3D computational anatomy of the scaphoid and its waist for use in fracture treatment.

BACKGROUND: A detailed understanding of scaphoid anatomy helps anatomic fracture reduction, and optimal screw position. Therefore, we analysed (1) the size and shape variations of the cartilage and osseous surface, (2) the distribution of volumetric bone mineral density (vBMD) and (3) if the vBMD values differ between a peripheral and a central screw pathway? METHODS: Forty-three fresh frozen hand specimens (17 females, 26 males) were analysed with high-resolution peripheral quantitative computed tomography (HR-pQCT) and dissected to compute a 3D-statistical osseous and cartilage surface model and a 3D-averaged vBMD model of the scaphoid. 3D patterns were analysed using principal component analysis (PCA). vBMD was analysed via averaging HR-pQCT grey values and virtual bone probing along a central and peripheral pathway. RESULTS: (1) PCA displayed most notable variation in length ranging from 1.7 cm (- 2SD) to 2.6 cm (mean) and 3.7 cm (+ 2SD) associated with differences of the width and configuration of the dorsal surface (curved and narrow (4 mm) to a wider width (9 mm)). (2) High vBMD was located in the peripheral zone. Lowest vBMD was observed in the centre and waist. (3) Virtual probing along a peripheral pathway near to the cartilage surfaces for the capitate and lunate allowed the center region to be bypassed, resulting in increased vBMD compared to a central pathway. CONCLUSION: High anatomical variations regarding the osseous and cartilage surfaces were associated with three distinct concentrically arranged zones with notable different vBMD. The complex scaphoid anatomy with its waist might alter the strategy of fracture fixation, education and research.

The Vascular Anatomy of the Scaphoid: New Discoveries Using Micro-Computed Tomography Imaging.

PURPOSE: The purpose of this study was to investigate the intraosseous vascular anatomy of the scaphoid using recent advances in micro-computed tomography (micro-CT) imaging and 3-dimensional reconstruction. We also studied the effect of scaphoid shape and screw position on the intraosseous vascular structure. METHODS: Thirteen upper extremities were injected with a contrast agent. The scaphoid bones were extracted and scanned using a micro-CT scanner. The vascular impact of screw insertion at various axes through the scaphoid was calculated and compared using the generated 3-dimensional models. The specimens were 3-dimensionally-printed and the morphology was assessed according to bone dimensions. A relationship between the internal vascular patterns and these morphological features was determined. RESULTS: All specimens received vascular inflow from the dorsal ridge forming a vascular network that supplied an average of 83% of the bone's volume. This network was supplemented in 4 specimens with volar vessels entering at the waist. Another network was identified, created by vessels entering volarly at the tubercle, which supplied the remainder of the scaphoid. One specimen did not receive any vessels at the tubercle. With regards to screw placement, screws placed in the central axis were the least disruptive to the internal vascularity, followed by the antegrade (dorsal) insertion axis. Two morphological bone types were identified: type I or full scaphoids and type II or slender scaphoids. Type I possessed a more robust internal vascular network than type II scaphoids. CONCLUSIONS: This study identifies 2 distinct types of scaphoid morphology with 1 of them having a less robust blood supply, which may prove to be related to development of nonunion, avascular necrosis, or Preiser disease. Central axis and antegrade (dorsal) screw fixation may be least disruptive to the internal blood supply. CLINICAL RELEVANCE: Safer fixation of the scaphoid bone may be achieved by knowledge of intraosseous vascular patterns.

Role of Ligament Stabilizers of the Proximal Carpal Row in Preventing Dorsal Intercalated Segment Instability: A Cadaveric Study.

BACKGROUND: Isolated injuries of the scapholunate interosseous ligament (SLIL) are insufficient to produce dorsal intercalated segment instability. There is no consensus about which additional ligamentous stabilizers are critical determinants of dorsal intercalated segment instability. The aim of this study was to evaluate the role of the long radiolunate (LRL), scaphotrapeziotrapezoid (STT), and dorsal intercarpal (DIC) ligaments in preventing dorsal intercalated segment instability. METHODS: Thirty fresh-frozen forearms were randomized to 5 ligament section sequences to study the SLIL, LRL, STT, and DIC ligaments. The DIC-lunate insertion (DIC) and scaphoid insertion (DIC) were studied separately; the DIC insertions on the trapezium and triquetrum were left intact. Loaded posteroanterior and lateral fluoroscopic images were obtained at baseline and repeated after each ligament was sectioned. After each sequence, the wrists were loaded cyclically (71 N). The radiolunate angle was measured with load. Dorsal intercalated segment instability was defined as an increase of >15° in the radiolunate angle compared with baseline. RESULTS: Division of the SLIL did not increase the radiolunate angle. Section of the SLIL+LRL or SLIL+DIC significantly increased the radiolunate angle but did not produce dorsal intercalated segment instability. Section of the SLIL+STT or SLIL+DIC+DIC produced dorsal intercalated segment instability. CONCLUSIONS: In order to produce dorsal intercalated segment instability, complete scapholunate injuries require the disruption of at least 1 critical ligament stabilizer of the scaphoid or lunate (the STT or DIC+DIC). CLINICAL RELEVANCE: When treating SLIL tears with dorsal intercalated segment instability, techniques to evaluate the volar and dorsal critical stabilizers of the proximal carpal row should be considered.

Scapho-Capitate Ratio for Estimation of Scaphoid Length.

Background: The failure of scaphoid reconstruction by restoring both length and shape may lead to carpal mal-alignment and progressive degenerative arthritis. The aim of our study is to find a reliable method to find out the scaphoid length without measuring the contralateral scaphoid. Methods: Three X-ray wrist views were collected for 51 patients without any signs suggesting any hand and wrist fractures. The scaphoid, capitate and 3rd metacarpal bone axes lengths and carpal height were measured by 4 hand surgeons separately. Results: The scapho-capitate ratio was 1.1 ± 0.084, 1.01 ± 0.084 and 0.92 ± 0.109 for lateral, postero-anterior with ulnar deviation and postero-anterior view respectively. The ulnar deviation view had the highest reliability. Conclusions: Scapho-capitate ratio estimation is an easy and accurate measure of normal scaphoid length in situations when the scaphoid is short. It is helpful for the estimation of the size of the bone graft that need for reconstruction of the scaphoid.

Volar Approach to Percutaneous Fixation of Acute Nondisplaced Fractures of the Scaphoid.

Scaphoid fractures typically occur in young, healthy males at the peak of their employment and productivity, and left untreated or inadequately treated will ultimately progress to nonunion and a "predictable" pattern of wrist arthritis and carpal collapse. Nonoperative treatment of these fractures requires prolonged cast immobilization, which can lead to wrist stiffness, loss of grip strength, muscle atrophy, and protracted loss of economic productivity. To prevent these devastating sequelae, percutaneous techniques for scaphoid fixation have been described and popularized; however, these techniques are technically demanding as optimal position of the compression screw is required to achieve bony union. The focus of this paper is to describe the indications, contraindications, and a series of reproducible, practical pearls to achieve ideal percutaneous scaphoid compression screw fixation of scaphoid waist and distal pole fractures.

[Anatomy and pathobiomechanics of the scaphoid]. / Anatomie und Pathobiomechanik des Skaphoids.

Among the carpal bones the scaphoid (Os scaphoideum) is the most important. The most frequent fracture of the carpus is a fracture of the scaphoid bone. The frequently occurring absence of healing of these fractures as well as unhealed ruptures of the ligament complex between the scaphoid and lunate, lead to the most severe biomechanical and thus the most severe clinical changes of the wrist. The detailed anatomy of the scaphoid, blood flow, ligament attachments, injury mechanisms and pathobiomechanics are described and illustrated.

An Anthropometric Assessment of the Proximal Hamate Autograft for Scaphoid Proximal Pole Reconstruction.

PURPOSE: Fragmentation of the scaphoid proximal pole secondary to avascular necrosis presents a difficult reconstructive problem. This anthropometric study assesses the utility of the ipsilateral proximal hamate for complete osteochondral scaphoid proximal pole reconstruction. METHODS: Twenty-nine cadaveric specimens underwent computed tomography scanning and 3-dimensional reconstruction of the carpus and distal radius. Scaphoid height was measured and a third of its height was used to simulate resection of the proximal scaphoid pole and extent of hamate autograft required. The proximal scaphoid and hamate were divided into 6 sections, and compared using an iterative point-to-point distance algorithm. Average distance between the scaphoid and the hamate surfaces was determined. An interbone algorithm was used to assess radioscaphoid joint congruency and articular contact surface of the native scaphoid compared with the scaphoid reconstructed with hamate autograft. RESULTS: The mean height of scaphoid proximal pole excision and proximal hamate autograft height was 9.3 mm. Comparing the morphology of the native scaphoid and hamate autografts, the absolute distances were the largest in the volar radioscaphoid, dorsal radioscaphoid, and dorsal scaphocapitate segments. Without osteotomy, the hamate autograft may cause impaction in the dorsal-radial aspect of the distal radius. The hamate autograft also shifted the articular contact point of the radioscaphoid joint toward the dorsal-radial position. Nine hamate autografts were classified as poor-fitting. Poor-fitting specimens had a greater radial styloid to distal radioulnar joint distance. These specimens also had wider hamates and scaphoids in the radial-ulnar dimension and wider scaphoids in the volar-dorsal dimension. Lunate type did not correspond to anthropometric fit. CONCLUSIONS: The proximal hamate osteochondral graft was poor fitting in 31% of cases (9 of 29 specimens). Wrists with radial-ulnar hamate width less than 10 mm, radial-ulnar scaphoid width less than 10 mm, and volar-dorsal scaphoid width less than 16 mm demonstrate better anthropometric fit. CLINICAL RELEVANCE: This study provides an anthropometric assessment of the recently described proximal hamate autograft, a new bone graft option for proximal scaphoid pole reconstruction.

The Quantitative Anatomy of the Dorsal Scapholunate Interosseous Ligament.

BACKGROUND: The anatomy of the scapholunate interosseous ligament (SLIL) has been described qualitatively in great detail, with recognition of the dorsal component's importance for carpal stability. The purpose of this study was to define the quantitative anatomy of the dorsal SLIL and to assess the use of high-frequency ultrasound to image the dorsal SLIL. METHODS: We used high-frequency ultrasound imaging to evaluate 40 wrists in 20 volunteers and recorded the radial-ulnar (length) and dorsal-volar (thickness) dimensions of the dorsal SLIL and the dimensions of the scapholunate interval. We assessed the use of high-frequency ultrasound by comparing the length and thickness of the dorsal SLIL on ultrasound evaluation and open dissection of 12 cadaveric wrists. Student's t test was used to assess the relationship between measurements obtained on cadaver ultrasound and open dissection. RESULTS: In the volunteer wrists, the mean dorsal SLIL length was 7.5 ± 1.4 mm and thickness was 1.8 ± 0.4 mm; the mean scapholunate interval was 5.0 mm dorsally and 2.5 mm centrally. In the cadaver wrists, there was no difference in dorsal SLIL length or thickness between ultrasound and open dissection. CONCLUSIONS: The dorsal SLIL is approximately 7.5 mm long and 1.8 mm thick. These parameters may be useful in treatment of SLIL injuries to restore the native anatomy. High-frequency ultrasound is a useful imaging technique to assess the dorsal SLIL, although further study is needed to assess the use of high-frequency ultrasound in detection of SLIL pathology.

Kinematics of the anthropoid os centrale and the functional consequences of scaphoid-centrale fusion in African apes and hominins.

In most primates, the os centrale is interposed between the scaphoid, trapezoid, trapezium, and head of the capitate, thus constituting a component of the wrist's midcarpal complex. Scaphoid-centrale fusion is among the clearest morphological synapomorphies of African apes and hominins. Although it might facilitate knuckle-walking by increasing the rigidity and stability of the radial side of the wrist, the exact functional significance of scaphoid-centrale fusion is unclear. If fusion acts to produce a more rigid radial wrist that stabilizes the hand and limits shearing stresses, then in taxa with a free centrale, it should anchor ligaments that check extension and radial deviation, but exhibit motion independent of the scaphoid. Moreover, because the centrale sits between the scaphoid and capitate (a major stabilizing articulation), scaphoid-centrale mobility should correlate with scaphocapitate mobility in extension and radial deviation. To test these hypotheses, the centrale's ligamentous binding was investigated via dissection in Pongo and Papio, and the kinematics of the centrale were quantified in a cadaveric sample of anthropoids (Pongo sp., Ateles geoffroyi, Colobus guereza, Macaca mulatta, and Papio anubis) using a computed-tomography-based method to track wrist-bone motion. Results indicate that the centrale rotates freely relative to the scaphoid in all taxa. However, centrale mobility is only correlated with scaphocapitate mobility during extension in Pongo-possibly due to differences in overall wrist configuration between apes and monkeys. If an extant ape-like wrist characterized early ancestors of African apes and hominins, then scaphoid-centrale fusion would have increased midcarpal rigidity in extension relative to the primitive condition. Although biomechanically consistent with a knuckle-walking hominin ancestor, this assumes that the trait evolved specifically for that biological role, which must be squared with contradictory interpretations of extant and fossil hominoid morphology. Regardless of its original adaptive significance, scaphoid-centrale fusion likely presented a constraint on early hominin midcarpal mobility.

Assessment of Usefulness of Anthropometric Data for Predicting the Scaphoid and the Screw Length: A New Technique.

BACKGROUND: Headless screw is frequently used for scaphoid fracture fixation. Aim of the study was to assess the correlation between the axial length of the scaphoid and the axial length of the middle phalanx of index, middle, ring and little finger so as to provide an indirect method to assess the length of the scaphoid and thereby the length of the screw. METHODS: Thirty five fresh frozen cadavers with seventy wrists and hands were dissected. The age, sex and side were recorded. The axial length of the scaphoid, axial length of the middle phalanx of index, middle, ring and little finger were recorded and a correlation was assessed. Five cadavers were randomly selected and radiographs of the hand were done. Pearson coefficient correlation was assessed between the axial length of the middle phalanx of ring finger on a radiograph and actual length of middle phalanx. RESULTS: A significant positive correlation was noted between the axial length of the scaphoid and the axial length of the middle phalanx of ring finger (r = 0.646), also a positive correlation between the axial length of middle phalanx of ring finger on a radiograph and the axial length of the scaphoid measured by vernier caliper (r = 0.91). CONCLUSIONS: A preoperative radiograph of the wrist with hand will help us indirectly assess the axial length of the scaphoid by measuring the axial length of the middle phalanx of ring finger.

Three-dimensional comparison of alternative screw positions versus actual fixation of scaphoid fractures.

PURPOSE: The recommended technique for the fixation of a scaphoid waist fracture involves a headless compression screw placed in the proximal fragment center. This is usually accomplished by placing a longitudinal axis screw as visualized by fluoroscopy. The screw length has been shown to have a biomechanical advantage. An alternative to these options, which has been debated in the literature, is a screw placed perpendicular to the fracture plane and in its center. The perpendicular screw may have a biomechanical advantage despite the fact that it may be shorter. This study examined the differences in location and length in actual patients between a screw in the center of the proximal fragment with a longitudinal axis screw, and the actual fixating screw. These were then compared to a perpendicular axis screw. METHODS: Pre- and post-operative CT scans of 10 patients with scaphoid waist fractures were evaluated using a 3D computer model. Comparisons were made between the length, location and angle of actual and virtual screw alternatives; namely, a screw along the central third of the proximal fragment (central screw axis) where the scaphoid longitudinal axis was calculated mathematically (longitudinal screw axis) and a screw placed at 90° to the fracture plane and in its center (perpendicular screw axis). RESULTS: The longitudinal axis screw was found to be significantly longer than the other axes (28.3mm). There was a significant difference between the perpendicular axis screw and the location and angle of the other screw axis, but it was only shorter than the longitudinal screw (23.6mm versus 25.5mm for the actual screw; ns.). CONCLUSIONS: A computed longitudinal axis screw is longer than a central or actual screw placed longitudinally by visual inspection by the surgeon. Although it needs to be placed using computer assisted (CAS) techniques, it may have the biomechanical advantages of a longer screw in a similar trajectory. The perpendicular screw was found to be significantly different in position and angle but not shorter than the actually placed screw. It has biomechanical advantages and does not require visualization with CAS methods, making it the more attractive alternative.

[Anatomy and biomechanics of the scaphoid]. / Anatomie und Biomechanik des Kahnbeins.

The scaphoid is biomechanically and clinically of great importance for function of the wrist. In the literature, its anatomy and biomechanics are clearly underrepresented as well as underestimated. In the following review the scaphoid will be presented in more detail, according to recent information and findings. Not only will the origin of the name and the history of previous names, such as cotyloid or navicular, be introduced, but also for the first time in medical literature the significant phylogeny and ontogeny of the scaphoid will be shown. Moreover, the clinically very important blood supply, the ligaments of the scaphoid and relevant biomechanical details will be described.

Estimating Scaphoid Lengths Using Anatomical Measurements in the Wrist.

PURPOSE: In reconstructive surgery of scaphoid nonunions with humpback deformity, some surgeons recommend restoration of the normal scaphoid length whereas others overexpand the normal length to ensure carpal realignment and prevent late collapse. To be able to define overexpansion and investigate which levels of overexpansion yield optimal clinical results, a precise method for estimating the original scaphoid length is required. The purpose of this anatomic study was to investigate the precision of estimating normal scaphoid lengths based on intact adjacent bone dimensions, compared with using the contralateral scaphoid length. METHODS: From bilateral computed tomographic scans of 28 healthy wrist pairs, 3-dimensional virtual bone models were created. The left and right scaphoid lengths were determined at the central axis. The capitate length at the central axis and the distal radius width served to derive an ipsilateral scaphoid length estimate. Estimation precision for individual cases was based on the 95% range (±1.96 × SD) of the observed differences between the actual and estimated lengths. RESULTS: On average, the capitate length was 10% smaller than the scaphoid length; the radius width was 9% larger. Consequently, we averaged the capitate length and radius width for ipsilateral estimations. The average difference between the scaphoid length and the latter ipsilateral estimate was 0.1 mm. The average contralateral scaphoid length difference was also 0.1 mm. Estimation precisions, however, were ±2.2 and ±1.4 mm, respectively. CONCLUSIONS: Scaphoid length estimation based on the contralateral scaphoid is more precise than the estimating scaphoid length using the ipsilateral radius and capitate. CLINICAL RELEVANCE: Scaphoid overexpansion can be ensured if the restored length is at least 1.4 mm longer than the contralateral length. This may be valuable information when establishing a target length for reconstruction and investigating the consequences of scaphoid overexpansion on clinical function, such as range of motion, which are currently unknown.

Scaphoid tuberosity excursion is minimized during a dart-throwing motion: A biomechanical study.

PURPOSE: The purpose of this study was to determine whether the excursion of the scaphoid tuberosity and therefore scaphoid motion is minimized during a dart-throwing motion. METHODS: Scaphoid tuberosity excursion was studied as an indicator of scaphoid motion in 29 cadaver wrists as they were moved through wrist flexion-extension, radioulnar deviation, and a dart-throwing motion. RESULTS: Study results demonstrate that excursion was significantly less during the dart-throwing motion than during either wrist flexion-extension or radioulnar deviation. CONCLUSION: If the goal of early wrist motion after carpal ligament or distal radius injury and reconstruction is to minimize loading of the healing structures, a wrist motion in which scaphoid motion is minimal should reduce length changes in associated ligamentous structures. Therefore, during rehabilitation, if a patient uses a dart-throwing motion that minimizes his or her scaphoid tuberosity excursion, there should be minimal changes in ligament loading while still allowing wrist motion. STUDY DESIGN: Bench research, biomechanics, and cross-sectional. LEVEL OF EVIDENCE: Not applicable. The study was laboratory based.

Anthropometry of the Human Scaphoid Waist by Three-Dimensional Computed Tomography.

Published measurements for the scaphoid are scarce. The purpose of this study is to define anthropometric norms for the waist of the scaphoid to assist in optimizing bone graft quantity and implant use. Computed tomography images of the wrist were reviewed by three surgeons. Anthropometric data were gathered, including the scaphoid waist diameter in two dimensions and the scaphoid waist volume. Each study was measured twice, allowing for determination of inter- and intraobserver reliability. Forty-three studies were examined (23 female and 20 male). Average measurements of the scaphoid waist were 11.28 ± 0.26 mm in the sagittal plane and 8.70 ± 0.17 mm in the coronal plane, and the waist volume was 715 ± 33.0 mm3. Specific measures of the narrowest portion of the scaphoid are provided by this study. Measurements of the scaphoid waist through the use of three-dimensional imaging are an accurate method with good inter- and intraobserver reliability. The measurements obtained from this study can be applied to guide graft and implant selection for treatment of scaphoid waist fractures and nonunions.

Three-Dimensional Assessment of Bilateral Symmetry of the Scaphoid: An Anatomic Study.

Preoperative 3D CT imaging techniques provide displacement analysis of the distal scaphoid fragment in 3D space, using the matched opposite scaphoid as reference. Its accuracy depends on the presence of anatomical bilateral symmetry, which has not been investigated yet using similar techniques. Our purpose was to investigate symmetry by comparing the relative positions of distal and proximal poles between sides. We used bilateral CT scans of 19 adult healthy volunteers to obtain 3D scaphoid models. Left proximal and distal poles were matched to corresponding mirrored right sides. The left-to-right positional differences between poles were quantified in terms of three translational and three rotational parameters. The mean (SD) of ulnar, dorsal, and distal translational differences of distal poles relative to proximal poles was 0.1 (0.6); 0.4 (1.2); 0.2 (0.6) mm and that of palmar rotation, ulnar deviation, and pronation differences was -1.1 (4.9); -1.5 (3.3); 1.0 (3.7)°, respectively. These differences did not significantly differ from zero and thus were not biased to left or right side. We proved that, on average, the articular surfaces of scaphoid poles were symmetrically aligned in 3D space. This suggests that the contralateral scaphoid can serve as reference in corrective surgery. No level of evidence is available.

The Palpable Scaphoid Surface Area in Various Wrist Positions.

PURPOSE: To determine the theoretical amount of surface area available for palpation of the scaphoid in various wrist positions and to provide a guide depicting which wrist position will expose proximal pole, waist, and distal pole fractures. METHODS: Using 3 fresh-frozen male cadaver wrists, we digitized palpable surface areas (dorsal, volar, and snuffbox) of the scaphoid in several wrist positions. The entire scaphoid was then excised and a digitized 3-dimensional reconstruction of the entire scaphoid was obtained. The 2 images were superimposed and the surface area was calculated RESULTS: The maximum palpable area of the scaphoid was achieved with the wrist in neutral extension and maximum ulnar deviation and the wrist in maximum flexion and neutral deviation. Neutral wrist extension and ulnar deviation exposed all but the most proximal portion of the proximal pole and the distal pole, which made this the ideal position to detect tenderness from a scaphoid waist fracture and larger proximal pole fractures. Maximum wrist flexion with neutral wrist deviation exposed the entire proximal pole, which made this the ideal position to detect tenderness from a proximal pole scaphoid fracture. CONCLUSIONS: Wrist position influences the amount of scaphoid surface area available for palpation and should be considered when examining a patient with a suspected scaphoid fracture. CLINICAL RELEVANCE: The scaphoid should be palpated in 3 anatomic regions with the wrist placed in different positions to maximally expose the anatomical region being palpated.

Scaphoid fractures.

Scaphoid fractures are the most common carpal bone fracture, usually occurring in young men, although the incidence in women has increased over the past decade. Snuffbox tenderness and/or pain with axial loading of the thumb should be treated as a scaphoid fracture until proved otherwise and the diagnosis confirmed with serial radiographs and/or advanced imaging. Nearly all displaced scaphoid fractures should undergo operative intervention to reduce the risk of nonunion. Nondisplaced fractures have high union rates with cast treatment, but require extended periods of immobilization. Consideration may be given to operative fixation of these fractures to allow early return to sport.

New concept of scapholunate dissociation treatment and novel modification of Brunelli procedure - anatomical study.

BACKGROUNDS: This paper describes a novel method in treatment of scapholunate dissociation accompanied with rotatory subluxation of the scaphoid. The idea of this method is to create a kind of axial lever that can fully reconstruct anatomical relationship between the scaphoid and the lunate, with no involvement of extrinsic ligaments, and with simultaneous restriction of pathological alignment of the scaphoid. Based on this technique, we have also proposed a new modification of Brunelli procedure in scapholunate dissociation with rotatory subluxation of the scaphoid and dorsal intercalated segmental instability. METHODS: At the initial stage of the study, 20 human wrists fixed in Ethanol were used, followed by 12 fresh human wrists used in part two. The first stage included functional, biomechanical and strength tests carried out by means of a 5 kg load and intended to find the most anatomical and durable treatment method. The second stage involved testing the proposed methods on fresh cadaver wrists. RESULTS: We have discovered that the new method is able to recreate anatomical forces and properties of scapholunate ligament; what's more, it can also prevent rotatory subluxation of the scaphoid. The performed strength tests have proven that it is possible to treat scapholunate instability also in case of dorsal intercalated segmental instability. CONCLUSIONS: We highly recommend using both the new technique and the new modification of Brunelli procedure for treatment of scapholunate dissociation in both dynamic and static instabilities.