RESUMEN
¼ Reuse of orthopaedic equipment is one of many potential ways to minimize the negative impact of used equipment on the environment, rising healthcare costs and disparities in access to surgical care.¼ Barriers to widespread adoption of reuse include concerns for patient safety, exposure to unknown liability risks, negative public perceptions, and logistical barriers such as limited availability of infrastructure and quality control metrics.¼ Some low- and middle-income countries have existing models of equipment reuse that can be adapted through reverse innovation to high-income countries such as the United States.¼ Further research should be conducted to examine the safety and efficacy of reusing various orthopaedic equipment, so that standardized guidelines for reuse can be established.
Asunto(s)
Equipo Ortopédico , Humanos , Estados UnidosRESUMEN
PURPOSE: Maintaining vertical position and moving are essential to healthy development. Children with motor difficulties may need assistive devices to stand upright or move. The Dynamic Scaffolding System (DSS) device was developed to support these skills. This study aims to explain the DSS's developmental stages, compare the device's usage times based on diagnoses and motor impairment, and investigate the degree of satisfaction among parents of children using the device. MATERIALS AND METHODS: The study included children with difficulty standing or stepping and their parents. We compared usage times of DSS depending on diagnosis (cerebral palsy (CP) or other diagnoses) and motor impairment levels. We assessed parental satisfaction by using the Quebec User Evaluation of Satisfaction with Assistive Technology (QUEST 2.0) and recorded adverse events. RESULTS: The ages of the participants (n:100) were between 9 and 108 months (44.94 ± 17.59), and 60% of the children had CP, and 40% had other diagnoses (genetic, metabolic, neuromuscular diseases). The duration of daily use of DSS ranged from 44.17 (±26.16) to 110 (±97.98) minutes, and the duration was similar among children at different levels of motor impairment (p = 0.262). The parents were most satisfied with the size, simplicity of use, and effectiveness, and they were least satisfied with the ease of adjustment, safety, and durability. They did not report any adverse events during the study. CONCLUSIONS: DSS can be considered a useable assistive device option for children with CP and other diagnoses with difficulty standing or stepping and a satisfactory device for parents of such children.
The Dynamic Scaffolding System (DSS) is a useable trunk-supported adaptive walker for children with moderate to severe motor impairment.Parents are most satisfied with DSS's size, simplicity of use, and effectiveness.Children with moderate and severe motor impairment have similar duration of daily use time of DSS.
Asunto(s)
Parálisis Cerebral , Niños con Discapacidad , Dispositivos de Autoayuda , Niño , Humanos , Equipo Ortopédico , PadresRESUMEN
BACKGROUND: Orthopedic technical care plays a crucial role in improving function and mobility for patients undergoing limb lengthening and reconstruction. The treatment strategy is based on a precise classification of the defect, taking into account factors such as joint instability, muscle pathology and limb length discrepancy. CHOICE OF AIDS: The selection of orthopedic aids depends on the specific deformity, its classification and the individual needs of the patient. Through interdisciplinary decision-making and customized adaptations of prostheses and orthoses, optimal function and aesthetically pleasing outcomes can be achieved. The utilization of custom-made technical components, such as traction devices combined with elastic liners, is essential for long-term treatment success and can support surgical interventions. The treating physician's expertise is crucial in selecting the appropriate orthopedic technical device following limb lengthening and reconstruction.
Asunto(s)
Síndrome de Inmunodeficiencia Adquirida , Alargamiento Óseo , Humanos , Diferencia de Longitud de las Piernas/cirugía , Extremidades , Equipo OrtopédicoRESUMEN
PURPOSE: The primary aim of this study was to report complications during the first year after trapeziectomy with Weilby sling using a standardized tool designed by the International Consortium for Health Outcome Measures. The secondary aim was to determine the association of complications and patient-reported outcomes 12 months after surgery. METHODS: We included patients who underwent trapeziectomy with Weilby sling between November 2013 and December 2018. All complications during the first year were scored using the International Consortium for Health Outcomes Measurement Complications in Hand and Wrist conditions (ICHAW) tool. Pain and hand function were measured before surgery and 12 months after surgery using the Michigan Hand Outcomes Questionnaire (MHQ). Minimally Important Change thresholds of 18.6 for MHQ pain and 9.4 for MHQ function were used to determine clinical importance. RESULTS: Of 531 patients after trapeziectomy with Weilby sling, 65% had an uneventful recovery, 16% experienced ICHAW Grade 1 deviations only, and 19% experienced Grade 2 or 3 deviations, including requiring antibiotics, corticosteroid injections, or additional surgery. On average, patients improved in pain and hand function, even in the presence of ICHAW events. Although all ICHAW grades were associated with poorer patient-reported outcomes 12 months after surgery, Grade 2 and 3 exceeded the Minimally Important Change threshold for pain and/or function. CONCLUSIONS: In 531 patients, 65% had an uneventful recovery, 16% experienced ICHAW Grade 1 deviations only, and 19% experienced grade 2 or 3 deviations. We recommend describing Grade 1 as "adverse protocol deviations" and grade 2 and 3 as complications, because of clinically relevant poorer patient-reported outcomes 12 months after surgery. The ICHAW is a promising tool to evaluate systematically and compare complications in hand surgery, although we recommend further evaluation. TYPE OF STUDY/LEVEL OF EVIDENCE: Therapeutic IV.
Asunto(s)
Articulaciones Carpometacarpianas , Hueso Trapecio , Humanos , Estudios de Cohortes , Prevalencia , Hueso Trapecio/cirugía , Pulgar/cirugía , Equipo Ortopédico , Articulaciones Carpometacarpianas/cirugíaRESUMEN
The objective of this study was to characterize recent trends in orthopedic device development across different subspecialty areas. Orthopedic 510(k) clearances, premarket approvals (PMAs; together, "authorizations"), and new market entrants from 2000 to 2019 were analyzed as markers of research and development activity. Data were extracted from the US Food and Drug Administration website and stratified into one of 9 "subspecialty" groups: spine, trauma, hip arthroplasty, knee arthroplasty, shoulder, hand/elbow, foot/ankle, cement/filler/graft, and other. Descriptive statistics were used to analyze the data. Growth rates were calculated from trailing 3-year averages. During the study period, there were 9906 orthopedic 510(k) clearances and 1409 PMAs, of which 61 were for original PMA submissions. The preponderance of 510(k) clearances were for devices used in spine (36%) and trauma (30%) surgery, followed by hip (11%) and knee (8%) arthroplasty. Annual 510(k) clearances for spine and trauma devices grew by 232% and 44%, respectively, whereas annual hip and knee arthroplasty clearances declined. Paralleling these findings, the influx of new manufacturers of orthopedic devices was greatest for the trauma surgery (438), spine surgery (383), and cement/filler/graft (181) markets. Spinal surgery and orthopedic trauma have become leading priorities in orthopedic product development during the past two decades. Meanwhile, hip and knee arthroplasty products have proportionally become a smaller category of new devices over time. These findings demonstrate changing priorities within orthopedic innovation. [Orthopedics. 2023;46(2):e98-e104.].
Asunto(s)
Artroplastia de Reemplazo de Rodilla , Artroplastia de Reemplazo , Ortopedia , Humanos , Equipo OrtopédicoRESUMEN
PURPOSE: To measure and compare progression in children's power mobility skill among process and task-based measures following a loan of one of four early power mobility devices. Additionally, to explore different power mobility learner groups and skill development trajectories. METHODS: In this pre-post study, children were purposefully sampled and power mobility skill was measured from video taken pre-post several months' experience (mean 192.40; SD 42.79 days) using the Assessment of Learning Powered mobility use (ALP) and two task-based measures. Associations among power mobility skill measures were examined. Child and environmental factors influencing ALP phase at loan-end were explored. RESULTS: Forty-six children aged 13 - 68 months (mean 40.40; SD 15.60) participated, with cerebral palsy being the most common condition (n = 33; 71.74%). ALP change scores ranged from -2 to +4 ALP phases (median 1.0). Wilcoxon signed rank test was significant for pre-post differences with a large effect size (z = 5.50, p < 0.001; r = 0.57). End-of-loan Spearman correlations between ALP and two task-based paediatric measures were excellent (rs = 0.92). Kruskal-Wallis test revealed significant effect of device, access method, diagnostic group and communication abilities on loan-end ALP phase. CONCLUSION: Positive change was demonstrated with most children (n = 39; 84.78%) changing at least one ALP phase during the study. Positive change was seen with children at all phases of tool-use, using all devices and access methods. Process and task-based measures were highly correlated, but differed in application for different learner groups. Different trajectories of skill development may be associated with different child profiles and access abilities.IMPLICATIONS FOR REHABILITATIONChildren at all phases of tool-use can demonstrate positive change in power mobility skill using different devices and switch as well as joystick access methodsThe Assessment of Learning Powered mobility use (ALP) is useful for assessing tool-use and learning process skills for young children across the power mobility skill continuum.Task-based measures may also be helpful for guiding training and recording progress; The Power Mobility Training Tool (PMTT) is most useful for children exploring cause-effect and direction (ALP Phases 1-5), while the Power Mobility Program (PMP) is most useful for functional learners and those progressing from exploring direction to functional use (ALP Phases 5-8).Access method may influence power mobility learning trajectory and training.
Asunto(s)
Parálisis Cerebral , Dispositivos de Autoayuda , Silla de Ruedas , Niño , Humanos , Preescolar , Aprendizaje , Equipo OrtopédicoRESUMEN
PURPOSE: The purpose of this study was to examine factors associated with variability in time from assessment to device delivery (cycle time). Our hypothesis was that device type and type of insurance would be the strongest predictor of cycle time. MATERIALS AND METHODS: Data were extracted from the Functional Mobility Assessment/Uniform Dataset (FMA/UDS) Registry that at the time of analysis contained a sample of 2588 people with disabilities (PWD) who were provided with a wheeled mobility device (WMD) between 21 March 2016 and 29 June 2021. To examine the effect of individual factors on the variability in cycle time, a robust linear regression analysis was conducted. RESULTS: The average national cycle time was 101.5 (SD = 59.9) d. Geographic area (Capital Metro [p < .001], Great Lakes [p = .016], and Northeast area [p < .001]), higher years since onset of disability (p < .001) and customizable devices (p = .021) were associated with higher cycle time. Non-customizable devices (p = .005), scooters (p < .001), Group 2 power wheelchairs (PWCs; p < .001), and funding source (Medicaid managed care (p < .001) and "other" (p = .028)) were associated with lower cycle time. CONCLUSIONS: Longer cycle time is likely related to variations in clinical practice, insurance coverage criteria and the level of customizability of the device needed for a particular diagnosis, especially long-term disabilities.Implications for rehabilitationThe national average number of days between initial evaluation and device delivery (cycle time) to deliver a wheeled mobility device (WMD) varies based on specific variables such as type of WMD, diagnosis and payer source.Geographic area, years since onset of disability, device type, primary diagnosis and funding source significantly impact cycle times.Increased complexity of the WMD, both manual and power wheelchairs (PWCs), was associated with longer cycle times.As more service delivery models emerge, specific benefits and challenges need to be reported on how they impact cycle time.
Asunto(s)
Personas con Discapacidad , Dispositivos de Autoayuda , Silla de Ruedas , Humanos , Estudios Transversales , Equipo OrtopédicoRESUMEN
BACKGROUND: There is limited evidence on the strategies, resources, and tools shown to improve winter mobility and community participation. OBJECTIVE: This paper describes a multifaceted approach taken to develop an mHealth application that provides information, resources, and strategies to facilitate winter mobility for mobility device users, service providers, community organisations, and researchers. METHODS: The study was conducted in three phases: (1) A scoping review of peer-reviewed and grey literature was completed to identify literature that reported on tools, strategies, resources, and recommendations used to promote winter mobility; (2) Online asynchronous focus groups were conducted to identify the type of content that mobility device users wanted to include in the web-based application; and (3) A prototype mHealth application was developed based on the findings from the previous phases. Using a rapid prototyping process that included stakeholder review through an online survey, four cycles of application design and development were undertaken. RESULTS: The scoping review identified 23 peer-reviewed studies and limited grey literature on winter mobility strategies, resources and recommendations. Twenty-four participants from across Canada engaged in one of five focus groups. Focus group analysis led to the development of the content categories for the mHealth application. The initial prototype application developed was reviewed by; 27 mobility device users, 16 health care providers, and seven consumer organisation representatives identified areas of strength and further refinement in regard to application design. CONCLUSIONS: The approach used in this study provided a method to develop an application based on the ideas, needs, and interests of a variety of stakeholders. Once fully developed, the application has the potential to fill the gaps related to the lack of a unified collection of winter mobility strategies and resources, and open the dialogue on methods to improve winter participation among mobility device users.IMPLICATIONS FOR REHABILITATIONDespite winter conditions being a common challenge among mobility device users, there is an absence of an organised approach towards helping individuals manage their winter mobility needs.As the development and usage of mHealth applications continues to increase, it is valuable to use methods of designing applications based on the ideas, needs, and interests of a variety of stakeholders.Development of a framework for collating information on winter mobility strategies and resources is the first step towards launching an mHealth application.
Asunto(s)
Aplicaciones Móviles , Dispositivos de Autoayuda , Telemedicina , Humanos , Grupos Focales , Equipo Ortopédico , Telemedicina/métodosRESUMEN
PURPOSE: Design an extended osteotomy guide (EOG) for Le Fort I osteotomy to improve the safety of surgery. MATERIALS AND METHODS: The digital Le Fort I osteotomy guide was designed in MIMICS 23.0. Twenty-eight patients were randomized into 2 groups. Patients in the experimental group used EOG, and patients in the control group used a traditional osteotomy guide (TOG). Virtual designs and actual postoperative outcomes were compared by cone-beam computed tomography. The safety of the operation was confirmed by the accuracy of the osteotomy direction and depth on the inner and posterior walls of the maxilla. RESULTS: All positioning deviations of both osteotomy guides were <0.3 mm (P>0.05). The osteotomy depths on the inner and posterior walls with the EOG and TOG deviated by 0.789±1.179 and 1.811±1.345 mm (P=0.004) and 0.648±0.999 and 1.262±0.942 mm (P=0.030), respectively. The angles of deviation of the osteotomy direction on the inner and posterior walls by the EOG and TOG were 2.025±2.434 and 5.069±2.391 degrees (P<0.001) and 2.772±2.979 and 8.653±4.690 degrees (P<0.001), respectively. CONCLUSIONS: The EOG was more accurate than TOG for manipulating osteotomy direction and depth on the inner and posterior maxillary walls. Thus, EOG could ensure higher surgical safety than TOG.
Asunto(s)
Maxilar , Osteotomía Maxilar , Cefalometría/métodos , Tomografía Computarizada de Haz Cónico/métodos , Humanos , Maxilar/diagnóstico por imagen , Maxilar/cirugía , Equipo Ortopédico , Osteotomía Le Fort/métodosRESUMEN
Bone milling force is a key factor to be controlled during the orthopedic surgery. Cutting force has significant influence on the breaking of the tools or causing bone cracks. The cutting force depends on machining parameters, cutting tools and the cortical bone tissue. In this paper, rotational speed, feed rate, cutting depth, tool diameter and the osteon orientation are considered as input parameters. For statistical modeling and experimental study, the response surface method was used. Moreover, using the Sobol statistical sensitivity analysis method the effect of each input parameter on the process force is investigated both qualitatively and quantitatively. Results revealed that bone milling force decreases with increasing rotational speed while it increases with feed rate due to an increase in the thickness of the deformed chip as well as an escalation of friction. Moreover, increasing cutting depth due to increased thickness of the deformed chip, increases friction and thus increases cutting force. Additionally, as the diameter of the blade increases, the cutting force increases. Finally, in the perpendicular direction to the osteon, less force is applied to the bone tissue than that of parallel to osteon. Based on Sobol sensitivity analysis, cutting depth (51.4%), feed rate (21.9%), tool rotational speed (19%), milling direction (4.8%) and tool diameter (1.9%) are the most effective respectively. Response optimization was also presented using Derringer algorithm, which provided a minimum cutting force of 3.76 N, when tool diameter of 4 mm, rotational speed of 3000 rpm and feed rate of 100 mm/min and cutting depth of 1 mm were selected in milling perpendicular to the osteon orientation. This research can be used to optimize milling parameters in order to assist robotic surgery and orthopedic tool design.
Asunto(s)
Hueso Cortical , Ortopedia , Huesos , Hueso Cortical/cirugía , Fenómenos Mecánicos , Equipo Ortopédico , Ortopedia/métodosRESUMEN
Low physical activity (PA) and high sedentary behavior (SB) place residents in assisted living at risk for physical decline, but little is known about factors that influence PA/SB in this setting. In the current cross-sectional study, we described objectively measured PA/SB (activPAL™) and examined the relationships between PA/SB and use of an assistive walking device, depression, sleep disturbance, pain, fatigue, social isolation, and the tendency to make social comparisons. Fifty-four residents from eight assisted living facilities participated. Mean time spent in PA was 252.9 (SD = 134.3) minutes/day. Mean time spent in SB was 660.8 (SD = 181.4) minutes/day. Depression predicted PA (R2 = 0.16). Residents using an assistive device spent significantly more time in SB (p = 0.02). Fatigue correlated with time in longer bouts of SB (r = 0.19, p = 0.04). The tendency to make social comparisons correlated with SB (r = 0.22, p = 0.04). Findings show residents in assisted living are inactive and further research is needed to fully understand factors that influence PA/SB. [Research in Gerontological Nursing, 15(3), 117-123.].
Asunto(s)
Instituciones de Vida Asistida , Ejercicio Físico , Conducta Sedentaria , Acelerometría , Estudios Transversales , Depresión/etiología , Ejercicio Físico/fisiología , Ejercicio Físico/psicología , Fatiga/etiología , Humanos , Equipo Ortopédico , Comparación Social , CaminataRESUMEN
PURPOSE: We assess feasibility of wearable gait analysis in geriatric wards by testing the effectiveness and acceptance of the system. METHODS: Gait parameters of 83 patients (83.34 ± 5.88 years, 58/25 female/male) were recorded at admission and/or discharge to/from two geriatric inpatient wards. Gait parameters were tested for statistically significant differences between admission and discharge. Walking distance measured by a wearable gait analysis system was correlated with distance assessed by physiotherapists. Examiners rated usability using the system usability scale. Patients reported acceptability on a five-point Likert-scale. RESULTS: The total distance measures highly correlate (r = 0.89). System Usability Scale is above the median threshold of 68, indicating good usability. Majority of patients does not have objections regarding the use of the system. Among other gait parameters, mean heel strike angle changes significantly between admission and discharge. CONCLUSION: Wearable gait analysis system is objectively and subjectively usable in a clinical setting and accepted by patients. It offers a reasonably valid assessment of gait parameters and is a feasible way for instrumented gait analysis.
Asunto(s)
Análisis de la Marcha , Dispositivos Electrónicos Vestibles , Anciano , Femenino , Marcha , Humanos , Masculino , Equipo Ortopédico , Alta del PacienteRESUMEN
While performing musculoskeletal long bone fracture reduction surgery, assistant surgeons can often suffer from physical fatigue as they provide resistance against the tension from surrounding muscles pulling on the patient's broken bones. These days, robotic systems are being actively developed to mitigate this physical workload by realigning and holding these fractured bones for surgeons. This has led to one consortium proposing the development of a robot-assisted fracture reduction system consisting of a 6-DOF positioning robot along with a 1-DOF traction device. With the introduction of the 1-DOF traction device, the positioning robot does not have to fight these contraction forces so can be compact improving its maneuverability and overall convenience; however, considering surgeon-robot interactions, this approach adds the requirement of controlling two different types of robots simultaneously. As such, an advanced cooperative control methodology is required to control the proposed bone fracture reduction robot system. In this paper, a human-robot-robot cooperative control (HRRCC) scheme is proposed for collaboration between the surgeon, the positioning robot, and the traction device. First, the mathematical background of this HRRCC scheme is provided. Next, we describe a series of experiments that show how the proposed scheme facilitates a reduction in the load placed on the positioning robot from strong muscular contraction forces making it possible to conduct fracture reduction procedures more safely despite the muscular forces.
Asunto(s)
Fracturas Óseas , Robótica , Fijación de Fractura , Fracturas Óseas/cirugía , Humanos , Equipo Ortopédico , TracciónRESUMEN
OBJECTIVE: Are physical therapy or orthopaedic equipment efficacious in reducing the biomechanical risk factors in people with tibiofemoral osteoarthritis (OA)? Is there a better therapeutic intervention than others to improve these outcomes? DESIGN: Systematic review with network meta-analysis (NMA) of randomised trials. DATA SOURCES: PubMed, Web of Science, Cochrane Library, Embase and MEDLINE were searched through January 2021. ELIGIBILITY CRITERIA FOR SELECTING STUDIES: We included randomised controlled trials exploring the benefits of using physical therapy or orthopaedic equipment in reducing the biomechanical risk factors which included knee adduction moment (KAM) and knee adduction angular impulse (KAAI) in individuals with tibiofemoral OA. DATA EXTRACTION AND SYNTHESIS: Two authors extracted data independently and assessed risk of bias. We conducted an NMA to compare multiple interventions, including both direct and indirect evidences. Heterogeneity was assessed (sensitivity analysis) and quantified (I2 statistic). Grading of Recommendations Assessment, Development and Evaluation assessed the certainty of the evidence. RESULTS: Eighteen randomised controlled trials, including 944 participants, met the inclusion criteria, of which 14 trials could be included in the NMA. Based on the collective probability of being the overall best therapy for reducing the first peak KAM, lateral wedge insoles (LWI) plus knee brace was closely followed by gait retraining, and knee brace only. Although no significant difference was observed among the eight interventions, variable-stiffness shoes and neuromuscular exercise exhibited an increase in the first peak KAM compared with the control condition group. And based on the collective probability of being the overall best therapy for reducing KAAI, gait retraining was followed by LWI only, and lower limb exercise. CONCLUSION: The results of our study support the use of LWI plus knee brace for reducing the first peak KAM. Gait retraining did not rank highest but it influenced both KAM and KAAI and therefore it was the most recommended therapy for reducing the biomechanical risk factors.
Asunto(s)
Osteoartritis de la Rodilla , Teorema de Bayes , Fenómenos Biomecánicos , Marcha , Humanos , Articulación de la Rodilla , Metaanálisis en Red , Equipo Ortopédico , Osteoartritis de la Rodilla/rehabilitación , Modalidades de Fisioterapia , Factores de RiesgoRESUMEN
The Reamer-Irrigator-Aspirator (RIA-2) system has been established as a safe and reliable device to harvest large amounts of autograft. Nevertheless, hardware complications may occur. Breakage of the reamer head from the drive shaft with intramedullary retention of small metal debris has never been dealt with. The authors provide a technical trick as a bailout in this difficult situation.