Reproductive toxicity assessment of cellulose nanofibers, citric acid, and branched polyethylenimine in sea urchins: Eco-design of nanostructured cellulose sponge framework (Part B).

In the framework of a safe-by-design approach, we previously assessed the eco-safety of nanostructured cellulose sponge (CNS) leachate on sea urchin reproduction. It impaired gamete quality, gamete fertilization competence, and embryo development possibly due to the leaching of chemical additives used during the CNS synthesis process. To extend this observation and identify the component(s) that contribute to CNS ecotoxicity, in the present study, we individually screened the cytotoxic effects on sea urchin Arbacia lixula and Paracentrotus lividus gametes and embryos of the three main constituents of CNS, namely cellulose nanofibers, citric acid, and branched polyethylenimine. The study aimed to minimize any potential safety risk of these components and to obtain an eco-safe CNS. Among the three CNS constituents, branched polyethylenimine resulted in the most toxic agent. Indeed, it affected the physiology and fertilization competence of male and female gametes as well as embryo development in both sea urchin species. These results are consistent with those previously reported for CNS leachate. Moreover, the characterisation of CNS leachate confirmed the presence of detectable branched polyethylenimine in the conditioned seawater even though in a very limited amount. Altogether, these data indicate that the presence of branched polyethylenimine is a cause-effect associated with a significant risk in CNS formulations due to its leaching upon contact with seawater. Nevertheless, the suggested safety protocol consisting of consecutive leaching treatments and conditioning of CNS in seawater can successfully ameliorate the CNS ecotoxicity while maintaining the efficacy of its sorbent properties supporting potential environmental applications.

Characterization and safety assessment of bamboo shoot shell cellulose nanofiber: Prepared by acidolysis combined with dynamic high-pressure microfluidization.

The preparation of cellulose nanofiber (CNF) using traditional methods is currently facing challenges due to concerns regarding environmental pollution and safety. Herein, a novel CNF was obtained from bamboo shoot shell (BSS) by low-concentration acid and dynamic high-pressure microfluidization (DHPM) treatment. The resulting CNF was then characterized, followed by in vitro and in vivo safety assessments. Compared to insoluble dietary fiber (IDF), the diameters of HIDF (IDF after low-concentration acid hydrolysis) and CNF were significantly decreased to 167.13 nm and 70.97 nm, respectively. Meanwhile, HIDF and CNF showed a higher crystallinity index (71.32 % and 74.35 %). Structural analysis results indicated the successful removal of lignin and hemicellulose of HIDF and CNF, with CNF demonstrating improved thermostability. In vitro, a high dose of CNF (1500 µg/mL) did not show any signs of cytotoxicity on Caco-2 cells. In vivo, no death was observed in the experimental mice, and there was no significant difference between CNF (1000 mg/kg·bw) and control group in hematological index and histopathological analysis. Overall, this study presents an environmentally friendly method for preparing CNF from BSS while providing evidence regarding its safety through in vitro and in vivo assessments, laying the foundation for its potential application in food.

Physiological response of mussel to rayon microfibers and PCB's exposure: Overlooked semi-synthetic micropollutant?

Rayon microfibers, micro-sized semi-synthetic polymers derived from cellulose, have been frequently detected and reported as "micropollutants" in marine environments. However, there has been limited research on their ecotoxicity and combined effects with persistent organic pollutants (POPs). To address these knowledge gaps, thick-shell mussels (Mytilus coruscus) were exposed to rayon microfibers at 1000 pieces/L, along with polychlorinated biphenyls (PCBs) at 100 and 1000 ng/L for 14 days, followed by a 7-day recovery period. We found that rayon microfibers at the environmentally relevant concentration exacerbated the irreversible effects of PCBs on the immune and digestive systems of mussels, indicating chronic and sublethal impacts. Furthermore, the results of 16 s rRNA sequencing demonstrated significant effects on the community structure, species richness, and diversity of the mussels' intestinal microbiota. The branching map analysis identified the responsive bacteria to rayon microfibers and PCBs belonging to the Proteobacteria, Actinobacteriota, and Bacteroidota phyla. Despite not being considered a conventional plastic, the extensive and increasing use of rayon fibers, their direct toxicological effects, and their interaction with POPs highlight the need for urgent attention, investigation, and regulation to address their contribution to "micropollution".

Chemical, ecotoxicological, cytotoxic, and mutagenic evaluation of gelling agents used in the production of 70% alcohol gel.

With COVID-19, there has been an increase in the use of gelling agents for hand sanitizer production, and as a result, the release of this product into wastewater could induce impacts and adverse reactions in living organisms. Thus, ecotoxicological and cytotoxicological assessments of gelling agents with test organisms from different trophic levels are necessary to assess their environmental safety. For this, seven cellulose-based gelling agents and a polyacrylic acid derivative (C940) were selected for tests with Artemia salina. The most toxic agent was tested on Allium cepa to assess cytotoxicity. The volatile compounds of the gelling agents were analyzed. Cellulose-based gelling agents were not considered toxic according to their LC50, but C940 presented moderate toxicity to A. salina and cytotoxicity to Allium cepa, but without mutagenicity. In addition, C940 contained cyclohexane as a volatile compound. Thus, cellulose-based gelling agents are better environmental options than carbomer for 70% alcohol gel sanitizer.

Contaminant microorganisms in the in vitro evaluation of cellular responses of cellulose nanofibers and their microbial inactivation using gamma irradiation.

Cellulose nanofibers (CNFs) are fibrous nanomaterials produced from plants. Since some nanomaterials are toxic, toxicity evaluation, including in vitro examinations using cultured cells, is essential for the effective use of CNFs. On the other hand, microorganisms in the environment can contaminate CNF suspensions. The contamination of CNF samples and the effects of contaminating microorganisms on in vitro examinations were investigated in this study. Microorganism contamination in CNF samples was examined, and microbial inactivation of CNF suspensions using gamma irradiation was evaluated. After gamma-ray irradiation at absorbed doses of 0.5, 1, 5, and 10 kGy, the cellular effects of CNF suspensions were examined using 6 types of cultured cell, HaCaT, A549, Caco-2, MeT-5A, THP-1, and NR8383 cells. CNF samples were contaminated with bacteria and CNF suspensions exhibited endotoxin activity. Gamma irradiation effectively inactivated the microorganisms contained in the CNF suspensions. When the absorbed dose was 10 kGy, the fiber length of CNF was shortened, but the effect on CNF was small at 1.0 kGy or less. CNF suspensions showed lipopolysaccharides (LPS)-like cellular responses and strongly induced interleukin-8, especially in macrophages. Absorbed doses of at least 10 kGy did not affect the LPS-like activity. In this study, it was shown that the CNF suspension may be contaminated with microorganisms. Gamma irradiation was effective for microbial inactivation of suspension for invitor toxicity evaluation of CNF. In vitro evaluation of CNFs requires attention to the effects of contaminants such as LPS.

In vitro immune and redox response induced by cationic cellulose-based nanomaterials.

Cellulose nanocrystals (CNCs) display remarkable strength and physicochemical properties with significant potential applications. To better understand the potential adjuvanticity of a nanomaterial, it is important to investigate the extent of the immunological response, the mechanisms by which they elicit this response, and how this response is associated with their physicochemical characteristics. In this study, we investigated the potential mechanisms of immunomodulation and redox activity of two chemically related cationic CNC derivatives (CNC-METAC-1B and CNC-METAC-2B), using human peripheral blood mononuclear cells and mouse macrophage cells (J774A.1). Our data demonstrated that the biological effects caused by these nanomaterials occurred mainly with short term exposure. We observed opposite immunomodulatory activity between the tested nanomaterials. CNC-METAC-2B, induced IL-1ß secretion at 2 h while CNC-METAC-1B decreased it at 24 h of treatment. In addition, both nanomaterials caused more noticeable increases in mitochondrial reactive oxygen species (ROS) at early time. The differences in apparent sizes of the two cationic nanomaterials could explain, at least in part, the discrepancies in biological effects, despite their closely related surface charges. This work provides initial insights about the complexity of the in vitro mechanism of action of these nanomaterials as well as foundation knowledge for the development of cationic CNCs as potential immunomodulators.

Potential issues specific to cytotoxicity tests of cellulose nanofibrils.

Cellulose nanofibrils (also called cellulose nanofibers or nanofibrillated cellulose [CNFs]) are novel polymers derived from biomass with excellent physicochemical properties and various potential applications. However, the introduction of such new materials into the market requires thorough safety studies to be conducted. Recently, toxicity testing using cultured cells has attracted attention as a safety assessment that does not rely on experimental animals. This article reviews recent information regarding the cytotoxicity testing of CNFs and highlights the issues relevant to evaluating tests. In the literature, we found that a variety of cell lines and CNF exposure concentrations was evaluated. Furthermore, the results of cytotoxicity results tests differed and were not necessarily consistent. Numerous reports that we examined had not evaluated endotoxin/microbial contamination or the interaction of CNFs with the culture medium used in the tests. The following potential specific issues involved in CNF in vitro testing, were discussed: (1) endotoxin contamination, (2) microbial contamination, (3) adsorption of culture medium components to CNFs, and (4) changes in aggregation/agglomeration and dispersion states of CNFs resulting from culture medium components. In this review, the available measurement methods and solutions for these issues are also discussed. Addressing these points will lead to a better understanding of the cellular effects of CNFs and the development of safer CNFs.

Acute and multigenerational effects of petroleum- and cellulose-based microfibers on growth and photosynthetic capacity of Lemna minor.

Comparative toxicological assessment studies on the effects of petroleum- and cellulose-based microfibers on aquatic plants are limited. Therefore, we evaluated the acute and 10-generational toxicological effects of two types of petroleum- and cellulose-based microfibers on the duckweed Lemna minor. Plant growth and photosynthesis parameters were monitored as bioindicators. The multigenerational test revealed the following ranking of the microfibers according to the severity of their effects on L. minor: polypropylene > lyocell > viscose > polyethylene terephthalate. The acute tests revealed a significant increase in the energy required to initiate photosynthesis, although the growth of L. minor was not adversely affected by any microfiber. Both petroleum- and cellulose-based microfibers induced adverse effects on the growth and photosynthesis of L. minor in multigenerational tests. The results of the generational tests contribute to the understanding of the long-term adverse effects of microfibers on aquatic plants.

Effects of lipid type and toxicological properties on the digestion of cellulose nanocrystals in simulated gastrointestinal tract.

This study aimed to understand the impact of different oil types on the cellulose nanocrystals (CNCs) to modulate lipid digestion and the in vitro gastrointestinal toxicity of CNCs in food systems. We explored the ability of CNCs to modulate lipid digestion in a simulated gastrointestinal system and monitored the gastrointestinal fate of CNC-based emulsions with different oil types. Finally, a small intestine epithelial model was used to evaluate the influence of cytotoxicity. The results suggested that the addition of 0.6 wt% CNCs in the high-fat food model reduced the hydrolysis of free fatty acids (FFAs) from triglycerides by 37.8% after the small intestine phase. CNCs showed the best effect in reducing lipid digestion in emulsions with high unsaturation triglycerides. In addition, the toxicology results suggest that 0.6 wt% CNCs had only a slight effect on reactive oxygen species and cytotoxicity, and no significant change in cell-layer integrity.

Effect of Surface Modification on the Pulmonary and Systemic Toxicity of Cellulose Nanofibrils.

Cellulose nanofibrils (CNFs) have emerged as sustainable options for a wide range of applications. However, the high aspect ratio and biopersistence of CNFs raise concerns about potential health effects. Here, we evaluated the in vivo pulmonary and systemic toxicity of unmodified (U-CNF), carboxymethylated (C-CNF), and TEMPO (2,2,6,6-tetramethyl-piperidin-1-oxyl)-oxidized (T-CNF) CNFs, fibrillated in the same way and administered to mice by repeated (3×) pharyngeal aspiration (14, 28, and 56 µg/mouse/aspiration). Toxic effects were assessed up to 90 days after the last administration. Some mice were treated with T-CNF samples spiked with lipopolysaccharide (LPS; 0.02-50 ng/mouse/aspiration) to assess the role of endotoxin contamination. The CNFs induced an acute inflammatory reaction that subsided within 90 days, except for T-CNF. At 90 days post-administration, an increased DNA damage was observed in bronchoalveolar lavage and hepatic cells after exposure to T-CNF and C-CNF, respectively. Besides, LPS contamination dose-dependently increased the hepatic genotoxic effects of T-CNF.

Investigation of eight cellulose nanomaterials' impact on Differentiated Caco-2 monolayer integrity and cytotoxicity.

The potential applications of cellulose nanomaterials (CNMs) as food additives or in food packaging, present a possible source of human ingestion. While micron- and macro-scale cellulose products are classified as Generally Regarded As Safe, the safety of ingested nano-scale cellulose is largely unknown. Using fully differentiated Caco-2 cells, the perturbation of intestinal barrier function and cytotoxicity was investigated for four nanocellulose crystals (CNCs) and four nanocellulose fibrils (CNFs) following 24 h of exposure at 50 µg/mL. Scanning electron microscope showed some aggregation of both CNCs and CNFs. X-ray photoelectron spectroscopy analyses showed that carbon and oxygen were the main elements. The zeta-potential for CNMs formulated in cell culture medium showed a negative surface charge. Two CNMs increased cell membrane permeability and three CNMs decreased the cell metabolic activity. While three CNMs lead to cytotoxic responses, no changes in apparent permeability coefficient (Papp) for dextran or tight junction integrity were found. Our results show that three CNMs induce cytotoxicity in differentiated Caco-2 cells, demonstrating the need to understand the role of size and shape. The interaction between CNMs and the intestinal epithelium needs to be evaluated to understand potential intestinal barrier dysfunction and resulting health implications following CNM ingestion.

Overview of potential adverse health effects of oral exposure to nanocellulose.

Nanocellulose is an emerging material for which several food-related applications are foreseen, for example, novel food, functional food, food additive or in food contact materials. Nanocellulose materials can display a range of possible shapes (fibers, crystals), sizes and surface modifications. For food-related applications in the EU, information on the safety of substances must be assessed. The present review summarizes the current knowledge on (possible) adverse health effects of nanocellulose upon oral exposure, keeping EU regulatory aspects in mind. The overview indicates that toxicity data, especially from in vivo studies, are limited and outcomes are not unambiguous. The hazard assessment is further complicated by: the diversity in morphologies and surface modifications, lack of standard reference materials, limited knowledge about intestinal fate and absorption, analytical difficulties in biological matrices, dispersion issues, the possible presence of impurities and interferences within biological assays. Two subchronic in vivo toxicity studies show no indications of toxicity for two specific nanocellulose materials, even at high doses. However, these studies may have missed certain early or nano-specific toxic effects, such as inflammation potential, for which other, subacute studies provide some indications. Most in vitro studies show no cytotoxicity; however, several indicate that effects on oxidative stress and inflammatory responses depend on differences in size or surface treatments. Further, too few studies assessed genotoxicity of nanocelluloses. Therefore, immunotoxicity, oxidative stress and genotoxicity require further attention, as do absorption and effects on nutrient uptake. Recommendations for future research facilitating the safety assessment and safe-by-design of nanocellulose in food-related applications are provided.

Surface functionalization and size modulate the formation of reactive oxygen species and genotoxic effects of cellulose nanofibrils.

BACKGROUND: Cellulose nanofibrils (CNFs) have emerged as a sustainable and environmentally friendly option for a broad range of applications. The fibrous nature and high biopersistence of CNFs call for a thorough toxicity assessment, but it is presently unclear which physico-chemical properties could play a role in determining the potential toxic response to CNF. Here, we assessed whether surface composition and size could modulate the genotoxicity of CNFs in human bronchial epithelial BEAS-2B cells. We examined three size fractions (fine, medium and coarse) of four CNFs with different surface chemistry: unmodified (U-CNF) and functionalized with 2,2,6,6-tetramethyl-piperidin-1-oxyl (TEMPO) (T-CNF), carboxymethyl (C-CNF) and epoxypropyltrimethylammonium chloride (EPTMAC) (E-CNF). In addition, the source fibre was also evaluated as a non-nanosized material. RESULTS: The presence of the surface charged groups in the functionalized CNF samples resulted in higher amounts of individual nanofibrils and less aggregation compared with the U-CNF. T-CNF was the most homogenous, in agreement with its high surface group density. However, the colloidal stability of all the CNF samples dropped when dispersed in cell culture medium, especially in the case of T-CNF. CNF was internalized by a minority of BEAS-2B cells. No remarkable cytotoxic effects were induced by any of the cellulosic materials. All cellulosic materials, except the medium fraction of U-CNF, induced a dose-dependent intracellular formation of reactive oxygen species (ROS). The fine fraction of E-CNF, which induced DNA damage (measured by the comet assay) and chromosome damage (measured by the micronucleus assay), and the coarse fraction of C-CNF, which produced chromosome damage, also showed the most effective induction of ROS in their respective size fractions. CONCLUSIONS: Surface chemistry and size modulate the in vitro intracellular ROS formation and the induction of genotoxic effects by fibrillated celluloses. One cationic (fine E-CNF) and one anionic (coarse C-CNF) CNF showed primary genotoxic effects, possibly partly through ROS generation. However, the conclusions cannot be generalized to all types of CNFs, as the synthesis process and the dispersion method used for testing affect their physico-chemical properties and, hence, their toxic effects.

Synthesis of biocompatible nanocrystalline cellulose against folate receptors as a novel carrier for targeted delivery of doxorubicin.

We designed amine-functionalized nanocrystalline cellulose grafted folic acid/magnetic nanoparticles (AF-NCC/Fe3O4 NPs) against folate receptors for targeted delivery of doxorubicin (DOX). Toxicity is a major side effect of DOX, damaging vital organs such as the heart, kidney, and liver; for example, it causes dilated cardiomyopathy and hepatotoxicity. Accordingly, we aimed to reduce this adverse effect and increase the targeted delivery of DOX to the right point of cancer cells by using the unique features of cancer cells. The characterizations were approved in each step using Fourier transform infrared (FTIR), scanning electron microscope (SEM), X-ray diffraction (XRD), transmission electron microscopy (TEM), energy dispersive X-ray (EDX), zeta potential, and dynamic light scattering (DLS) analysis techniques. Encapsulation efficacy of AF-NCC/Fe3O4 NPs was 99.6%; drug release investigations showed excellent stability in physiological conditions (pH âˆ¼ 7.4) and a high release rate in the low pH condition of cancer environments (pH âˆ¼ 5.0). The hemolysis assay and Masson's trichrome and hematoxylin and eosin (H&E) staining results showed that the nanocarrier was entirely biocompatible. In vitro cell viability study approved that the designed nanocarrier increased the therapeutic effects of DOX on Saos-2 cells. The cellular internalization results displayed a high percentage of uptake within 2 h. Real-time reverse transcriptase-polymerase chain reaction (RT-PCR) was applied for the evaluation of tumor protein p53 (p53), p21, and Bcl-2-associated X protein (Bax). DOX exerted its effects through DNA damage and oxidative stress that led to p53 upregulation, and p53 inhibited cell cycle progression. This arrest initiated apoptosis and inhibited cell migration. In summary, encapsulating DOX in AF-NCC/Fe3O4 NPs dramatically decreases the toxic effects of this chemotherapeutic agent on vital organs, especially on the heart. This smart nanocarrier increases the delivery of DOX using acid folic on its surface and also enhances the DOX release in the acidic environment of cancer cells. DOX exerts its therapeutic effects by the initiation of apoptosis and inhibition of migration.

Ecotoxicity of cationic cellulose polymers to aquatic biota: The influence of charge density.

Better performances of cellulose-based polymers can be achieved by adjust their architecture including the density of cationic modifications. In this study, the influence of cationic substitution on the ecotoxicity of four quaternized hydroxyethyl cellulose polymers (SK-H, SK-L, SK-M, SK-MH) was studied, using an aquatic biota acute ecotoxicity classification, and rheological and physicochemical characterization. The ecotoxicity characterization was achieved by performing standard ecotoxicity assays with seven key trophic level species: Vibrio fischeri, Raphidocelis subcapitata, Chlorella vulgaris, Daphnia magna, Brachionus calyciflorus, Heterocypris incongruens, and Danio rerio. Median effective concentrations were used to compute hazard concentrations, through the species sensitive distribution curves method. The microalga C. vulgaris and rotifer B. calyciflorus were the most sensitive species to the studied polymers. The SK-H variant was highly toxic to the rotifer. Overall, variants with intermediate levels of cationic charge (SK-M, SK-MH) presented the lowest toxicity. The SK-M variant showed the lowest value of maximum acceptable concentration (0.00354 mg/L), thus being indicated as the least toxic variant. Therefore, the obtained results suggest that industry could direct the development of this type of polymers by tailoring its cationic substitution to moderate levels, in such a way that both functionality and environmental toxicity could be maximized.

Fabrication of Bacterial Cellulose-Based Dressings for Promoting Infected Wound Healing.

Bacterial cellulose (BC) holds several unique properties such as high water retention capability, flexibility, biocompatibility, and high absorption capacity. All these features make it a potential material for wound healing applications. However, it lacks antibacterial properties, which hampers its applications for infectious wound healings. This study reported BC-based dressings containing ε-polylysine (ε-PL), cross-linked by a biocompatible and mussel-inspired polydopamine (PDA) for promoting infectious wound healing. BC membranes were coated with PDA by a simple self-polymerization process, followed by treating with different contents of ε-PL. The resulted membranes showed strong antibacterial properties against tested bacteria by both in vitro and in vivo evaluations. The membranes also exhibited hemocompatibility and cytocompatibility by in vitro investigations. Moreover, the functionalized membranes promoted infected wound healing using Sprague-Dawley rats as a model animal. A complete wound healing was observed in the group treated with functionalized membranes, while wounds were still open for control and pure BC groups in the same duration. Histological investigations indicated that the thickness of newborn skin was greater and smoother in the groups treated with modified membranes in comparison to neat BC or control groups. These results revealed that the functionalized membranes have great potential as a dressing material for infected wounds in future clinical applications.

Hemocompatibility, biodegradability and acute toxicity of acetylated cellulose nanocrystals of different types in comparison.

Promotion of promising cellulose nanocrystals (CNC) is largely dependent on the relationship between their morphology, surface chemical composition, and supramolecular structure with toxicity, hemocompatibility, and biodegradability. This paper outlines comparative and integrated analysis of the mentioned biocompatibility aspects of partially acetylated rod-, and disc-lake morphology of CNC with crystalline cellulose allomorphs I and II. These data have also included the study of CNC obtained from the sulfuric acid solutions. The aqueous solution of all types of tested CNC has not been toxic to mice after oral administration. Morphology of internal organs has not changed. However, in case of disc-like particles, the kidney mass coefficient noticeably changed. CNC have neither triggered platelet aggregation nor destroyed the red cell membrane. Intravenous administration to rabbits has not affected the plasma clotting time. Rod-like CNC are more resistant, and the disc-like particles are more susceptible to degradation under the influence of cellulases.

Dialdehyde Nanocrystalline Cellulose as Antibiotic Substitutes against Multidrug-Resistant Bacteria.

Antibiotic abuse resulted in the emergence of multidrug-resistant Gram-positive pathogens, which pose a severe threat to public health. It is urgent to develop antibiotic substitutes to kill multidrug-resistant Gram-positive pathogens effectively. Herein, the antibacterial dialdehyde nanocrystalline cellulose (DNC) was prepared and characterized. The antibacterial activity and biosafety of DNC were studied. With the increasing content of aldehyde groups, DNC exhibited high antibacterial activity against Gram-positive pathogens in vitro. DNC3 significantly reduced the amounts of methicillin-resistant Staphylococcus aureus (MRSA) on the skin of infected mice models, which showed low cytotoxicity, excellent skin compatibility, and no acute oral toxicity. DNC exhibited potentials as antibiotic substitutes to fight against multidrug-resistant bacteria, such as ingredients in salves to treat skin infection and other on-skin applications.

A new biodegradable nano cellulose-based drug delivery system for pH-controlled delivery of curcumin.

Targeted delivery and controlled release of drugs are attractive methods for avoiding the drug's leakage during blood circulation and burst release of the drug. We prepared a nano cellulose-based drug delivery system (DDS) for the effective delivery of curcumin (CUR). In the present scenario, the role of nanoparticles in fabricating the DDS is an important one and was characterized using various techniques. The drug loading capacity was high as 89.2% at pH = 8.0, and also the maximum drug release takes place at pH = 5.5. In vitro cell viability studies of DDS on MDA MB-231; breast cancer cells demonstrated its cytotoxicity towards cancer cells. The prepared DDS was also examined for apoptosis, hemocompatibility, and Chorioallantoic membrane (CAM) studies to assess its pharmaceutical field application and the investigation results recommended that it may serve as a potential device for targeted delivery and controlled release of CUR for cancer treatment.

Synergistic Photodynamic and Photothermal Antibacterial Activity of In Situ Grown Bacterial Cellulose/MoS2-Chitosan Nanocomposite Materials with Visible Light Illumination.

Owing to the rise in prevalence of multidrug-resistant pathogens attributed to the overuse of antibiotics, infectious diseases caused by the transmission of microbes from contaminated surfaces to new hosts are an ever-increasing threat to public health. Thus, novel materials that can stem this crisis, while also functioning via multiple antimicrobial mechanisms so that pathogens are unable to develop resistance to them, are in urgent need. Toward this goal, in this work, we developed in situ grown bacterial cellulose/MoS2-chitosan nanocomposite materials (termed BC/MoS2-CS) that utilize synergistic membrane disruption and photodynamic and photothermal antibacterial activities to achieve more efficient bactericidal activity. The BC/MoS2-CS nanocomposite exhibited excellent antibacterial efficacy, achieving 99.998% (4.7 log units) and 99.988% (3.9 log units) photoinactivation of Gram-negative Escherichia coli and Gram-positive Staphylococcus aureus, respectively, under visible-light illumination (xenon lamp, 500 W, λ ≥ 420 nm, and 30 min). Mechanistic studies revealed that the use of cationic chitosan likely facilitated bacterial membrane disruption and/or permeability, with hyperthermia (photothermal) and reactive oxygen species (photodynamic) leading to synergistic pathogen inactivation upon visible-light illumination. No mammalian cell cytotoxicity was observed for the BC/MoS2-CS membrane, suggesting that such composite nanomaterials are attractive as functional materials for infection control applications.