La exposición prenatal a fluoruro induce cambios en la porción coronal de la cripta ósea y altera la erupción dental en crías lactantes / Prenatal fluoride exposure induces changes in the coronal portion of bony crypt and alters dental eruption in suckling rats

La erupción dental es un proceso estrictamente regulado y programado espacial y temporalmente. El objetivo del trabajo fue estudiar el efecto de la exposición prenatal a fluoruro de sodio (NaF) sobre los eventos morfológicos y celulares que ocurren en el hueso supracoronal del primer molar de crías de rata durante la etapa preeruptiva. Se emplearon crías (n=6-8 por grupo) provenientes de madres que bebieron crónicamente agua con diferentes concentraciones de F- en forma de NaF durante la gestación y lactancia: control y NaF (50 mg/L). En cortes histológicos de la mandíbula de crías de 3 y 10 días se analizaron parámetros de histomorfometría estática en la zona supracoronal de la canastilla ósea a la altura del primer molar inferior: volumen óseo trabecular [BV/TV (%)], número de osteoclastos por milímetro (N.Oc/mm) y las variables indirectas: número de trabéculas [Tb.N (1/mm)], espesor [Tb.Th (µm)] y separación trabecular [Tb.Sp (µm)]. En crías de 15 días se midió el grado de erupción [TED (µm)] del primer molar inferior. Los resultados se analizaron con el test "t" de Student considerando diferencias significativas a p<0,05. El análisis histomorfométrico demostró un incremento en el BV/TV (%) del hueso supracoronal (p<0,01) asociado con disminución del N.Oc/mm (p<0,01) en crías de 3 y 10 días expuestas prenatalmente al F-. El grado de erupción dental fue menor en animales expuestos prenatalmente al F- en comparación con los controles (p<0,01). En conclusión, los resultados observados en la mandíbula de crías expuestas durante la etapa prenatal y posnatal temprana al F- sugieren un efecto disruptivo sobre la actividad resortiva necesaria para formación del canal eruptivo. (AU)

Tooth eruption is a tightly regulated and spatially and temporally programmed process. The aim of this study was to examine the effect of prenatal NaF exposure on the morphological and cellular events that occur in the supracoronal area of bony crypt of the first rat molar during the preeruptive stage. Offspring from two groups of rats were used (6-8 per group): Control and 50 mg/L NaF. The treatment was performed during pregnancy and lactation. Suckling pups were euthanized at 3-, 10- and 15-days-old by cervical dislocation. Mandibles were removed and histologically processed to obtain buccolingual sections stained with H&E. In sections of first mandibular molar of 3- and 10-days-old pups, the following static histomorphometric parameters were evaluated: trabecular bone volume [BV/TV (%)] and number of osteoclasts (N.Oc/mm). Also, indirect parameters were obtained: trabecular number [Tb.N (1/mm)], trabecular thickness [Tb.Th (µm)], and trabecular separation [Tb.Sp (µm)]. The degree of tooth eruption [TED (µm)] was determined. Results are expressed as mean ± SE and analyzed by Student t-test. Histomorphometric analysis showed an increase in the BV/TV (%) of the bone crypt of 3- and 10- days-old pups exposed to NaF (p <0.01); this increase was associated with a decrease in the N.Oc/mm (p <0.01). TED of mandibular first molar was lower in prenatal NaF exposed group than in control group (p<0.01). In conclusion, the increased BV/TV and the lower N.Oc observed in the bone crypt of 3- and 10- days-old pups from mothers treated with NaF suggested a disruptive effect triggered by F- on the formation events of the eruptive pathway in the offspring. (AU)

Fully automated production of sodium [(18)F]fluoride on AllInOne and miniAllInOne synthesizers.

A fully automated production of the imaging agent sodium [(18)F]fluoride ([(18)F]NaF) on two different modules commercialized by Trasis®, the AllInOne and the miniAllInOne, is reported. Both modules allow to prepare [(18)F]NaF in good radiochemical yield (around 97%) in less than 4min with the same specifications. Quality control of [(18)F]NaF produced by this way was performed according to the US and European Pharmacopeia monograph requirements.

The development of a new desensitising mouthwash containing arginine, PVM/MA copolymer, pyrophosphates, and sodium fluoride--a hydraulic conductance study.

OBJECTIVE: To investigate the ability of a novel mouthwash comprised of 0.8% arginine, PVM/MA copolymer, pyrophosphates, and 0.05% sodium fluoride in an alcohol-free base (Pro-Argin™ Mouthwash Technology) to reduce dentine permeability. METHODS: Hydraulic conductance was used to assess the dentine permeability effects of the arginine mouthwash. Aqueous solutions containing arginine and PVM/MA copolymer were studied in the initial stage of the method development. The acid resistance was tested with a cola drink challenge. Finally, a blinded study was carried out to determine the occlusion of the arginine mouthwash in comparison to a negative control mouthwash. RESULTS: Dentine discs treated with the arginine mouthwash showed an average fluid reduction of 42%, which was statistically, significantly better than the fluid reduction for the negative control mouthwash. In addition, experiments using simple solutions of arginine and PVM/MA copolymer, alone and in combination, demonstrated that the combination of the two was required to provide a relevant occlusion benefit. Finally, the occlusion provided by the arginine mouthwash was maintained after exposure to an acid challenge. CONCLUSION: The exclusive combination of ingredients in the arginine mouthwash has been proven to be efficacious in decreasing dentine fluid flow as measured by hydraulic conductance. The new mouthwash works by occlusion, due to the unique combination of arginine, PVM/MA copolymer and pyrophosphates.

Color-tunable and enhanced luminescence of well-defined sodium scandium fluoride nanocrystals.

In this paper, well-defined and regular-shaped Na3ScF6 nanocrystals (NCs) have been synthesized in high boiling organic solvents 1-octadecene (ODE) and oleic acid (OA), via the thermal decomposition of rare-earth oleate precursors. It is found that highly uniform monoclinic Na3ScF6 NCs with narrow size distribution have been obtained, which can easily be dispersed in cyclohexane solvent to form transparent colloid solutions. Upon 980 laser diode (LD) excitation, the relative up-conversion (UC) emission intensities of different colors in Yb(3+)/Er(3+), Yb(3+)/Tm(3+) and Yb(3+)/Ho(3+) doped Na3ScF6 can be tuned by altering the Yb(3+) doping concentration, resulting in the tunable multicolor in a wide range. On the basis of the emission spectra and the plot of luminescence intensity to pump power, the UC mechanisms of the co-doped Na3ScF6 NCs were investigated in detail. Moreover, the UC emission intensities can be significantly improved by coating a layer of Na3ScF6:Yb(3+)/Ln(3+) shell on Na3ScF6:Yb(3+)/Ln(3+) cores with respect to that of pure Na3ScF6:Yb(3+)/Ln(3+) core NCs. Furthermore, transparent and UC luminescent NCs/polydimethylsiloxane (PDMS) composites with regular dimensions were also fabricated by an in situ polymerization route. Uniform NCs with a wide variation of luminescence colors will show potential applications in diverse fields.

[Adaptation of the (18)FDG module for the preparation of a sodium fluoride [(18)F] injection solution in agreement with the United States (USP 32) and European Pharmacopeia (PhEur 6)]. / Adaptación del módulo de (18)FDG para la preparación de una disolucióninyectable de [(18)F] fluoruro sódico de conformidad con la Farmacopea Americana(USP 32) y Europea (PhEur 6).

OBJECTIVE: To establish an automated procedure for the preparation of sodium fluoride (18)F injection using the resources available in our laboratory for the preparation of (18)FDG and to analyze the repercussion of the conditioning column of the fluoride ion entrapment on the characteristics of the final product. MATERIAL AND METHOD: The sequence of an (18)FDG synthesis module prepared so that it traps the fluoride ion from the cyclotron in ion-exchange resin diluted with 0.9% sodium chloride. The final solution was dosified and sterilized in a final vial in an automatized dispensing module. Three different column conditioning protocols within the process were tested. Quality controls were run according to USP 32 and EurPh 6, adding control of ethanol levels of residual solvent and quality controls of the solution at 8 h post-preparation. RESULTS: Activation of the resin cartridges with ethanol and water was the chosen procedure, with fluoride ion trapping > 95% and pH around 7. Ethanol levels were < 5.000 ppm. Quality controls at 8 h indicated that the solution was in compliance with the USP 32 and EurPh 6 specifications. CONCLUSION: This is an easy, low-cost, reliable automated method for sodium fluoride preparation in PET facilities with existing equipment for (18)FDG synthesis and quality control.

Molecular mechanisms of bone 18F-NaF deposition.

There is renewed interest in (18)F-NaF bone imaging with PET or PET/CT. The current brief discussion focuses on the molecular mechanisms of (18)F-NaF deposition in bone and presents model-based approaches to quantifying bone perfusion and metabolism in the context of preclinical and clinical applications of bone imaging with PET.

Synthesis of colloidal upconverting NaYF4 nanocrystals doped with Er3+, Yb3+ and Tm3+, Yb3+ via thermal decomposition of lanthanide trifluoroacetate precursors.

Upconverting lanthanide-doped nanocrystals were synthesized via the thermal decomposition of trifluoroacetate precursors in a mixture of oleic acid and octadecene. This method provides highly luminescent nanoparticles through a simple one-pot technique with only one preparatory step. The Er3+, Yb3+ and Tm3+, Yb3+ doped cubic NaYF4 nanocrystals are colloidally stable in nonpolar organic solvents and exhibit green/red and blue upconversion luminescence, respectively, under 977 nm laser excitation with low power densities.

Production of fluoridated salt.

Sodium and potassium fluoride are used for the fluoridation of household salt. Addition of fluoride is carried out either by the wet or the dry process. Qualitatively good fluoridated salt can be produced by using either method. In the wet process, a solution of potassium fluoride is mixed homogeneously with the salt. For the dry mixture, only sodium fluoride with a small granule size is suitable. Apart from the mixing methods used by the larger salt manufacturers, there are low-cost solutions for very small producers.