Comparison of Amorphous Solid Dispersions of Spironolactone Prepared by Spray Drying and Electrospinning: The Influence of the Preparation Method on the Dissolution Properties.

This research aimed to compare two solvent-based methods for the preparation of amorphous solid dispersions (ASDs) made up of poorly soluble spironolactone and poly(vinylpyrrolidone-co-vinyl acetate). The same apparatus was used to produce, in continuous mode, drug-loaded electrospun (ES) and spray-dried (SD) materials from dichloromethane and ethanol-containing solutions. The main differences between the two preparation methods were the concentration of the solution and application of high voltage. During electrospinning, a solution with a higher concentration and high voltage was used to form a fibrous product. In contrast, a dilute solution and no electrostatic force were applied during spray drying. Both ASD products showed an amorphous structure according to differential scanning calorimetry and X-ray powder diffraction results. However, the dissolution of the SD sample was not complete, while the ES sample exhibited close to 100% dissolution. The polarized microscopy images and Raman microscopy mapping of the samples highlighted that the SD particles contained crystalline traces, which can initiate precipitation during dissolution. Investigation of the dissolution media with a borescope made the precipitated particles visible while Raman spectroscopy measurements confirmed the appearance of the crystalline active pharmaceutical ingredient. To explain the micro-morphological differences, the shape and size of the prepared samples, the evaporation rate of residual solvents, and the influence of the electrostatic field during the preparation of ASDs had to be considered. This study demonstrated that the investigated factors have a great influence on the dissolution of the ASDs. Consequently, it is worth focusing on the selection of the appropriate ASD preparation method to avoid the deterioration of dissolution properties due to the presence of crystalline traces.

Effect of the third component on the aging and crystallization of cinnarizine-soluplus® binary solid dispersion.

Multiple carriers may be used to prepare solid dispersions (SDs) for different purposes. The aim of this work is to investigate the effect of the third component on the physical stability and physical aging behavior of cinnarizine-soluplus SDs. HPMC, PVP, sorbitol and citric acid were used as the third component to prepare cinnarizine ternary SDs using hot melt extrusion method. The resultant samples were stored at 25 °C or under stress conditions. Differential scanning calorimetry, powder X-ray diffraction and dissolution tests were performed to investigate the changes of samples during the storage. Infrared spectroscopy was used to evaluate the interactions between drug and carriers. Results showed that the addition of HPMC or PVP enhanced the physical stability of ternary SDs stored at 25 °C rather than those stored under stress conditions. Sorbitol did not show any improvements in physical stability of samples stored at 25 °C or under stress conditions. Surprisingly, the physical stability of samples stored at 25 °C or under stress conditions was enhanced significantly by citric acid due to the ionic and hydrogen bonding interactions. The miscibility between drug and carriers as well as between different carriers should be considered when using multiple carriers. The third component can act as a "linker" by interacting with drug and polymer to enhance the physical stability of SDs effectively.

An example of how to establish the thermodynamic stability relationship between two polymorphs of a compound highly prone to solvate formation.

Upon transition from research to development, a new chemical entity, which acts upon the Kv1.5-potassium channel and blocks potassium flow in the atrium of the human heart, has been subjected to a crystallization screen. The sodium salt of an anthranilic acid amide with a heteroarylsulfonyl side chain forms solvates from all tested organic solvents. Solvent-free crystalline phases can only be obtained by drying certain solvates under suitable conditions. Two well crystalline solvent-free phases can be obtained this way. Three different methods were applied to determine their thermodynamic stability relationship from melting, solution and eutectic melting data. The different approaches are discussed and compared with respect to their accuracy and limitations.

Cocrystals of diacerein: Towards the development of improved biopharmaceutical parameters.

The effectiveness of Diacerein as an anti-osteoarthritis drug is limited due to its acutely poor aqueous solubility and bioavailability. The present study demonstrates cocrystallization as a successful technique to improve the biopharmaceutical parameters of diacerein. Three cocrystals of diacerein were prepared by an eco-friendly technique with three suitable coformers namely isonicotinamide, nicotinamide, and theophylline. The formation of a new solid phase was inferred from the DSC thermograms and powder diffraction pattern and was supported by FTIR. The crystal structures of the cocrystals determined from the PXRD pattern using Material Studio software. Detailed analysis showed the formation of supramolecular hetero-synthons of complementary functional groups of the coformers with the carbonyl and carboxyl groups of diacerein. The structural conformation of the cocrystalline state was also provided by the shifts in the ssNMR pattern of the cocrystals. The three new cocrystals were found to have a relatively high solubility and intrinsic dissolution rate which showed remarkable improvement in anti-arthritic activity as compared to diacerein. Thus, proving cocrystallization to be a potential solution to the solubility limited bioavailability problems of diacerein.

Enhancing the solubility of natural compound xanthotoxin by modulating stability via cocrystallization engineering.

A comprehensive cocrystal study for the insoluble natural pharmaceutical compound xanthotoxin (XT) was conducted, in which xanthotoxin-para aminobenzoic acid (XT-PABA) and xanthotoxin-oxalic acid (XT-OA) cocrystals were obtained. The xanthotoxin cocrystals were characterized by powder X-ray diffraction, thermal analysis, and FT-IR spectra, and the crystal structures were determined by single-crystal X-ray diffraction. Crystal structures and thermal analysis showed that XT-OA was more stable than XT-PABA. Energy framework calculation indicated that H-bond and π···π interactions generated in XT-OA were stronger than that in XT-PABA and xanthotoxin. The powder dissolution experiments of xanthotoxin and its cocrystals suggested the XT-OA cocrystal might be applied as an alternative formulation of API, on account of its enhanced solubility and stability in the hydrochloric acid buffer solution (pH 1.2). The cocrystallization engineering can prolong the enhanced apparent solubility via modulating the stability.

Role of Structure, Microenvironmental pH, and Speciation To Understand the Formation and Properties of Febuxostat Eutectics.

Cocrystallization studies were undertaken to improve the solubility of a highly water-insoluble drug, febuxostat (FXT), used in the treatment of gout and hyperuricemia. A liquid-assisted grinding (LAG) method was successfully employed, starting with the screening of various coformers for obtaining cocrystals. However, in this process, three eutectic systems with coformers (probenecid, adipic acid, and α-ketoglutaric acid) were formed. Affinities of the different functional groups to form a hydrogen bond and ΔpKa differences, leading to the eutectic formation, were discussed. The eutectic systems thus formed were further characterized and analyzed using a differential scanning calorimeter (DSC) and powder X-ray diffraction (PXRD). Binary thermal phase diagrams were plotted using different ratios of the systems to confirm the formation of eutectics, and pH-dependent solubility studies exhibited a significant decrease in the solubility in comparison to that of the drug for all three eutectic systems. The solubility of FXT reduced from 46.53 µg/mL (pH 5.63) to 46.03 µg/mL, 28.53 µg/mL, and 18.88 µg/mL; 770.58 µg/mL (pH 8.21) to 307.574 µg/mL, 116.63 µg/mL, 113.40 µg/mL; and from 13165.97 µg/mL (pH 10.13) to 1409.737 µg/mL, 854.51 µg/mL, and 1218.99 µg/mL for FXT-probenecid, FXT-adipic acid, and FXT-α-ketoglutaric acid eutectic systems, respectively. Furthermore, the microenvironmental pH studies were carried out to understand the effect of the microenvironment on the solubility of these eutectic systems. The contribution to solubility from lattice and nonlattice forces considering the microenvironment was also discussed.

The effect of co-amorphization of glibenclamide on its dissolution properties and permeability through an MDCKII-MDR1 cell layer.

Co-amorphous mixtures have been demonstrated to represent a promising approach for enhancing the dissolution of poorly water-soluble drugs. However, little is known of their permeability properties, especially through biological membranes, or about the relationship between their dissolution and permeability. In the present study, co-amorphous glibenclamide (GBC) mixtures with two amino acids, arginine (ARG) and serine (SER), in molar ratios of 1:1 were prepared by cryomilling. Their dissolution and permeability properties were studied in side-by-side diffusion chambers using cell layers containing Madine Darby kidney cells overexpressing P-glycoprotein (Pgp) transporters (MDCKII-MDR1), as Pgp may influence the absorption of GBC. Furthermore, two other compounds, the flavonoid quercetin (QRT) which is a Pgp inhibitor and the surfactant, sodium lauryl sulfate (SLS), were used as excipients to investigate if they improved either passive or active diffusion of GBC. In addition, amorphous QRT and a co-amorphous mixture of GBC and QRT (1:1) were characterized with respect to their solid-state properties and physical stability. It was demonstrated that co-amorphous GBC mixtures exhibited superior dissolution properties over the corresponding physical mixtures and amorphous GBC. Furthermore, the co-amorphous GBC-ARG-SLS mixture exhibited a 9-fold increase in permeating through the MDCKII-MDR1 cell layer as compared to the corresponding physical mixture. There was a correlation between the dissolution and permeability area under curve (AUC) values, evidence that the main mechanism behind the improved permeability of co-amorphous mixtures was their improved dissolution. The simultaneous dissolution/permeation testing with side-by-side diffusion chambers and MDCKII-MDR1 cells proved to be a feasible method for evaluating the dissolution/permeation interplay of amorphous compounds.

Univariate and Multivariate Models for Determination of Prasugrel Base in the Formulation of Prasugrel Hydrochloride Using XRPD Method.

Prasugrel hydrochloride (PHCl) undergoes salt disproportionation, and the resulting prasugrel free base (PFB) may lead to the poor in vitro and or in vivo performance of the drug product. The aim of the present work was to develop univariate and multivariate models based on X-ray powder diffraction to quantify the salt and base in the powder and tablet formulations. Compositionally identical formulations of PHCl and PFB were prepared and mixed in various proportions to make 0%-30% PFB sample matrices. The formulations consisted of commonly used excipients, which are generally used in commercially available products. X-ray powder diffraction data were collected and subjected to the least square regression and partial least square regression analysis. The model performance parameters such as root mean squared and standard errors were low for univariate models compared to partial least square regression multivariate models. Model predicted values of the independent sample matrices by both methods matched closely with the actual values of PFB and PHCl. However, residual and standard deviation were low in univariate models predicted values. The models developed in this work have been shown to quantitate the PHCl disproportionation to PFB fraction in the drug product and provide a means to control the disproportionation of PHCl.

High-pressure and -temperature spinning capillary cell for in situ synchrotron X-ray powder diffraction.

In situ research of materials under moderate pressures (hundreds of bar) is essential in many scientific fields. These range from gas sorption to chemical and biological processes. One industrially important discipline is the hydration of oil well cements. Existing capillary cells in this pressure range are static as they are easy to design and operate. This is convenient for the study of single-phase materials; however, powder diffraction quantitative analyses for multiphase systems cannot be performed accurately as a good powder average cannot be attained. Here, the design, construction and commissioning of a cost-effective spinning capillary cell for in situ powder X-ray diffraction is reported, for pressures currently up to 200 bar. The design addresses the importance of reducing the stress on the capillary by mechanically synchronizing the applied rotation power and alignment on both sides of the capillary while allowing the displacement of the supports needed to accommodate different capillaries sizes and to insert the sample within the tube. This cell can be utilized for multiple purposes allowing the introduction of gas or liquid from both ends of the capillary. The commissioning is reported for the hydration of a commercial oil well cement at 150 bar and 150°C. The quality of the resulting powder diffraction data has allowed in situ Rietveld quantitative phase analyses for a hydrating cement containing seven crystalline phases.

X-Ray Diffraction and Theoretical Calculation-Supported Formation of Polymorphic Cocrystals Discovered Through Thermal Methods: A Case Study.

Polymorphism commonly exists in the preparation of cocrystals and has attracted widespread attention from both the pharmaceutical industry and academia. However, few studies have examined how to discover polymorphic cocrystals and their potential formation mechanism. In this study, we report the novel discovery of salicylic acid: 3-nitrobenzamide (SA-3NBZ) polymorphic cocrystals by thermal methods. The formation mechanism is elucidated based on theoretical calculations. SA-3NBZ polymorphic cocrystals with molar ratio of 1:1 and 2:2 were discovered using the combination of differential scanning calorimetry and hot stage microscopy. Single-crystal X-ray diffraction analysis confirmed this discovery. Density functional theory calculations corrected with dispersion were conducted to illustrate the energetic stabilization of SA polymorphic cocrystals. Compared with the starting materials, formation of the cocrystals at 1:1 and 2:2 present a weak stabilization with overall energy reduction of -0.01 and -0.05 eV/molecule, respectively. The calculated noncovalent interactions index further suggests that intralayer hydrogen bonds and van der Waals forces contribute to these weak interactions. The density functional theory calculations are in good agreement with the X-ray diffraction data. Hence, thermal analysis is a simple and reliable method to discover polymorphic cocrystals.

Cocrystal and Salt Forms of an Imidazopyridazine Antimalarial Drug Lead.

Cocrystallization and salt formation were used to produce new multicomponent forms of a novel antimalarial imidazopyridazine drug lead (MMV652103) that displayed improved physicochemical properties. The drug lead had earlier shown good in vitro potency against multidrug resistant (K1) and sensitive (NF54) strains of the human malaria parasite Plasmodium falciparum, and high in vivo efficacy in both Plasmodium berghei and Plasmodium falciparum mouse models. A major drawback of MMV652103 is its limited aqueous solubility. Various new supramolecular products, including several multicomponent solid forms, are reported here, namely 3 cocrystal forms with the dicarboxylic acid coformers adipic acid, glutaric acid, and fumaric acid, and a salt form with malonic acid. These were characterized by thermal methods and their structures elucidated by single-crystal X-ray diffraction. A customized solubility experiment was performed in fasted-state simulated intestinal fluid for comparison of the solubility behavior of each new form of the drug lead with that of the untreated starting material. All of the multicomponent forms showed an improvement in the maximum concentrations (Cmax) attained by the drug lead and the rate at which it dissolved. The recorded Cmax values exceeded the concentration of the untreated compound by factors in the range 4.6-5.6.

Multicomponent Crystal of Mefenamic Acid and N-Methyl-d-Glucamine: Crystal Structures and Dissolution Study.

A novel multicomponent crystal (MC) of mefenamic acid (MA) and N-methyl-d-glucamine (MG) had been prepared to improve the physicochemical properties of poorly soluble drugs, and was characterized for its physicochemical properties by powder X-ray diffraction analysis, differential scanning calorimetry thermal analysis, FT-IR spectroscopy, in vitro dissolution rate, and physical stability. In addition, the crystal structure was determined by single-crystal X-ray diffraction analysis. The differential scanning calorimetry thermogram of the MA-MG binary system exhibits a single and sharp endothermic peak at 151.20°C, which was attributed to the melting point of a MC of MA-MG. FT-IR spectroscopy analysis showed the occurrence of solid-state interaction by involving proton transfer between MA and MG. The crystal structure analysis confirmed that MA-MG formed 1:1 ratio salt type MC. The formation of a MC of MA with MG significantly improved the dissolution rate of MA in compared to intact MA, and also the crystal demonstrated a good stability under a high relative humidity. These good properties would be attributed to the layer structure of MA and MG in the crystal.

Quantifying API polymorphs in formulations using X-ray powder diffraction and multivariate standard addition method combined with net analyte signal analysis.

The direct quantification of Active Pharmaceutical Ingredients in solid formulations is a challenging open issue. A consolidated analytical technique based on X-ray Powder Diffraction is available, being the definitive test for the identification of polymorphs and crystal phases. However, its application for quantitative analysis is hindered by matrix effects: refinement methods (e.g. Rietveld method) require a complete knowledge of samples' composition, while univariate calibration methods require the matrix effect to be studied and severely suffer from the co-presence of crystalline and amorphous phases in the sample. Multivariate analysis is the only way to bypass problems affecting refinements procedures and univariate calibration. In particular, the multivariate standard addition method (SAM) is promising; however, it is straightforward only when the analytical blank (matrix devoid of analyte) is available: in that case SAM is applied by simply extrapolating the SAM model to the matrix experimental signal. In this work, the quantitative analysis of polymorphic forms of Active Pharmaceutical Ingredients based on X-ray Powder Diffraction is performed for the first time by a method based on multivariate standard addition method combined with net analyte signal procedure; it allows for reliable quantification of polymorphs of active principles in solid formulations, which are rapidly analyzed without any sample pre-treatment. Two test cases are presented: quantification of two polymorphs of piracetam in binary mixtures (forms II and III), and quantification of paracetamol (form I) in Tachifludec®.

Lamotrigine: Design and synthesis of new multicomponent solid forms.

In this work, a crystal engineering and thermodynamic based approach has been used aiming at contributing to a deeper knowledge of lamotrigine multicomponent solid forms. Two types of co-molecules have been chosen that can give rise to co-crystals with lamotrigine through different supramolecular heterosynthons: the xanthines, theophylline and caffeine, and the three isomeric pyridinecarboxamides. Association with diflunisal, which may result in a salt, was also investigated. Mechanochemistry, differential scanning calorimetry, thermogravimetry, X-ray powder and single crystal diffraction, infrared spectroscopy were the methods used. For all the systems, exploratory neat mechanochemistry experiments, carried out on lamotrigine + co-molecule binary mixtures of different compositions, were not successful in promoting association. From differential scanning calorimetry data and the binary solid-liquid phase diagrams, co-crystals/salts were identified as well as their respective stoichiometry, and a methodology of synthesis was established. For pyridinecarboxamides, molecular recognition is dependent on the position of the amide group in the pyridine ring: co-crystallization did not occur with picolinamide co-former. Both xanthines form co-crystals with lamotrigine, (1:1) with theophylline and (2:1) lamotrigine:caffeine. Additionally, the crystalline structure of a lamotrigine:theophylline 1:1 monohydrate was solved. The (1:1) lamotrigine:theophylline co-crystal converts to this monohydrate in accelerated stability tests. A (1:1) lamotrigine:diflunisal salt was identified, which proved to be stable in accelerated stability assays.

Piroxicam cocrystals with phenolic coformers: preparation, characterization, and dissolution properties.

This study explores the preparation and investigation of dissolution properties of piroxicam cocrystals. Differential scanning calorimetry (DSC) was used to determine the capability of resorcinol (RES), methylparaben (MPB), and vanillin (VAN) to form cocrystals with piroxicam (PRX). Generation of cocrystals was attempted by liquid assisted grinding and slurry methods. Cocrystals were characterized by thermal methods, powder X-ray diffraction, and Fourier-transform infrared spectroscopy. Apparent solubility, intrinsic dissolution rate (IDR), and powder dissolution profile of cocrystals were compared with anhydrous piroxicam, piroxicam monohydrate (PRXMH), and previously reported piroxicam-succinic acid cocrystal. Contact angles and particle sizes of the studied solids were also measured. Based on the DSC screening results, we prepared and characterized PRX-RES and PRX-MPB cocrystals. Interestingly, the cocrystals not only failed to improve apparent solubility and IDR of PRX but also showed lower values than PRX that were attributed to induction of phase transformation of PRX to PRXMH. In contrary, cocrystals performed better than PRX in powder dissolution studies. The higher dissolution rates of cocrystals were explained by improved wettability and reduced sizes. This study has highlighted the complexity of solid state properties of cocrystals and has provided new evidence for the in-solution stability issues of cocrystals.

Applications of Powder X-Ray Diffraction in Small Molecule Pharmaceuticals: Achievements and Aspirations.

Since the discovery of X-ray diffraction and its potential to elucidate crystal symmetry, powder X-ray diffraction has found diverse applications in the field of pharmaceutical sciences. This review summarizes significant achievements of the technique during various stages of dosage form development. Improved understanding of the principle involved and development of automated hardware and reliable software have led to increased instrumental sensitivity and improved data analysis. These advances continue to expand the applications of powder X-ray diffraction to emerging research fields such as amorphous systems, mechanistic understanding of phase transformations, and "Quality by Design" in formulation development.

Quantitation of polymorphic impurity in entecavir polymorphic mixtures using powder X-ray diffractometry and Raman spectroscopy.

Entecavir was used for the treatment of chronic hepatitis B through inhibiting hepatitis B virus. The anhydrous form of entecavir (ENT-A) often appeared as impurity polymorph in the manufacturing process of entecavir monohydrate (ENT-H) such as granulation, drying and compression. Since different crystal forms might affect drug bioavailability and therapeutic effect, it was vital to control the ENT-A content of the drug product. The work aimed to develop useful methods to assess ENT-A weight percentage in ENT-H. Powder X-ray diffractometry (PXRD) and Raman spectrometric methods were applied. Binary mixtures with different ratios of pure ENT-H and pure ENT-A were scanned using PXRD and Raman to obtain spectra. Then peak heights and peak areas versus weight percentage were used to construct calibration curves. The best linear regression analysis data for PXRD and Raman method were found to be R2 = 0.9923 and R2 = 0.9953, in the weight ratio range of 2.1-20.2% w/w% of ENT-A in binary mixtures. Limit of detection (LOD) of ENT-A was 0.38% and limit of quantitation (LOQ) was 1.15% for PXRD method. LOD and LOQ for Raman method were 0.48% and 1.16%. The results showed that PXRD and Raman methods: both were precise and accurate, and could be used for measurement of ENT-A content in the selected weight percentage range. Partial least squares (PLS) algorithm with four data pre-processing methods: including multiplicative scatter correlation (MSC), standard normal variate (SNV), first and second derivatives were applied and evaluated using prediction errors. The best performance of PLS was R2 = 0.9958 with RMSEC (0.44%) and RMSEP (0.65%). Multivariate analysis for Raman spectra showed similar good results with univariate analysis, and would be an advantageous method when there were overlapped peaks in the spectra. In summary, the proposed PXRD and Raman method could be developed for the quality control of ENT-H. And Raman was a more promising method in industrial practice due to its slightly better precision, accuracy and time-saving advantage.

Pushing the Limits of Molecular Crystal Structure Determination From Powder Diffraction Data in High-Throughput Chemical Environments.

Crystal structure determination from powder diffraction data (SDPD) using the DASH software package is evaluated for data recorded using transmission capillary, transmission flat plate, and reflection flat plate geometries on a selection of pharmaceutical compounds. We show that transmission capillary geometry remains the best option when crystal structure determination is the primary consideration and, as expected, reflection flat plate geometry is not recommended for SDPD because of preferred orientation effects. However, the quality of crystal structures obtained from transmission plate instruments can be excellent, and the convenience factor for sample preparation, throughput, and retrieval is higher than that of transmission capillary instruments. Indeed, it is possible to solve crystal structures within an hour of a polycrystalline sample arriving in the laboratory, which has clear implications for making small-molecule crystal structures more routinely available to the practicing laboratory medicinal chemist. With appropriate modifications to crystal structure determination software, it can be imagined that SDPD could become a rapid turn-around walk-up analytical service in high-throughput chemical environments.

Probing the role of ceramide hydroxylation in skin barrier lipid models by 2H solid-state NMR spectroscopy and X-ray powder diffraction.

In this work, we studied model stratum corneum lipid mixtures composed of the hydroxylated skin ceramides N-lignoceroyl 6-hydroxysphingosine (Cer[NH]) and α-hydroxylignoceroyl phytosphingosine (Cer[AP]). Two model skin lipid mixtures of the composition Cer[NH] or Cer[AP], N-lignoceroyl sphingosine (Cer[NS]), lignoceric acid (C24:0) and cholesterol in a 0.5:0.5:1:1 molar ratio were compared. Model membranes were investigated by differential scanning calorimetry and 2H solid-state NMR spectroscopy at temperatures from 25 °C to 80 °C. Each component of the model mixture was specifically deuterated for selective detection by 2H NMR. Thus, the exact phase composition of the mixture at varying temperatures could be quantified. Moreover, using X-ray powder diffraction we investigated the lamellar phase formation. From the solid-state NMR and DSC studies, we found that both hydroxylated Cer[NH] and Cer[AP] exhibit a similar phase behavior. At physiological skin temperature of 32 °C, the lipids form a crystalline (orthorhombic) phase. With increasing temperature, most of the lipids become fluid and form a liquid-crystalline phase, which converts to the isotropic phase at higher temperatures (65-80 °C). Interestingly, lignoceric acid in the Cer[NH]-containing mixture has a tendency to form two types of fluid phases at 65 °C. This tendency was also observed in Cer[AP]-containing membranes at 80 °C. While Cer[AP]-containing lipid models formed a short periodicity phase featuring a repeat spacing of d = 5.4 nm, in the Cer[NH]-based model skin lipid membranes, the formation of unusual long periodicity phase with a repeat spacing of d = 10.7 nm was observed.

Synthesis, Characterization, and Crystal Chemistry of Tasimelteon, a Melatonin Agonist, in Its Anhydrous and Hemihydrate Forms.

Two crystalline forms of tasimelteon, a drug approved by the U.S. Food and Drug Administration for the treatment of non-24-h sleep-wake disorder, have been studied by single crystal and powder diffraction analyses, thermogravimetric analysis, differential scanning calorimetry, spectroscopic, and optical methods. The synthetic method forming tasimelteon is described in detail, with its full analytical, spectroscopic, and enantiopurity characterization. Solid tasimelteon hemihydrate, C15H19NO2·0.5H2O, is tetragonal with a = b = 7.3573(2) Å, c = 52.062(2) Å, V = 2818.1(2) Å3; Z = 8. Its crystal structure has been solved and refined in the P43212 space group, showing the occurrence of polymeric (H-bonded) slabs, thanks to the presence of water molecule (OW) tetrahedrally linked to 4 distinct tasimelteon molecules in a N2(OW)O2 fashion. The anhydrous form of tasimelteon, C15H19NO2, crystallizes in the monoclinic P21 space group, with a = 11.130(4), b = 4.907(2), c = 12.230(6) Å, ß = 91.03(3)°, V = 667.8(5) Å3; Z = 2. Thanks to the availability of good-quality specimens, the structure of the latter phase was solved by conventional single-crystal diffraction analysis, showing short intermolecular C=O…H-N interactions between (translationally related) tasimelteon molecules, forming, in the crystal, well-defined chains running along the b axis. The morphology of the 2 crystal forms has been analyzed by the means of optical microscopy and particle size distribution analysis. Worthy of note, the newly determined crystal structures enable the successful usage of full-pattern matching X-ray-based quantitative analyses of batches of industrial interest, in search for contamination or phase stability issues.