Polyglucosan body structure in Lafora disease.

Abnormal carbohydrate structures known as polyglucosan bodies (PGBs) are associated with neurological disorders, glycogen storage diseases (GSDs), and aging. A hallmark of the GSD Lafora disease (LD), a fatal childhood epilepsy caused by recessive mutations in the EPM2A or EPM2B genes, are cytoplasmic PGBs known as Lafora bodies (LBs). LBs result from aberrant glycogen metabolism and drive disease progression. They are abundant in brain, muscle and heart of LD patients and Epm2a-/- and Epm2b-/- mice. LBs and PGBs are histologically reminiscent of starch, semicrystalline carbohydrates synthesized for glucose storage in plants. In this study, we define LB architecture, tissue-specific differences, and dynamics. We propose a model for how small polyglucosans aggregate to form LBs. LBs are very similar to PGBs of aging and other neurological disorders, and so these studies have direct relevance to the general understanding of PGB structure and formation.

Structural characterization of mixed-linkage α-glucans produced by mutants of Lactobacillus reuteri TMW 1.106 dextransucrase.

Dextrans and other bacterial α-glucans are versatile and structurally diverse polysaccharides which can be enzymatically synthesized by using glucansucrases. By substituting certain amino acids in the active site of these enzymes, the structure of the synthesized polysaccharides can be modified. In this study, such amino acid substitutions were applied (single and combined) to the dextransucrase from Lactobacillus reuteri TMW 1.106 and the structures of the synthesized polysaccharides were subsequently characterized in detail. Besides methylation analysis, α-glucans were hydrolyzed by several glycoside hydrolases and the liberated oligosaccharides were identified by comparison to standard compounds or by isolation and NMR spectroscopic characterization. Furthermore, two-dimensional NMR spectroscopy was used to analyze the untreated polysaccharides. The results demonstrated that structurally different α-glucans were formed, for example different highly O4-branched dextrans or several reuteran-like polymers with varying fine structures. Consequently, mutant Lactobacillus reuteri TMW 1.106 dextransucrases can be used to form structurally unique polysaccharides.

Synthesis and characterization of a non-cytotoxic and biocompatible acrylamide grafted pullulan - Application in pH responsive controlled drug delivery.

The aim of present study was to develop a pH responsive rate controlling polymer by acrylamide grafting onto pullulan. Grafting was performed using free radical induced microwave assisted irradiation technique using ceric ammonium nitrate as free radical inducer. Acrylamide grafted pullulan (Aam-g-pull) was characterized by Fourier transform infrared spectroscopy, solid state 13C nuclear magnetic resonance and field emission scanning electron microscopy. In vitro enzymatic degradation of Aam-g-pull showed degradation of 22.45% after 8 h with degradation rate constant (k) of 0.019 min-1. In vitro cytotoxicity test did not show cell viability below 80% on HepG2 cell line. Pirfenidone tablets were prepared by utilizing wet granulation method using Aam-g-pull as the only rate controlling polymer. The tablets were characterized in terms of in-process quality control parameters like weight variation, hardness, assay, and in vitro dissolution study. The dissolution study showed that the cumulative drug release in phosphate buffer pH 6.8 (rel3 h = 44.12 ±â€¯0.56%) got a significant jump as compared to the release in 0.1 N hydrochloric acid (rel2 h = 26.78 ±â€¯0.23%), confirming the material to be pH responsive. Aam-g-pull can be used as pH responsive rate controlling polymer.

Pullulan-alginate fibers produced using free surface electrospinning.

Pullulan-alginate ultrafine fibers, with and without CaCl2, were electrospun from aqueous polymer solutions using a free-surface electrospinning method, without the use of synthetic spinning aid polymer. Aqueous pullulan solution (10%, w/w) could be electrospun into beaded fibers of 110 nm in diameter with a board diameter distribution. By contrast, continuous and smooth fibers were formed when 0.8 to 1.6% (w/w) alginate was added to the 10% (w/w) pullulan solutions, producing smaller fibers ranging from 87 to 57 nm in diameter. The positive effect of alginate can be attributed to the increase in polymer chain entanglement, as well as enhanced hydrogen bonding interaction between pullulan and alginate. The addition of trace amount of CaCl2 (up to 0.045%, w/w) resulted in smooth and ultrafine fibers that were significantly smaller in diameter and greater thermal stability than those prepared without the addition of CaCl2. The production of typical electrospun fibers involves the use of undesirable organic solvents and/or non-food grade synthetic spinning aid polymer. The water-based edible biopolymer systems presented in this study can be useful for the preparation of nano-scale fibers that are more conducive for food, nutraceutical, and pharmaceutical applications.

Xyloglucan is released by plants and promotes soil particle aggregation.

Soil is a crucial component of the biosphere and is a major sink for organic carbon. Plant roots are known to release a wide range of carbon-based compounds into soils, including polysaccharides, but the functions of these are not known in detail. Using a monoclonal antibody to plant cell wall xyloglucan, we show that this polysaccharide is secreted by a wide range of angiosperm roots, and relatively abundantly by grasses. It is also released from the rhizoids of liverworts, the earliest diverging lineage of land plants. Using analysis of water-stable aggregate size, dry dispersion particle analysis and scanning electron microscopy, we show that xyloglucan is effective in increasing soil particle aggregation, a key factor in the formation and function of healthy soils. To study the possible roles of xyloglucan in the formation of soils, we analysed the xyloglucan contents of mineral soils of known age exposed upon the retreat of glaciers. These glacial forefield soils had significantly higher xyloglucan contents than detected in a UK grassland soil. We propose that xyloglucan released from plant rhizoids/roots is an effective soil particle aggregator and may, in this role, have been important in the initial colonization of land.

Xyloglucan in the primary cell wall: assessment by FESEM, selective enzyme digestions and nanogold affinity tags.

Xyloglucan has been hypothesized to bind extensively to cellulose microfibril surfaces and to tether microfibrils into a load-bearing network, thereby playing a central role in wall mechanics and growth, but this view is challenged by newer results. Here we combined high-resolution imaging by field emission scanning electron microscopy (FESEM) with nanogold affinity tags and selective endoglucanase treatments to assess the spatial location and conformation of xyloglucan in onion cell walls. FESEM imaging of xyloglucanase-digested cell walls revealed an altered microfibril organization but did not yield clear evidence of xyloglucan conformations. Backscattered electron detection provided excellent detection of nanogold affinity tags in the context of wall fibrillar organization. Labelling with xyloglucan-specific CBM76 conjugated with nanogold showed that xyloglucans were associated with fibril surfaces in both extended and coiled conformations, but tethered configurations were not observed. Labelling with nanogold-conjugated CBM3, which binds the hydrophobic surface of crystalline cellulose, was infrequent until the wall was predigested with xyloglucanase, whereupon microfibril labelling was extensive. When tamarind xyloglucan was allowed to bind to xyloglucan-depleted onion walls, CBM76 labelling gave positive evidence for xyloglucans in both extended and coiled conformations, yet xyloglucan chains were not directly visible by FESEM. These results indicate that an appreciable, but still small, surface of cellulose microfibrils in the onion wall is tightly bound with extended xyloglucan chains and that some of the xyloglucan has a coiled conformation.

Molecular basis of substrate recognition and specificity revealed in family 12 glycoside hydrolases.

Fungal GH12 enzymes are classified as xyloglucanases when they specifically target xyloglucans, or promiscuous endoglucanases when they exhibit catalytic activity against xyloglucan and ß-glucan chains. Several structural and functional studies involving GH12 enzymes tried to explain the main patterns of xyloglucan activity, but what really determines xyloglucanase specificity remains elusive. Here, three fungal GH12 enzymes from Aspergillus clavatus (AclaXegA), A. zonatus (AspzoGH12), and A. terreus (AtEglD) were studied to unveil the molecular basis for substrate specificity. Using functional assays, site-directed mutagenesis, and molecular dynamics simulations, we demonstrated that three main regions are responsible for substrate selectivity: (i) the YSG group in loop 1; (ii) the SST group in loop 2; and (iii) loop A3-B3 and neighboring residues. Functional assays and sequence alignment showed that while AclaXegA is specific to xyloglucan, AtEglD cleaves ß-glucan, and xyloglucan. However, AspzoGH12 was also shown to be promiscuous contrarily to a sequence alignment-based prediction. We find that residues Y111 and R93 in AtEglD harbor the substrate in an adequate orientation for hydrolysis in the catalytic cleft entrance and that residues Y19 in AclaXegA and Y30 in AspzoGH12 partially compensate the absence of the YSG segment, typically found in promiscuous enzymes. The results point out the multiple structural factors underlying the substrate specificity of GH12 enzymes. Biotechnol. Bioeng. 2016;113: 2577-2586. © 2016 Wiley Periodicals, Inc.

Expression of Escherichia coli glycogen branching enzyme in an Arabidopsis mutant devoid of endogenous starch branching enzymes induces the synthesis of starch-like polyglucans.

Starch synthesis requires several enzymatic activities including branching enzymes (BEs) responsible for the formation of α(1 → 6) linkages. Distribution and number of these linkages are further controlled by debranching enzymes that cleave some of them, rendering the polyglucan water-insoluble and semi-crystalline. Although the activity of BEs and debranching enzymes is mandatory to sustain normal starch synthesis, the relative importance of each in the establishment of the plant storage polyglucan (i.e. water insolubility, crystallinity and presence of amylose) is still debated. Here, we have substituted the activity of BEs in Arabidopsis with that of the Escherichia coli glycogen BE (GlgB). The latter is the BE counterpart in the metabolism of glycogen, a highly branched water-soluble and amorphous storage polyglucan. GlgB was expressed in the be2 be3 double mutant of Arabidopsis, which is devoid of BE activity and consequently free of starch. The synthesis of a water-insoluble, partly crystalline, amylose-containing starch-like polyglucan was restored in GlgB-expressing plants, suggesting that BEs' origin only has a limited impact on establishing essential characteristics of starch. Moreover, the balance between branching and debranching is crucial for the synthesis of starch, as an excess of branching activity results in the formation of highly branched, water-soluble, poorly crystalline polyglucan.

Polysaccharide nanofiber made from euglenoid alga.

We have fabricated a polysaccharide nanofiber made from paramylon (ß-1,3-glucan), a storage polysaccharide stored as a micrometer-sized particle in the cell of euglenoid alga. Preparation of this nanofiber primarily hinges on the bottom-up approach. First, paramylon, which is originally present in the form of a bundle of nanofibers in a particle, was fibrillated to a randomly coiled polymer by dissolving the particle in a 1.0-mol/L NaOH aqueous solution. Second, the randomly coiled polymer was allowed to self-assemble into a triplex as the NaOH concentration was reduced to 0.25-0.20mol/L. Third, a 20-nm-width nanofiber made from the triplex emerged in the solution when the NaOH concentration was reduced to approximately 0.20mol/L.

In vitro synthesis of hyperbranched α-glucans using a biomimetic enzymatic toolbox.

Glycogen biosynthesis requires the coordinated action of elongating and branching enzymes, of which the synergetic action is still not clearly understood. We have designed an experimental plan to develop and fully exploit a biomimetic system reproducing in vitro the activities involved in the formation of α(1,4) and α(1,6) glycosidic linkages during glycogen biosynthesis. This method is based on the use of two bacterial transglucosidases, the amylosucrase from Neisseria polysaccharea and the branching enzyme from Rhodothermus obamensis . The α-glucans synthesized from sucrose, a low cost agroresource, by the tandem action of the two enzymes, have been characterized by using complementary enzymatic, chromatographic, and imaging techniques. In a single step, linear and branched α-glucans were obtained, whose proportions, morphology, molar mass, and branching degree depended on both the initial sucrose concentration and the ratio between elongating and branching enzymes. In particular, spherical hyperbranched α-glucans with a controlled mean diameter (ranging from 10 to 150 nm), branching degree (from 10 to 13%), and weight-average molar mass (3.7 × 10(6) to 4.4 × 10(7) g.mol(-1)) were synthesized. Despite their structure, which is similar to that of natural glycogens, the mechanisms involved in their in vitro synthesis appeared to be different from those involved in the biosynthesis of native hyperbranched α-glucans.

Physicochemical variation of cyanobacterial starch, the insoluble α-Glucans in cyanobacteria.

Unicellular, diazotrophic species of cyanobacteria, Cyanobacterium sp. NBRC 102756, Cyanothece sp. ATCC 51142 and Cyanobacterium sp. CLg1, accumulate insoluble α-glucan inside the cells as the storage polysaccharide. The purified polysaccharides showed granular morphology, with a diameter of 0.2-0.7 µm. The three α-glucan preparations all showed A-type allomorph in X-ray diffraction analysis. Distinct thermal gelatinization temperatures were observed for these polysaccharides. The α-glucans from NBRC 102756 and ATCC 51142 strains consisted solely of branched α-glucans, or semi-amylopectin, while CLg1 contained semi-amylopectin as the primary component as well as linear or scarcely branched glucan (amylose). Separation of the debranched glucan chains by gel filtration chromatography explicitly showed the presence in the semi-amylopectin molecule of long chains corresponding to B2 chains, which connect clusters in amylopectin of plants. The relative proportions of short and long glucan chains in the branched polysaccharides differed depending on the species, and the variation was intimately correlated with the physical properties of the α-glucans. The results suggested that semi-amylopectin of the three cyanobacteria exhibit essentially similar organization with a tandem cluster structure. The polysaccharides of these strains are therefore referred to as 'cyanobacterial starch', distinct from glycogen.

Networks of polysaccharides with hydrophilic and hydrophobic characteristics in the presence of co-solute.

The present investigation deals with the changing network morphology of agarose and high methoxy pectin when mixed with polydextrose as co-solute at concentrations varying up to high level of solids. Thermomechanical analysis and micro-imaging were performed using small deformation dynamic oscillation in shear, modulated differential scanning calorimetry and environment scanning electron microscopy. Fourier transform infrared spectroscopy and wide angle X-ray diffraction were practised to examine the nature of interactions between polymer and co-solute, and the extent of amorphicity of preparations. We observed a decline in the mechanical strength of aqueous agarose preparations upon addition of high levels of polydextrose, which should be attributed to reduced enthalpic content of the coil-to-helix transition of the polysaccharide network. Glass transition phenomena were observed at subzero temperatures in condensed preparations, hence further arguing for the formation of a lightly cross-linked agarose network with changing solvent quality. High levels of co-solute induce formation of weak pectin gels at elevated temperatures (even at 95°C), which with lowering temperature exhibit increasing strength. This results in the formation of rubbery pectin gels at ambient temperature, which upon controlled cooling to subzero temperatures convert to a clear glass earlier than the agarose counterparts.

Chitin-glucan complex production by Schizophyllum commune submerged cultivation.

Chitin-glucan complex is a fungal origin copolymer that finds application in medicine and cosmetics. Traditionally, the mycelium of Micromycetes is considered as an industrial chitin-glucan complex source. Basidiomycete Schizophyllum commune submerged cultivation for chitin-glucan complex production was studied. In different S. commune strains chitin-glucan complex composed 15.2 +/- 0.4 to 30.2 +/- 0.2% of mycelium dry weight. Optimized conditions for chitin-glucan complex production (nutrient medium composition in g/l: sucrose - 35, yeast extract - 4, Na2HPO4*12H2O - 2.5, MgSO4*7 H2O - 0.5; medium initial pH 6.5; aeration intensity 21 of air per 11 of medium; 144 hours of cultivation) resulted in 3.5 +/- 0.3 g/l complex yield. Redirection of fungal metabolism from exopolysaccharide synthesis to chitin-glucan complex accumulation was achieved most efficiently by aeration intensity increase. Chitin-glucan complex from S. commune had the structure of microfibers with diameter 1-2 microm, had water-swelling capacity of 18 g/g, and was composed of 16.63% chitin and 83.37% glucan with a degree of chitin deacetylation of 26.9%. S. commune submerged cultivation is a potent alternative to Micromycetes for industrial-scale chitin-glucan complex production.

Scanning and negative-staining electron microscopy of protoplast regeneration of a wild-type and two chitin synthase mutants in the pathogenic yeast Candida glabrata.

Protoplast regeneration of a wild-type and two mutant strains of Candida glabrata defective in CHS3 homologues encoding class IV chitin synthase in Saccharomyces cerevisiae was examined by scanning and negative-staining electron microscopy. In the wild-type strain, small particles and short filaments appeared on the protoplast surface at 10 min, filamentous materials covered the entire surface of the protoplast at 1 h, granular materials started filling interspaces of filamentous materials at 2 h and regeneration was completed at 6 h. The filamentous materials consisted of microfibrils of various widths ranging from ≤5 to 40 nm, and composed of ß-glucan. Protoplasts of the two chitin synthase mutant strains of Δchs3A and Δchs3B completed regeneration essentially by the same process as wild-type strain, although it took more time. These results suggest that CHS3A and CHS3B genes may have important roles in cell wall formation during protoplast regeneration, but can be compensated by other cell wall enzymes.

CalS7 encodes a callose synthase responsible for callose deposition in the phloem.

It has been known for more than a century that sieve plates in the phloem in plants contain callose, a ß-1,3-glucan. However, the genes responsible for callose deposition in this subcellular location have not been identified. In this paper we examine callose deposition patterns in T-DNA insertion mutants (cs7) of the Callose Synthase 7 (CalS7) gene. We demonstrated here that the CalS7 gene is expressed specifically in the phloem of vascular tissues. Callose deposition in the phloem, especially in the sieve elements, was greatly reduced in cs7 mutants. Ultrastructural analysis of developing sieve elements revealed that callose failed to accumulate in the plasmodesmata of incipient sieve plates at the early perforation stage of phloem development, resulting in the formation of sieve plates with fewer pores. In wild-type Arabidopsis plants, callose is present as a constituent polysaccharide in the phloem of the stem, and its accumulation can also be induced by wounding. Callose accumulation in both conditions was eliminated in mature sieve plates of cs7 mutants. These results demonstrate that CalS7 is a phloem-specific callose synthase gene, and is responsible for callose deposition in developing sieve elements during phloem formation and in mature phloem induced by wounding. The mutant plants exhibited moderate reduction in seedling height and produced aberrant pollen grains and short siliques with aborted embryos, suggesting that CalS7 also plays a role in plant growth and reproduction.

NaCl effect on the distribution of wall ingrowth polymers and arabinogalactan proteins in type A transfer cells of Medicago sativa Gabès leaves.

We studied the distribution of wall ingrowth (WI) polymers by probing thin sections of companion cells specialized as transfer cells in minor veins of Medicago sativa cv Gabès blade with affinity probes and antibodies specific to polysaccharides and glycoproteins. The wall polymers in the controls were similar in WIs and in the primary wall but differently distributed. The extent of labeling in these papillate WIs differed for JIM5 and JIM7 homogalacturonans but was in the same range for LM5 and LM6 rhamnogalacturonans and xyloglucans. These data show that WI enhancement probably requires arabinogalactan proteins (JIM8) mainly localized on the outer part of the primary wall and WIs. By comparison, NaCl-treated plants exhibited cell wall polysaccharide modifications indicating (1) an increase in unesterified homogalacturonans (JIM5), probably implicated in Na(+) binding and/or polysaccharide network interaction for limiting turgor variations in mesophyll cells; (2) enhancement of the xyloglucan network with an accumulation of fucosylated xyloglucans (CCRC-M1) known to increase the capacity of cellulose binding; and (3) specific recognition of JIM8 arabinogalactan proteins that could participate in both wall enlargement and cohesion by increasing the number of molecular interactions with the other polymers. In conclusion, the cell wall polysaccharide distribution in enlarged WIs might (1) participate in wall resistance to sequestration of Na(+), allowing a better control of hydric homeostasis in mesophyll cells to maintain metabolic activity in source leaves, and (2) maintain tolerance of M. sativa to NaCl.

Scleroglucan-borax hydrogel: a flexible tool for redox protein immobilization.

A highly stable biological film was prepared by casting an aqueous dispersion of protein and composite hydrogel obtained from the polysaccharide Scleroglucan (Sclg) and borax as a cross-linking agent. Heme proteins, such as hemoglobin (Hb), myoglobin (Mb), and horseradish peroxidase (HRP), were chosen as model proteins to investigate the immobilized system. A pair of well-defined quasi-reversible redox peaks, characteristics of the protein heme FeII/FeIII redox couples, were obtained at the Sclg-borax/proteins films on pyrolytic graphite (PG) electrodes, as a consequence of the direct electron transfer between the protein and the PG electrode. A full characterization of the electron transfer kinetic was performed by opportunely modeling data obtained from cyclic voltammetry and square wave voltammetry experiments. The efficiency of our cross-linking approach was investigated by studying the influence of different borax groups percentage in the Sclg matrix, revealing the versatility of this hydrogel in the immobilization of redox proteins. The native conformation of the three heme proteins entrapped in the hydrogel films were proved to be unchanged, reflected by the unaltered Soret adsorption band and by the catalytic activity toward hydrogen peroxide (H2O2). The main kinetic parameters, such as the apparent Michaelis-Menten constant, for the electrocatalytic reaction were also evaluated. The peculiar characteristics of Sclg-borax matrix make it possible to find wide opportunities as proteins immobilizing agent for studies of direct electrochemistry and biosensors development.

Pullulan acetate nanoparticles prepared by solvent diffusion method for epirubicin chemotherapy.

Pullulan acetate (PA) was synthesized by the reaction of pullulan with acetic anhydride in the presence of pyridine. PA was characterized by Fourier transform infrared (FT-IR) and proton nuclear magnetic resonance ((1)H NMR). A solvent diffusion method was employed in the current work to prepare PA nanoparticles. This technique had some advantages compared with other methods. The particle size increased from 185.7 nm to 423.0 nm with the degree of acetylation increasing from 2.71 to 3.0. Drug-loaded PA nanoparticles were prepared for controlled release of epirubicin (EPI). The drug entrapment and drug content increased with the degree substitution of PA increasing. EPI was released from the nanoparticles in a biphasic profile with a fast release rate in the first 10h followed by a slow release in vitro. A higher cytotoxicity against KB cells was found for EPI-loaded PA nanoparticles in comparison with free EPI. Confocal laser scanning microscopy (CLSM) observations indicate that EPI-loaded nanoparticles were internalized and released in the cytoplasmic compartment.

Congenital type IV glycogenosis: the spectrum of pleomorphic polyglucosan bodies in muscle, nerve, and spinal cord with two novel mutations in the GBE1 gene.

A diagnosis of GSD-IV was established in three premature, floppy infants based on characteristic, however unusually pleomorphic polyglucosan bodies at the electron microscopic level, glycogen branching enzyme deficiency in two cases, and the identification of GBE1 mutations in two cases. Pleomorphic polyglucosan bodies in muscle fibers and macrophages, and less severe in Schwann cells and microglial cells were noted. Most of the inclusions were granular and membrane-bound; others had an irregular contour, were more electron dense and were not membrane bound, or homogenous ('hyaline'). A paracrystalline pattern of granules was repeatedly noted showing a periodicity of about 10 nm with an angle of about 60 degrees or 120 degrees at sites of changing linear orientation. Malteser crosses were noted under polarized light in the larger inclusions. Some inclusions were PAS positive and others were not. Severely atrophic muscle fibers without inclusions, but with depletion of myofibrils in the plane of section studied indicated the devastating myopathic nature of the disease. Schwann cells and peripheral axons were less severely affected as was the spinal cord. Two novel protein-truncating mutations (c.1077insT, p.V359fsX16; g.101517_127067del25550insCAGTACTAA, DelExon4-7) were identified in these families. The present findings extend previous studies indicating that truncating GBE1 mutations cause a spectrum of severe diseases ranging from generalized intrauterine hydrops to fatal perinatal hypotonia and fatal cardiomyopathy in the first months of life.