Optimization of Pressurized Liquid Extraction (PLE) Parameters for Extraction of Bioactive Compounds from Moringa oleifera Leaves and Bioactivity Assessment.

Moringa oleifera leaves are rich sources of bioactive compounds with potential health benefits, including antioxidants and anti-inflammatory agents. Pressurized liquid extraction (PLE) stands out as a promising technique for effectively extracting valuable compounds from natural sources. In this study, we aimed to optimize PLE parameters, such as temperature, extraction duration, and pressure, to maximize bioactive compound (polyphenols, flavonoids, and ascorbic acid) yield from M. oleifera leaves and evaluate their antioxidant and anti-inflammatory activities. According to the outcomes of this research, the maximum achieved total polyphenol content was 24.10 mg gallic acid equivalents (GAE)/g of dry weight (dw), and the total flavonoid content was increased up to 19.89 mg rutin equivalents (RtE)/g dw. Moreover, after HPLC-DAD analysis, neochlorogenic and chlorogenic acids, catechin and epicatechin, rutin, and narirutin were identified and quantified. As far as the optimum ascorbic acid content is concerned, it was found to be 4.77 mg/g dw. The antioxidant activity was evaluated by three different methods: ferric reducing antioxidant power (FRAP), the DPPH method, and the anti-hydrogen peroxide activity (AHPA) method, resulting in 124.29 µmol ascorbic acid equivalent (AAE)/g dw, 131.28 µmol AAE/g dw, and 229.38 µmol AAE/g dw values, respectively. Lastly, the albumin denaturation inhibition was found to be 37.54%. These findings underscore the potential of PLE as an efficient extraction method for preparing extracts from M. oleifera leaves with the maximum content of bioactive compounds.

A new sustainable filtration membrane extraction method based on nanoconfined liquid phase extraction: Determination of organochlorinated pesticides and pyrethroids in tea samples.

BACKGROUND: Pesticides are used in agricultural production for prevent and control crop diseases and pests, but it is easy to cause excessive pesticides residues in agricultural products, polluting the environment and endangering human health. Due to their unmatched and sustainable capabilities, nanoextraction procedures are becoming every day more important in Analytical Chemistry. In particular, nanoconfined liquid phase extraction has shown extraction capabilities toward polar, medium polar, and/or nonpolar substances, which can be easily modulated depending on the nanoconfined solvent used. Furthermore, this "green" technique showed excellent characteristics in terms of recoveries, extraction time (≤1 min), reliability, and versatility. (97) RESULTS: In this work, the advantages of this technique have been coupled with those of filtration membrane extraction, making use of carbon nanofibers (CnFs) growth on carbon microspheres (CµS). This substrate has been deposited on a filter, which combined with gas chromatographic mass spectrometry (GC-MS) analysis successfully employed for the nanoextraction of 30 pesticides (18 organochlorine and 12 pyrethroids) in tea samples. Under the optimized extraction conditions, the linear range with standard solutions was from 1 to 1000 ng mL-1 (R2 ≥ 0.99), the limit of detections in tea samples were in the range 0.56-17.98 µg kg-1. The accuracy of the developed method was evaluated by measuring the extraction recovery of the spiked tea samples, and recoveries between 74.41 % and 115.46 %. (119) SIGNIFICANCE: Considering the versatility of nanoconfined liquid phase extraction and the functionality of the filtration membrane extraction procedure, this new extraction method can be considered a powerful candidate for automatized high-throughput analyses of real samples. (34).

Simultaneous determination of six catechins and caffeine in tea and wine using salting-out assisted liquid-liquid extraction and high-performance liquid chromatography with ultraviolet detection.

Catechins, renowned for their antioxidant properties and health benefits, are commonly present in beverages, particularly tea and wine. An efficient and cost-effective salting-out assisted liquid-liquid extraction (SALLE) method has been developed and validated for the simultaneous determination of six catechins and caffeine in tea and wine samples using high-performance liquid chromatography-ultraviolet (HPLC-UV). This method demonstrates outstanding performance: linearity (1-120 µg/mL, r2 > 0.999), accuracy (96.5%-103.4% recovery), and precision (≤14.7% relative standard deviation), meeting validation requirements set by the US Food and Drug Administration. The reduced sample size (0.1 g) minimizes matrix interferences and costs without compromising sensitivity. All analytes were detected in Camellia sinensis teas, with green tea displaying the highest total catechin content (47.5-100.1 mg/mL), followed by white and black teas. Analysis of wine samples reveals the presence of catechin in all red and white wines, and epigallocatechin gallate in all red wine samples, highlighting the impact of winemaking processes on catechin content. The SALLE-HPLC-UV approach represents a green alternative by eliminating organic waste, surpassing conventional dilution methods in specificity and sensitivity for catechin determination. AGREEprep assessment emphasizes the strengths of the SALLE procedure, including material reusability, throughput efficiency, minimal sample requirements, low energy consumption, and the absence of organic waste generation.

Isolation of nucleic acids using liquid-liquid phase separation of pH-sensitive elastin-like polypeptides.

Extraction of nucleic acids (NAs) is critical for many methods in molecular biology and bioanalytical chemistry. NA extraction has been extensively studied and optimized for a wide range of applications and its importance to society has significantly increased. The COVID-19 pandemic highlighted the importance of early and efficient NA testing, for which NA extraction is a critical analytical step prior to the detection by methods like polymerase chain reaction. This study explores simple, new approaches to extraction using engineered smart nanomaterials, namely NA-binding, intrinsically disordered proteins (IDPs), that undergo triggered liquid-liquid phase separation (LLPS). Two types of NA-binding IDPs are studied, both based on genetically engineered elastin-like polypeptides (ELPs), model IDPs that exhibit a lower critical solution temperature in water and can be designed to exhibit LLPS at desired temperatures in a variety of biological solutions. We show that ELP fusion proteins with natural NA-binding domains can be used to extract DNA and RNA from physiologically relevant solutions. We further show that LLPS of pH responsive ELPs that incorporate histidine in their sequences can be used for both binding, extraction and release of NAs from biological solutions, and can be used to detect SARS-CoV-2 RNA in samples from COVID-positive patients.

Biomonitoring urinary pesticide metabolites in preschool children by supported liquid extraction and ultra-high performance liquid chromatography-tandem mass spectrometry and their association with oxidative stress.

Investigating pesticide exposure and oxidative stress in preschool children is essential for elucidating the determinants of environmental health in early life, with human biomonitoring of urinary pesticide metabolites serving as a critical strategy for achieving this objective. This study demonstrated biomonitoring of 2 phenoxyacetic acid herbicides, 2 organophosphorus pesticide metabolites, and 4 pyrethroid pesticide metabolites in 159 preschool children and evaluated their association with oxidative stress biomarker 8-hydroxydeoxyguanosine. An enzymatic deconjugation process was used to release urinary pesticide metabolites, which were then extracted and enriched by supported liquid extraction, and quantified by ultra-high performance liquid chromatography-tandem mass spectrometry with internal standard calibration. Dichloromethane: methyl tert­butyl ether (1:1, v/v) was optimized as the solvent for supported liquid extraction, and we validated the method for linear range, recovery, matrix effect and method detection limit. Method detection limit of the pesticide metabolites ranged from 0.01 µg/L to 0.04 µg/L, with satisfactory recoveries ranging from 70.5 % to 95.5 %. 2,4,5-Trichlorophenoxyacetic acid was not detected, whereas the other seven pesticide metabolites were detected with frequencies ranging from 10.1 % to 100 %. The concentration of urinary pesticide metabolites did not significantly differ between boys and girls, with the median concentrations being 9.39 µg/L for boys and 4.90 µg/L for girls, respectively. Spearman correlation analysis indicated that significant positive correlations among urinary metabolites. Bayesian kernel machine regression revealed a significant positive association between urinary pesticide metabolites and 8-hydroxydeoxyguanosine. Para-nitrophenol was the pesticide metabolite that contributed significantly to the elevated level of oxidative stress.

Sensitive and effective method with 96-well plate for determination of levamlodipine in human plasma using LC-MS/MS.

we developed an effective protein precipitation method for determination of levamlodipine in human plasma using LC-MS/MS. Sample extraction was carried out by using liquid-liquid extraction in 96-well plate format. (S)-Amlodipine-d4 was used as internal standard (IS). The chromatographic separation was achieved using Philomen Chiral MX (2) column (3 µm, 2.1 × 100 mm). Mobile phase A was comprised of Acetonitrile (ACN), Mono ethanol amine (MEA) and Iso-Propyl alcohol (IPA) (1000:1:10, v/v/v), Mobile phase B was IPA-ACN (2:1, v/v). The flow rate was 0.4 mL/min. The total run time of each sample was 4.0 min with gradient elution. LC-MS/MS spectra were generated in positive ion mode, and multiple reaction monitoring (MRM) was used to detect the following transitions: m/z 409.20 â†’ 238.15 for levamlodipine and 415.25 â†’ 240.20 for (S)-Amlodipine-d4 (the IS). The method was linear from 50 to 10000 pg/mL（R2＝0.9988489）,and the lower limit of quantification (LLOQ) was 50 pg/mL. This method was applied to a bioequivalence study of levamlodipine.

Phase separation methods for protein purification: A meta-analysis of purification performance and cost-effectiveness.

Protein purifications based on phase separations (e.g., precipitation and liquid-liquid extraction) have seen little adoption in commercial protein drug production. To identify barriers, we analyzed the purification performance and economics of 290 phase separation purifications from 168 publications. First, we found that studies using Design of Experiments for optimization achieved significantly greater mean yield and host cell protein log10 removal values than those optimizing one factor at a time (11.5% and 53% increases, respectively). Second, by modeling each reported purification at scales from 10 to 10,000 kg product/year and comparing its cost-effectiveness versus chromatography, we found that cost-effectiveness depends strongly on scale: the fraction of phase separations predicted to be cost-effective at the 10, 100, and 1000 kg/year scales was 8%, 15%, and 43%, respectively. Total cost per unit product depends inversely on input purity, with phase separation being cheaper than chromatography at the 100 kg/year scale in 100% of cases where input purity was ≤ 1%, compared to about 25% of cases in the dataset as a whole. Finally, we identified a simple factor that strongly predicts phase separation process costs: the mass ratio of reagents versus purified product (the "direct materials usage rate"), which explains up to 58% of variation in cost per unit of purified product among all 290 reports, and up to 98% of variation within particular types of phase separation.

Rapid and green quantification of phloridzin and trilobatin in Lithocarpus litseifolius (Hance) Chun (sweet tea) using an online pressurized liquid extraction high-performance liquid chromatography at equal absorption wavelength method.

Sweet tea is a functional herbal tea with anti-inflammatory, anti-diabetic, and other effects, in which phloridzin and trilobatin are two functional compounds. However, the current methods for their quantification are time-consuming, costly, and environmentally unfriendly. In this paper, we propose a rapid method that integrates online pressurized liquid extraction and high-performance liquid chromatography featuring a superficially porous column for fast separation. Moreover, we employ an equal absorption wavelength method to eliminate using multiple standard solutions and relative calibration factors. Our verification process corroborated the technique's selectivity, accuracy, precision, linearity, and detection limitations. Separately, our methodology demonstrated excellent analytical efficiency, cost-effectiveness, and environmental friendliness. Practical application using six distinct batches of sweet tea samples yielded results in congruence with the external standard method. The analytical rate of this technique is up to over 18 times faster than traditional methods, and organic solvent consumption has been reduced to less than 1.5 mL. Therefore, this method provides a valuable way to achieve quality control and green analysis of sweet tea and other herbal teas.

Rapid Sample Pretreatment Facilitating SERS Detection of Trace Weak Organic Acids/Bases in Simple Matrices.

Surface-enhanced Raman spectroscopy (SERS) is a powerful tool for highly sensitive qualitative and quantitative analyses of trace targets. However, sensitive SERS detection can only be facilitated with a suitable sample pretreatment in fields related to trace amounts for food safety and clinical diagnosis. Currently, the sample pretreatment for SERS detection is normally borrowed and improved from the ones in the lab, which yields a high recovery but is tedious and time-consuming. Rapid detection of trace targets in a complex environment is still a considerable issue for SERS detection. Herein, we proposed a liquid-liquid extraction method coupled with a back-extraction method for sample pretreatment based on the pH-sensitive reversible phase transition of the weak organic acids and bases, where the lowest detectable concentrations were identical before and after the pretreatment process. The sensitive (µg L-1 level) and rapid (within 5 min) SERS detection of either koumine, a weak base, or celastrol, a weak acid, was demonstrated in different drinking water samples and beverages. Furthermore, target generality was demonstrated for a variety of weak acids and bases (2 < pKa < 12), and the hydrophilicity/hydrophobicity of the target determines the pretreatment efficiency. Therefore, the LLE-BE coupled SERS was developed as an easy, rapid, and low-cost tool for the trace detection of the two types of targets in simple matrices, which paved the way toward trace targets in complex matrices.

Controlled Supramolecular Polymerization via Bioinspired, Liquid-Liquid Phase Separation of Monomers.

Dynamic supramolecular assemblies, driven by noncovalent interactions, pervade the biological realm. In the synthetic domain, their counterparts, supramolecular polymers, endowed with remarkable self-repair and adaptive traits, are often realized through bioinspired designs. Recently, controlled supramolecular polymerization strategies have emerged, drawing inspiration from protein self-assembly. A burgeoning area of research involves mimicking the liquid-liquid phase separation (LLPS) observed in proteins to create coacervate droplets and recognizing their significance in cellular organization and diverse functions. Herein, we introduce a novel perspective on synthetic coacervates, extending beyond their established role in synthetic biology as dynamic, membraneless phases to enable structural control in synthetic supramolecular polymers. Drawing parallels with the cooperative growth of amyloid fibrils through LLPS, we present metastable coacervate droplets as dormant monomer phases for controlled supramolecular polymerization. This is achieved via a π-conjugated monomer design that combines structural characteristics for both coacervation through its terminal ionic groups and one-dimensional growth via a π-conjugated core. This design leads to a unique temporal LLPS, resulting in a metastable coacervate phase, which subsequently undergoes one-dimensional growth via nucleation within the droplets. In-depth spectroscopic and microscopic characterization provides insights into the temporal evolution of disordered and ordered phases. Furthermore, to modulate the kinetics of liquid-to-solid transformation and to achieve precise control over the structural characteristics of the resulting supramolecular polymers, we invoke seeding in the droplets, showcasing living growth characteristics. Our work thus opens up new avenues in the exciting field of supramolecular polymerization, offering general design principles and controlled synthesis of precision self-assembled structures in confined environments.

Multiresidue analysis of bat guano using GC-MS/MS.

Bats are the second largest mammalian order and are an endangered species group with a strong need for contamination monitoring. To facilitate non-invasive monitoring of the ecological burden in bat populations, a multiresidue method for the simultaneous quantification of 119 analytes including pesticides, persistent organic pollutants (POPs), active pharmaceutical ingredients (APIs), polycyclic aromatic hydrocarbons (PAHs), UV blockers, plasticizers, and other emerging pollutants in bat guano with gas chromatography tandem mass spectrometry (GC-MS/MS) was developed. Sample preparation and clean-up were performed with a modified QuEChERS approach based on DIN EN 15662. The method uses 1.00 g bat guano as sample with acetonitrile and water for liquid-liquid extraction. Phase separation is assisted by citrate-buffered salting out agent. For clean-up of the extract, primary secondary amine (PSA) was combined with graphitized carbon black (GCB). The lower limits of quantification (LLOQ) ranged between 2.5 and 250 µg kg-1. Linearity was shown in a concentration range from the respective LLOQs to 1250 µg kg-1. The median of the mean recovery was 102.4%. Precision was tested at three concentrations. Method and injection precision were adequate with a relative standard deviation (RSD) below 20%. Furthermore, the comparative analysis with LC-MS/MS demonstrated the reliability of the results and provided a valuable extension of the analytical scope. As proof of concept, three guano samples from a German nursery roost of Myotis myotis were analysed. The results show a time-dependent change in contaminant concentration, highlighting the strong need for non-invasive contamination monitoring of whole bat populations.

An evaluation of the cannabinoid content of the liquid and thermal degradation analysis of cannabis-labeled vape liquids.

Cannabidiol (CBD) vape pen usage has been on the rise given the changing political and scientific climate as well as the promotion of these delivery systems as a more accessible and lower-risk option for consumers. Despite being marketed as a safer way to use cannabis, CBD vape liquids are sold without restrictions or meticulous quality control procedures such as toxicological and clinical assessment, standards for product preservation, or investigative degradation analyses. Nine CBD-labeled vape liquid samples purchased and manufactured in the United States were evaluated and assessed for cannabinoid content. Quantification and validation of cannabinoids and matrix components was accomplished using gas and liquid chromatography with mass spectrometry analysis (GC-MS and LC-MS/MS) following liquid-liquid extraction with methanol. Samples degraded by temperature (analyzed by GC-MS) showed a greater disparity from the labeled CBD content compared with samples analyzed as purchased (by LC-MS/MS). Thermal degradation of the vape liquids showed increased levels of tetrahydrocannabinol (THC). Also, extended time and temperature degradation were evaluated in vape liquids by storing them for 15 months and then varying temperature conditions before analysis, which indicated CBD transformed into other cannabinoids leading to different cannabinoid content within the vape samples. Evaluation conducted on these vape liquids indicated the route of exposure, storage conditions, and length of storage could expose consumers to unintended cannabinoids and showed a concerning level of disagreement between the products' labeled cannabinoid content and the results generated by these analyses.

Practical deployment of automation to expedite aqueous two-phase extraction.

The feasibility of bioprocess development relies heavily on the successful application of primary recovery and purification techniques. Aqueous two-phase extraction (ATPE) disrupts the definition of "unit operation" by serving as an integrative and intensive technique that combines different objectives such as the removal of biomass and integrated recovery and purification of the product of interest. The relative simplicity of processing large samples renders this technique an attractive alternative for industrial bioprocessing applications. However, process development is hindered by the lack of easily predictable partition behaviours, the elucidation of which necessitates a large number of experiments to be conducted. Liquid handling devices can assist to address this problem; however, they are configured to operate using low viscosity fluids such as water and water-based solutions as opposed to highly viscous polymeric solutions, which are typically required in ATPE. In this work, an automated high throughput ATPE process development framework is presented by constructing phase diagrams and identifying the binodal curves for PEG6000, PEG3000, and PEG2000. Models were built to determine viscosity- and volume-independent transfer parameters. The framework provided an appropriate strategy to develop a very precise and accurate operation by exploiting the relationship between different liquid transfer parameters and process error. Process accuracy, measured by mean absolute error, and device precision, evaluated by the coefficient of variation, were both shown to be affected by the mechanical properties, particularly viscosity, of the fluids employed. For PEG6000, the mean absolute error improved by six-fold (from 4.82% to 0.75%) and the coefficient of variation improved by three-fold (from 0.027 to 0.008) upon optimisation of the liquid transfer parameters accounting for the viscosity effect on the PEG-salt buffer utilising ATPE operations. As demonstrated here, automated liquid handling devices can serve to streamline process development for APTE enabling wide adoption of this technique in large scale bioprocess applications.

Synergistic utility of NBD-Cl fluorogenic loading activity and salting-out assisted liquid-liquid extraction as sample pretreatment in rasagiline tracking in different matrices.

A typical drug used to treat Parkinson's disease is called rasagiline. It belongs to an assortment of drugs known as monoamine oxidase inhibitors, which function by raising dopamine levels in the brain. This work created a unique spectrofluorimetric method for the analytical assay of rasagiline for the first time. The approach utilized the synergistic utility of the fluorogenic properties of benzofurazan and salting-out assisted liquid-liquid extraction. By combining these techniques an ultrasensitive, and highly selective methodology for the assay of rasagiline was established. Measurements were made of the resultant yellow fluorescent product at 533 nm by applying an excitation wavelength of 475.3 nm. The calibration graph was examined to assess its linearity across a range of 30-600 ng/ml. Through estimation, the limit of detection was discovered to be 8.9 ng/ml, while the quantitation limit was estimated to be 27 ng/ml. All relevant parameters influencing the fulfillment of the developed method were thoroughly examined and tuned. Following the directives set by the (ICH) the suggested approach was confirmed and demonstrated its capability for the accurate determination of rasagiline in tablets, as well as for testing content uniformity. The incorporation of salting-out assisted liquid-liquid extraction technology enables effective tracking of rasagiline in plasma samples, providing a novel and innovative approach for its analysis in biological matrices.

Evaluation of Iron Chlorin e6 disappearance and hydrolysis in soil and garlic using salting-out assisted liquid-liquid extraction coupled with high-performance liquid chromatography and ultraviolet-visible detection.

Iron Chlorin e6 (ICE6), a star plant growth regulator (PGR) with independent intellectual property rights in China, has demonstrated its efficacy through numerous field experiments. We innovatively employed salting-out assisted liquid-liquid extraction (SALLE) with HPLC-UV/Vis to detect ICE6 residues in water, soil, garlic seeds, and sprouts. Using methanol and a C18 column with acetonitrile: 0.1% phosphoric acid mobile phase (55:45, v:v), we achieved a low LOQ of 0.43 to 0.77 µg kg-1. Calibration curves showed strong linearity (R2 > 0.992) within 0.01 to 5.00 mg kg-1. Inter-day and intra-day recoveries (0.05 to 0.50 mg kg-1) demonstrated high sensitivity and accuracy (recoveries: 75.36% to 107.86%; RSD: 1.03% to 8.78%). Additionally, density functional theory (DFT) analysis aligned UV/Vis spectra and indicated ICE6's first-order degradation (2.03 to 4.94 days) under various environmental conditions, mainly driven by abiotic degradation. This study enhances understanding of ICE6's environmental behavior, aids in risk assessment, and guides responsible use in agroecosystems.

Determining pyroxasulfone herbicide in honey samples using liquid-liquid extraction with low temperature purification (LLE-LTP).

Pyroxasulfone is a selective, systemic, pre-emergence herbicide which acts to inhibit weeds in potato, coffee, sugar cane, eucalyptus, and soybean plantations, among others. This active ingredient was classified by Brazilian legislation as a very dangerous product for the environment, and to date there are no studies involving the development of extraction methods for monitoring this compound in environmental matrices. Therefore, the objective of this study was to optimize and validate liquid-liquid extraction with low temperature purification followed by a gas chromatography coupled to mass spectrometry analysis to determine this herbicide in honey samples. The results showed that the best extractor phase was acetonitrile and ethyl acetate (6.5 mL:1.5 mL), with recovery rates close to 100% and relative standard deviations below 11%. The validation proved that the extraction method was selective, precise, accurate and linear in the range of 3-225 µg kg-1, reaching a limit of quantification of 3 µg kg-1, with a -25.95% matrix effect. Monitoring on real samples did not reveal episodes of environmental contamination with pyroxasulfone residue.

Development of salt-induced homogeneous liquid-liquid extraction using a deep eutectic solvent performed in a narrow-bore tube for the extraction of Zn(II), Cu(II), and Cd(II) ions from honey samples.

In this study, a sample preparation procedure based on salt-induced homogeneous liquid-liquid extraction performed in a narrow-bore tube was used for the preconcentration and extraction of Zn(II), Cu(II), and Cd(II) ions from honey samples. To perform the procedure, a mixture of working solution containing sodium chloride, acetonitrile, and a synthesized deep eutectic solvent (as an extraction solvent) was transferred into a narrow tube filled with solid sodium chloride up to a specific level. As the solution flowed through the tube, tiny droplets of the extraction solvent were formed at the boundary between the solution and salt layer. The droplets moved upwards in the tube and eventually collected as a distinct layer on the top of the solution. The separated phase was removed and dispersed into ionized water. After centrifugation, tiny droplets of the extraction solvent containing the analytes were sedimented at the bottom of the tube. The concentrated analytes were measured using flame atomic absorption spectrophotometry. The linear ranges and extraction recoveries were obtained in the ranges of 1.5-100 µg kg-1 and 89.6-94.8%, respectively. The detection limits ranged from 0.35 to 0.48 µg kg-1. Low relative standard deviations (C = 10 µg L-1, n = 6) of 3.1, 2.8, and 3.4% for Zn(II), Cu(II), and Cd(II), respectively, were obtained. Finally, the optimized method was successfully used in determination of concentration of the selected heavy metal ions in various honey samples.

A fast method for the determination of personal care product chemicals in human urine using dispersive liquid-liquid extraction and ultra high-performance liquid chromatography-tandem mass spectrometry.

RATIONALE: Personal care product chemicals (PCPCs) are the chemicals used in personal care products. Many of them are endocrine disruptors and have potential adverse effects on humans. The concentrations of PCPCs in urine are the main biomarker for assessing human exposure. METHODS: A method was developed for the simultaneous determination of 14 PCPCs in human urine using dispersive liquid-liquid extraction combined with ultra high-performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS). RESULTS: Compared with liquid-liquid extraction, this method had the advantages of time efficiency, sensitivity, and limited organic solvent consumption. It produced good linearity (0.9965-0.9996), limits of detection (2.82-36.36 pg mL-1 ), limits of quantitation (9.39-121.08 pg mL-1 ), matrix effect (-0.90%-2.55%), intra-day precision (relative standard deviations [RSDs] <15%), and inter-day precision (RSDs <19.9%). The method had satisfactory relative recovery at three concentration levels. CONCLUSIONS: A rapid method was developed for the simultaneous quantification of 14 PCPCs in human urine. The practicability of the method was verified with 21 urine from university students. It is expected that this method will provide a powerful reference for the assessment of exposure to PCPCs in large populations.

Dual optical detection approach for capillary electrophoresis following two-step liquid-liquid extraction to determine ten phenols in water samples.

In this research, the analytical method was developed and evaluated for determining phenol and its nine derivatives belong to the US EPA priority pollutant list in water samples by using dual-channeled capillary electrophoresis (CE) coupled with two types of optical detectors, namely LED-induced fluorescence (LEDIF) and ultraviolet (UV) detectors. The optimal background electrolytes for the first and second CE channels were 20 mM borate (pH 9.80) with 400 µM fluorescein and 55 mM borate (pH 11.75), respectively. The two-step liquid-liquid extraction (LLE) was used for sample preparation and enrichment, in which phenol and its derivatives were extracted from the aqueous phase using 10 mL of n-hexane/1-octanol (60/40, v/v) and then were back extracted into a 0.1 M NaOH as a final acceptor phase. Under the optimal CE and two-step LLE conditions, the enrichment factors of 10 phenols were 184 - 1120-fold, and the method detection limits were lowered to 0.02-0.60 µg/L. The obtained intra-day and inter-day precisions in terms of relative standard deviations (RSD) were between 4.0 and 7.3 % and 6.7 and 14 %, respectively. This approach was used to determine phenols in water samples, with recoveries ranging from 82.0 to 108.9 %. In combination with sample enrichment by two-step LLE extraction, this is the first CE study conducted to determine phenols in the EPA list using two detector approaches, specifically CE-LEDIF/CE-UV.

Optimised liquid chromatography tandem mass spectrometry method for the simultaneous quantification of serum vitamin D analogues while also accounting for epimers and isobars.

The accurate quantification of multiple vitamin D analogues simultaneously is challenging. This study set out to use liquid chromatography-tandem mass spectrometry (LC-MS/MS) to develop a method capable of measuring a comprehensive vitamin D profile, encompassing twelve vitamin D analogues (vitamin D2, D3, 25(OH)D2, 25(OH)D3, 1,25(OH)2D2, 1,25(OH)2D3, 24,25(OH)2D2, 24,25(OH)2D3, 3-epi-25(OH)D2, 3-epi-25(OH)D3, 7αC4 and1α(OH)D3) in a single run. Serum samples were prepared using double liquid-liquid extraction and analysed on an Agilent 6460 QQQ LC-MS/MS equipped with a Pursuit 3 Pentafluorophenyl (4.6 x 100 mm, 3 µm) column. Recovery rates for all analytes were above 95 % with a coefficient of variation (CV) below 10 %. The method exhibited good linearity (r > 0.995) and had a range of detection limits between 0.01 and 0.35 ng/mL and quantification limits between 0.15 and 0.96 ng/mL. Repeatability and within-lab precision were acceptable, with CV values below 10 % and 15 %, respectively. Method accuracy was excellent, with a systematic error below 6.60 %. additionally, all analytes-maintained stability for 48 h following sample preparation, and no interferences were observed among co-eluting analytes. Lastly, this method achieved "world-class" status according to the Sigma metric scale specifications, requiring minimal quality control to ensure data quality. This successfully validated method has the potential not only for improving vitamin D profiling procedures but also for aiding in the diagnosis of other genetic disorders where measuring beyond 25(OH)D is crucial.