Effect of Mini-PEGs Modification on the Enzymatic Digestion of D-Amino Acid-Containing Peptides under the Action of PROK.

It was previously reported that D-amino acid-containing peptides exhibited the ability to resist enzymatic hydrolysis. This study investigated the influence of mini-PEGs modification on enzymatic hydrolysis ability of D-amino acid-containing peptides. The results showed that PEGylation promoted enzymatic hydrolysis of the D-amino acid-containing peptide, especially, the cleavage rate of the D-amino acid-containing peptide 6-w with PEG3 modification at the N-ends was up to 17 times higher in the presence of proteinase K (PROK) compared to those without PEG3 modification. Moreover, analysis of the enzymatic cleavage sites demonstrated a similar cleavage pattern of the PEGylated D-amino acid-containing peptide to that of the unmodified peptide. The computational simulations further showed that the enhanced enzymatic hydrolysis ability can be attributed to the strong interaction between PROK and the peptide after PEG3 modification and the resulting formation of a mature catalytic triad structure.

Evaluating the impact of X-ray damage on conformational heterogeneity in room-temperature (277†K) and cryo-cooled protein crystals.

Cryo-cooling has been nearly universally adopted to mitigate X-ray damage and facilitate crystal handling in protein X-ray crystallography. However, cryo X-ray crystallographic data provide an incomplete window into the ensemble of conformations that is at the heart of protein function and energetics. Room-temperature (RT) X-ray crystallography provides accurate ensemble information, and recent developments allow conformational heterogeneity (the experimental manifestation of ensembles) to be extracted from single-crystal data. Nevertheless, high sensitivity to X-ray damage at RT raises concerns about data reliability. To systematically address this critical issue, increasingly X-ray-damaged high-resolution data sets (1.02-1.52 Šresolution) were obtained from single proteinase K, thaumatin and lysozyme crystals at RT (277 K). In each case a modest increase in conformational heterogeneity with X-ray damage was observed. Merging data with different extents of damage (as is typically carried out) had negligible effects on conformational heterogeneity until the overall diffraction intensity decayed to ∼70% of its initial value. These effects were compared with X-ray damage effects in cryo-cooled crystals by carrying out an analogous analysis of increasingly damaged proteinase K cryo data sets (0.9-1.16 Šresolution). X-ray damage-associated heterogeneity changes were found that were not observed at RT. This property renders it difficult to distinguish real from artefactual conformations and to determine the conformational response to changes in temperature. The ability to acquire reliable heterogeneity information from single crystals at RT, together with recent advances in RT data collection at accessible synchrotron beamlines, provides a strong motivation for the widespread adoption of RT X-ray crystallography to obtain conformational ensemble information.

Quantitative analysis of factors determining the enzymatic degradation of poly(lactic acid).

The enzymatic degradation of poly(lactic acid) was catalyzed with Proteinase K and the effect of various factors on the rate of degradation was analyzed quantitatively with the help of appropriate kinetic models. The Michaelis-Menten model was modified for the purpose by considering the heterogeneous nature of the reaction and the denaturation of the enzyme. The results proved that Proteinase K degrades the polymer very efficiently. The rate of degradation increases considerably up to 0.1 mg/ml enzyme concentration, but remains constant at larger values. Temperature has an optimum at around 50 °C that is somewhat higher than the 37 °C extensively used in the literature as the most advantageous temperature. If degradation occurs in the same medium throughout the process, the formation of lactic acid results in the rapid decrease of pH and finally in the denaturation of the enzyme. The dropping of pH below 5 slows down and finally stops degradation completely. The daily change of the medium results in degradation with a constant rate and the entire amount of the polymer can be decomposed mainly into monomer or smaller oligomer fragments. Degradation rate decreases slightly with increasing molecular weight and increasing d-lactide content. The use of appropriate kinetic models allows quantitative analysis and the prediction of the rate of enzymatic degradation of PLA.

Cryo-EM demonstrates the in vitro proliferation of an ex vivo amyloid fibril morphology by seeding.

Several studies showed that seeding of solutions of monomeric fibril proteins with ex vivo amyloid fibrils accelerated the kinetics of fibril formation in vitro but did not necessarily replicate the seed structure. In this research we use cryo-electron microscopy and other methods to analyze the ability of serum amyloid A (SAA)1.1-derived amyloid fibrils, purified from systemic AA amyloidosis tissue, to seed solutions of recombinant SAA1.1 protein. We show that 98% of the seeded fibrils remodel the full fibril structure of the main ex vivo fibril morphology, which we used for seeding, while they are notably different from unseeded in vitro fibrils. The seeded fibrils show a similar proteinase K resistance as ex vivo fibrils and are substantially more stable to proteolytic digestion than unseeded in vitro fibrils. Our data support the view that the fibril morphology contributes to determining proteolytic stability and that pathogenic amyloid fibrils arise from proteolytic selection.

Speciation of Transition-Metal-Substituted Keggin-Type Silicotungstates Affected by the Co-crystallization Conditions with Proteinase K.

We report on the synthesis of the tetrasubstituted sandwich-type Keggin silicotungstates as the pure Na salts Na14[(A-α-SiW10O37)2{Co4(OH)2(H2O)2}]·37H2O (Na{SiW10Co2}2) and Na14[(A-α-SiW10O37)2{Ni4(OH)2(H2O)2}]·77.5H2O (Na{SiW10Ni2}2), which were prepared by applying a new synthesis protocol and characterized thoroughly in the solid state by single-crystal and powder X-ray diffraction, IR spectroscopy, thermogravimetric analysis, and elemental analysis. Proteinase K was applied as a model protein and the polyoxotungstate (POT)-protein interactions of Na{SiW10Co2}2 and Na{SiW10Ni2}2 were studied side by side with the literature-known K5Na3[A-α-SiW9O34(OH)3{Co4(OAc)3}]·28.5H2O ({SiW9Co4}) featuring the same number of transition metals. Testing the solution behavior of applied POTs under the crystallization conditions (sodium acetate buffer, pH 5.5) by time-dependent UV/vis spectroscopy and electrospray ionization mass spectrometry speciation studies revealed an initial dissociation of the sandwich POTs to the disubstituted Keggin anions HxNa5-x[SiW10Co2O38]3- and HxNa5-x[SiW10Ni2O38]3- ({SiW10M2}, M = CoII and NiII) followed by partial rearrangement to the monosubstituted compounds (α-{SiW11Co} and α-{SiW11Ni}) after 1 week of aging. The protein crystal structure analysis revealed monosubstituted α-Keggin POTs in two conserved binding positions for all three investigated compounds, with one of these positions featuring a covalent attachment of the POT anion to an aspartate carboxylate. Despite the presence of both mono- and disubstituted anions in a crystallization mixture, proteinase K selectively binds to monosubstituted anions because of their preferred charge density for POT-protein interaction.

Immobilization of Proteinase K for urine pretreatment to improve diagnostic accuracy of active tuberculosis.

The World Health Organization (WHO) calls for the development of a rapid, biomarker-based, non-sputum test capable of detecting all forms of tuberculosis (TB) at the point-of-care to enable immediate treatment initiation. Lipoarabinomannan (LAM) is the only WHO-endorsed TB biomarker that can be detected in urine, an easily collected sample matrix. For obtaining optimal sensitivity, we and others have shown that some form of sample pretreatment is necessary to remove background from patient urine samples. A number of systems are paper-based often destined for resource limited settings. Our current work presents incorporation of one such sample pretreatment, proteinase K (ProK) immobilized on paper (IPK) and test its performance in comparison to standard proteinase K (SPK) treatment that involves addition and deactivation at high temperature prior to performing a capture ELISA. Herein, a simple and economical method was developed for using ProK immobilized strips to pretreat urine samples. Simplification and cost reduction of the proposed pretreatment strip were achieved by using Whatman no.1 paper and by minimizing the concentration of ProK (an expensive but necessary reagent) used to pretreat the clinical samples prior to ELISA. To test the applicability of IPK, capture ELISA was carried out on either LAM-spiked urine or the clinical samples after pretreatment with ProK at 400 µg/mL for 30 minutes at room temperature. The optimal conditions and stability of the IPK were tested and validation was performed on a set of 25 previously analyzed archived clinical urine samples with known TB and HIV status. The results of IPK and SPK treated samples were in agreement showing that the urine LAM test currently under development has the potential to reach adult and pediatric patients regardless of HIV status or site of infection, and to facilitate global TB control to improve assay performance and ultimately treatment outcomes.

Serial crystallography using automated drop dispensing.

Automated, pulsed liquid-phase sample delivery has the potential to greatly improve the efficiency of both sample and photon use at pulsed X-ray facilities. In this work, an automated drop on demand (DOD) system that accelerates sample exchange for serial femtosecond crystallography (SFX) is demonstrated. Four different protein crystal slurries were tested, and this technique is further improved here with an automatic sample-cycling system whose effectiveness was verified by the indexing results. Here, high-throughput SFX screening is shown to be possible at free-electron laser facilities with very low risk of cross contamination and minimal downtime. The development of this technique will significantly reduce sample consumption and enable structure determination of proteins that are difficult to crystallize in large quantities. This work also lays the foundation for automating sample delivery.

Optimized protocols for in situ hybridization, immunohistochemistry, and immunofluorescence on skeletal tissue.

Assessment of gene and protein expression in tissue sections is instrumental in medical research. However, this is often challenging to perform on skeletal tissues that require prolonged decalcification and have poor adhesion to slides. In this study, we optimized selected steps of in situ hybridization (ISH), immunohistochemistry (IHC), and immunofluorescence (IF) for formalin fixed and decalcified skeletal tissues. Sections from distal femur of 6-, 8- and 14- week-old rats injected with BrdU with or without a hemizygous eGFP transgene expressed under the control of a ubiquitous promotor were used. We report that proteinase K digestion is critical for the sensitivity of ISH, as concentrations that were too strong and too mild both resulted in loss of signal. In addition, intensified RNase A digestion removed nonspecific riboprobe-mRNA hybrids. Furthermore, enzymatic antigen retrieval using proteinase K provided more consistent results in IHC and can therefore be a useful alternative to heat induced epitope retrieval (HIER) for skeletal tissues where such treatment often damages the morphology. A mild proteinase K digestion also improved IF detection of GFP and worked well for double labeling IF of GFP and osteocalcin on frozen sections of formalin fixed and decalcified rat bones while maintaining morphology. In summary, this study provides strategies to improve protocols for enzymatic digestion in ISH, IHC, and IF for skeletal tissues and also demonstrates the importance of careful optimization and validation with the use of these techniques.

Identification of amyloidogenic proteins in the microbiomes of a rat Parkinson's disease model and wild-type rats.

Cross seeding between amyloidogenic proteins in the gut is receiving increasing attention as a possible mechanism for initiation or acceleration of amyloid formation by aggregation-prone proteins such as αSN, which is central in the development of Parkinson's disease (PD). This is particularly pertinent in view of the growing number of functional (i.e., benign and useful) amyloid proteins discovered in bacteria. Here we identify two amyloidogenic proteins, Pr12 and Pr17, in fecal matter from PD transgenic rats and their wild type counterparts, based on their stability against dissolution by formic acid (FA). Both proteins show robust aggregation into ThT-positive aggregates that contain higher-order ß-sheets and have a fibrillar morphology, indicative of amyloid proteins. In addition, Pr17 aggregates formed in vitro showed significant resistance against FA, suggesting an ability to form highly stable amyloid. Treatment with proteinase K revealed a protected core of approx. 9 kDa. Neither Pr12 nor Pr17, however, affected αSN aggregation in vitro. Thus, amyloidogenicity does not per se lead to an ability to cross-seed fibrillation of αSN. Our results support the use of proteomics and FA to identify amyloidogenic protein in complex mixtures and suggests that there may be numerous functional amyloid proteins in microbiomes.

Autophagosome content profiling using proximity biotinylation proteomics coupled to protease digestion in mammalian cells.

The ascorbate peroxidase APEX2 is commonly used to study the neighborhood of a protein of interest by proximity-dependent biotinylation. Here, we describe a protocol for sample processing compatible with immunoblotting and mass spectrometry, suitable to specifically map the content of autophagosomes and potentially other short-lived endomembrane transport vesicles without the need of subcellular fractionation. By combining live-cell biotinylation with proteinase K digestion of cell homogenates, proteins enriched in membrane-protected compartments can be readily enriched and identified. For complete details on the use and execution of this protocol, please refer to Zellner et al. (2021).

Interwoven MOF-Coated Janus Cells as a Novel Carrier of Toxic Proteins.

Two major issues in cell-mediated drug delivery systems (c-DDS) are the availability of free cell surfaces for the binding of the cells to the target or to their microenvironment and internalization of the cytotoxic drug. In this study, the Janus structure, MOF nanoparticles, and tannic acid (TA) are utilized to address these issues. Janus carrier cells coated with metal-organic frameworks (MOFs) are produced by asymmetrically immobilizing the nanoparticles of a MOF based on zinc with cytotoxic enzymes that are internally encapsulated on the surface of carrier cells. By maintaining the biological and structural features of regular living cells, the MOF-coated Janus cells developed in the present study preserve the intrinsic binding capacity of the cells to their microenvironment. Interconnected MOFs loaded onto the other face of the Janus cells cannot penetrate the cell. Therefore, the carrier cells are protected from the cytotoxic drug contained in MOFs. These MOF-Janus carrier cells are demonstrated to successfully eliminate three-dimensional (3D) tumor spheroids when a chemotherapeutic protein of proteinase K is released from the MOF nanoparticles in an acid environment. The ease with which the MOF-Janus carrier cells are prepared (in 15 min), and the ability to carry a variety of enzymes and even multiple ones should make the developed system attractive as a general platform for drug delivery in various applications, including combination therapy.

Extraction-free protocol combining proteinase K and heat inactivation for detection of SARS-CoV-2 by RT-qPCR.

Real-time reverse transcription PCR (RT-qPCR) is the gold-standard technique for severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) detection in nasopharyngeal swabs specimens. The analysis by RT-qPCR usually requires a previous extraction step to obtain the purified viral RNA. Unfortunately, RNA extraction constitutes a bottleneck for early detection in many countries since it is expensive, time-consuming and depends on the availability of commercial kits. Here, we describe an extraction-free protocol for SARS-CoV-2 detection by RT-qPCR from nasopharyngeal swab clinical samples in saline solution. The method includes a treatment with proteinase K followed by heat inactivation (PK+HID method). We demonstrate that PK+HID improves the RT-qPCR performance in comparison to the heat-inactivation procedure. Moreover, we show that this extraction-free protocol can be combined with a variety of multiplexing RT-qPCR kits. The method combined with a multiplexing detection kit targeting N and ORF1ab viral genes showed a sensitivity of 0.99 and a specificity of 0.99 from the analysis of 106 positive and 106 negative clinical samples. In conclusion, PK+HID is a robust, fast and inexpensive procedure for extraction-free RT-qPCR determinations of SARS-CoV-2. The National Administration of Drugs, Foods and Medical Devices of Argentina has recently authorized the use of this method.

Rapid and Extraction-Free Detection of SARS-CoV-2 from Saliva by Colorimetric Reverse-Transcription Loop-Mediated Isothermal Amplification.

BACKGROUND: Rapid, reliable, and widespread testing is required to curtail the ongoing COVID-19 pandemic. Current gold-standard nucleic acid tests are hampered by supply shortages in critical reagents including nasal swabs, RNA extraction kits, personal protective equipment, instrumentation, and labor. METHODS: To overcome these challenges, we developed a rapid colorimetric assay using reverse-transcription loop-mediated isothermal amplification (RT-LAMP) optimized on human saliva samples without an RNA purification step. We describe the optimization of saliva pretreatment protocols to enable analytically sensitive viral detection by RT-LAMP. We optimized the RT-LAMP reaction conditions and implemented high-throughput unbiased methods for assay interpretation. We tested whether saliva pretreatment could also enable viral detection by conventional reverse-transcription quantitative polymerase chain reaction (RT-qPCR). Finally, we validated these assays on clinical samples. RESULTS: The optimized saliva pretreatment protocol enabled analytically sensitive extraction-free detection of SARS-CoV-2 from saliva by colorimetric RT-LAMP or RT-qPCR. In simulated samples, the optimized RT-LAMP assay had a limit of detection of 59 (95% confidence interval: 44-104) particle copies per reaction. We highlighted the flexibility of LAMP assay implementation using 3 readouts: naked-eye colorimetry, spectrophotometry, and real-time fluorescence. In a set of 30 clinical saliva samples, colorimetric RT-LAMP and RT-qPCR assays performed directly on pretreated saliva samples without RNA extraction had accuracies greater than 90%. CONCLUSIONS: Rapid and extraction-free detection of SARS-CoV-2 from saliva by colorimetric RT-LAMP is a simple, sensitive, and cost-effective approach with broad potential to expand diagnostic testing for the virus causing COVID-19.

Ligand Incorporation into Protein Microcrystals for MicroED by On-Grid Soaking.

A high throughout method for soaking ligands into protein microcrystals on TEM grids is presented. Every crystal on the grid is soaked simultaneously using only standard cryoelectron microscopy vitrification equipment. The method is demonstrated using proteinase K microcrystals soaked with the 5-amino-2,4,6-triodoisophthalic acid (I3C) magic triangle. A soaked microcrystal is milled to a thickness of approximately 200 nm using a focused ion beam, and MicroED data are collected. A high-resolution structure of the protein with four ligands at high occupancy is determined. Both the number of ligands bound and their occupancy is higher using on-grid soaking of microcrystals compared with much larger crystals treated similarly and investigated by X-ray crystallography. These results indicate that on-grid soaking ligands into microcrystals results in efficient uptake of ligands into protein microcrystals.

Rapid, convenient and efficient kit-independent detection of SARS-CoV-2 RNA.

Pandemic SARS-CoV-2 infection has rapidly developed into a socioeconomic and humanitarian catastrophe. Basic principles to prevent SARS-CoV-2 transmission are social distancing, face masks, contact tracing and early detection of SARS-CoV-2. To meet these requirements, virtually unlimited test capacities delivering results in a rapid and reliable manner are a prerequisite. Here, we provide and validate such a rapid, convenient and efficient kit-independent detection of SARS-CoV-2 RNA, termed COVID-quick-DET. This straightforward method operates with simple proteinase K treatment and repetitive heating steps with a sensitivity of 94.6% in head-to-head comparisons with kit-based isolation methods. This result is supported by data obtained from serially diluted SARS-CoV-2 virus stocks. Given its cost- and time-effective operation, COVID-quick-DET might be best suited for countries with general shortage or temporary acute scarcity of resources and equipment.

Fragment-based determination of a proteinase K structure from MicroED data using ARCIMBOLDO_SHREDDER.

Structure determination of novel biological macromolecules by X-ray crystallography can be facilitated by the use of small structural fragments, some of only a few residues in length, as effective search models for molecular replacement to overcome the phase problem. Independence from the need for a complete pre-existing model with sequence similarity to the crystallized molecule is the primary appeal of ARCIMBOLDO, a suite of programs which employs this ab initio algorithm for phase determination. Here, the use of ARCIMBOLDO is investigated to overcome the phase problem with the electron cryomicroscopy (cryoEM) method known as microcrystal electron diffraction (MicroED). The results support the use of the ARCIMBOLDO_SHREDDER pipeline to provide phasing solutions for a structure of proteinase K from 1.6 Šresolution data using model fragments derived from the structures of proteins sharing a sequence identity of as low as 20%. ARCIMBOLDO_SHREDDER identified the most accurate polyalanine fragments from a set of distantly related sequence homologues. Alternatively, such templates were extracted in spherical volumes and given internal degrees of freedom to refine towards the target structure. Both modes relied on the rotation function in Phaser to identify or refine fragment models and its translation function to place them. Model completion from the placed fragments proceeded through phase combination of partial solutions and/or density modification and main-chain autotracing using SHELXE. The combined set of fragments was sufficient to arrive at a solution that resembled that determined by conventional molecular replacement using the known target structure as a search model. This approach obviates the need for a single, complete and highly accurate search model when phasing MicroED data, and permits the evaluation of large fragment libraries for this purpose.

High-throughput in situ experimental phasing.

In this article, a new approach to experimental phasing for macromolecular crystallography (MX) at synchrotrons is introduced and described for the first time. It makes use of automated robotics applied to a multi-crystal framework in which human intervention is reduced to a minimum. Hundreds of samples are automatically soaked in heavy-atom solutions, using a Labcyte Inc. Echo 550 Liquid Handler, in a highly controlled and optimized fashion in order to generate derivatized and isomorphous crystals. Partial data sets obtained on MX beamlines using an in situ setup for data collection are processed with the aim of producing good-quality anomalous signal leading to successful experimental phasing.

Structure Determination from Lipidic Cubic Phase Embedded Microcrystals by MicroED.

The lipidic cubic phase (LCP) technique has proved to facilitate the growth of high-quality crystals that are otherwise difficult to grow by other methods. However, the crystal size optimization process could be time and resource consuming, if it ever happens. Therefore, improved techniques for structure determination using these small crystals is an important strategy in diffraction technology development. Microcrystal electron diffraction (MicroED) is a technique that uses a cryo-transmission electron microscopy to collect electron diffraction data and determine high-resolution structures from very thin micro- and nanocrystals. In this work, we have used modified LCP and MicroED protocols to analyze crystals embedded in LCP converted by 2-methyl-2,4-pentanediol or lipase, including Proteinase K crystals grown in solution, cholesterol crystals, and human adenosine A2A receptor crystals grown in LCP. These results set the stage for the use of MicroED to analyze microcrystalline samples grown in LCP, especially for those highly challenging membrane protein targets.

Purification of LPS from Leptospira.

Leptospira species are one of the few spirochetes to possess a lipopolysaccharide (LPS) embedded in their outer membrane. Two protocols are currently available to extract and/or purify the leptospiral lipopolysaccharides: the rapid proteinase K method and the classical hot water/phenol extraction. The first method allows to get a quick overview of the LPS O antigen structure, whereas the second method is fitted to study the immunological properties of the leptospiral LPS. These two methods will be detailed in this chapter. Methodologies to assess the quality of the purification, such as the modified silver staining coloration, will also be reviewed. Both advantages and limitations of the different analyses will be described.

Continuous Flow Reactors from Microfluidic Compartmentalization of Enzymes within Inorganic Microparticles.

Compartmentalization and selective transport of molecular species are key aspects of chemical transformations inside the cell. In an artificial setting, the immobilization of a wide range of enzymes onto surfaces is commonly used for controlling their functionality but such approaches can restrict their efficacy and expose them to degrading environmental conditions, thus reducing their activity. Here, we employ an approach based on droplet microfluidics to generate enzyme-containing microparticles that feature an inorganic silica shell that forms a semipermeable barrier. We show that this porous shell permits selective diffusion of the substrate and product while protecting the enzymes from degradation by proteinases and maintaining their functionality over multiple reaction cycles. We illustrate the power of this approach by synthesizing microparticles that can be employed to detect glucose levels through simultaneous encapsulation of two distinct enzymes that form a controlled reaction cascade. These results demonstrate a robust, accessible, and modular approach for the formation of microparticles containing active but protected enzymes for molecular sensing applications and potential novel diagnostic platforms.