Clonagem, expressão recombinante e validação por microarray de proteínas alimentares potencialmente alergênicas / Cloning, recombinant expression and validation by microarray of potentially allergenic food proteins

A maioria das respostas alérgicas a alimentos é mediada por IgE, que pode ser detectada para fins de diagnóstico da alergia alimentar. No entanto, para isso é necessário que alérgenos purificados estejam disponíveis para a elaboração dos diferentes formatos de ensaio, inclusive por microarray, que se constitui em uma ferramenta bastante útil para análise simultânea, e também para a identificação de reatividade cruzada. A esse respeito, é imprescindível ampliar a plataforma de alérgenos que possam ser empregados para a confecção de microarrays. Atualmente, alguns alimentos que constituem objeto de interesse na clínica em função do número de casos de alergia, e sobre os quais as informações a respeito dos alérgenos são escassas, são: abacaxi, mamão, mandioca e manga. Assim, o objetivo desse trabalho foi clonar, expressar e purificar proteínas potencialmente alergênicas de alimentos de importância regional. Após confirmadas por ensaios imunológicos, essas proteínas foram utilizadas na construção e validação de um microarray através de ensaios com os soros de pacientes alérgicos aos alimentos selecionados. Para atingir esse objetivo, foram selecionadas proteínas potencialmente alergênicas coincidentes, apontadas tanto pela similaridade com espécies taxonomicamente mais próximas, quanto pela técnica 2D Western Blotting acoplada à espectrometria de massas. Dezenove proteínas, sendo 4 de abacaxi, 5 de mamão, 6 de mandioca e 4 de manga, foram expressas em Pichia pastoris, purificadas e impressas em um microarray. Após incubar essas proteínas com os soros dos pacientes alérgicos aos alimentos estudados, 18 proteínas mostraram-se potencialmente alergênicas. Além disso, foi observada reatividade cruzada entre proteínas dos alimentos estudados e também em relação ao látex e outros frutos

The majority of allergic reactions to foods is IgE-mediated, which can be detected for the diagnosis of food allergy. However, purified allergens are necessary to produce different kinds of allergy tests, including microarray, which is a useful tool for simultaneous analysis, as well as for the identification of cross-reactivity. In this respect, it is essential to expand the platform of allergens to include them on microarrays. Nowadays, some foods that are object of interest in the clinical area in Brazil and it is necessary a further evaluation about their potential allergens, since there is a limited information about them, are: pineapple, papaya, cassava and mango. Therefore, the aim of this study was cloning, expressing and purifying potentially allergenic proteins of important Brazilian foods. After confirmed by immunological tests, these proteins were used in microarray production and validation by assays with sera from allergic patients to the selected foods. Achieving this goal, matching potentially allergenic proteins were selected, which were identified by comparison among taxonomically closer species (in silico) and 2D Western Blotting coupled with Mass Spectrometry. Nineteen proteins: 4 from pineapple, 5 from papaya, 6 from cassava and 4 from mango were expressed in Pichia pastoris, purified and printed on a microarray. After incubating those proteins with sera from allergic patients to the selected foods, 18 proteins were detected as potentially allergenic. In addition, cross-reactivity was observed among the proteins from the studied foods, and also regarding to the latex and other fruits

Studies on the enzymatic specificity of diguanylate cyclases domains and the production of new second messengers / Estudos na especificidade enzimática de diguanilato ciclases e na produção de novos segundos mensageiros

In the first chapter, studies on substrate recognition and enzymatic activity of GGDEF domains are presented. Many proteins containing GGDEF domains are diguanylate cyclases (DGCs, EC 2.7.7.65), enzymes that catalyze the conversion of 2 GTP molecules into the second messenger c-di-GMP in prokaryotes. This molecule is primarily implicated in the transition between motile and sessile lifestyles, as well several other phenotypes. Redundancy and diversity of GGDEF domain sequences in many bacterial genomes raises the possibility that other enzymatic functions may yet be discovered. To test this hypothesis, i) the effect of point mutations on the structure and enzymatic activity of GGDEF domains is analyzed, ii) the enzymatic specificity of wild-type GGDEF domains from different proteins is also tested, and iii) when non-canonical products are detected, enzymatic models are studied to understand its preferential production. The principal results obtained from these studies are as follows. Seven mutants of the DGC PleD (a GGDEF containing-protein from Caulobacter crescentus) were constructed and the crystallographic structure of two of them was solved, showing that they are unlikely to bind the guanine moiety in its active site. Additionally, five mutants of XAC0610, another DGC from Xanthomonas citr, were constructed and their substrate specificities were evaluated. None of those mutants were able to use ATP as a substrate. Finally, seven different GGDEF domain-containing DGCs from different sources were expressed and purified and their enzymatic specificities were tested with several nucleotide triphosphates. One enzyme, GSU1658 from Geobacter sulfurreducens was particularly promiscuous and shown to produce c-di-GMP, c-di-AMP, c-di-IMP, c-di-2´dGMP, cGAMP, c-GIMP, and c-AIMP. Interestingly, XAC0610 was able to recognize 2´dGTP as substrate. Analysis of enzyme kinetics of XAC0610 in presence of 2´dGTP and/or GTP showed the preferential formation of the hybrid linear product pppGp2´dG. The second chapter present studies on cyanide metabolism in Bacillus with focus on the cyanide dihydratase of Bacillus safensis. Cyanide is widely used in industries due to its high affinity for metals. This same ability confers potent toxicity to this compound. Thus, industries must reduce the cyanide concentration from wastewater before its final disposal. Physical, chemical, and biological methods have been developed to achieve this goal, but knowledge about metabolic pathways and the biology of enzymes involved in cyanide degradation is still scarce. Here, the isolation of a Bacillus safensis strain from mine tailings in Peru is described. Classification of this strain was done through a comparative analysis of 132 core genomes of strains from the Bacillus pumilus group. Sequence analysis determined that a cyanide dihydratase (CynD, EC 3.5.5.1)) encoded in the genome of the isolated strain was likely the enzyme responsible for cyanide degradation. Confirmation of the cyanide degrading activity of CynD from this strain was achieved by cloning, expression and purification of the enzyme and its enzymatic characterization. CynD from this strain was active up to pH 9 and oligomerization patterns analyzed by SEC-MALS and electron microscopy showed that the enzyme forms large helical structures at pH 8 and smaller structures at higher pHs. Finally, we show that CynD expression is strongly induced in the presence of cyanide. The last two years of graduate studies were carried out in the context of the COVID-19 pandemic. Thanks to the large amount of publicly available genomic data, we were able to carry out studies on the worldwide dynamics of the spread of SARS-CoV-2 mutants forms. In the first year of the pandemic, genomic classification of 171,461 genomes showed the presence of five major haplotypes based on nine mutations. The worldwide distribution and the temporal evolution of frequency of these haplotypes was carefully analyzed. All the haplotypes were identified in the six regions analyzed (South America, North America, Europe, Asia, Africa, and Oceania); however, the frequency of each of them was different in each of these regions. As of September 30, 2020, haplotype 3 (or operational taxonomic unit 3, OTU_3) was the most prevalent in four regions (South America, Asia, Africa, and Oceania). OTU_5 was the most prevalent in North America and OTU_2 in Europe. Temporal dynamics of the haplotypes showed that OTU_1 became nearly extinct after 8 months of pandemic (November 2020). Other OTUs are still present in different frequencies all around the world, while currently generating new variants. Based on their temporal dynamics, a classification scheme of 115 SARS-CoV-2 mutations identified from 1,058,020 SARS-COV-2 genomes was also performed. Three types of temporal dynamics of mutations were identified: i) High-Frequency mutations are characterized by a rapid increase in frequency upon its appearance, ii) medium and iii) low-frequency mutations maintain mid or low-frequencies for several months and can be region-specific. Finally, we performed a correlation analysis of the effective reproduction number (Rt) of SARS-CoV-2 harboring the high-frequency mutation N501Y with the level of control measures adopted in specific jurisdictions. We show that Rt is negatively correlated with the level of control measures in eight of the nine countries analyzed. This negative correlation was similar when we analyzed the Rt of SARS-CoV-2 not-harboring N501Y. Thus, the control measures likely diminish the Rt of both SARSCoV-2 wild-type and N501Y

O presente trabalho está dividido em três capítulos sobre linhas de pesquisa diferentes desenvolvidas pelo autor durante o período de doutorado No primeiro capítulo, são apresentados estudos relacionados ao reconhecimento estrutural de substratos e análise enzimática de domínios GGDEF com atividade diguanilato ciclase (EC 2.7.7.65). As proteínas contendo domínios GGDEF estão relacionados à produção enzimática do segundo mensageiro c-di-GMP, a partir de duas moléculas de GTP, em procariotos. Esta molécula está principalmente envolvida na transição entre os estilos de vida móveis e sésseis, bem como vários outros fenótipos. Redundância e diversidade de sequências de domínio GGDEF aumentam a possibilidade de que outras funções enzimáticas ainda possam ser descobertas. Para testar esta hipótese, i) o efeito de mutações pontuais na estrutura e atividade enzimática dos domínios GGDEF é analisado, ii) a especificidade enzimática de domínios GGDEF de enzimas diferentes também é testada e iii) quando produtos não canônicos são detectados, modelos enzimáticos são estudados para entender sua produção preferencial. Como resultados mais importantes, sete mutantes do PleD (uma proteína contendo GGDEF) foram construídos e a estrutura cristalográfica de dois delas foi resolvida, mostrando que é improvável que eles liguem à porção guanina em seu sítio ativo. Além disso, cinco mutantes da proteína XAC0610 de Xanthomonas citri foram construídos e sua capacidade de usar ATP ou GTP como substrato foi avaliada. Nenhum desses mutantes foi capaz de usar ATP como substrato. Finalmente, sete outras proteínas contendo GGDEF foram purificadas e sua especificidade enzimática foi avaliada com vários trifosfatos de nucleotídeos. Uma enzima promíscua chamada GSU1658 mostrou produzir c-di-GMP, c-di-AMP, c-di-IMP, c-di-2´dGMP, c-GAMP, cGIMP e c-AIMP. Curiosamente, o XAC0610 foi capaz de reconhecer 2´dGTP como substrato. A análise da cinética enzimática de XAC0610 na presença de 2´dGTP e GTP mostrou a formação preferencial do produto linear híbrido pppGp2´dG. O segundo capítulo aborda estudos sobre o metabolismo do cianeto em Bacillus com foco na cianeto dihidratase de Bacillus safensis. O cianeto é amplamente utilizado nas indústrias devido à sua alta afinidade com os metais. Esta mesma capacidade confere toxicidade potente a este composto. Assim, as indústrias têm que reduzir a concentração de cianeto das águas residuais antes de sua disposição final. Métodos físicos, químicos e biológicos têm sido desenvolvidos para atingir esse objetivo, mas o conhecimento sobre as vias metabólicas e a biologia das enzimas envolvidas na degradação do cianeto ainda é escasso. Aqui, é descrito o isolamento de uma cepa de Bacillus safensis de rejeitos de minas no Peru. A classificação desta cepa foi feita através de uma análise comparativa de 132 core genomes de cepas do grupo de Bacillus pumilus. Em seguida, determinamos que uma cianeto dihidratase (CynD, EC 3.5.5.1) codificada no genoma da cepa isolada era provavelmente a enzima responsável pela degradação do cianeto. A confirmação da atividade degradante de cianeto de CynD desta cepa foi feita por clonagem, expressão e purificação da enzima e realização de caracterização enzimática. O CynD desta cepa é ativo até pH 9 e os padrões de oligomerização analisados por SEC-MALS mostraram que a enzima forma longas estruturas helicoidais em pH 8 e estruturas menores enquanto o pH aumenta. Finalmente, foi demonstrado que a expressão de CynD é fortemente induzida na presença de cianeto. Os últimos dois anos do doutorado foram realizados no contexto da pandemia COVID- 19. Vários laboratórios se dedicaram a gerar conhecimento para ajudar no combate à pandemia. Nesta situação e graças à grande quantidade de dados genômicos disponíveis publicamente, estudos sobre a dinâmica das mutações do SARS-CoV-2 foram realizados. No primeiro ano da pandemia, a classificação genômica de 171.461 genomas mostrou a presença de cinco haplótipos principais com base em nove mutações. A distribuição mundial e a mudança de frequência desses haplótipos foram analisadas cuidadosamente. Todos os haplótipos foram identificados nas seis regiões analisadas (América do Sul, América do Norte, Europa, Ásia, África e Oceania); no entanto, a frequência de cada um deles foi diferente em cada uma dessas regiões. Em 30 de setembro de 2020, o haplótipo 3 (ou unidade taxonômica operacional 3, OTU_3) era o mais prevalente em quatro regiões (América do Sul, Ásia, África e Oceania). OTU_5 foi o mais prevalente na América do Norte e OTU_2 na Europa. A dinâmica temporal dos haplótipos mostrou que OTU_1 parece perto da extinção após 8 meses de pandemia (novembro de 2020). Outros OTUs ainda estão presentes em diferentes frequências em todo o mundo, mesmo atualmente gerando novas variantes. Com base em sua dinâmica temporal, um esquema de classificação de 115 mutações SARS-CoV-2 identificadas a partir de 1.058.020 genomas SARS-COV-2 também foi feito. Três tipos de dinâmica temporal de mutações foram identificados: i) Mutações de alta frequência, ii) mutações de média frequência e iii) mutações de baixa frequência. Finalmente, foi analisada a correlação do número de reprodução efetiva (Rt) do SARS-CoV-2 que contém a mutação de alta frequência N501Y com o nível de medidas de controle, mostrando que seu Rt está negativamente correlacionado com o nível de medidas de controle em oito dos nove países analisados. Esta correlação negativa foi semelhante quando foi analisado o Rt de SARS-CoV-2 sem a mutação N501Y. Assim, as medidas de controle provavelmente diminuirão o Rt de SARS-CoV-2 tipo selvagem e N501Y

Pig Cloning Using Somatic Cell Nuclear Transfer.

Porcine cloning technology can be used to produce progenies genetically identical to the donor cells from high-quality breeding pigs. In addition, genetically modified pigs have been produced by somatic cell nuclear transfer using genetically modified porcine fetal fibroblasts. The method of preparing genetically modified pigs is critical for establishing pig models for human diseases, and for generating donor animals for future xenotransplantation. This chapter describes detailed procedures for generating cloned pigs using fetal fibroblasts as nuclear donors.

Cloning of Monkeys by Somatic Cell Nuclear Transfer.

Somatic cell nuclear transfer (SCNT) is a promising method to establish genetically modified monkeys with identical genetic background as models in biomedical research. We have recently cloned monkeys by optimization of the SCNT protocols and inclusion of the epigenetic modulator. Here, we describe the protocol for generation of cloned monkeys by somatic cell nuclear transfer.

Cell cloning-on-the-spot by using an attachable silicone cylinder.

Cell cloning is a laboratory routine to isolate and keep particular properties of cultured cells. Transfected or other genetically modified cells can be selected by the traditional microbiological cloning. In addition, common laboratory cell lines are prone to genotypic drift during their continual culture, so that supplementary cloning steps are often required to maintain correct lineage phenotypes. Here, we designed a silicone-made attachable cloning cylinder, which facilitated an easy and bona fide cloning of interested cells. This silicone cylinder was easy to make, showed competent stickiness to laboratory plastics including culture dishes, and hence enabled secure isolation and culture for days of selected single cells, especially, on the spots of preceding cell-plating dishes under microscopic examination of visible cellular phenotypes. We tested the silicone cylinder in the monoclonal subcloning from a heterogeneous population of a breast cancer cell line, MDA-MB-231, and readily established independent MDA-MB-231 subclones showing different sublineage phenotypes.

A Novel Method of Somatic Cell Nuclear Transfer with Minimum Equipment.

Somatic cell nuclear transfer (SCNT) is an exceptional experimental biology technique with an arguably great contribution to our current understanding of developmental plasticity. Many students and young researchers are interested in taking advantage of SCNT virtues in their experiments but the cost of micromanipulation microscopes, intensive training programs, and also the sophisticated process of SCNT may dissuade them from entering this amazing field of science. Here, we describe the details of a streamlined manual method of SCNT that can be performed using very basic equipment found in every embryology laboratory: the Pasteur pipette and stereomicroscope. The overall method introduced is very simple and a person with no previous experience in cloning can learn and adopt the basic routines of this technique independently.

¿Un paso adelante hacia la clonación humana con fines terapéuticos? / A step forward in human cloning for therapeutic purposes?

En el presente trabajo se analiza el estado actual de las investigaciones para la obtención de embriones humanos clónicos por transferencia nuclear de células somáticas y de las células troncales embrionarias y su posible utilización con fines terapéuticos. Se analizan algunos aspectos éticos y legales referentes a la obtención y utilización de los embriones humanos clónicos (AU)

Present investigations carried out to produce human embryos by somatic cell nuclear transfer (SCNT embryos) and nuclear transfer human embryo stem cells (NT-ESC) and their use in regenerative medicine are analyzed. Ethical and legal aspects are discussed (AU)

Cloned sheep blastocysts derived from oocytes enucleated manually using a pulled pasteur pipette.

The potential applications of a simplified method of somatic cell nuclear transfer (SCNT) that is improved in both efficiency and throughput is considerable. Technically, a major step of SCNT is to produce large pools of enucleated oocytes (cytoplasts) efficiently, a process that requires considerable micromanipulation skill and expensive equipment. Here, we have developed an efficient and high-throughput method of manual oocyte enucleation using a simple device, a pulled Pasteur pipette, that can be connected to standard zona-free method of embryo reconstitution. Common Pasteur pipettes were pulled on a flame to produce finely drawn pipettes with inner diameters approximately less than half the oocyte diameter (∼50-60 µm), and slightly larger than cytoplasmic protrusion (∼20-30 µm) that was induced after demecolcine treatment of MII-stage oocytes. Oocyte manipulation was performed under a stereomicroscope by either bisecting the oocyte into two approximately equal demioocytes (blind manual enucleation), or by positioning the oocytes so that the cytoplasmic extrusion that contains the MII chromosome mass is removed with the minimum amount of cytoplasm (oriented manual enucleation). The survival rate of the manually enucleated oocytes was 81.4-91.5%, comparable to standard zona-free method of oocyte enucleation (>95%). A total of 80-120 oocytes could be enucleated in 10 min, which was considerably higher than standard zona-free enucleation method. In vitro development rates of cloned embryos derived from manually enucleated cytoplasts with varying cytoplasmic volumes (50%, 95%, and 100%) was comparable, and embryonic developmental rates of the two latter groups were at least as good as standard zona-free method. The manual method of oocyte enucleation described here can be learned and mastered for simple, fast, and cheap production of cloned embryos with comparable efficiency to other available methods.

Improved cloning efficiency and developmental potential in bovine somatic cell nuclear transfer with the oosight imaging system.

In somatic cell nuclear transfer (SCNT) procedures, exquisite enucleation of the recipient oocyte is critical to cloning efficiency. The purpose of this study was to compare the effects of two enucleation systems, Hoechst staining and UV irradiation (hereafter, irradiation group) and Oosight imaging (hereafter, Oosight group), on the in vitro production of bovine SCNT embryos. In the Oosight group, the apoptotic index (2.8 ± 0.5 vs. 7.3 ± 1.2) was lower, and the fusion rate (75.6% vs. 62.9%), cleavage rate (78.0% vs. 63.7%), blastocyst rate (40.2% vs. 29.2%), and total cell number (128.3±4.8 vs. 112.2 ± 7.6) were higher than those in the irradiation group (all p<0.05). The overall efficiency after SCNT was twice as high in the Oosight group as that in the irradiation group (p<0.05). The relative mRNA expression levels of Oct4, Nanog, Interferon-tau, and Dnmt3A were higher and those of Caspase-3 and Hsp70 were lower in the Oosight group compared with the irradiation group (p<0.05). This is the first report to show the positive effect of the Oosight imaging system on molecular gene expression in the SCNT embryo. The Oosight imaging system may become the preferred choice for enucleation because it is less detrimental to the developmental potential of bovine SCNT embryos.

Production of cloned mice from somatic cells, ES cells, and frozen bodies.

Somatic cell nuclear transfer (SCNT) has become a unique and powerful tool for epigenetic reprogramming research and gene manipulation in animals. Although the success rates of somatic cloning have been inefficient and the mechanism of reprogramming is still largely unknown, therefore, the nuclear transfer (NT) method has been thought of as a "black box approach" and inadequate to determine the detail of how genomic reprogramming occurs. However, only the NT approach can reveal dynamic and global modifications in the epigenome without using genetic modification, as well as can create live animals. At present, this is the only technique available for the preservation and propagation of valuable genetic resources from mutant mice that are infertile or too old, or recovered from carcasses, without the use of germ cells. This chapter describes a basic protocol for mouse cloning and embryonic stem (ES) cell establishment from cloned embryo using a piezo-actuated micromanipulator. This technique will greatly help not only in mouse cloning but also in other forms of micromanipulation such as intracytoplasmic sperm injection (ICSI) into oocytes or ES cell injection into blastocysts. In addition, we describe a new, more efficient mouse cloning protocol using histone deacetylase inhibitor (HDACi), which increases the success rates of cloned mice or establish rate of ES cells to fivefold.

[Mystery and problems of cloning].

The attention of investigators is attracted to the fact that, in spite of great efforts in mammalian cloning, advances that have been made in this area of research are not great, and cloned animals have developmental pathologies often incompatible with life and/or reproduction ability. It is yet not clear what technical or biological factors underlie this, and how they are connected or interact with each other, which is more realistic strategically. There is a great number of articles dealing with the influence of cloning with the nuclear transfer on genetic and epigenetic reprogramming of donor cells. At the same time we can see the practical absence of analytical investigations concerning the technology of cloning as such, its weak points, and possible sources of cellular trauma in the course of microsurgery of nuclear transfer or twinning. This article discusses step by step several nuclear transfer techniques and the methods of dividing early preimplanted embryos for twinning with the aim to reveal possible sources of cell damage during micromanipulation that may have negative influence on the development of cloned organisms. Several new author's technologies based on the study of cell biophysical characteristics are described, which allow one to avoid cellular trauma during manipulation and minimize the possibility of cell damage at any rate.

Cloning of ES cells and mice by nuclear transfer.

We have been able to develop a stable nuclear transfer (NT) method in the mouse, in which donor nuclei are directly injected into the oocyte using a piezo-actuated micromanipulator. Although the piezo unit is a complex tool, once mastered it is of great help not only in NT experiments, but also in almost all other forms of micromanipulation. Using this technique, embryonic stem (ntES) cell lines established from somatic cell nuclei can be generated relatively easily from a variety of mouse genotypes and cell types. Such ntES cells can be used not only for experimental models of human therapeutic cloning but also as a means of preserving mouse genomes instead of preserving germ cells. Here, we describe our most recent protocols for mouse cloning.

[Biophysical aspects of reconstruction of a single cell by the methods of cell engineering].

The problems of a low efficiency of mammalian cloning are discussed with emphasis on the necessity of the expertise of each step of single cell reconstruction, beginning with microsurgical manipulations. The fact of cell content leakage when the cell is held during microsurgery or microinjections with the help of the conventional method using negative pressure in the holding micropipette was demonstrated in experiments on murine embryos. It was shown that the rate of cell content efflux depends on the value of negative pressure generated in the holding micropipette, and is directly proportional to the dimensions of its orifice and the duration of micromanipulations. An alternative method of cell fixation using the capillary forces of the holding micropipette was proposed. The method optimizes the process of cell fixation, reducing the holding effort by two orders of magnitude. As a result, 92% of embryos remain viable after fixation of embryo, as compared with 39% in the conventional technique. In order to diminish the cell damage produced by the tip of a microinstrument, a new technique of fabricating micropipettes was proposed. The improved method of filling the micropipette with viscous liquids, including DNA, which is described in details in the paper, enabled constant (non-stop) microinjection of more than 1000 cells by hand, without any special automatic device.

Production of cloned mice by somatic cell nuclear transfer.

Although it has now been 10 years since the first cloned mammals were generated from somatic cells using nuclear transfer (NT), the success rate for producing live offspring by cloning remains < 5%. Nevertheless, the techniques have potential as important tools for future research in basic biology. We have been able to develop a stable NT method in the mouse, in which donor nuclei are directly injected into the oocyte using a piezo-actuated micromanipulator. Although manipulation of the piezo unit is complex, once mastered it is of great help not only in NT experiments but also in almost all other forms of micromanipulation. In addition to this technique, embryonic stem (ES) cell lines established from somatic cell nuclei by NT can be generated relatively easily from a variety of mouse genotypes and cell types. Such NT-ES cells can be used not only for experimental models of human therapeutic cloning but also as a backup of the donor cell's genome. Our most recent protocols for mouse cloning, as described here, will allow the production of cloned mice in > or = 3 months.

Microplate method for obtaining Leishmania clonal populations.

The various clinical expressions observed in human leishmaniases result from complex host-parasite relationships in which the biodiversity of the parasite is a determining factor. Because Leishmania strains isolated from humans are composed of heterogeneous populations, it is crucial to use clonal lineages for studies on the characterization of these parasites. Presently, techniques used for cloning Leishmania spp. parasites are time-consuming and show poor efficiency. Here, a method developed in 96-well microplates is described, which allows one to rapidly obtain numerous clones of Leishmania in the most versatile and efficient way. The technique may be useful for cloning various protozoa as well as Leishmania spp.

Marshall Barber and the century of microinjection: from cloning of bacteria to cloning of everything.

A hundred years ago, Dr. Marshall A. Barber proposed a new technique - the microinjection technique. He developed this method initially to clone bacteria and to confirm the germ theory of Koch and Pasteur. Later on, he refined his approach and was able to manipulate nuclei in protozoa and to implant bacteria into plant cells. Continuous improvement and adaptation of this method to new applications dramatically changed experimental embryology and cytology and led to the formation of several new scientific disciplines including animal cloning as one of its latest applications. Interestingly, microinjection originated as a method at the crossroad of bacteriology and plant biology, demonstrating once again the unforeseen impact that basic research in an unrelated field can have on the development of entirely different disciplines.

A reliable, noninvasive technique for spindle imaging and enucleation of mammalian oocytes.

Factors affecting the efficiency of animal cloning remain to be elucidated. Enucleation of recipient oocytes is a critical step in cloning procedures and typically is performed by aspirating a portion of the cytoplasm underlying the first polar body. Enucleation is evaluated using epifluorescence after Hoechst staining for DNA, which may disrupt functions of the cytoplast, especially mitochondria. Mitochondrial DNA in Dolly and other cloned sheep has been shown to derive exclusively from recipient oocytes. Not only might evaluation of the aspirated karyoplast portion inadequately reflect the state of the cytoplast, it is also time consuming. Here we report a reliable, noninvasive technique for spindle imaging and enucleation of oocytes using a new microscope, the Pol-Scope. The efficiency of enucleation was 100%, and only 5.5% of the oocytes' mitochondria entered the karyoplast upon Pol-Scope-directed removal of the spindle. Moreover, Pol-Scope imaging of spindles and micromanipulation did not compromise the developmental competence of reconstituted oocytes and cytoplasts.

Bovine blastocysts obtained from reconstructed cytoplast and karyoplasts using a simple portable CO2 incubator.

To enable both the multiplication of elite livestock and the engineering of transgenic animals for various agricultural and biochemical purposes, scientists around the world are intensively studying efficient ways of improving developmental competency of bovine embryos reconstructed by somatic cell nuclear transfer. Because it is widely accepted that culture conditions along with many other factors contribute to the developmental competency of reconstructed embryos, this preliminary study was designed to test whether or not bovine reconstructed embryos could develop in vitro using a simple portable CO(2) incubator. CO(2) and O(2) gas tensions and air pressure can be varied using this system. The parameters used in the five conducted trials were low CO(2) (2-5%) and O(2) (8-10%) gas tensions, and negative air pressure (of 300 mm Hg). Chamber temperature was maintained at 38.5 degrees C. Bovine fetal fibroblasts were used as donor karyoplasts and were fused into microsurgically enucleated M II oocytes followed by activation and culture. From the 250 enucleated oocytes, 217 (86.8%) fused, 183 (73.2%) cleaved, and 43 (17.2%) developed to the blastocyst stage. While relatively low developmental rates were achieved, technical proficiency may have been a contributing factor. Further studies using this system are needed to determine optimal levels of O(2), CO(2), and air pressure.