RESUMEN
Titanium plates are the current gold standard for fracture fixation of the mandible. Magnesium alloys such as WE43 are suitable biodegradable alternatives due to their high biocompatibility and elasticity modulus close to those of cortical bone. By surface modification, the reagibility of magnesium and thus hydrogen gas accumulation per time are further reduced, bringing plate fixation with magnesium closer to clinical application. This study aimed to compare bone healing in a monocortical mandibular fracture model in sheep with a human-standard size, magnesium-based, plasma electrolytic-oxidation (PEO) surface modified miniplate fixation system following 4 and 12 weeks. Bone healing was analyzed using micro-computed tomography and histological analysis with Movat's pentachrome and Giemsa staining. For evaluation of the tissue's osteogenic activity, polychrome fluorescent labeling was performed, and vascularization was analyzed using immunohistochemical staining for alpha-smooth muscle actin. Bone density and bone mineralization did not differ significantly between titanium and magnesium (BV/TV: T1: 8.74 ± 2.30%, M1: 6.83 ± 2.89%, p = 0.589 and T2: 71.99 ± 3.13%, M2: 68.58 ± 3.74%, p = 0.394; MinB: T1: 26.16 ± 9.21%, M1: 22.15 ± 7.99%, p = 0.818 and T2: 77.56 ± 3.61%, M2: 79.06 ± 4.46%, p = 0.699). After 12 weeks, minor differences were observed regarding bone microstructure, osteogenic activity, and vascularization. There was significance with regard to bone microstructure (TrTh: T2: 0.08 ± 0.01 mm, M2: 0.06 ± 0.01 mm; p = 0.041). Nevertheless, these differences did not interfere with bone healing. In this study, adequate bone healing was observed in both groups. Only after 12 weeks were some differences detected with larger trabecular spacing and more vessel density in magnesium vs titanium plates. However, a longer observational time with full resorption of the implants should be targeted in future investigations.
Asunto(s)
Placas Óseas , Magnesio , Mandíbula , Titanio , Animales , Magnesio/farmacología , Titanio/química , Titanio/farmacología , Ovinos , Mandíbula/cirugía , Mandíbula/diagnóstico por imagen , Curación de Fractura/efectos de los fármacos , Propiedades de Superficie , Osteogénesis/efectos de los fármacos , Fracturas Mandibulares/cirugía , Fracturas Mandibulares/diagnóstico por imagen , Microtomografía por Rayos X , Aleaciones/químicaRESUMEN
BACKGROUND: Pediatric condylar fractures combined with symphyseal or parasymphyseal fractures are common but challenging to manage. The authors present fracture characteristics, propose a treatment algorithm, and evaluate the treatment prognosis of pediatric symphyseal/parasymphyseal-condylar fractures. METHODS: A retrospective review was conducted on pediatric patients who underwent treatment for symphyseal/parasymphyseal-condylar fractures in a trauma center between January of 2006 and January of 2021. Demographic and fracture characteristics were recorded. Complications and functional evaluations, including maximum interincisal opening, Helkimo anamnestic index, and clinical dysfunction index, were assessed after at least 1 year of follow-up. RESULTS: After screening, 104 participants met the inclusion criteria. Among them, 50.96% received open reduction and internal fixation for symphyseal/parasymphyseal fractures and closed treatment for condylar fractures, 45.19% were treated by liquid diet and functional exercise, and the remaining 3.85% with severe malocclusion were treated with the assistance of orthodontic appliances. During follow-up, the average maximum interincisal opening of the patients increased from 17 ± 6.29 mm to 41.64 ± 6.33 mm. No subjective symptoms were observed in 86.54% of the patients and 79.81% showed no or mild clinical symptoms. Except for 1 patient who developed temporomandibular joint ankylosis, no other severe complication was reported. Postfracture remodeling of the nonfractured condyle was noted in 3 cases. CONCLUSIONS: Pediatric symphyseal/parasymphyseal-condylar fractures present unique biomechanical and anatomic challenges that require special consideration during management. In this study, satisfactory functional prognosis was achieved following implementation of the treatment algorithm. CLINICAL QUESTION/LEVEL OF EVIDENCE: Therapeutic, IV.
Asunto(s)
Fijación Interna de Fracturas , Cóndilo Mandibular , Fracturas Mandibulares , Humanos , Estudios Retrospectivos , Masculino , Niño , Femenino , Fracturas Mandibulares/cirugía , Fracturas Mandibulares/diagnóstico por imagen , Cóndilo Mandibular/lesiones , Cóndilo Mandibular/cirugía , Cóndilo Mandibular/diagnóstico por imagen , Pronóstico , Fijación Interna de Fracturas/métodos , Adolescente , Preescolar , Resultado del Tratamiento , Algoritmos , Reducción Abierta/métodosRESUMEN
BACKGROUND: A quantification of the residual bone mass of the mandible (B/A) was utilized in this study to examine the correlation between mandibular fracture and residual bone mass. To improve the clinical utilization rate and reduce the incidence of iatrogenic mandibular fractures, the B/A ratio calculation should be simplified. MATERIAL AND METHODS: Data were collected from the Yanbian University Hospital on 175 cases of mandibular fracture with third molar (M3), 67 normal cases without fractures and 20 cases of impacted teeth extraction. Twenty cases of iatrogenic mandibular fracture were collected, and the case records and panoramic radiographs of the patients were recorded. RESULTS: The average B/A ratio of mandibular angle fracture group was 0.61±0.10.The value of B/A was found to be statistically significant in terms of whether M3 emerged from alveolar bone (P = 0.001), location (horizontal P < 0.001, vertical P < 0.001), the degree of impaction (P < 0.001), the number of roots (P < 0.001), the difference in impaction (P < 0.001), and the fracture type (P = 0.002). The average B/A ratio of normal group was 0.62±0.10. In the statistical results of the B/A value of normal patients, M3 involving alveolar bone (P < 0.001), position classification (P < 0.05), degree of impaction (P < 0.001) and presence or absence of a root (P < 0.05) were statistically significant. The average B/A ratio of iatrogenic mandibular angle fracture group was 0.28±0.08. The average B/A ratio of the extraction group for impacted teeth was 0.62 ± 0.09. CONCLUSIONS: There is a high risk of mandibular angle fracture when the (B/A) value of the residual bone height (B) in the mandibular M3 area compared to the mandibular bone height (A) in the M3 area is less than 0.4.
Asunto(s)
Fracturas Mandibulares , Tercer Molar , Humanos , Tercer Molar/diagnóstico por imagen , Fracturas Mandibulares/diagnóstico por imagen , Fracturas Mandibulares/etiología , Fracturas Mandibulares/epidemiología , Femenino , Masculino , Adulto , Adulto Joven , Persona de Mediana Edad , Mandíbula/diagnóstico por imagen , Adolescente , Densidad Ósea , Medición de RiesgoRESUMEN
Isolated coronoid process fractures are uncommon, and iatrogenic isolated fractures are extremely rare. This case describes a displaced fracture of an isolated coronoid process thought to be due to excessive force applied by a dentist that had been overlooked and left untreated for about a month. The patient was a woman in her late 50's and she had undergone a molar extraction. Her dentist had confused her symptoms of trismus, pain, and facial oedema with the complex tooth extraction procedure. Following a cone-beam computed tomography (CBCT) scan we showed that the mandibular coronoid process on her right side had suffered a longitudinal fracture, and the fractured fragment had rotated upwards and inwards. Following successful surgical elimination of the fragmented coronoid process, the patient received targeted physiotherapy sessions that yielded excellent results. At the five-month follow-up, the ability of the patient to open her mouth had improved enormously, and her facial appearance almost recovered to its original state.
Asunto(s)
Tomografía Computarizada de Haz Cónico , Extracción Dental , Humanos , Femenino , Extracción Dental/efectos adversos , Persona de Mediana Edad , Diente Molar/cirugía , Diente Molar/lesiones , Fracturas Mandibulares/cirugía , Fracturas Mandibulares/diagnóstico por imagen , Mandíbula/cirugía , Mandíbula/diagnóstico por imagen , Mandíbula/patologíaRESUMEN
This study aimed to assess the reliability and safety of transoral endoscopic-assisted reduction internal fixation (TERIF) for treating short-segment condylar neck fractures (CNF), including hardware removal. Patients with displaced CNF and short condylar segments treated using TERIF were included in the study. Clinical evaluation covered dental occlusion, range of mouth opening, deviation during mouth opening, protrusion, laterotrusion, pain, and chewing. Radiological evaluation was used to assess fracture displacement, angulation, head dislocation, postoperative reduction, fixation stability, and bone healing. The same technique was used to treat 15 patients with 18 CNF and short condylar segments. Hardware removal was performed for nine fractures in eight patients after fracture healing using the same approach. All patients regained satisfactory, pain-free mouth opening with no deviation and complete bone healing. Computed tomographic images displayed adequate reduction and stable fixation during the follow-up period for all patients. No temporary or permanent facial nerve impairment occurred in any of the patients. TERIF is a reliable and safe treatment for CNF with short condylar segments, even in the presence of head dislocation, medial override, and malunited fractures; hardware can be safely removed after healing using the same approach.
Asunto(s)
Fijación Interna de Fracturas , Cóndilo Mandibular , Fracturas Mandibulares , Humanos , Fracturas Mandibulares/cirugía , Fracturas Mandibulares/diagnóstico por imagen , Cóndilo Mandibular/cirugía , Cóndilo Mandibular/lesiones , Cóndilo Mandibular/diagnóstico por imagen , Fijación Interna de Fracturas/métodos , Fijación Interna de Fracturas/instrumentación , Masculino , Adulto , Femenino , Persona de Mediana Edad , Adulto Joven , Tomografía Computarizada por Rayos X , Endoscopía/métodos , Cirugía Endoscópica por Orificios Naturales/métodos , Resultado del TratamientoRESUMEN
OBJECTIVES: Double puncture arthrocentesis (DPA) of the temporomandibular joint (TMD) is considered an effective preservative option for managing mandibular condylar head fractures. However, the procedure is commonly performed by a traditional "blind" method using anatomical characteristics. In the present study, an ultrasonography (US) device was applied for the treatment of a case with a fractured mandibular condyle. METHODS: A 79-year-old female was diagnosed right side condylar head fracture complaining pain of right TMD and reduced mouth opening range: inter-incisor distance of 20 mm. Since the fracture position was high and inoperable, the decision was made to perform DPA of the TMD. The US probe was positioned parallel and slightly oblique to the major axis of the mandibular ramus. Both the posterior and anterior insertions into the joint space were performed according to the axis mentioned above, which enabled the operator to visualize the entirety of the needle. RESULTS: The device offered safety and ensured accuracy by providing real-time visual aid to the surgeon. The procedure provided an early increase in the inter-incisor distance (31 mm) and pain relief. CONCLUSIONS: Hence, for the preservative treatment of mandibular condylar head fractures, based on the present study, we recommend US-guided arthrocentesis as a safe, feasible, and effective therapeutic option instead of the conventional "blind" method.
Asunto(s)
Artrocentesis , Cóndilo Mandibular , Fracturas Mandibulares , Ultrasonografía Intervencional , Humanos , Femenino , Anciano , Cóndilo Mandibular/diagnóstico por imagen , Cóndilo Mandibular/lesiones , Fracturas Mandibulares/diagnóstico por imagen , Fracturas Mandibulares/cirugía , Fracturas Mandibulares/terapia , Fracturas Mandibulares/complicacionesRESUMEN
BACKGROUND: The sagittal fracture of the mandibular condyle can be fixed with absorbable long screws. Absorbable long screws are generally inserted from the lateral crest of the condyle and are as close as possible to the medial pole of the condyle to obtain sufficient retention force. However, in clinical practice, patients with locally comminuted condylar fractures and partial defects in the lateral crest are often encountered. We validated the use of absorbable plates and long screws to fix mandibular condylar fractures with lateral crest defects, and postoperative follow-up showed good results. METHODS: The preoperative design indicated that if conventional long screws were used, more soft tissue need to be pulled downward to achieve the appropriate drilling angle. If an absorbable plate was used, the degree of downward pulling of soft tissue was smaller, which can better protect the parotid gland tissue and facial nerve. The surgery was performed according to the preoperative design, using an absorbable plate scheme. RESULTS AND DISCUSSION: Postoperative CT confirmed a stable anatomical reduction of condyle. Four-month follow-up showed that the patient's facial shape, occlusion, and mouth opening were all good. Follow-up CT showed good fracture healing. It is feasible to use absorbable plates and long absorbable screws to fix mandibular condylar sagittal fracture accompanied by lateral condylar crest defect.
Asunto(s)
Implantes Absorbibles , Placas Óseas , Tornillos Óseos , Fijación Interna de Fracturas , Cóndilo Mandibular , Fracturas Mandibulares , Humanos , Cóndilo Mandibular/lesiones , Cóndilo Mandibular/cirugía , Cóndilo Mandibular/diagnóstico por imagen , Fracturas Mandibulares/cirugía , Fracturas Mandibulares/diagnóstico por imagen , Fracturas Mandibulares/complicaciones , Fijación Interna de Fracturas/métodos , Fijación Interna de Fracturas/instrumentación , Masculino , Adulto , Tomografía Computarizada por Rayos X , Femenino , Resultado del Tratamiento , Fracturas Conminutas/cirugíaRESUMEN
The use of absorbable plates can be challenging for mandibular fractures involving bilateral dentition. Chewing and mouth opening movements may cause loosening or breakage of absorbable materials, leading to displacement of bone segments and resulting in malocclusion. The use of absorbable materials for bilateral mandibular fracture surgery itself raises concerns for surgeons. Timely intermaxillary elastic traction is essential for these patients after surgery to maintain correct occlusion. The surgical approaches were performed with intraoral mandibular sulcus incisions. During the surgery, intermaxillary fixation screws were implanted and steel wires were used for intermaxillary ligation and fixation to restore the occlusal. After the fractured segments were sequentially reduced, they were fixed with inion 2.0 absorbable plates. The patient underwent intermaxillary elastic traction for 1 week. Elastic mask was used to assist in stabilizing the position of the jawbone and maintaining occlusion. After discharge, the patient continued traction at home for 3 weeks before removing the intermaxillary fixation screws. The patient recovered well after surgery without any complications. The postoperative occlusal relationship is good. Postoperative CT showed good reduction of the fractured segments. For the case reported in this article, elastic traction was promptly implemented after surgery. We emphasize that restoring occlusion is always the treatment goal for jawbone fractures. We believe that keeping the intermaxillary fixation screws for a month is a wise choice to be prepared for unexpected needs.
Asunto(s)
Implantes Absorbibles , Placas Óseas , Fijación Interna de Fracturas , Fracturas Mandibulares , Tracción , Humanos , Fracturas Mandibulares/cirugía , Fracturas Mandibulares/diagnóstico por imagen , Fijación Interna de Fracturas/instrumentación , Fijación Interna de Fracturas/métodos , Tracción/instrumentación , Tornillos Óseos , Masculino , Técnicas de Fijación de Maxilares/instrumentación , Tomografía Computarizada por Rayos X , AdultoRESUMEN
Fractures of the mandibular condyle account for a significant proportion of mandibular fractures. The specific functional loads require particular specifications for the implant design used for open reduction and internal fixation of such fractures. The clinical and radiographic outcomes in patients treated using a single rhombic 3D condylar fracture plate for open reduction and internal fixation at a single institution, and who fulfilled the inclusion and exclusion criteria, are presented. The primary outcome variables were: occlusion, maximum interincisal distance and mandibular excursion at 1, 3, and 6 months postoperatively, and radiographic measurements for mandibular height and gonion angle. In total, 263 patients were included, of whom 173 (65.8%) were male and 90 (34.2%) female. The mean age was 40.4 ± 18.9 years. There was satisfactory occlusion in 98.9% of patients at the 6-month follow-up, and a significant improvement in all parameters for mandibular excursion (p < 0.001), with a reduced ramus height and an increase in the gonion angle on the fractured side. Excellent clinical and radiographic results were achieved using the rhombic-shaped implant, deeming it appropriate for the osteosynthesis of mandibular condyle fractures.
Asunto(s)
Placas Óseas , Fijación Interna de Fracturas , Cóndilo Mandibular , Fracturas Mandibulares , Reducción Abierta , Humanos , Fracturas Mandibulares/cirugía , Fracturas Mandibulares/diagnóstico por imagen , Femenino , Fijación Interna de Fracturas/métodos , Fijación Interna de Fracturas/instrumentación , Cóndilo Mandibular/lesiones , Cóndilo Mandibular/cirugía , Cóndilo Mandibular/diagnóstico por imagen , Masculino , Adulto , Estudios Retrospectivos , Persona de Mediana Edad , Reducción Abierta/métodos , Resultado del Tratamiento , Adulto Joven , Adolescente , AncianoRESUMEN
The objective of this retrospective study was to assess the bone quality of healing mandibular fracture sites by measuring the Hounsfield units (HU) on computed tomographic (CT) images obtained presurgery and postsurgery in patients treated with rigid internal fixation (RIF). The HU values of healing fracture sites were compared to those of corresponding nonfractured (control) sites on the opposing side and cervical vertebrae sites in the same patients. In total, 31 patients with 45 mandibular fractures treated with RIF underwent presurgical and postsurgical CT examinations. The scans performed after surgery (1, 3, 6, 12, or 18 months) were taken only when there was a need for radiographic evaluation due to a complaint of discomfort from the patient or when the surgeon needed to verify the postsurgical outcome, and each patient underwent only a single postsurgical CT. At the presurgical CT examination, the HU values were lower in the fracture sites than in the control sites. At 3 months postsurgery, the HU values in the fracture sites had increased as the mandibular bone healed. At 6 months postsurgery, the HU values in the fracture sites were higher than those of the control sites. At 12 and 18 months postsurgery, the HU values of both sites were similar. The HU values of the cervical vertebrae remained constant with time. These results suggest that, in patients who have been treated with RIF for mandibular bone fracture, HU values measured by CT vary across time, expressing the physiologic bone healing process.
Asunto(s)
Densidad Ósea , Fracturas Mandibulares , Humanos , Estudios Retrospectivos , Densidad Ósea/fisiología , Fracturas Mandibulares/diagnóstico por imagen , Fracturas Mandibulares/cirugía , Tomografía Computarizada por Rayos X/métodos , TomografíaAsunto(s)
Fracturas Espontáneas , Fracturas Mandibulares , Humanos , Fracturas Mandibulares/diagnóstico por imagen , Persona de Mediana Edad , Fracturas Espontáneas/diagnóstico por imagen , Fracturas Espontáneas/cirugía , Fracturas Espontáneas/etiología , Diagnóstico Diferencial , Radiografía Panorámica , Masculino , Tomografía Computarizada por Rayos XRESUMEN
BACKGROUND: It is very important to detect mandibular fracture region. However, the size of mandibular fracture region is different due to different anatomical positions, different sites and different degrees of force. It is difficult to locate and recognize fracture region accurately. METHODS: To solve these problems, M3YOLOv5 model is proposed in this paper. Three feature enhancement strategies are designed, which improve the ability of model to locate and recognize mandibular fracture region. Firstly, Global-Local Feature Extraction Module (GLFEM) is designed. By effectively combining Convolutional Neural Network (CNN) and Transformer, the problem of insufficient global information extraction ability of CNN is complemented, and the positioning ability of the model to the fracture region is improved. Secondly, in order to improve the interaction ability of context information, Deep-Shallow Feature Interaction Module (DSFIM) is designed. In this module, the spatial information in the shallow feature layer is embedded to the deep feature layer by the spatial attention mechanism, and the semantic information in the deep feature layer is embedded to the shallow feature layer by the channel attention mechanism. The fracture region recognition ability of the model is improved. Finally, Multi-scale Multi receptive-field Feature Mixing Module (MMFMM) is designed. Deep separate convolution chains are used in this modal, which is composed by multiple layers of different scales and different dilation coefficients. This method provides richer receptive field for the model, and the ability to detect fracture region of different scales is improved. RESULTS: The precision rate, mAP value, recall rate and F1 value of M3YOLOv5 model on mandibular fracture CT data set are 97.18%, 96.86%, 94.42% and 95.58% respectively. The experimental results show that there is better performance about M3YOLOv5 model than the mainstream detection models. CONCLUSION: The M3YOLOv5 model can effectively recognize and locate the mandibular fracture region, which is of great significance for doctors' clinical diagnosis.
Asunto(s)
Fracturas Mandibulares , Humanos , Fracturas Mandibulares/diagnóstico por imagen , Almacenamiento y Recuperación de la Información , Redes Neurales de la Computación , SemánticaRESUMEN
This study aimed to evaluate the feasibility and accuracy of a combined virtual surgical planning (VPS) and short-segment drilling guides (SSDGs) workflow for the treatment of complex mandibular fractures. Consecutive patients with complex mandibular fractures underwent treatment using the VPS and SSDGs workflow from August 2020 to April 2022. Various mandibular landmarks were compared between the preoperative virtual surgical plan and postoperative data, including condylar distance (CoD), mandibular angle width (GoL-GoR), GoMeGo angle (â GoL-Me-GoR), the difference in mandibular angles between the left and right sides (Δâ Co-Go-Me), and the difference in length between the left and right mandibular body (ΔGo-Me). Additionally, preoperative preparation time and surgical duration were retrospectively analyzed and compared to conventional surgery. All 14 consecutive patients with complex mandibular fractures achieved successful reduction using the VPS and SSDGs workflow. Three-dimensional comparison revealed a mean deviation distance of 0.91 ± 0.50 mm and a root-mean-square deviation of 1.75 ± 0.47 mm between the preoperative designed mandible model and the postoperative mandible model. The percentage of points with deviation distances less than 2 mm, 1 mm, and 0.5 mm between preoperative and postoperative models were 78.47 ± 8.87 %, 60.02 ± 14.28 %, and 38.64 ± 15.48 %, respectively. There were no significant differences observed in CoD, GoL-GoR, â GoL-Me-GoR, Δâ Co-Go-Me, and ΔGo-Me between preoperative virtual surgical planning and postoperative measurements. Furthermore, no significant differences were found in the injury-to-surgery interval, admission-to-surgery interval, and surgical duration between the workflow and conventional surgery. The combined VPS and SSDGs workflow proved to be an accurate and feasible method for treating complex mandibular fractures. It offers advantages such as minimal preoperative preparation time and the ability to precise transfer screw positions of the pre-bent reconstruction plate during surgery. This approach is particularly suitable for managing complex mandibular fractures.
Asunto(s)
Fracturas Mandibulares , Reconstrucción Mandibular , Cirugía Asistida por Computador , Humanos , Fracturas Mandibulares/diagnóstico por imagen , Fracturas Mandibulares/cirugía , Estudios Retrospectivos , Tomografía Computarizada por Rayos X/métodos , Cirugía Asistida por Computador/métodos , Mandíbula/cirugía , Reconstrucción Mandibular/métodosRESUMEN
OBJECTIVES: This study assessed the incidence of postfracture radiological temporomandibular joint (TMJ) degeneration in patients with different types of mandibular fractures, focusing on the impact of condylar fractures. METHODS: This retrospective review included patients diagnosed as having mandibular fractures from 2016 to 2020 who had undergone initial computed tomography (CT) and a follow-up CT scan at least 1-month postfracture. Patient demographics, fracture details, treatment methods, and radiological signs of TMJ degeneration on CT were analyzed to identify risk factors for postfracture TMJ degeneration, with a focus on condylar head fracture and non-head (condylar neck or base) fractures. RESULTS: The study included 85 patients (mean age: 38.95 ± 17.64 years). The per-patient analysis indicated that the incidence of new radiologic TMJ degeneration on CT was significantly the highest (p < 0.001) in patients with condylar head fractures (90.91%), followed by those with non-head condylar fractures (57.14%), and those without condylar involvement (24.49%). The per-joint analysis indicated nearly inevitable degeneration (93.94%) in 33 TMJs with ipsilateral condylar head fractures. For the remaining 137 TMJs, multivariate logistic regression revealed that other patterns (ipsilateral non-head, contralateral, or both) of condylar fractures (odds ratio (OR) = 3.811, p = 0.007) and the need for open reduction and internal fixation (OR = 5.804, p = 0.005) significantly increased the risk of TMJ degeneration. CONCLUSIONS: Ipsilateral non-head condylar fractures and contralateral condylar fractures are associated with a high risk of postfracture TMJ degeneration. Indirect trauma plays a vital role in postfracture TMJ degeneration.
Asunto(s)
Cóndilo Mandibular , Fracturas Mandibulares , Trastornos de la Articulación Temporomandibular , Tomografía Computarizada por Rayos X , Humanos , Fracturas Mandibulares/diagnóstico por imagen , Masculino , Femenino , Estudios Retrospectivos , Adulto , Cóndilo Mandibular/diagnóstico por imagen , Cóndilo Mandibular/lesiones , Trastornos de la Articulación Temporomandibular/diagnóstico por imagen , Factores de Riesgo , Persona de Mediana Edad , Incidencia , Articulación Temporomandibular/diagnóstico por imagen , Articulación Temporomandibular/lesiones , Anciano , AdolescenteRESUMEN
OBJECTIVE: The decision to retain or extract teeth in the line of mandibular fractures has been a subject of debate in much of the scientific literature, and there is a need for further evidence to clear this issue. Thus, the aim of this study was to investigate both the positive and negative effects of teeth in the line of mandibular fractures provide more evidence in this field, as well as take into consideration patients' quality of life after the surgery. METHODS: Patients after trauma with teeth in the line of mandibular fractures were included in this study. Open reduction and rigid internal fixation, elastic intermaxillary reduction were expected to achieve a satisfactory occlusion and/or anatomical reduction in the fragments as assessed by orthopantomogram, computed tomography scans, and clinical examination. The remaining cases had maxillomandibular fixation (MMF) with an arch bar and bridle wire. All the patients included in this study will take the Visual Analog Scale score evaluation before and after surgery subjectively to further verify the impact on their life qualify, as well as the further treatment needed. RESULTS: A total of 78 patients with teeth in the line of mandibular fractures were included in this study. Open reduction and rigid internal fixation was used in 37 patients, whereas another 35 patients accepted elastic intermaxillary reduction. Six cases underwent MMF. The number of involved teeth was 83. Three of the 83 teeth involved in the fracture lines healed with complications. In the cases where the teeth had been removed before fracture treatment, or in cases of delayed extractions, no complications were noted. The majority of the patients felt good about the whole treatment, however, 4 in the MMF group complained about worry about their oral health due to MMF leading to mouth open limitation. CONCLUSION: The factors that should be considered for removal include the condition of the teeth and alveolar bone, the timing and the type of treatment, as well as the patients' desire, if possible. This is an individual-based decision that needs to consider more objective and subjective potential risks to avoid complications.
Asunto(s)
Fijación Interna de Fracturas , Fracturas Mandibulares , Calidad de Vida , Radiografía Panorámica , Humanos , Fracturas Mandibulares/cirugía , Fracturas Mandibulares/diagnóstico por imagen , Masculino , Femenino , Fijación Interna de Fracturas/métodos , Adulto , Tomografía Computarizada por Rayos X , Técnicas de Fijación de Maxilares , Extracción Dental , Persona de Mediana Edad , Resultado del Tratamiento , Traumatismos de los Dientes , Reducción Abierta/métodosRESUMEN
To investigate the role of a fully digital process in the surgical treatment of mandibular fractures in children. We analyzed a complete dataset from 22 children with mandibular fractures treated with digital surgical assistance. The patient's treatment process included preoperative thin layer CT (Computed Tomography) scanning, computer-aided design (3D reconstruction, virtual reduction, and internal fixation device determination and shaping), and 3D printing (jaw model, bite plate). We used occlusal and shaping plates during surgery to assist in fracture reduction and fixation. During the follow-up, we observed the occurrence of fracture healing, occlusal relationships, opening degrees, and complications in pediatric patients after surgery. Next, we used the 3D overlay function of MIMICS software to compare the preoperative surgical design with postoperative jaw imaging data to evaluate the overall surgical effect. The postoperative imaging data showed good fracture healing, normal occlusion during follow-up, and significant improvement in opening degrees. The mean preoperative opening degree was 23.59 ± 2.89 mm, and the mean postoperative opening degree was 29.82 ± 1.79 mm; there was a significant difference between these two parameters (p < 0.05). There were no complications such as tooth germ injury, nerve injury or fracture block displacement. The postoperative mandibular imaging data was imported into MIMICS software for 3D overlay visualization, and the postoperative mandibular morphology recovery was well-matched with the preoperative design. We measured the average upper deviation (0.65 ± 0.09) mm and the average lower deviation (-0.57 ± 0.14) mm. The fully digital process has a precise, minimally invasive, and safe effect in the surgical treatment of mandibular fractures in children, and the clinical effect is satisfactory.
Asunto(s)
Fracturas Mandibulares , Humanos , Niño , Fracturas Mandibulares/diagnóstico por imagen , Fracturas Mandibulares/cirugía , Fijación Interna de Fracturas/métodos , Curación de Fractura , Impresión Tridimensional , Diseño Asistido por ComputadoraRESUMEN
Cervical necrotizing fasciitis (CNF) is a rare condition in the United States, with very few cases reported as a sequela of mandibular fracture. The authors describe the case of a 40-year-old man with poor oral health and no significant past medical history who developed CNF following delayed treatment of an open mandibular fracture, leading to life-threatening septic shock, thrombophlebitis of the internal jugular vein, and septic emboli to the lungs. Successful management of this patient was accomplished by serial surgical debridement, the administration of broad-spectrum antibiotics, and hemodynamic support. Eventual reconstruction was performed with external fixation of the mandible fracture and split-thickness skin grafting for the left neck and chest wound. The authors recommend early treatment of open mandibular fractures for immunocompromised patients or patients with poor oral hygiene to avoid the rare but potentially fatal complication of CNF and highlight external fixation as a useful technique in select cases of complex mandibular fractures.
Asunto(s)
Fascitis Necrotizante , Fracturas Mandibulares , Masculino , Humanos , Adulto , Fracturas Mandibulares/diagnóstico por imagen , Fracturas Mandibulares/cirugía , Fracturas Mandibulares/complicaciones , Fascitis Necrotizante/etiología , Fascitis Necrotizante/cirugía , Cuello , Mandíbula , Tiempo de TratamientoRESUMEN
OBJECTIVE: This study was conducted with the aim to establish standard technique of closed reduction (CR) and compare functional outcomes in patients of moderately displaced unilateral extracapsular condylar fractures. MATERIAL AND METHODS: This study is a retrospective randomized controlled trial, conducted at a tertiary care hospital setting from August, 2013 to November, 2018. Patients of unilateral extracapsular condylar fractures with ramus shortening < 7mm and deviation < 35° were divided in two groups by drawing lots and were treated by dynamic elastic therapy and maxillomandibular fixation (MMF). Mean and standard deviation were calculated for quantitative variables, and one way analysis of variance (ANOVA) and Pearson's Chi-square test were used to determine significance of outcomes between two modalities of CR. P value < 0.05 was taken as significant. RESULTS: The numbers of patients treated by dynamic elastic therapy and MMF were 76 (38 in each group). Out of which 48 (63.15%) were male and 28 (36.84%) were female. The ratio of male to female was 1.7:1. The mean ± standard deviation (SD) of age was 32 ± 9.57 years. In patients treated by dynamic elastic therapy, the mean ± SD (at 6-month follow-up) of loss of ramus height (LRH), maximum incisal opening (MIO) and opening deviation were 4.6mm ± 1.08mm, 40.4mm ± 1.57mm and 1.1mm ± 0.87mm respectively. Whereas, LRH, MIO and opening deviation were 4.6mm ± 0.85mm, 40.4mm ± 2.37mm and 0.8mm ± 0.63mm respectively by MMF therapy. One-way ANOVA was statistically insignificant (P value > 0.05) for above mentioned outcomes. Pre-traumatic occlusion was achieved in 89.47% of patients by MMF and in 86.84% patients by dynamic elastic therapy. Pearson's Chi-square test was statistically insignificant (p value < 0.05) for occlusion. CONCLUSION: Parallel results were obtained for both modalities; thus, the technique as dynamic elastic therapy, which promotes early mobilization and functional rehabilitation, can be favored as standard technique of closed reduction for moderately displaced extracapsular condylar fractures. This technique eases patients' stress associated with MMF and prevents ankylosis.
Asunto(s)
Fracturas Mandibulares , Anquilosis del Diente , Humanos , Masculino , Femenino , Adulto Joven , Adulto , Cóndilo Mandibular/diagnóstico por imagen , Cóndilo Mandibular/cirugía , Fracturas Mandibulares/diagnóstico por imagen , Fracturas Mandibulares/cirugía , Resultado del Tratamiento , Estudios Retrospectivos , Fijación Interna de Fracturas/métodos , Ensayos Clínicos Controlados Aleatorios como AsuntoRESUMEN
Condylar fracture treatment is a debated topic among maxillofacial surgeons. Various surgical techniques are used today, each one with advantages and disadvantages. The aim of this study is to present and evaluate our technique adopted for treatment of any type of extracapsular condylar fractures. Between 2020 and 2022, 16 condylar fractures were treated. In two patients with bilateral condylar fractures, the present technique was compared to the mini-retromandibular approach. All the patients were checked for clinical and radiological outcomes, facial nerve injury, scar visibility and presence of salivary complications. Dental occlusion was always restored, and facial nerve damage or salivary disorders were not observed. The skin incision, limited to the caudal two-thirds of the auricle, made the scar almost invisible and greatly improved the surgical field in the condylar neck area, facilitating the treatment. The proposed technique provides easier internal fixation for both neck and base condylar fractures with good cosmetic results, ensuring better protection of the facial nerve and parotid gland. The surgical technique described has not shown disadvantages in terms of operational difficulty, results, and complications. This novel surgical technique could represent a new choice in the treatment of extracapsular condylar fractures, although further studies are needed to support this new proposal.