LC-MS/MS Assay for the Measurement of Cannabidiol Profiling in CBD Oil from Japanese Market and Application for Convertible Tetrahydrocannabinol in Acetic Acid Condition.

Cannabidiol (CBD), a major non-psychoactive cannabinoid, has a lot of attention due to its potential relaxing properties and led the trend in commercial CBD aroma/oral hemp seed oil from the Japanese market. In this study, a routine assay for evaluating CBD oil samples was performed using LC coupled with tandem mass spectrometry (LC-MS/MS) and was used to apply the convertible tetrahydrocannabinol (THC) in acetic acid conditions. Based on the electrospray positive ion mode, the detection of cannabidiolic acid (CBDA; m/z 359 > 219), cannabigerolic acid (CBGA; m/z 361 > 343), cannabigerol (CBG; m/z 317 > 193), CBD (m/z 315 > 193), THC (m/z 315 > 193) and cannabinol (CBN; m/z 311 > 223) was performed by satisfying separation with high density of C18 column. Oil samples (50 mg) were diluted with isopropanol (5 mL), to which stable isotope internal standards were added by dilution with methanol/water (50/50), and accuracy rates ranged from 97.8 to 102.2%. This method was used to evaluate the CBD oil products (5 kinds) from the Japanese market. Our survey found obvious counterfeit (non-detectable CBD) CBD oil from Japanese market. Following that, we investigated the conversion of THC in CBD oil samples in simple conditions such as 10% acetic acid and 70 °C for 6 h and discovered that converts THC proportions are approximately 5% ((THC content/CBD content) × 100) and <1.0%. Thus, our developed LC-MS/MS assay could be applied to monitor the CBD concentration and convertible THC from CBD oil.

Novel Δ8-Tetrahydrocannabinol Vaporizers Contain Unlabeled Adulterants, Unintended Byproducts of Chemical Synthesis, and Heavy Metals.

Cannabis e-cigarettes containing Δ8-tetrahydrocannabinol (Δ8-THC) produced synthetically from hemp-derived cannabidiol (CBD) have recently risen in popularity as a legal means of cannabis consumption, but questions surrounding purity and unlabeled additives have created doubts of their safety. Herein, NMR, GC-MS, and ICP-MS were used to analyze major components of 27 products from 10 brands, and it was determined none of these had accurate Δ8-THC labeling, 11 had unlabeled cutting agents, and all contained reaction side-products including olivetol, Δ4(8)-iso-tetrahydrocannabinol, 9-ethoxyhexahydrocannabinol, Δ9-tetrahydrocannabinol (Δ9-THC), heavy metals, and a novel previously undescribed cannabinoid, iso-tetrahydrocannabifuran.

The Diels-Alder Approach towards Cannabinoid Derivatives and Formal Synthesis of Tetrahydrocannabinol (THC).

Based on the Diels-Alder reaction of vinylchromenes with electron-poor dienophiles, we developed a strategy for the synthesis of tetrahydrocannabinol derivatives. Substituted vinyl chromenes could be converted with several dienophiles to successfully isolate several complex molecules. These molecules already contain the cannabinoid-like base structure and further processing of one such derivative led to a precursor of Δ9 -tetrahydrocannabinol. The most challenging step towards this precursor was an epoxidation step that was ultimately achieved via dimethyl dioxirane.

The synthetic CB1 cannabinoid receptor selective agonists: Putative medical uses and their legalization.

More than 500 molecules have been identified as components of Cannabis sativa (C. sativa), of which the most studied is Δ9-tetrahydrocannabinol (Δ9-THC). Several studies have suggested that Δ9-THC exerts diverse biological effects, ranging from fragmentation of DNA to behavioral disruptions. Currently, it is accepted that most of the pharmacological properties of Δ9-THC engage the activation of the cannabinoid receptors, named CB1 and CB2. Interestingly, multiple pieces of evidence have suggested that the cannabinoid receptors play an active role in the modulation of several diseases leading to the design of synthetic cannabinoid-like compounds. Advances in the development of synthetic CB1 cannabinoid receptor selective agonists as therapeutical approaches are, however, limited. This review focuses on available evidence searched in PubMed regarding the synthetic CB1 cannabinoid receptor selective agonists such as AM-1235, arachidonyl-2' chloroethylamide (ACEA), CP 50,556-1 (Levonantradol), CP-55,940, HU-210, JWH-007, JWH-018, JWH-200 (WIN 55,225), methanandamide, nabilone, O-1812, UR-144, WIN 55,212-2, nabiximols, and dronabinol. Indeed, it would be ambitious to describe all available evidence related to the synthetic CB1 cannabinoid receptor selective agonists. However, and despite the positive evidence on the positive results of using these compounds in experimental models of health disturbances and preclinical trials, we discuss evidence in regards some concerns due to side effects.

Enantioselective Total Synthesis of Potent 9ß-11-Hydroxyhexahydrocannabinol.

The first total synthesis of potent cannabinoid, 9ß-11-hydroxyhexahydrocannabinol, is achieved through a proline-catalyzed inverse-electron-demand Diels-Alder reaction. Using this asymmetric catalysis, the cyclohexane ring is constructed with two chiral centers as a single diastereomer with 97% ee. The creation of the third chiral center and benzopyran ring is demonstrated with the elegant synthetic strategies. This mild and efficient synthetic methodology provides a new route for the asymmetric synthesis of the other potent hexahydrocannabinols.

Single and combined effects of plant-derived and synthetic cannabinoids on cognition and cannabinoid-associated withdrawal signs in mice.

BACKGROUND AND PURPOSE: It has been suggested that the non-euphorogenic phytocannabinoid cannabidiol (CBD) can ameliorate adverse effects of Δ9 -tetrahydrocannabinol (THC). We determined whether CBD ameliorates cognitive deficits and withdrawal signs induced by cannabinoid CB1 /CB2 receptor agonists or produces these pharmacological effects on its own. EXPERIMENTAL APPROACH: The effects of THC or the CB1 /CB2 receptor full agonist WIN55212 alone, CBD alone or their combination were tested across a range of doses. Cognitive effects were assessed in C57BL/6 mice in a conditional discrimination task and in the Barnes maze. Cannabinoid withdrawal signs were assessed following precipitated withdrawal by acute administration of the CB1 receptor antagonist SR141716, the 5-HT1A receptor antagonist WAY100635, the TRPV1 receptor antagonist capsazepine or the adenosine A2A receptor antagonist SCH58261. KEY RESULTS: THC produced significant motor and cognitive impairment in the Barnes maze task, none of which were attenuated by the addition of CBD. CBD alone did not affect cognitive performance. Precipitation of withdrawal signs by SR141716 occurred in mice chronically treated with THC or WIN55,212. These withdrawal signs were not attenuated by addition of chronic CBD. Chronic treatment with CBD alone did not induce withdrawal signs precipitated by SR141716 or WAY100635. Chronic CBD treatment also produced anxiolysis, which was not altered by attempting to precipitate withdrawal-induced anxiety with a range of antagonists. CONCLUSIONS AND IMPLICATIONS: CBD as a monotherapy may prove to be a safer pharmacological agent, than CB1 receptor agonists alone or in combination with CBD, for the treatment of several disorders. LINKED ARTICLES: This article is part of a themed section on 8th European Workshop on Cannabinoid Research. To view the other articles in this section visit http://onlinelibrary.wiley.com/doi/10.1111/bph.v176.10/issuetoc.

Synthetic cannabinoids: the hidden side of Spice drugs.

Spice drugs are herbal mixtures sprayed with synthetic cannabinoids designed to mimic the psychoactive ingredient in marijuana [Δ-tetrahydrocannabinol (Δ-THC)] and synthesized by introducing modifications to the chemical structure of parental compounds aiming to circumvent legal regulations. Synthetic cannabinoid use/abuse can be devastating as toxicological effects and adverse reactions cannot be entirely predicted and may vary with the dose, route of administration, individual vulnerability and concomitant intake with other drugs. The absence of validated testing procedures in the clinical field makes difficult the adoption of a therapeutic approach effective in coping with the synthetic cannabinoid phenomenon, posing a significant challenge for prevention, treatment and public health in general. The aim of this review is to gain insights into the epidemiological, pharmacological and toxicological properties of synthetic cannabinoids, aiming to provide a reliable background needed for the management of synthetic cannabinoid-related adverse effects. Consumers, competent authorities and medical care professionals should be aware of the risks associated with synthetic cannabinoid use.

Crystal structures of agonist-bound human cannabinoid receptor CB1.

The cannabinoid receptor 1 (CB1) is the principal target of the psychoactive constituent of marijuana, the partial agonist Δ9-tetrahydrocannabinol (Δ9-THC). Here we report two agonist-bound crystal structures of human CB1 in complex with a tetrahydrocannabinol (AM11542) and a hexahydrocannabinol (AM841) at 2.80 Å and 2.95 Å resolution, respectively. The two CB1-agonist complexes reveal important conformational changes in the overall structure, relative to the antagonist-bound state, including a 53% reduction in the volume of the ligand-binding pocket and an increase in the surface area of the G-protein-binding region. In addition, a 'twin toggle switch' of Phe2003.36 and Trp3566.48 (superscripts denote Ballesteros-Weinstein numbering) is experimentally observed and appears to be essential for receptor activation. The structures reveal important insights into the activation mechanism of CB1 and provide a molecular basis for predicting the binding modes of Δ9-THC, and endogenous and synthetic cannabinoids. The plasticity of the binding pocket of CB1 seems to be a common feature among certain class A G-protein-coupled receptors. These findings should inspire the design of chemically diverse ligands with distinct pharmacological properties.

Neuropsychiatric and General Interactions of Natural and Synthetic Cannabinoids with Drugs of Abuse and Medicines.

BACKGROUND & OBJECTIVE: Cannabis is the most widely used illicit drug. The two most important natural cannabinoids are delta-9-tetrahydrocannabinol (THC) and cannabidiol (CBD). The THC content of cannabis has been increasing during the last years and recently appeared in the market as a series of synthetic cannabinoids with potent agonist activity. Recreational users frequently combine cannabis with other drugs of abuse as alcohol, amphetamines and derivatives, nicotine and cocaine. In addition, these subjects can be taking medicines for acute and chronic medical conditions. The increasing use of medicinal cannabis for chronic pain and neurological and psychiatric disorders can produce potential interactions with medications used for the symptomatic treatment of these or other diseases. CONCLUSION: THC and CBD are metabolized mainly in the liver by cytochrome P-450 isoenzymes (mainly CYP2Cs and CYP3A4). In vitro studies indicate that THC and CBD both inhibit CYP1A1, 1A2 and 1B1 enzymes, and recent studies have indicated that CBD is also a potent inhibitor of CYP2C19 and CYP3A4. Both cannabinoids may interact with other medications metabolized by the same pathway or by inducers/inhibitors of the isoenzymes. Cannabis produces sedation, impairs psychomotor performance, and increases blood pressure and heart rate. Pharmacodynamic interactions with other sedatives can potentiate the central effects but can be decreased by psychostimulants. This review focuses on the interactions between cannabinoids and alcohol, other drugs of abuse, and prescription medicines.

Thermolytic Degradation of Synthetic Cannabinoids: Chemical Exposures and Pharmacological Consequences.

Synthetic cannabinoids are manufactured clandestinely with little quality control and are distributed as herbal "spice" for smoking or as bulk compound for mixing with a solvent and inhalation via electronic vaporizers. Intoxication with synthetic cannabinoids has been associated with seizure, excited delirium, coma, kidney damage, and other disorders. The chemical alterations produced by heating these structurally novel compounds for consumption are largely unknown. Here, we show that heating synthetic cannabinoids containing tetramethylcyclopropyl-ring substituents produced thermal degradants with pharmacological activity that varied considerably from their parent compounds. Moreover, these degradants were formed under conditions simulating smoking. Some products of combustion retained high affinity at the cannabinoid 1 (CB1) and CB2 receptors, were more efficacious than (-)-cis-3-[2-hydroxy-4-(1,1-dimethylheptyl)phenyl]-trans-4-(3-hydroxypropyl)cyclohexanol (CP55,940) in stimulating CB1 receptor-mediated guanosine 5'-O-(3-thiotriphosphate) (GTPγS) binding, and were potent in producing Δ9-tetrahydrocannabinol-like effects in laboratory animals, whereas other compounds had low affinity and efficacy and were devoid of cannabimimetic activity. Degradants that retained affinity and efficacy also substituted in drug discrimination tests for the prototypical synthetic cannabinoid 1-pentyl-3-(1-naphthoyl)indole (JWH-018), and are likely to produce psychotropic effects in humans. Hence, it is important to take into consideration the actual chemical exposures that occur during use of synthetic cannabinoid formulations to better comprehend the relationships between dose and effect.

Pharmacokinetics of (synthetic) cannabinoids in pigs and their relevance for clinical and forensic toxicology.

Synthetic cannabinoids (SCs) are gaining increasing importance in clinical and forensic toxicology. They are consumed without any preclinical safety studies. Thus, controlled human pharmacokinetic (PK) studies are not allowed, although being relevant for interpretation of analytical results in cases of misuse or poisoning. As alternative, in a controlled animal experiment, six pigs per drug received a single intravenous dose of 200µg/kg BW each of Δ(9)-tetrahydrocannabinol (THC), 4-ethylnaphthalen-1-yl-(1-pentylindol-3-yl)methanone (JWH-210), or 2-(4-methoxyphenyl)-1-(1-pentyl-indol-3-yl)methanone (RCS-4). In addition, six pigs received a combination of the three drugs with the identical dose each. The drugs were determined in serum using LC-MS/MS. A population (pop) PK analysis revealed that a three-compartment model described best the PK data of all three cannabinoids. Central volumes of distribution were estimated at 0.29L/kg, 0.20L/kg, and 0.67L/kg for THC, JWH-210, and RCS-4, respectively. Clearances were 0.042L/min/kg, 0.048L/min/kg, and 0.093L/min/kg for THC, JWH-210, and RCS-4, respectively. The popPK THC pig model was upscaled to humans using allometric techniques. Comparison with published human data revealed that the concentration-time profiles could successfully be predicted. These findings indicate that pigs in conjunction with PK modeling technique may serve as a tool for prediction of human PK of SCs.

Activation of Marginally Reactive Boron Enolates by MeLi for the Formation of Enol Phosphates and Synthesis of the Δ(9)-THC Intermediate.

The addition of MeLi to boron enolates produced by the 1,4-addition of Ar2Cu(CN)Li2 to BF3·OEt2-activated enones was followed by the reaction with ClP(O)(OEt)2 to afford the corresponding enol phosphates in moderate to good yields. The scope of this method was examined with sterically hindered or electronically biased enones and/or reagents. This activation of boron enolates was successfully applied to the synthesis of the methyl ether of Δ(9)-tetrahydrocannabinol.

Short and Divergent Total Synthesis of (+)-Machaeriol†B, (+)-Machaeriol†D, (+)-Δ(8)-THC, and Analogues.

Short and highly efficient stereoselective syntheses provide machaeriols and cannabinoids in a divergent approach starting from a common precursor, commercially available (S)-perillic acid. Key features of the novel strategy are a stereospecific palladium-catalyzed decarboxylative arylation and a one-pot sequence comprising a stereoselective hydroboration followed by oxidation or reduction of the corresponding intermediary boranes. The divergent approach is convincingly demonstrated by the five-step syntheses of (+)-machaeriol B, (+)-machaeriol D, and related analogues, and the four-step synthesis of (+)-Δ(8)-THC and an analogue.

Honey oil burns: a growing problem.

There is an emerging mechanism of burn injury as a result of the ignition of butane, during the manufacture of a tetrahydrocannabinol concentrate known as butane honey oil. The authors report of a series of patients who presented with this mechanism of injury and a description of the process that causes these burns. Patient data were gathered from the medical records of eight patients treated at the University of California Davis Medical Center and Shriners Hospital of Northern California. Information on the manufacturing process of butane honey oil was gathered from Internet searches and published literature on the topic. The burns witnessed at the abovementioned institutions ranged from 16 to 95% TBSA, with an average of 49.9%. The average length of stay for the patients was 118.3 hospital days and 114.4 intensive care unit days, with an average of 43.8 days spent on mechanical ventilation. The average age of patients was 22 years, with only one patient above the age of 30 years. Accidents during honey oil production have resulted in a surge of burn injuries in our community during the past year. The manufacture of this product, which involves the use of volatile butane gas, is gaining in popularity. Although considered to be safer than previous methods, multiple casualties with extensive burn injuries have resulted from this process. Associated injuries from blast trauma or chemical burns are not likely to occur in these types of explosions and have not been observed in the series reported in this article. In light of the increasing popularity of honey oil, it is important for burn care providers to gain awareness and understanding of this problem and its growing presence in the community.

Stereodivergent total synthesis of Δ9-tetrahydrocannabinols.

All four stereoisomers of Δ(9)-tetrahydrocannabinol (Δ(9)-THC) were synthesized in concise fashion using stereodivergent dual catalysis. Thus, following identical synthetic sequences and applying identical reaction conditions to the same set of starting materials, selective access to the four stereoisomers of THC was achieved in five steps.

Synthesis of [13C4]-labeled ∆9-tetrahydrocannabinol and 11-nor-9-carboxy-∆9-tetrahydrocannabinol as internal standards for reducing ion suppressing/alteration effects in LC/MS-MS quantification.

(-)-∆9-Tetrahydrocannabinol is the principal psychoactive component of the cannabis plant and also the active ingredient in some prescribed drugs. To detect and control misuse and monitor administration in clinical settings, reference samples of the native drugs and their metabolites are needed. The accuracy of liquid chromatography/mass spectrometric quantification of drugs in biological samples depends among others on ion suppressing/alteration effects. Especially, 13C-labeled drug analogues are useful for minimzing such interferences. Thus, to provide internal standards for more accurate quantification and for identification purpose, synthesis of [13C4]-∆9-tetrahydro-cannabinol and [13C4]-11-nor-9-carboxy-∆9-tetrahydrocannabinol was developed via [13C4]-olivetol. Starting from [13C4]-olivetol the synthesis of [13C4]-11-nor-9-carboxy-∆9-tetrahydrocannabinol was shortened from three to two steps by employing nitromethane as a co-solvent in condensation with (+)-apoverbenone.

One-pot heterogeneous synthesis of Δ(3)-tetrahydrocannabinol analogues and xanthenes showing differential binding to CB(1) and CB(2) receptors.

Δ(9)-tetrahydrocannabinol (Δ(9)-THC) is the major psychoactive cannabinoid in hemp (Cannabis sativa L.) and responsible for many of the pharmacological effects mediated via cannabinoid receptors. Despite being the major cannabinoid scaffold in nature, Δ(9)-THC double bond isomers remain poorly studied. The chemical scaffold of tetrahydrocannabinol can be assembled from the condensation of distinctly substituted phenols and monoterpenes. Here we explored a microwave-assisted one pot heterogeneous synthesis of Δ(3)-THC from orcinol (1a) and pulegone (2). Four Δ(3)-THC analogues and corresponding Δ(4a)-tetrahydroxanthenes (Δ(4a)-THXs) were synthesized regioselectively and showed differential binding affinities for CB1 and CB2 cannabinoid receptors. Here we report for the first time the CB1 receptor binding of Δ(3)-THC, revealing a more potent receptor binding affinity for the (S)-(-) isomer (hCB1Ki = 5 nM) compared to the (R)-(+) isomer (hCB1Ki = 29 nM). Like Δ(9)-THC, also Δ(3)-THC analogues are partial agonists at CB receptors as indicated by [(35)S]GTPγS binding assays. Interestingly, the THC structural isomers Δ(4a)-THXs showed selective binding and partial agonism at CB2 receptors, revealing a simple non-natural natural product-derived scaffold for novel CB2 ligands.

Quantification of selected synthetic cannabinoids and Δ9-tetrahydrocannabinol in oral fluid by liquid chromatography-tandem mass spectrometry.

An LC-MS/MS method for the quantification of the synthetic cannabinoids JWH-200, JWH-250, JWH-073, JWH-018, HU-211, CP 47,497 and CP 47,497-C8, and THC in oral fluid was developed and validated. Samples (0.5 mL) were extracted using Strata X cartridges (Phenomenex). Chromatographic separation was achieved with a Sunfire™ IS column (20×2.1 mm, 3.5 µm) (Waters Corp.), with formic acid 0.1% and acetonitrile as mobile phase. A different chromatographic gradient was applied for the separation of the analytes depending on the ionization mode employed, with a total chromatographic run of 14 min. Detection was performed in a Quattro Micro™ API ESCI (Waters Corp.), using electrospray in the positive mode (ESI+) for JWH-200, JWH-250, JWH-073, JWH-018 and THC, and ESI- for HU-211, CP 47,497, and CP 47,497-C8. Validation of the method included the assessment of selectivity, linearity (0.1-2.5 to 200 ng/mL), limits of detection (0.025-1 ng/mL) and quantification (0.1-2.5 ng/mL), imprecision (%CV≤14.4%), accuracy (91.8-109.7% of target concentration), extraction recovery (65.4-105.6%) and Quantisal recovery (56.1-66.7%), and matrix effect (neat oral fluid: -56.0% to 38.5%; oral fluid in Quantisal buffer: -15.1% to -71.7%). The application of this method to oral fluid samples from roadside testing will provide unique information on the use of these new synthetic drugs by Spanish drivers.

Enantioselective total synthesis of (-)-Δ8-THC and (-)-Δ9-THC via catalytic asymmetric hydrogenation and S(N)Ar cyclization.

The highly efficient asymmetric total syntheses of (-)-Δ(8)-tetrahydrocannabinol ((-)-Δ(8)-THC) (13 steps, 35%) and (-)-Δ(9)-tetrahydrocannabinol ((-)-Δ(9)-THC) (14 steps, 30%) have been developed by using ruthenium-catalyzed asymmetric hydrogenation of racemic α-aryl cyclic ketones via dynamic kinetic resolution and intramolecular S(N)Ar cyclization.

High-pressure access to the Δ9-cis- and Δ9-trans-tetrahydrocannabinols family.

Diels-Alder reactions of a range of 1-(alkoxy/alkyl-substituted phenyl)buta-1,3-dienes with methyl vinyl ketone and methyl acrylate carried out in ethanol as the reaction medium under 9 kbar pressure were investigated. The use of high pressure as the activating method of the Diels-Alder reactions allows the efficient and endodiastereoselective generation of a series of cis-cyclohexenyl-benzene cycloadducts, which are selectively converted into their trans-epimers. The cis-cyclohexenyl-benzenes and trans-cyclohexenyl-benzenes produced are useful precursors for accessing substituted privileged cis-6a,7,8,10a-tetrahydro-6H-benzo[c]chromene and trans-6a,7,8,10a-tetrahydro-6H-benzo[c]chromene skeletons. The total syntheses of Δ(9)-cis-tetrahydrocannabinol (THC) and Δ(9)-trans-THC, through the use of selected Diels-Alder adducts, are described. Finally, a route for obtaining Δ(9)-trans-THC in both enantiomeric pure forms based on the (S)-(-)-1-amino-2-(methoxymethyl)pyrrolidine (SAMP)-hydrazone method is also reported.