Deformity in valgus knee malalignment is not only in the femur but also in tibia or both, based on demographic and morphological analysis before and after knee osteotomies.

PURPOSE: This study aims to identify the demographic and morphological features of valgus knee deformity with unilateral osteoarthritic knee in the coronal plane. A secondary aim was to identify the distinct phenotypes of valgus knees in Hirschmann's phenotype and the coronal plane alignment of the knee (CPAK) classifications before and after a knee osteotomy (KO). METHODS: A total of 107 patients (57 female and 50 male) with a mean age of 42.4 ± 17.2 years, who underwent varisation osteotomy for symptomatic unilateral knee osteoarthritis (OA) and constitutional valgus deformity, were enrolled in the study, and the mean follow-up period was 29.1 ± 7.3 months. The included cases comprised 60 cases of distal femoral osteotomy, 10 cases of double-level osteotomy and 33 cases of high tibial osteotomy. All patients underwent preoperative and postoperative clinical, functional and radiological evaluations, analysed by analysis of variance tests. RESULTS: An analysis of the location of the valgus deformities demonstrated that 56 cases (52.3%) were femoral based, 18 cases (16.8%) were both femoral and tibial based and 33 cases (30.9%) were tibial based. Twelve preosteotomy cases (11.2%) and 38 postosteotomy cases (35.5%) matched the most common eight Hirschmann's phenotypes, phenotyping the coronal lower limb alignment based on the native alignment in young patients without OA. Four (3.7%) preosteotomy cases and 89 postosteotomy cases (83.1%) matched the most common three CPAK phenotypes (Ⅰ, Ⅱ, Ⅴ) based on constitutional alignment and joint line obliquity in healthy and osteoarthritic knees. CONCLUSION: In valgus knee malalignment, the location of the deformity is not only solely femoral-based but also solely tibial-based or combined femoral and tibial-based. An individualised osteotomy approach would be recommended to achieve careful preoperative planning that considers the location of the deformity and the resultant joint line. Hirschmann's and CPAK classification would not be relevant when KO is considered. LEVEL OF EVIDENCE: Level Ⅳ, retrospective case-control study.

Intramedullary nailing of femoral shaft fractures: an analysis of rotational malunions using 3D EOS.

PURPOSE: Rotational malalignment and leg length discrepancy after intramedullary nailing of femoral shaft are frequent. This study has three objectives: evaluate the rate of femoral rotational malalignment and leg length discrepancy using EOS imaging after antegrade intramedullary nailing of femoral shaft fracture, find a relevant clinical examination to detect malrotation and identified risk factors. METHODS: We performed a retrospective single-centre study between January 2014 and January 2022. Fifty-eight patients were clinically and radiographically assessed at a minimum of three months. RESULTS: The femoral rotation of the operated side was significantly greater by a mean of 15.4° in internal rotation compared to the healthy side. There was no statically significant difference for the femoral length (p = 0.08). CONCLUSION: When using EOS stereography following antegrade intramedullary nailing of post-traumatic diaphyseal femur fractures, a statistically significant difference of more than 15.4° in internal rotation was found for femoral rotation on the operated side compared to the healthy side.Please confirm if the author names are presented accurately and in the correct sequence (given name, middle name/initial, family name). Author 1 Given name: [B. Poirot] Last name [Seynaeve]. Also, kindly confirm the details in the metadata are correct.The last name of the first author was corrected : Given name = B. and last name = Poirot Seynaeve The details in matadata are correct LEVEL OF EVIDENCE: III.

Association patterns between lumbar paraspinal muscles and sagittal malalignment in preoperative patients undergoing lumbar three-column osteotomy.

PURPOSE: We aim to investigate the associations between lumbar paraspinal muscles and sagittal malalignment in patients undergoing lumbar three-column osteotomy. METHODS: Patients undergoing three-column osteotomy between 2016 and 2021 with preoperative lumbar magnetic resonance imaging (MRI) and whole spine radiographs in the standing position were included. Muscle measurements were obtained using a validated custom software for segmentation and muscle evaluation to calculate the functional cross-sectional area (fCSA) and percent fat infiltration (FI) of the m. psoas major (PM) as well as the m. erector spinae (ES) and m. multifidus (MM). Spinopelvic measurements included pelvic incidence (PI), sacral slope (SS), pelvic tilt (PT), L1-S1 lordosis (LL), T4-12 thoracic kyphosis (TK), spino-sacral angle (SSA), C7-S1 sagittal vertical axis (SVA), T1 pelvic angle (TPA) and PI-LL mismatch (PI - LL). Statistics were performed using multivariable linear regressions adjusted for age, sex, and body mass index (BMI). RESULTS: A total of 77 patients (n = 40 female, median age 64 years, median BMI 27.9 kg/m2) were analyzed. After adjusting for age, sex and BMI, regression analyses demonstrated that a greater fCSA of the ES was significantly associated with greater SS and SSA. Moreover, our results showed a significant correlation between a greater FI of the ES and a greater kyphosis of TK. CONCLUSION: This study included a large patient cohort with sagittal alignment undergoing three-column osteotomy and is the first to demonstrate significant associations between the lumbar paraspinal muscle parameters and global sagittal alignment. Our findings emphasize the importance of the lumbar paraspinal muscles in sagittal malalignment.

Coronal Alignment in Adult Spine Surgery.

Coronal realignment is an important goal in adult spine surgery that has been overshadowed by emphasis on the sagittal plane. As coronal malalignment drives considerable functional disability, a fundamental understanding of its clinical and radiographic evaluation and surgical techniques to prevent its development is of utmost importance. In this study, we review etiologies of coronal malalignment and their radiographic and clinical assessments, risk factors for and functional implications of postoperative coronal malalignment, and surgical strategies to optimize appropriate coronal realignment in adult spine surgery.

Knee varus alters three-dimensional ankle alignment in standing- a study with upright computed tomography.

BACKGROUND: For knee osteoarthritis (OA) treatment, it is important to correct the lower limb alignment including the foot. However, in the upright position, lower limb alignment is generally assessed from the body surface or radiographs, and it is a challenge to capture the exact characteristics of three-dimensional lower limb alignment. The purpose of the study was to measure lower limb alignment in patients with knee OA using upright computed tomography (CT) and radiography, and to identify features of knee joint deformity. METHODS: A total of 45 limbs in 25 patients with knee OA were enrolled. The subjects underwent both upright CT and radiography for the whole lower limb in the standing position. The joint angles were calculated on both images. The degree of knee OA was classified according to Kellgren-Lawrence (KL) grade by referring to radiography, which is mainly based on the degree of articular cartilage loss and severity of osteophytes, and the characteristics or correlation between knee and ankle joint in each group was investigated. RESULTS: In KL-I, there was an association between varus of the knee joint and internal rotation of the talocrural joint (r = 0.76, P < 0.05). In KL-II, there was an association between varus of the knee joint and eversion of the subtalar joint (r = 0.63, P < 0.05) and talocrural joint (r = - 0.65, P < 0.05). In KL-III, there was an association between varus of the knee joint and internal rotation of the subtalar joint (r = - 0.62, P < 0.05), and in KL-IV, there was an association between varus of the knee joint and internal rotation of the subtalar joint (r = - 0.58, P < 0.05). CONCLUSIONS: The lower limb alignment of patients with knee OA in the standing position was found that as knee OA worsened, it became apparent that compensatory knee joint alignment depended on the ankle joint rather than the subtalar joint. The results may help in the rehabilitation of patients with knee OA, since the ankle joint alignment has a significant impact on the knee joint during coarse movements involving load.

Repositional Subtalar Arthrodesis Combined With Supramalleolar Osteotomy for Late-Stage Varus Ankle Arthritis With Hindfoot Valgus.

BACKGROUND: Late-stage varus ankle arthritis is thought to be associated with varus of the tibial plafond and hindfoot. However, some late-stage varus arthritis show hindfoot valgus, which can be explained by subtalar subluxation with opposite directional motion between the talus and calcaneus. We hypothesized that late-stage varus ankle arthritis with hindfoot valgus could improve with repositional subtalar arthrodesis and supramalleolar osteotomy (SMO). The purpose of this study was to investigate the clinical and radiographic results of the repositional subtalar arthrodesis combined with SMO for late-stage varus ankle arthritis with hindfoot valgus. METHODS: This study includes 16 consecutive patients (16 ankles) with late-stage varus ankle arthritis of Takakura stage 3-b and hindfoot valgus who were treated using repositional subtalar arthrodesis combined with SMO and followed for a minimum of 2 years. Clinical results were assessed with the visual analog scale (VAS) and the Foot Function Index (FFI). Radiographic results were assessed with standard parameters measured on weightbearing foot and ankle radiographs. Clinical and radiographic results were evaluated preoperatively and at the last follow-up. RESULTS: VAS and FFI significantly improved after surgery. Mean talar tilt angle improved from 12.8 ± 2.8 degrees to 3.9 ± 3.1 degrees (P < .001). Talus center migration and Meary angle significantly improved after surgery. Medial distal tibial angle, lateral talocalcaneal angle, hindfoot moment arm, and talonavicular coverage angle significantly changed after surgery. Radiographic stage improved in 15 ankles (93.8%) after surgery. CONCLUSION: In this series with minimum 2-year follow-up, we found that late-stage (Takakura stage 3-b) varus ankle arthritis with hindfoot valgus clinically and radiographically improved with repositional subtalar arthrodesis combined with SMO. LEVEL OF EVIDENCE: Level IV, prognostic.

Spine-Pelvis-Hip Alignments in Degenerative Spinal Deformity Patients and Associated Procedure of One-Stage Long-Fusion with Multiple-Level PLIF or Apical-Vertebra Three Column Osteotomy-a Clinical and Radiographic Analysis Study.

OBJECTIVE: To explore the spine-pelvis-hip alignments in degenerative spinal deformity (DSD) patients, and compare the outcomes in the procedure of long-fusion with posterior lumbar inter-body fusion (PLIF) or single-level three-column osteotomy (STO) at lower lumbar level (LLL, L3 -S1 ) and thoracolumbar levels (TLL, T10 -L2 ) for those patients. METHODS: This is a retrospective study. Following institutional ethics approval, a total of 83 patients (Female, 67; Male, 16) with DSD underwent long-fusion with PLIF or STO surgery between March 2015 and December 2017 were reviewed. All of those patients were assigned into LLL and TLL groups. The average age at surgery was 65.2 years (SD, 8.1). Demographic (age, gender, BMI, and comorbidities), radiographs (both coronal and sagittal parameters) and health-related quality of life (HRQOL) assessments were documented. The radiographic parameters and HRQOL-related measurements at pre- and post-operation were compared with paired-samples t test, and those variables in the two groups were analyzed using an independent-sample t test. The relationships between pelvic incidence (PI) and other sagittal parameters were investigated with Pearson correlation analysis. The Pearson χ2 or Fisher's exact was carried out for comparison of gender, incidence of comorbidities and post-operative complications. RESULTS: There were 53 and 30 patients in the LLL and TLL groups respectively. Those spino-pelvic radiographic parameters had significant improvements after surgeries (P < 0.001). The patients in the two group with different pre-operative thoracolumbar kyphosis (TLK, P = 0.003), PI (P = 0.02), and mismatch of PI minus lumbar lordosis (PI-LL, P = 0.01) had comparable post-operative radiographic parameters except PI (P = 0.04) and pelvic-femur angle (PFA, P = 0.02). Comparing the changes of those spine-pelvic-hip data during surgeries, the corrections of TLK in TLL group were significant larger (P = 0.004). Pearson correlation analysis showed that there were negative relationship between PI and TLK (r = -0.302, P = 0.005), positive relationship between PI and LL (r = 0.261, P = 0.016) at pre-operation. Those patients underwent the surgical procedure that long-segment instrumentation and fusion with STO would have higher incidence of complications involving longer operative timing (P = 0.018), more blood loss (P < 0.001), revision surgery (P = 0.008), and cerebrospinal fluid leakage (P = 0.001). All the HRQOL scores significantly improved at final follow-up (P < 0.001), with no difference of intra-group. CONCLUSION: Patients suffered de-novo scoliosis or hyper-kyphosis with low PI would be vulnerable to significant thoracolumbar degeneration, and have more changes of spine-pelvis-hip data after long-fusion surgery, however, those with high PI would be closed to significant lumbar degeneration. Although spine-pelvis-hip alignments in DSD patients can be restored effectively after long-fusion with PLIF or STO, the incidence of complications in patients underwent STO was significant higher than that in patients performed multi-level PLIF.

Transiency of postoperative cervical kyphosis seen after surgical correction of sagittal malalignment in adult spinal deformity patients.

OBJECTIVE: In this study, we evaluated factors affecting changes in cervical lordosis after deformity correction and during follow-up period in adult spinal deformity (ASD) patients with severe sagittal imbalance. METHODS: Seventy-nine patients, with an average age of 71.6 years, who underwent long-segment fixation from T10 to S1 with sacropelvic fixation were included. We performed a comparative analysis of the radiographic parameters after surgery (Post) and at the last follow-up (Last). We calculated the Pearson's correlation coefficient and performed multilinear regression analysis to predict independent parameters for Post and Last cervical lordosis (CL), T1 slope (T1S), and thoracic kyphosis (TK). RESULTS: Hyperlordotic changes of -23.3° in CL before surgery was reduced to -7° after surgery, and Last CL had increased to -15.3°. T1S was reduced from 27° before surgery to 14.4° after surgery and had increased to 18.8° at the last follow-up. Through multilinear regression analysis, we found that Post CL and T1S were more significantly affected by the amount of LL correction (p = .045 and .049). The effect of Last T1S was significantly associated with the Last CL; the effect of Last TK, with the Last T1S; and the effect of Post PI-LL, with the Last TK (p < .05). CONCLUSION: The postoperative kyphotic change in CL in ASD patients with preoperative cervical hyperlordosis is not permanent and is affected by drastic LL correction and SVA restoration. To achieve spinopelvic harmony proportional to the difference in LL relative to PI, TK becomes modified over time to increase T1S and CL, in an effort to achieve optimal spine curvature.

[Radiographic analysis of limb malalignment in the frontal plane]. / Radiologische Analyse von Achsfehlstellungen des Knies in der Frontalebene.

Radiographic measurement of the lower limb alignment in the frontal plane is used to assess limb deformity, to plan corrective surgery and for follow-up. It is essential that age-related normal lower limb alignment and joint orientation angles are known before planning surgical treatment. EOS (EOS™ Imaging, Paris, France) can lead to supplemental information, especially in cases of severe multidimensional joint malalignment. It allows 3D reconstruction of a bone model of the limb to assess multi-dimensional deformity.

Flouroscopic Control of Tibial Torsion After Intramedullary Nailing: A Technical Trick.

SUMMARY: After intramedullary nailing of tibia shaft fractures, torsional malalignment greater than 10 degrees occur in up to 41% of operated legs. The reason is the difficult clinical assessment of rotation intraoperatively, the large variation in absolute torsion of the tibia, and the absence of established reliable methods to fluoroscopically evaluate tibial rotation and compare with the contralateral side. We present here a fast and low-tech intraoperative method on how to achieve identical tibial torsion of the operated and noninjured side. The method can be used for tibia shaft and metaphyseal fractures and only requires a normal C-arm fluoroscope with 2 monitors. First, a true lateral image of the knee on the noninjured side with the femoral condyles aligned is obtained. Second, with the leg and the C-arm rotation and tilt fixed, the fluoroscope is moved parallel to the patient axis and a lateral ankle image is obtained and saved. The fibula position relative to the tibia at the level of the Volkmann tubercle on the lateral view defines the torsion of the tibia. The sequence described above is repeated on the operated side after implantation of the nail before proximal locking. On the operated side, the fibula position relative to the tibia should be identical to the noninjured side before proximal locking takes place. Otherwise, a rotational malalignment is present and must be corrected. The comparison between operated and noninjured side is easy on a fluoroscope with 2 monitors. The complete examination takes a few minutes and has minor additional radiation exposure. We performed the intraoperative torsion control in 10 patients and performed a postoperative low-dose Computer Tomography-control of the torsion of both legs and found the rotational deformity to be less than 10 degrees in all patients.

Large Individual Bilateral Differences in Tibial Torsion Impact Accurate Contralateral Templating and the Evaluation of Rotational Malalignment.

OBJECTIVE: To determine individual bilateral differences (IBDs) in tibial torsion in a diverse population. METHODS: Computed tomography scans of uninjured bilateral tibiae were used to determine tibial torsion and IBDs in torsion using 4 measurement methods. Age, sex, and self-identified race/ethnicity were also recorded for each subject. Mean tibial torsion and IBDs in torsion were compared in the overall cohort and when stratified by sex and race/ethnicity. Simple and multiple linear regression models were used to correlate demographic variables with tibial torsion and IBDs in torsion. RESULTS: One hundred ninety-five patients were evaluated. The mean tibial torsion was 27.5 ± 8.3 degrees (range -3 to 47.5 degrees). The mean IBD in torsion was 5.3 ± 4.0 degrees (range 0-23.5 degrees, P < 0.001). 12.3% of patients had IBDs in torsion of ≥10 degrees. In the regression analysis, patients who identified as White had greater average torsion by 4.4 degrees compared with Hispanic/Latinx patients (P = 0.001), whereas age and sex were not significantly associated with absolute torsion. Demographics were not associated with significant differences in IBDs in torsion. CONCLUSIONS: Tibial torsion varies considerably and individual side-to-side differences are common. Race/ethnicity was associated with differences in the magnitude of tibial torsion, but no factors were associated with bilateral differences in torsion. The results of this study may be clinically significant in the context of using the uninjured contralateral limb to help establish rotational alignment during medullary nail stabilization of diaphyseal tibia fractures. In addition, these findings should be considered in the evaluation of tibia rotational malalignment. LEVEL OF EVIDENCE: Prognostic Level IV. See Instructions for Authors for a complete description of levels of evidence.

False malalignment after computer-navigated total knee arthroplasty.

BACKGROUND: Although computer navigation has improved component alignment in total knee arthroplasty (TKA), radiographic outliers are reported with a wide range in literature even using this technique. We hypothesized that the postoperative malalignment after computer-navigated TKA was partially derived from the inherent problems with two-dimensional (2D) measurement such as inaccuracies in measurement due to the knee position during the radiographic examination and the direction of the X-ray beam. We therefore conducted this study to determine how often knees with malalignment on 2D imaging were truly mal-aligned on three-dimensional (3D) reconstructed imaging. METHODS: Sixty-two computer-navigated primary TKAs performed in 47 patients were included in this study. In all cases, a weight-bearing long-leg radiograph was obtained after TKA. 3D measurements were performed for outliers 2° or more in coronal alignment of the femoral or tibial component. RESULTS: For the 18 femoral mal-aligned components on 2D imaging, eight (44.4%) were not truly mal-aligned on 3D imaging (P = 0.0014). For the eight tibial mal-aligned components on 2D imaging, all knees (100%) were not truly mal-aligned on 3D imaging (P < 0.0001). CONCLUSIONS: A considerable number of the false malalignments were included on 2D measurement. Postoperative component alignment in the computer-navigated TKA might be much better than previously reported.

Outcomes of complex primary total knee arthroplasties performed with custom cutting guides.

BACKGROUND: Total knee arthroplasty (TKA) is particularly challenging in patients with marked deformities or existing hardware due to the inability to use traditional instrumentation. One potential technique to mitigate this obstacle is the use of patient-specific cutting guides. The purpose of this study was to evaluate the use of custom cutting guides in complex primary TKAs. METHODS: Twenty complex TKAs performed in 18 patients were identified. Of these, 11 were performed in patients with existing hardware, three in patients with dwarfism, three in patients with post-traumatic deformities, two in a patient with multiple epiphyseal dysplasia, and one in a patient with a large deformity from Blount's disease. All prior hardware was retained. One patient died from unrelated causes three months following surgery. The remaining patients were followed for a mean of 5.2 years (range: 1.2-9.7 years). RESULTS: One patient sustained a non-displaced, medial tibial plateau fracture intra-operatively that was successfully treated with plating. Mean operative time was 112.1 ± 44.4 min, and mean hospital stay was 2.7 ± 1.6 days. Average deviation from the mechanical axis improved from 10.5° pre-operatively to 3.1° postoperatively (P < 0.001). Average Knee Society Scores improved from 48.1 to 77.4 points (P < 0.001). Mean extension improved from 5.9° to 1.4° (P = 0.049). Two patients subsequently required a manipulation under anesthesia, and one patient had delayed wound healing that resolved without surgery. CONCLUSIONS: Custom cutting guides are a viable option in complex primary TKAs where the use of traditional instrumentation would be challenging.

The impact of sagittal imbalance on walking in patients with lumbar spinal canal stenosis.

PURPOSE: Gait and posture disorder severely impedes the quality of life of affected patients with lumbar spinal canal stenosis (LSCS). Despite the major health concern, there is a paucity of literature about the relationships among spatiotemporal gait parameters and spinal sagittal parameters. This is a cross sectional study performed in a single tertiary referral center to determine the relationships among spatiotemporal gait parameters and spinal sagittal parameters in patients with LSCS. METHODS: A total of 164 consecutive patients with LSCS, 87 men and 77 women with mean age of 70.7 years, were enrolled. Spatiotemporal gait parameters were studied using a gait analysis system. Spinal sagittal parameters were studied including sagittal vertical axis (SVA), thoracic kyphosis (TK), lumbar lordosis (LL), sacral slope (SS), pelvic inclination (PI), and pelvic tilt (PT) both in the neutral and stepped positions. RESULTS: SVA was significantly larger in the stepped position than in the neutral position (neutral position, 72.5 mm; stepped position, 96.8 mm; p = 0.003). Parameters regarding the pelvis exhibited significant differences, which could represent pelvic anteversion in the stepped position. By stepwise multiple regression analysis, the prediction models, containing SVA (neutral) and PT (stepped) for double supporting phase, exhibited statistical significance, and accounted for approximately 50% of the variance. CONCLUSIONS: The present study provides statistically established evidence of correlation among spatiotemporal gait parameters and spinal sagittal parameters. Differences between sagittal parameters in neutral and stepped position may stand for the postural control during gait cycle, and increased SVA in neutral position and increased PT in stepped position may correlate with prolonged double supporting phase.

The fibula and talus position difference in functional and mechanical ankle instability: MRI findings.

PURPOSE: This study aimed to use MRI to evaluate the fibula and talus position difference in functional and mechanical ankle stability patients. METHODS: 61 and 68 patients with functional and mechanical instability, and 60 healthy volunteers were involved. Based on the axial MRI images, the rotation of the talus was identified through the Malleolar Talus Index (MTI). The position relative to the talus (Axial Malleolar Index, AMI) and medial malleolus (Intermalleolar Index, IMI) were used to evaluated the displacement of the fibula. RESULTS: Post hoc analysis showed that the values of malleolar talus index was significantly larger among mechanical instability (89.18° ± 2.31°) than that in functional instability patients (86.55° ±61.65°, P < 0.001) and healthy volunteers (85.59° ± 2.42°, P < 0.001). The axial malleolar index of the mechanical instability patients (11.39° ± 1.41°) were significantly larger than healthy volunteers (7.91° ± 0.83°) (P < 0.0001). There were no statistically significant differences in the above three indexes between the functional instability patients and healthy volunteers. CONCLUSION: The functional instability patients didn't have a posteriorly positioned fibula and an internally rotated talus. The malleolar talus index was significantly larger among mechanical instability patients than that in functional instability patients. Increased malleolar talus index may become a new indirect MRI sign for identifying functional and mechanical instability patients.

Difference in the early postoperative change of the joint line convergence angle between opening wedge and closed wedge high tibial osteotomies.

BACKGROUND: The purpose of this study was to investigate the correction error associated with soft tissue balance in high tibial osteotomy (HTO) and the difference between opening wedge HTO (OWHTO) and closed wedge HTO (CWHTO). METHODS: A total of 170 knees of 130 patients (85 knees of 68 patients in OWHTO and 85 knees of 62 patients in CWHTO) were evaluated. Anteroposterior radiographs of the knee and full-length leg were taken preoperatively, immediately under general anesthesia postoperatively, 2 days, and 1 and 12 months postoperatively. The femorotibial angle (FTA), joint line convergence angle (JLCA), and medial proximal tibial angle (MPTA) were measured. RESULTS: The postoperative FTA was decreased from 170.5 ± 2.1° at 0 day to 168.6 ± 2.2° at 2 days in OWHTO (P < 0.05), whereas it was not changed from 168.7 ± 2.4° at 0 day to 168.1 ± 2.8° at 2 days in CWHTO. The JLCA was 4.8 ± 1.8° preoperatively, 4.2 ± 1.9° at 0 day, 2.2 ± 1.8° at 2 days (P < 0.05 vs 0 day), 2.6 ± 1.7° at 1 month, and 2.7 ± 1.6° at 12 months in OWHTO, and 7.1 ± 3.2° preoperatively, 4.1 ± 2.4° at 0 day (P < 0.05 vs preoperative), 3.4 ± 2.5° at 2 days, 3.9 ± 2.3° at 1 month, and 4.2 ± 2.6° at 12 months in CWHTO. Multiple regression analysis showed that preoperative factors affecting change of the JLCA from preoperative to postoperative 1 month were the correction angle in OWHTO (P = 0.001) and the preoperative standing JLCA in OWHTO (P < 0.001) and CWHTO (P < 0.001). CONCLUSIONS: A significant decrease of the JLCA occurred immediately after osteotomy under anesthesia in CWHTO, whereas in OWHTO there was no decrease under anesthesia, but it decreased several days postoperatively.

Lower Limb Malrotation Is Regularly Present in Long-Leg Radiographs Resulting in Significant Measurement Errors.

Weight-bearing long-leg radiographs are commonly used in orthopaedic surgery. Measured parameters, however, change when radiographs are conducted in different rotational positions of the leg. It was hypothesized that rotational errors are regularly present in long-leg radiographs resulting in wrong measurements. In 100 consecutive long-leg radiographs conducted according to the method of Paley, rotation was assessed by fibular overlap. Angular parameters in radiographs (mechanical lateral proximal femoral angle (mLPFA), mechanical lateral distal femoral angle (mLDFA), angle between the anatomical and mechanical femoral axis (AMA), mechanical medial proximal tibia angle (mMPTA), mechanical lateral distal tibial angle (mLDTA), and the mechanical femoral and tibial axis (mFA-mTA) were measured and deviations related to malrotation calculated. An average internal rotation of 8 degrees was found in lower limbs showing a range between 29 degrees of internal and 22 degrees of external rotation. As a result, mean differences before and after rotational correction for measured parameters (mLPFA, mLDFA, AMA, mMPTA, mLDTA, mFA-mTA) ranged between 0.4 and 1.7 degrees (-2.1; 5.6 95% confidence interval [CI]). In conclusion, malrotation of lower limbs is regularly present in long-leg radiographs. As all measured parameters are influenced by malrotation, correct lower limb rotation needs to be verified.

Focal inlay resurfacing for full-thickness chondral defects of the femoral medial condyle may delay the progression to varus deformity.

INTRODUCTION: Full-thickness chondral defects at the knee joint predispose to the beginning of a degenerative process which final consequence is the compartment collapse and finally the deviation to varus, because the cartilage of the medial femoral condyle is the most frequently affected area. Likewise, people with these chondral defects are more likely to develop tricompartmental osteoarthritis, reason why early surgical management should be the treatment of choice. The aim of this study was to compare the pre- and post-operative lower limb alignment (mechanical axis), in cases of full-thickness chondral defects of the femoral medial condyle that have been managed by means of a prosthetic focal inlay resurfacing, at a minimum follow-up of five years. METHODS: A retrospective study of patients treated for chondral defects in the medial femoral condyle was performed. The inclusion criteria were patients who had undergone a focal inlay resurfacing and minimum follow-up of 5 years. Patients that required a concomitant valguizing tibial osteotomy were finally excluded. The follow-up analysis was performed by means of radiological examinations performed prior to surgery and at the last follow-up visit. The mean limb mechanical axis of the operated knees was calculated both pre- and post-operatively, and comparisons between these two settings were performed. RESULTS: Ten patients were included: eight men and two women. The mean age at the time of surgery was 55 (40-65) years. The mean follow-up was 9 years (range 5-15). The mean limb mechanical axis was 1.33 ± 4.16 in the pre-operative setting and 2.40 ± 5.50 in the post-operative setting (p = 0.441). CONCLUSION: In the setting of small to moderate size, unique femoral medial condyle full-thickness chondral lesions, filling the defect with an inlay prosthetic resurfacing may protect against the progression to varus deformity. LEVEL OF EVIDENCE: Therapeutic case series, Level IV.