Quantitative analysis of hemodynamic changes induced by the discrepancy between the sizes of the flow diverter and parent artery.

The efficacy of flow diverters is influenced by the strut configuration changes resulting from size discrepancies between the stent and the parent artery. This study aimed to quantitatively analyze the impact of size discrepancies between flow diverters and parent arteries on the flow diversion effects, using computational fluid dynamics. Four silicone models with varying parent artery sizes were developed. Real flow diverters were deployed in these models to assess stent configurations at the aneurysm neck. Virtual stents were generated based on these configurations for computational fluid dynamics analysis. The changes in the reduction rate of the hemodynamic parameters were quantified to evaluate the flow diversion effect. Implanting 4.0 mm flow diverters in aneurysm models with parent artery diameters of 3.0-4.5 mm, in 0.5 mm increments, revealed that a shift from oversized to undersized flow diverters led to an increase in the reduction rates of hemodynamic parameter, accompanied by enhanced metal coverage rate and pore density. However, the flow diversion effect observed transitioning from oversizing to matching was less pronounced when moving from matching to undersizing. This emphasizes the importance of proper sizing of flow diverters, considering the benefits of undersizing and not to exceed the threshold of advantages.

Numerical investigation of fluid flow behavior in steel cord with lattice Boltzmann methodology: The impacts of microstructure and loading force.

Steel cord materials were found to have internal porous microstructures and complex fluid flow properties. However, current studies have rarely reported the transport behavior of steel cord materials from a microscopic viewpoint. The computed tomography (CT) scanning technology and lattice Boltzmann method (LBM) were used in this study to reconstruct and compare the real three-dimensional (3D) pore structures and fluid flow in the original and tensile (by loading 800 N force) steel cord samples. The pore-scale LBM results showed that fluid velocities increased as displacement differential pressure increased in both the original and tensile steel cord samples, but with two different critical values of 3.3273 Pa and 2.6122 Pa, respectively. The original steel cord sample had higher maximal and average seepage velocities at the 1/2 sections of 3D construction images than the tensile steel cord sample. These phenomena should be attributed to the fact that when the original steel cord sample was stretched, its porosity decreased, pore radius increased, flow channel connectivity improved, and thus flow velocity increased. Moreover, when the internal porosity of tensile steel cord sample was increased by 1 time, lead the maximum velocity to increase by 1.52 times, and the average velocity was increased by 1.66 times. Furthermore, when the density range was determined to be 0-38, the pore phase showed the best consistency with the segmentation area. Depending on the Zou-He Boundary and Regularized Boundary, the relative error of simulated average velocities was only 0.2602 percent.

Numerical Simulation on Radon Retardation Behavior of Covering Floats in Radon-Containing Water.

Objective: This study aimed to efficiently reduce the release of radon from water bodies to protect the environment. Methods: Based on the sizes of the experimental setup and modular float, computational fluid dynamics (CFD) was used to assess the impact of the area coverage rate, immersion depth, diffusion coefficient, and radon transfer velocity at the gas-liquid interface on radon migration and exhalation of radon-containing water. Based on the numerical simulation results, an estimation model for the radon retardation rate was constructed. The effectiveness of the CFD simulation was evaluated by comparing the experimental and simulated variation values of the radon retardation rate with the coverage area rates. Results: The effect of radon transfer velocity on radon retardation in water bodies was minor and insignificant according to the appropriate value; therefore, an estimation model of the radon retardation rate of the coverage of a radon-containing water body was constructed using the synergistic impacts of three factors: area coverage rate, immersion depth, and diffusion coefficient. The deviation between the experimental and simulated results was < 4.3%. Conclusion: Based on the numerical simulation conditions, an estimation model of the radon retardation rate of covering floats in water bodies under the synergistic effect of multiple factors was obtained, which provides a reference for designing covering floats for radon retardation in radon-containing water.

Intraoperative Performance and Early Postoperative Outcomes Following Phacoemulsification With Three Fluidic Systems: A Randomized Trial.

PURPOSE: To compare intraoperative performance and early postoperative outcomes following phacoemulsification with two systems using active fluidics and one using gravity-based fluidics. METHODS: In this prospective randomized trial, 200 eyes were randomized to the traditional and Active Sentry groups (n = 80 eyes each) where the Centurion Vision System was used with traditional or Active Sentry (Alcon Laboratories, Inc) hand-pieces, respectively, or the Infinit group (n = 40 eyes) where the Infiniti Vision System (Alcon Laboratories, Inc) was used. Within the traditional and Active Sentry groups, there were two subgroups with low (30 mm Hg) or high (55 mm Hg) intraocular pressure (IOP) used. Outcome measures compared were: cumulative dissipated energy (CDE), percentage change in central corneal thickness (CCT) at 1 day, 1 week, and 1 month, anterior chamber cells at 1 day and 1 week, rate of rise and fall of IOP following occlusion break, corneal endothelial cell density (ECD), and macular thickness 6 months postoperatively. RESULTS: CDE was significantly lower in group II compared to the traditional group (2.96 ± 1.4 vs 4.14 ± 2.2, P = .001). With 30 mm Hg IOP, the Active Sentry group had significantly less percentage change in CCT at 1 week postoperatively compared to the traditional handpiece group (0.01% vs 0.02%, P = .008). Incidence of anterior chamber cells less than grade 2 on day 1 was significantly higher in the Active Sentry group (82.9% vs 52%, P = .03). Percentage change in ECD was significantly lower in the Active Sentry group (-0.957 vs -0.98%, P = .005). Significantly faster rise of IOP to baseline following occlusion break was seen in the Active Sentry group. CONCLUSIONS: The use of Active Sentry handpiece was associated with lower CDE, less postoperative increase in CCT, fewer anterior chamber cells, and faster rise of IOP following occlusion break. [J Refract Surg. 2024;40(5):e304-e312.].

Engineered shapes using electrohydrodynamic atomization for an improved drug delivery.

The shapes of micro- and nano-products have profound influences on their functional performances, which has not received sufficient attention during the past several decades. Electrohydrodynamic atomization (EHDA) techniques, mainly include electrospinning and electrospraying, are facile in manipulate their products' shapes. In this review, the shapes generated using EHDA for modifying drug release profiles are reviewed. These shapes include linear nanofibers, round micro-/nano-particles, and beads-on-a-string hybrids. They can be further divided into different kinds of sub-shapes, and can be explored for providing the desired pulsatile release, sustained release, biphasic release, delayed release, and pH-sensitive release. Additionally, the shapes resulted from the organizations of electrospun nanofibers are discussed for drug delivery, and the shapes and inner structures can be considered together for developing novel drug delivery systems. In future, the shapes and the related shape-performance relationships at nanoscale, besides the size, inner structure and the related structure-performance relationships, would further play their important roles in promoting the further developments of drug delivery field. This article is categorized under: Therapeutic Approaches and Drug Discovery > Emerging Technologies.

Modeling and experimental study of the intervention forces between the guidewire and blood vessels.

A profound investigation of the interaction mechanics between blood vessels and guidewires is necessary to achieve safe intervention. An interactive force model between guidewires and blood vessels is established based on cardiovascular fluid dynamics theory and contact mechanics, considering two intervention phases (straight intervention and contact intervention at a corner named "J-vessel"). The contributing factors of the force model, including intervention conditions, guidewire characteristics, and intravascular environment, are analyzed. A series of experiments were performed to validate the availability of the interactive force model and explore the effects of influential factors on intervention force. The intervention force data were collected using a 2-DOF mechanical testing system instrumented with a force sensor. The guidewire diameter and material were found to significantly impact the intervention force. Additionally, the intervention force was influenced by factors such as blood viscosity, blood vessel wall thickness, blood flow velocity, as well as the interventional velocity and interventional mode. The experiment of the intervention in a coronary artery physical vascular model confirms the practicality validation of the predicted force model and can provide an optimized interventional strategy for vascular interventional surgery. The enhanced intervention strategy has resulted in a considerable reduction of approximately 21.97 % in the force exerted on blood vessels, effectively minimizing the potential for complications associated with the interventional surgery.

Dynamic Monitoring of Biomolecular Hydrodynamic Dimensions by Magnetization Motion on Quartz Crystal Microbalance.

Hydrodynamic dimension (HD) is the primary indicator of the size of bioconjugated particles and biomolecules. It is an important parameter in the study of solid-liquid two-phase dynamics. HD dynamic monitoring is crucial for precise and customized medical research as it enables the investigation of the continuous changes in the physicochemical characteristics of biomolecules in response to external stimuli. However, current HD measurements based on Brownian motion, such as dynamic light scattering (DLS), are inadequate for meeting the polydisperse sample demands of dynamic monitoring. In this paper, we propose MMQCM method samples of various types and HD dynamic monitoring. An alternating magnetic field of frequency ωm excites biomolecule-magnetic bead particles (bioMBs) to generate magnetization motion, and the quartz crystal microbalance (QCM) senses this motion to provide HD dynamic monitoring. Specifically, the magnetization motion is modulated onto the thickness-shear oscillation of the QCM at the frequency ωq. By analysis of the frequency spectrum of the QCM output signal, the ratio of the magnitudes of the real and imaginary parts of the components at frequency ωq ± 2ωm is extracted to characterize the particle size. Using the MMQCM approach, we successfully evaluated the size of bioMBs with different biomolecule concentrations. The 30 min HD dynamic monitoring was implemented. An increase of ∼10 nm in size was observed upon biomolecular structural stretching. Subsequently, the size of bioMBs gradually reduced due to the continuous dissociation of biomolecules, with a total reduction of 20∼40 nm. This HD dynamic monitoring demonstrates that the release of biomolecules can be regulated by controlling the duration of magnetic stimulation, providing valuable insights and guidance for controlled drug release in personalized precision medicine.

The impact of small movements with dual lumen cannulae during venovenous extracorporeal membrane oxygenation: A computational fluid dynamics analysis.

BACKGROUND AND OBJECTIVES: Venovenous Extracorporeal Membrane Oxygenation (VV ECMO) provides respiratory support to patients with severe lung disease failing conventional medical therapy. An essential component of the ECMO circuit are the cannulas, which drain and return blood into the body. Despite being anchored to the patient to prevent accidental removal, minor cannula movements are common during ECMO. The clinical and haemodynamic consequences of these small movements are currently unclear. This study investigated the risk of thrombosis and recirculation caused by small movements of a dual lumen cannula (DLC) in an adult using computational fluid dynamics. METHODS: The 3D model of an AVALON Elite DLC (27 Fr) and a patient-specific vena cava and right atrium were generated for an adult patient on ECMO. The baseline cannula position was generated where the return jet enters the tricuspid valve. Alternative cannula positions were obtained by shifting the cannula 5 and 15 mm towards inferior (IVC) and superior (SVC) vena cava, respectively. ECMO settings of 4 L/min blood flow and pulsatile flow at SVC and IVC were applied. Recirculation was defined as a scalar value indicating the infused oxygenated blood inside the drainage lumen, while thrombosis risk was evaluated by shear stress, stagnation volume, washout, and turbulent kinetic energy. RESULTS: Recirculation for all models was less than 3.1 %. DLC movements between -5 to 15 mm increased shear stress and turbulence kinetic energy up to 24.7 % and 11.8 %, respectively, compared to the baseline cannula position leading to a higher predicted thrombosis risk. All models obtained a complete washout after nine seconds except for when the cannula migrated 15 mm into the SVC, indicating persisting stasis and circulating zones. CONCLUSION: In conclusion, small DLC movements were not associated with an increased risk of recirculation. However, they may increase the risk of thrombosis due to increased shear rate, turbulence, and slower washout of blood. Developing effective cannula securement devices may reduce this risk.

Effects of adenoid hypertrophy on nasopharyngeal airway ventilation: A computational fluid dynamics study.

OBJECTIVES: Adenoid hypertrophy causes impaired nasopharyngeal airways (NA) ventilation. However, it is difficult to evaluate the ventilatory conditions of NA. Therefore, this study aimed to analyze the nasopharyngeal airway resistance (NARES) based on computational fluid dynamics simulations and the nasopharyngeal airway depth (NAD) and adenoid hypertrophy grade measured on cephalometric cone-beam computed tomography images and determine the relationship between NAD and grade and NARES to ultimately assess using cephalometric measurements whether NA has airway obstruction defects. METHODS: Cephalogram images were generated from cone-beam computed tomography data of 102 children (41 boys; mean age: 9.14 ± 1.43 years) who received orthodontic examinations at an orthodontic clinic from September 2012 to March 2023, and NAD and adenoid grade and NARES values were measured based on computational fluid dynamics analyses using a 3D NA model. Nonlinear regression analyses were used to evaluate the relationship between NARES and NAD and correlation coefficients to evaluate the relationship between grade and NARES. RESULTS: NARES was inversely proportional to the cube of NAD (R2 = 0.786, P < 0.001), indicating a significant relationship between these variables. The resistance NARES increased substantially when the distance NAD was less than 5 mm. However, adenoid Grade 4 (75 % hypertrophy) was widely distributed. CONCLUSIONS: These study findings demonstrate that the ventilatory conditions of NA can be determined based on a simple evaluation of cephalogram images. An NAD of less than 5 mm on cephalometric images results in NA obstruction with substantially increased airflow resistance.

[Influence of the pattern of femtosecond laser-assisted lens nucleus fragmentation on the energy and hydrodynamic parameters of phacoemulsification]. / Vliyanie patterna fragmentatsii yadra khrustalika femtosekundnym lazerom na energeticheskie i gidrodinamicheskie parametry fakoemul'sifikatsii.

The influence of various patterns of preliminary femtosecond laser-assisted fragmentation of the lens nucleus on the energy and hydrodynamic parameters of phacoemulsification remains insufficiently studied. PURPOSE: This study evaluates the influence of various patterns of preliminary femtosecond laser-assisted fragmentation of the lens nucleus on the energy, hydrodynamic parameters of phacoemulsification, and the degree of corneal endothelial cell loss. MATERIAL AND METHODS: Hybrid phacoemulsification was performed in 336 patients (336 eyes) with grade IV immature cataract according to the Buratto classification in three age-matched groups. Group 1 included 103 patients (103 eyes) who underwent hybrid phacoemulsification with preliminary femtosecond laser-assisted fragmentation of the nucleus with a «pizza¼ pattern (division of the nucleus with 10 radial cuts). Group 2 included 112 patients (112 eyes) who underwent femtosecond laser-assisted fragmentation of the nucleus with a «cylinders¼ pattern (division of the nucleus with 8 radial cuts in combination with 5 circular cuts). Group 3 included 121 patients (121 eyes) who underwent femtosecond laser-assisted fragmentation of the nucleus with a «grid¼ pattern (division of the nucleus with 8 radial cuts in combination with multiple mutually perpendicular cuts in the central zone in the form of a grid with a 0.5 mm cell). Effective ultrasound time and the volume of irrigation solution for emulsification of the lens nucleus fragments were determined during the operation. The loss of corneal endothelial cells was assessed 3 months after surgery. RESULTS: The minimum effective ultrasound time was noted after using the "grid" pattern - 4.05 (2.88; 4.74) s, which was significantly less than with the "cylinders" pattern - 4.97 (3.78; 5.88) s and the "pizza" pattern - 6.15 (4.52; 7.75) s (p<0.05). The effective ultrasound time when using the "cylinders" pattern was significantly less than with the "pizza" pattern (p<0.05). The volume of irrigation solution used for emulsification of the lens nucleus fragments was significantly less in the "grid" pattern - 41.5 (33.5; 49.5) ml compared to the "cylinders" patterns 58.5 (51.0; 66.0), p<0.05 and "pizza" pattern 75.0 (66.0; 83.5), p<0.01. The volume of irrigation solution when using the "cylinders" pattern was significantly less than when using the "pizza" pattern (p<0.05). The loss of corneal endothelial cells after using the "grid" pattern was 8.82 (7.59; 9.87)%, which was significantly less than after the "cylinders" patterns - 9.97 (8.81; 10.83)%, p<0.05 and "pizza" - 11.70 (10.62; 12.97)%, p<0.05. At the same time, the loss of endothelial cells after using the "cylinders" pattern was significantly less than after the "pizza" pattern (p<0.05). CONCLUSIONS: The choice of the optimal pattern of preliminary femtosecond laser-assisted fragmentation of the lens nucleus provides a significant decrease in the energy and hydrodynamic parameters of phacoemulsification and, accordingly, the loss of corneal endothelial cells.

A comprehensive stroke risk assessment by combining atrial computational fluid dynamics simulations and functional patient data.

Stroke, a major global health concern often rooted in cardiac dynamics, demands precise risk evaluation for targeted intervention. Current risk models, like the CHA 2 DS 2 -VASc score, often lack the granularity required for personalized predictions. In this study, we present a nuanced and thorough stroke risk assessment by integrating functional insights from cardiac magnetic resonance (CMR) with patient-specific computational fluid dynamics (CFD) simulations. Our cohort, evenly split between control and stroke groups, comprises eight patients. Utilizing CINE CMR, we compute kinematic features, revealing smaller left atrial volumes for stroke patients. The incorporation of patient-specific atrial displacement into our hemodynamic simulations unveils the influence of atrial compliance on the flow fields, emphasizing the importance of LA motion in CFD simulations and challenging the conventional rigid wall assumption in hemodynamics models. Standardizing hemodynamic features with functional metrics enhances the differentiation between stroke and control cases. While standalone assessments provide limited clarity, the synergistic fusion of CMR-derived functional data and patient-informed CFD simulations offers a personalized and mechanistic understanding, distinctly segregating stroke from control cases. Specifically, our investigation reveals a crucial clinical insight: normalizing hemodynamic features based on ejection fraction fails to differentiate between stroke and control patients. Differently, when normalized with stroke volume, a clear and clinically significant distinction emerges and this holds true for both the left atrium and its appendage, providing valuable implications for precise stroke risk assessment in clinical settings. This work introduces a novel framework for seamlessly integrating hemodynamic and functional metrics, laying the groundwork for improved predictive models, and highlighting the significance of motion-informed, personalized risk assessments.

Hydrodynamic cultivation of aeration-free oxygenic photogranules is favored by sufficient amounts of organic carbon.

Oxygenic photogranules (OPGs) have great potential for the aeration-free treatment of various wastewater, however, the effects of wastewater carbon composition on OPGs remain unknown. This study investigated the hydrodynamic photogranulation in three types of wastewater with the same total carbon concentration but different inorganic/organic carbon compositions, each operated at two replicated reactors. Results showed that photogranulation failed in reactors fed with only inorganic carbon. In reactors with equal inorganic and organic carbon, loose-structured OPGs formed but then disintegrated. Comparatively, reactors treating organic carbon-based wastewater obtained regular and dense OPGs with better settleability, lower effluent turbidity, excellent structural stability, and higher carbon assimilation rate. Sufficient amounts of organic carbon were crucial for the formation and stability of OPGs as they promoted the secretion of extracellular polymeric substances (EPS) and the growth of filamentous cyanobacteria. This study provides a basis for the startup of OPGs process and facilitates its large-scale application.

Beyond feast and famine: Cultivating hydrodynamic oxygenic photogranules with better performances under permanent feast regime.

Oxygenic photogranules (OPGs) are currently obtained in permanent famine or cyclic feast-famine regimes. Whether photogranulation occurs under a permanent feast regime and how these regimes impact OPGs are unknown. Herein, the three regimes, each applied in two replicate hydrodynamic reactors, were established by different feeding frequencies. Results showed that OPGs were successfully cultivated in all regimes after 24-36 days of photogranulation phases with similar microbial community functions, including filamentous gliding, extracellular polymeric substances production, and carbon/nitrogen metabolism. The OPGs were then operated under the same sequencing batch mode and all achieved efficient removal of chemical oxygen demand (>91 %), ammonium (>96 %), and total nitrogen (>76 %) after different adaptation periods (19-41 days). Notably, the permanent feast regime obtained OPGs with the best physicochemical properties, the shortest adaptation period, and the lowest effluent turbidity, thus representing a novel means of hydrodynamic cultivating OPGs with better performances for sustainable wastewater treatment.

Investigation of direct contact membrane distillation (DCMD) performance using CFD and machine learning approaches.

Direct Contact Membrane Distillation (DCMD) is emerging as an effective method for water desalination, known for its efficiency and adaptability. This study delves into the performance of DCMD by integrating two powerful analytical tools: Computational Fluid Dynamics (CFD) and Artificial Neural Networks (ANN). The research thoroughly examines the impact of various factors, such as inlet temperatures, velocities, channel heights, salt concentration, and membrane characteristics, on the process's efficiency, specifically calculating the water vapor flux. A rigorous validation of the CFD model aligns well with established studies, ensuring reliability. Subsequently, over 1000 data points reflecting variations in input factors are utilized to train and validate the ANN. The training phase demonstrated high accuracy, with near-zero mean squared errors and R2 values close to one, indicating a strong predictive capability. Further analysis post-ANN training shed light on key relationships: higher membrane porosity boosts water vapor flux, whereas thicker membranes reduce it. Additionally, it was detailed how salt concentration, channel dimensions, inlet temperatures, and velocities significantly influence the distillation process. Finally, a mathematical model was proposed for water vapor flux as a function of key input factors. The results highlighted that salt mole fraction and hot water inlet temperature have the most effect on the water vapor flux. This comprehensive investigation contributes to the understanding of DCMD and emphasizes the potential of combining CFD and ANN for optimizing and innovating water desalination technology.

Analyzing of hydrodynamic stress and mass transfer requirements of a fermentation process carried out in a coaxial bioreactor: a scale-up study.

Fluid hydrodynamic stress has a deterministic effect on the morphology of filamentous fungi. Although the coaxial mixer has been recognized as a suitable gas dispersion system for minimizing inhomogeneities within a bioreactor, its performance for achieving enhanced oxygen transfer while operating at a reduced shear environment has not been investigated yet, specifically upon scale-up. Therefore, the influence of the impeller type, aeration rate, and central impeller retrofitting on the efficacy of an abiotic coaxial system containing a shear-thinning fluid was examined. The aim was to assess the hydrodynamic parameters, including stress, mass transfer, bubble size, and gas hold-up, upon conducting a scale-up study. The investigation was conducted through dynamic gassing-in, tomography, and computational fluid dynamics combined with population balance methods. It was observed that the coaxial bioreactor performance was strongly influenced by the agitator type. In addition, coaxial bioreactors are scalable in terms of shear environment and oxygen transfer rate.

Effect of incorporating modified pinhão starch in alginate-based hydrogel beads for encapsulation of bioactive compounds by hydrodynamic electrospray ionization jetting.

Known for its antioxidant properties, Araucaria angustifolia bracts extract was encapsulated using hydrodynamic electrospray ionization jetting within calcium alginate cross-linked hydrogel beads with varying contents of modified pinhão starch. The rheological properties of the dispersions and analysis of the physicochemical and digestive properties of encapsulated beads were studied. The results demonstrated that dispersions containing starch exhibited higher viscosity and reduced compliance values, indicating samples with stronger, more compact, and stable structures that are less susceptible to deformation. This was confirmed by the beads rupture strength test. The ATR-FTIR analysis suggest that no new chemical bonds were formed, with encapsulation being responsible only for physical interactions between the functional groups of the polymers used and the active groups of the compounds present in the extract. The thermal stability of starch-containing beads was higher. Total tannins were higher in beads containing starch, with 53.61 %, 56.83 %, and 66.99 % encapsulation yield for samples with 2 %, 4 %, and 6 % starch, respectively, and the remaining antioxidant activity ranged from 96.04 % to 81.08 %. In vitro gastrointestinal digestion simulation indicated that the highest releases occurred in the intestinal phase, ranging from 60.72 % to 63.50 % for the release of total phenolic compounds.

Transient Performance Analysis of Centrifugal Left Ventricular Assist Devices Coupled With Windkessel Model: Large Eddy Simulations Study on Continuous and Pulsatile Flow Operation.

Computational fluid dynamics (CFD) simulations are widely used to develop and analyze blood-contacting medical devices such as left ventricular assist devices (LVADs). This work presents an analysis of the transient behavior of two centrifugal LVADs with different designs: HeartWare VAD and HeartMate3. A scale-resolving methodology is followed through Large Eddy Simulations, which allows for the visualization of turbulent structures. The three-dimensional (3D) LVAD models are coupled to a zero-dimensional (0D) 2-element Windkessel model, which accounts for the vascular resistance and compliance of the arterial system downstream of the device. Furthermore, both continuous- and pulsatile-flow operation modes are analyzed. For the pulsatile conditions, the artificial pulse of HeartMate3 is imposed, leading to a larger variation of performance variables in HeartWare VAD than in HeartMate3. Moreover, CFD results of pulsatile-flow simulations are compared to those obtained by accessing the quasi-steady maps of the pumps. The quasi-steady approach is a predictive tool used to provide a preliminary approximation of the pulsatile evolution of flow rate, pressure head, and power, by only imposing a speed pulse and vascular parameters. This preliminary quasi-steady solution can be useful for deciding the characteristics of the pulsatile speed law before running a transient CFD simulation, as the former entails a significant reduction in computational cost in comparison to the latter.

Characterization of semi-packed columns with different cross section in high-pressure gas chromatography.

Hydrodynamics, efficiency, and loading capacity of two semi-packed columns with different cross sections (NANO 315 µm x 18 µm; CAP 1000 µm x 28 µm) and similar pillar diameter and pillar-pillar distance (respectively 5 µm and 2.5 µm) have been compared in high-pressure gas chromatography. A flow prediction tool has been first designed to determine pressure variations and hold-up time across the chromatographic system taking into account the rectangular geometry of the ducts into the semi-packed columns. Intrinsic values of Height Equivalent to Theoretical Plate were determined for NANO and CAP columns using helium as carrier gas and similar values have been obtained (30 µm) for the two columns. Loading capacity of semi-packed columns were determined for decane at 70 °C using helium, and the highest value was obtained from CAP column (larger cross section and stationary phase content). Finally, significant HETP improvement (down to 15 µm) and peak shape were observed when carbon dioxide was used as carrier gas, suggesting mobile phase adsorption on stationary phase in high pressure conditions.

Validation of a CFD model for cell culture bioreactors at large scale and its application in scale-up.

Among all the operating parameters that control the cell culture environment inside bioreactors, appropriate mixing and aeration are crucial to ensure sufficient oxygen supply, homogeneous mixing, and CO2 stripping. A model-based manufacturing facility fit approach was applied to define agitation and bottom air flow rates during the process scale-up from laboratory to manufacturing, of which computational fluid dynamics (CFD) was the core modeling tool. The realizable k-ε turbulent dispersed Eulerian gas-liquid flow model was established and validated using experimental values for the volumetric oxygen transfer coefficient (kLa). Model validation defined the process operating parameter ranges for application of the model, identified mixing issues (e.g., impeller flooding, dissolved oxygen gradients, etc.) and the impact of antifoam on kLa. Using the CFD simulation results as inputs to the models for oxygen demand, gas entrance velocity, and CO2 stripping aided in the design of the agitation and bottom air flow rates needed to meet cellular oxygen demand, control CO2 levels, mitigate risks for cell damage due to shear, foaming, as well as fire hazards due to high O2 levels in the bioreactor gas outlet. The recommended operating conditions led to the completion of five manufacturing runs with a 100% success rate. This model-based approach achieved a seamless scale-up and reduced the required number of at-scale development batches, resulting in cost and time savings of a cell culture commercialization process.

Ecological inferences on invasive carp survival using hydrodynamics and egg drift models.

Bighead carp (Hypophthalmichthys nobilis), silver carp (H. molitrix), black carp (Mylopharyngodon piceus), and grass carp (Ctenopharyngodon idella), are invasive species in North America. However, they hold significant economic importance as food sources in China. The drifting stage of carp eggs has received great attention because egg survival rate is strongly affected by river hydrodynamics. In this study, we explored egg-drift dynamics using computational fluid dynamics (CFD) models to infer potential egg settling zones based on mechanistic criteria from simulated turbulence in the Lower Missouri River. Using an 8-km reach, we simulated flow characteristics with four different discharges, representing 45-3% daily flow exceedance. The CFD results elucidate the highly heterogeneous spatial distribution of flow velocity, flow depth, turbulence kinetic energy (TKE), and the dissipation rate of TKE. The river hydrodynamics were used to determine potential egg settling zones using criteria based on shear velocity, vertical turbulence intensity, and Rouse number. Importantly, we examined the difference between hydrodynamic-inferred settling zones and settling zones predicted using an egg-drift transport model. The results indicate that hydrodynamic inference is useful in determining the 'potential' of egg settling, however, egg drifting paths should be taken into account to improve prediction. Our simulation results also indicate that the river turbulence does not surpass the laboratory-identified threshold to pose a threat to carp eggs.