Direct Construction of Catechol Lignin for Engineering Long-Acting Conductive, Adhesive, and UV-Blocking Hydrogel Bioelectronics.

Long-active conductivity, adhesiveness, and environmental stability are essential in the applications of hydrogel electronics. Integrating different functional materials into one system suffers from compatibility and cost problems. Inspired by the unique o-methoxyl structure in polyphenol lignin and its binding role in plants, catechol lignin (DAL) is constructed by one-step demethylation, which endows the lignin with a mussel-like bioadhesion, good reducibility, as well as a high ultraviolet absorption. The DAL is then applied to reduced graphene oxide, and the products-the oxidized DAL and the reduced graphene oxide mixture (DAL/rGO) is added into a sodium alginate/polyacrylamide (SA/PAM) double network hydrogel. Based on the Schiff base reaction between the quinone of the oxidized DAL and the amino of the skin, the DAL/rGO incorporated hydrogels could stably adhere to the skin, and sensitively respond to physiological signals. In addition, the DAL could provide the hydrogels with long-active sunscreen property when applied to real skin. These DAL based hydrogels have potential for on-skin sensing and outdoor sport equipment.

Light-driven dissipative self-assembly of a peptide hydrogel.

Light energy provides an attractive fuel source for energy dissipating systems because of the lack of waste production, wavelength tunability and the potential for spatial and temporal resolution. In this work, we describe a peptide-spiropyran conjugate that assembled into a transient nanofiber hydrogel in the presence of visible light, and dissociated when the light source was removed.

Physicochemical and biological characterization of a xanthan gum-polyvinylpyrrolidone hydrogel obtained by gamma irradiation.

Xanthan gum (XG) and polyvinylpyrrolidone (PVP) are two polymers with low toxicity, high biocompatibility, biodegradability, and high hydrophilicity, making them promising candidates for multiple medical aspects. The present work aimed to synthesize a hydrogel from a mixture of XG and PVP and crosslinked by gamma irradiation. We assessed the hydrogel through a series of physicochemical (FT-IR, TGA, SEM, and percentage of swelling) and biological (stability of the hydrogel in cell culture medium) methods that allowed to determine its applicability. The structural evaluation by infrared spectrum demonstrated that a crosslinked hydrogel was obtained from the combination of polymers. The calorimetric test and swelling percentage confirmed the formation of the bonds responsible for the crosslinked structure. The calorimetric test evidenced that the hydrogel was resistant to decomposition in contrast to non- irradiated material. The determination of the swelling degree showed constant behavior over time, indicating a structure resistant to hydrolysis. This phenomenon also occurred during the test of stability in a cell culture medium. Additionally, microscopic analysis of the sample revealed an amorphous matrix with the presence of porosity. Thus, the findings reveal the synthesis of a novel material that has desirable attributes for its potential application in pharmaceutical and biomedical areas.

Biological applications of nanocomposite hydrogels prepared by gamma-radiation copolymerization of acrylic acid (AAc) onto plasticized starch (PLST)/montmorillonite clay (MMT)/chitosan (CS) blends.

In this work, nanocomposite hydrogels were prepared by gamma-radiation copolymerization of acrylic acid (AAc) onto plasticized starch (PLST)/montmorillonite clay (MMT)/chitosan (CS) blends. The effect of irradiation dose and MMT nanoparticle contents on the gel fraction and water absorption characters of PAAc-co-(PLST/MMT/CS) hydrogels was investigated. In addition, the structure-property behavior of the nanocomposite hydrogels was characterized by FTIR spectroscopy, thermogravimetric analysis (TGA) and X-ray diffraction (XRD). The study showed that the appropriate dose of gamma irradiation to achieve homogeneous nanocomposite hydrogels films and the highest absorption in water was 15 kGy, regardless of composition. The introduction of MMT up to 5-wt (%) improved the physical properties and enhanced the drug uptake-release characters. The effect of the nanocomposite hydrogels on skin wound healing were evaluated by rat models, taking sulfanilamide as a model drug. The profiles of rat skin after different time intervals up 21 days revealed that wounds treated with the copolymer hydrogels were healed faster which it may considered as a potential candidate for wound dressing materials.

Bifunctional Smart Hydrogel Dressing with Strain Sensitivity and NIR-Responsive Performance.

Smart response hydrogel has a broad application prospect in human health real-time monitoring due to its responses to a variety of stimuli. In this study, we developed a novel smart hydrogel dressing based on conductive MXene nanosheets and a temperature-sensitive PNIPAm polymer. γ-Methacryloxypropyltrimethoxysilane (KH570) was selected to functionalize the surface of MXene further to improve the interface compatibility between MXene and PNIPAm. Our prepared K-M/PNIPAm hydrogel was found to have a strain-sensitive property, as well as a respond to NIR phase change and volume change. When applied as a strain flexible sensor, this K-M/PNIPAm hydrogel exhibited a high strain sensitivity with a gauge factor (GF) of 4.491, a broad working strain range of ≈250%, a fast response of ∼160 ms, and good cycle stability (i.e., 3000 s at 20% strain). Besides, this K-M/PNIPAm hydrogel can be used as an efficient NIR light-controlled drug release carrier to achieve on-demand drug release. This work paved the way for the application of smart response hydrogel in human health real-time monitoring and NIR-controlled drug release functions.

Cationic Photothermal Hydrogels with Bacteria-Inhibiting Capability for Freshwater Production via Solar-Driven Steam Generation.

Solar-driven steam generation has been recognized as a sustainable and low-cost solution to freshwater scarcity using abundant solar energy. To harvest freshwater, various interfacial evaporators with rational designs of photothermal materials and structures have been developed concentrating on increasing the evaporation rate in the past few years. However, pathogenic microorganism accumulation on the evaporators by long-duration contact with natural water resources may lead to the deterioration of water transportation and the reduction of the evaporation rate. Here, we develop cationic photothermal hydrogels (CPHs) based on [2-(methacryloyloxy)ethyl]trimethylammonium chloride (METAC) and photothermal polypyrrole (PPy) with bacteria-inhibiting capability for freshwater production via solar-driven steam generation. A rapid water evaporation rate of 1.592 kg m-2 h-1 under simulated solar irradiation is achieved with CPHs floating on the water surface. Furthermore, we find that CPHs possess nearly 100% antibacterial performance against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus). The significant bacteria-inhibiting capability is mainly attributed to the large number of ammonium groups on the CPH network. Moreover, we show that CPHs exhibit good applicability with stable evaporation in natural lake water over 2 weeks, and the number of bacteria in purified lake water is significantly reduced. The device based on CPHs can achieve ∼0.49 kg m-2 h-1 freshwater production from lake water under natural sunlight. This study provides an attractive strategy for the evaporator to inhibit biological contamination and a potential way for long-term stable freshwater production from natural water resources in practical application.

Property Regulation of Conjugated Oligoelectrolytes with Polyisocyanide to Achieve Efficient Photodynamic Antibacterial Biomimetic Hydrogels.

Fabricating antibacterial hydrogels with antimicrobial drugs and synthetic biocompatible biomimetic hydrogels is a promising strategy for practical medical applications. Here, we report a bicomponent hydrogel composed of a biomimetic polyisocyanopetide (PIC) hydrogel and a photodynamic antibacterial membrane-intercalating conjugated oligoelectrolyte (COE). The aggregation behavior and aggregate size of the COEs in water can be regulated using the PIC hydrogel, which could induce COEs with higher reactive oxygen species (ROS) production efficiency and increased association of COEs toward bacteria, therefore enhancing the antibacterial efficiency. This strategy provides a facile method for developing biomimetic hydrogels with high antibacterial capability.

Ionic Carbazole-Based Water-Soluble Two-Photon Photoinitiator and the Fabrication of Biocompatible 3D Hydrogel Scaffold.

Two-photon polymerization of a three-dimensional (3D) hydrogel structure has been widely applied in biological tissue engineering. For improving the biocompatibility of hydrogel structures, a new kind of ionic carbazole water-soluble photoinitiator was prepared to realize the fabrication of a 3D hydrogel structure in aqueous phase. 3,6-Bis[2-(1-methyl-pyridinium)vinyl]-9-methyl-carbazole diiodide (BMVMC) and cucurbit[7]uril (CB7) have been employed to generate a complex with better water solubility by host-guest interactions. The binding ratio of the complex was demonstrated to be 1:1 through the characterization of isothermal titration calorimetry (ITC). The two-photon absorption (TPA) cross section of the complex increases to 2500 GM compared with the 750 GM of the BMVMC molecule. Then, an aqueous-phase photoresist was obtained using the CB7/BMVMC complex as the photoinitiator and poly(ethylene glycol) diacrylate (PEGda) as the hydrogel monomer. Two-photon fabrication capability in aqueous phase has been studied using the as-prepared photoresist. A low laser threshold of 3.7 mW as well as a high resolution of 180 nm are achieved. Benefiting from the fluorescence properties of the photoinitiator, we can achieve the confocal fluorescence images without any assistance of fluorescent probes. Subsequently, a 3D engineered hydrogel scaffold microstructure was fabricated by the two-photon polymerization technology, whose biocompatibility was demonstrated by culturing the structure with living cells of L929. The BMVMC-CB7 complex and the as-prepared photoresist are demonstrated to have good biocompatibility, which is prospective for further application in tissue engineering.

Cellulose nanocrystals reinforced highly stretchable thermal-sensitive hydrogel with ultra-high drug loading.

Hydrogels often have poor mechanical properties which limit their application in load-bearing tissues such as muscle and cartilage. In this work, a near-infrared light-triggered stretchable thermal-sensitive hydrogel with ultra-high drug loading was developed by a combination of natural polymeric nanocrystals, a network of synthetic thermo-responsive polymer, and magnetic Fe3O4 nanoparticles. The hydrogels comprise cellulose nanocrystals (CNCs) decorated with Fe3O4 nanoparticles (Fe3O4/CNCs) dispersed homogeneously in poly(N-isopropylacrylamide) (PNIPAm) networks. The composite hydrogels exhibit an extensibility of 2200%. Drug loading of vancomycin (VCM) reached a high value of 10.18 g g-1 due to the dispersion of Fe3O4/CNCs and the interactions between the CNCs and the PNIPAm network. Importantly, the hydrogels demonstrated a thermo-response triggered by NIR, with the temperature increasing from 26 to 41 °C within 60 s. The hydrogels have high biocompatibility evidenced by cell proliferation tests, illustrating that these hydrogels are promising as dressings for wound closure, and wound healing.

Spatiotemporal patterning of photoresponsive DNA-based hydrogels to tune local cell responses.

Understanding the spatiotemporal effects of surface topographies and modulated stiffness and anisotropic stresses of hydrogels on cell growth remains a biophysical challenge. Here we introduce the photolithographic patterning or two-photon laser scanning confocal microscopy patterning of a series of o-nitrobenzylphosphate ester nucleic acid-based polyacrylamide hydrogel films generating periodically-spaced circular patterned domains surrounded by continuous hydrogel matrices. The patterning processes lead to guided modulated stiffness differences between the patterned domains and the surrounding hydrogel matrices, and to the selective functionalization of sub-regions of the films with nucleic acid anchoring tethers. HeLa cells are deposited on the circularly-shaped domains functionalized with the MUC-1 aptamers. Initiation of the hybridization chain reaction by nucleic acid tethers associated with the continuous hydrogel matrix results in stress-induced ordered orthogonal shape-changes on the patterned domains, leading to ordered shapes of cell aggregates bound to the patterns.

Impact of high-energy electron irradiation on mechanical, structural and chemical properties of agarose hydrogels.

Due to their excellent biocompatibility and biodegradability, natural hydrogels are highly demanded biomaterials for biomedical applications such as wound dressing, tissue engineering, drug delivery or three dimensional cell culture. Highly energetic electron irradiation up to 10 MeV is a powerful and fast tool to sterilize and tailor the material's properties. In this study, electron radiation treatment of agarose hydrogels was investigated to evaluate radiation effects on physical, structural and chemical properties. The viscoelastic behavior, surface hydrophilicity and swelling behavior in a range of typical sterilization doses of 0 kGy to 30 kGy was analyzed. The mechanical properties were determined by rheology measurements and decreased by more than 20% compared to the initial moduli. The number average molecular weight between crosslinks was estimated based on rubber elasticity theory to judge on the radiation degradation. In this dose range, the number average molecular weight between crosslinks increased by more than 6%. Chemical structure was investigated by FTIR spectroscopy to evaluate the radiation resistance of agarose hydrogels. With increasing electron dose, an increasing amount of carbonyl containing species was observed. In addition, irradiation was accompanied by formation of gas cavities in the hydrogels. The gas products were specified for CO2, CO and H2O. Based on the radiolytic products, a radiolysis mechanism was proposed. Electron beam treatment under high pressure conditions was found to reduce gas cavity formation in the hydrogels.

High-Preservation Single-Cell Operation through a Photo-responsive Hydrogel-Nanopipette System.

Single-cell and in situ cell-based operation with nanopipette approach offers a possibility to elucidate the intracellular processes and may aid the improvement of therapy efficiency and precision. We present here a photo-responsive hydrogel-nanopipette hybrid system that can achieve single-cell operation with high spatial/temporal resolution and negligible cell damage. This strategy overcomes long-time obstacles in nanopipette single-cell studies as high electric potential (ca. 1000 mV) or organic solvent is always used during operations, which would inevitably impose disturbance and damage to targeted cells. The light-triggered system promotes a potential-free, non-invasive single-cell injection, resulting in a well-retained cell viability (90 % survival rate). Moreover, the photo-driven injection enables a precisely dose-controllable single-cell drug delivery. Significantly reduced lethal doses of doxorubicin (163-217 fg cell-1 ) are demonstrated in corresponding cell lines.

Biomimetic poly(γ-glutamic acid) hydrogels based on iron (III) ligand coordination for cartilage tissue engineering.

For the problems in the research on differentiation of mesenchymal stem cells (BMSCs), such as poor differentiation tendency and low differentiation efficiency, a novel photo-crosslinked extracellular matrix (ECM) inspired double network hydrogel that composed of poly(γ-glutamic acid) (γ-PGA) hydrogel and Fe3+ ligand coordination was designed and manufactured. Compared with those traditional γ-PGA based hydrogels, the introduction of Fe3+ significantly enhanced the mechanical properties of the hydrogel and accelerated the chondrogenesis efficiency of BMSCs chondrogenesis. The experimental results confirmed that the mechanical properties of hydrogel enhanced by the introduction of metal ions Fe3+ could promote BMSCs proliferation, induce cartilage-specific gene expression, and increase secretion of hydroxyproline (HYP) and glycosaminoglycan (GAG). As a result, this method could promote chondrogenic differentiation of BMSCs, accelerate the regeneration of cartilage, and was prospective to be conducive to the research work of cartilage defect repair. Thus, the mechanically enhanced γ-PGA hydrogel scaffold by Fe3+ could mediate BMSCs differentiation and provide a scientific and theoretical basis for research and development of biomedical materials on cartilage tissue engineering field.

Construction of a Mesoporous Polydopamine@GO/Cellulose Nanofibril Composite Hydrogel with an Encapsulation Structure for Controllable Drug Release and Toxicity Shielding.

The development of intelligent and multifunctional hydrogels having photothermal properties, good mechanical properties, sustained drug release abilities with low burst release, antibacterial properties, and biocompatibility is highly desirable in the biomaterial field. Herein, mesoporous polydopamine (MPDA) nanoparticles wrapped with graphene oxide (GO) were physically cross-linked in cellulose nanofibril (CNF) hydrogel to obtain a novel MPDA@GO/CNF composite hydrogel for controllable drug release. MPDA nanoparticles exhibited a high drug loading ratio (up to 35 wt %) for tetracycline hydrochloride (TH). GO was used to encapsulate MPDA nanoparticles for extending the drug release time and reinforcing the physical strength of the obtained hydrogel. The mechanical strength of the as-fabricated MPDA@GO/CNF composite hydrogel was five times greater compared to that of the pure CNF hydrogel. Drug release experiments demonstrated that burst release behavior was significantly reduced by adding MPDA@GO. The drug release time of the MPDA@GO/CNF composite hydrogel was 3 times and 7.2 times longer than that of the polydopamine/CNF hydrogel and pure CNF hydrogel, respectively. The sustained and controlled drug release behaviors of the composite hydrogel were highly dependent on the proportion of MPDA and GO. Moreover, the rate of drug release could be accelerated by near-infrared (NIR) light irradiation and pH value change. The drug release kinetics of the as-prepared composite hydrogel was well described by the Korsmeyer-Peppas model, and the drug release mechanism of TH from the composite hydrogel was anomalous transport. Importantly, this carefully designed MPDA@GO/CNF composite hydrogel showed good biocompatibility through an in vitro cytotoxicity test. In particular, the toxicity of GO was well shielded by the CNF hydrogel. Therefore, this novel MPDA@GO/CNF composite hydrogel with an encapsulation structure for controllable drug release and toxicity shielding of GO could be used as a very promising controlled drug delivery carrier, which may have potential applications for chemical and physical therapies.

Femtosecond laser programmed artificial musculoskeletal systems.

Natural musculoskeletal systems have been widely recognized as an advanced robotic model for designing robust yet flexible microbots. However, the development of artificial musculoskeletal systems at micro-nanoscale currently remains a big challenge, since it requires precise assembly of two or more materials of distinct properties into complex 3D micro/nanostructures. In this study, we report femtosecond laser programmed artificial musculoskeletal systems for prototyping 3D microbots, using relatively stiff SU-8 as the skeleton and pH-responsive protein (bovine serum albumin, BSA) as the smart muscle. To realize the programmable integration of the two materials into a 3D configuration, a successive on-chip two-photon polymerization (TPP) strategy that enables structuring two photosensitive materials sequentially within a predesigned configuration was proposed. As a proof-of-concept, we demonstrate a pH-responsive spider microbot and a 3D smart micro-gripper that enables controllable grabbing and releasing. Our strategy provides a universal protocol for directly printing 3D microbots composed of multiple materials.

Hybrid Hydrogels for Synergistic Periodontal Antibacterial Treatment with Sustained Drug Release and NIR-Responsive Photothermal Effect.

BACKGROUND: Periodontal pathogenic bacteria promote the destruction of periodontal tissues and cause loosening and loss of teeth in adults. However, complete removal of periodontal pathogenic bacteria, at both the bottom of the periodontal pocket and the root bifurcation area, remains challenging. In this work, we explored a synergistic antibiotic and photothermal treatment, which is considered an alternative strategy for highly efficient periodontal antibacterial therapy. METHODS: Mesoporous silica (MSNs) on the surface of Au nanobipyramids (Au NBPs) were designed to achieve the sustained release of the drug and photothermal antibacterials. The mesoporous silica-coated Au NBPs (Au NBPs@SiO2) were mixed with gelatin methacrylate (GelMA-Au NBPs@SiO2). Au NBPs@SiO2 and GelMA-Au NBPs@SiO2 hybrid hydrogels were characterized, and the drug content and photothermal properties in terms of the release profile, bacterial inhibition, and cell growth were investigated. RESULTS: The GelMA-Au NBPs@SiO2 hybrid hydrogels showed controllable minocycline delivery, and the drug release rates increased under 808 nm near-infrared (NIR) light irradiation. The hydrogels also exhibited excellent antibacterial properties, and the antibacterial efficacy of the antibiotic and photothermal treatment was as high as 90% and 66.7% against Porphyromonas gingivalis (P. gingivalis), respectively. Moreover, regardless of NIR irradiation, cell viability was over 80% and the concentration of Au NBPs@SiO2 in the hybrid hydrogels was as high as 100 µg/mL. CONCLUSION: We designed a new near-infrared light (NIR)-activated hybrid hydrogel that offers both sustained release of antibacterial drugs and photothermal treatment. Such sustained release pattern yields the potential to rapidly eliminate periodontal pathogens in the periodontal pocket, and the photothermal treatment maintains low bacterial retention after the drug treatment.

Visible Light-Curable Hydrogel Systems for Tissue Engineering and Drug Delivery.

Visible light-curable hydrogels have been investigated as tissue engineering scaffolds and drug delivery carriers due to their physicochemical and biological properties such as porosity, reservoirs for drugs/growth factors, and similarity to living tissue. The physical properties of hydrogels used in biomedical applications can be controlled by polymer concentration, cross-linking density, and light irradiation time. The aim of this review chapter is to outline the results of previous research on visible light-curable hydrogel systems. In the first section, we will introduce photo-initiators and mechanisms for visible light curing. In the next section, hydrogel applications as drug delivery carriers will be emphasized. Finally, cellular interactions and applications in tissue engineering will be discussed.

Azobenzene-grafted carboxymethyl cellulose hydrogels with photo-switchable, reduction-responsive and self-healing properties for a controlled drug release system.

In this study, multifunctional hydrogels containing host-guest complex formation between azobenzene-grafted carboxymethyl cellulose (CMC-Azo) and ß-cyclodextrin (CD) dimers connected by disulfide bonds with agarose for structural support were prepared. The obtained hydrogels exhibited self-healing properties by host-guest complexation as well as gel-sol phase transition in response to ultraviolet (UV) light and reducing agents. Photo-switchable properties of the hydrogels depend on changes in the complex formation of CD-dimers through the trans(450 nm) to cis(365 nm) photo-isomerization of azobenzene. The tensile and strain sweep tests confirmed that the hydrogel's self-healing ability was 79.44% and 81.59%, respectively. In addition, drug release from the hydrogels was controlled to accelerate to 80% in 3 h using UV light or reducing agent. Since the suggested photo-switchable, reduction-responsive, and self-healable hydrogels are non-cytotoxic, they can be potentially applied as biomedical materials in the development of hydrogel-based drug release systems.

Temperature/near-infrared light-responsive conductive hydrogels for controlled drug release and real-time monitoring.

Stimuli-responsive hydrogels with adaptable physical properties show great potential in the biomedical field. In particular, the collection of electrical signals is essential for precision medicine. Here, a simple strategy is demonstrated for achieving controlled drug release and real-time monitoring using an interpenetrating binary network consisting of a graphene aerogel and a poly(N-isopropylacrylamide) hydrogel with incorporated polydopamine nanoparticles (PDA-NPs). Owing to the good physical properties of graphene and the embedded PDA-NPs, the hybrid hydrogel shows enhanced mechanical properties and good electrical conductivity. In addition, the hybrid hydrogel also shows dual thermo- and near-infrared light responsiveness, as revealed by the controlled release of a model drug. In addition, as the hydrogel exhibits detectable changes in resistance during drug release, the drug-release behavior of the hydrogel can be monitored in real time using electrical signals. Moreover, owing to the abundance of catechol groups on the PDA-NPs, the hybrid hydrogel shows good tissue adhesiveness, as demonstrated using in vivo experiments. Thus, the developed hybrid hydrogel exhibits considerable practical applicability for drug delivery and precision medicine.

Stereolithography 3D Bioprinting.

Stereolithography (SLA) 3D bioprinting has emerged as a prominent bioprinting method addressing the requirements of complex tissue fabrication. This chapter addresses the advancement in SLA 3D bioprinting in concurrent with the development of novel photocrosslinkable biomaterials with enhanced physical and chemical properties. We discuss the cytocompatible photoinitiators operating in the wide spectrum of the ultraviolet (UV) and the visible light and high-resolution dynamic mask projection systems with a suitable illumination source. The potential of SLA 3D bioprinting has been explored in various themes, like bone and neural tissue engineering and in the development of controlled microenvironments to study cell behavior. The flexible design and versatility of SLA bioprinting makes it an attractive bioprinting process with myriad possibilities and clinical applications.