Progress and challenges of lyotropic liquid crystalline nanoparticles for innovative therapies.

Since the late 20th century, we have witnessed a growing and substantial advance in nanomedicine, in part due to the development of multifunctional and multimodal nanoplatforms that have enabled improved efficacy, biocompatibility, and novel therapeutic applications. Non-lamellar liquid-crystalline nanoparticles, especially, reverse hexagonal and cubic bicontinuous mesophases, have gained the attention of the scientific-academic community due to their intriguing and functional characteristics, such as self-organization into two- and three-dimensional supramolecular structures, high symmetry, and ability to accommodate hydrophobic and hydrophilic small molecules, peptides, proteins, nucleic acids, and imaging agents. Furthermore, these particles can be easily modified with specific and/or bioresponsive molecules allowing targeting and improved therapeutic performance. In this contribution we provide an overview of advances in the design and architecture of LCNPs, strategies to overcome biological barriers and main findings about interactions with different types of interfaces. We highlight recent applications in topical, oral, pulmonary and intravenous drug delivery in preclinical in vivo studies. We discussed the current scenario and translational obstacles faced for clinical translation, as well as our perspectives.

Determination of dexamethasone acetate in CETETH 20-based in liquid crystalline systems using HPLC.

Dexamethasone acetate (DEX), a potent anti-inflammatory, is used primarily in the treatment of inflammatory and autoimmune diseases. It was incorporated in CETETH 20 (polyoxyethylene 20 cetyl alcohol)-based liquid crystalline systems to enhance the purpose of the drug. Concomitant with the pharmaceutical technology performed, a HPLC method was developed and validated for the quantification of dexamethasone acetate in CETETH 20-based liquid crystalline systems for the evaluation of the drug in the new matrix. The method was performed using a C18 column with acetonitrile:methanol:water (35:35:30, v/v/v) as the mobile phase at a flow rate of 0.8 mL min-1 at 239 nm. The method was linear in the range of 1-25 µg mL-1 ; the limit of quantification and limit of detection were 0.05 and 0.16 µg mL-1 , respectively; the accuracy of the method was 99.92% (relative standard deviation < 1%), and it presented intra-day and inter-day precision with deviations less than 1%. In this context, the method was successfully used to determine the incorporation efficiency of DEX in CETETH 20-based liquid crystalline systems and can be easily used by pharmaceutical companies and laboratories around the world.

Advances in lyotropic liquid crystal systems for skin drug delivery.

INTRODUCTION: Lyotropic liquid crystals (LLCs) are organized mesophases with intermediate properties between liquids and solids. The LLC and its liquid crystalline nanoparticles (LCNPs) have attracted great interest from the scientific community in recent years as potential drug delivery systems due to the high internal ordering and symmetry with a wide interfacial area. AREAS COVERED: This article aims to gather information and to provide a description of the highly organized structures of LLCs. Updates on production methods and new insights for LCNPs optimization and physico-chemical and morphological caracterization techniques were discussed. We also discussed why these systems proved to be a platform for the design of nanocarrier drug delivery, with an emphasis on topical and transdermal applications. EXPERT OPINION: Drug delivery platforms are of particular importance to improve the biopharmaceutical aspects of therapies topically. Although several systems can be used, LLC or LCNPs appear to be favored due to their similarity to the lipid structure of the skin. The highly ordered structure and the possibility of chemical modifications make it possible to obtain better clinical responses. The results of several studies support the innovations in this field and predict that these systems can innovate the market of technologies for the treatment of cutaneous diseases and cosmetology.

Physicochemical characterization and thermal behavior of hexosomes containing ketoconazole as potential topical antifungal delivery system.

OBJECTIVE: The main purpose of this article is to show the valuable characteristics that liotropic liquid crystal systems possess to be employed as new drug delivery systems. SIGNIFICANCE: Colloidal aqueous dispersions of lyotropic liquid crystal mesophases such as the identified as cubosomes and hexosomes, and so on, have received considerable attention due to their unique nanostructures and their thermodynamic properties, which provide the potential as a sustained drug release matrix. Additionally, their large surface area and similarity with the liquid crystal structures of intercellular lipids of stratum corneum enhances the interaction with the skin and mucous, increasing the potential for topical drug delivery efficiency of biopharmaceutical class II drugs as the antifungal ketoconazole. METHODS: This article presents the results in morphological characteristics, particle size, ζ potential, flow, thermal behavior and drug release studies of hexosomes containing ketoconazole (LHLC-K) obtained with glycerol monooleate, propylene glycol monolaurate, poloxamer, and water mixtures. RESULTS: This colloidal system exhibits a Newtonian-type flow and a hexagonal nanostructure with a median particle size of 107 ± 20 nm and ζ potential of +4.45 ± 0.50 mV. Through differential scanning calorimetry studies, the LHLC-K demonstrated physical and chemical stability for more than six months and mesophasic thermal reversibility between 10 and 50 °C. Finally, LHLC-K releases ketoconazole following a kinetics described by the first order model. CONCLUSIONS: Physicochemical properties of the hexosomes containing ketoconazole are important for topical mycosis treatment administration, conditions of storage, and for its incorporation into the formulation of semi-solid dosage forms.

Prebiotic Evolution and Self-Assembly of Nucleic Acids.

Prebiotic evolution is the stage that is assumed to have taken place prior to the emergence of the first living entities, during which time the abiotic synthesis of monomers, oligomers, and supramolecular systems that led to the hypothesized RNA world occurred. In this Perspective, the success of one-pot Miller-Urey type synthesis of organic compounds is compared with the multipot syntheses developed within the framework of systems chemistry, which attempts to demonstrate that RNA could have been formed directly in the primitive environment. The prebiotic significance of liquid-crystal ordering of nucleic acid oligomers and self-organizing assemblages of RNA and DNA that are formed in the absence of membranes or mineral matrices is also addressed.

Thermal Magnetic Field Activated Propolis Release From Liquid Crystalline System Based on Magnetic Nanoparticles.

Intra-periodontal pocket drug delivery systems, such as liquid crystalline systems, are widely utilized improving the drug release control and the therapy. Propolis is used in the treatment of periodontal diseases, reducing the inflammatory and infectious conditions. Iron oxide magnetic nanoparticles (MNPs) can improve the treatment when an alternating external magnetic field (AEMF) is applied, increasing the local temperature. The aim of this study was to develop a liquid crystalline system containing MNPs for intra-periodontal pocket propolis release. MNPs were prepared using iron salts and the morphological, size, thermal, x-ray diffraction, magnetometry, and Mössbauer spectroscopy analyses were performed. Cytotoxicity studies using Artemia salina and fibroblasts were also accomplished. The systems were prepared using polyoxyethylene (10) oleyl ether, isopropyl myristate, purified water, and characterized by polarized optical microscopy, rheometry, and in vitro drug release profile using a periodontal pocket simulator apparatus. The antifungal activity of the systems was investigated against Candida spp. using an AEMF. MNPs displayed nanometric size, were monodisperse, and they displayed very low cytotoxicity. Microscopically homogeneous formulations were obtained displaying important physicochemical and biological properties. The system displayed prolonged release of propolis and important in vitro fungicide activity, which was increased when the AEMF was applied, indicating a potentially alternative therapy for the treatment of the periodontal disease.

Curcumin-Loaded Liquid Crystalline Systems for Controlled Drug Release and Improved Treatment of Vulvovaginal Candidiasis.

Vulvovaginal candidiasis (VVC) is the most common infection caused by Candida albicans and greatly reduces the quality of life of women affected by it. Due to the ineffectiveness of conventional treatments, there is growing interest in research involving compounds of natural origin. One such compound is curcumin (CUR), which has been proven to be effective against this microorganism. However, some of CUR's physicochemical properties, especially its low aqueous solubility, make the therapeutic application of this compound difficult. Thus, the incorporation of CUR in mucoadhesive liquid crystalline systems (MLCSs) for vaginal administration may be an efficient strategy for the treatment of VVC. MLCSs are capable of potentiating the compound's action, releasing it in a controlled manner, and can enable longer exposure at the site of infection. In this study, MLCSs consisting of oleic acid and ergosterol 5:1 (w/w) as the oily phase, PPG-5-CETETH-20 as the surfactant, and a polymer dispersion of 1% chitosan as the aqueous phase, were developed for the application of CUR (MLCS-CUR) in VVC treatment. The formulations were characterized by polarized light microscopy (PLM), small-angle X-ray scattering (SAXS), oscillatory rheometry, continuous shear rheometry, texture profile analysis, and in vitro mucoadhesion. In addition, the antimicrobial activity was evaluated in vitro, and the effects on local fungal burden and cytokine profiles were investigated in a murine model of VVC. PLM and SAXS showed that the developed formulations presented a characteristic of a microemulsion. However, after the addition of artificial vaginal mucus (AVM), PLM showed that the formulations had structures similar to the "Maltese cross" characteristic of lamellar MLCS. Mucoadhesive test results showed an increase in the mucoadhesive strength of these formulations. Rheology analyses suggested long-lasting action of the formulation at the infected site. The in vitro antimicrobial activity assays suggested that CUR possesses antifungal activity against Candida albicans, determined after its incorporation into the MLCS. Further, MLCS-CUR was also more effective in vivo in the control of vaginal infection than treatment with fluconazole. Immunological assays showed that the ratio of pro-inflammatory (IL-1ß) to anti-inflammatory (TGF-ß) cytokines has decreased and that there is a reduction in the number of polymorphonuclear neutrophils recruited to the vaginal lumen, showing that treatment with MLCS-CUR was effective in modulating the inflammatory reaction associated with the infection. The results suggest that MLCSs could potentially be used in the treatment of VVC with CUR.

Antimicrobial peptide-loaded liquid crystalline precursor bioadhesive system for the prevention of dental caries.

BACKGROUND: Anticaries agents must interfere with the adhesion of Streptococcus mutans and its proliferation in dental biofilm, without causing host toxicity and bacterial resistance. Natural substances, including cationic antimicrobial peptides (CAMPs) and their fragments, such as ß-defensin-3 peptide fragment (D1-23), have been widely studied. However, the chemical and physical stability of CAMPs may be compromised by external factors, such as temperature and pH, reducing the period of antimicrobial activity. METHODS: To overcome the aforementioned disadvantage, this study developed and character-ized a drug delivery system and evaluated the cytotoxicity and effect against S. mutans biofilm of a D1-23-loaded bioadhesive liquid crystalline system (LCS). LCS was composed of oleic acid, polyoxypropylene-(5)-polyoxyethylene-(20)-cetyl alcohol, Carbopol® 974P and Carbopol® 971P. LCS was analyzed by polarized light microscopy (PLM), rheology (viscoelasticity and flow properties) and in vitro bioadhesion. The viability of epithelial cells was evaluated. Minimal inhibitory concentration (MIC) and minimal bactericidal concentration (MBC) against S. mutans were determined for D1-23 for further evaluation of the effect against S. mutans biofilm after 4 and 24 h of exposure to treatments. RESULTS: PLM, rheology, and in vitro bioadhesion tests showed that both viscosity and bioadhesion of LCS increased after it was diluted with artificial saliva. D1-23-loaded LCS system presented better activity against S. mutans biofilm after 24 h when compared to 4 h of treatment, showing a cumulative effect. Neither LCS nor D1-23-loaded LCS presented toxicity on human epithelial cells. CONCLUSION: D1-23-loaded LCS is a promising drug delivery system for the prevention of dental caries.

In Vitro TyRP-1 Knockdown Based on siRNA Carried by Liquid Crystalline Nanodispersions: an Alternative Approach for Topical Treatment of Vitiligo.

PURPOSE: Vitiligo is a skin disease characterized by depigmentation and the presence of white patches that are associated with the loss of melanocytes. The most common explanation for the cause of this condition is that it is an autoimmune condition. TyRP-1 is involved in melanin pigment synthesis but can also function as a melanocyte differentiation antigen. This protein plays a role in the autoimmune destruction of melanocytes, which results in the depigmentation, characteristic of this disease. In this study, we evaluated liquid crystalline nanodispersions as non-viral vectors to deliver siRNA-TyRP-1 as an alternative for topical treatment of vitiligo. METHODS: Liquid crystalline nanodispersions were obtained and characterized with respect to their physical-chemical parameters including size, PdI and zeta potential, as well as Small Angle X-ray Scattering and complexing to siRNA. The effects of the liquid crystalline nanodispersions on the cellular viability, cell uptake and levels of the knockdown target TyRP-1 were evaluated in melan-A cells after 24 h of treatment. RESULTS: The liquid crystalline nanodispersions demonstrated adequate physical-chemical parameters including nanometer size and a PdI below 0.38. These systems promoted a high rate of cell uptake and an impressive TyRP-1 target knockdown (> 80%) associated with suitable loading of TyRp-1 siRNA. CONCLUSIONS: We demonstrated that the liquid crystalline nanodispersions showed promising alternative for the topical treatment of vitiligo due to their physical parameters and ability in knockdown the target protein involved with autoimmune destruction of melanocytes.

Development and characterization of p1025-loaded bioadhesive liquid-crystalline system for the prevention of Streptococcus mutans biofilms.

Formation of a dental biofilm by Streptococcus mutans can cause dental caries, and remains a costly health problem worldwide. Recently, there has been a growing interest in the use of peptidic drugs, such as peptide p1025, analogous to the fragments 1025-1044 of S. mutans cellular adhesin, responsible for the adhesion and formation of dental biofilm. However, peptides have physicochemical characteristics that may affect their biological action, limiting their clinical performance. Therefore, drug-delivery systems, such as a bioadhesive liquid-crystalline system (LCS), may be attractive strategies for peptide delivery. Potentiation of the action of LCS can be achieved with the use of bioadhesive polymers to prolong their residence on the teeth. In line with this, three formulations - polyoxypropylene-(5)-polyoxyethylene-(20)-cetyl alcohol, oleic acid, and Carbopol C974P in different combinations (F1C, F2C, and F3C) were developed to observe the influence of water in the LCS, with the aim of achieving in situ gelling in the oral environment. These formulations were assessed by polarized light microscopy, small-angle X-ray scattering, rheological analysis, and in vitro bioadhesion analysis. Then, p1025 and a control (chlorhexidine) were incorporated into the aqueous phase of the formulation (F + p1025 and F + chlorhexidine), to determine their antibiofilm effect and toxicity on epithelial cells. Polarized light microscopy and small-angle X-ray scattering showed that F1C and F2C were LCS, whereas F3C was a microemulsion. F1C and F2C showed pseudoplastic behavior and F3C Newtonian behavior. F1C showed the highest elastic and bioadhesive characteristics compared to other formulations. Antibiofilm effects were observed for F + p1025 when applied in the surface-bound salivary phase. The p1025-loaded nanostructured LCS presented limited cytotoxicity and effectively reduced S. mutans biofilm formation, and could be a promising p1025-delivery strategy to prevent the formation of S. mutans dental biofilm.

Polyethyleneimine and Chitosan Polymer-Based Mucoadhesive Liquid Crystalline Systems Intended for Buccal Drug Delivery.

The buccal mucosa is accessible, shows rapid repair, has an excellent blood supply, and shows the absence of the first-pass effect, which makes it a very attractive drug delivery route. However, this route has limitations, mainly due to the continuous secretion of saliva (0.5 to 2 L/day), which may lead to dilution, possible ingestion, and unintentional removal of the active drug. Nanotechnology-based drug delivery systems, such as liquid crystalline systems (LCSs), can increase drug permeation through the mucosa and thereby improve drug delivery. This study aimed at developing and characterizing the mechanical, rheological, and mucoadhesive properties of four liquid crystalline precursor systems (LCPSs) composed of four different aqueous phases (i) water (FW), (ii) chitosan (FC), (iii) polyethyleneimine (FP), or (iv) both polymers (FPC); oleic acid was used as the oil phase, and ethoxylated and propoxylated cetyl alcohol was used as the surfactant. Polarized light microscopy and small-angle X-ray scattering indicated that all LCPSs formed liquid crystalline states after incorporation of saliva. Rheological, texture, and mucoadhesive assays showed that FPC had the most suitable characteristics for buccal application. In vitro release study showed that FPC could act as a controlled drug delivery system. Finally, based on in vitro cytotoxicity data, FPC is a safe buccal drug delivery system for the treatment of several buccal diseases.

Liquid Crystalline Systems Based on Glyceryl Monooleate and Penetration Enhancers for Skin Delivery of Celecoxib: Characterization, In Vitro Drug Release, and In Vivo Studies.

Celecoxib (CXB) is a widely used anti-inflammatory drug that also acts as a chemopreventive agent against several types of cancer, including skin cancer. As the long-term oral administration of CXB has been associated with severe side effects, the skin delivery of this drug represents a promising alternative for the treatment of skin inflammatory conditions and chemoprevention of skin cancer. We prepared and characterized liquid crystalline systems based on glyceryl monooleate and water containing penetration enhancers which were primarily designed to promote skin delivery of CXB. Analysis of their phase behavior revealed the formation of cubic and hexagonal phases depending on the systems' composition. The systems' structure and composition markedly affected the in vitro CXB release profile. Oleic acid reduced CXB release rate, but association oleic acid/propylene glycol increased the drug release rate. The developed systems significantly reduced inflammation in an aerosil-induced rat paw edema model. The systems' composition and liquid crystalline structure influenced their anti-inflammatory potency. Cubic phase systems containing oleic acid/propylene glycol association reduced edema in a sustained manner, indicating that they modulate CXB release and permeation. Our findings demonstrate that the developed liquid crystalline systems are potential carriers for the skin delivery of CXB.

Trans-resveratrol-loaded nonionic lamellar liquid-crystalline systems: structural, rheological, mechanical, textural, and bioadhesive characterization and evaluation of in vivo anti-inflammatory activity.

Resveratrol (Res) is a common phytoalexin present in a few edible materials, such as grape skin, peanuts, and red wine. Evidence has shown the beneficial effects of Res on human health, which may be attributed to its anti-inflammatory activity. However, the poor aqueous solubility of Res limits its therapeutic effectiveness. Therefore, the use of nanostructured delivery systems for Res, such as liquid-crystalline systems, could be beneficial. In this study, we aimed to develop, characterize, and determine the in vivo effectiveness of Res-loaded liquid-crystalline systems. Systems containing copaiba balsam oil, polyethylene glycol-40 hydrogenated castor oil, and water were designed. Results of polarized light microscopy, small-angle X-ray scattering, texture-profile analysis, and flow-rheology analysis showed that the Res-loaded liquid-crystalline system had a lamellar structure, textural and mechanical (hardness, compressibility, and adhesiveness) properties, and behaved as a non-Newtonian fluid, showing pseudoplastic behavior upon skin application. Furthermore, all liquid-crystalline systems presented bioadhesive properties that may have assisted in maintaining the anti-inflammatory activity of Res, since the topical application of the Res-loaded lamellar mesophase liquid crystals resulted in edema inhibition in a carrageenan-induced paw-inflammation mouse model. Therefore, Res-loaded lamellar mesophases represent a promising new therapeutic approach for inhibition of skin inflammation.

Physicochemical characterization of drug nanocarriers.

Pharmaceutical design has enabled important advances in the prevention, treatment, and diagnosis of diseases. The use of nanotechnology to optimize the delivery of drugs and diagnostic molecules is increasingly receiving attention due to the enhanced efficiency provided by these systems. Understanding the structures of nanocarriers is crucial in elucidating their physical and chemical properties, which greatly influence their behavior in the body at both the molecular and systemic levels. This review was conducted to describe the principles and characteristics of techniques commonly used to elucidate the structures of nanocarriers, with consideration of their size, morphology, surface charge, porosity, crystalline arrangement, and phase. These techniques include X-ray diffraction, small-angle X-ray scattering, dynamic light scattering, zeta potential, polarized light microscopy, transmission electron microscopy, scanning electron microcopy, and porosimetry. Moreover, we describe some of the commonly used nanocarriers (liquid crystals, metal-organic frameworks, silica nanospheres, liposomes, solid lipid nanoparticles, and micelles) and the main aspects of their structures.

In Situ Gelling Liquid Crystalline System as Local siRNA Delivery System.

An effective short interfering RNA (siRNA) delivery system protects the siRNA from degradation, facilitates its cellular uptake, and promotes its release into the cytoplasm. Local administration of siRNA presents advantages over systemic administration, such as the possibility to use lower doses and allow local and sustained release. In this context, in situ solidifying organogels based on monoglycerides (MO), polyethylenimine (PEI), propylene glycol (PG) and tris buffer are an attractive strategy for intratumoral delivery of siRNA. In this study, precursor fluid formulation (PFF) composed of MO/PEI/PG/tris buffer at 7.85:0.65:76.5:15 (w/w/w/w) was used to deliver siRNA to tumor cells. The internal structure of the gel obtained from PFF was characterized using small angle X-ray scattering (SAXS). In addition, its ability to complex siRNA, protect it from degradation, and functionally deliver it to tumor cells was investigated. Moreover, in vivo gel formation following intratumoral injection was evaluated. The gel formed in excess water from PFF was found to comprise a mixture of hexagonal and cubic phases. The system was able to complex high amounts of siRNA, protect it from degradation, promote siRNA internalization, and induce gene silencing in vitro in a variety of tumor cell lines. Moreover, a gel formed in situ following intratumoral injection in a murine xenograft model. In conclusion, PFF is a potential delivery system for local and sustained delivery of siRNA to tumor tissue after intratumoral administration.

Integrated Computational Protocol for the Analysis of Quadrupolar Splittings from Natural-Abundance Deuterium NMR Spectra in (Chiral) Oriented Media.

Despite its low natural abundance, deuterium NMR spectroscopy in weakly oriented (chiral) solvents gives easy access to deuterium residual quadrupolar couplings (2 H-RQCs). These are formally equivalent to one-bond residual dipolar couplings ((13 C-1 H)-RDCs) for calculation of the Saupe tensor, and provide similar information for the study of molecular structure and orientational behavior. Because the quadrupolar interaction is one order of magnitude larger than the dipolar one, 2 H-RQC analysis is a much more sensitive tool for the detection of subtle structural differences and also tiny differences in molecular alignment, such as those observed for different enantiomers in chirally aligned media. To promote the analytical advantages of anisotropic, natural-abundance deuterium NMR (NAD NMR) spectroscopy in the organic chemistry community, we describe a 2 H-RQC/DFT-based integrated computational protocol for the evaluation of the order parameters of aligned solutes by using singular-value decomposition. Several examples of 2 H-RQC-assisted analysis of chiral and prochiral molecules dissolved in various polypeptide lyotropic chiral liquid crystals are reported. The role of the molecular shape in the ordering mechanism was investigated through the determination of intertensor angles between alignment tensors and inertia tensors by using the proposed protocol.

Spotlight on Biomimetic Systems Based on Lyotropic Liquid Crystal.

The behavior of lyotropic biomimetic systems in drug delivery was reviewed. These behaviors are influenced by drug properties, the initial water content, type of lyotropic liquid crystals (LLC), swell ability, drug loading rate, the presence of ions with higher or less kosmotropic or chaotropic force, and the electrostatic interaction between the drug and the lipid bilayers. The in vivo interaction between LCC-drugs, and the impact on the bioavailability of drugs, was reviewed. The LLC with a different architecture can be formed by the self-assembly of lipids in aqueous medium, and can be tuned by the structures and physical properties of the emulsion. These LLC lamellar phase, cubic phase, and hexagonal phase, possess fascinating viscoelastic properties, which make them useful as a dispersion technology, and a highly ordered, thermodynamically stable internal nanostructure, thereby offering the potential as a sustained drug release matrix for drug delivery. In addition, the biodegradable and biocompatible nature of lipids demonstrates a minimum toxicity and thus, they are used for various routes of administration. This review is not intended to provide a comprehensive overview, but focuses on the advantages over non modified conventional materials and LLC biomimetic properties.

Effect of Liquid Crystalline Systems Containing Antimicrobial Compounds on Infectious Skin Bacteria.

This study aimed (i) to prepare liquid crystalline systems (LCS) of glyceryl monooleate (GMO) and water containing antibacterial compounds and (ii) to evaluate their potential as drug delivery systems for topical treatment of bacterial infections. Therefore, LCS containing CPC (cetylpyridinium chloride) (LCS/CPC) and PHMB (poly(hexamethylene biguanide) hydrochloride) (LCS/PHMB) were prepared and the liquid crystalline phases were identified by polarizing light microscopy 24 h and 7 days after preparation. The in vitro drug release profile and in vitro antibacterial activity of the systems were assessed using the double layer agar diffusion method against Staphylococcus aureus, methicillin-resistant S. aureus, Staphylococcus epidermidis, Escherichia coli, and Enterococcus faecalis. The interaction between GMO and the drugs was evaluated by a drug absorption study. Stable liquid crystalline systems containing CPC and PHMB were obtained. LCS/PHMB decreased the PHMB release rate and exerted strong antibacterial activity against all the investigated bacteria. In contrast, CPC interacted with GMO so strongly that it became attached to the system; the amount released was not sufficient to exert antibacterial activity. Therefore, the studied liquid crystalline systems were suitable to deliver PHMB, but not CPC. Accordingly, it was demonstrated that GMO interacts with each drug differently, which may interfere in the final efficiency of GMO/water LCS.

Phase Transitions of Isotropic to Anisotropic Biocompatible Lipid-Based Drug Delivery Systems Overcoming Insoluble Benznidazole Loading.

Previous studies reported low benznidazole (BNZ) loading in conventional emulsions due to the weak interaction of the drug with the most common oils used to produce foods or pharmaceuticals. In this study, we focused on how the type of surfactant, surfactant-to-oil ratio w/w (SOR) and oil-to-water ratio w/w (OWR) change the phase behavior of different lipid-based drug delivery systems (LBDDS) produced by emulsion phase inversion. The surfactant mixture composed of soy phosphatidylcholine and sodium oleate (1:7, w/w, hydrophilic lipophilic balance = 16) stabilized medium chain triglyceride in water. Ten formulations with the clear aspect or less turbid dispersions (five with the SOR ranging from 0.5 to 2.5 and five with the OWR from 0.06 to 0.4) were selected from the phase behavior diagram to assess structural features and drug-loading capacity. The rise in the SOR induced the formation of distinct lipid-based drug delivery systems (nanoemulsions and liquid crystal lamellar type) that were identified using rheological measurements and cross-polarized light microscopy images. Clear dispersions of small and narrow droplet-sized liquid-like nanoemulsions, Newtonian flow-type, were produced at SOR from 0.5 to 1.5 and OWR from 0.12 to 0.4, while clear liquid or gel-like liquid crystals were produced at SOR from 1.5 to 2.5. The BNZ loading was improved according to the composition and type of LBDDS produced, suggesting possible drug location among surfactant layers. The cell viability assays proved the biocompatibility for all of the prepared nanoemulsions at SOR less than 1.5 and liquid crystals at SOR less than 2.5, demonstrating their promising features for the oral or parenteral colloidal delivery systems containing benznidazole for Chagas disease treatment.

Liquid Crystal Formation from Sunflower Oil: Long Term Stability Studies.

The Brazilian biodiversity offers a multiplicity of raw materials with great potential in cosmetics industry applications. Some vegetable oils and fatty esters increase skin hydration by occlusivity, keeping the skin hydrated and with a shiny appearance. Sunflower (Helianthus annus L.) oil is widely employed in cosmetic emulsions in the form of soaps, creams, moisturizers and skin cleansers due to the presence of polyphenols and its high vitamin E content. Liquid crystals are systems with many applications in both pharmaceutical and cosmetic formulations and are easily detected by microscopy under polarized light due to their birefringence properties. The aim of this research was to develop emulsions from natural sunflower oil for topical uses. Sunflower oil (75.0% w/w) was combined with liquid vaseline (25.0% w/w) employing a natural self-emulsifying base (SEB) derivative. The high temperature of the emulsification process did not influence the antioxidant properties of sunflower oil. Fatty esters were added to cosmetic formulations and extended stability tests were performed to characterize the emulsions. Fatty esters like cetyl palmitate and cetyl ester increase the formation of anisotropic structures. O/W emulsions showed acidic pH values and pseudoplastic behavior. The presence of a lamellar phase was observed after a period of 90 days under different storage conditions.