RESUMEN
Diene rubbers are polymeric materials which present elastic properties and have double bonds in the macromolecular backbone after the polymerization process. Post-polymerization modifications of rubbers can be conducted by enzymatic or chemical methods. Enzymes are environmentally friendly catalysts and with the increasing demand for rubber waste management, biodegradation and biomodifications have become hot topics of research. Some rubbers are renewable materials and are a source of organic molecules, and biodegradation can be conducted to obtain either oligomers or monomers. On the other hand, chemical modifications of rubbers by click-chemistry are important strategies for the creation and combination of new materials. In a way to expand the scope of uses to other non-traditional applications, several and effective modifications can be conducted with diene rubbers. Two groups of efficient tools, enzymatic, and chemical modifications in diene rubbers, are summarized in this review. By analyzing stereochemical and reactivity aspects, the authors also point to some applications perspectives for biodegradation products and to rational modifications of diene rubbers by combining both methodologies.
Asunto(s)
Química Clic , Polimerizacion , Goma/química , Goma/síntesis química , Biodegradación AmbientalRESUMEN
The incorporation of the prepared Ag-SiO2 core-shell particles in natural rubber matrix was investigated on antibacterial and mechanical properties of resulting composites. Significant antibacterial effect against S. aureus (Gram positive) and P. aeruginosa (Gram negative) was observed and achieved inhibition growth up to 85 and 90%, respectively, after 24 h depending on the amount of Ag-SiO2 core-shell. It was found that SiO2 acted as crosslinking agent and controlling the amount of silver release. UV-vis spectra and TEM, XRD showed Ag-SiO2 core-shell particles formation. SEM, FTIR, XRD and mechanical analysis showed uniform distribution of Ag-SiO2 core-shell into rubber matrix with enhanced tensile strength.
Asunto(s)
Antibacterianos/farmacología , Dióxido de Silicio/farmacología , Plata/farmacología , Pruebas de Sensibilidad Microbiana/métodos , Nanopartículas/química , Pseudomonas aeruginosa/efectos de los fármacos , Goma/síntesis química , Goma/farmacología , Staphylococcus aureus/efectos de los fármacosRESUMEN
Isoprene is an important bulk chemical which is mostly derived from fossil fuels. It is used primarily for the production of synthetic rubber. Sustainable, biotechnology-based alternatives for the production of isoprene rely on the fermentation of sugars from food and feed crops, creating an ethical dilemma due to the competition for agricultural land. This issue could be addressed by developing new approaches based on the production of isoprene from abundant renewable waste streams. Here, we describe a proof-of-principle approach for the production of isoprene from cellulosic biomass, the most abundant polymer on earth. We engineered the mesophilic prokaryote Clostridium cellulolyticum, which can degrade cellulosic biomass, to utilize the resulting glucose monomers as a feedstock for the production of isoprene. This was achieved by integrating the poplar gene encoding isoprene synthase. The presence of the enzyme was confirmed by targeted proteomics, and the accumulation of isoprene was confirmed by GC-MS/MS. We have shown for the first time that engineered C. cellulolyticum can be used as a metabolic chassis for the sustainable production of isoprene.
Asunto(s)
Transferasas Alquil y Aril/metabolismo , Celulosa/metabolismo , Clostridium cellulolyticum/enzimología , Clostridium cellulolyticum/metabolismo , Hemiterpenos/biosíntesis , Transferasas Alquil y Aril/genética , Reactores Biológicos/microbiología , Biotecnología/métodos , Butadienos , Clostridium cellulolyticum/genética , Ingeniería Metabólica/métodos , Proteómica/métodos , Goma/síntesis químicaRESUMEN
Integrating multifunctionality such as stretchability, adhesiveness, and electroconductivity on a single protein hydrogel is highly desirable for various applications, and remains a challenge. Here we present the development of such multifunctional hydrogels based on resilin, a natural rubber-like material with remarkable extensibility and resilience. First, genetically engineered reslin-like proteins (RLPs) with varying molecular weight were biosynthesized to tune mechanical strength and stiffness of the cross-linked RLP hydrogels. Second, glycerol was incorporated into the hydrogels to endow adhesive properties. Next, a graphene-RLP conjugate was synthesized for cross-linking with the unmodified, pristine RLP to form an integrated network. The obtained hybrid hydrogel could be stretched to over four times of its original length, and self-adhered to diverse substrate surfaces due to its high adhesion strength of â¼24 kPa. Furthermore, the hybrid hydrogel showed high sensitivity, with a gauge factor of 3.4 at 200% strain, and was capable of real-time monitoring human activities such as finger bending, swallowing, and phonating. Due to these favorable attributes, the graphene/resilin hybrid hydrogel was a promising material for use in wearable sensors. In addition, the above material design and functionalization strategy may provide intriguing opportunities to generate innovative materials for broad applications.
Asunto(s)
Técnicas Biosensibles , Hidrogeles/química , Proteínas de Insectos/biosíntesis , Goma/química , Adhesivos/síntesis química , Adhesivos/química , Conductividad Eléctrica , Humanos , Hidrogeles/síntesis química , Proteínas de Insectos/química , Peso Molecular , Goma/síntesis química , Dispositivos Electrónicos VestiblesAsunto(s)
Disuasivos de Alcohol/efectos adversos , Disulfiram/efectos adversos , Erupciones por Medicamentos/etiología , Alcoholismo/tratamiento farmacológico , Dermatitis Alérgica por Contacto/etiología , Humanos , Masculino , Persona de Mediana Edad , Goma/efectos adversos , Goma/síntesis química , Automedicación/efectos adversos , Tiram/efectos adversosRESUMEN
BACKGROUND: Accelerators in rubber gloves constitute an important group of contact allergens, particularly in healthcare workers. OBJECTIVES: To assess the efficacy of accelerator-free medical gloves in the secondary prevention of allergic contact dermatitis caused by rubber accelerators in healthcare workers. METHODS: Nine healthcare workers with hand eczema were advised to use accelerator-free rubber gloves after a diagnosis of allergic contact dermatitis caused by rubber accelerators. RESULTS: Switching from conventional medical single-use gloves containing accelerators to accelerator-free medical gloves led to improvement in all cases, and more than two-thirds of the patients were completely free of symptoms. CONCLUSION: The use of accelerator-free medical gloves can be an effective alternative in healthcare workers who are allergic to rubber accelerators.
Asunto(s)
Dermatitis Alérgica por Contacto/prevención & control , Dermatitis Profesional/prevención & control , Guantes Quirúrgicos/efectos adversos , Dermatosis de la Mano/prevención & control , Sector de Atención de Salud , Adulto , Alérgenos/efectos adversos , Dermatitis Alérgica por Contacto/etiología , Dermatitis Profesional/etiología , Femenino , Dermatosis de la Mano/inducido químicamente , Humanos , Hipersensibilidad al Látex/inducido químicamente , Masculino , Persona de Mediana Edad , Goma/síntesis química , Goma/química , Prevención Secundaria/métodos , Tiocarbamatos/efectos adversos , Tiram/efectos adversos , Tiram/análogos & derivadosRESUMEN
Natural rubber latex was initially deproteinised (DNRL) and then subjected to physicochemical modifications to make high functional membranes for drug delivery applications. Initially, DNRL was prepared by incubating with urea, sodiumdodecylsulphate and acetone followed by centrifugation. The deproteinisation was confirmed by CHN analysis. The DNRL was then chemically modified by grafting (dimethylaminoethyl methacrylate) onto NR particles by using a redox initiator system viz; cumene hydroperoxide/tetraethylenepentamine, followed by dialysis for purification. The grafting was confirmed by dynamic light scattering, Fourier transform infrared spectroscopy and nuclear magnetic resonance spectroscopy. The grafted system was blended with a hydrophilic adhesive polymer PVA and casted into membranes. The membranes after blending showed enhanced mechanical properties with a threshold concentration of PVA. The moisture uptake, swelling and water contact angle experiments indicated an increased hydrophilicity with an increased PVA content in the blend membranes. The grafted DNRL possessed significant antibacterial property which has been found to be retained in the blended form. A notable decrease in cytotoxicity was observed for the modified DNRL membranes than the bare DNRL membranes. The in-vitro drug release studies using rhodamine B as a model drug, confirmed the utility of the prepared membranes to function as a drug delivery matrix.
Asunto(s)
Látex/síntesis química , Membranas Artificiales , Metacrilatos/síntesis química , Nylons/síntesis química , Alcohol Polivinílico/síntesis química , Goma/síntesis química , Animales , Antibacterianos/farmacología , Muerte Celular/efectos de los fármacos , Supervivencia Celular/efectos de los fármacos , Liberación de Fármacos , Dispersión Dinámica de Luz , Humedad , Cinética , Látex/química , Metacrilatos/química , Ratones , Pruebas de Sensibilidad Microbiana , Nylons/química , Alcohol Polivinílico/química , Espectroscopía de Protones por Resonancia Magnética , Rodaminas/química , Goma/química , Espectroscopía Infrarroja por Transformada de Fourier , TermogravimetríaRESUMEN
The polymerization of a new polar diene-based monomer 2-(2-methylidenebut-3-enyl)furan (MBEF) without masking is achieved by using the bis(phosphino)carbazoleide-ligated yttrium (Y) alkyl complex upon the activation of [Ph3 C][B(C6 F5 )4 ]. Under mild conditions, the polymerizations under the monomer-to-Y ratios ranging from 100:1 to 500:1 perform fluently in high yields. The afforded polydienes bearing pendant terminal furan groups have high cis-1,4-regularity up to 98.6% and molecular weights close to the theoretic values and narrow polymer dispersity index(PDI) (1.13-1.17) suggesting a livingness polymerization mode. In addition, this novel polydiene is an excellent building block for preparing functional rubber materials. For example, via Diels-Alder addition of furan groups under mild conditions, hydroxyl groups are successfully introduced on the side chains efficiently in a 75% conversion. Furthermore, the copolymerization of polar MBEF and nonpolar isoprene is also successfully realized by the bis(phosphino) carbazoleide-ligated scandium analog to access furan-modified cis-1,4 (>97%) polyisoprene with different MBEF contents (5.3%, 8.7%).
Asunto(s)
Furanos/química , Polimerizacion , Polímeros/síntesis química , Peso Molecular , Polímeros/química , Goma/síntesis químicaRESUMEN
Natural rubber latex (NRL) and rubber accelerators are well-known causes of occupational skin diseases. The latest epidemiological data on rubber allergy show that rubber additives are still among the allergens most strongly associated with occupational contact dermatitis, however, a decrease in NRL allergy has been confirmed. A review of recent publications on rubber allergens based on the Pubmed database is presented. New glove manufacturing processes have been developed, such as low-protein natural rubber gloves, vulcanisation accelerator-free gloves, or specific-purpose gloves containing antimicrobial agents or moisturisers. Several websites provide information on allergens found in gloves and/or glove choice according to occupation.
Asunto(s)
Alérgenos/efectos adversos , Guantes Protectores , Hipersensibilidad al Látex/epidemiología , Hipersensibilidad al Látex/prevención & control , Goma/efectos adversos , Guanidinas/inmunología , Humanos , Goma/síntesis química , Tiourea/análogos & derivados , Tiourea/inmunología , Tiram/análogos & derivados , Tiram/inmunologíaRESUMEN
Filler is one of the major additives in rubber compounds to enhance the physical properties. Even though numerous benefits obtained from agricultural by products like coconut shell, rice husk etc., still they constitute a large source of environmental pollution. In this investigation, one of the agricultural bye product coconut shell powder (CSP) is used as filler in the compounding KNB rubber. It shows the positive and satisfied result was achieved only by the use of filler Fast Extrusion Furnace (FEF) and coconut shell powder (CSP) which was used 50% in each. The effect of these fillers on the mechanical properties of a rubber material at various loading raging from 0 to 60PHP was studied. Mercaptodibanzothiazole disulphide (MBTS) was used as an accelerator. The result shows that presence of 25% and 50% of the composites has better mechanical properties like Hardness, Tensile strength, Elongation at break and Specific gravity when compared with other two combinations. Even though both 25% and 50% of composites shows good mechanical properties, 50% of CSP have more efficient than 25% of CSP.
Asunto(s)
Acrilonitrilo/síntesis química , Cocos , Goma/síntesis química , Butadienos , Dureza , Polímeros/síntesis química , Polvos , Resistencia a la TracciónRESUMEN
Development of novel and versatile strategies to construct conductive polymer composites with low percolation thresholds and high mechanical properties is of great importance. In this work, we report a facile and effective strategy to prepare polyaniline@cellulose nanowhiskers (PANI@CNs)/natural rubber (NR) nanocomposites with 3D hierarchical multiscale structure. Specifically, PANI was synthesized in situ on the surface of CNs biotemplate to form PANI@CNs nanohybrids with high aspect ratio and good dispersity. Then NR latex was introduced into PANI@CNs nanohybrids suspension to enable the self-assembly of PANI@CNs nanohybrids onto NR latex microspheres. During cocoagulation process, PANI@CNs nanohybrids selectively located in the interstitial space between NR microspheres and organized into a 3D hierarchical multiscale conductive network structure in NR matrix. The combination of the biotemplate synthesis of PANI and latex cocoagulation method significantly enhanced the electrical conductivity and mechanical properties of the NR-based nanocomposites simultaneously. The electrical conductivity of PANI@CNs/NR nanocomposites containing 5 phr PANI showed 11 orders of magnitude higher than that of the PANI/NR composites at the same loading fraction,; meanwhile, the percolation threshold was drastically decreased from 8.0 to 3.6 vol %.
Asunto(s)
Compuestos de Anilina/química , Celulosa/química , Nanocompuestos/química , Goma/química , Compuestos de Anilina/síntesis química , Celulosa/síntesis química , Conductividad Eléctrica , Polímeros/síntesis química , Polímeros/química , Goma/síntesis química , Propiedades de SuperficieRESUMEN
The new method for producing the functionalized polymers and oligomers containing carbonyl C=O groups is developed. The method is based on the noncatalytic oxidation of unsaturated rubbers by nitrous oxide (N2O) at 180-230 °Ð¡. The proposed method allows obtaining the new type of functionalized rubbers-liquid unsaturated polyketones with regulated molecular weight and concentration of C=O groups. The influence of the liquid polyketone addition on properties of rubber-based composites is investigated. The study indicates good prospects of using the liquid polyketones for the improvement of properties and operating characteristics of the various types of rubbers and the rubber-cord systems.
Asunto(s)
Óxido Nitroso/química , Goma/síntesis química , Cetonas/química , Oxidación-Reducción , Polímeros , Goma/químicaRESUMEN
The epoxidized natural rubber (ENR) latex-g-chitosan (ENR-g-chitosan) was prepared in latex form using potassium persulphate as an initiator. Firstly, the reduction in molecular weight of chitosan was subjected to the addition of K2S2O8 at 70 °C for 15 min. The structure of the modified chitosan was characterized by ATR-FTIR. Secondarily, the influence of chitosan contents, reaction time, and temperature and K2S2O8 concentrations on the gel content of the modified ENR was investigated. The chemical structure of the ENR-g-chitosan was confirmed by (1)H-NMR and ATR-FTIR. The ether linkage of the ENR-g-chitosan was conformed at 1154 an 1089 cm(-1) by ATR-FTIR and 3.60 ppm by (1)H-NMR. The gel content of ENR-g-chitosan at 5% chitosan showed the highest value compared with other samples. But when chitosan increased from 5% to 10% or 20%, the gel content of ENR-g-chitosan dramatically decreased. The ENR-g-chitosan showed good thermal resistance due to incorporation of chitosan. The morphology of ENR-g-chitosan particle showed the core-shell structure observed by TEM. The optimum condition of grafting ENR with chitosan was found at 65°C for 3h of reaction time, ratio of ENR/chitosan at 9:1.
Asunto(s)
Quitosano/química , Compuestos Epoxi/química , Geles/química , Látex/química , Goma/química , Quitosano/síntesis química , Compuestos Epoxi/síntesis química , Espectroscopía de Resonancia Magnética , Microscopía Electrónica de Transmisión , Compuestos de Potasio/química , Goma/síntesis química , Espectroscopía Infrarroja por Transformada de Fourier , Sulfatos/química , Temperatura , Termogravimetría , Factores de TiempoRESUMEN
An effective mercury removal method using polymer-coated activated carbon was studied for possible use in water treatment. In order to increase the affinity of activated carbon for mercury, a sulfur-rich compound, polysulfide-rubber (PSR) polymer, was effectively coated onto the activated carbon. The polymer was synthesized by condensation polymerization between sodium tetrasulfide and 1,2-dichloroethane in water. PSR-mercury interactions and Hg-S bonding were elucidated from x-ray photoelectron spectroscopy, and Fourier transform infra-red spectroscopy analyses. The sulfur loading levels were controlled by the polymer dose during the coating process and the total surface area of the activated carbon was maintained for the sulfur loading less than 2 wt%. Sorption kinetic studies showed that PSR-coated activated carbon facilitates fast reaction by providing a greater reactive surface area than PSR alone. High sulfur loading on activated carbon enhanced mercury adsorption contributing to a three orders of magnitude reduction in mercury concentration. µ-X-ray absorption near edge spectroscopic analyses of the mercury bound to activated carbon and to PSR on activated carbon suggests the chemical bond with mercury on the surface is a combination of Hg-Cl and Hg-S interaction. The pH effect on mercury removal and adsorption isotherm results indicate competition between protons and mercury for binding to sulfur at low pH.
Asunto(s)
Mercurio/aislamiento & purificación , Contaminantes Químicos del Agua/aislamiento & purificación , Purificación del Agua/métodos , Adsorción , Carbón Orgánico/química , Dicloruros de Etileno/química , Concentración de Iones de Hidrógeno , Mercurio/química , Goma/síntesis química , Compuestos de Sodio/química , Espectroscopía Infrarroja por Transformada de Fourier , Sulfuros/síntesis química , Sulfuros/química , Espectroscopía de Absorción de Rayos XRESUMEN
The biosynthetic origin of isopentenyl diphosphate in the polyisoprenoid biosynthesis of the rubber-producing plant Eucommia ulmoides Oliver was elucidated for the first time by feeding experiments using 13C-labeled isotopomers of (RS)-mevalonate, 1-deoxy-D-xylulose-3,4,5-triacetate, 2C-methyl-D-erythritol-1,2,3,4-tetraacetate, and pyruvate. After 13C-labeled isotopomers were fed to the young seedlings, the polyisoprenoid fractions were prepared and analyzed by 13C NMR. The NMR data showed that the isoprene units of polyisoprenoid derived from isopentenyl diphosphate, which was biosynthesized using both mevalonate and 1-deoxy-D-xylulose-5-phosphate in E. ulmoides. It is assumed that the cross-talk of isopentenyl diphosphate, derived from both pathways, occurs during the biosynthesis of polyisoprenoid; therefore, it was observed in the formation of low-molecular weight isoprenoids.
Asunto(s)
Eucommiaceae/metabolismo , Ácido Mevalónico/metabolismo , Fosfatos de Poliisoprenilo/metabolismo , Goma/síntesis química , Isótopos de Carbono , Espectroscopía de Resonancia Magnética , Fosfatos de Poliisoprenilo/biosíntesis , Fosfatos de Poliisoprenilo/aislamiento & purificación , Plantones/metabolismo , SolventesRESUMEN
The ingredients previously reported to cause protective glove allergy are presented and evaluated for strength of evidence. Allergens that have caused both delayed hypersensitivity and contact urticaria are considered for rubber, plastic, leather, and textile gloves. The current guidelines regarding glove manufacture are described. A list of materials confirmed by the industry to be used in glove production is presented together with a suggested series for investigating patients with delayed type hypersensitivity and contact urticaria secondary to glove use.
Asunto(s)
Guantes Protectores/efectos adversos , Hipersensibilidad/etiología , Antiinfecciosos/efectos adversos , Antioxidantes/efectos adversos , Caseínas/efectos adversos , Colorantes/efectos adversos , Humanos , Plastificantes/efectos adversos , Plásticos/síntesis química , Goma/síntesis química , TextilesRESUMEN
We examined the frequency of mutant lymphocytes (VFs) in workers (n = 30) occupationally exposed to the petrochemical, 1,3-butadiene (BD), using the autoradiographic HPRT mutant lymphocyte assay. Current exposures were determined with organic vapor monitors that had a 12-hr method detection limit (MDL) of 2.5 parts per billion (ppb). HPRT VFs were analyzed with respect to current exposure estimates, age in years, and occupational longevity (OL; defined as years working in the BD industry at this facility). Current exposures were low (mean 93.5 ppb, median 2.5 ppb) with only one individual's estimate (1683.5 ppb) exceeding the Occupational Safety and Health Administration's permissible exposure limit of 1,000 ppb. The majority (>50%) of current exposures were below the MDL. HPRT VFs were not significantly associated with current exposures (n = 29), and they were not significantly associated with age (n = 29). HPRT VFs were, however, significantly associated with OL (n = 29, R(2) = 0.107, P < 0.046). This result suggests that chronic and/or past, high-level exposures might leave a mutagenic signature that is revealed by the HPRT assay, possibly through the retention of mutant, long-term memory T-cells. While it is encouraging that current occupational exposures to BD in this facility do not appear to be increasing the frequency of mutant T-lymphocytes, evidence from workers with a lengthy history in the industry (>or=30 years in this case) indicates that these individuals likely require additional biomonitoring for possible mutagenic effects resulting from chronic, past exposures.
Asunto(s)
Contaminantes Ocupacionales del Aire/toxicidad , Butadienos/toxicidad , Industria Química , Hipoxantina Fosforribosiltransferasa/genética , Mutágenos/toxicidad , Mutación , Adulto , Anciano , Humanos , Linfocitos/efectos de los fármacos , Linfocitos/enzimología , Persona de Mediana Edad , Pruebas de Mutagenicidad , Exposición Profesional/efectos adversos , Exposición Profesional/análisis , Goma/síntesis química , Texas , Adulto JovenRESUMEN
Medium chain length polyhydroxyalkanoates (mcl-PHA) and different rubbers; namely natural rubber, nitrile rubber and butadiene rubber were blended at room temperature using solution blending technique. Blends constituted 5%, 10% and 15% of mcl-PHA in different rubbers. Thermogravimetric analysis of mcl-PHA showed the melting temperature of the polymer around 50 degrees C. Thermal properties of the synthesized blend were studied by Differential Scanning Calorimetry which confirmed effective blending between the polymers. Blending of mcl-PHA with natural rubber led to the synthesis of a different polymer having the melting point of 90 degrees C. Degradation studies of the blends were carried out using a soil isolate, Pseudomonas sp. 202 for 30 days. Extracellular protein concentration as well as OD660 due to the growth of Pseudomonas sp. 202 was studied. The degradation of blended plastic material, as evidenced by % weight loss after degradation and increase in the growth of organism correlated with the amount of mcl-PHA present in the sample. Growth of Pseudomonas sp. 202 resulted in 14.63%, 16.12% and 3.84% weight loss of PHA:rubber blends (natural, nitrile and butadiene rubber). Scanning electron microscopic studies after 30 days of incubation further confirmed biodegradation of the films.
Asunto(s)
Polihidroxialcanoatos/biosíntesis , Goma/síntesis química , Proteínas Bacterianas/metabolismo , Biodegradación Ambiental , Calorimetría , Aceite de Coco , Comamonas testosteroni/metabolismo , Aceites de Plantas/metabolismo , Polihidroxialcanoatos/aislamiento & purificación , Pseudomonas/crecimiento & desarrollo , TermogravimetríaRESUMEN
Natural rubber, obtained almost exclusively from the Para rubber tree (Hevea brasiliensis), is a unique biopolymer of strategic importance that, in many of its most significant applications, cannot be replaced by synthetic rubber alternatives. Several pressing motives lead to the search for alternative sources of natural rubber. These include increased evidence of allergenic reactions to Hevea rubber, the danger that the fungal pathogen Microcyclus ulei, causative agent of South American Leaf Blight (SALB), might spread to Southeast Asia, which would severely disrupt rubber production, potential shortages of supply due to increasing demand and changes in land use, and a general trend towards the replacement of petroleum-derived chemicals with renewables. Two plant species have received considerable attention as potential alternative sources of natural rubber: the Mexican shrub Guayule (Parthenium argentatum Gray) and the Russian dandelion (Taraxacum koksaghyz). This review will summarize the current production methods and applications of natural rubber (dry rubber and latex), the threats to the production of natural rubber from the rubber tree, and describe the current knowledge of the production of natural rubber from guayule and Russian dandelion.
Asunto(s)
Asteraceae/genética , Asteraceae/metabolismo , Genes de Plantas , Goma/síntesis química , Goma/metabolismo , Asteraceae/química , Ingeniería Genética , Extractos Vegetales/química , Especificidad de la EspecieRESUMEN
Allergic contact dermatitis to rubber is caused by residues of chemicals used in manufacturing a rubber product. Several different additives are used to achieve a final product of the desired characteristics. Accelerators such as thiurams, dithiocarbamates, and mercaptobenzothiazoles are often among the additives responsible for allergic reactions recognized by dermatologists. The chemistry of the vulcanization process is complicated; as it occurs at an elevated temperature with a mixture of reactive chemicals, the compositions of the initial and final products differ. This paper investigates the changes in composition of common allergens during vulcanization, doing so by chemically analysing various rubber formulations at different stages of the process. Major changes were found in which added chemicals were consumed and new ones produced. An important observation is that thiuram disulfides rarely appear in the final rubber although they may have been used as additives. Instead, thiurams are often converted to dithiocarbamates or to products formed by addition to mercaptobenzothiazole structures, if these have been used together with thiurams as accelerators.