Membrane-Facilitated Receptor Access and Binding Mechanisms of Long-Acting ß2-Adrenergic Receptor Agonists.

The drugs salmeterol, formoterol, and salbutamol constitute the frontline treatment of asthma and other chronic pulmonary diseases. These drugs activate the ß2-adrenergic receptors (ß2-AR), a class A G protein-coupled receptor (GPCR), and differ significantly in their clinical onset and duration of actions. According to the microkinetic model, the long duration of action of salmeterol and formoterol compared with salbutamol were attributed, at least in part, to their high lipophilicity and increased local concentrations in the membrane near the receptor. However, the structural and molecular bases of how the lipophilic drugs reach the binding site of the receptor from the surrounding membrane remain unknown. Using a variety of classic and enhanced molecular dynamics simulation techniques, we investigated the membrane partitioning characteristics, binding, and unbinding mechanisms of the ligands. The obtained results offer remarkable insight into the functional role of membrane lipids in the ligand association process. Strikingly, salmeterol entered the binding site from the bilayer through transmembrane helices 1 and 7. The entry was preceded by membrane-facilitated rearrangement and presentation of its phenyl-alkoxy-alkyl tail as a passkey to an access route gated by F193, a residue known to be critical for salmeterol's affinity. Formoterol's access is through the aqueous path shared by other ß2-AR agents. We observed a novel secondary path for salbutamol that is distinct from its primary route. Our study offers a mechanistic description for the membrane-facilitated access and binding of ligands to a membrane protein and establishes a groundwork for recognizing membrane lipids as an integral component in the molecular recognition process. SIGNIFICANCE STATEMENT: The cell membrane's functional role behind the duration of action of long-acting ß2-adrenergic receptor (ß2-AR) agonists such as salmeterol has been a subject of debate for a long time. This study investigated the binding and unbinding mechanisms of the three commonly used ß2-AR agonists, salmeterol, formoterol, and salbutamol, using advanced simulation techniques. The obtained results offer unprecedented insights into the active role of membrane lipids in facilitating access and binding of the ligands, affecting the molecular recognition process and thus their pharmacology.

Molecular basis of ß-arrestin coupling to formoterol-bound ß1-adrenoceptor.

The ß1-adrenoceptor (ß1AR) is a G-protein-coupled receptor (GPCR) that couples1 to the heterotrimeric G protein Gs. G-protein-mediated signalling is terminated by phosphorylation of the C terminus of the receptor by GPCR kinases (GRKs) and by coupling of ß-arrestin 1 (ßarr1, also known as arrestin 2), which displaces Gs and induces signalling through the MAP kinase pathway2. The ability of synthetic agonists to induce signalling preferentially through either G proteins or arrestins-known as biased agonism3-is important in drug development, because the therapeutic effect may arise from only one signalling cascade, whereas the other pathway may mediate undesirable side effects4. To understand the molecular basis for arrestin coupling, here we determined the cryo-electron microscopy structure of the ß1AR-ßarr1 complex in lipid nanodiscs bound to the biased agonist formoterol5, and the crystal structure of formoterol-bound ß1AR coupled to the G-protein-mimetic nanobody6 Nb80. ßarr1 couples to ß1AR in a manner distinct to that7 of Gs coupling to ß2AR-the finger loop of ßarr1 occupies a narrower cleft on the intracellular surface, and is closer to transmembrane helix H7 of the receptor when compared with the C-terminal α5 helix of Gs. The conformation of the finger loop in ßarr1 is different from that adopted by the finger loop of visual arrestin when it couples to rhodopsin8. ß1AR coupled to ßarr1 shows considerable differences in structure compared with ß1AR coupled to Nb80, including an inward movement of extracellular loop 3 and the cytoplasmic ends of H5 and H6. We observe weakened interactions between formoterol and two serine residues in H5 at the orthosteric binding site of ß1AR, and find that formoterol has a lower affinity for the ß1AR-ßarr1 complex than for the ß1AR-Gs complex. The structural differences between these complexes of ß1AR provide a foundation for the design of small molecules that could bias signalling in the ß-adrenoceptors.

Medication Tracking: Design and Fabrication of a Dry Powder Inhaler with Integrated Acoustic Element by 3D Printing.

PURPOSE: Asthma is a prevalent lung disorder that cause heavy burdens globally. Inhalation medicaments can relieve symptoms, improve lung function and, thus, the quality of life. However, it is well-documented that patients often do not get the prescribed dose out of an inhaler and the deposition of drug is suboptimal, due to incorrect handling of the device and wrong inhalation technique. This study aims to design and fabricate an acoustic dry powder inhaler (ADPI) for monitoring inhalation flow and related drug administration in order to evaluate whether the patient receives the complete dose out of the inhaler. METHODS: The devices were fabricated using 3D printing and the impact of the acoustic element geometry and printing resolution on the acoustic signal was investigated. Commercial Foradil (formoterol fumarate) capsules were used to validate the availability of the ADPI for medication dose tracking. The acoustic signal was analysed with Partial-Least-Squares (PLS) regression. RESULTS: Indicate that specific acoustic signals could be generated at different air flow rates using a passive acoustic element with specific design features. This acoustic signal could be correlated with the PLS model to the air flow rate. A more distinct sound spectra could be acquired at higher printing resolution. The sound spectra from the ADPI with no capsule, a full capsule and an empty capsule are different which could be used for medication tracking. CONCLUSIONS: This study shows that it is possible to evaluate the medication quality of inhaled medicaments by monitoring the acoustic signal generated during the inhalation process.

Stereoselective cell uptake of adrenergic agonists and antagonists by organic cation transporters.

Stereoselectivity is well described for receptor binding and enzyme catalysis, but so far has only been scarcely investigated in carrier-mediated membrane transport. We thus studied transport kinetics of racemic (anti)adrenergic drugs by the organic cation transporters OCT1 (wild-type and allelic variants), OCT2, OCT3, MATE1, and MATE2-K with a focus on stereospecificity. OCT1 showed stereoselective uptake with up to 2-fold higher vmax over their corresponding counterpart enantiomers for (R,R)-fenoterol, (R,R)-formoterol, (S)-salbutamol, (S)-acebutolol, and (S)-atenolol. Orciprenaline and etilefrine were also transported stereoselectively. The Km was 2.1-fold and 1.5-fold lower for the (S,S)-enantiomers of fenoterol and formoterol, while no significant difference in Km was seen for the other aforementioned drugs. Common OCT1 variants showed similar enantiopreference to wild-type OCT1, with a few notable exceptions (e.g. a switch in enantiospecificity for fenoterol in OCT1*2 compared to the wild-type). Other cation transporters showed strong differences to OCT1 in stereoselectivity and transport activity: The closely related OCT2 displayed a 20-fold higher vmax for (S,S)-fenoterol compared to (R,R)-fenoterol and OCT2 and OCT3 showed 3.5-fold and 4.6-fold higher vmax for the pharmacologically active (R)-salbutamol over (S)-salbutamol. MATE1 and MATE2-K generally mediated transport with a higher capacity but lower affinity compared to OCT1, with moderate stereoselectivity. Our kinetic studies showed that significant stereoselectivity exists in solute carrier-mediated membrane transport of racemic beta-adrenergic drugs with surprising, and in some instances even opposing, preferences between closely related organic cation transporters. This may be relevant for drug therapy, given the strong involvement of these transporters in hepatic and renal drug elimination.

New developments in optimizing bronchodilator treatment of COPD: a focus on glycopyrrolate/formoterol combination formulated by co-suspension delivery technology.

COPD causes considerable health and economic burden worldwide, with incidence of the disease expected to continue to rise. Inhaled bronchodilators, such as long-acting muscarinic antagonists (LAMAs) and long-acting ß2-agonists (LABAs), are central to the maintenance treatment of patients with COPD. Clinical studies have demonstrated that combined LAMA + LABA therapies improve efficacy while retaining a safety profile similar to LAMA or LABA alone. This has led to the development of several LAMA/LABA fixed-dose combination (FDC) therapies, which provide patients with the convenience of two active compounds in a single inhaler. GFF MDI (Bevespi Aerosphere®) is an FDC of glycopyrrolate/formoterol fumarate 18/9.6 µg formulated using innovative co-suspension delivery technology for administration via metered dose inhaler (MDI). GFF MDI was developed to make a treatment option available for patients who have a requirement or preference to use an MDI, rather than a dry powder or soft mist inhaler. Now that several LAMA/LABA FDCs have been approved for use in COPD, we review the impact of dual-bronchodilator treatment on COPD therapy and discuss recent clinical studies that are helping to develop a more comprehensive understanding of how LAMA/LABA FDCs can improve patient outcomes.

The efficacy of extrafine beclomethasone dipropionate-formoterol fumarate in COPD patients who are not "frequent exacerbators": a post hoc analysis of the FORWARD study.

The GOLD 2017 strategy document recommends that the pharmacological management of COPD patients be based on the risk of future exacerbations and the severity of symptoms. A threshold of two moderate exacerbations or one hospitalization is used to define high-risk patients. The FORWARD study was a randomized, double-blind, parallel-group trial that compared 48 weeks' treatment with extrafine beclomethasone dipropionate plus formoterol fumarate (BDP-FF) versus FF in severe COPD patients with a history of one or more exacerbations in the previous year. The new GOLD 2017 recommendations mean that many patients in the FORWARD study are now reclassified as GOLD B. We conducted a post hoc analysis of the FORWARD study, in order to investigate the effects of extrafine BDP/FF in patients with one exacerbation in the previous year, focusing on those categorized as group B using the GOLD 2017 definition. The analysis showed a 35% reduction in exacerbation rate with an inhaled corticosteroid (ICS) + long-acting ß-agonist (LABA) versus LABA. We propose that ICS-LABA treatment is a therapeutic option for COPD patients with one exacerbation in the previous year.

Simultaneous Determination of Formoterol Fumarate and Budesonide Epimers in Metered Dose Inhaler Using Ion-Pair Chromatography.

A simple, accurate and valid ion-pairing chromatographic method was developed for the simultaneous determination of formoterol fumarate (FF) and budesonide (BUD) epimers in metered dose inhaler. The separation was performed on C-18 column using mobile phase consisting of acetonitrile:0.05 M sodium acetate buffer (40:60% v/v) containing 0.03% sodium dodecyl sulfate adjusted to pH 3.1 using increasing volumes of either TEA or orthophosphoric acid isocratically eluted at 1.0 mL/min. Quantitation was achieved with UV detection at 214 nm. The retention times were 3.22, 6.41 and 6.91 min for formoterol fumarate, budesonide epimers B and A, respectively. The linearity range was 0.05-5.0 µg/mL for formoterol fumarate and 0.5-50.0 µg/mL for budesonide. The method was validated for, linearity; lower limit of quantification, lower limit of detection accuracy and precision. The proposed method is rapid (7 min), reproducible (RSD < 2.0%) and achieves satisfactory resolution between FF and BUD B (resolution factor = 12.07). The mean recoveries of the analytes in metered dose inhaler (99.97 and 99.83% for FF and BUD, respectively) were satisfactory.

Structural and pharmacological basis for the induction of mitochondrial biogenesis by formoterol but not clenbuterol.

Mitochondrial dysfunction is associated with numerous acute and chronic degenerative diseases. The beta-2 adrenergic receptor (ß2AR) agonist formoterol induces mitochondrial biogenesis (MB), but other ß2AR agonists, such as clenbuterol, do not. We sought to identify the MB signaling pathway of formoterol and the differences in signaling between these two ligands that result in the differential induction of MB. While formoterol and clenbuterol increased cAMP, only formoterol increased the phosphorylation of Akt and its downstream target eNOS. The increase in Akt phosphorylation was Gßγ- and PI3K-dependent, and the increase in eNOS phosphorylation was Gßγ- and Akt-dependent. Only formoterol increased cGMP. Formoterol induced MB as measured by increases in uncoupled cellular respiration and PGC-1α and NDUFS1 mRNA expression and was blocked by inhibitors of Gßγ, Akt, NOS, and soluble guanylate cyclase. To identify distinct receptor-ligand interactions leading to these differences in signaling, we docked formoterol and clenbuterol to six structures of the ß2AR. Compared to clenbuterol, the methoxyphenyl group of formoterol interacted more frequently with V114 and F193, while its formamide group interacted more frequently with C191. These data indicate that the unique structural features of formoterol allow it to interact with the ß2AR to activate the Gßγ-Akt-eNOS-sGC pathway to induce MB.

Experimental and computational study of the effect of breath-actuated mechanism built in the NEXThaler® dry powder inhaler.

The breath-actuated mechanism (BAM) is a mechanical unit included in NEXThaler® with the role of delaying the emission of the drug until the inhalation flow rate of the patient is sufficiently high to detach the drug particles from their carriers. The main objective of this work was to analyse the effect of the presence of BAM on the size distribution of the emitted drug and its airway deposition efficiency and distribution. Study of the hygroscopic growth of the emitted drug particles and its effect on the deposition was another goal of this study. Size distributions of Foster® NEXThaler® drug particles emitted by dry powder inhalers with and without BAM have been measured by a Next Generation Impactor. Three characteristic inhalation profiles of asthmatic patients (low, moderate and high flow rates) were used for both experimental and modelling purposes. Particle hygroscopic growth was determined by a new method, where experimental measurements are combined with simulations. Upper airway and lung deposition fractions were computed assuming 5s and 10s breath-hold times. By the inclusion of BAM the fine particle fraction of the steroid component increased from 24 to 30% to 47-51%, while that of bronchodilator from 25-34% to 52-55%. The predicted upper airway steroid and bronchodilator doses decreased from about 60% to 35-40% due to BAM. At the same time, predicted lung doses increased from about 20%-35% (steroid) and from 22% to 38% (bronchodilator) for the moderate flow profile and from about 25% to 40% (steroid) and from 29% to 47% (bronchodilator) for the high inhalation flow profile. Although BDP and FF upper airway doses decreased by a factor of about two when BAM was present, lung doses of both components were about the same in the BAM and no-BAM configurations at the weakest flow profile. However, lung dose increased by 2-3% even for this profile when hygroscopic growth was taken into account. In conclusion, the NEXThaler® BAM mechanism is a unique feature enabling high emitted fine particle fraction and enhanced drug delivery to the lungs.

Interactions between ß2-Adrenoceptor Ligands and Membrane: Atomic-Level Insights from Magic-Angle Spinning NMR.

To understand the relationship between structural properties of the ß2-adrenoceptor ligands and their interactions with membranes, we have investigated the location and distribution of five ß2 agonists with distinct clinical durations and onsets of action (indacaterol, two indacaterol analogues, salmeterol and formoterol) in monounsaturated model membranes using magic angle spinning NMR to measure these interactions through both 1H nuclear Overhauser enhancement (NOE) and paramagnetic relaxation enhancement (PRE) techniques. The hydrophilic aromatic groups of all five ß2 agonists show maximum distribution in the lipid/water interface, but distinct location and dynamic behavior were observed for the lipophilic aromatic rings. Our study elucidates at atomic level that the hydrophobicity and substitution geometry of lipophilic groups play important roles in compound-lipid interactions.

Nano- and Microstructured model carrier surfaces to alter dry powder inhaler performance.

The present study investigates the effect of different carrier surface modifications on the aerosolisation performance and on the effective carrier payload of interactive blends for inhalation. Two different active pharmaceutical ingredients (APIs) were used: Formoterol fumarate dihydrate (FF) and budesonide (BUD). Blends were prepared with glass beads as model carriers which have been subjected to mechanical surface modifications in order to introduce surface roughness via treatment with hydrofluoric acid (HF) and/or milling with tungsten carbide (TC). As far as effective carrier payload, in this study expressed as true surface coverage (TSC), is concerned, surface modification had varying effects on blends containing BUD or FF. Aerodynamic characterisation in vitro showed a significant decrease in respirable fraction for glass beads treated with HF (40.2-50.1%), due to the presence of clefts and cavities, where drug particles were sheltered during inhalation. In contrast, grinding with TC leads to surface roughness on a nano scale, ultimately increasing aerodynamic performance up to 20.0-38.1%. These findings are true for both APIs, regardless of their chemical properties.

Evaluation of Abbreviated Impactor Measurements (AIM) and Efficient Data Analysis (EDA) for Dry Powder Inhalers (DPIs) Against the Full-Resolution Next Generation Impactor (NGI).

The full-resolution next generation impactor (NGI) and three abbreviated impactor systems were used to obtain the apparent aerodynamic particle size distribution (APSD) and other quality measures for marketed dry powder inhalers (DPIs) using the compendial method and efficient data analysis (EDA). APSD for the active pharmaceutical ingredient (API) in Spiriva® Handihaler®, Foradil® Aerolizer®, and Relenza® Diskhaler® was obtained using a full-resolution NGI at 39, 60, and 90 L/min, respectively. Two reduced NGI (rNGI) configurations, the filter-only configuration (rNGI-f) and the modified-cup configuration (rNGI-mc), and the fast-screening impactor (FSI) with appropriate inserts to provide a 5-µm cut size were evaluated. The fine particle dose (FPD) obtained using the FSI for Spiriva was statistically similar to that obtained using the full NGI. However, the FPD for both Foradil and Relenza obtained using the FSI was significantly different from that obtained using the full NGI. Despite this, no significant differences were observed for the fine particle fraction (FPF) obtained using the FSI relative to that obtained from the full NGI for any of the DPIs. The use of abbreviated impactor systems appears promising with good agreement observed with the full-resolution NGI, except for small differences observed for the rNGI-mc configuration. These small differences may be product- and/or flow rate-specific, and further evaluation will be required to resolve these differences.

Preparation of yolk-shell structured copper oxide@silica oxide spheres and their application in high performance electrochemical sensing of Formoterol fumarate residues in swine feed and tissues.

In this paper, we report a facile route to synthesize yolk-shell structured copper oxide@silica oxide (CuO@SiO2) spheres and their application to construct an electrochemical Formoterol fumarate (FF) sensor. The CuO@SiO2 was characterized by means of Fourier transform infrared spectroscopy, X-ray powder diffraction, Raman spectroscopy, scanning electron microscopy, and transmission electron microscopy. Further, FF was electrocatalytically oxidized at the CuO@SiO2 film modified glassy carbon electrode (GCE), which led to a sensitive determination of FF. The oxidation current of FF was linear with concentration in the range of 0.030-10 µM and the detection limit was found to be 5.0 nM (S/N = 3). The observed analytical parameters such as wide linear range, low detection limit and short response time were superior to previously reported FF sensors. Finally, it was demonstrated that the proposed sensor could be used for the selective determination of FF present in swine feed and tissues.

The effects of extrafine beclometasone/formoterol (BDP/F) on lung function, dyspnea, hyperinflation, and airway geometry in COPD patients: novel insight using functional respiratory imaging.

BACKGROUND: The efficacy of inhaled corticosteroids (ICS) in moderately severe COPD patients remains unclear. At the same time, the use of extrafine particles in COPD patients is a topic of ongoing research. OBJECTIVES: This study assessed the effect of ICS in steroid-naïve mild COPD patients and the effect of reducing the ICS dose in more severe COPD patients previously using ICS when switching to an extrafine particle BDP/F formulation (Foster using Modulite technology, Chiesi Pharmaceutici, Parma, Italy). METHODS: Novel functional respiratory imaging (FRI) methods, consisting of multi-slice CT scans and Computational Fluid Dynamics, were used in combination with conventional pulmonary function tests and patient reported outcomes. RESULTS: The study showed that the administration of extrafine BDP/F after 4-6 h led to a significant improvement in lung function parameters and hyperinflation as determined by spirometry, body plethysmography, and functional respiratory imaging. After 6 months of treatment, it was observed that, compared to baseline, the hyperinflation on lobar level at total lung capacity was significantly reduced (-1.19±7.19 %p, p=0.009). In addition, a significant improvement in SGRQ symptom score was noted in the entire patient population. Patients who improved in terms of hyperinflation also improved their MMRC dyspnea score. CFD indicated a difference in regional deposition between extrafine and non-extrafine formulations with -11% extrathoracic deposition and up to +4% lobe deposition for the extrafine formulation. CONCLUSIONS: The study showed that the administration of extrafine BDP/F improved lung function parameters and hyperinflation. Patients previously treated with ICS remained stable despite the lower dose, while ICS naïve patients improved in terms of lobar hyperinflation. FRI seems to be a sensitive biomarker to detect clinically relevant changes that are not detected by spirometry. The next step is to confirm these findings in a controlled trial.

The effect of beclometasone dipropionate/formoterol extra-fine fixed combination on the peripheral airway inflammation in controlled asthma.

BACKGROUND: Suppression of small airway inflammation may contribute to achieving asthma control. We aimed to evaluate the additional effect of beclometasone dipropionate/formoterol (BDP/F) hydrofluoroalkane (HFA) pressurized metered dose inhaler (pMDI) (BDP/F-HFA 100/6 µg pMDI) on airway inflammation and functional parameters in asthma cases, who were optimally controlled by maintenance therapy. METHODS: Ninety-five controlled asthmatic patients were included. They were grouped as Group 1 [budesonide/formoterol 320/9 µg dry powder inhaler (DPI)] and Group 2 (fluticasone/salmeterol 500/50 µg DPI) according to the combination they used. Then Group 3 was established by random selection from these two groups, and BDP/F-HFA 100/6 µg pMDI treatment was prescribed. All patients were evaluated in the beginning of the study and were re-evaluated at the end of a 3-week treatment period by spirometry, exhaled nitric oxide (eNO) levels, and small airway functional indices, namely, Sacin and Scond values. RESULTS: There was no significant statistical difference in terms of age, height, weight, disease duration, symptoms, and spirometric parameters between the groups. There was a significant decrease in eNO levels in asthma cases who were on BDP/F-HFA therapy (p=0.001). A significant improvement in Sacin values at the end of the treatment period was observed in cases treated with BDP/F-HFA (p=0.001), indicating that inflammation was suppressed in peripheral airways. CONCLUSIONS: These results emphasize that asthma treatment has mainly focused on the strategy to keep the disease under control; maintaining optimal functional level might be underestimated. BDP/F-HFA may have an additional favorable effect on the peripheral airway inflammation in the controlled asthma.