Insights into the effect of artificial sweeteners on the structure, stability, and fibrillation of type I collagen.

Artificial sweeteners (AS) are widely used as sugar substitutes because natural sweetener (sugar) leads to a number of health issues, including diabetes, obesity, and tooth decay. Since natural sugar (sucrose), diabetes and skin are highly interlinked, and also sucrose is known to inhibit the fibrillation of collagen, the major protein of the skin, a study on the impact of AS on collagen is important and essential. Herein, we have studied the influence of commonly used AS such as Sucralose (SUC), Aspartame (APM), and Saccharin (SAC) on the structure, stability, and fibrillation of collagen using various spectroscopic methods. The circular dichroism and turbidity results suggest that the AS does not disrupt the triple helix structure and also the fibrillar property of collagen, respectively. The fibrillar morphology was sustained, although there was a trivial difference in the entanglement of fibrils in the presence of SAC, compared to native collagen fibrils. The thermal stability of collagen is maintained in the presence of AS. Fluorescence and STD-NMR results indicate that the interaction between AS and collagen was weak, which supports the intact structure, stability, and fibrillation property of collagen. The current study thus suggests that the chosen AS does not influence collagen properties.

Artificially modified collagen fibril orientation affects leather tear strength.

BACKGROUND: Ovine leather has around half the tear strength of bovine leather and is therefore not suitable for high-value applications such as shoes. Tear strength has been correlated with the natural collagen fibril alignment (orientation index, OI). It is hypothesized that it could be possible to artificially increase the OI of the collagen fibrils and that an artificial increase in OI could increase tear strength. RESULTS: Ovine skins, after pickling and bating, were strained biaxially during chrome tanning. The strain ranged from 2 to 15% of the initial sample length, either uniformly in both directions by 10% or with 3% in one direction and 15% in the other. Once tanned, the leather tear strengths were measured and the collagen fibril orientation was measured using synchrotron-based small-angle X-ray scattering. CONCLUSION: The OI increased as a result of strain during tanning from 0.48 to 0.79 (P = 0.001) measured edge-on and the thickness-normalized tear strength increased from 27 to 43 N mm-1 (P < 0.001) after leather was strained 10% in two orthogonal directions. This is evidence to support a causal relationship between high OI (measured edge-on), highly influenced by thickness, and tear strength. It also provides a method to produce stronger leather. © 2017 Society of Chemical Industry.

A quantitative comparison of morphological and histological characteristics of collagen in the rabbit medial collateral ligament.

Collagen fiber is one of the critical factors in determining mechanical properties of ligaments and both the morphological and histological characteristics of collagen have been widely studied. However, there was still no consensus about whether the morphological characteristics of collagen correlated with its histological characteristics in physiological ligaments. Rabbit medial collateral ligaments (MCLs) were measured under a transmission electron microscope and a polarized light microscope plus picrosirius red-staining to obtain the distributions of collagen fibril diameters and types at different anatomical sites of rabbit MCLs, respectively. The correlation between the fibril diameter and type was determined by a correlation analysis. The collagen fibril diameters at the different anatomical sites had different distributions (unimodal or bimodal) and mean fibril diameters were found to increase significantly from the anterior part to the posterior part (P=0.0482) as well as from the proximal to the distal sections (P=0.0208). Type I collagen in the core portion of MCLs was significantly less than at the other four peripheral areas (P<0.005) but no significant variation was found in each respective portion (P>0.05). The low coefficient in the correlation analysis (r=0.3759) demonstrated collagen fibril diameters had no correlation with collagen types. This may provide a new view of collagen types in studying the mechanical behavior of ligaments.

Murine tendon function is adversely affected by aggrecan accumulation due to the knockout of ADAMTS5.

The present study examined the effect of ADAMTS5 (TS5) knockout on the properties of murine flexor digitorum longus (FDL) and Achilles tendons. FDL and Achilles tendons were analyzed using biomechanical testing, histology, and immunohistochemistry; further characterization of FDL tendons was conducted using transmission electron microscopy (collagen fibril ultrastructure), SDS-PAGE (collagen content and type), fluorescence-assisted carbohydrate electrophoresis for chondroitin sulfate and hyaluronan, and Western blotting for aggrecan, versican, and decorin abundance and distribution. FDL tendons of TS5(-/-) mice showed a 33% larger cross-sectional area, increased collagen fibril area fraction, and decreased material properties relative to those of wild type mice. In TS5(-/-) mice, aggrecan accumulated in the pericellular matrix of tendon fibroblasts. In Achilles tendons, cross-sectional area, stress relaxation, and structural properties were similar in TS5(-/-) and wild type mice; however, the TS5(-/-) tendons exhibited a higher tensile modulus and a weakened enthesis. These results demonstrate that TS5 deficiency disturbs normal tendon collagen organization and alters biomechanical properties. Hence, the role of ADAMTS5 in tendon is to remove pericellular and interfibrillar aggrecan to maintain the molecular architecture responsible for normal tissue function.

Mechanisms of collagen fibril alignment in tendon injury: from tendon regeneration to artificial tendon.

The process by which collagen fibrils are aligned following tendon injury remains unknown. Therefore, we analyzed the process of tendon regeneration by transmission electron microscopy, using a film model method. In mice, the Achilles tendon of medial head was transected. On day 3, after only the proximal end of the transected tendon was placed on film and kept in vivo, a translucent substance containing granules, called tendon gel, was secreted. On day 5, the granules assembled in a loose (L) layer, and coalesced tightly in a dense (D) layer, forming an L-D-L layered pattern. On day 10, granules showed high electron density in H layers, which developed into D-H-D layers on day 13. The distal end was placed on film to face the proximal end. On day 10, the tendon gel showed a D-H-D layer pattern. On day 11, mechanical stress from muscular constriction changed the tendon gel to aligned collagen fibrils (6 ± 2 nm in diameter). Thereafter, the diameter of the fibrils increased. Tendon gel harvested on day 5 or day 10 was pulled manually or by hanging weights (about 0.6 MPa). Aligned collagen fibrils (32 ± 7 nm in diameter) were created by traction using tendon gel harvested on day 10.

Practical considerations in the use of polarized light microscopy in the analysis of the collagen network in articular cartilage.

Polarized light microscopy is a traditional method for visualizing the collagen network architecture of articular cartilage. Articular cartilage repair and tissue engineering studies have raised new demands for techniques capable of quantitative characterization of the scar and repair tissues, including properties of the collagen network. Modern polarized light microscopy can be used to measure collagen fibril orientation, parallelism, and birefringence. New commercial instruments are computer controlled and the measurements are easy to perform. However, often the interpretation of results causes difficulties, even errors, because the theoretical aspects of the technique are demanding. The aim of this study was to describe the instrumentation and properties of a modern polarized light microscope, to point out some sources of error in the interpretation of the results, and to recall the theoretical background of the polarized light microscopy.

Crimp morphology in relaxed and stretched rat Achilles tendon.

Fibrous extracellular matrix of tendon is considered to be an inextensible anatomical structure consisting of type I collagen fibrils arranged in parallel bundles. Under polarized light microscopy the collagen fibre bundles appear crimped with alternating dark and light transverse bands. This study describes the ultrastructure of the collagen fibrils in crimps of both relaxed and in vivo stretched rat Achilles tendon. Under polarized light microscopy crimps of relaxed Achilles tendons appear as isosceles or scalene triangles of different size. Tendon crimps observed via SEM and TEM show the single collagen fibrils that suddenly change their direction containing knots. The fibrils appear partially squeezed in the knots, bent on the same plane like bayonets, or twisted and bent. Moreover some of them lose their D-period, revealing their microfibrillar component. These particular aspects of collagen fibrils inside each tendon crimp have been termed 'fibrillar crimps' and may fulfil the same functional role. When tendon is physiologically stretched in vivo the tendon crimps decrease in number (46.7%) (P<0.01) and appear more flattened with an increase in the crimp top angle (165 degrees in stretched tendons vs. 148 degrees in relaxed tendons, P<0.005). Under SEM and TEM, the 'fibrillar crimps' are still present, never losing their structural identity in straightened collagen fibril bundles of stretched tendons even where tendon crimps are not detectable. These data suggest that the 'fibrillar crimp' may be the true structural component of the tendon crimp acting as a shock absorber during physiological stretching of Achilles tendon.

Articular cartilage collagen: an irreplaceable framework?

Adult articular cartilage by dry weight is two-thirds collagen. The collagen has a unique molecular phenotype. The nascent type II collagen fibril is a heteropolymer, with collagen IX molecules covalently linked to the surface and collagen XI forming the filamentous template of the fibril as a whole. The functions of collagens IX and XI in the heteropolymer are far from clear but, evidently, they are critically important since mutations in COLIX and COLXI genes can result in chondrodysplasia syndromes. Here we review what is known of the collagen assembly and present new evidence that collagen type III becomes covalently added to the polymeric fabric of adult human articular cartilage, perhaps as part of a matrix repair or remodelling process.

Ultrastructure of the reticular basement membrane in asthmatic adults, children and infants.

Reticular basement membrane (RBM) thickening in asthma is considered to be the result of subepithelial fibrosis. Thus, the RBM in asthma should contain an excess of fibrils identified as interstitial collagen and the ratio of fibril to matrix should be increased above normal levels. Electron micrographs of the RBM were compared with those of interstitial collagen deeper in the bronchial wall using endobronchial biopsy specimens from adult asthmatics (aged 18-41 yrs (n = 10)), children with difficult asthma (aged 6-16 yrs (n = 10)), wheezy infants with reversible airflow limitation (aged 0.3-2 yrs (n = 10)) and age-matched nonasthmatic controls: 10 adults, nine children and nine symptomatic infants with normal lung function. Fibrils in the RBM were significantly thinner (median (range) width 39 (30-52) nm versus 59 (48-73) nm), and fewer fibrils were banded than in the interstitial collagen (ratio of banded to non-banded fibrils 0.08 (0-0.17) versus 0.22 (0-1.3)). The ratio of fibrils to matrix in the thickened RBM of asthmatics did not differ from that of their respective controls (1.34 (0.63-2.49) versus 1.18 (0.31-2.6)). The ratio of fibril to matrix in the thickened reticular basement membrane of asthmatics is normal, and, contrary to what is expected in fibrosis, the fibrils do not resemble those of interstitial collagen.

Single amino acid substitutions in procollagen VII affect early stages of assembly of anchoring fibrils.

Procollagen VII is a homotrimer of 350-kDa pro-alpha1(VII) chains, each consisting of a central collagenous domain flanked by the noncollagenous N-terminal NC1 domain and the C-terminal NC2 domain. After secretion from cells, procollagen VII molecules form anti-parallel dimers with a C-terminal 60-nm overlap. Characteristic alignment of procollagen VII monomers forming a dimer depends on site-specific binding between the NC2 domain and the triple-helical region adjacent to Cys-2634 of the interacting procollagen VII molecules. Formation of the intermolecular disulfide bonds between Cys-2634 and either Cys-2802 or Cys-2804 is promoted by the cleavage of the NC2 domain by procollagen C-proteinase. By employing recombinant procollagen VII variants harboring G2575R, R2622Q, or G2623C substitutions previously disclosed in patients with dystrophic epidermolysis bullosa, we studied how these amino acid substitutions affect intermolecular interactions. Binding assays utilizing an optical biosensor demonstrated that the G2575R substitution increased affinity between mutant molecules. In contrast, homotypic binding between the R2622Q or G2623C molecules was not detected. In addition, kinetics of heterotypic binding of all analyzed mutants to wild type collagen VII were different from those for binding between wild type molecules. Moreover, solid-state binding assays demonstrated that R2622Q and G2623C substitutions prevent formation of stable assemblies of procollagen C-proteinase-processed mutants. These results indicate that single amino acid substitutions in procollagen VII alter its self-assembly and provide a basis for understanding the pathomechanisms leading from mutations in the COL7A1 gene to fragility of the dermal-epidermal junction seen in patients with dystrophic forms of epidermolysis bullosa.

[Three-dimensional structure of collagen fibril of pigskin].

OBJECTIVE: To probe deply into the three-dimensional structure of pigskin collagen fibril and provide the basic data for using the pigskin tissue as tissue engineering material. METHODS: Scanning Probe Microscope (SPM) and Transmission Electron Microscope (TEM) were employed to study the three-dimensional structure of collagen fibril in pigskin tissue. RESULTS: Microscopy revealed that pigskin collagen fibril had periodic transverse groove (i.e. D-periodicity) which was about 67 nm. The diameter of fibril ranged from 57 to 135 nm, showing much difference among the papillary layer, reticular layer and infra-reticular layer. The length of fibril varied from 5 to 13 microns. Both ends of fibril were rotund and slightly bulgy. The fibrils assembled and the D-periodicities were homologous in flank. In axial direction fibrils were found staggered end by end. CONCLUSION: The data obtained in this study on the three-dimensional structure of pigskin collagen fibril are of significance to researches in tissue engineering materials.