arches in patients with very different initial characteristics, the changes in bicuspids' diameters remain the most predominant. Patients with initial more negative torque in the posterior region had a higher expansion amount.

Establishing Cephalometric Norms in Primary Dentition Using Comprehensive Craniofacial Growth Analysis - A Digital Cephalometric Study

ABSTRACT Objective: To establish cephalometric norms in primary dentition among males and females using novel customized Comprehensive Cephalometric Growth (CCG) Analysis. Material and Methods: The study was conducted on 67 subjects with a mean age of 5.5 yrs. Digital lateral cephalometric radiographs were obtained using Planmeca Pro One. The digital images were then transferred to Nemoceph software. Craniofacial Growth (CCG) Analysis was configured in the software with five sub-groups. This sub-grouping was done such that related components were grouped together and comprehensively; it would provide an assessment of every component of the craniofacial region that could be affected either by treatment maneuver or growth process. The same was used for the cephalometric analysis and to determine the cephalometric norms in the primary dentition. Results: Certain linear measurements were higher among males when compared to females. However, most measurements remained similar among males and females during this age group. The CCG analysis provided a comprehensive knowledge of the craniofacial parameters during the growth process. Conclusion: The cephalometric norms during primary dentition thus established using Comprehensive Craniofacial Growth analysis would provide the data for early diagnosis and treatment planning in interceptive orthodontic treatment procedures.

Cephalometric for Orthognathic Surgery (COGS) Analysis for Saudi Population

ABSTRACT Objective: To establish the cephalometric (Ceph.) norm by Ceph. for orthognathic surgery (COGS) analysis for Saudi population. Material and Methods: 500 adult Saudi samples (250 males and 250 females) with the age range of 18-30 years old were selected for this study. The selections of samples were based on a normal occlusal relationship, no history of facial trauma and no previous orthodontic treatment. Lateral Ceph. radiographs were tracing by CASSOS software and analyzed by SPSS software according to COGS analysis. Results: Significant differences were showed between the Saudi males and females on most of the Ceph. parameters. The Saudi males had a convex facial profile with chin prominent and more bimaxillary protrusion, upper and lower lip protrusion than the Saudi females. Conclusion: This study evaluated the craniofacial morphological difference between the male and the female population in Saudi Arabia by using COGS analysis. The finding of this study will help for better diagnosis of orthodontic and orthognathic surgical treatment planning and identify the morphological facial characteristics of Saudi patients.

Serial measurements of facial asymmetry using a wooden tongue depressor in patients with congenital microtia.

BACKGROUND AND OBJECTIVES: Congenital microtia may be associated with hemifacial microsomia, but little is known about their correlation and development with aging. Historically, facial asymmetry is easily assessed by observing the occlusal cant using a tongue depressor. We serially measured the occlusal cant in children with microtia to evaluate change in facial asymmetry with growth. METHODS: Since 2011, frontal photographs of patients with congenital microtia biting a tongue depressor were obtained and reviewed. The occlusal angle was compared between the baseline and final photographs, and the change was compared between cant-positive (>3° at baseline) and cant-negative (<3° at baseline) groups. Multivariate analysis was conducted to determine variables associated with the change in occlusal angle. RESULTS: Overall, 105 patients were enrolled. With a mean age of 5.4 years at baseline and a mean follow-up of 3.9 years, clinically significant aggravation was observed in 15.4% and 24.2% of cant-positive and cant-negative patients, respectively. Hemifacial microsomia (OR, 4.825; p = 0.005) and occlusal angle at baseline (OR, 0.821; p = 0.045) were associated with aggravation, but the severity of microtia showed no significant association. CONCLUSIONS: When hemifacial microsomia was present, the occlusal cant seemed to be aggravated in children with microtia at later ages. When the occlusal cant was present without noticeable hemifacial microsomia, some compensation in facial asymmetry was expected. The use of a wooden tongue depressor is a simple, non-invasive, and radiologic hazard-free aid to detect notable change in facial asymmetry in children with microtia.

Effect of Experience in Landmark Identification on 2D Lateral Cephalograms on Performance of Dental Students Concerning Landmark Identification on 3D Cone Beam Computed Tomography Scans

Abstract Objective: To assess the effect of experience in landmark identification on two-dimensional (2D) lateral cephalograms on performance of dental students concerning landmark identification on three-dimensional (3D) cone-beam computed tomography (CBCT) scans. Material and Methods: This quasi-experimental study evaluated 40 dental students in two groups (n=20). Group 1 included senior dental students who had experience in landmark identification on 2D lateral cephalograms and Group 2 included third-year dental students with no such experience. Both groups received instructions on identification of eight landmarks on 3D CBCT scans. The coordinates of the landmarks were determined in x, y and z axes. One orthodontist determined the mean coordinates of each landmark as a reference by twice measurements with a one-week interval. The mean distance from the identified points to the reference points was reported as the mean consistency (MC), and the standard deviation of the mean was considered as precision of landmark identification. Data were analyzed using independent samples t-test. Results: The mean distances from the points identified as nasion, point B, orbitale, anterior nasal spine (ANS), menton, coronoid process and pogonion in x, y and z axes and point A in x and z axes (p<0.001) to the reference points in Group 1 were greater than those in Group 2 with no such experience. Conclusion: Previous experience in landmark identification on 2D cephalograms does not help in landmark identification on 3D CBCT scans and may even adversely affect the results.

Ricketts Cephalometric Analysis for Saudi Population

Abstract Objective: To evaluate the cephalometric norm for Saudi sample by Ricketts analysis (RA). Material and Methods: In this cross-sectional study, cephalometric radiographs were taken for 500 samples. The subjects included 250 males and 250 females. The ages of the subjects ranged from 18-30years. The criteria of selection were based on Class I incisor relationship, no skeletal abnormality and no previous orthodontic treatment. Lateral cephalometric radiographs were taken, traced and digitized by SPSS software, according to RA. An independent t-test was used to test the level of significance between genders. Results: Significant disparities found between Saudi males and females in dental and soft tissue measurements. The result showed that the distal position of the maxillary first molar to pterygoid vertical plane (U6 to Ptv) measurement was highly significantly greater (p<0.001) in Saudi males than females. Lower incisor to A-Pog (L1 to A-Pog) and lower lip to E plane was significantly longer (p<0.05) in Saudi males than females. Other measurements had no significant difference between Saudi males and females. Conclusion: The craniofacial morphology of the Saudi males was different from Saudi females using Ricketts analysis. This study will help the clinicians to diagnosis and treatment planning of orthodontic and orthognathic patients.

Soft Tissue Cephalometric Measurements Among Malaysian Malays and Chinese

Abstract Objective: To obtain the standardized values of individuals of Malaysian Malay and Chinese for further relevant research, such as treatment planning and aesthetical considerations. Material and Methods: In this retrospective study, 440 (305 were Malays and 135 were Chinese) standardized lateral cephalometric radiographs of orthodontic patients selected through simple random sampling are profiled using Holdaway's analysis. The independent t-test was used to assess the disparities in race and gender. The significant level was p<0.05. Results: Significant differences were found between the Malays and Chinese in their skeletal profile convexity, superior sulcus depth, inferior sulcus to the H line and nose prominence. Between Malay females and males, there are significant differences in superior sulcus depth, soft tissue subnasale to H line, basic upper lip thickness, upper lip thickness and nose prominence. Between Chinese males and females, there were differences in their skeletal profile convexity, upper lip to H line, basic upper lip thickness and upper lip thickness. Conclusion: The findings demonstrated the difference between standardized norms and the unique profiles of Malaysian Malays and Chinese. There are significant gender disparities in the soft tissue cephalometric measurements among Malaysian Malay and Chinese subjects.

Challenges in measuring angles between craniofacial structures.

OBJECTIVE: Three-dimensional (3D) angular measurements between craniofacial planes pose challenges to quantify maxillary and mandibular skeletal discrepancies in surgical treatment planning. This study aims to compare the reproducibility and reliability of two modules to measure angles between planes or lines in 3D virtual surface models. METHODOLOGY: Twenty oriented 3D virtual surface models de-identified and constructed from CBCT scans were randomly selected. Three observers placed landmarks and oriented planes to determine angular measurements of pitch, roll and yaw using (1) 3D pre-existing planes, (2) 3D planes created from landmarks and (3) lines created from landmarks. Inter- and intra-observer reproducibility and repeatability were examined using the Intra-Class Correlation (ICC) test. One observer repeated the measurements with an interval of 15 days. ANOVA was applied to compare the 3 methods. RESULTS: The three methods tested provided statistically similar, reproducible and reliable angular measurements of the facial structures. A strong ICC varying from 0.92 to 1.00 was found for the intra-observer agreement. The inter-observer ICC varied from 0.84 to 1.00. CONCLUSION: Measurements of 3D angles between facial planes in a common coordinate system are reproducible and repeatable either using 3D pre-existing planes, created based on landmarks or angles between lines created from landmarks.

An Alternative Method to Using a Mandibulometer.

Mandibular length, mandibular angle, and maximum ramus height measurements used during forensic evaluation of skeletal remains require use of a mandibulometer. This study presents a new method of taking these measurements from images, so that practitioners without access to an expensive mandibulometer or those working with 3D models (e.g., CT scans) can collect and utilize these measurements. Ten trials performed on a sample of 45 mandibles were used to compare measurements collected from photographs and images extracted from 3D surface scans to those collected with a mandibulometer, including intra- and inter-observer analyses. All technical error of measurement (TEM) values were less than 2 mm regardless of observer, trial, or method. Relative TEM values were less than 2% for all except mandibular length (2.10%) and ramus height (2.32%) for the right versus left photographs. Results are comparable with mandibulometer error rates, indicating that the proposed method is accurate and reliable.

Landmark Typology in Applied Morphometrics Studies: What's the Point?

Landmarks are the hallmark of biological shape analysis as discrete anatomical points of correspondence. Various systems have been developed for their classification. In the most widely used system, developed by Bookstein in the 1990s, landmarks are divided into three distinct types based on their anatomical locations and biological significance. As Bookstein and others have argued that different landmark types possess different qualities, e.g., that Type 3 landmarks contain deficient information about shape variation and are less reliably measured, researchers began using landmark types as justification for selecting or avoiding particular landmarks for measurement or analysis. Here, we demonstrate considerable variation in landmark classifications among 17 studies using geometric morphometrics (GM), due to disagreement in the application of both Bookstein's landmark typology and individual landmark definitions. A review of the literature furthermore shows little correlation between landmark type and measurement reproducibility, especially when factors such as differences in measurement tools (calipers, digitizer, or computer software) and data sources (dry crania, 3D models, or 2D images) are considered. Although landmark typology is valuable when teaching biological shape analysis, we find that employing it in research design introduces confusion without providing useful information. Instead, researchers should choose landmark configurations based on their ability to test specific research hypotheses, and research papers should include justifications of landmark choices along with landmark definitions, details on landmark collection methods, and appropriate interobserver and intraobserver analyses. Hence, while the landmarks themselves are crucial for GM, we argue that their typology is of little use in applied studies. Anat Rec, 302:1144-1153, 2019. © 2018 Wiley Periodicals, Inc.

Challenges in measuring angles between craniofacial structures

Abstract Objective: Three-dimensional (3D) angular measurements between craniofacial planes pose challenges to quantify maxillary and mandibular skeletal discrepancies in surgical treatment planning. This study aims to compare the reproducibility and reliability of two modules to measure angles between planes or lines in 3D virtual surface models. Methodology: Twenty oriented 3D virtual surface models de-identified and constructed from CBCT scans were randomly selected. Three observers placed landmarks and oriented planes to determine angular measurements of pitch, roll and yaw using (1) 3D pre-existing planes, (2) 3D planes created from landmarks and (3) lines created from landmarks. Inter- and intra-observer reproducibility and repeatability were examined using the Intra-Class Correlation (ICC) test. One observer repeated the measurements with an interval of 15 days. ANOVA was applied to compare the 3 methods. Results: The three methods tested provided statistically similar, reproducible and reliable angular measurements of the facial structures. A strong ICC varying from 0.92 to 1.00 was found for the intra-observer agreement. The inter-observer ICC varied from 0.84 to 1.00. Conclusion: Measurements of 3D angles between facial planes in a common coordinate system are reproducible and repeatable either using 3D pre-existing planes, created based on landmarks or angles between lines created from landmarks.

Accuracy and reliability of a low-cost, handheld 3D imaging system for child anthropometry.

The usefulness of anthropometry to define childhood malnutrition is undermined by poor measurement quality, which led to calls for new measurement approaches. We evaluated the ability of a 3D imaging system to correctly measure child stature (length or height), head circumference and arm circumference. In 2016-7 we recruited and measured children at 20 facilities in and around metro Atlanta, Georgia, USA; including at daycare, higher education, religious, and medical facilities. We selected recruitment sites to reflect a generally representative population of Atlanta and to oversample newborns and children under two years of age. Using convenience sampling, a total of 474 children 0-5 years of age who were apparently healthy and who were present at the time of data collection were included in the analysis. Two anthropometrists each took repeated manual measures and repeated 3D scans of each child. We evaluated the reliability and accuracy of 3D scan-derived measurements against manual measurements. The mean child age was 26 months, and 48% of children were female. Based on reported race and ethnicity, the sample was 42% Black, 28% White, 8% Asian, 21% multiple races, other or race not reported; and 16% Hispanic. Measurement reliability of repeated 3D scans was within 1 mm of manual measurement reliability for stature, head circumference and arm circumference. We found systematic bias when analyzing accuracy-on average 3D imaging overestimated stature and head circumference by 6 mm and 3 mm respectively, and underestimated arm circumference by 2 mm. The 3D imaging system used in this study is reliable, low-cost, portable, and can handle movement; making it ideal for use in routine nutritional assessment. However, additional research, particularly on accuracy, and further development of the scanning and processing software is needed before making policy and clinical practice recommendations on the routine use of 3D imaging for child anthropometry.

Reliability and validity of MicroScribe-3DXL system in comparison with radiographic cephalometric system: Angular measurements.

AIM: The aim of the study was to assess the reliability and validity of cephalometric variables from MicroScribe-3DXL. MATERIALS AND METHODS: Seven cephalometric variables (facial angle, ANB, maxillary depth, U1/FH, FMA, IMPA, FMIA) were measured by a dentist in 60 Malay subjects (30 males and 30 females) with class I occlusion and balanced face. Two standard images were taken for each subject with conventional cephalometric radiography and MicroScribe-3DXL. All the images were traced and analysed. SPSS version 2.0 was used for statistical analysis with P-value was set at P<0.05. RESULTS: The results revealed a significant statistic difference in four measurements (U1/FH, FMA, IMPA, FMIA) with P-value range (0.00 to 0.03). The difference in the measurements was considered clinically acceptable. The overall reliability of MicroScribe-3DXL was 92.7% and its validity was 91.8%. CONCLUSION: The MicroScribe-3DXL is reliable and valid to most of the cephalometric variables with the advantages of saving time and cost. This is a promising device to assist in diverse areas in dental practice and research.

Efeitos das terapias para disfunção temporomandibular sobre a postura craniocervical / Effects of therapies for temporomandibular disorders on craniocervical posture

O objetivo do presente estudo foi avaliar se as terapias de placa oclusal, fisioterapia e aconselhamento, empregadas para o tratamento da disfunção temporomandibular (DTM), alteram a postura craniocervical e quadro de dor. Trata-se de um ensaio clínico randomizado controlado cego, onde foram incluídos sujeitos previamente diagnosticados com DTM por meio do RDC/TMD (Research diagnostic criteria for temporomandibular disorders). Os pacientes foram sorteados entre quatro grupos de tratamento: placa oclusal (PO, n=17), fisioterapia (F, n= 19), aconselhamento (AC, n=15) e placa associada ao aconselhamento (PAC, n= 14), totalizando 65 indivíduos. Para a análise postural, uma teleradiografia foi realizada no baseline e após 1 mês da aplicação da terapia a fim de observar a distância occiptoatlas (DOA), a relação craniocervical (ACR) e o posicionamento do osso hioide (TH). Os traçados foram realizados nas imagens utilizando-se o Software CorelDraw X6 (2012 Corel Corporation, Canadá). Para análise da variável dor, a escala visual analógica foi aplicada antes e 1 mês após as terapias. Os dados obtidos foram submetidos a diversos testes T pareado (α=5%) e para a variável dor o teste SPANOVA foi aplicado. Com exceção do grupo PAC na variável ACR (p=0,003), os resultados mostraram que não houve diferença estatisticamente significativa para as variáveis analisadas quanto as diferentes terapias ao longo do tempo. Porém pode-se observar que todos os grupos de tratamento possibilitaram uma redução do quadro de dor dos pacientes (p=0.013) ao longo do tempo. Conclui-se que as terapias aplicadas pouco influenciam na postura craniocervical, mas são eficazes para o alivio da sintomatologia dolorosa (AU).

The objective of the present study was to evaluate whether the occlusal plaque, physiotherapy and counseling therapies used in the treatment of temporomandibular disorders (TMD) alter the craniocervical posture and the pain picture. This is a controlled, randomized, blinded study that included individuals previously diagnosed with TMD through the RDC / TMD (Research criteria criteria for temporomandibular disorders). The patients were randomly selected from four treatment groups: occlusal (OP, n = 17), physiotherapy (MT, n = 19), counseling (C, n = 15) and counseling, totaling 65 individuals. For the postural analysis, a teleradiography was performed at the baseline and 1 month after the application of the therapy, in order to observe the occipito-atlas distance (DOA), the craniocervical relationship (ACR) and the positioning of the hyoid bone. Traits were performed on the images using CorelDraw X6 software (2012 Corel Corporation, Canada). To analyze the pain variable, the visual analogue scale was applied before and 1 month after the therapies. The data obtained were submitted to several paired T tests (α = 5%) and for the pain variable the SPANOVA test was applied. With the exception of the PAC group in the ACR variable (p = 0.003), the results showed that there was no statistically significant difference for the analyzed variables regarding the different therapies over time. However, it can be observed that all the treatment groups allowed a reduction of the patients' pain picture (p = 0.013) over time. It's concluded that the therapies applied have little influence on craniocervical posture, but are effective for the relief of painful symptoms (AU).

Manual tracing versus smartphone application (app) tracing: a comparative study.

OBJECTIVE: This study aimed to compare the results of conventional manual cephalometric tracing with those acquired with smartphone application cephalometric tracing. MATERIALS AND METHODS: The cephalometric radiographs of 55 patients (25 females and 30 males) were traced via the manual and app methods and were subsequently examined with Steiner's analysis. Five skeletal measurements, five dental measurements and two soft tissue measurements were managed based on 21 landmarks. The durations of the performances of the two methods were also compared. RESULTS: SNA (Sella, Nasion, A point angle) and SNB (Sella, Nasion, B point angle) values for the manual method were statistically lower (p < .001) than those for the app method. The ANB value for the manual method was statistically lower than that of app method. L1-NB (°) and upper lip protrusion values for the manual method were statistically higher than those for the app method. Go-GN/SN, U1-NA (°) and U1-NA (mm) values for manual method were statistically lower than those for the app method. No differences between the two methods were found in the L1-NB (mm), occlusal plane to SN, interincisal angle or lower lip protrusion values. CONCLUSIONS: Although statistically significant differences were found between the two methods, the cephalometric tracing proceeded faster with the app method than with the manual method.

Absorbed doses for patients undergoing panoramic radiography, cephalometric radiography and CBCT.

OBJECTIVES: Contemporary dental radiology offers a wide spectrum of imaging methods but it also contributes to an increase in the participation of dental radiological diagnosis in the patient's exposure to ionizing radiation. The aim of this study is to determine the absorbed doses of the brain, spinal column, thyroid and eye lens for patients during panoramic radiography, cephalometric radiography and cone beam computed tomography (CBCT). MATERIAL AND METHODS: The thermoluminescent dosimetry and anthropomorphic phantom was used for measuring the doses. The 15 panoramic, 4 cephalometric and 4 CBCT exposures were performed by placing high-sensitivity thermoluminescent detectors (TLD) in 18 anatomical points of the phantom. RESULTS: The maximum absorbed dose recorded during performed measurements corresponds to the point representing the brainstem and it is 10 mGy. The dose value recorded by the TLD placed in the thyroid during CBCT imaging in relation to the panoramic radiography differs by a factor of 13.5. CONCLUSIONS: Cone beam computed tomography, in comparison with panoramic or cephalometric imaging technique, provides higher radiation doses to the patients. Int J Occup Med Environ Health 2017;30(5):705-713.

A practical formula for determining growth.

PURPOSE: We aimed to establish a practical method to evaluate skeletal age using cervical vertebrae. METHODS: The study consisted of hand-wrist and cephalometric radiographs of 324 subjects (167 girls, 157 boys; age range, 7.3-17.2 years). Skeletal ages of the subjects were calculated from hand-wrist radiographs, and cervical vertebral bodies were measured using cephalometric radiographs. A single formula based on C3 and C4 vertebral body heights with different coefficients for each gender was derived using ridge regression analysis. RESULTS: The correlation coefficients for vertebral and hand-wrist bone age were 0.825 and 0.856 for girls and boys, respectively. The correlations among vertebral bone age and C3 and C4 vertebral body heights were also found to be significant. The intraclass correlation (ICC) score was found to be 0.914, which shows high consistency between the two measurements of the same investigator for each C3 and C4 vertebral body height result. CONCLUSION: The formula derived for evaluating skeletal age in cephalometric radiographs is reliable and can be applied to both girl and boy subjects for legal requirements or therapeutic needs of age estimation.

Three-Dimensional Handheld Scanning to Quantify Head-Shape Changes in Spring-Assisted Surgery for Sagittal Craniosynostosis.

Three-dimensional (3D) imaging is an important tool for diagnostics, surgical planning, and evaluation of surgical outcomes in craniofacial procedures. Gold standard for acquiring 3D imaging is computed tomography that entails ionizing radiations and, in young children, a general anaesthesia. Three-dimensional photographic imaging is an alternative method to assess patients who have undergone calvarial reconstructive surgery. The aim of this study was to assess the utility of 3D handheld scanning photography in a cohort of patients who underwent spring-assisted correction surgery for scaphocephaly. Pre- and postoperative 3D scans acquired in theater and at the 3-week follow-up in clinic were postprocessed for 9 patients. Cephalic index (CI), head circumference, volume, sagittal length, and coronal width over the head at pre-op, post-op, and follow-up were measured from the 3D scans. Cephalic index from 3D scans was compared with measurements from planar x-rays. Statistical shape modeling (SSM) was used to calculate the 3D mean anatomical head shape of the 9 patients at the pre-op, post-op, and follow-up. No significant differences were observed in the CI between 3D and x-ray. Cephalic index, volume, and coronal width increased significantly over time. Mean shapes from SSM visualized the overall and regional 3D changes due to the expansion of the springs in situ. Three-dimensional handheld scanning followed by SSM proved to be an efficacious and practical method to evaluate 3D shape outcomes after spring-assisted cranioplasty in individual patients and the population.