Reducing SAR in 7T brain fMRI by circumventing fat suppression while removing the lipid signal through a parallel acquisition approach.

Ultra-high-field functional magnetic resonance imaging (fMRI) offers a way to new insights while increasing the spatial and temporal resolution. However, a crucial concern in 7T human MRI is the increase in power deposition, supervised through the specific absorption rate (SAR). The SAR limitation can restrict the brain coverage or the minimal repetition time of fMRI experiments. In the majority of today's studies fMRI relies on the well-known gradient-echo echo-planar imaging (GRE-EPI) sequence, which offers ultrafast acquisition. Commonly, the GRE-EPI sequence comprises two pulses: fat suppression and excitation. This work provides the means for a significant reduction in the SAR by circumventing the fat-suppression pulse. Without this fat-suppression, however, lipid signal can result in artifacts due to the chemical shift between the lipid and water signals. Our approach exploits a reconstruction similar to the simultaneous-multi-slice method to separate the lipid and water images, thus avoiding undesired lipid artifacts in brain images. The lipid-water separation is based on the known spatial shift of the lipid signal, which can be detected by the multi-channel coils sensitivity profiles. Our study shows robust human imaging, offering greater flexibility to reduce the SAR, shorten the repetition time or increase the volume coverage with substantial benefit for brain functional studies.

Low-Dose Computed Tomography With Two- and Three-Dimensional Postprocessing as an Alternative to Plain Radiography for Intrathecal Catheter Visualization: A Phantom Pilot Study.

OBJECTIVES: In intrathecal drug delivery, visualization of the device has been performed with plain radiography. However, the visibility of the related structures can be problematic. In troubleshooting, after the contrast material injection via the catheter access port, a computed tomography (CT) scan has been used. In troubleshooting, we also used a non-contrast CT scan with 2D and 3D reconstructions. With the current phantom study, we aimed to obtain high-resolution imaging of a poor opaque catheter with the use of a low-dose single-energy 2D and 3D CT scan with limited radiation exposure as a substitute for plain radiography. MATERIALS AND METHODS: The catheter was placed into a fatty substance and mounted on an anthropomorphic abdomen phantom followed by CT with varying kVp settings and with added tin beam filtering. Dose levels corrected based on the spinal catheter tip on T8 would result in a calculated effective dose in the range of the mSv's calculated for the plain x-ray examination. RESULTS: Ultimately, Sn100 kVp has the best trade-off between visibility, artifacts, and noise for a fixed dose. Although 3D VRT imaging was challenging at this low dose level, we could make a full evaluation possible with complementary 2D projections. CONCLUSIONS: We could correctly identify the catheter and related structures, which supports the investigation of this in vivo and side-by-side evaluation with plain radiography. If found superior, then this technique may be able to replace plain radiography, while providing better visualization and acceptable radiation exposure. CONFLICT OF INTEREST: Dr. Delhaas reports personal fees from Medtronic Inc., as a previous consultant, outside the submitted work; Prof. van der Lugt reports grants from GE Healthcare, Siemens, Stryker, Medtronic, and Penumbra outside the submitted work.

Simultaneous R2* and quantitative susceptibility mapping measurement enables differentiation of thrombus hematocrit and age: an in vitro study at 3 T.

BACKGROUND: The efficacy of acute ischemic stroke treatment is affected by thrombus composition and age, yet no diagnostic method capable of quantitative thrombus characterization currently exists. This in vitro study evaluates the use of R2* , quantitative susceptibility mapping (QSM), and proton density fat fraction (FF) maps derived from a single gradient echo (GRE) MRI acquisition for characterizing clot of various hematocrit, as well as added calcified and lipidic components, throughout aging. METHODS: Two thrombus phantoms containing porcine clots (10-60% hematocrit, one with added calcium or lard) were scanned serially throughout 6 days of aging. Three-dimensional multi-echo GRE imaging was used to generate R2* , QSM, and FF maps, from which mean values for all clots at every time point were obtained. Receiver operating characteristic analysis was used to derive thresholds differentiating acute from chronic clot, and measured R2* and QSM were tested for their ability to estimate clot hematocrit. RESULTS: R2* and QSM varied minimally over the first 6 hours of aging (acute), and QSM was found to linearly relate to clot hematocrit. Beyond 6 hours (chronic), R2* and QSM increased considerably over time and hematocrit could be estimated from the R2* /QSM ratio. R2* and QSM thresholds of 22 s-1 and 0.165 ppm differentiated acute from chronic clots with a sensitivity/specificity of 100%/100% and 85%/92%, respectively. QSM and FF maps definitively distinguished calcium and lipid, respectively, from clots of any hematocrit and age. CONCLUSIONS: R2* , QSM, and FF from a single multi-echo GRE scan discriminated hematocrit and age, and distinguished calcification and lipid withinin vitro clot.

Electron-tracking Compton camera imaging of technetium-95m.

Imaging was conducted using an electron tracking-Compton camera (ETCC), which measures γ-rays with energies in the range of 200-900 keV from 95mTc. 95mTc was produced by the 95Mo(p, n)95mTc reaction on a 95Mo-enriched target. A method for recycling 95Mo-enriched molybdenum trioxide was employed, and the recycled yield of 95Mo was 70%-90%. Images were obtained with the gate of three energies. The results showed that the spatial resolution increases with increasing γ-ray energy, and suggested that the ETCC with high-energy γ-ray emitters such as 95mTc is useful for the medical imaging of deep tissue and organs in the human body.

MR-compatible, 3.8 inch dual organic light-emitting diode (OLED) in-bore display for functional MRI.

PURPOSE: Functional MRI (fMRI) is a well-established method used to investigate localised brain activation by virtue of the blood oxygen level dependent (BOLD) effect. It often relies on visual presentations using beam projectors, liquid crystal display (LCD) screens, and goggle systems. In this study, we designed an MR compatible, low-cost display unit based on organic light-emitting diodes (OLED) and demonstrated its performance. METHODS: A 3.8" dual OLED module and an MIPI-to-HDMI converter board were used. The OLED module was enclosed using a shielded box to prevent noise emission from the display module and the potentially destructive absorption of high power RF from the MRI transmit pulses. The front of the OLED module was covered by a conductive, transparent mesh. Power was supplied from a non-magnetic battery. The shielding of the display was evaluated by directly measuring the electromagnetic emission with the aid of a pickup loop and a low noise amplifier, as well as by examining the signal-to-noise ratio (SNR) of phantom MRI data. The visual angle of the display was calculated and compared to standard solutions. As a proof of concept of the OLED display for fMRI, a healthy volunteer was presented with a visual block paradigm. RESULTS: The OLED unit was successfully installed inside a 3 T MRI scanner bore. Operation of the OLED unit did not degrade the SNR of the phantom images. The fMRI data suggest that visual stimulation can be effectively delivered to subjects with the proposed OLED unit without any significant interference between the MRI acquisitions and the display module itself. DISCUSSION: We have constructed and evaluated the MR compatible, dual OLED display for fMRI studies. The proposed OLED display provides the benefits of high resolution, wide visual angle, and high contrast video images during fMRI exams.

Fat-Water Phantoms for Magnetic Resonance Imaging Validation: A Flexible and Scalable Protocol.

As new techniques are developed to image adipose tissue, methods to validate such protocols are becoming increasingly important. Phantoms, experimental replicas of a tissue or organ of interest, provide a low cost, flexible solution. However, without access to expensive and specialized equipment, constructing stable phantoms with high fat fractions (e.g., >50% fat fraction levels such as those seen in brown adipose tissue) can be difficult due to the hydrophobic nature of lipids. This work presents a detailed, low cost protocol for creating 5x 100 mL phantoms with fat fractions of 0%, 25%, 50%, 75%, and 100% using basic lab supplies (hotplate, beakers, etc.) and easily accessible components (distilled water, agar, water-soluble surfactant, sodium benzoate, gadolinium-diethylenetriaminepentacetate (DTPA) contrast agent, peanut oil, and oil-soluble surfactant). The protocol was designed to be flexible; it can be used to create phantoms with different fat fractions and a wide range of volumes. Phantoms created with this technique were evaluated in the feasibility study that compared the fat fraction values from fat-water magnetic resonance imaging to the target values in the constructed phantoms. This study yielded a concordance correlation coefficient of 0.998 (95% confidence interval: 0.972-1.00). In summary, these studies demonstrate the utility of fat phantoms for validating adipose tissue imaging techniques across a range of clinically relevant tissues and organs.

[Development of a digital chest phantom for studies on energy subtraction techniques].

Digital chest phantoms continue to play a significant role in optimizing imaging parameters for chest X-ray examinations. The purpose of this study was to develop a digital chest phantom for studies on energy subtraction techniques under ideal conditions without image noise. Computed tomography (CT) images from the LIDC (Lung Image Database Consortium) were employed to develop a digital chest phantom. The method consisted of the following four steps: 1) segmentation of the lung and bone regions on CT images; 2) creation of simulated nodules; 3) transformation to attenuation coefficient maps from the segmented images; and 4) projection from attenuation coefficient maps. To evaluate the usefulness of digital chest phantoms, we determined the contrast of the simulated nodules in projection images of the digital chest phantom using high and low X-ray energies, soft tissue images obtained by energy subtraction, and "gold standard" images of the soft tissues. Using our method, the lung and bone regions were segmented on the original CT images. The contrast of simulated nodules in soft tissue images obtained by energy subtraction closely matched that obtained using the gold standard images. We thus conclude that it is possible to carry out simulation studies based on energy subtraction techniques using the created digital chest phantoms. Our method is potentially useful for performing simulation studies for optimizing the imaging parameters in chest X-ray examinations.

Effects of nonlinear propagation in ultrasound contrast agent imaging.

This paper investigates two types of nonlinear propagation and their effects on image intensity and contrast-to-tissue ratio (CTR) in contrast ultrasound images. Previous studies have shown that nonlinear propagation can occur when ultrasound travels through tissue and microbubble clouds, making tissue farther down the acoustic path appear brighter in pulse inversion (PI) images, thus reducing CTR. In this study, the effect of nonlinear propagation through tissue or microbubbles on PI image intensity and CTR are compared at low mechanical index. A combination of simulation and experiment with SonoVue microbubbles were performed using a microbubble dynamics model, a laboratory ultrasound system and a clinical prototype scanner. The results show that, close to the bubble resonance frequency, nonlinear propagation through a bubble cloud of a few centimeter thickness with a modest concentration (1:10000 dilution of SonoVue microbubbles) is much more significant than through tissue-mimicking material. Consequently, CTR in regions distal to the imaging probe is greatly reduced for nonlinear propagation through the bubble cloud, with as much as a 12-dB reduction compared with nonlinear propagation through tissue-mimicking material. Both types of nonlinear propagation cause only a small change in bubble PI signals at the bubble resonance frequency. When the driving frequency increases beyond bubble resonance, nonlinear propagation through bubbles is greatly reduced in absolute values. However because of a greater reduction in nonlinear scattering from bubbles at higher frequencies, the corresponding CTR is much lower than that at bubble resonance frequency.

An investigation of the potential of rapid prototyping technology for image guided surgery.

Image-guided surgery can be broken down into two broad categories: frame-based guidance and frameless guidance. In order to reduce both the invasive nature of stereotactic guidance and the cost in equipment and time, we have developed a new guidance technique based on rapid prototyping (RP) technology. This new system first builds a computer model of the patient anatomy and then fabricates a physical reference frame that provides a precise and unique fit to the patient anatomy. This frame incorporates a means of guiding the surgeon along a preplanned surgical trajectory. This process involves (1) obtaining a high-resolution CT or MR scan, (2) building a computer model of the region of interest, (3) developing a surgical plan and physical guide, (4) designing a frame with a unique fit to the patient's anatomy with a physical linkage to the surgical guide, and (5) fabricating the frame using an RP unit. Software was developed to support these processes. To test the accuracy of this process, we first scanned and reproduced a plastic phantom fabricated to validate the system's ability to build an accurate virtual model. A target on the phantom was then identified, a surgical approach planned, a surgical guide designed, and the accuracy and precision of guiding a probe to that target were determined. Steps 1 through 5 were also evaluated using a head phantom. The results show that the RP technology can replicate an object from CT scans with submillimeter resolution. The fabricated reference frames, when positioned on the surface of the phantom and used to guide a surgical probe, can position the probe tip with an accuracy of 1.7 mm at the probe tip. These results demonstrate that the RP technology can be used for the fabrication of customized positioning frames for use in image-guided surgery.

[High-resolution magnetoencephalography--studies with a small-volume phantom]. / Hochauflösende Magnetoenzephalographie--Untersuchungen mit einem kleinvolumigen Phantom.

To investigate the spatiotemporal organisation of neuronal processes in an animal model using magnetoencephalography (MEG), a high temporal resolution (ms) and an appropriate spatial resolution of about 1 mm is necessary. With the aim of determining the localization error and the resolution power of high-resolution MEG systems, we developed a phantom capable of simulating the characteristics of animal models. The phantom enables us to variably position at least two magnetic field sources to within 0.1 mm. For source localization on the basis of the magnetic field data, a spatial filtering algorithm was used. The investigation of a 16-channel micro SQUID-MEG system with a current dipole orientated tangentially to the phantom surface produced the following localization data (min ... max, x, y--horizontal plane, z--depth); systematic localization error e(x) = 1.16 ... 1.67 mm, e(y) = -1.01 ... -1.28 mm, e(z) = -5.22 ... -7.64 mm, standard deviation of the individual measurements perpendicular to the dipole axis s(perp) = 0.05 ... 0.22 mm, along this axis s(long) = 0.20 ... 1.73 mm, in the depths sz = 0.17 ... 3.17 mm. The "goodness of fit" was > 95%. Separation of two dipoles was still possible for parallel dipoles at a distance apart of d(parallel) = 0.03 mm and for those oriented perpendicularly to each other at a distance apart of d(perp) = 0.10 mm. On the basis of these results we conclude that the MEG system can achieve a resolution sufficient to permit the investigation of neuronal microstructures. The spatial errors detected were related to sensor position in the cryostatic vessel as well as to external low-frequency noise.

Realistic computerized human phantoms.

To estimate the risk resulting from exposures to ionizing radiation, the organ and tissue doses should be assessed. A convenient method is the calculation of these doses using representations of the human body, called models or phantoms, together with computer codes simulating the transport of radiation in the body. Most commonly used are mathematical phantoms whose external and internal volumes are defined by simple geometric bodies. More recently, phantoms constructed from computed tomographic data of real persons were introduced as an improvement. These phantoms present advantages concerning the location and shape of the organs, in particular the hard bone and bone marrow, whose distribution can be assessed with high resolution. So far, three of these phantoms were constructed at the GSF, a fourth is under process. The construction technique is described, and some calculational results of organ doses due to external photon irradiation are presented.