In vivo axial load-share ratio measurement using a novel hexapod system for safe external fixator removal.

BACKGROUND: External fixation is widely used in the treatment of traumatic fractures; however, orthopedic surgeons encounter challenges in deciding the optimal time for fixator removal. The axial load-share ratio (LS) of the fixator is a quantitative index to evaluate the stiffness of callus healing. This paper introduces an innovative method for measuring the LS and assesses the method's feasibility and efficacy. Based on a novel hexapod LS-measurement system, the proposed method is to improve the convenience and precision of measuring LS in vivo, hence facilitating the safe removal of external fixators. METHODS: A novel hexapod system is introduced, including its composition, theoretical model, and method for LS measurement. We conducted a retrospective study on 82 patients with tibial fractures treated by the Taylor Spatial Frame in our hospital from September 2018 to June 2020, of which 35 took LS measurements with our novel method (Group I), and 47 were with the traditional method (Group II). The external fixator was removed when the measurement outcome (LS < 10%) was consistent with the surgeon's diagnosis based on the clinical and radiological assessment (bone union achieved). RESULTS: No significant difference was found in the fracture healing time (mean 25.3 weeks vs. 24.9 weeks, P > 0.05), frame-wearing duration (mean 25.5 weeks vs. 25.8 weeks, P > 0.05), or LS measurement frequency (mean 1.1 times vs. 1.2 times, P > 0.05). The measurement system installation time in Group I was significantly shorter compared to Group II (mean 14.8 min vs. 81.3 min, P < 0.001). The LS value of the first measurement in Group I was lower than that of Group II (mean 5.1% vs. 6.9%, P = 0.011). In Group I, the refracture rate was 0, but in Group II it was 4.3% (2/47, P > 0.05). CONCLUSION: The novel hexapod LS-measurement system and involved method demonstrated enhanced convenience and precision in measuring the LS of the external fixator in vivo. The LS measurement indicates the callus stiffness of fracture healing, and is applicable to evaluate the safety of removing the fixator. Consequently, it is highly recommended for widespread adoption in clinical practice.

Biomechanical comparative study on external fixators of new configurations in the treatment of Tile C pelvic injury.

To compare the biomechanical properties of several anterior pelvic ring external fixators with two new configurations in the treatment of Tile C pelvic fractures, in order to evaluate the effectiveness of the new configurations and provide a reference for their clinical application. A finite element model of a Tile C pelvic ring injury (unilateral longitudinal sacral fracture and ipsilateral pubic fracture) was constructed. The pelvis was fixed with iliac crest external fixator (IC), anterior inferior iliac spine external fixator (AIIS), combination of IC and AIIS, combination of anterior superior iliac spine external fixator (ASIS) and AIIS, and S1 sacroiliac screw in 5 types of models. The stability indices of the anterior and posterior pelvic rings under vertical longitudinal load, left-right compression load and anterior-posterior shear load were quantified and compared. In the simulated bipedal standing position, the results of the vertical displacement of the midpoint on the upper surface of the sacrum are consistent with the displacement of the posterior rotation angle, and the order from largest to smallest is IC, AIIS, ASIS + AIIS, IC + AIIS and S1 screw. The longitudinal displacement of IC is greater than that of the other models. The displacements of ASIS + AIIS and IC + AIIS are similar and the latter is smaller. In the simulated semi-recumbent position, the vertical displacement and posterior rotation angle displacement of the midpoint on the upper surface of the sacrum are also consistent, ranking from large to small: IC, AIIS, ASIS + AIIS, IC + AIIS and S1 screw. Under the simulated left-right compression load state, the lateral displacements of the highest point of the lateral sacral fracture end are consistent with the highest point of the lateral pubic fracture end, and the order from large to small is S1 screw, IC, AIIS, ASIS + AIIS and IC + AIIS, among which the displacements of S1 screw and IC are larger, and the displacements of ASIS + AIIS and IC + AIIS are similar and smaller than those of other models. The displacements of IC + AIIS are smaller than those of ASIS + AIIS. Under the simulated anterior-posterior shear load condition, the posterior displacements of the highest point of the lateral sacral fracture end and the highest point of the lateral pubic fracture end are also consistent, ranking from large to small: IC, AIIS, ASIS + AIIS, IC + AIIS and S1 screw. Among them, the displacements of IC and AIIS are larger. The displacements of ASIS + AIIS and IC + AIIS are similar and the latter are smaller. For the unstable pelvic injury represented by Tile C pelvic fracture, the biomechanical various stabilities of the combination of IC and AIIS are superior to those of the external fixators of conventional configurations. The biomechanical stabilities of the combination of ASIS and AIIS are also better than those of the external fixators of conventional configurations, and slightly worse than those of the combination of IC and AIIS. Compared with sacroiliac screw and conventional external fixators, the lateral stabilities of IC + AIIS and ASIS + AIIS are particularly prominent.

Five-Year Follow-Up of Surgery vs Functional Bracing for Closed Displaced Humeral Shaft Fractures.

This study compares outcomes of surgery and functional bracing for closed humeral shaft fractures after 5 years of follow-up.

[A retrospective study on manual reduction combined with Chinese Orthopaedic ankle external fixator in the treatment of trimalleolar fracture].

OBJECTIVE: To evaluate the needle puncture safety and clinical efficacy of manual reduction combined with external fixation of ankle frame in the treatment of trimalleolar fracture under the guidance of Chinese Osteosynthesis (CO) theory. METHODS: The clinical data of 118 patients with trimalleolar fractures admitted from December 2010 to December 2021 were retrospectively analyzed. Fifty-three patients were treated with manual reduction combined with external fixation of ankle frame(observation group). Sixty-five patients were treated with open reduction and internal fixation with plate and screws(control group). The operation time, hospitalization days, non-weight-bearing time of the affected limb, clinical healing time of fracture, incidence of complications, visual analogue scale (VAS) before and 1 month after operation, and American Orthopedic Foot and Ankle Society(AOFAS) score of ankle joint before and 1 year after operation were compared between the two groups. RESULTS: Patients in both groups were followed up for more than 1 year. All patients were followed up, and the duration ranged from 14 to 70 months, with an average of(35.28±14.66) months. There were statistically significant in operation time, hospitalization days, non-load-bearing time of affected limbs, clinical healing time of fractures and VAS score one month after operation between the two groups. One month after operation, the VAS score of the observation group was lower than that of the control group(t=3.343, P=0.001). The operation time of the observation group was significantly shorter than that of the control group(t=9.091, P=0.000). The hospitalization days in the observation group were significantly less than those in the control group(t=5.034, P=0.000). The non-load-bearing time of the affected limb in the observation group was significantly shorter than that in the control group(t=11.960, P=0.000). The clinical healing time of fracture in the observation group was significantly shorter than that in the control group(t=4.007, P=0.000). There was no significant difference in AOFAS score between the two groups one year after operation(t=0.417, P=0.678). In the observation group, there were 2 cases of pinhole infection and 3 cases of loss of reduction less than 2 mm. There were 3 cases of surgical incision infection in the control group. There was no significant difference in the incidence of complications between the two groups(χ2=0.446, P=0.504). CONCLUSION: Manual reduction combined with external fixation is safe and effective in the treatment of trimalleolar fracture under the guidance of CO theory, and the function of ankle joint recovers well after operation. This therapy has good clinical value.

A Modified Technique of Percutaneous Fixation of Displaced Pediatric Lateral Humeral Condyle Elbow Fractures (aka the Martini Technique): A Brief Case Series.

Displaced lateral humeral condyle (LHC) fractures have routinely been treated with open reduction, which has known postoperative complications. Recent reports show that closed reduction and percutaneous pinning (CRPP) is a valid treatment. Five pediatric patients with displaced LHC fractures were included in a retrospective case series. Closed reductions (CRs) were facilitated by Kirschner wire placement into the capitellum through a toothed drill guide. The Kirschner wire and drill guide were used like a joystick to manipulate the fragment and maintain reduction for placement of additional Kirschner wires. Patient records were used to determine the number of patients diagnosed with LHC fractures between 2011 to 2022 among six pediatric orthopaedic surgeons at one institution along with the treatment and associated complications. Satisfactory reduction of displaced LHC fractures was achieved with CRPP in all patients with no complications using the "martini" modification. Of 26 LHC fractures, 16 were treated with CRPP/CRPS and 10 with open reduction and percutaneous pinning/open reduction and internal fixation, with four converted from CR to OR. Complications included one superficial infection in the CR group and four stiff elbows and one nonunion in the OR group option for LHC fractures. CRPP is an effective treatment option with a decreased risk of complications. Our modified reduction technique may help improve the success and results of closed treatment of LHC fractures.

Clinical Results of Closed Reduction and Percutaneous Pinning for Gartland Type II Flexion-Type Supracondylar Humeral Fractures in Children: Report of Three Cases.

Supracondylar humerus fractures are the most common upper limb injury in children, but the incidence of flexion-type fractures is relatively low. Herein, we report the clinical results for three children with Gartland type II flexion-type supracondylar humeral fractures treated by closed reduction and percutaneous pinning. From April 2004 to March 2020, 102 children with supracondylar humeral fractures underwent surgery at our hospital and related institutions. Four had a flexion-type supracondylar humeral fracture (3.9%). Three patients (1 boy and 2 girls) with Gartland type II flexion-type supracondylar humeral fractures were followed for more than 12 months. The patients were treated by closed reduction and percutaneous pinning. Age was 7-13 years at the time of injury, and the duration of postoperative follow-up was 12-16 months. In one case, ulnar nerve paresis was observed as a preoperative complication. After performing closed reduction, percutaneous Kirschner wire cross-fixation was performed. Subsequently, long upper limb cast fixation was carried out for 4 weeks postoperatively. One patient developed preoperative nerve paralysis but recovered in approximately 3 months, without postoperative complications such as infection, nerve paralysis, or cubitus varus or valgus deformity. Flynn's criteria results were excellent for two patients and good for one patient. To maintain anatomical reduction of the fracture fragment, closed reduction using a traction table and percutaneous steel wire fixation are useful for treating flexion-type supracondylar humerus fractures in children with Gartland type II fractures.

Accuracy of osseointegrated screw-bone construct stiffness and peri-implant loading predicted by homogenized FE models relative to micro-FE models.

Computational predictions of stiffness and peri-implant loading of screw-bone constructs are highly relevant to investigate and improve bone fracture fixations. Homogenized finite element (hFE) models have been used for this purpose in the past, but their accuracy has been questioned given the numerous simplifications, such as neglecting screw threads and modelling the trabecular bone structure as a continuum. This study aimed to investigate the accuracy of hFE models of an osseointegrated screw-bone construct when compared to micro-FE models considering the simplified screw geometry and different trabecular bone material models. Micro-FE and hFE models were created from 15 cylindrical bone samples with a virtually inserted, osseointegrated screw (fully bonded interface). Micro-FE models were created including the screw with threads (=reference models) and without threads to quantify the error due to screw geometry simplification. In the hFE models, the screws were modelled without threads and four different trabecular bone material models were used, including orthotropic and isotropic material derived from homogenization with kinematic uniform boundary conditions (KUBC), as well as from periodicity-compatible mixed uniform boundary conditions (PMUBC). Three load cases were simulated (pullout, shear in two directions) and errors in the construct stiffness and the volume average strain energy density (SED) in the peri-implant region were evaluated relative to the micro-FE model with a threaded screw. The pooled error caused by only omitting screw threads was low (max: 8.0%) compared to the pooled error additionally including homogenized trabecular bone material (max: 92.2%). Stiffness was predicted most accurately using PMUBC-derived orthotropic material (error: -0.7 ± 8.0%) and least accurately using KUBC-derived isotropic material (error: +23.1 ± 24.4%). Peri-implant SED averages were generally well correlated (R2 ≥ 0.76), but slightly over- or underestimated by the hFE models and SED distributions were qualitatively different between hFE and micro-FE models. This study suggests that osseointegrated screw-bone construct stiffness can be predicted accurately using hFE models when compared to micro-FE models and that volume average peri-implant SEDs are well correlated. However, the hFE models are highly sensitive to the choice of trabecular bone material properties. PMUBC-derived isotropic material properties represented the best trade-off between model accuracy and complexity in this study.

Biomechanical Study of Intramedullary Versus Extramedullary Implants for Four Types of Subtrochanteric Femoral Fracture.

OBJECTIVES: To compare the biomechanical performance of proximal femoral nail anti-rotation (PFNA), the "upside-down" less invasive plating system (LISS), and proximal femoral locking plate (PFLP) in fixing different fracture models of subtrochanteric fractures. METHODS: Thirty composite femurs were divided into three equal groups (PFNA, PFLP, and reverse LISS). The implant-femur constructs were tested under axial compression load (0-1400 N) from models I to IV, which represented the Seinsheimer type I subtrochanteric fracture, type IIIa subtrochanteric fracture with the posteromedial fragment reduced; type IIIa subtrochanteric fracture with the posteromedial fragment lost; and type IV subtrochanteric fracture, respectively. Axial stiffness was analyzed for each group. Each group was then divided into two subgroups, one of which underwent torsional and axial compression failure testing, while the other subgroup underwent axial compression fatigue testing. The torsional stiffness, failure load, and cycles to failure were analyzed. RESULTS: PFNA had the highest axial stiffness (F = 761.265, p < 0.0001) and failure load (F = 48.801, p < 0.0001) in model IV. The axial stiffness and failure load of the PFLP were significantly higher than those of the LISS (p < 0.0001, p = 0.001). However, no significant difference in axial stiffness was found between models I to III (model I: F = 2.439, p = 0.106; model II: F = 2.745, p = 0.082; model III: F = 0.852, p = 0.438) or torsional stiffness in model IV (F = 1.784, p = 0.187). In fatigue testing, PFNA did not suffer from construct failure after 90,000 cycles of axial compression. PFLP and LISS were damaged within 14,000 cycles, although LISS withstood more cycles than PFLP (t = 3.328, p = 0.01). CONCLUSION: The axial stiffness of the three implants was similar in models I to III. The biomechanical properties of PFNA were the best of the three implants in terms of axial stiffness, failure load, and fatigue testing cycles in model IV. The axial stiffness and failure load of the PFLP were better than those of the reverse LISS, but PFLP had fewer cycles in the fatigue tests than the reverse LISS.

Effects of the number and the position of transfixation pins in acrylic connecting bars.

Acrylic columns are commonly used in external skeletal fixators, especially for fracture management or trans-articular fixations. To the authors' knowledge, there are no studies demonstrating if the number or position of the transfixation pins influence the ultimate strength and stiffness of the acrylic column. The objective of this study was to evaluate the effects of the number and position of transfixation pins (concentric versus eccentric) on the strength and stiffness of acrylic columns placed in axial compression. We hypothesized that strength and stiffness of acrylic columns under axial compression would not be affected by the number or position of the transfixation pins through the column. Three different groups of 12 acrylic columns were constructed with 4, 6, and 8 pins. In each group, 6 columns were constructed with the pins placed concentrically and the remaining 6 columns with the pins placed eccentrically. Each column was then placed under axial compression using a biomechanical testing machine. No significant differences were observed in ultimate strength regarding the number or position of transfixation pins (P = 0.83 and P = 0.27, respectively). However, stiffness was significantly decreased for columns with 4 eccentric pins compared with columns with 6 and 8 eccentric pins (P < 0.01) and with columns with 4 concentric pins (P < 0.001). Although the effects of transfixation pins on the rigidity of acrylic columns do not appear to be clinically significant, these tests were performed only in compression and results might differ if complete external fixator systems are used with different models of testing. Future studies are recommended.

Les colonnes d'acrylique sont couramment utilisées dans les fixateurs externes, notamment pour la gestion des fractures ou les fixations transarticulaires. Selon les auteurs, aucune étude ne démontre si le nombre ou le positionnement des broches de transfixation influence la résistance ultime et la rigidité de la colonne d'acrylique. Les objectifs de cette étude étaient d'évaluer l'effet du nombre et du positionnement des broches de transfixation (concentriques versus excentriques) sur la résistance et la rigidité des colonnes d'acryliques placées en compression axiale. Nous avons émis l'hypothèse que la résistance et la rigidité des colonnes d'acryliques en compression axiale ne seraient pas affectées par le nombre ou le positionnement des broches de transfixation à travers la colonne. Trois groupes différents de douze colonnes acryliques ont été construits avec quatre, six, et huit broches. Dans chaque groupe, six colonnes ont été construites avec les broches placées concentriquement et les six colonnes restantes avec les broches placées de manière excentrique. Chaque colonne a ensuite été placée sous compression axiale à l'aide d'une machine de tests biomécaniques. Aucune différence significative n'a été observée pour la résistance ultime selon le nombre ou le positionnement des broches de transfixation (P = 0,83 et P = 0,27, respectivement). Cependant, la rigidité a été significativement diminuée pour les colonnes avec quatre broches excentriques par rapport aux colonnes avec six et huit broches excentriques (P < 0,01) et avec les colonnes avec quatre broches concentriques (P < 0,001). Bien que les effets des broches de transfixation sur la rigidité des colonnes acryliques ne semblent pas être cliniquement significatifs, ces tests ont été effectués uniquement en compression et les résultats pourraient différer si des systèmes complets de fixateurs externes sont utilisés avec différents modèles de test. De futures études sont recommandées.(Traduit par les auteurs).

Three-dimensional volume-rendered computed tomography application for follow-up fracture healing and volume measurements pre-surgical rib fixation and post-surgical rib fixation.

BACKGROUND: Surgical rib fixation (SRF) is being used increasingly in trauma centers for stabilization of chest wall injuries, in line with new and evolving surgical techniques. Our institution has developed a pathway for the management of chest wall injuries and SRF, which includes a follow-up low-volume, noncontrast computed tomography (CT) scan at 12 months. METHODS: This study was a single-center retrospective study conducted on 25 consecutive patients who underwent SRF between February 2019 and February 2020. All CT measurements were done by a CT radiographer under the supervision of a board-certified radiologist and included the use of three-dimensional volume-rendered images. RESULTS: There were no patients with SRF who experienced hardware failure at 12 months in either flail or nonflail groups. For fractured ribs treated with SRF, complete or partial union occurred in 75 of 76 ribs plated (98.7%). The median ratio for improvement in lung volumes was 1.71 for flail SRF and 1.69 for nonflail SRF in our study. CONCLUSION: Three-dimensional volume-rendered CT at 12 months post-SRF showed good alignment (no hardware failure) and fracture healing of fixed ribs in both flail and nonflail groups. Lung volumes also improved pre-SRF and post-SRF for both flail and nonflail patients. More studies are needed to define how the pattern of rib fracture healing of fixed and nonfixed ribs affects lung volumes. LEVEL OF EVIDENCE: Therapeutic, Level V.

Clinical observation and finite element analysis of cannulated screw internal fixation in the treatment of femoral neck fracture based on different reduction quality.

OBJECTIVE: Femoral neck fracture is one of the most common bone types. The effect of reduction quality on hip joint function and complications after screw internal fixation is not fully understood. To investigate the clinical efficacy and mechanical mechanism of positive buttress, anatomical reduction, and negative buttress in the treatment of femoral neck fracture after cannulated screw fixation. METHODS: Retrospective analysis of patients with femoral neck fracture treated with three cannulated screws internal fixation in our hospital from January 2013 to December 2018. According to the quality of fracture reduction, the patients were divided into positive buttress group, anatomical reduction group, and negative buttress group. Basic information such as injury mechanism, time from injury to surgery, Garden classification and Pauwels classification was collected, Harris scores were performed at 3 months, 6 months, and 12 months after surgery, and postoperative complications (femoral head necrosis, femoral neck shortening, and femoral neck nonunion) were collected. At the same time, three groups of finite element models with different reduction quality were established for stress analysis, their stress clouds were observed and the average displacement and stress of the three groups of models were compared. P < 0.05 was used to represent a statistically significant difference. RESULTS: A total of 225 cases of unilateral femoral neck fractures were included and followed up for an average of 4.12 ± 0.69 years. There was no significant difference in age, gender, side, injury mechanism, time from injury to surgery, BMI, Garden classification, Pauwels classification, and follow-up time among the three groups (P > 0.05). However, there was significant difference in Harris score at 6 and 12 months after operation among the three groups (P < 0.05), which was higher in the positive buttress group and anatomical reduction group than in the negative buttress group. In addition, the incidence of osteonecrosis of the femoral head in the negative buttress group (32.2%) was greater than that in the anatomical reduction group (13.4%) and the positive buttress group (5.4%) (P < 0.05). In addition, the incidence of femoral neck nonunion and femoral neck shortening in the negative buttress group was also higher than that in the anatomical reduction positive buttress group (P < 0.05). The finite element results showed that the stress and fracture end displacement in the negative buttress group were greater than those in the positive buttress group (P < 0.05). CONCLUSION: Both positive buttress and anatomical reduction in the treatment of femoral neck fracture with cannulated screw internal fixation can obtain better clinical effect and lower postoperative complications. Positive brace support and anatomic reduction can limit the restoration of femoral stress conduction. Therefore, it is not necessary to pursue anatomical reduction too deliberately during surgery, while negative buttress reduction should be avoided.

Pelvic fracture-related hypotension: A review of contemporary adjuncts for hemorrhage control.

ABSTRACT: Major pelvic hemorrhage remains a considerable challenge of modern trauma care associated with mortality in over a third of patients. Efforts to improve outcomes demand continued research into the optimal employment of both traditional and newer hemostatic adjuncts across the full spectrum of emergent care environments. The purpose of this review is to provide a concise description of the rationale for and effective use of currently available adjuncts for the control of pelvic hemorrhage. In addition, the challenges of defining the optimal order and algorithm for employment of these adjuncts will be outlined. LEVEL OF EVIDENCE: Review, level IV.

Effectiveness in the Treatment of Intertrochanteric Fracture in Geriatric Patients by A Novel Prototype Carbon Composite External Fixator.

BACKGROUND: Intertrochanteric fracture is a common injury in seniors. Senior patients taking surgical interventions suffer from prolonged bed-rest complications such as pressure ulcer, thromboembolism, or pneumonia, which may lead to high mortality rate. A treatment using external fixators is, therefore, recommendable, and has shown satisfactory outcomes such as early weight-bearing, short hospitalization time and quick union time. Fracture treatments in Vietnam mainly use metal and imported fixation, raising concerns of compatibility and financial issues from patients. OBJECTIVE: This study investigated the in vivo effectiveness in treating an intertrochanteric fracture in Vietnamese geriatric patients by a novel prototype carbon composite external fixator (whose shaft screws near the fracture site) and an available stainless steel external fixator (shaft screw far from the fracture site) already used in Vietnam. METHODS: Fifty-five patients treated with the metal fixator and 54 patients treated with the composite fixator - all aged 60 - 99 - were monitored for treatment results until one year after surgery. RESULTS: The results demonstrated the external fixator's effectiveness, especially the composite prototype, which minimized blood loss, shortened operation time, reduced pain, and provided stable fixation that promoted proper bone union. CONCLUSION: The novel composite fixator prototype in this study was also superior to the current metal fixator in many aspects. Proper application of this method could prove its effectiveness in the surgical cure for fracture in older people. It should be a viable choice for intertrochanteric fracture treatment for senile people in Vietnam.

Evaluating the results of long tubular bone distraction with an advanced rod monolateral external fixator for achondroplasia.

The work aimed to evaluate the effectiveness of the developed distraction system based on the rod external monolateral fixation mechanisms by comparing it with the classical technique of long tubular bones distraction based on the circular multi-axial system. The study included patients with a genetically confirmed diagnosis of achondroplasia. The experimental group consisted of 14 patients who underwent surgical limb lengthening by the rod monolateral external fixator with a distraction system developed by the authors. The lengthening was performed on 28 segments of tubular bones. The majority of the experimental group patients achieved the lengthening value close to the planned one and the deformation correction. The fixation period was averagely 83.8 ± 3.7 days, the regenerate length was 8.5 ± 0.6 cm, and the mechanical strength of the distraction regenerate was 10.3° ± 2.18°. The rod external fixator with a control distraction system developed by the authors has small dimensions and low weight of the external supporting elements of high durability. It is reported to provide a good psychological tolerance of the treatment process and significantly outperforms the circular multi-axis system. Considering the aforementioned, the proposed apparatus can grant good orthopedic care to patients with achondroplasia.

Lateral entry pins and Slongo's external fixation: which method is more ideal for older children with supracondylar humeral fractures?

OBJECTIVE: The standard surgical treatment for supracondylar humeral fractures in children is closed reduction and percutaneous pinning. Given the need for greater fixation strength and higher risk of joint stiffness for children older than 8 years, external fixation is often performed for treating supracondylar humeral fractures in older children. The aim of this study was to compare the efficacy of lateral entry pins and Slongo's external fixation for treating supracondylar humeral fractures in older children. METHODS: Children older than 8 years who underwent surgery for supracondylar humeral fractures at our hospital for surgery from January 2016 to December 2020 are to be retrospectively assessed. One group (n = 36) underwent internal fixation and percutaneous pinning with three lateral Kirschner wires, and the other group (n = 32) underwent Slongo's external fixator surgery. The demographic data, operation duration, number of fluoroscopies, and fracture healing time were compared between both groups. The elbow joint function was evaluated 6 months after the surgery on the basis of fracture healing time, lifting angle, elbow joint range of motion (ROM), and Flynn score. The incidence of postoperative complications was also recorded. RESULTS: There was no significant difference between the two patient groups in terms of the demographic parameters. Compared to external fixation surgery, Kirschner wire surgery required shorter duration and fewer fluoroscopies (P < 0.05). Nevertheless, the fracture healing time was significantly less (P < 0.05), and the elbow ROM and Flynn scores were higher in the external fixator group compared to the Kirschner wire fixation group (P < 0.05). There was one case of secondary fracture displacement in the Kirschner wire group and one of pin tract infection in the external fixator group. No other iatrogenic injuries or complications were observed. CONCLUSION: Maybe Slongo's external fixator is a suitable alternative treatment option for supracondylar humeral fractures in children older than 8 years since it can achieve better fixation strength and early restoration of elbow joint movement with a lower risk of joint stiffness.

Treatment of posterolateral tibial plateau fractures with a rotational support plate and special pressurizer: technical note and retrospective case series.

BACKGROUND: In tibial plateau fractures, the posterolateral segment of the tibia plateau is frequently affected and challenging to treat. Although there are many surgical approaches and fixation methods for the treatment of these fractures, all of these methods have limitations. We designed a new rotational support plate (RSP) and a special pressurizer that can fix the fracture directly via the anterolateral approach. This method is advantageous because it leads to little trauma, involves a simple operation, and has a reliable fixation effect. This study details the technique of treating these fractures with the RSP and special pressurizer and provides the outcomes. METHODS: From May 2016 to January 2019, the data of 12 patients with posterolateral tibial plateau fractures treated with the RSP and special pressurizer in our hospital were retrospectively analyzed. Postoperative rehabilitation was advised, knee X-rays were taken at follow-ups, and fracture healing, complications, and knee range of motion were assessed. The Hospital for Special Surgery (HSS) knee score and Knee Injury and Osteoarthritis Outcome Score (KOOS) were used to evaluate knee function at the last follow-up. RESULTS: The average follow-up time of all patients was 16.5 months (range, 12-25 months). The average bony union time was 3.2 months (range, 3-4.5 months). At the last follow-up, the average knee range of motion was 138° (range, 107-145°). The average HSS score was 91 (range, 64-98). The average KOOS Symptoms score was 90 (range, 75-96). The average KOOS Pain score was 91 (range, 72-97). The average KOOS ADL score was 91 (range, 74-97). The average KOOS sport/recreation score was 83 (range, 70-90). The average KOOS QOL score was 88 (range, 69-93). Skin necrosis, incision infections, and fixation failure did not occur during the follow-up period. CONCLUSIONS: With our newly designed RSP and special pressurizer, posterolateral tibial plateau fractures can be easily and effectively reduced and fixed through the anterolateral approach, which serves as a novel treatment for posterolateral tibial plateau fractures.

Proximal Humerus Fractures: What Alignment is Acceptable in Children 10 and Up?

BACKGROUND: Fractures of the proximal humerus in skeletally immature patients are rare, and even rarer still in individuals approaching skeletal maturity. Concepts regarding remodeling potential, amount of deformity and functional demands can guide our treatment decision making, but criteria are poorly defined. The purpose of this manuscript is to discuss the issues and the best available evidence. METHODS: A search of the English literature was carried out using PubMed to identify papers on the topic of proximal humerus fractures in skeletally immature individuals. RESULTS: The literature available on the topic of pediatric proximal humerus fractures is limited, especially regarding fractures in patients approaching skeletal maturity. Certainly, as the remodeling potential decreases and the amount of deformity and functional demand increase, the need for operative treatment increases. The exact tolerances and criteria have not been established. A variety of surgical techniques exist, and have been shown to be helpful. CONCLUSIONS: Operative treatment may be necessary in individuals approaching skeletal maturity. Concepts discussed in this paper regarding remodeling, amount of deformity and functional demand may help the surgeon to make appropriate treatment decisions. Future prospective comparative studies which are pending will hopefully shed further light on this matter.

A report of a novel approach for the management of paediatric mandibular fracture using a prefabricated adaptable surgical splint.

Paediatric facial fractures are relatively rare. The inherent elasticity of the bones with more of the cartilage than that of the mineralised bone accounts for this. The principles involved in the management of facial fractures are the same irrespective of the age of the patient; however, in children, the techniques used are necessarily modified by certain anatomical, physiological, psychological and feeding factors related to childhood and the parents. In an attempt to keep the treatment and fixation technique simple, the case, presented here, describes the management of a mandibular parasymphyseal fracture in a 16-month-old child with the use of a prefabricated adaptable surgical splint.