Anodic stripping voltammetry of arsenic determination with edible mushroom-nafion-modified glassy carbon electrode.

An edible Mushroom-Nafion modified glassy carbon electrode (M2N5-GCE) was prepared using a homogeneous mixture varying the concentrations of these, in addition to the origin of the mushroom (Shiitake, Lentinula edodes, M1 and Abrantes, Agariscus bisporus, M2) and applied to the As(III) determination by anodic stripping voltammetry. After choosing the optimal conditions in the preparation of the electrode, the second stage was to study the effects of various parameters such as supporting electrolyte, pH, accumulation potential, and time (Eacc, tacc). The optimum experimental conditions chosen were Britton Robinson buffer 0.01 mol L-1 pH:4.6; Eacc: -1.0 and tacc: 60 s obtaining a signal of oxidation of As(0) to As(III) about 0.08 V. Peak current was proportional to arsenic concentration over the 19.6-117.6 µg L-1 range, with a 3σ detection limit of 13.4 µg L-1. The method was validated using As(III) spiked tap water from the laboratory with satisfactory results (RE:3.0 %). Finally, the method was applied to the determination of As(III) in water samples from the Loa River (Northern Chile) in the presence of As(V) in a concentration >20 times higher (RE: 2.3 %).

A review on recent environmental electrochemistry approaches for the consolidation of a circular economy model.

Availability of raw materials in the chemical industry is related to the selection of the chemical processes in which they are used as well as to the efficiency, cost, and eventual evolution to more competitive dynamics of transformation technologies. In general terms however, any chemically transforming technology starts with the extraction, purification, design, manufacture, use, and disposal of materials. It is important to create a new paradigm towards green chemistry, sustainability, and circular economy in the chemical sciences that help to better employ, reuse, and recycle the materials used in every aspect of modern life. Electrochemistry is a growing field of knowledge that can help with these issues to reduce solid waste and the impact of chemical processes on the environment. Several electrochemical studies in the last decades have benefited the recovery of important chemical compounds and elements through electrodeposition, electrowinning, electrocoagulation, electrodialysis, and other processes. The use of living organisms and microorganisms using an electrochemical perspective (known as bioelectrochemistry), is also calling attention to "mining", through plants and microorganisms, essential chemical elements. New process design or the optimization of the current technologies is a major necessity to enhance production and minimize the use of raw materials along with less generation of wastes and secondary by-products. In this context, this contribution aims to show an up-to-date scenario of both environmental electrochemical and bioelectrochemical processes for the extraction, use, recovery and recycling of materials in a circular economy model.

Metallic Nanowires Self-Assembled in Quasi-Circular Nanomolds Templated by DNA Origami.

The self-assembly of conducting nanostructures is currently being investigated intensively in order to evaluate the feasibility of creating novel nanoelectronic devices and circuits using such pathways. In particular, methods based on so-called DNA Origami nanostructures have shown great potential in the formation of metallic nanowires. The main challenge of this method is the reproducible generation of very well-connected metallic nanostructures, which may be used as interconnects in future devices. Here, we use a novel design of nanowires with a quasi-circular cross-section as opposed to rectangular or uncontrolled cross-sections in earlier studies. We find indications that the reliability of the fabrication scheme is enhanced and the overall resistance of the wires is comparable to metallic nanostructures generated by electrochemistry or top-down methods. In addition, we observe that some of the nanowires are annealed when passing a current through them, which leads to a clear enhancement for the conductance. We envision that these nanowires provide further steps towards the successful generation of nanoelectronics using self-assembly.

Carbon Nanomaterials-Based Screen-Printed Electrodes for Sensing Applications.

Electrochemical sensors consisting of screen-printed electrodes (SPEs) are recurrent devices in the recent literature for applications in different fields of interest and contribute to the expanding electroanalytical chemistry field. This is due to inherent characteristics that can be better (or only) achieved with the use of SPEs, including miniaturization, cost reduction, lower sample consumption, compatibility with portable equipment, and disposability. SPEs are also quite versatile; they can be manufactured using different formulations of conductive inks and substrates, and are of varied designs. Naturally, the analytical performance of SPEs is directly affected by the quality of the material used for printing and modifying the electrodes. In this sense, the most varied carbon nanomaterials have been explored for the preparation and modification of SPEs, providing devices with an enhanced electrochemical response and greater sensitivity, in addition to functionalized surfaces that can immobilize biological agents for the manufacture of biosensors. Considering the relevance and timeliness of the topic, this review aimed to provide an overview of the current scenario of the use of carbonaceous nanomaterials in the context of making electrochemical SPE sensors, from which different approaches will be presented, exploring materials traditionally investigated in electrochemistry, such as graphene, carbon nanotubes, carbon black, and those more recently investigated for this (carbon quantum dots, graphitic carbon nitride, and biochar). Perspectives on the use and expansion of these devices are also considered.

Study and voltammetric determination of fipronil in bovine lactose-free milk by differential pulse voltammetry using a carbon paste electrode.

A novel voltammetric screening method has been developed for the rapid determination of fipronil (FPN) residues in lactose-free milk samples with the use of a carbon-paste electrode (CPE) by differential-pulse voltammetry (DPV). Cyclic voltammetry indicated the occurrence of an irreversible anodic process at approximately +0.700 V (vs. Ag|AgCl, 3.0 mol L-1 KCl) in a 0.100 mol L-1 NaOH supporting electrolyte prepared as a 30% (v/v) ethanol-water solution. Quantification of FPN was carried out by DPV and analytical curves were constructed. In the absence of a matrix, the limits of detection (LOD) and quantification (LOQ) were 0.568 mg L-1 and 1.89 mg L-1, respectively. In the presence of a lactose-free skim milk matrix, the values of LOD and LOQ were 0.331 mg L-1 and 1.10 mg L-1. The recovery percentages for three different concentrations of FPN in lactose-free skim milk samples ranged between 95.3% and 109%. All assays could be conducted with milk samples without any prior extraction steps or pre-concentration of FPN, making this novel method rapid, simple, and relatively cheap.

Integrating machine learning and electrochemistry to develop a glucose biosensor assembled with Ganoderma applanatum lectin.

Fungal lectins have enormous biotechnological potential, but limited knowledge about their biochemical and biophysical features prevents their proper use. Herein, we report an innovative alternative to use Ganoderma applanatum lectin (GAL) as a glucose biorecognition element, after identifying the ideal electroanalytical conditions by machine learning studies performed with a homologous agglutinin from the same macrofungus. The research revealed that GAL has moderate resistance to pH (4-8) and temperature (20-60 °C) variations, but its hemagglutinating activity (376.5 HU mg-1 GAL at 20 °C) was better conserved under physiological conditions. Integrating electrochemical data and semi-empirical molecular modeling, biocompatible and electrostatically favorable conditions were found to immobilize the lectin on Prussian blue-modified glassy carbon electrode, after thermal activation of the metal-complex film. The glucose dose-response relationship obtained with the developed biosensor, defined as GAL/ta-PB/GCE, showed a typical Hill equation correlation, suggesting electrodic interactions represented by a sigmoidal mathematical function. GAL/ta-PB/GCE achieved remarkable electroanalytical performance, with emphasis on the detection limit (10.2 pM) and sensitivity (0.012 µA µM-1cm-2). The biosensor was successfully used to quantify glucose in pharmaceutical formulations, reiterating that the association of theoretical and experimental information drives important advances in bioelectrochemical studies.

Carbon Black Integrated Polylactic Acid Electrodes Obtained by Fused Deposition Modeling: A Powerful Tool for Sensing of Sulfanilamide Residues in Honey Samples.

Sulfanilamide (SFL) is used to prevent infections in honeybees. However, many regulatory agencies prohibit or establish maximum levels of SFL residues in honey samples. Hence, we developed a low-cost and portable electrochemical method for SFL detection using a disposable device produced through 3D printing technology. In the proposed approach, the working electrode was printed using a conductive filament based on carbon black and polylactic acid and it was associated with square wave voltammetry (SWV). Under optimized SWV parameters, linear concentration ranges (1-10 µmol L-1 and 12.5-35.0 µmol L-1), a detection limit of 0.26 µmol L-1 (0.05 mg L-1), and suitable RSD values (2.4% for inter-electrode; n = 3) were achieved. The developed method was selective in relation to other antibiotics applied in honey samples, requiring only dilution in the electrolyte. The recovery values (85-120%) obtained by SWV were statistically similar (95% confidence level) to those obtained by HPLC, attesting to the accuracy of the analysis and the absence of matrix interference.

Electrochemical immunosensing of low-density lipoprotein based on sol-gel encapsulation

Abstract Lipoprotein monitoring is desirable in the management of medical conditions such as atherosclerotic cardiovascular disease and coronary artery disease, in which controlling the concentration of these chylomicrons is crucial. Current clinical methods are complex and present poor reproducibility between laboratories. For these reasons, recent guidelines discard the assessment of low-density lipoprotein cholesterol (LDL-C) as a routine analysis during lipid-lowering therapies. Concerning the importance of monitoring this parameter, the authors present an electrochemical immunosensor constructed from a simple and easy-to-reproduce platform that allows detecting and quantifying LDL nanoparticles directly from human serum samples. The performance of the biosensor was studied by scanning electron microscopy, cyclic voltammetry, and electrochemical impedance spectroscopy. The biosensing platform displays good stability and linearity between 30 mg dL-1 and 135 mg dL-1 with a detection limit of 20 mg dL-1. The proposed biosensor can be easily employed for monitoring LDL concentration in clinical treatments.

Determination of hydroquinone and benzoquinone in pharmaceutical formulations: critical considerations on quantitative analysis of easily oxidized compounds.

Hydroquinone is a skin-lightening agent used as an active ingredient in topical dermatological formulations prescribed for treating cutaneous diseases caused by hyperpigmentation. Despite being widely used, some toxicological aspects have been associated with these products, mainly due to overdosage and long-term use combined with the easy oxidation of hydroquinone. In this work, an investigative study has been done to gather enough data for selecting a quantitative analytical method for quality control purposes that considers the ease of oxidation not only within the product but also during the experimental procedures. After studying the influence of pH, reversibility, sampling, and standard solution preparation on the redox reaction between hydroquinone and benzoquinone by using spectroscopic, electrophoretic, and electroanalytical measurements, a reliable, fast, and selective chronoamperometric method was achieved. The optimized method was used for the analysis of samples, previously diluted in Britton-Robinson (BR) buffer (pH 5.5) and methanol (1 : 9, v/v), by applying a potential fixed at 0.4 V. A glassy-carbon working electrode, lab-made Ag/AgCl(sat) and platinum wire as a reference electrode and auxiliary electrodes, respectively, and BR buffer (pH 5.5) as supporting electrolyte were the additional experimental conditions used. Analytical performance parameters were verified to confirm the applicability of the new method (LOD 4.22 µmol L-1 and LOQ 14.1 µmol L-1; recovery mean value of 100% with 0.22% RSD). A gel topical formulation containing 4% (w/w) hydroquinone was analyzed through the developed method for determination of dosage and oxidation traces, and a content of 3.53 ± 0.095% (w/w) was found with no indications of degradation.

Miniaturized Carbon Fiber Paper Electrodes for In Situ High Resolution NMR Analyses.

Combining spectroscopic techniques with electrochemistry is a promising strategy, as it allows the detailed investigation of the species that are consumed and produced by the reaction in real time. However, as with any in situ coupling technique, the junction between NMR and electrochemistry presents some challenges, notably the distortion of NMR signals due to the placement of electrodes close to or within the detection region. In this work, miniaturized electrodes made of carbon fiber paper were developed and later modified with platinum. Platinum decoration by cathodic deposition was chosen, as platinum is a prominent element in electrocatalysis, able to catalyze a large variety of reactions. To evaluate the efficiency of this electrochemical system, the oxidation of ascorbic acid was used as a model reaction. It was observed that the electrodes caused substantial signal distortion when placed within the detection region (full width at half-maximum equal to 1.46 Hz), whereas no distortion was observed when the electrodes were placed 1 mm above the detection region (full width at half-maximum equal to 0.95 Hz). With this system, it was also possible to monitor the magnetoelectrolysis effect, caused by the interaction of the magnetic field with the flowing ions, leading to a doubling of the ascorbic acid oxidation rate, compared to the reaction performed without a magnetic field. In addition to its low cost and simplicity in preparation, the developed electrode system allows the electrode surface to be easily modified with other suitable catalysts.

Voltammetric determination of sulfur in biodiesel microemulsion using a silver solid amalgam electrode.

Monitoring sulfur in biodiesel is of fundamental importance because even in low concentrations, it can harm the operation of the engine parts and increase the emission of toxic gases and particulate material. Hence, a simple, quick and sensitive adsorptive stripping voltammetry (AdSV) method based on a silver solid amalgam electrode (AgSAE) was developed to determine sulfur in biodiesel. The novel electrochemical method was evaluated through the linear sweep adsorptive stripping voltammetry (LSAdSV), square wave adsorptive stripping voltammetry (SWAdSV) and differential pulse adsorptive stripping voltammetry (DPAdSV) in a NH3/NH4+ buffer solution (pH 9.0), containing Na2SO3. The method was applied in biodiesel microemulsion samples under optimal conditions. To this end, a ternary phase diagram was constructed, employing three components: biodiesel/propan-1-ol/buffer solution. The microemulsion with the best response was found to be 25% NH3/NH4+ buffer (pH 9.0), 5.0% biodiesel and 70% propan-1-ol. The method reached a detection limit in the order of 10-7 mol L-1 of sulfur, and recovery values between 80% and 116%. The method was applied in the determination of sulfur in biodiesel, and the amount in the samples was found to be below the value stipulated by the regulatory agencies. The method can be a promising alternative for determining sulfur in the microemulsion of biodiesel, with the ability to provide a fast response regarding the quality of this biofuel.

Direct determination of boscalid in grape samples by differential pulse voltammetry using a carbon paste electrode.

A new methodology to determine directly the fungicide boscalid (BSC) was developed and successfully applied in red grape 100% juice, peel extracts, pulp and purple grape seeds (Vitis labrusca L.) with a working carbon paste electrode (CPE) without sample preparation. Cyclic voltammetry (CV) indicated the presence of an irreversible cathodic process of BSC at -1.21 V vs. Ag|AgCl (KCl 3.0 mol L-1) in a solution of 0.100 mol L-1 HCl/acetone 70 : 30 (v/v). This behavior was also observed using Square Wave Voltammetry (SWV). The Differential Pulse Voltammetry (DPV) technique proved to be more sensitive and with higher selectivity for BSC quantification. The influence of pH on the reduction of BSC was investigated in Britton-Robinson Buffer (BRB), 0.01 mol L-1 (pH 2.00-12.00). The limit of detection (LOD) values obtained from calibration curves for different samples were as follows: 0.107 mg L-1 for deionized water; 0.146 mg L-1 for red grape 100% juice; 0.922 mg kg-1 for peel extracts; 0.818 mg kg-1 for grape pulp and 0.691 mg kg-1 for grape seeds. The corresponding Limit of Quantification (LOQ) values for the same samples were as follows: 0.358 mg L-1; 0.486 mg L-1; 2.87 mg kg-1; 2.73 mg kg-1 and 2.51 mg kg-1, respectively. In addition, the recovery rates for the different concentration levels in the investigated range varied between 97.13 and 103.4%. All tests performed with the samples did not require extraction or pre-concentration steps of BSC, resulting in a fast, simple and cheap methodology.

CRISPR/Cas13-Based Approaches for Ultrasensitive and Specific Detection of microRNAs.

MicroRNAs (miRNAs) have a prominent role in virtually every aspect of cell biology. Due to the small size of mature miRNAs, the high degree of similarity between miRNA family members, and the low abundance of miRNAs in body fluids, miRNA expression profiling is technically challenging. Biosensors based on electrochemical detection for nucleic acids are a novel category of inexpensive and very sensitive diagnostic tools. On the other hand, after recognizing the target sequence, specific CRISPR-associated proteins, including orthologues of Cas12, Cas13, and Cas14, exhibit collateral nonspecific catalytic activities that can be employed for specific and ultrasensitive nucleic acid detection from clinically relevant samples. Recently, several platforms have been developed, connecting the benefits of enzyme-assisted signal amplification and enzyme-free amplification biosensing technologies with CRISPR-based approaches for miRNA detection. Together, they provide high sensitivity, precision, and fewer limitations in diagnosis through efficient sensors at a low cost and a simple miniaturized readout. This review provides an overview of several CRISPR-based biosensing platforms that have been developed and successfully applied for ultrasensitive and specific miRNA detection.

Advanced Oxidation Processes and Biotechnological Alternatives for the Treatment of Tannery Wastewater.

The tannery industry is one of the economic sectors that contributes to the development of different countries. Globally, Europe and Asia are the main producers of this industry, although Latin America and Africa have been growing considerably in recent years. With this growth, the negative environmental impacts towards different ecosystem resources as a result of the discharges of recalcitrated pollutants, have led to different investigations to generate alternative solutions. Worldwide, different technologies have been studied to address this problem, biological and physicochemical processes have been widely studied, presenting drawbacks with some recalcitrant compounds. This review provides a context on the different existing technologies for the treatment of tannery wastewater, analyzing the physicochemical composition of this liquid waste, the impact it generates on human health and ecosystems and the advances in the different existing technologies, focusing on advanced oxidation processes and the use of microalgae. The coupling of advanced oxidation processes with biological processes, mainly microalgae, is seen as a viable biotechnological strategy, not only for the removal of pollutants, but also to obtain value-added products with potential use in the biorefining of the biomass.

In situ drug release measuring in α-TCP cement by electrochemical impedance spectroscopy.

The use of drug delivery systems is a good technique to leave the right quantity of medicine in the patient's body in a suitable dose, because the drug application is delivered directly to the affected region. The current techniques such as HPLC and UV-Vis for the drug delivery calculation has some disadvantages, as the accuracy and the loss of the sample after characterization. With the aim of reducing the amount of material used during the characterization and have a non-destructive test with instantaneous results, the present paper shows the possibility of using electrochemical impedance spectroscopy (EIS) to have a drug delivery measurement during the release phenomena for a calcium phosphate cement (CFC) delivery system with gentamicin sulfate (GS) and lidocaine hydrochloride (LH), at a ratio of 1% and 2%, respectively. The equivalent circuit and the chemical mechanism involved during the measurements have been proposed as a tool to determine the drug delivery profile. The method has been compared with the UV-Vis technique. XRD was realized to verify conditions, before and after release. It was possible to verify the potential for using EIS as an instant technique to quantify drug delivery.

Fructose determination in fruit juices using an electrosynthesized molecularly imprinted polymer on reduced graphene oxide modified electrode.

The present work reports the development of a novel electrochemical sensor for the selective detection of fructose. The sensor was developed through electropolymerization of a molecularly imprinted polymer film on a reduced graphene oxide modified electrode. The modified electrode was characterized by cyclic voltammetry, electrochemical impedance spectroscopy, scanning electron microscopy, atomic force microscopy and RAMAN spectroscopy. Through the application of the modified electrode, the recognition of fructose molecules occurred in a concentration range of 1.0 × 10-14 to 1.0 × 10-11 mol L-1, under a Langmuir adsorption isothermal model. The sensitivity and limits of detection and quantification obtained for the sensor were 9.9 × 107 A L mol-1, 3.2 × 10-15 mol L-1 and 1.1 × 10-14 mol L-1, respectively. The analytical method used for the detection of fructose presented good reproducibility, stability and accuracy, and was successfully applied for the quantification of this sugar in orange, apple and grape juices.

Nanofibras de PCL associadas ao biovidro dopado: um novo biomaterial para engenharia tecidual / PCL nanofibers associated with doped bioglass: a new biomaterial for tissue engineering

O objetivo do estudo foi sintetizar e caracterizar fibras ultrafinas de policaprolactona (PCL) associadas a um novo biovidro 58S em duas diferentes rotas de produção, produzidas pelo processo de eletrofiação a fim de selecionar a melhor rota para a incorporação de íons terapêuticos e avaliar as diferenças entre as rotas e a influência dos íons. Soluções de PCL puro 20% e contendo 7% de biovidros dopados (10% Mg(NO3)2 e 5% Li2CO3), separadamente, foram submetidas ao processo de eletrofiação, onde foram utilizados três parâmetros fixos: 2 mLh-1 de razão de fluxo, 10 kV de voltagem e 12 cm de distância. As fibras obtidas foram caracterizadas morfológica (MEV, análise do diâmetro das fibras e análise da molhabilidade), química (EDS, DRX, FTIR e Raman) e biologicamente (viabilidade celular, conteúdo de proteína total, fosfatase alcalina e formação de nódulos de mineralização). Os resultados obtidos mostraram que a melhor rota foi a sol- gel precipitado, que foram dopados com íons terapêuticos (10% Mg(NO3)2 e 5% Li2CO3). Foi observada a aplicabilidade da referida metodologia em confeccionar um biomaterial aprimorado, que agregando as propriedades osteoindutoras do biovidro ao PCL e às dos íons terapêuticos, aplicável à regeneração óssea guiada apresentando respostas físicas, químicas e biológicas favoráveis ao comportamento celular

The aim of the study was to synthesize and characterize ultrafine polycaprolactone fibers (PCL) associated with a new 58S bioglass in two different production routes, produced by the electrospinning process in order to select the best route for the incorporation of therapeutic ions and differences as a difference between the routes and the influence of the ions. Solutions of pure PCL 20% and containing 7% doped bio-glass (10% Mg (NO3) 2 and 5% Li2CO3), requirements, were submitted to the electrospinning process, where three fixed parameters were used: 2 mLh-1 flow, 10 kV voltage and 12 cm distance. The curved fibers were characterized morphological (SEM, fiber diameter analysis and wettability analysis), chemical (EDS, DRX, FTIR and Raman) and biologically (cell viability, total protein content, alkaline phosphatase and formation of mineralization nodules). The results sought that the best route for a precipitated sol-gel, which were doped with therapeutic ions (10% Mg (NO3) 2 and 5% Li2CO3). It was observed the applicability of the methodology in making an improved biomaterial, which adding the osteoinductive properties of the bioglass to the PCL and those of the therapeutic ions, applicable to guided bone regeneration presenting physical, chemical and biological responses favorable to the cellular behavior

Dielectric properties of fresh rabbit meat in the microwave range.

Dielectric properties (DPs) of fresh rabbit meat in the microwave range (0.5 to 20 GHz) were determined. Three different muscles (Biceps femoris, Tensor fasciae latae, and Longissimus thoracis) from California rabbits (male and female) were measured with the open-ended coaxial probe method at temperatures of 20, 40, and 60 °C. To assess the possible effect of age, females of 100 and 180 days old were analyzed. DPs were affected by frequency, muscle type, age, gender, and temperature (p < 0.05). Dielectric constant decreased with increasing frequency. Loss factor decreased from 0.5 to 2.5 GHz due to ionic conduction, followed by an increase up to 20 GHz, dominated by dipolar relaxation. PRACTICAL APPLICATION: These results are key parameters for further quality sensing applications and for heating processes of meat rabbit using microwaves. Longer penetration depths were achieved at 915 MHz; this frequency is recommended for further applications. Besides, dielectric properties have potential to be a tool for identification of gender and age for slaughtered rabbits.

Electrochemical evidence of nitrate release from the nitrooxy compound 4-((nitrooxy) methyl)-3-nitrobenzoic acid and its antinociceptive and anti-inflammatory activities in mice.

Considering the many biological activities of nitric oxide (NO), some lines of research focused on the modulation of these activities through the provision of this mediator by designing and synthesizing compounds coupled with an NO donor group. Thus, the objectives of the present study were to carry out an electrochemical investigation of the nitrooxy compound 4-((nitrooxy) methyl)-3-nitrobenzoic acid (1) and evaluate its activities and putative mechanisms in experimental models of pain and inflammation. Voltammetric studies performed in aprotic medium (mimetic of membranes) showed important electrochemical reduction mechanisms: nitroaromatic reduction, self-protonation, and finally reductive elimination, which leads to nitrate release. Systemic administration of the nitrooxy compound (1) inhibited the nociceptive response induced by heat and the tactile hypersensitivity and paw edema induced by carrageenan in mice. The activities in the models of inflammatory pain and edema were associated with reduced neutrophil recruitment and production of inflammatory cytokines, such as interleukin (IL)-1ß, IL-6, tumor necrosis factor-α and CXCL-1, and increased production of IL-10. Concluding, electrochemical analysis revealed unequivocally that electron transfer at the nitro group of the nitrooxy compound (1) results in the cleavage of the organic nitrate, potentially resulting in the generation of NO. This electrochemical mechanism may be compared to a biochemical electron-transfer mediated nitrate release that, by appropriate in vivo bioreduction (enzymatic or not) would lead to NO production. Compound (1) exhibits activities in models of inflammatory pain and edema that may be due to reduced recruitment of neutrophils and production of inflammatory cytokines and increased production of IL-10. These results reinforce the interest in the investigation of NO donor compounds as candidates for analgesic and anti-inflammatory drugs.

Nanostructured functional peptide films and their application in C-reactive protein immunosensors.

Peptides with an active redox molecule are incorporated into nanostructured films for electrochemical biosensors with stable and controllable physicochemical properties. In this study, we synthesized three ferrocene (Fc)-containing peptides with the sequence Fc-Glu-(Ala)n-Cys-NH2, which could form self-assembled monolayers on gold and be attached to antibodies. The peptide with two alanines (n = 2) yielded the immunosensor with the highest performance in detecting C-reactive protein (CRP), a biomarker of inflammation. Using electrochemical impedance-derived capacitive spectroscopy, the limit of detection was 240 pM with a dynamic range that included clinically relevant CRP concentrations. With a combination of electrochemical methods and polarization-modulated infrared reflection-absorption spectroscopy, we identified the chemical groups involved in the antibody-CRP interaction, and were able to relate the highest performance for the peptide with n = 2 to chain length and efficient packing in the organized films. These strategies to design peptides and methods to fabricate the immunosensors are generic, and can be applied to other types of biosensors, including in low cost platforms for point-of-care diagnostics.