Morpho-anatomical, physiological and biochemical changes in rubber tree seeds.

The physical, physiological and biochemical changes during the development until the dispersal of rubber tree seeds were evaluated with the purpose of estimating the point at physiological maturity. A total of 30 plants were selected at different points in a commercial planting area and had their flowers marked during the anthesis and every 15 days after marking. Fruits and seeds were collected for analysis of moisture content, dry matter, diameter and length. Details of the anatomy ultra-structure of the seeds were evaluated. The seed emergence, emergency speed index, heat resistant proteins and oxidative stress enzymes were examined. It was observed that fruits reached maximum size at 120 days after anthesis and seeds at 150 days. The seeds acquired germination capacity after 150 days. At 175 days, they presented the highest percentage of dry matter and lowest moisture, in addition to a higher percentage of germination and vigor. Therefore, it was possible to conclude that the physiological maturity of the rubber tree seeds occurs at 175 days after anthesis, and coincides with its maximum physiological quality. At 175 and 180 days post-anthesis, there is a greater expression of heat resistant proteins as well as low molecular weight and greater oxidative stress enzyme activity.

Comparative morphology and transcriptome analysis reveals distinct functions of the primary and secondary laticifer cells in the rubber tree.

Laticifers are highly specialized cells that synthesize and store natural rubber. Rubber trees (Hevea brasiliensis Muell. Arg.) contain both primary and secondary laticifers. Morphological and functional differences between the two types of laticifers are largely unknown, but such information is important for breeding and cultivation practices. Morphological comparison using paraffin sections revealed only distribution differences: the primary laticifers were distributed randomly, while the secondary laticifers were distributed in concentric rings. Using isolated laticifer networks, the primary laticifers were shown to develop via intrusive "budding" and formed necklace-like morphology, while the secondary laticifers developed straight and smooth cell walls. Comparative transcriptome analysis indicated that genes involved in cell wall modification, such as pectin esterase, lignin metabolic enzymes, and expansins, were highly up-regulated in the primary laticifers and correspond to its necklace-like morphology. Genes involved in defense against biotic stresses and rubber biosynthesis were highly up-regulated in the primary laticifers, whereas genes involved in abiotic stresses and dormancy were up-regulated in the secondary laticifers, suggesting that the primary laticifers are more adequately prepared to defend against biotic stresses, while the secondary laticifers are more adequately prepared to defend against abiotic stresses. Therefore, the two types of laticifers are morphologically and functionally distinct.

Mechanical wounding-induced laticifer differentiation in rubber tree: An indicative role of dehydration, hydrogen peroxide, and jasmonates.

The secondary laticifer in the secondary phloem of rubber tree are a specific tissue differentiating from vascular cambia. The number of the secondary laticifers is closely related to the rubber productivity of Hevea. Factors involved in the mechanical wounding-induced laticifer differentiation were analyzed by using paraffin section, gas chromatography-mass spectrometry (GC-MS), and Northern-blot techniques. Dehydration of the wounded bark tissues triggered a burst of hydrogen peroxide, abscisic acid, and jasmonates and up-regulated the expression of HbAOSa, which was associated with the secondary laticifer differentiation strictly limited to the wounded area. Application of exogenous hydrogen peroxide, methyl jasmonate, and polyethylene glycol 6000 (PEG6000) could induce the secondary laticifer differentiation, respectively. Moreover, 6-Benzylaminopurine, a synthetic cytokinin, enhanced the methyl jasmonate-induced secondary laticifer differentiation. However, the dehydration-induced secondary laticifer differentiation was inhibited by exogenous abscisic acid. Diphenyleneiodonium chloride (DPI), a specific inhibitor of NADPH oxidase, was effective in inhibiting the accumulation of hydrogen peroxide as well as of jasmonates upon dehydration. It blocked the dehydration-induced but not the methyl jasmonate-induced secondary laticifer differentiation. The results suggested a stress signal pathway mediating the wound-induced secondary laticifer differentiation in rubber tree.

Natural forest biomass estimation based on plantation information using PALSAR data.

Forests play a vital role in terrestrial carbon cycling; therefore, monitoring forest biomass at local to global scales has become a challenging issue in the context of climate change. In this study, we investigated the backscattering properties of Advanced Land Observing Satellite (ALOS) Phased Array L-band Synthetic Aperture Radar (PALSAR) data in cashew and rubber plantation areas of Cambodia. The PALSAR backscattering coefficient (σ0) had different responses in the two plantation types because of differences in biophysical parameters. The PALSAR σ0 showed a higher correlation with field-based measurements and lower saturation in cashew plants compared with rubber plants. Multiple linear regression (MLR) models based on field-based biomass of cashew (C-MLR) and rubber (R-MLR) plants with PALSAR σ0 were created. These MLR models were used to estimate natural forest biomass in Cambodia. The cashew plant-based MLR model (C-MLR) produced better results than the rubber plant-based MLR model (R-MLR). The C-MLR-estimated natural forest biomass was validated using forest inventory data for natural forests in Cambodia. The validation results showed a strong correlation (R2 = 0.64) between C-MLR-estimated natural forest biomass and field-based biomass, with RMSE  = 23.2 Mg/ha in deciduous forests. In high-biomass regions, such as dense evergreen forests, this model had a weaker correlation because of the high biomass and the multiple-story tree structure of evergreen forests, which caused saturation of the PALSAR signal.

QTL mapping of growth-related traits in a full-sib family of rubber tree (Hevea brasiliensis) evaluated in a sub-tropical climate.

The rubber tree (Hevea spp.), cultivated in equatorial and tropical countries, is the primary plant used in natural rubber production. Due to genetic and physiological constraints, inbred lines of this species are not available. Therefore, alternative approaches are required for the characterization of this species, such as the genetic mapping of full-sib crosses derived from outbred parents. In the present study, an integrated genetic map was obtained for a full-sib cross family with simple sequence repeats (SSRs) and expressed sequence tag (EST-SSR) markers, which can display different segregation patterns. To study the genetic architecture of the traits related to growth in two different conditions (winter and summer), quantitative trait loci (QTL) mapping was also performed using the integrated map. Traits evaluated were height and girth growth, and the statistical model was based in an extension of composite interval mapping. The obtained molecular genetic map has 284 markers distributed among 23 linkage groups with a total length of 2688.8 cM. A total of 18 QTLs for growth traits during the summer and winter seasons were detected. A comparison between the different seasons was also conducted. For height, QTLs detected during the summer season were different from the ones detected during winter season. This type of difference was also observed for girth. Integrated maps are important for genetics studies in outbred species because they represent more accurately the polymorphisms observed in the genitors. QTL mapping revealed several interesting findings, such as a dominance effect and unique segregation patterns that each QTL could exhibit, which were independent of the flanking markers. The QTLs identified in this study, especially those related to phenotypic variation associated with winter could help studies of marker-assisted selection that are particularly important when the objective of a breeding program is to obtain phenotypes that are adapted to sub-optimal regions.

Differential gene expression in different types of Hevea brasiliensis roots.

Three types of roots (taproots, first order laterals and second order laterals) were functionally characterized on 7-month-old in vitro plantlets regenerated by somatic embryogenesis in Hevea brasiliensis. A histological analysis revealed different levels of differentiation depending on root diameter. A primary structure was found in first and second order lateral roots, while taproots displayed a secondary structure. The expression of 48 genes linked to some of the regulatory pathways acting in roots was compared in leaves, stems and the different types of roots by real-time RT-PCR. Thirteen genes were differentially expressed in the different organs studied in plants grown under control conditions. Nine additional other genes were differentially regulated between organs under water deficit conditions. In addition, 10 genes were significantly regulated in response to water deficit, including 8 regulated mainly in lateral roots types. Our results suggest that the regulation of gene expression in lateral roots is different than that in taproots, which have a main role in nutrient uptake and transport, respectively.

[Soil moisture content and fine root biomass of rubber tree (Hevea brasiliensis) plantations at different ages].

By using soil core sampling method, this paper studied the soil moisture regime of rubber plantations and the fine root biomass of Hevea brasiliensis in immature period (5 a), early yielding period (9 a), and peak yielding period (16 a). With the increasing age of rubber trees, the soil moisture content of rubber plantations increased but the fine root biomass decreased. The soil moisture content at the depth of 0-60 cm in test rubber plantations increased with soil depth, and presented a double-peak pattern over the period of one year. The fine root biomass of rubber trees at different ages had the maximum value in the top 10 cm soil layers and decreased with soil depth, its seasonal variation also showed a double-peak pattern, but the peak values appeared at different time. Soil moisture content and soil depth were the main factors affecting the fine root biomass of H. brasiliensis.

Caracteristicas anatômicas da casca e produção de látex em plantas de seringueira não enxertadas / Anatomic bark characteristics and latex production in non-grafted rubber trees

As estruturas envolvidas na produção de látex na seringueira são os laticíferos articulados. O objetivo deste estudo foi descrever aspectos anatômicos da casca em seringueiras não enxertadas com quatro, seis e oito anos, visando à seleção de materiais promissores. O material analisado foi obtido através do corte da casca à altura aproximada de 1,50 m do solo, chegando até o xilema da planta. Os cortes transversais foram preparados de acordo com as técnicas usuais de microtécnica vegetal. Os resultados permitem concluir, que a utilização de caracteres anatômicos (diâmetro das células), da espessura da casca e do diâmetro do caule, visando à seleção dos materiais de pés-francos com idades diferentes, apresentaram uma correlação significativa com a produção de látex.

The structures involved in latex production in rubber trees are articulated laticifers. The objective of this study was to describe anatomical aspects of the bark in four, six and eight year old non-grafted rubber plants, with the view of selecting materials of high yield potential. The analyzed material was obtained from bark cut around 1.50 m from the soil up to the xylem of the plant. The transversal cuts were prepared according to standard plant microtechniques. Based on the results, we can conclude that the use of anatomical characteristics (cell diameter), bark thickness and shoot diameter for selecting material from rootstocks plus non-grafted plants of different ages, showed a significant correlation with latex production.

Histochemical study of detailed laticifer structure and rubber biosynthesis-related protein localization in Hevea brasiliensis using spectral confocal laser scanning microscopy.

In Hevea brasiliensis, laticifers produce and accumulate rubber particles. Despite observation using histochemical methods, development stage structure and structures with ceasing functions have rarely been described. Spectral confocal laser scanning microscopy with Nile red staining simplifies laticifer structure observation in tangential sections while enhancing the resolution. Laticifer and ray images were extracted from unmixed images and used to monitor changes during growth. A laticifer network structure developed from increased anastomoses between adjoining laticifers outside of the conducting phloem, but because of increased radial division and growth of rays, the network structure ruptured and disintegrated. We also investigated immunohistochemical localization of two rubber particle-associated proteins in the laticifers: small rubber particle protein (SRPP) and rubber elongation factor (REF). Mature bark test results show that SRPP is localized only in the laticifer layers in the conducting phloem; REF is localized in all laticifer layers. Because SRPP plays a positive role in rubber biosynthesis, results show that the rubber biosynthesis capability of laticifers is concentrated where rays and the sieve tube actively transport metabolites.

Cloning and molecular characterization of HbCOI1 from Hevea brasiliensis.

The full-length cDNA encoding a coronatine insensitive-1 (COI1) protein, designated HbCOI1, was isolated for the first time from Hevea brasiliensis by the rapid amplification of cDNA ends (RACE) method. HbCOI1 contained a 2,187 bp open reading frame encoding 597 amino acids. The deduced HbCOI1 protein, which showed high identity to COI1 protein of other plant species, was predicted to possess F-box and LRRs domains. The promoter region of HbCOI1 was isolated by the PCR-based DNA walking method. TATA box and other core configurations were found in the promoter. Several sequences similar to the eukaryotic cis regulatory element were found in the 5'-untranslated region (UTR) proximal 5' flanking sequence of HbCOI1. Southern blot analysis indicated that the HbCOI1 is present as a single copy in Hevea brasiliensis. Transcription pattern analysis revealed that HbCOI1 had high transcription in laticifer, low in barks and leaf. Transcription of HbCOI1 in latex was induced by jasmonate and tapping.

Rubber Tree (Hevea brasiliensis Muell. Arg).

Rubber tree (Hevea brasiliensis Muell. Arg.) is an important industrial crop for natural rubber production. At present, more than 9.5 million hectares in about 40 countries are devoted to rubber tree cultivation with a production about 6.5 million tons of dry rubber each year. The world supply of natural rubber is barely keeping up with a global demand for 12 million tons of natural rubber in 2020. Tapping panel dryness (TPD) is a complex physiological syndrome widely found in rubber tree plantations, which causes severe yield and crop losses in natural rubber producing countries. Currently, there is no effective prevention or treatment for this serious malady. As it is a perennial tree crop, the integration of specific desired traits through conventional breeding is both time-consuming and labour-intensive. Genetic transformation with conventional breeding is certainly a more promising tool for incorporation of agronomically important genes that could improve existing Hevea genotype. This chapter provides an Agrobacterium-mediated transformation protocol for rubber tree using immature anther-derived calli as initial explants. We have applied this protocol to generate genetically engineered plants from a high yielding Indian clone RRII 105 of Hevea brasiliensis (Hb). Calli were co-cultured with Agrobacterium tumefaciens harboring a plasmid vector containing the Hb superoxide dismutase (SOD) gene and the reporter gene used was beta-glucuronidase (GUS) gene (uidA). The selectable marker gene used was neomycin phosphotransferase (nptII) and kanamycin was used as selection agent. We found that a suitable transformation protocol for Hevea consists of a 3-d co-cultivation with Agrobacterium in the presence of 20 mM acetosyringone, 15 mM betaine HCl, and 11.55 mM proline followed by selection on medium containing 300 mg/L kanamycin. Transformed calli surviving on medium containing 300 mg/L kanamycin showed a strong GUS-positive reaction. Upon subsequent subculture into fresh media, we obtained somatic embryogenesis and germinated plantlets, which were found to be GUS positive. The integration of uidA, nptII, and HbSOD transgenes into Hevea genome was confirmed by polymerase chain reaction (PCR) as well as Southern blot analysis.

[Is there any point to eradicate Phragmanthera capitata parasitizing African rubber trees?]. / Faut-il éradiquer Phragmanthera capitata, parasite des hévéas en Afrique?

The effect of Phragmanthera capitata (Sprengel) Balle, an epiphytic Loranthaceae, on latex production of three clones of rubber tree, Hevea brasiliensis (Müll. Arg.), was studied in the industrial plantation of Mitzic, in Gabon. The 22-year-old trees, presenting the largest trunk circumference, were the most parasitized and at the same time the best producers of latex. At first, this would suggest that mistletoe parasitism could have a favourable effect on latex yield. However, an accurate statistical analysis showed that, in fact, parasitism had no significant effect on latex yield. These data, discussed in relation to the biology of flowering parasitic plants, suggest that there is no urgency to eradicate Phragmanthera capitata for the moment.