The perils of poly- and perfluorinated chemicals on the reproductive health of humans, livestock, and wildlife.

Poly- and perfluoroalkyl substances (PFAS) are a prominent class of persistent synthetic compound. The widespread use of these substances in various industrial applications has resulted in their pervasive contamination on a global scale. It is therefore concerning that PFAS have a propensity to accumulate in bodily tissues whereupon they have been linked with a range of adverse health outcomes. Despite this, the true extent of the risk posed by PFAS to humans, domestic animals, and wildlife remains unclear. Addressing these questions requires a multidisciplinary approach, combining the fields of chemistry, biology, and policy to enable meaningful investigation and develop innovative remediation strategies. This article combines the perspectives of chemists, soil scientists, reproductive biologists, and health policy researchers, to contextualise the issue of PFAS contamination and its specific impact on reproductive health. The purpose of this article is to describe the challenges associated with remediating PFAS-contaminated soils and waters and explore the consequences of PFAS contamination on health and reproduction. Furthermore, current actions to promote planetary health and protect ecosystems are presented to instigate positive social change among the scientific community.

Source identification and driving factor apportionment for soil potentially toxic elements via combining APCS-MLR, UNMIX, PMF and GDM.

The contamination and quantification of soil potentially toxic elements (PTEs) contamination sources and the determination of driving factors are the premise of soil contamination control. In our study, 788 soil samples from the National Agricultural Park in Chengdu, Sichuan Province were used to evaluate the contamination degree of soil PTEs by pollution factors and pollution load index. The source identification of soil PTEs was performed using positive matrix decomposition (PMF), edge analysis (UNMIX) and absolute principal component score-multiple line regression (APCS-MLR). The geo-detector method (GDM) was used to analysis drivers of soil PTEs pollution sources to help interpret pollution sources derived from receptor models. Result shows that soil Cu, Pb, Zn, Cr, Ni, Cd, As and Hg average content were 35.2, 32.3, 108.9, 91.9, 37.1, 0.22, 9.76 and 0.15 mg/kg in this study area. Except for As, all are higher than the corresponding soil background values in Sichuan Province. The best performance of APCS-MLR was determined by comparison, and APCS-MLR was considered as the preferred receptor model for soil PTEs source distribution in the study area. ACPS-MLR results showed that 82.70% of Cu, 61.6% of Pb, 75.3% of Zn, 91.9% of Cr and 89.4% of Ni came from traffic-industrial emission sources, 60.9% of Hg came from domestic-transportation emission sources, 57.7% of Cd came from agricultural sources, and 89.5% of As came from natural sources. The GDM results showed that distance from first grade highway, population, land utilization and total potassium (TK) content were the main driving factors affecting these four sources, with q values of 0.064, 0.048, 0.069 and 0.058, respectively. The results can provide reference for reducing PTEs contamination in farmland soil.

Soil pollution indices and health risk assessment of metal(loid)s in the agricultural soil of pistachio orchards.

Elevated levels of metal(loid)s in soil may pose potential threats to the ecosystem and can be harmful for human health. The concentrations of As, Cd, Pb, Cr and Ni were determined in agricultural soil collected from 45 pistachio orchards around Feizabad city, Khorasan Razavi province, Iran using ICP-OES. Also, soil pollution indices including contamination factor (CF), pollution load index (PLI) and geo-accumulation index (Igeo) were evaluated. In addition, non-carcinogenic and carcinogenic risk indices were estimated. The mean concentrations of metal(loid)s were in the order of Ni = 466.256 > Cr = 120.848 > Pb = 12.009 > As = 5.486 > Cd = 0.394 mg/kg. Concentrations of As, Cd and Pb in the soil samples were within their respective permissible limits set by World Health Organization (WHO). But concentrations of Cr and Ni in 84.4 and 100% of the samples, respectively exceeded the WHO allowable limits. The CF, PLI and Igeo showed that soil of some of the pistachio orchards was contaminated with some metals. The possible sources of the metals in the soil are application of pesticides, chemical fertilizers, manures as well as irrigation water. Hazard quotient (HQ) ad Hazard index (HI) values from soil of all the orchards were found to be well below the respective threshold limit (1), suggesting that there is no immediate non-cancer threat arising from the contamination at all the orchards with metal(loid)s for children and adults. The highest cancer risk values (1.13E-02 for children and 1.25E-03 for adults) were estimated for Ni in the soil. Collectively, this study provides valuable information to improve the soil in the pistachio orchards to reduce metal(loid)s contamination and minimize the associated health risks to the population in the area.

Persistent pollution of genetic materials in a typical laboratory environment.

From the onset of coronavirus disease (COVID-19) pandemic, there are concerns regarding the disease spread and environmental pollution of biohazard since studies on genetic engineering flourish and numerous genetic materials were used such as the nucleic acid test of the severe acute respiratory syndrome coronavirus (SARS-CoV-2). In this work, we studied genetic material pollution in an institute during a development cycle of plasmid, one of typical genetic materials, with typical laboratory settings. The pollution source, transmission routes, and pollution levels in laboratory environment were examined. The Real-Time quantitative- Polymerase Chain Reaction results of all environmental mediums (surface, aerosol, and liquid) showed that a targeted DNA segment occurred along with routine experimental operations. Among the 79 surface and air samples collected in the genetic material operation, half of the environment samples (38 of 79) are positive for nucleic acid pollution. Persistent nucleic acid contaminations were observed in all tested laboratories and spread in the public area (hallway). The highest concentration for liquid and surface samples were 1.92 × 108 copies/uL and 5.22 × 107 copies/cm2, respectively. Significant amounts of the targeted gene (with a mean value of 74 copies/L) were detected in the indoor air of laboratories utilizing centrifuge devices, shaking tables, and cell homogenizers. Spills and improper disposal of plasmid products were primary sources of pollution. The importance of establishing designated experimental zones, employing advanced biosafety cabinets, and implementing highly efficient cleaning systems in laboratories with lower biosafety levels is underscored. SYNOPSIS: STATEMENT. Persistent environmental pollutions of genetic materials are introduced by typical experiments in laboratories with low biosafety level.

Analysis of heavy metal and polycyclic aromatic hydrocarbon pollution characteristics of a typical metal rolling industrial site based on data mining.

With the transformation and upgrading of industries, the environmental problems caused by industrial residual contaminated sites are becoming increasingly prominent. Based on actual investigation cases, this study analyzed the soil pollution status of a remaining sites of the copper and zinc rolling industry, and found that the pollutants exceeding the screening values included Cu, Ni, Zn, Pb, total petroleum hydrocarbons and 6 polycyclic aromatic hydrocarbon monomers. Based on traditional analysis methods such as the correlation coefficient and spatial distribution, combined with machine learning methods such as SOM + K-means, it is inferred that the heavy metal Zn/Pb may be mainly related to the production history of zinc rolling. Cu/Ni may be mainly originated from the production history of copper rolling. PAHs are mainly due to the incomplete combustion of fossil fuels in the melting equipment. TPH pollution is speculated to be related to oil leakage during the industrial use period and later period of vehicle parking. The results showed that traditional analysis methods can quickly identify the correlation between site pollutants, while SOM + K-means machine learning methods can further effectively extract complex hidden relationships in data and achieve in-depth mining of site monitoring data.

Does green investment affect environment pollution: Evidence from asymmetric ARDL approach?

Pollution in the environment is today the biggest issue facing the globe and the main factor in the development of many fatal diseases. The main objective of the study to investigate green investments, economic growth and financial development on environmental pollution in the G-7 countries. This study used annual penal data from 1997 to 2021. The panel NARDL (Non-linear autoregressive distributed lag) results affirm that the positive change of green investment and negative shock in green investment have a significant and positive association with environment pollution in G-7 nations. Our findings provide more evidence for the long-term asymmetry between financial development and environmental performance. However, the findings confirm that a positive modification in financial development has a positive and significant effect on environment pollution. Whereas negative shock in financial development is negative and insignificant relationship with environment pollution. Moreover, the outcomes of the study reveal that both positive shock in gross domestic product growth and negative shock of economic growth have a significant and positive link with environment pollution in G-7 countries. According to the findings, by lowering carbon dioxide emissions, green investments reduced environmental pollution in the G-7 nations over the long and short term. Moreover, it is an innovative research effort that provides light on the connection between green investments, financial development, and the environment while making mention to the EKC in G-7 countries. After all these, our recommendation is to increases green investment expenditures to reduce environmental pollution in the G-7 nations based on our findings. Additionally, one important way for the nation to achieve its sustainable development goals is to improve advancements in the financial sector.

Evaluation the impact of electricity consumption on China's air pollution at the provincial level.

As the world's largest electricity-consuming country, China faces the challenge of energy conservation and environmental pollution. Therefore, it is imperative that China takes decisive action to address these issues. Based on the panel data of 30 provinces (cities, districts) in China from 2011 to 2020, we use the entropy method to measure the air pollution index in different provinces, construct two fixed effects models, panel quantile model, and spatial Durbin model to empirically analyze the impact of electricity consumption on air pollution in China's provincial regions. The experimental results show that: (1) Electricity consumption has a significant positive impact on the provincial air pollution index in China and the higher the index is, the more serious the air pollution is. When the electricity consumption increases 1%, the air pollution index will increase of by 0.0649% as accompanied. (2) Through comparison of different times, we found that the degree of increase in air pollution index caused by electricity consumption would be reduced due to the improvement of environmental protection efforts. From the perspective of different geographical locations, the electricity consumption in the southeast side of the "Hu Line" has exacerbated the impact on air pollution index. (3) According to the panel quantile regression results, the marginal effect of electricity consumption on air pollution is positive. With the increase of quantiles, the impact of electricity consumption on air pollution is increasing. (4) Spatial effect analysis shows that electricity consumption has a significant positive spatial spillover effect on air pollution index. The increase in electricity consumption not only increases the air pollution index in the local region, but also leads to an increase in the air pollution index in surrounding areas. These findings contribute to the governance of air pollution and the promotion of sustainable economic, environmental and energy development.

Revisiting the relationship between natural resources and environmental quality- can ICT break the "resource curse" in the environment?

Despite the prevalence of discussions on the "resource curse", the impact of natural resources on environmental quality for better or for worse has not been clearly answered, this study aims to answer the question by introducing the role of Information and Communication Technologies (ICT). To that end, by using the Instrumental Variable Generalized Method of Moments (IV GMM) estimator and a sample of 102 developing and emerging economies from 2006 to 2016, this paper studies the impact of ICT on the relationship between natural resources and environmental quality. Specially, the Environmental Performance Index (EPI) captures the environmental quality. The results show that natural resources have a significant negative effect on EPI, specially, EPI decreases by one unit with a 1% increase in natural resource rents. ICT significantly mitigates this adverse effect, and marginal effects analysis further confirms its positive moderate effects. The results proved to be robust by Lewbel 2SLS and Driscoll-Kraay techniques or other robust tests. It is noteworthy that the adverse effect of natural resources on EPI is greater and the mitigating effect of ICT is more pronounced in low-income countries and lower-middle income countries. Overall, these results remind resource-based countries to vigorously develop ICT, and apply intelligent exploration, digital monitoring, or other digital technologies to realize the high-efficiency use of natural resources, reducing environmental pollution and ecological damage.

Mitigating heavy metal accumulation in tobacco: Strategies, mechanisms, and global initiatives.

The threat of heavy metal (HM) pollution looms large over plant growth and human health, with tobacco emerging as a highly vulnerable plant due to its exceptional absorption capacity. The widespread cultivation of tobacco intensifies these concerns, posing increased risks to human health as HMs become more pervasive in tobacco-growing soils globally. The absorption of these metals not only impedes tobacco growth and quality but also amplifies health hazards through smoking. Implementing proactive strategies to minimize HM absorption in tobacco is of paramount importance. Various approaches, encompassing chemical immobilization, transgenic modification, agronomic adjustments, and microbial interventions, have proven effective in curbing HM accumulation and mitigating associated adverse effects. However, a comprehensive review elucidating these control strategies and their mechanisms remains notably absent. This paper seeks to fill this void by examining the deleterious effects of HM exposure on tobacco plants and human health through tobacco consumption. Additionally, it provides a thorough exploration of the mechanisms responsible for reducing HM content in tobacco. The review consolidates and synthesizes recent domestic and international initiatives aimed at mitigating HM content in tobacco, delivering a comprehensive overview of their current status, benefits, and limitations.

Ozone pollution contributes to the yield gap for beans in Uganda, East Africa, and is co-located with other agricultural stresses.

Air quality negatively impacts agriculture, reducing the yield of staple food crops. While measured data on African ground-level ozone levels are scarce, experimental studies demonstrate the damaging impact of ozone on crops. Common beans (Phaseolus vulgaris), an ozone-sensitive crop, are widely grown in Uganda. Using modelled ozone flux, agricultural surveys, and a flux-effect relationship, this study estimates yield and production losses due to ozone for Ugandan beans in 2015. Analysis at this scale allows the use of localised data, and results can be presented at a sub-regional level. Soil nutrient stress, drought, flood risk, temperature and deprivation were also mapped to investigate where stresses may coincide. Average bean yield losses due to ozone were 17% and 14% (first and second growing season respectively), equating to 184 thousand tonnes production loss. However, for some sub-regions, losses were up to 27.5% and other crop stresses also coincided in these areas. This methodology could be applied widely, allowing estimates of ozone impact for countries lacking air quality and/or experimental data. As crop productivity is below its potential in many areas of the world, changing agricultural practices to mitigate against losses due to ozone could help to reduce the crop yield gap.

Major influencing factors identification and probabilistic health risk assessment of soil potentially toxic elements pollution in coal and metal mines across China: A systematic review.

Deposition of potentially toxic elements (PTEs) in soils due to different types of mining activities has been an increasingly important concern worldwide. Quantitative differences of soil PTEs contamination and related health risk among typical mines remain unclear. Herein, data from 110 coal mines and 168 metal mines across China were analyzed based on 265 published literatures to evaluate pollution characteristics, spatial distribution, and probabilistic health risks of soil PTEs. The results showed that PTE levels in soil from both mine types significantly exceeded background values. The geoaccumulation index (Igeo) revealed metal-mine soil pollution levels exceeded those of coal mines, with average Igeo values for Cd, Hg, As, Pb, Cu, and Zn being 3.02-15.60 times higher. Spearman correlation and redundancy analysis identified natural and anthropogenic factors affecting soil PTE contamination in both mine types. Mining activities posed a significant carcinogenic risk, with metal-mine soils showing a total carcinogenic risk an order of magnitude higher than in coal-mine soils. This study provides policymakers a quantitative foundation for developing differentiated strategies for sustainable remediation and risk-based management of PTEs in typical mining soils.

Assessment of the stabilization effect of ferrous sulfate for arsenic-contaminated soils based on chemical extraction methods and in vitro methods: Methodological differences and linkages.

Stabilization of arsenic-contaminated soils with ferrous sulfate has been reported in many studies, but there are few stabilization effects assessments simultaneously combined chemical extraction methods and in vitro methods, and further explored the corresponding alternative relationships. In this study, ferrous sulfate was added at FeAs molar ratio of 0, 5, 10 and 20 to stabilize As in 10 As spiked soils. Stabilization effects were assessed by 6 chemical extraction methods (toxicity characteristic leaching procedures (TCLP), HCl, diethylenetriamine pentaacetic acid (DTPA), CaCl2, CH3COONH4, (NH4)2SO4), and 4 in vitro methods (physiologically based extraction test (PBET), in vitro gastrointestinal method (IVG), Solubility Bioaccessibility Research Consortium (SBRC) method, and the Unified Bioaccessibility Research Group of Europe method (UBM)). The results showed that the HCl method provides the most conservative assessment results in non-calcareous soils, and in alkaline calcareous soils, (NH4)2SO4 method provides a more conservative assessment. In vitro methods provided significantly higher As concentrations than chemical extraction methods. The components of the simulated digestion solution as well as the parameters may have contributed to this result. The small intestinal phase of PBET and SBRC method produced the highest and lowest ranges of As concentrations, and in the range of 127-462 mg/kg and 68-222 mg/kg when the FeAs molar ratio was 5. So the small intestinal phase of PBET method may provide the most conservative assessment results, while the same phase of SBRC may underestimate the human health risks of As in stabilized soil by 51 %(at a FeAs molar ratio of 5). Spearman correlation analysis indicated that the small intestinal phase of PBET method correlated best with HCl method (correlation coefficient: 0.71). This study provides ideas for the assessment of stabilization efforts to ensure that stabilization meets ecological needs while also being less harmful to humans.

Temporal evolution of plastic additive contents over the last decades in two major European rivers (Rhone and Rhine) from sediment cores analyses.

Although global plastic distribution is at the heart of 21st century environmental concerns, little information is available concerning how organic plastic additives contaminate freshwater sediments, which are often subject to strong anthropogenic pressure. Here, sediment core samples were collected in the Rhone and the Rhine watersheds (France), dated using 137Cs and 210Pbxs methods and analysed for nine phthalates (PAEs) and seven organophosphate esters (OPEs). The distribution of these organic contaminants was used to establish a chronological archive of plastic additive pollution from 1860 (Rhine) and 1930 (Rhone) until today. Sediment grain size and parameters related to organic matter (OM) were also measured as potential factors that may affect the temporal distribution of OPEs and PAEs in sediments. Our results show that OPE and PAE levels increased continuously in Rhone and Rhine sediments since the first records. In both rivers, ∑PAEs levels (from 9.1 ± 1.7 to 487.3 ± 27.0 ng g-1 dry weight (dw) ± standard deviation and from 4.6 ± 1.3 to 65.2 ± 11.2 ng g-1 dw, for the Rhine and the Rhone rivers, respectively) were higher than ∑OPEs levels (from 0.1 ± 0.1 to 79.1 ± 13.7 ng g-1 dw and from 0.6 ± 0.1 to 17.8 ± 2.3 ng g-1 dw, for Rhine and Rhone rivers, respectively). In both rivers, di(2-ethylhexyl) phthalate (DEHP) was the most abundant PAE, followed by diisobutyl phthalate (DiBP), while tris (2-chloroisopropyl) phosphate (TCPP) was the most abundant OPE. No relationship was found between granulometry and additives concentrations, while organic matter helps explain the vertical distribution of PAEs and OPEs in the sediment cores. This study thus establishes a temporal trajectory of PAEs and OPEs contents over the last decades, leading to a better understanding of historical pollution in these two Western European rivers.

Optimizing a twin-chamber system for direct ozone production rate measurement.

High Ozone Production Rate (OPR) leads to O3 pollution episodes and adverse human health outcomes. OPR observation (Obs-OPR) and OPR modelling (Mod-OPR) have been obtained from observed and modelled peroxy radicals and nitrogen oxides. However, discrepancies between them remind of an imperfect understanding of O3 photochemistry. Direct measurement of OPR (Mea-OPR) by a twin-chamber system emerges. Herein, we optimized Mea-OPR design, i.e., minimizing the chamber surface area to volume ratio (S/V) to 9.8 m-1 from 18 m-1 and the dark uptake coefficient of O3 to 9.9 × 10-9 from 7.1 × 10-8 in the literature. In addition, control experiments further revealed and quantified a photo-enhanced O3 uptake, and therefore recommended an essential correction of Mea-OPR. We finally characterized a measurement uncertainty of ±38% and a detection limit of 3.2 ppbv h-1 (3SD), which suggested that Mea-OPR would be sensitive enough to measure OPR in urban or suburban environments. Further application of this system in urban Beijing during the Beijing 2022 Olympic Winter Games recorded a noontime OPR of 7.3 (±3.3, 1SD) ppbv h-1. These observational results added up to our confidence in future field application of Mea-OPR, to facilitate pollution control policy evaluation and to shed light on O3 photochemistry puzzle.

Advancing nuanced pollution control: Local improvements and spatial spillovers of policies on key enterprises.

This paper examines the impact of air pollution control policies targeting key polluting enterprises, highlighting a strategic shift towards precision pollution control that concentrates on high-emission, high-risk businesses. The paper explores the efficacy of these policies and their potential spatial spillover effects, utilizing panel data from 259 Chinese cities from 2013 to 2021. Employing the difference-in-differences (DID) model and spatial Durbin model, the study analyzes both the direct local effects and the broader spatial consequences of these regulatory measures on air quality. The findings indicate a significant reduction in air pollutant concentrations in urban areas, attributing this improvement to factors such as industrial restructuring, increased investment in science and technology, and economic growth. Spatial econometric analysis further reveals a substantial positive correlation in air quality among Chinese cities. However, estimates of the spillover effect indicate that while such policies successfully reduce pollution locally, they could unintentionally degrade air quality in adjacent areas. The study highlights the need for nuanced policy strategies to mitigate unintended spatial spillovers and enhance overall effectiveness. It recommends tailored policies that integrate environmental and socioeconomic objectives, national and regional coordination for consistent enforcement, technology-driven compliance strategies, and incentives for sustainable enterprise practices.

Characterization of road-deposited sediment wash-off and accurate splitting of initial runoff pollution in heterogeneous urban spaces.

Particulate materials arising from road-deposited sediments (RDS) are an essential target for the control and management of surface runoff pollution. However, the heterogeneity of urban spaces hinders the identification and quantification of particulate pollution, which is challenging when formulating precise control measures. To elucidate the factors that drive particulate pollution in heterogeneous urban spaces, the accumulation of RDS on dry days and the total suspended solids during six natural rainfall events were investigated across three urban-rural spatial units (central urban, central suburban, and remote suburban). The underlying surface type (asphalt or cement roads) and particle size composition jointly determined the spatial heterogeneity in the static accumulation and dynamic output loads of RDS during rainfall. These two factors explained 59.6% and 18.9% of the spatial heterogeneity, respectively, according to principal component analysis. A novel CPSI exponential wash-off equation that incorporates particle size composition and underlying surface type was applied. It precisely described the spatial heterogeneity of RDS wash-off loads, the estimated values exhibiting event mean concentration errors of 10.8-18.2%. When coupled with the M(V) curve, this CPSI exponential wash-off equation more precisely split the initial volume of runoff: a lower total volume (17.6-38.0%) was shown to carry a higher proportion of the load (70.0-93.7%) compared to the traditional coupled exponential wash-off equation (volume: 31.6-49.0%, load: 37-90%). This study provides a new approach to characterizing RDS wash-off processes and splitting initial runoff in heterogeneous spaces.

[Pollution Characteristics and Risk Assessment of Polycyclic Aromatic Hydrocarbons in Soils of Guangzhou].

In order to comprehensively study the pollution characteristics of polycyclic aromatic hydrocarbons （PAHs） in soils of Guangzhou， 222 topsoil samples were collected and analyzed. The ecological risk of soil PAHs pollution was evaluated using the effect interval low/median method （ERL/ERM） and the （BaP） toxicity equivalent method， and the health risk of soil PAHs pollution was evaluated using the lifelong cancer risk increment model. The source of PAHs was analyzed using the characteristic compound ratio method and PMF model. The results indicated that： the content of surface soil （∑16PAHs） in Guangzhou was 38-11 115 µg·kg-1， with an average of 526 µg·kg-1， and 16 types of polycyclic aromatic hydrocarbon monomers showed strong variation. There was a certain degree of ecological risk of PAHs in Guangzhou， and there was already a significant ecological risk of PAHs pollution in individual sampling points， which were generally in a state of mild pollution. Based on the results of the health risk assessment， the contribution rates of total cancer risk in both adults and children were presented as follows： skin contact > ingestion of soil > respiratory intake. The health risk of children was greater than that of adults， and the overall health risk was within an acceptable range. Source analysis showed that the main sources of soil PAHs in Guangzhou were coal （37.1%）； diesel （32%）； coking （17.3%）； and mixed sources of traffic emissions， biomass combustion， and petrochemical product volatilization （13.6%）. The overall source of soil PAHs belonged to mixed sources. The research results have enriched our understanding of the pollution status of PAHs in the surface soil of Guangzhou and are helpful in promoting soil pollution prevention and control actions.

[Health Risk Assessment for an Arsenic-contaminated Site Based on Monte Carlo Simulation and Parameters Optimization].

Risk assessment is a critical part of risk management for contaminated sites. However， in the specific management practice of As-contaminated sites， it is difficult to obtain realistic health risks for contaminated sites based on the total amount of pollutants and determined values of the model， thus preventing the control requirements of later remediation to be met. An increasing number of studies have recently been conducting risk assessments by considering bioavailability， modification parameters， and combined probabilistic models. To improve the accuracy of risk assessment results， taking a large As-contaminated site as a case， 432 sampling sites were set up and collected at different depths to analyze the level and distribution characteristics of As pollution， and probabilistic risk assessment was conducted with the modification of model parameters through literature research and Monte Carlo simulation. Then， the impact of traditional methods and probabilistic methods on health risk assessment was explored in comparison. The results indicated that ω（As） in the top soil of the study area ranged from 2.70-97.0 mg·kg-1， with a spatial variation coefficient of 0.61 and weaker spatial continuity. The carcinogenic risk and hazard index obtained by the traditional risk assessment method were 2.12E-4 and 8.36， respectively， which obviously overestimated the actual risk level and were not conductive to the refined management of As-contaminated sites. Combined with modification of model parameters and probabilistic risk assessment， the non-carcinogenic risk for adults and children was found to be at an acceptable level， and the carcinogenic risk was reduced by nearly an order of magnitude compared to that in the conventional method. Considering the relative biological effectiveness （RBA） of As， the 95% quantile of the total carcinogenic risk was 1.24E-5， a reduction of up to 36.41% compared to the uncorrected corresponding risk value of 1.95E-5. The carcinogenic risk of soil As for adults and children in the study area exceeded acceptable risk levels 1E-6， with oral ingestion of soil being the primary route of exposure. In addition， the results of the sensitivity analysis of the parameters showed that As concentration， daily oral ingestion rate of soils， and exposure duration of children had relatively larger effects for health risks. This work will provide a methodological and theoretical basis for achieving accurate risk assessment of As-contaminated sites and provide concepts for refined risk management.

Health risk and pollution associated with trace metals in the waters of the Ebolowa municipal lake basin (Central Africa): evidence from hydrochemistry, quality indices, and statistical analyses.

The aim of this study was to investigate the status of trace metals (As, Cr, Cu, Ni, Pb, Fe, and Zn) and health and carcinogenic risk associated then in the Ebolowa Municipal Lake (EML) basin. To this end, 21 water samples were collected from the EML and its two tributaries, Mfoumou and Bengo'o, and analyzed by Quantofix method (nanocolors and visiocolor ECO) by using the MACHEREY-NAGEL photometer. The data were processed using multivariate statistics. The results showed that all the physicochemical parameters (pH, EC, and TDS), with the exception of TDS, comply with were within WHO limits. The distribution of trace metals at the three sites investigated was as follows: Zn (80-400 ± 1.58 µg/L) > Cu (50-150 ± 9.38 µg/L) > Fe (10-40 ± 0.71 µg/L) > Pb (1-20 ± 3.02 µg/L) > As (1-9 ± 0.44 µg/L) > Ni (1-9 ± 1.48 µg/L). However, the highest values were observed in the EML and the Mfoumou River, where Pb pollution was noted. Statistical analysis showed that anthropogenic inputs increase the presence of Cr, Cu, Pb, and Zn. Trace Metal Pollution Index values were below 15 at all sites, illustrating low levels of pollution. The trace metal evaluation index values for the Bengo'o stream are pure (mean = 0.6), slightly affected in the Mfoumou stream (mean = 2.0), and moderately affected in the EML (mean = 2.2). The toxicity load index values illustrate that the waters studied are toxic. The non-carcinogenic (HI) and carcinogenic (CR) health risk index values suggest a risk linked to oral ingestion in the LME and Mfoumou watercourses. The latter appears to be the main source of allochthonous pollutant input to the EML.

Analysis and remediation of phthalates in aquatic matrices: current perspectives.

Phthalic acid esters (PAEs) are high production volume chemicals used extensively as plasticizers, to increase the flexibility of the main polymer. They are reported to leach into their surroundings from plastic products and are now a ubiquitous environmental contaminant. Phthalate levels have been determined in several environmental matrices, especially in water. These levels serve as an indicator of plasticizer abuse and plastic pollution, and also serve as a route of exposure to different species including humans. Reports published on effects of different PAEs on experimental models demonstrate their carcinogenic, teratogenic, reproductive, and endocrine disruptive effects. Therefore, regular monitoring and remediation of environmental water samples is essential to ascertain their hazard quotient and daily exposure levels. This review summarises the extraction and detection techniques available for phthalate analysis in water samples such as chromatography, biosensors, immunoassays, and spectroscopy. Current remediation strategies for phthalate removal such as adsorption, advanced oxidation, and microbial degradation have also been highlighted.