Rapid detection of microalgae cells based on upconversion nanoprobes.

The quantification of microalgae cells is crucial for the treatment of ships' ballast water. However, achieving rapid detection of microalgae cells remains a substantial challenge. Here, we develop a new method for rapid and effective detection of microalgae concentration by utilizing upconversion nanoprobes (UCNPs) of NaYF4:Er3+,Tm3+. Three ligands, carboxylated methoxypolyethylene glycols with 5000 and 2000 molecular weights (mPEG-COOH-5, mPEG-COOH-2) and D-gluconic acid sodium salt (DGAS), were used to convert hydrophobic UCNPs into a hydrophilic state through modification. The results show that the mPEG-COOH-5 modified UCNPs present the highest stability in an aqueous solution. Fourier Transform Infrared Spectroscopy (FTIR) measurements reveal the presence of a significant number of -COOH functional groups on UCNPs after the mPEG-COOH-5 modification. These -COOH groups enhance the hydrophilicity and biocompatibility of UCNPs. The soluble UCNPs were directly mixed with microalgae, and the upconversion luminescence (UCL) spectra of the UCNPs were recorded immediately after thorough shaking. This greatly reduces the measurement time and could realize rapid onboard detection. In this sensing procedure, the UCNPs with red UCL functioned as energy donors, while microalgae with red absorption served as an energy acceptor. The UCL gradually diminishes with an increase in microalgae concentration based on the inner filter effect, thus establishing a relationship between UCL and microalgae concentration. The accuracy of the detection is further validated through the traditional microscope counting method. These findings pave the way for a novel rapid strategy to assess microalgae concentration using UCNPs.

Te4+ and Er3+ doped ZrO2 nanoparticles with enhanced photocatalytic, antibacterial activity and dielectric properties: A next generation of multifunctional material.

Amid rising water contamination from industrial sources, tackling toxic dyes and pathogens is critical. Photocatalysis offers a cost-effective and eco-friendly solution to this pressing challenges. Herein, we synthesized Te4+ and Er3+ doped ZrO2 photocatalysts through hydrothermal method and investigated their efficacy in degrading Congo red (CR) and pathogens under visible light. XRD and Raman Spectroscopy confirm monoclinic and tetragonal mixed-phases without any impurities. Doping-induced defects, reduced crystalline diameter, high surface area, modified bandgap (2.95 eV), photoluminescence quenching, coupled with interfacial polarization, contribute to EZO's excellent dielectric response (1.149 × 106), for achieving remarkable photocatalytic activity, verified by photoelectrochemical measurements, LC-MS and phytotoxicity analysis. Under optimal conditions, EZO achieves 99% CR degradation within 100 min (TOC 79.9%), surpassing ZO (77%) and TZO (84%). Catalyst dosages, dye concentrations, and solution pH effect on EZO's photocatalytic performance are systematically assessed. Scavenging experiment emphasized the pivotal role of · OH in CR degradation with 96.4% efficiency after 4 cycles, affirming its remarkable stability. Moreover, EZO demonstrates ROS-mediated antibacterial activity against E. faecalis and E. coli bacteria under visible light, achieving >97% and >94% inhibition rate with an inhibition zone > 3 mm. Hence, the nanoparticle's dual action offers a practical solution for treating contaminated wastewater, ensuring safe irrigation.

Luminescence properties of CdF2 single crystals co-doped with Er3+ and Y3+ ions.

The luminescence properties of erbium and yttrium co-doped cadmium difluoride with three different concentrations of yttrium were investigated. First, we synthesized single crystal samples with good optical quality using the Bridgman technique. From the optical absorption spectra, recorded at room temperature, both in the ultraviolet-visible and infrared spectral ranges, Judd-Ofelt analysis was performed based on yttrium concentrations to predict the radiative properties of Er3+ luminescent ions. For the 10% optimum concentration of yttrium, a detailed photoluminescence investigation was carried out. We mainly explored green, red, and near-infrared fluorescence under different excitation wavelengths and presented their highlight spectroscopic characteristics. The desired transitions had relatively high emission cross-sections both under visible and near-infrared excitation. Optical gain followed a similar trend. Furthermore, the dynamic fluorescence study showed a significant increase in the measured lifetime under an 800 nm infrared excitation. The upconversion process under an 800 nm excitation produced quantum efficiency greater than 100% due to the contribution of more than one energy transfer mechanism.

Erbium(III) complexes with fluoroquinolones: Structure and biological properties.

Four erbium(III) complexes with the fluoroquinolones enrofloxacin, levofloxacin, flumequine and sparfloxacin as ligands were synthesized and characterized by a wide range of physicochemical and spectroscopic techniques as well as single-crystal X-ray crystallography. The compounds were evaluated for their activity against the bacterial strains Staphylococcus aureus, Bacillus subtilis, Escherichia coli and Xanthomonas campestris, which was higher than that of the corresponding free quinolones. The interaction mode of the complexes with calf-thymus DNA is via intercalation, as suggested by diverse studies such as UV-vis spectroscopy, DNA-viscosity measurements and competitive studies with ethidium bromide. Fluorescence emission spectroscopy revealed the high affinity of the complexes for bovine and human serum albumin and the determined binding constants suggested a tight and reversible binding of the compounds with both albumins.

Synergistically Enhanced Electrochemical Sensing of Food Adulterant in Milk Sample at Erbium Vanadate/Graphitic Carbon Nitride Composite.

Dimetridazole (DMZ), a nitroimidazole derivative, is a notable antibiotic that has garnered growing interest in the medical community owing to its noteworthy pharmacological and toxicological properties. Increasing interest is being directed toward developing high-performance sensors for continuous monitoring of DMZ in food samples. This research investigated an electrochemical sensor-based nano-sized ErVO4 attached to a sheet-like g-CN-coated glassy carbon electrode to determine dimetridazole (DMZ). The chemical structure and morphological characterization of synthesized ErVO4@g-CN were analyzed with XRD, FTIR, TEM, and EDS. Irregular shapes of ErVO4 nanoparticles are approximately 15 nm. Cyclic voltammetry (CV) and differential pulse voltammetry (DPV) were followed to examine the electrochemical performance in pH 7 phosphate buffer solution for higher performance. This electrochemical sensor showed a low detection limit (LOD) of 1 nM over a wide linear range of 0.5 to 863.5 µM. Also, selectivity, stability, repeatability, and reproducibility studies were investigated. Furthermore, this electrochemical sensor was applied to real-time milk sample analysis for the detection of analytes.

Erbium: YAG laser treatment efficacy and association with histologic features for giant congenital melanocytic nevi management.

BACKGROUND: Limited research exists on laser treatment of giant congenital melanocytic nevus (GCMN). OBJECTIVE: We sought to elucidate the efficacy of the Erbium: YAG laser on GCMN and the histologic factors associated with a positive clinical response. METHODS AND MATERIALS: Between 2019 and 2022, we enrolled 30 medium-to-giant CMN patients who underwent Er: YAG laser treatment. All patients received biopsies before and after laser treatments. Clinical efficacy outcomes were evaluated by the investigator's global assessment (IGA), 5-point scale of depigmentation, and Vancouver Scar Scale (VSS) scores at least 6 months after treatment. RESULTS: Of the 30 cases, 18 (60.0%) showed improvement (IGA score ≥3). Eight (26.7%) patients showed repigmentation. Eight (26.7%) patients developed hypertrophic scars. The average IGA, depigmentation, and VSS scores were 2.93, 3.57, and 3.20. The IGA score was higher (3.24 ± 1.18 vs. 2.22 ± 0.97, p = 0.031) and a lower repigmentation rate (14.3% vs. 55.6%, p = 0.032) was observed in the cases with Grenz zone. The IGA score was higher (3.33 ± 1.24 vs. 2.13 ± 0.89, p = 0.023) and the repigmentation rate was lower (11.1% vs. 50.0%, p = 0.034) also in the cases with the melanocytes nests with aggregation of melanin. Lesions with superficial ablation resulted in less hypertrophic scar formation than those with deep ablation (5.9% vs. 53.8%, p < 0.05). CONCLUSION: The Er: YAG laser demonstrated effective clinical results for GCMNs. The grenz zone and the melanocytes nests with aggregation of melanin are promising predictors of laser efficacy.

Full-face and neck resurfacing with a novel ablative fractional 2910 nm erbium-doped fluoride glass fiber laser for advanced photoaging.

OBJECTIVES: Ablative fractional lasers have long been considered the gold standard for facial resurfacing for advanced photoaging. These lasers offer an improved safety profile compared to traditional ablative lasers but typically require more treatment sessions given their fractional approach. In this study, we evaluate a new novel 2910 nm erbium-doped fluoride glass fiber laser (2910 nm fiber laser) (UltraClear; Acclaro Medical) for full-face and neck resurfacing for the treatment of advanced photoaging. METHODS: Twenty-two healthy subjects aged 44-80 years presenting for advanced facial photoaging and rhytides were enrolled in the study. All subjects received three full-face and neck, multipass treatments utilizing the 2910 nm fiber laser spaced 6-8 weeks apart. Subjects were asked to rate the average level of pain during the treatment. At 90 days following subjects' third treatment subjects evaluated their improvement using a Global Aesthetic Improvement Scale (GAIS) and rated their satisfaction with the treatment. Evaluation of pretreatment and posttreatment photos was completed by two blinded physician reviewers. Reviewers were asked to identify the pretreatment and posttreatment photographs and to rate the degree of improvement utilizing a GAIS. RESULTS: Fifteen participants completed the study; six were exited from the study (withdrew or lost to follow-up). The average subject GAIS score for overall appearance was 3.8. The average subject satisfaction level at follow-up was 4.8. The average subject pain score was 4.9. One blinded physician reviewer correctly identified 100% of subjects' posttreatment photographs, while the second blinded reviewer correctly identified 93%. Blinded evaluation of digital photographs revealed an average GAIS score of 3.2. Posttreatment skin responses included pin-point hemorrhage, erythema, edema, and soft tissue crusting lasting 5-7 days. There were no instances of infection, scarring or hypopigmentation. There were two instances of temporary hyperpigmentation. CONCLUSIONS: Treatment with the novel 2910 nm fiber laser is safe and effective in treating advanced photoaging and rhytides. Three treatments produced moderate to marked improvement with high patient satisfaction and treatment was associated with less discomfort and downtime compared to conventional fractional ablative lasers.

Study on the effect of crystal changes on acid resistance of erbium laser etched enamel surface.

To investigate the mechanism underlying high acid resistance of enamel after erbium laser etching. Forty-five premolars were collected and assigned to three groups. A 4×4×1 mm enamel sample was prepared, the left side was the control side, the right side was the treated side, which was treated with different surface treatments, including 35% phosphoric acid etching, Er:YAG laser etching, and Er,Cr:YSGG laser etching. The hydroxyapatite crystal size on the enamel surface of the samples was observed. The contents of Ca, P, O, F, Cl, C, Mg were detected. The crystallinity of the hydroxyapatite crystal was analyzed. After erbium laser etching, the enamel surface had high hydroxyapatite crystal size, beneficial content of chemical elements and crystallinity. The morphological and composition changes of crystals in the enamel surface after erbium laser etching may be one of the crucial mechanisms underlying the enhancement of acid resistance of enamel after erbium laser etching.

Efficacy and safety of lasers versus topical medications for acanthosis nigricans and pseudo-acanthosis nigricans treatment: a systematic review.

Acanthosis nigricans (AN) is a cutaneous disorder identified by well-defined pigmented plaques mostly detected on skin folds. Timely diagnosis and treatment of AN is essential as it could be an early manifestation of an underlying condition. The treatment of choice for AN has not been determined yet. Our study aimed to compare the efficacy and safety of various lasers with topical medications, including cream and peel. PubMed, Scopus, and Web of Science databases, as well as the Google Scholar search engine, were thoroughly searched until May 1st, 2023. Study selection was restricted to clinical trials published in English language comparing lasers with topical treatments. This study followed the PRISMA guidelines for systematic reviews and meta-analyses. Out of 1748 studies, Six clinical trials met our inclusion criteria, with 133 patients. We examined laser therapies, including fractional CO2 laser, 1550-nm erbium fiber laser, and long-pulsed alexandrite laser, while the topical treatments comprised glycolic acid (GA) peel, retinoic acid peel, trichloroacetic acid (TCA) peel, and tretinoin cream. In two studies, GA peel demonstrated favorable results compared to fractional CO2 laser. Besides, fractional CO2 laser exhibited efficacy, surpassing TCA peel in AN management. Additionally, a fractional 1550-nm erbium fiber laser displayed superiority over tretinoin cream in reducing average roughness. Similarly, a long-pulsed alexandrite laser demonstrated its effectiveness in axillary AN treatment compared to the combination of tretinoin and ammonium lactate. Overall, the findings revealed that laser therapy was associated with superior results. Moreover, topical treatments are safe and efficacious in AN management.

Assessment of the Effect of Different Irrigation Protocols on the Penetration of Irrigation Solution into Simulated Lateral Canals (In Vitro Study).

OBJECTIVE: To compare the effectiveness of lateral canal irrigation penetration by conventional needle, passive ultrasonic, sonic endo activator, and Erbium laser (2780nm). METHODS: A total of 40 palatal roots of human maxillary first molars were collected and instrumented at a working length of 12 mm by an X1-X4 rotary Protaper Next system (Dentsply, Maillefer, Ballaigues, Switzerland) using the crown-down technique. Artificial lateral canals were made at 2, 4, and 6 mm from the apex on mesial and distal sides using an ISO rotary reamer (Dentsply, Maillefer, Ballaigues, Switzerland; #10 for mesial, #08 for distal). The samples were then cleared using methyl salicylate. A solution of black ink and normal saline was used as an irrigant for the root canal. The percentages of the penetration of the ink into the lateral canals were measured using a stereomicroscope (Q-Scope, Arnhem, The Netherlands) with the aid of program Image J. The Tukey test is used to assess the significant difference between intragroup and intergroup comparisons of different thirds, and the T-test is used to assess the significant difference between every two groups and for the mesial and distal sides of each group. The level of significance was set at 0.05. RESULTS: Results showed that none of the activation techniques used resulted in complete lateral canal penetrations; however, on both sides at all thirds, the Erbium laser (2780 nm) achieved the highest results with a highly significant statistical difference (p=0.05) with all other groups, and the least penetration was in the conventional needle group. CONCLUSION: The size of the lateral canal is a restricting factor for all activation methods; the best results can be achieved by laser. Conventional needles cannot be used alone to disinfect complex canal anatomy; however, passive ultrasonic and sonic endo activator activations can produce comparable results.

Er:YAG laser debonding of zirconia and lithium disilicate restorations.

STATEMENT OF PROBLEM: Yttria-stabilized tetragonal zirconia polycrystal (Y-TZP) restorations of different formulations are being used increasingly in monolithic form for a range of clinical applications. Using rotary instruments to remove such restorations for any purpose is challenging, but they can be removed conservatively with erbium lasers. However, studies on how a laser penetrates different zirconias to break the cement bond between the tooth surface and the zirconia are lacking. PURPOSE: The purpose of this in vitro study was to evaluate and compare the time required for an erbium-doped yttrium-aluminum-garnet (Er:YAG) laser to remove different types of zirconia and lithium disilicate crowns. MATERIAL AND METHODS: Forty extracted premolar teeth were prepared, scanned, designed, and milled to fabricate 40 computer-aided design and computer-aided manufacturing (CAD-CAM) crowns, which were assigned to 4 groups (n=10): 3 mol% Y-TZP, 4 mol% Y-TZP, 5 mol% Y-TZP, and lithium disilicate as a control. All crowns were bonded to the teeth with a self-adhesive resin cement (Panavia SA Cement Universal). Each specimen was irradiated with an Er:YAG laser with the following parameters: 300 mJ, 15 Hz, 5.0 W, and a 50-microsecond pulse duration (supershort pulse mode). The irradiation time required for crowns to be retrieved successfully was recorded for each specimen. Data were statistically analyzed using analysis of variance and the Tukey honestly significant difference post hoc test (α=.05). The intaglio surfaces of the restorations were analyzed using scanning electron microscopy (SEM). RESULTS: The mean ±standard deviation times in minutes needed for crown debonding were 12.46 ±4.17 for the 3 mol% Y-TZP group, 10.30 ±3.33 for the 4 mol% Y-TZP group, 4.03 ±1.62 for the 5 mol% Y-TZP group, and 2.08 ±0.92 for the lithium disilicate group. A statistically significant difference (P<.05) in the debonding time was found for all investigated groups, expect between the 3 mol% and 4 mol% Y-TZP groups and between the 5 mol% Y-TZP and lithium disilicate groups. SEM analysis of the ceramic surfaces showed no visual damage associated with Er:YAG laser irradiation. CONCLUSIONS: Zirconia crown retrieval time with the Er:YAG laser was influenced by the yttria content of the zirconia, with decreasing retrieval time with increasing yttria content. Er:YAG laser debonding of zirconia crowns is a noninvasive, efficient, and rapid approach to the removal of crowns and could be applied in clinical practice.

Vaginal erbium laser treatment for stress urinary incontinence: A multicenter randomized sham-controlled clinical trial.

OBJECTIVE: To evaluate the efficacy and safety of non-ablative vaginal Er:YAG laser device in stress urinary incontinence (SUI) treatment. METHODS: We conducted a multicenter blinded randomized sham-controlled trial in which women with urodynamic SUI were randomization to active arm using Er:YAG laser therapy, and sham arm using sham handpiece. Patients received two treatments 1 month apart. The primary outcomes measure was 1 h pad weight test measured at 6 months. Secondary outcomes were durability of treatment success at 12 months, and questionnaires for assessment of SUI severity (ICIQ-UI SF), sexual function (PISQ-12) and HRQoL (KHQ), and incidence and severity of device related adverse events and pain (VAS). RESULTS: A total of 110 participants with SUI were recruited; 73 in the active arm and 37 in the sham arm. Two participants were excluded; one was assigned the wrong treatment and one withdrew their consent. Treatment success was observed in 36% of the sham arm and 59% of the active arm; in the latter, odds of achieving treatment success were more than three-fold higher (OR 3.63, 95% CI: 1.3-11.2, P = 0.02). HRQoL by KHQ showed significant improvement in the active versus the sham arm (OR 0.36, 95% CI: 0.15-0.87, P = 0.003). Similarly, subjective patient assessment of general and sexual function improvement with PISQ-12 and PGI-I showed superior effect over sham (OR 2.8, 95% CI: 1.2-7.0, P = 0.02 and OR 0.13, 95% CI: 0.05-0.36, P < 0.001, respectively). CONCLUSION: Non-ablative vaginal Er:YAG laser therapy significantly improves SUI symptoms versus sham treatment. Er:YAG laser therapy should be considered as a non-surgical treatment option for SUI patients.

Evaluation of the effectiveness and practicality of erbium lasers for ceramic restoration removal: A retrospective clinical analysis.

BACKGROUND: The purpose of this study was to assess the effectiveness and practicality of erbium lasers in the removal of ceramic restorations and appliances from natural teeth and dental implant abutments in clinical practice. METHODS: A retrospective analysis was conducted, involving 29 clinical cases with a total of 52 abutments requiring the removal of various ceramic restorations. The analysis evaluated the clinical procedures performed, including the type and material of the prosthetic, the type of cement used, laser setting parameters, retrieval time, and retrieval success. RESULTS: Out of the 52 abutments, 50 were successfully retrieved without causing any damage (>95%) using either an Er,Cr:YSGG laser (N = 6) or an Er:YAG laser (N = 46). In one case, a crown was partially sectioned to prevent any negative impact of laser irradiation on the adhesive strength between the post and tooth, and in another case, a fracture occurred during debonding. The restorations consisted of 13 lithium disilicate and 39 zirconia units, including six veneers, 38 single crowns, and three fixed partial dentures (FPDs). The retrieval time varied depending on the restoration type, material thickness, cement type, retention form/fitting of the abutment and restoration, ranging from 2.25 ±0.61 minutes for veneers, 6.89 ±8.07 minutes for crowns, to 25 ±10 minutes per abutment for FPDs. Removal of a zirconia crown required more time, 7.12±8.91 minutes, compared to a lithium disilicate crown, 5.86 ±2.41 minutes. The debonding time was influenced by the laser settings as well as materials and types of prosthesis. CONCLUSIONS: Erbium lasers present a safe and effective alternative to invasive methods for removing ceramic restorations, without causing harm to the abutment or prosthesis. Laser-assisted debonding allows for recementation of the restorations during the same appointment, making it a conservative and viable option for ceramic crown retrieval in clinical settings.

Use of fractionated laser therapy for the treatment of androgenetic alopecia: a systematic review and meta-analysis.

Procedural management, including fractionated laser therapy, has been increasingly investigated for the management of androgenetic alopecia (AGA). However, no comprehensive resources exist detailing the efficacy of fractionated laser therapies used for the treatment of AGA. A systematic review investigating fractionated laser use for AGA was performed, separated into each distinct fractionated laser modality. A meta-analysis was performed to examine improvement in hair counts and hair shaft diameter. Fourteen studies were included for systematic review, which identified the use of erbium-glass, thulium, erbium-ytrrium:aluminum garnet (YAG), and carbon dioxide (CO2) fractionated laser for the treatment of AGA. In the meta-analysis, fractionated laser combination therapy showed significant improvement in hair shaft diameter (2.51, 95% CI 2.37-2.65, I2 = 90.54). Fractionated laser monotherapy alone significantly improved hair shaft diameter (2.28 95% CI 2.03-2.52, I2 = 91.20%). This effect was durable on subgroup analysis for both erbium-glass (2.36 95% CI 2.01-2.71, I2 = 92.05%) and thulium (1.61 95% CI 1.08-2.15, I2 = < 0.00%). There was no improvement in hair shaft count for any laser modality. Erbium-glass laser is an effective modality as either monotherapy or combination with topical/injectable therapies to improve hair shaft diameter in AGA.

Evaluation of the microleakage of class V composite restoration after cavity treatment with Erbium, CO2 lasers, Papain, and Bromelain enzymes.

OBJECTVES: Different surface preparation and treatment methods may have dissimilar effects on the microleakage of composite resin. This study was conducted to determine the deproteinizing effect of 10% bromelain enzyme, 10% papain enzyme, CO2 , and erbium-YAG laser in regard to decrease in the microleakage of composite restorations. MATERIALS AND METHODS: Thirty teeth were selected and 60 class V cavities were prepared on the lingual and buccal sides. They were divided into six groups (n = 10): Group 1, phosphoric acid gel; Group 2, bromelain enzyme 10%; Group 3, papain enzyme 10%; Group 4, mixed papain and bromelain enzymes 10%; Group 5, CO2 laser; and Group 6, erbium-YAG laser. They were stored in basic fuchsine and dye penetration was evaluated. Kruskal-Wallis and Mann-Whitney tests were used for statistical analysis, p < 0.05 RESULTS: In both occlusal and gingival margins, comparison of microleakage between groups 1, 2, 3, 4, and 5 showed no significant differences (p = 1) and group 6 had a significant difference with other groups (p ˂ 0.001). CONCLUSIONS: Microleakage of composite resin in the dentin surface was not affected significantly using either bromelain or papain 10% enzymes or erbium laser. However, CO2 laser had a negative effect on the enamel and dentin margins and increased the microleakage. Erbium laser showed a better effect than enzymes on microleakage.

Developing a Hetero-Trinuclear Erbium(III)-Copper(II) Complex Based on Apoferritin: Targeted Photoacoustic Imaging and Multimodality Therapy of Tumor.

For the integration of targeted diagnosis and treatment of tumor, we innovatively designed and synthesized a single-molecule hetero-multinuclear Er(III)-Cu(II) complex (ErCu2) and then constructed an ErCu2@apoferritin (AFt) nanoparticle (NP) delivery system. ErCu2 and ErCu2@AFt NPs not only provided an evident photoacoustic imaging (PAI) signal of the tumor but also effectively inhibited tumor growth by integrating photothermal therapy, chemotherapy, and immunotherapy. ErCu2@AFt NPs improved the targeting ability and decreased the systemic toxicity of ErCu2 in vivo. Furthermore, we confirmed that ErCu2 and ErCu2@AFt NPs inhibited tumor growth by inducing apoptosis and autophagy of tumor cells and activating the immune system. The study not only provides a novel strategy to develop therapeutic metal agents but also reveals their potential for targeted accurate diagnosis and multimodality therapy of cancer.

[Prospective randomized controlled trial on 2 940 nm fractional erbium laser combined with fractional micro-plasma radiofrequency in the treatment of facial atrophic acne scars].

Objective: To compare the efficacy and safety of 2 940 nm fractional erbium laser combined with fractional micro-plasma radiofrequency (FMR) therapy and 2 940 nm fractional erbium laser in the treatment of atrophic acne scars. Methods: A prospective randomized controlled research was conducted. A total of 100 atrophic acne scar patients (38 males and 62 females, aged 18-37 years) who were treated in the Scar Laser Clinic of the Department of Plastic and Reconstructive Surgery of Shanghai Ninth People's Hospital of Shanghai Jiao Tong University School of Medicine from March 2018 to March 2021 and conformed to the inclusion criteria were recruited. The patients were randomly divided into erbium laser+FMR group and erbium laser alone group, with 50 cases in each group. The facial acne scars of patients in erbium laser alone group were treated with 2 940 nm fractional erbium laser, while the facial acne scars of patients in erbium laser+FMR group were treated with erbium laser as above, besides, the scars of U and M types were treated with FMR, once every 3 months for a total of 3 times. Before the first treatment and 3 months after each treatment, the Echelle D'Assessment Clinique des Cicatrices D'Acne (ECCA) was used to score the scar. The occurrence of adverse reaction during the treatment process was observed and recorded, and the incidence was calculated. Three months after the last treatment, the 5-level classification method was used to evaluate the satisfaction of patients with the treatment effect, and the satisfaction rate was calculated. Data were statistically analyzed with independent sample t test and chi-square test. Results: A total of 89 patients completed the study, including 46 patients in erbium laser+FMR group (19 males and 27 females, aged (26±5) years) and 43 patients in erbium laser alone group (15 males and 28 females, aged (27±6) years). The ECCA scores before the first treatment and 3 months after the first treatment of patients were similar between the two groups (P>0.05). The ECCA scores of patients in erbium laser+FMR group at 3 months after the second and third treatment were 72±23 and 61±18, respectively, which were significantly lower than 85±26 and 76±25 in erbium laser alone group (with t values of -2.45 and -3.26, respectively, P<0.05). During the treatment process, the incidence of adverse reaction of patients in erbium laser+FMR group and erbium laser alone group were 23.91% (11/46) and 16.28% (7/43), respectively, and there was no statistically significant difference between the two groups (P>0.05). The satisfaction rate of patients in erbium laser+FMR group was 78.26% (36/46) at 3 months after the last treatment, which was significantly higher than 53.49% (23/43) in erbium laser alone group (χ2=6.10, P<0.05). Conclusions: The 2 940 nm fractional erbium laser combined with FMR is superior to 2 940 nm fractional erbium laser alone in the treatment of facial atrophic acne scars, achieving significantly higher efficacy without significantly increasing the incidence of adverse reaction, and patients are more satisfied with the efficacy. It can be used as a recommended therapy in clinical practice.

Comparison of micromorphological changes in enamel using SEM analysis after conventional and erbium, chromium:yttrium, scandium, gallium, and garnet hard-tissue laser fissurotomy: An in vitro study.

Background: Well articulated by John Knowles - "Everything has to evolve or else it perishes." With the paradigm shift of emphasis toward the prevention of dental caries, it has been proven that laser irradiation protects against both caries initiation and caries progression. Aim: The aim of the study was to evaluate and compare the micromorphology of caries-free extracted premolars using a Scanning electron microscope (SEM) after fissurotomy by conventional fissurotomy bur and erbium, chromium: yttrium, scandium, gallium, and garnet (ER, CR: YSGG) hard-tissue laser. Methodology: Sixty caries-free premolars extracted atraumatically for orthodontic treatment were included in the study. The samples were divided into two groups randomly (Group 1: fissurotomy by bur, n = 30, and Group 2: fissurotomy by hard-tissue laser, n = 30). Each sample was further divided into halves from the occlusal surface wherein one-half of the occlusal surface received fissurotomy procedure and the other half was control. Samples were analyzed by scanning electron microscopy (SEM) for micromorphological changes. Results: Profile image of control samples revealed the disorganization of enamel surface at the junction of fissures forming a heterogeneous tissue and agglomeration of enamel with deep pit and fissure. On the contrary, the image of experimented samples (with laser fissurotomy) showed smooth enamel surface and homogeneous enamel subsurface with wider pit and fissure owing to self-cleansing ability. Conclusion: On the grounds of the present study results, it could be concluded that the intervention of ER, CR: YSGG hard-tissue laser possesses self-cleansable pit and fissures for caries prevention and has the potential to irradicate the smear layer entirely for superior attachment of remineralizing agents.