Putting Photosystem I to Work: Truly Green Energy.

Meeting growing energy demands sustainably is one of the greatest challenges facing the world. The sun strikes the Earth with sufficient energy in 1.5 h to meet annual world energy demands, likely making solar energy conversion part of future sustainable energy production plans. Photosynthetic organisms have been evolving solar energy utilization strategies for nearly 3.5 billion years, making reaction centers including the remarkably stable Photosystem I (PSI) especially interesting for biophotovoltaic device integration. Although these biohybrid devices have steadily improved, their output remains low compared with traditional photovoltaics. We discuss strategies and methods to improve PSI-based biophotovoltaics, focusing on PSI-surface interaction enhancement, electrolytes, and light-harvesting enhancement capabilities. Desirable features and current drawbacks to PSI-based devices are also discussed.

Azo dye as part of co-substrate in a biofilm electrode reactor-microbial fuel cell coupled system and an analysis of the relevant microorganisms.

In general, refractory organics were hardly used as co-substrate in bioelectrochemical system. This study established a coupled bioelectrochemical system composed of a biofilm electrode reactor and a microbial fuel cell for using the azo dye X-3B as part of co-substrate. The two units degraded the azo dye X-3B stepwise while using it as part of co-substrate. Our results indicated that the removal efficiency of X-3B increased 28.5% using the coupled system compared with a control system. Moreover, the addition of the co-substrate glucose, which was necessary for MFC electricity generation, was reduced on the premise of stable removal efficiency in the coupled system to prevent resource waste due to using X-3B as part of co-substrate. The intermediate products of X-3B degradation were further explored using gas chromatography-mass spectrometry and a X-3B degradation pathway was proposed at the same time. Microbial communities were analyzed, illustrating that the mechanism of X-3B degradation was dependent on bioelectrochemistry rather than on microbial degradation.

Architectural adaptations of microbial fuel cells.

Conventional wastewater treatment consumes a large amount of money worldwide for removal of pollutants prior to its discharge into water body or facilitating reuse. Decreasing energy expenditure during wastewater treatment and rather recovering some value-added products while treating wastewater is an important goal for researchers. Microbial fuel cells (MFCs) are representative bioelectrochemical systems, which offer energy-efficient wastewater treatment. MFCs convert chemical energy of organic matter into electrical energy by using biocatalytic activities. Although MFCs are not truly commercialized, they have potential to make energy-gaining wastewater treatment technologies and represent their capabilities successfully. Over the last decade, MFCs have developed remarkably in almost every dimension including wastewater treatment capabilities, power output, and cost optimization; however, its architectural design is an important consideration for scaling up. Here, we review various architectural advancements and technology up-gradation MFCs have experienced during its journey, to take this technology step forward for commercialization.

The Planktonic Relationship Between Fluid-Like Electrodes and Bacteria: Wiring in Motion.

We have explored a new concept in bacteria-electrode interaction based on the use of fluid-like electrodes and planktonic living cells. We show for the first time that living in a biofilm is not a strict requirement for Geobacter sulfurreducens to exchange electrons with an electrode. The growth of planktonic electroactive G. sulfurreducens could be supported by a fluid-like anode as soluble electron acceptors and with electron transfer rates similar to those reported for electroactive biofilms. This growth was maintained by uncoupling the charge (catabolism) and discharge (extracellular respiration) processes of the cells. Our results reveal a novel method to culture electroactive bacteria in which every single cell in the medium could be instantaneously wired to a fluid-like electrode. Direct extracellular electron transfer is occurring but with a new paradigm behind the bacteria-electrode interaction.

Tailoring Microbial Electrochemical Cells for Production of Hydrogen Peroxide at High Concentrations and Efficiencies.

A microbial peroxide producing cell (MPPC) for H2 O2 production at the cathode was systematically optimized with minimal energy input. First, the stability of H2 O2 was evaluated using different catholytes, membranes, and catalyst materials. On the basis of these results, a flat-plate MPPC fed continuously using 200 mm NaCl catholyte at a 4 h hydraulic retention time was designed and operated, producing H2 O2 for 18 days. H2 O2 concentration of 3.1 g L-1 H2 O2 with 1.1 Wh g-1 H2 O2 power input was achieved in the MPPC. The high H2 O2 concentration was a result of the optimum materials selected. The small energy input was largely the result of the 0.5 cm distance between the anode and cathode, which reduced ionic transport losses. However, >50 % of operational overpotentials were due to the 4.5-5 pH unit difference between the anode and cathode chambers. The results demonstrate that a MPPC can continuously produce H2 O2 at high concentration by selecting compatible materials and appropriate operating conditions.

Current status, key challenges and its solutions in the design and development of graphene based ORR catalysts for the microbial fuel cell applications.

Microbial fuel cells (MFC) are considered as the futuristic energy device that generates electricity from the catalytic degradation of biodegradable organic wastes using microbes, which exist in waste water. In MFCs, oxygen serves as a cathodic electron acceptor and oxygen reduction kinetics played a significant role in the determination of overall efficiency. A wide range of strategies have been developed for the preparation and substantial modification of oxygen reduction reaction (ORR) catalysts to improve the maximum volumetric power density of MFCs, in which the efforts on graphene based ORR catalysts are highly imperative. Although numerous research endeavors have been achieved in relation with the graphene based ORR catalysts applicable for MFCs, still their collective summary has not been developed, which hinders the acquirement of adequate knowledge on tuning the specific properties of said catalysts. The intension of this review is to outline the significant role of ORR catalysts, factors influencing the ORR activity, strategies behind the modifications of ORR catalysts and update the research efforts devoted on graphene based ORR catalysts. This review can be considered as a pertinent guide to understand the design and developmental strategies of competent graphene based ORR catalysts, which are not only applicable for MFCs but also for number of electrochemical applications.

[Advances in microbial solar cells--A review].

The energy crisis has become one of the major problems hindering the development of the world. The emergence of microbial fuel cells provides a new solution to the energy crisis. Microbial solar cells, integrating photosynthetic organisms such as plants and microalgae into microbial fuel cells, can convert solar energy into electrical energy. Microbial solar cell has steady electric energy, and broad application prospects in wastewater treatment, biodiesel processing and intermediate metabolites production. Here we reviewed recent progress of microbial solar cells from the perspective of the role of photosynthetic organisms in microbial fuel cells, based on a vast amount of literature, and discussed their advantages and deficiency. At last, brief analysis of the facing problems and research needs of microbial fuel cells are undertaken. This work was expected to be beneficial for the application of the microbial solar cells technology.

Separators used in microbial electrochemical technologies: Current status and future prospects.

Microbial electrochemical technologies (METs) are emerging green processes producing useful products from renewable sources without causing environmental pollution and treating wastes. The separator, an important part of METs that greatly affects the latter's performance, is commonly made of Nafion proton exchange membrane (PEM). However, many problems have been identified associated with the Nafion PEM such as high cost of membrane, significant oxygen and substrate crossovers, and transport of cations other than protons protons and biofouling. A variety of materials have been offered as alternative separators such as ion-exchange membranes, salt bridges, glass fibers, composite membranes and porous materials. It has been claimed that low cost porous materials perform better than PEM. These include J-cloth, nylon filter, glass fiber mat, non-woven cloth, earthen pot and ceramics that enable non-ion selective charge transfer. This paper provides an up-to-date review on porous separators and plots directions for future studies.

Microscale microbial fuel cells: Advances and challenges.

The next generation of sustainable energy could come from microorganisms; evidence that it can be seen with the given rise of Electromicrobiology, the study of microorganisms' electrical properties. Many recent advances in electromicrobiology stem from studying microbial fuel cells (MFCs), which are gaining acceptance as a future alternative "green" energy technology and energy-efficient wastewater treatment method. MFCs are powered by living microorganisms with clean and sustainable features; they efficiently catalyse the degradation of a broad range of organic substrates under natural conditions. There is also increasing interest in photosynthetic MFCs designed to harness Earth's most abundant and promising energy source (solar irradiation). Despite their vast potential and promise, however, MFCs and photosynthetic MFCs have not yet successfully translated into commercial applications because they demonstrate persistent performance limitations and bottlenecks associated with scaling up. Instead, microscale MFCs have received increasing attention as a unique platform for various applications such as powering small portable electronic elements in remote locations, performing fundamental studies of microorganisms, screening bacterial strains, and toxicity detection in water. Furthermore, the stacking of miniaturized MFCs has been demonstrated to offer larger power densities than a single macroscale MFC in terms of scaling up. In this overview, we discuss recent achievements in microscale MFCs as well as their potential applications. Further scientific and technological challenges are also reviewed.

Reactor concepts for bioelectrochemical syntheses and energy conversion.

In bioelectrochemical systems (BESs) at least one electrode reaction is catalyzed by microorganisms or isolated enzymes. One of the existing challenges for BESs is shifting the technology towards industrial use and engineering reactor systems at adequate scales. Due to the fact that most BESs are usually deployed in the production of large-volume but low-value products (e.g., energy, fuels, and bulk chemicals), investment and operating costs must be minimized. Recent advances in reactor concepts for different BESs, in particular biofuel cells and electrosynthesis, are summarized in this review including electrode development and first applications on a technical scale. A better understanding of the impact of reactor components on the performance of the reaction system is an important step towards commercialization of BESs.

Miniature biofuel cell as a potential power source for glucose-sensing contact lenses.

A microscale membrane-less biofuel cell, capable of generating electrical energy from human lachrymal liquid, was developed by utilizing the ascorbate and oxygen naturally present in tears as fuel and oxidant. The biodevice is based on three-dimensional nanostructured gold electrodes covered with abiotic (conductive organic complex) and biological (redox enzyme) materials functioning as efficient anodic and cathodic catalysts, respectively. Three-dimensional nanostructured electrodes were fabricated by modifying 100 µm gold wires with 17 nm gold nanoparticles, which were further modified with tetrathiafulvalene-tetracyanoquinodimethane conducting complex to create the anode and with Myrothecium verrucaria bilirubin oxidase to create the biocathode. When operated in human tears, the biodevice exhibited the following characteristics: an open circuit voltage of 0.54 V, a maximal power density of 3.1 µW cm(-2) at 0.25 V and 0.72 µW cm(-2) at 0.4 V, with a stable current density output of over 0.55 µA cm(-2) at 0.4 V for 6 h of continuous operation. These findings support our proposition that an ascorbate/oxygen biofuel cell could be a suitable power source for glucose-sensing contact lenses to be used for continuous health monitoring by diabetes patients.

Recent advances and challenges in the anode architecture and their modifications for the applications of microbial fuel cells.

Microbial fuel cells (MFC), the ergonomic technology connects the liaison of fuel cell architecture and biological resources. Many viable applications like wastewater treatment, biosensors and bioremediation can be made possible with the help of MFCs. This technology is still at its toddler stage and immense works are still in progress to increase the volumetric energy density of MFCs. The overall performance of MFC depends on the cardinal part of the system; anode. A number of anode materials are currently in research to adjudge the better one in terms of the startup time, power output and durability. A wide range of possibilities are now currently available in the fabrication and modification of anode materials to substantially increase the power performances. This review adumbrates the significant requirements of anodes that are essential to be fulfilled, encompasses the aspiring research efforts which have been devoted so far in the anode modification and fabrication strategies to increase the power output, durability and compatibility of the anode interface with the inoculated microorganisms.

Glucose oxidase nanotube-based enzymatic biofuel cells with improved laccase biocathodes.

Glucose/O(2) biofuel cells (BFCs) with an improved power density and stability were developed, using glucose oxidase (GOD) nanotubes with polypyrrole (PPy)-carbon nanotubes (CNTs)-GOD layers deposited on their surface as an anode and a PPy-laccase-2,2'-azinobis (3-ethylbenzothiazoline-6-sulfonate) diammonium salt (ABTS) film type cathode. The GOD nanotubes were fabricated within the nanopores of an anodized aluminum oxide membrane using a template-assisted layer-by-layer deposition method. These BFCs exhibited a higher volumetric power than the best performance reported previously; this was likely due to an increase in enzyme loading of GOD nanotubes and improved electrochemical properties of the PPy-CNTs-GOD layers. The stability of BFCs was closely related to the leakage of ABTS from the cathode. When the leakage of ABTS was suppressed, the power density of BFCs was nearly unchanged for at least 8 days under physiological conditions.

[Application of microbial fuel cell (MFC) in solid waste composting].

Microbial fuel cell (MFC) is a new technology that can recover energy from biomass with simultaneous waste treatment. This technique has been developed fast in recent years in combining with environmental techniques such as wastewater treatment, degradation of toxic pollutants and desalination. With the increase of solid waste, applying MFC in composting is promising due to its property of waste disposal with simultaneous energy generation. In this paper, the microbial community of MFCs during composting was summarized. Four major influencing factors including electrodes, separators, oxygen supplement and configurations on the performance of composting MFCs were discussed. The characteristics of composting MFC as a new technique for reducing solid waste were as follows: high microbial biomass resulted in the high current density; adaptable to different environmental conditions; self-adjustable temperature with high energy efficiency; the transportation of proton from anode to cathode were limited by different solid substrates.

Urine utilisation by microbial fuel cells; energy fuel for the future.

This communication reports for the first time the direct utilisation of urine in MFCs for the production of electricity. Different conversion efficiencies were recorded, depending on the amount treated. Elements such as N, P, K can be locked into new biomass, thus removed from solution, resulting in recycling without environmental pollution.