RESUMEN
The COVID-19 pandemic has demonstrated the real need for mechanisms to control the spread of airborne respiratory pathogens. Thus, preventing the spread of disease from pathogens has come to the forefront of the public consciousness. This has brought an increasing demand for novel technologies to prioritise clean air. In this study we report on the efficacy of novel biocide treated filters and their antimicrobial activity against bacteria, fungi and viruses. The antimicrobial filters reported here are shown to kill pathogens, such as Candida albicans, Escherichia coli and MRSA in under 15 min and to destroy SARS-CoV-2 viral particles in under 30 s following contact with the filter. Through air flow rate testing, light microscopy and SEM, the filters are shown to maintain their structure and filtration function. Further to this, the filters are shown to be extremely durable and to maintain antimicrobial activity throughout the operational lifetime of the product. Lastly, the filters have been tested in field trials onboard the UK rail network, showing excellent efficacy in reducing the burden of microbial species colonising the air conditioning system.
Asunto(s)
Filtros de Aire/microbiología , Antiinfecciosos/química , Antivirales/química , Filtros de Aire/virología , Antiinfecciosos/farmacología , Antivirales/farmacología , COVID-19/epidemiología , COVID-19/virología , Candida albicans/efectos de los fármacos , Clorhexidina/análogos & derivados , Clorhexidina/química , Clorhexidina/farmacología , Escherichia coli/efectos de los fármacos , Humanos , Staphylococcus aureus Resistente a Meticilina/efectos de los fármacos , SARS-CoV-2/efectos de los fármacos , Factores de TiempoRESUMEN
Environmental air sampling of the SARS-CoV-2 virus in occupational and community settings is pertinent to reduce and monitor the spread of the COVID pandemic. However, there is a general lack of standardized procedures for airborne virus sampling and limited knowledge of how sampling and storage stress impact the recovery of captured airborne viruses. Since filtration is one of the commonly used methods to capture airborne viruses, this study analyzed the effect of sampling and storage stress on SARS-CoV-2 surrogate virus (human coronavirus OC43, or HCoV-OC43) captured by filters. HCoV-OC43, a simulant of the SARS-CoV-2, was aerosolized and captured by PTFE-laminated filters. The impact of sampling stress was evaluated by comparing the RNA yields recovered when sampled at 3 L/min and 10 L/min and for 10 min and 60 min; in one set of experiments, additional stress was added by passing clean air through filters with the virus for 1, 5, and 15 hr. The impact of storage stress was designed to examine RNA recovery from filters at room temperature (25 °C) and refrigerated conditions (4 °C) for up to 1 week of storage. To our knowledge, this is the first report on using HCoV-OC43 aerosol in air sampling experiments, and the mode diameter of the virus aerosolized from the growth medium was 40-60 nm as determined by SMPS + CPC system (TSI Inc.) and MiniWRAS (Grimm Inc.) measurements. No significant difference was found in virus recovery between the two sampling flow rates and different sampling times (p > 0.05). However, storage at room temperature (25 °C) yielded â¼2x less RNA than immediate processing and storage at refrigerated conditions (4 °C). Therefore, it is recommended to store filter samples with viruses at 4 °C up to 1 week if the immediate analysis is not feasible. Although the laminated PTFE filter used in this work purposefully does not include a non-PTFE backing, the general recommendations for handling and storing filter samples with viral particles are likely to apply to other filter types.
Asunto(s)
Filtros de Aire/virología , COVID-19/epidemiología , Coronavirus Humano OC43/aislamiento & purificación , Manejo de Especímenes/métodos , Manejo de Especímenes/normas , Monitoreo del Ambiente , Humanos , Pandemias , SARS-CoV-2 , Temperatura , Factores de TiempoRESUMEN
Air-transmitted pathogens may cause severe epidemics showing huge threats to public health. Microbial inactivation in the air is essential, whereas the feasibility of existing air disinfection technologies meets challenges including only achieving physical separation but no inactivation, obvious pressure drops, and energy intensiveness. Here we report a rapid disinfection method toward air-transmitted bacteria and viruses using the nanowire-enhanced localized electric field to damage the outer structures of microbes. This air disinfection system is driven by a triboelectric nanogenerator that converts mechanical vibration to electricity effectively and achieves self-powered. Assisted by a rational design for the accelerated charging and trapping of microbes, this air disinfection system promotes microbial transport and achieves high performance: >99.99% microbial inactivation within 0.025 s in a fast airflow (2 m/s) while only causing low pressure drops (<24 Pa). This rapid, self-powered air disinfection method may fill the urgent need for air-transmitted microbial inactivation to protect public health.
Asunto(s)
Filtros de Aire , Desinfección/instrumentación , Desinfección/métodos , Diseño de Equipo/métodos , Viabilidad Microbiana , Nanocables/química , Filtros de Aire/microbiología , Filtros de Aire/virología , Bacterias/ultraestructura , Electricidad , Electrodos , Microscopía Electrónica de Rastreo , Microscopía Electrónica de Transmisión , Especies Reactivas de Oxígeno/metabolismo , Vibración , Virus/ultraestructuraRESUMEN
The severe outbreak of respiratory coronavirus disease 2019 has increased the significant demand of respiratory mask and its use become ubiquitous worldwide to control this unprecedented respiratory pandemic. The performance of a respiratory mask depends on the efficiency of the filter layer which is mostly made of polypropylene melt blown non-woven (PP-MB-NW). So far, very limited characterization data are available for the PPE-MB-NW in terms to achieve desired particulate filtration efficiency (PFE) against 0.3 µm size, which are imperative in order to facilitate the right selection of PP-MB-NW fabric for the development of mask. In present study, eight different kinds of PP-MB-NW fabrics (Sample A-H) of varied structural morphology are chosen. The different PP-MB-NW were characterized for its pore size and distribution by mercury porosimeter and BET surface area analyzer was explored first time to understand the importance of blind pore in PFE. The PP-MB-NW samples were characterized using scanning electron microscopy so as to know the surface morphology. The filtration efficiency, pressure drop and breathing resistance of various PP-MB-NW fabric samples are investigated in single and double layers combination against the particle size of 0.3, 0.5 and 1 µm. The samples which are having low pore dia, high solid fraction volume, and low air permeability has high filtration efficiency (> 90%) against 0.3 µm particle with high pressure drop (16.3-21.3 mm WC) and breathing resistance (1.42-1.92 mbar) when compared to rest of the samples. This study will pave the way for the judicial selection of right kind of filter layer i.e., PP-MB-NW fabric for the development of mask and it will be greatly helpful in manufacturing of mask in this present pandemic with desired PFE indicating considerable promise for defense against respiratory pandemic.
Asunto(s)
Filtros de Aire , COVID-19/prevención & control , Máscaras , Aerosoles/aislamiento & purificación , Filtros de Aire/virología , Diseño de Equipo , Humanos , Máscaras/virología , Tamaño de la Partícula , Polipropilenos/química , SARS-CoV-2/aislamiento & purificación , Textiles/virologíaRESUMEN
Respiratory infections, including SARS-CoV-2, are spread via inhalation or ingestion of airborne pathogens. Airborne transmission is difficult to control, particularly indoors. Manufacturers of high efficiency particulate air (HEPA) filters claim they remove almost all small particles including airborne bacteria and viruses. This study investigates whether modern portable, commercially available air filters reduce the incidence of respiratory infections and/or remove bacteria and viruses from indoor air. We systematically searched Medline, Embase and Cochrane for studies published between January 2000 and September 2020. Studies were eligible for inclusion if they included a portable, commercially available air filter in any indoor setting including care homes, schools or healthcare settings, investigating either associations with incidence of respiratory infections or removal and/or capture of aerosolised bacteria and viruses from the air within the filters. Dual data screening and extraction with narrative synthesis. No studies were found investigating the effects of air filters on the incidence of respiratory infections. Two studies investigated bacterial capture within filters and bacterial load in indoor air. One reported higher numbers of viable bacteria in the HEPA filter than in floor dust samples. The other reported HEPA filtration combined with ultraviolet light reduced bacterial load in the air by 41% (sampling time not reported). Neither paper investigated effects on viruses. There is an important absence of evidence regarding the effectiveness of a potentially cost-efficient intervention for indoor transmission of respiratory infections, including SARS-CoV-2. Two studies provide 'proof of principle' that air filters can capture airborne bacteria in an indoor setting. Randomised controlled trials are urgently needed to investigate effects of portable HEPA filters on incidence of respiratory infections.
Asunto(s)
Filtros de Aire , Contaminación del Aire Interior/prevención & control , COVID-19/prevención & control , Infecciones del Sistema Respiratorio/prevención & control , SARS-CoV-2/aislamiento & purificación , Filtros de Aire/microbiología , Filtros de Aire/virología , Bacterias/aislamiento & purificación , Control de Enfermedades Transmisibles/métodos , Vivienda , Humanos , Virus/aislamiento & purificación , Lugar de TrabajoRESUMEN
Influenza, one of the most contagious and infectious diseases, is predominantly transmitted through aerosols, leading to the development of filter-based protective equipment. Though the currently available filters are effective at removing submicron-sized particulates, filter materials with enhanced virus-capture efficiency are still in demand. Coating or chemically modifying filters with molecules capable of binding influenza viruses has received attention as a promising approach for the production of virus-capturing filters. For this purpose, tannic acid (TA), a plant-derived polyphenol, is a promising molecule for filter functionalization because of its antiviral activities and ability to serve as a cost-efficient adhesive for various materials. This study demonstrates the facile preparation of TA-functionalized high-efficiency particulate air (HEPA) filter materials and their efficiency in influenza virus capture. Polypropylene HEPA filter fabrics were coated with TA via a dipping/washing process. The TA-functionalized HEPA filter (TA-HF) exhibits a high in-solution virus capture efficiency of up to 2,723 pfu/mm2 within 10 min, which is almost two orders of magnitude higher than that of non-functionalized filters. This result suggests that the TA-HF is a potent anti-influenza filter that can be used in protective equipment to prevent the spread of pathogenic viruses.
Asunto(s)
Filtros de Aire/virología , Filtración/instrumentación , Orthomyxoviridae/química , Taninos/química , Aerosoles/química , Polvo/prevención & control , Filtración/métodos , Tamaño de la Partícula , Textiles/virologíaAsunto(s)
Filtros de Aire/virología , Contaminación de Equipos , Intubación Intratraqueal/efectos adversos , Máscaras/virología , SARS-CoV-2 , Filtros de Aire/efectos adversos , COVID-19/prevención & control , COVID-19/transmisión , Humanos , Intubación Intratraqueal/instrumentación , Máscaras/efectos adversosRESUMEN
OBJECTIVE: To establish reuse process of positive pressure powered air-filter protective hoods during coronavirus disease 2019 (COVID-19) epidemic. METHODS: The procedure of pretreatment, storage, recovery, cleaning, disinfection and sterilization process of positive pressure powered air-filter protective hoods, which were used in the treatment of COVID-19 infection patients was established in Central Sterile Supply Department of the hospital. The cleaning and disinfection effects of the protective hoods after treatment were examined by magnifying glass method, residual protein detection method, real-time PCR, and agar pour plate method. RESULTS: Twenty five used protective hoods underwent totally 135 times of washing, disinfecting and sterilizing procedures. After washing, all the protein residue tests and COVID-19 nucleic acid tests showed negative results. After sterilizing, all the protective hoods met sterility requirement. All the tested protective hoods were undamaged after reprocessing. CONCLUSIONS: The established reuse procedures for used positive pressure powered air-filter protective hoods are safe.
Asunto(s)
Filtros de Aire , Infecciones por Coronavirus , Desinfección , Equipo Reutilizado , Pandemias , Neumonía Viral , Esterilización , Filtros de Aire/normas , Filtros de Aire/virología , Betacoronavirus , COVID-19 , Infecciones por Coronavirus/prevención & control , Desinfección/normas , Equipo Reutilizado/normas , Pandemias/prevención & control , Neumonía Viral/prevención & control , SARS-CoV-2 , Esterilización/normasRESUMEN
Several lines of evidence suggest the role of air-conditioning systems in the transmission of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). Furthermore, the likelihood of novel coronavirus to take refuge inside a microbial Trojan horse, that is, Acanthamoeba, can further enhance possibility of SARS-CoV-2 transmission in the environment. Here we propose the use of various disinfection strategies that can be employed using filters with antimicrobial fabricated surfaces or using UV irradiation to achieve germicidal properties for removal of pathogenic microbes such as SARS-CoV-2 and amoebae in the ventilation systems.
Asunto(s)
Aire Acondicionado/métodos , Filtros de Aire/virología , Contaminación del Aire Interior/prevención & control , Infecciones por Coronavirus/prevención & control , Infecciones por Coronavirus/transmisión , Pandemias/prevención & control , Neumonía Viral/prevención & control , Neumonía Viral/transmisión , Betacoronavirus/patogenicidad , COVID-19 , Desinfección/métodos , Humanos , SARS-CoV-2RESUMEN
We present evidence-based design principles for three different UV-C based decontamination systems for N95 filtering facepiece respirators (FFRs) within the context of the SARS-CoV-2 outbreak of 2019-2020. The approaches used here were created with consideration for the needs of low- and middle-income countries (LMICs) and other under-resourced facilities. As such, a particular emphasis is placed on providing cost-effective solutions that can be implemented in short order using generally available components and subsystems. We discuss three optical designs for decontamination chambers, describe experiments verifying design parameters, validate the efficacy of the decontamination for two commonly used N95 FFRs (3M, #1860 and Gerson #1730), and run mechanical and filtration tests that support FFR reuse for at least five decontamination cycles.
Asunto(s)
Filtros de Aire , Descontaminación/instrumentación , Diseño de Equipo/métodos , Máscaras , Rayos Ultravioleta , Filtros de Aire/microbiología , Filtros de Aire/virología , Equipo Reutilizado , Humedad , Ozono/síntesis química , Ozono/toxicidad , Temperatura , Rayos Ultravioleta/efectos adversosRESUMEN
Air filtration in various implementations has become a critical intervention in managing the spread of coronavirus disease 2019 (COVID-19). However, the proper deployment of air filtration has been hampered by an insufficient understanding of its principles. These misconceptions have led to uncertainty about the effectiveness of air filtration at arresting potentially infectious aerosol particles. A correct understanding of how air filtration works is critical for further decision-making regarding its use in managing the spread of COVID-19. The issue is significant because recent evidence has shown that severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) can remain airborne longer and travel farther than anticipated earlier in the COVID-19 pandemic, albeit with diminishing concentrations and viability. While SARS-CoV-2 virions are around 60-140 nm in diameter, larger respiratory droplets and air pollution particles (>1 µm) have been found to harbor the virions. Removing particles that could carry SARS-CoV-2 from the air is possible using air filtration, which relies on the natural or mechanical movement of air. Among various types of air filters, high-efficiency particle arrestance (HEPA) filters have been recommended. Other types of filters are less or more effective and, correspondingly, are easier or harder to move air through. The use of masks, respirators, air filtration modules, and other dedicated equipment is an essential intervention in the management of COVID-19 spread. It is critical to consider the mechanisms of air filtration and to understand how aerosol particles containing SARS-CoV-2 virions interact with filter materials to determine the best practices for the use of air filtration to reduce the spread of COVID-19.
Asunto(s)
Filtros de Aire/virología , Betacoronavirus , Infecciones por Coronavirus/prevención & control , Pandemias/prevención & control , Neumonía Viral/prevención & control , Aerosoles , COVID-19 , Infecciones por Coronavirus/epidemiología , Humanos , Neumonía Viral/epidemiología , SARS-CoV-2RESUMEN
The potential for spread of COVID-19 infections in skilled nursing facilities and other long-term care sites poses new challenges for nursing home administrators to protect patients and staff. It is anticipated that as acute care hospitals reach capacity, nursing homes may retain COVID-19 infected residents longer prior to transferring to an acute care hospital. This article outlines 5 pragmatic steps that long-term care facilities can take to manage airflow within resident rooms to reduce the potential for spread of infectious airborne droplets into surrounding areas, including hallways and adjacent rooms, using strategies adapted from negative-pressure isolation rooms in acute care facilities.
Asunto(s)
Microbiología del Aire , Movimientos del Aire , Infecciones por Coronavirus/prevención & control , Transmisión Vertical de Enfermedad Infecciosa/prevención & control , Cuidados a Largo Plazo/organización & administración , Pandemias/prevención & control , Neumonía Viral/prevención & control , Instituciones de Cuidados Especializados de Enfermería/organización & administración , Anciano , Filtros de Aire/virología , Contaminantes Atmosféricos/efectos adversos , Contaminantes Atmosféricos/análisis , Contaminación del Aire Interior , COVID-19 , Infecciones por Coronavirus/epidemiología , Femenino , Humanos , Control de Infecciones/métodos , Masculino , Casas de Salud/organización & administración , Pandemias/estadística & datos numéricos , Neumonía Viral/epidemiología , Control de Calidad , Medición de RiesgoRESUMEN
OBJECTIVE@#To establish reuse process of positive pressure powered air-filter protective hoods during coronavirus disease 2019 (COVID-19) epidemic.@*METHODS@#The procedure of pretreatment, storage, recovery, cleaning, disinfection and sterilization process of positive pressure powered air-filter protective hoods, which were used in the treatment of COVID-19 infection patients was established in Central Sterile Supply Department of the hospital. The cleaning and disinfection effects of the protective hoods after treatment were examined by magnifying glass method, residual protein detection method, real-time PCR, and agar pour plate method.@*RESULTS@#Twenty five used protective hoods underwent totally 135 times of washing, disinfecting and sterilizing procedures. After washing, all the protein residue tests and COVID-19 nucleic acid tests showed negative results. After sterilizing, all the protective hoods met sterility requirement. All the tested protective hoods were undamaged after reprocessing.@*CONCLUSIONS@#The established reuse procedures for used positive pressure powered air-filter protective hoods are safe.
Asunto(s)
Filtros de Aire/virología , Betacoronavirus , COVID-19 , Infecciones por Coronavirus/prevención & control , Desinfección/normas , Equipo Reutilizado/normas , Pandemias/prevención & control , Neumonía Viral/prevención & control , SARS-CoV-2 , Esterilización/normasRESUMEN
Biosecurity is defined as the implementation of measures that reduce the risk of disease agents being introduced and/or spread. For pig production, several of these measures are routinely implemented (e.g. cleaning, disinfection, segregation). However, air as a potential vector of pathogens has long been disregarded. Filters for incoming and recirculating air were installed into an already existing ventilation plant at a fattening piggery (3,840 pigs at maximum) in Saxony, Germany. Over a period of three consecutive fattening periods, we evaluated various parameters including air quality indices, environmental and operating parameters, and pig performance. Animal data regarding respiratory diseases, presence of antibodies against influenza A viruses, PRRSV, and Actinobacillus pleuropneumoniae and lung health score at slaughter were recorded, additionally. There were no significant differences (p = 0.824) in total bacterial counts between barns with and without air filtration. Recirculating air filtration resulted in the lowest total dust concentration (0.12 mg/m3) and lung health was best in animals from the barn equipped with recirculating air filtration modules. However, there was no difference in animal performance. Antibodies against all above mentioned pathogens were detected but mostly animals were already antibody-positive at re-stocking. We demonstrated that supply air filtration as well as recirculating air filtration technique can easily be implemented in an already existing ventilation system and that recirculating air filtration resulted in enhanced lung health compared to supply air-filtered and non-filtered barns. A more prominent effect might have been obtained in a breeding facility because of the longer life span of sows and a higher biosecurity level with air filtration as an add-on measure.
Asunto(s)
Adiposidad , Filtros de Aire , Contaminación del Aire , Crianza de Animales Domésticos/métodos , Porcinos/metabolismo , Ventilación/métodos , Adiposidad/fisiología , Filtros de Aire/veterinaria , Filtros de Aire/virología , Microbiología del Aire , Contaminación del Aire Interior/análisis , Bienestar del Animal/normas , Animales , Animales Domésticos , Comercio , Ambiente Controlado , Granjas , Filtración/métodos , Filtración/veterinaria , Porcinos/microbiología , Porcinos/virología , Ventilación/instrumentaciónRESUMEN
One of the most important topics that occupy public health problems is the air quality. That is the reason why mechanical ventilation and air handling units (AHU) were imposed by the different governments in the collective or individual buildings. Many buildings create an artificial climate using heating, ventilation, and air-conditioning systems. Among the existing aerosols in the indoor air, we can distinguish the bioaerosol with biological nature such as bacteria, viruses, and fungi. Respiratory viral infections are a major public health issue because they are usually highly infective. We spend about 90% of our time in closed environments such as homes, workplaces, or transport. Some studies have shown that AHU contribute to the spread and transport of viral particles within buildings. The aim of this work is to study the characterization of viral bioaerosols in indoor environments and to understand the fate of mengovirus eukaryote RNA virus on glass fiber filter F7 used in AHU. In this study, a set-up close to reality of AHU system was used. The mengovirus aerosolized was characterized and measured with the electrical low pressure impact and the scanner mobility particle size and detected with RT-qPCR. The results about quantification and the level of infectivity of mengovirus on the filter and in the biosampler showed that mengovirus can pass through the filter and remain infectious upstream and downstream the system. Regarding the virus infectivity on the filter under a constant air flow, mengovirus was remained infectious during 10 h after aerosolization.
Asunto(s)
Filtros de Aire/virología , Filtración/instrumentación , Mengovirus/aislamiento & purificación , Ventilación/instrumentación , Aerosoles/química , Aire , Microbiología del Aire , Vidrio/análisis , Mengovirus/clasificación , Mengovirus/genéticaRESUMEN
One limitation to housing rodents in individually ventilated cages (IVCs) is the ineffectiveness of traditional health monitoring programs that test soiled bedding sentinels every quarter. Aerogen transmission does not occur with this method. Moreover, the transmission of numerous pathogens in bedding is uncertain, and sentinel susceptibility to various pathogens varies. A novel method using particle collection from samples of exhaust air was developed in this study which was also systematically compared with routine health monitoring using soiled bedding sentinels. We used our method to screen these samples for the presence of murine norovirus (MNV), a mouse pathogen highly prevalent in laboratory animal facilities. Exhaust air particles from prefilters of IVC racks with known MNV prevalence were tested by quantitative reverse transcription polymerase chain reaction (RT-qPCR). MNV was detected in exhaust air as early as one week with one MNV-positive cage per rack, while sentinels discharged MNV RNA without seroconverting. MNV was reliably and repeatedly detected in particles collected from samples of exhaust air in all seven of the three-month sampling rounds, with increasing MNV prevalence, while sentinels only seroconverted in one round. Under field conditions, routine soiled bedding sentinel health monitoring in our animal facility failed to identify 67% ( n = 85) of positive samples by RT-qPCR of exhaust air particles. Thus, this method proved to be highly sensitive and superior to soiled bedding sentinels in the reliable detection of MNV. These results represent a major breakthrough in hygiene monitoring of rodent IVC systems and contribute to the 3R principles by reducing the number of animals used and by improving experimental conditions.
Asunto(s)
Filtros de Aire/veterinaria , Ropa de Cama y Ropa Blanca/veterinaria , Norovirus/aislamiento & purificación , Enfermedades de los Roedores/virología , Filtros de Aire/virología , Animales , Ropa de Cama y Ropa Blanca/virología , Vivienda para Animales , Ratones , Enfermedades de los Roedores/diagnósticoRESUMEN
Containment level 4 (CL4) laboratories studying biosafety level 4 viruses are under strict regulations to conduct nonhuman primate (NHP) studies in compliance of both animal welfare and biosafety requirements. NHPs housed in open-barred cages raise concerns about cross-contamination between animals, and accidental exposure of personnel to infectious materials. To address these concerns, two NHP experiments were performed. One examined the simultaneous infection of 6 groups of NHPs with 6 different viruses (Machupo, Junin, Rift Valley Fever, Crimean-Congo Hemorrhagic Fever, Nipah and Hendra viruses). Washing personnel between handling each NHP group, floor to ceiling biobubble with HEPA filter, and plexiglass between cages were employed for partial primary containment. The second experiment employed no primary containment around open barred cages with Ebola virus infected NHPs 0.3 meters from naïve NHPs. Viral antigen-specific ELISAs, qRT-PCR and TCID50 infectious assays were utilized to determine antibody levels and viral loads. No transmission of virus to neighbouring NHPs was observed suggesting limited containment protocols are sufficient for multi-viral CL4 experiments within one room. The results support the concept that Ebola virus infection is self-contained in NHPs infected intramuscularly, at least in the present experimental conditions, and is not transmitted to naïve NHPs via an airborne route.
Asunto(s)
Contención de Riesgos Biológicos/normas , Fiebres Hemorrágicas Virales/transmisión , Laboratorios/normas , Filtros de Aire/virología , Animales , Antígenos Virales/análisis , Arenavirus/fisiología , Bunyaviridae/fisiología , Ebolavirus/fisiología , Ensayo de Inmunoadsorción Enzimática , Contaminación de Equipos , Fiebres Hemorrágicas Virales/virología , Henipavirus/fisiología , Microburbujas/virología , ARN Viral/análisis , Reacción en Cadena en Tiempo Real de la Polimerasa , Riesgo , Carga Viral , Replicación ViralRESUMEN
Knowledge on African Swine Fever (ASF) transmission routes can be useful when designing control measures against the spread of ASF virus (ASFV). Few studies have focused on the airborne transmission route, and until now no data has been available on quantities of ASF virus (ASFV) in the air. Our aim was to validate an air sampling technique for ASF virus (ASFV) that could be used to detect and quantify virus excreted in the air after experimental infection of pigs. In an animal experiment with the Brazil'78, the Malta'78 and Netherlands'86 isolates, air samples were collected at several time points. For validation of the air sampling technique, ASFV was aerosolised in an isolator, and air samples were obtained using the MD8 air scan device, which was shown to be suitable to detect ASFV. The half-life of ASFV in the air was on average 19 min when analysed by PCR, and on average 14 min when analysed by virus titration. In rooms with infected pigs, viral DNA with titres up to 10(3.2) median tissue culture infective dose equivalents (TCID50eq.)/m(3) could be detected in air samples from day 4 post-inoculation (dpi 4) until the end of the experiments, at dpi 70. In conclusion, this study shows that pigs infected with ASFV will excrete virus in the air, particularly during acute disease. This study provides the first available parameters to model airborne transmission of ASFV.
Asunto(s)
Virus de la Fiebre Porcina Africana/fisiología , Fiebre Porcina Africana/virología , Microbiología del Aire , Virología/métodos , Fiebre Porcina Africana/prevención & control , Fiebre Porcina Africana/transmisión , Virus de la Fiebre Porcina Africana/genética , Virus de la Fiebre Porcina Africana/aislamiento & purificación , Filtros de Aire/virología , Animales , ADN Viral/genética , Heces/virología , Semivida , Reproducibilidad de los Resultados , Porcinos , Tiempo , Carga ViralRESUMEN
Although respirators and filters are designed to prevent the spread of pathogenic aerosols, a stockpile shortage is anticipated during the next flu pandemic. Contact transfer and reaerosolization of collected microbes from used respirators are also a concern. An option to address these potential problems is UV irradiation, which inactivates microbes by dimerizing thymine/uracil in nucleic acids. The objective of this study was to determine the effects of transmission mode and environmental conditions on decontamination efficiency by UV. In this study, filters were contaminated by different transmission pathways (droplet and aerosol) using three spraying media (deionized water [DI], beef extract [BE], and artificial saliva [AS]) under different humidity levels (30% [low relative humidity {LRH}], 60% [MRH], and 90% [HRH]). UV irradiation at constant intensity was applied for two time intervals at each relative humidity condition. The highest inactivation efficiency (IE), around 5.8 logs, was seen for DI aerosols containing MS2 on filters at LRH after applying a UV intensity of 1.0 mW/cm(2) for 30 min. The IE of droplets containing MS2 was lower than that of aerosols containing MS2. Absorption of UV by high water content and shielding of viruses near the center of the aggregate are considered responsible for this trend. Across the different media, IEs in AS and in BE were much lower than in DI for both aerosol and droplet transmission, indicating that solids present in AS and BE exhibited a protective effect. For particles sprayed in a protective medium, RH is not a significant parameter.