Headspace solid-phase microextraction (HS-SPME) combined with GC-MS as a process analytical technology (PAT) tool for monitoring the cultivation of C. tetani.

Vaccine production is a biological process in which variation in time and output is inevitable. Thus, the application of Process Analytical Technologies (PAT) will be important in this regard. Headspace solid - phase microextraction (HS-SPME) coupled with GC-MS can be used as a PAT for process monitoring. This method is suitable to chemical profiling of volatile organic compounds (VOCs) emitted from microorganisms. Tetanus is a lethal disease caused by Clostridium tetani (C. tetani) bacterium and vaccination is an ultimate way to prevent this disease. In this paper, SPME fiber was used for the investigation of VOCs emerging from C. tetani during cultivation. Different types of VOCs such as sulfur-containing compounds were identified and some of them were selected as biomarkers for bioreactor monitoring during vaccine production. In the second step, the portable dynamic air sampling (PDAS) device was used as an interface for sampling VOCs by SPME fibers. The sampling procedure was optimized by face-centered central composite design (FC-CCD). The optimized sampling time and inlet gas flow rates were 10 min and 2 m L s-1, respectively. PDAS was mounted in exhausted gas line of bioreactor and 42 samples of VOCs were prepared by SPME fibers in 7 days during incubation. Simultaneously, pH and optical density (OD) were evaluated to cultivation process which showed good correlations with the identified VOCs (>80%). This method could be used for VOCs sampling from off-gas of a bioreactor to monitoring of the cultivation process.

Sol-gel-based SPME fiber as a reliable sampling technique for studying biogenic volatile organic compounds released from Clostridium tetani.

A novel and efficient headspace solid-phase microextraction (HS-SPME) method, followed by gas chromatography mass spectrometry (GC-MS), was developed to study volatile organic compounds (VOCs) emerging from microorganisms. Two homemade SPME fibers, a semi-polar poly (dimethylsiloxane) (PDMS) fiber, and a polar polyethylene glycol (PEG) fiber, along with two commercial fibers (PDMS and PDMS/DVB) were used to collect VOCs emerging from Clostridium tetani which was cultured in different media. The adsorbed VOCs were desorbed and identified, in vitro, using GC-MS. The adsorption efficiency was improved by optimizing the time duration of adsorption and desorption. About 50 components were identified by the proposed method. The main detected compounds appeared to be sulfur containing compounds such as butanethioic acid S-methyl ester, dimethyl trisulfide, and dimethyl tetrasulfide. These volatile sulfur containing compounds are derived from amino acids containing the sulfur element, which probably coexist in the mentioned bacterium or are added to the culture media. The developed HS-SPME-GC-MS method allowed the determination of the chemical fingerprint of Clostridium tetani volatile constituents, and thus provides a new, simple, and reliable tool for studying the growth of microorganisms. Graphical abstract Investigation of biogenic VOCs released from Clostridium tetani using SPME-GC-MS.

The combined use of analytical tools for exploring tetanus toxin and tetanus toxoid structures.

Aldehyde detoxification is a process used to convert toxin into toxoid for vaccine applications. In the case of tetanus toxin (TT), formaldehyde is used to obtain the tetanus toxoid (TTd), which is used either for the tetanus vaccine or as carrier protein in conjugate vaccines. Several studies have already been conducted to better understand the exact mechanism of this detoxification. Those studies led to the identification of a number of formaldehyde-induced modifications on lab scale TTd samples. To obtain greater insights of the changes induced by formaldehyde, we used three industrial TTd batches to identify repeatable modifications in the detoxification process. Our strategy was to combine seven analytical tools to map these changes. Mass spectrometry (MS), colorimetric test and amino acid analysis (AAA) were used to study modifications on amino acids. SDS-PAGE, asymmetric flow field flow fractionation (AF4), fluorescence spectroscopy and circular dichroism (CD) were used to study formaldehyde modifications on the whole protein structure. We identified 41 formaldehyde-induced modifications across the 1315 amino acid primary sequence of TT. Of these, five modifications on lysine residues were repeatable across TTd batches. Changes in protein conformation were also observed using SDS-PAGE, AF4 and CD techniques. Each analytical tool brought a piece of information regarding formaldehyde induced-modifications, and all together, these methods provided a comprehensive overview of the structural changes that occurred with detoxification. These results could be the first step leading to site-directed TT mutagenesis studies that may enable the production of a non-toxic equivalent protein without using formaldehyde.

Novel actin-like filament structure from Clostridium tetani.

Eukaryotic F-actin is constructed from two protofilaments that gently wind around each other to form a helical polymer. Several bacterial actin-like proteins (Alps) are also known to form F-actin-like helical arrangements from two protofilaments, yet with varied helical geometries. Here, we report a unique filament architecture of Alp12 from Clostridium tetani that is constructed from four protofilaments. Through fitting of an Alp12 monomer homology model into the electron microscopy data, the filament was determined to be constructed from two antiparallel strands, each composed of two parallel protofilaments. These four protofilaments form an open helical cylinder separated by a wide cleft. The molecular interactions within single protofilaments are similar to F-actin, yet interactions between protofilaments differ from those in F-actin. The filament structure and assembly and disassembly kinetics suggest Alp12 to be a dynamically unstable force-generating motor involved in segregating the pE88 plasmid, which encodes the lethal tetanus toxin, and thus a potential target for drug design. Alp12 can be repeatedly cycled between states of polymerization and dissociation, making it a novel candidate for incorporation into fuel-propelled nanobiopolymer machines.

In silico exploration of novel phytoligands against probable drug target of Clostridium tetani.

Though tetanus is an old disease with well known medicines, its complications are still a serious issue worldwide. Tetanus is mainly due to a powerful neurotoxin, tetanolysin-O, produced by a Gram positive anaerobic bacterium, Clostridium tetani. The toxin has a thiol-activated cytolysin which causes lysis of human platelets, lysosomes and a variety of subcellular membranes. The existing therapy seems to have challenged as available vaccines are not so effective and the bacteria developed resistance to many drugs. Computer aided approach is a novel platform to screen drug targets and design potential inhibitors. The three dimensional structure of the toxin is essential for structure based drug design. But the structure of tetanolysin-O is not available in its native form. Moreover, the interaction and pharmacological activities of current drugs against tetanolysin-O is not clear. Hence, there is need for three dimensional model of the toxin. The model was generated by homology modeling using crystal structure of perfringolysin-O, chain-A (PDB ID: 1PFO) as the template. The modeled structure has 22.7% α helices, 27.51% ß sheets and 41.75% random coils. A thiol-activated cytolysin was predicted in the region of 105 to 1579, which acts as a functional domain of the toxin. The hypothetical model showed the backbone root mean square deviation (RMSD) value of 0.6 Å and the model was validated by ProCheck. The Ramachandran plot of the model accounts for 92.3% residues in the most allowed region. The model was further refined by various tools and deposited to Protein Model Database (PMDB ID: PM0077550). The model was used as the drug target and the interaction of various lead molecules with protein was studied by molecular docking. We have selected phytoligands based on literatures and pharmacophoric studies. The efficiency of herbal compounds and chemical leads was compared. Our study concluded that herbal derivatives such as berberine (7, 8, 13, 13a-tetradehydro-9,10-dimethoxy-2,3 [methylenebis(oxy)] berbinium), curcumin ((1E,6E)-1,7-bis (4-hydroxy-3-methoxyphenyl)-1,6-heptadiene-3,5-dione), coumarin (2H-chromen-2-one), catechol (Benzene-1,2-diol) and diosphenol (2-hydroxy-3-methyl-6-propan-2-ylcyclohex-2-en-1-one) are the best inhibitors compared to known chemicals. Hence, these leads can be used as potential inhibitors against tetanolysin.

A phosphoethanolamine-modified glycosyl diradylglycerol in the polar lipids of Clostridium tetani.

The polar lipids of the anaerobic bacterium Clostridium tetani, the causative agent of tetanus, have been examined by two-dimensional thin layer chromatography, ESI mass spectrometry, and NMR spectroscopy. Plasmalogen and di- and tetra-acylated species of phosphatidylethanolamine, phosphatidylglycerol, cardiolipin, and N-acetylglucosaminyl diradylglycerol were the major lipids present in most strains examined except for strain ATCC 10779, the parent of strain E88, the first C. tetani strain to have its genome sequenced. This strain contained the same di- and tetra-acylated species but did not contain plasmalogens. All strains contained a novel derivative of N-acetylglucosaminyl diradylglycerol in which a phosphoethanolamine unit is attached to the 6'-position of the sugar, as judged by selective 31P-decoupled, 1H-detected NMR difference spectroscopy. The N-acetylglucosamine (GlcNAc) residue is presumably linked to the 3-positon of the diradylglycerol moiety, and it has the beta-anomeric configuration. Very little plasmalogen component was detected by mass spectrometry in the precursors phosphatidic acid and phosphatidylserine, consistent with the idea that plasmalogens are formed from diacylated phospholipids at a late stage of phospholipid assembly in anaerobic clostridia.

Fluorescence emission and polarization for analyzing binding of ruthenium metalloglycocluster to lectin and tetanus toxin C-fragment.

We have designed and synthesized ruthenium complexes bearing clustered galactose Ru(bpy-2Gal)(3) and glucose Ru(bpy-2Glc)(3). Changes in fluorescence emission (FE) and fluorescence polarization (FP) of the metalloglycoclusters were measured by adding each lectin (peanut agglutinin (PNA), Ricinus communis agglutinin 120 (RCA), concanavalin A (ConA), or wheat germ agglutinin (WGA)) or tetanus toxin c-fragment (TCF). Following the addition of PNA and ConA, the FE spectra of Ru(bpy-2Gal)(3) and Ru(bpy-2Glc)(3) showed new emission peaks, respectively. In addition, Ru(bpy-2Gal)(3) and Ru(bpy-2Glc)(3) exclusively increased the FP values by addition of PNA and ConA. Since other combinations of the metalloglycoclusters and lectin caused little change, specific bindings of galactose to PNA and glucose to ConA were confirmed by the FE and FP measurement. From the FP analyses, the dissociation constants (K(d)) of Ru(bpy-2Gal)(3) to PNA and Ru(bpy-2Glc)(3) to ConA were calculated to be ca. 6.1 x 10(-6) M and 1.8 x 10(-5) M. Furthermore, the FP analyses proved specific binding of Ru(bpy-2Gal)(3) to TCF.

Detección inmunoenzimática de la toxina de la bacteria Clostridium tetani: una alternativa a las pruebas biológicas con ratones / Immunoenzimatic detection of the Clostridium tetani bacterial toxin: an alternative to mice bioassays

Cell-free extracts from 20 strains of Clostridium tetani isolated from soil samples, were tested for tetanus toxin production using an enzyme immunoassay. All the extracts were classified as positive for the toxin presence, and eight of them showed absorbance values corresponding to tetanus toxin concentrations between 3.2 and 88 ng/ml; thus, they fell within the linear absorbance range (0.135-0.317). All dilutions of toxin used to obtain the calibration curve (0.0071 to 1.1 ng) were lethal for mice.

[Immunoenzimatic detection of the Clostridium tetani bacterial toxin: an alternative to mice bioassays]. / Detección inmunoenzimática de la toxina de la bacteria Clostridium tetani: una alternativa a las pruebas biológicas con ratones.

Cell-free extracts from 20 strains of Clostridium tetani isolated from soil samples, were tested for tetanus toxin production using an enzyme immunoassay. All the extracts were classified as positive for the toxin presence, and eight of them showed absorbance values corresponding to tetanus toxin concentrations between 3.2 and 88 ng/ml; thus, they fell within the linear absorbance range (0.135-0.317). All dilutions of toxin used to obtain the calibration curve (0.0071 to 1.1 ng) were lethal for mice.

Reversible suppression of glutamatergic neurotransmission of cerebellar granule cells in vivo by genetically manipulated expression of tetanus neurotoxin light chain.

We developed a novel technique that allowed reversible suppression of glutamatergic neurotransmission in the cerebellar network. We generated two lines of transgenic mice termed Tet and TeNT mice and crossed the two transgenic lines to produce the Tet/TeNT double transgenic mice. In the Tet mice, the tetracycline-controlled reverse activator (rtTA) was expressed selectively in cerebellar granule cells by the promoter function of the GABA(A) receptor alpha6 subunit gene. In the TeNT mice, the fusion gene of tetanus neurotoxin light chain (TeNT) and enhanced green fluorescent protein (EGFP) was designed to be induced by the interaction of doxycycline (DOX)-activated rtTA with the tetracycline-responsive promoter. The Tet/TeNT mice grew normally even after DOX treatment and exhibited a restricted DOX-dependent expression of TeNT in cerebellar granule cells. Along with this expression, TeNT proteolytically cleaved the synaptic vesicle protein VAMP2 (also termed synaptobrevin2) and reduced glutamate release from granule cells. Both cleavage of VAMP2/synaptobrevin2 and reduction of glutamate release were reversed by removal of DOX. Among the four genotypes generated by heterozygous crossing of Tet and TeNT mice, only Tet/TeNT mice showed DOX-dependent reversible motor impairments as analyzed with fixed bar and rota-rod tests. Reversible suppression of glutamatergic neurotransmission thus can be manipulated with spatiotemporal accuracy by DOX treatment and removal. These transgenic mice will serve as an animal model to study the cerebellar function in motor coordination and learning.

Characterization of tetanus toxin, neat and in culture supernatant, by electrospray mass spectrometry.

A method was developed for the liquid chromatographic-mass spectrometric (LC-MS) identification of extremely neurotoxic toxins. The method combines sample treatment in a safety containment and analysis of detoxified material in a common laboratory facility. The method was applied to the characterization of neat tetanus toxin and subsequent identification of the toxin in cell lysate supernatants and culture supernatants from different Clostridium tetani bacteria strains. Characterization of the neat toxin was accomplished by (1) accurate mass measurement of enzyme digest fragments of the toxin and (2) tandem mass spectrometric (MS/MS) amino acid sequencing of selected peptides. Accurate mass measurement proved no longer feasible for the analysis of supernatants, due to the overwhelming presence of peptides from proteins other than toxin. Even when high-molecular-weight proteins were filtered from the lysates and treated, the retained protein fraction yielded too many peptides. However, MS/MS could successfully be applied when the findings from the characterization of neat toxin were employed. Thus, LC-MS/MS of selected precursor ions from trypsin digest fragments yielded specific sequence data for identification of the toxin. This procedure provided reliable identification of the toxin at levels above 1 microg/ml and within a day. Investigations with the method developed will be extended to the botulinum neurotoxins.

Structural studies on the zinc-endopeptidase light chain of tetanus neurotoxin.

Tetanus neurotoxin (TeNT) blocks neuroexocytosis via a zinc-endopeptidase activity highly specific for vescicle-associated membrane protein(VAMP)/synaptobrevin. TeNT is the prototype of clostridial neurotoxins, a new family of metalloproteinases. They consist of three domains and the proteolytic activity is displayed by the 50-kDa light chain (L chain). The L chain was isolated here in the native state from bacterial filtrates of Clostridium tetani and its structure was studied via circular dichroism (CD) and fluorescence spectroscopy. The secondary structure content (27% alpha-helix and 43% beta-sheet), estimated by far-ultraviolet CD measurements, was in reasonable agreement with that obtained by standard predictive methods (25% alpha-helix and 49% beta-sheet). Moreover, the hypothetical zinc-binding motif, encompassing residues His-Glu-Leu-Ile-His, was correctly predicted to be in alpha-helical conformation, as also expected on the basis of the geometrical requirements for a correct coordination of the zinc ion. Both near-ultraviolet CD and fluorescence data strongly suggest that the single Trp43 residue is buried and constrained in a hydrophobic environment, likely distant from the zinc ion located in the active-site cleft. The contribution of the bound zinc ion to the overall conformation of TeNT L chain was investigated by different and complementary techniques, including spectroscopic (far- and near-ultraviolet CD, fluorescence, second derivative absorption spectroscopy) as well as proteolytic probes. The results indicate that the zinc ion plays little, if any, role in determining the structural properties of the L chain molecule. Similarly, the metal-free apo-enzyme and the holo-protein share common stability features evaluated in respect to different physico-chemical parameters (pH, temperature and urea concentration). These results parallel those obtained on thermolysin, a zinc-dependent neutral endoprotease from Bacillus thermoproteolyticus, where both conformational and stability properties are unchanged upon zinc removal.

Limited proteolysis of tetanus toxin. Relation to activity and identification of cleavage sites.

Tetanus toxin is synthesized by Clostridium tetani as a 151-kDa peptide chain. The primary gene product is processed post-translationally by removal of the initiating methionine residue, formation of disulfide bridges and limited proteolysis by bacterial or exogenous proteinases. The mature toxins consist of a 52-kDa light chain and a 98-kDa heavy chain, linked together by a disulfide bond. Proteolytic nicking is accompanied by increased pharmacological potency. To identify the structural alterations involved, single-chain toxin has been subjected to limited proteolysis with various enzymes. The new N-termini have been determined by Edman degradation and the C-termini by isolation of short C-terminal peptide fragments and subsequent analysis of the sequence and composition. All two-chain toxins result from proteolytic nicking within the 17-residue segment of residues 445-461. Thus, the protease(s) of the culture broth cleave on the C-terminal side of Glu449 and partially Ala456, giving rise to two heavy chain N-termini. Trypsin and clostripain first attack the C-terminal of Arg454 and later Arg448, whereas endoproteinase Arg-C cleaves the former bond only. Chymotrypsin and endoproteinase Glu-C each split a single peptide bond, i.e. that located after Tyr452 and Glu449, respectively. Papain gives rise to a large number of cleavages within the 17-residue segment, the new C-terminus being Thr445 or Asn446 and the new N-terminus being Asp460 or Leu461. Further papain digestion leads to an additional cleavage within the heavy chain between Ser863 and Lys864. The original N-terminal Pro1 and C-terminal Asp1314, predicted from the nucleotide sequence, are conserved in all proteolytic digests. The pharmacological activity of the various two-chain toxins was 5-11 times that of the single-chain toxin, as estimated from the inhibition of [3H]noradrenaline release from rat-brain homogenate. The present data on the processing and activation by limited proteolysis prove the existence of several active tetanus isotoxins. These data, together with our previous data on the localization of disulfide bridges and sulfhydryl groups (Krieglstein, K., Henschen, A., Weller, U. & Habermann, E. (1990) Eur. J. Biochem. 188, 39-45), provide the detailed protein chemical characterization of the tetanus isotoxins.

S layer protein of Clostridium tetani: purification and properties.

S layer protein of Clostridium tetani strain AO 174, a nontoxigenic derivative of strain Harvard A 47, was prepared from the cell walls by 4 M urea extraction and purified by DEAE-Sepharose CL-6B chromatography followed by a combination of anion-exchange chromatography and reverse-phase chromatography using an HPLC system. The molecular weight of the S layer protein was estimated to be 140 kilodaltons (kDa) by SDS-PAGE. The amino acid composition of the 140 kDa protein was very similar to those of S layer proteins from the other bacterial species: it was rich in acidic amino acid and lacked cysteine. Also, the protein was unique in its extremely low content of proline (0.02 to 0.03 mol%). Multiple isoelectric forms ranging from pH 4.0 to 4.5 were observed in the purified preparation. Immunodiffusion analysis showed that the 140 kDa protein was a common antigen to the three strains of C. tetani tested.