Perception of the use and understanding of nutrition labels among different socioeconomic groups in Mexico: a qualitative study.

OBJECTIVE: To explore the perception of the use and comprehension of the nutrition labeling (GDA, NFT,NS) and claims in packaged foods among different socio economic-status (SES). MATERIALS AND METHODS: This was a qualitative study, 12 focus groups were performed in four cities of Mexico. Participants were recruited outside the supermarkets, which were selected according to SES using Basic Geostatistical Areas. The focus groups had a total of 78 participants. RESULTS: Participants perceived several barriers to the use and understanding of the GDA; like technicalities of the terms used, and the format (small font size and percentages). Claims are mistrusted in general. Participants from the high SES believed that the claims are just a marketing strategy. CONCLUSIONS: This study shows the consumers' difficulties to understand the current nutrition labeling system regardless SES. These data might call attention in order to implement a simpler nutrition labeling system that is understood regardless of SES.

OBJETIVO: Explorar la percepción sobre el uso y la comprensión del etiquetado de alimentos (GDA, NFT, NS) y sobre las declaraciones de alimentos empaquetados entre diferentes niveles socioeconómicos (NSE). MATERIAL Y MÉTODOS: Estudio cualitativo en el que se formaron 12 grupos focales en cuatro ciudades de México. Los participantes fueron reclutados afuera de supermercados y fueron seleccionados por nivel socioeconómico, a partir de Áreas Geoestadísticas Básicas. El número total de participantes fue 78. RESULTADOS: Los participantes percibieron barreras para el uso y comprensión del GDA como términos técnicos utilizados, fuente pequeña y porcentajes numéricos. Se reportó desconfianza hacia las declaraciones en alimentos empaquetados. Los participantes del NSE alto perciben que las declaraciones son estrategia de marketing. CONCLUSIONES: Este estudio muestra las dificultades para entender el etiquetado de alimentos actual entre diferentes NSE. Estos datos enfatizan la necesidad de implementar un etiquetado que sea comprendido entre NSE.

Perception of the use and understanding of nutrition labels among different socioeconomic groups in Mexico: a qualitative study / Percepción del uso y comprensión del etiquetado de alimentos en diferentes grupos socioeconómicos de México: un estudio cualitativo

Abstract: Objectiv: To explore the perception of the use and comprehension of the nutrition labeling (GDA, NFT, NS) and claims in packaged foods among different socio economic-status (SES). Materials and methods: This was a qualitative study, 12 focus groups were performed in four cities of Mexico. Participants were recruited outside the supermarkets, which were selected according to SES using Basic Geostatistical Areas. The focus groups had a total of 78 participants. Results: Participants perceived several barriers to the use and understanding of the GDA; like technicalities of the terms used, and the format (small font size and percentages). Claims are mistrusted in general. Participants from the high SES believed that the claims are just a marketing strategy. Conclusion: This study shows the consumers' difficulties to understand the current nutrition labeling system regardless SES. These data might call attention in order to implement a simpler nutrition labeling system that is understood regardless of SES.

Resumen: Objetivo: Explorar la percepción sobre el uso y la comprensión del etiquetado de alimentos (GDA, NFT, NS) y sobre las declaraciones de alimentos empaquetados entre diferentes niveles socioeconómicos (NSE). Material y métodos: Estudio cualitativo en el que se formaron 12 grupos focales en cuatro ciudades de México. Los participantes fueron reclutados afuera de supermercados y fueron seleccionados por nivel socioeconómico, a partir de Áreas Geoestadísticas Básicas. El número total de participantes fue 78. Resultados: Los participantes percibieron barreras para el uso y comprensión del GDA como términos técnicos utilizados, fuente pequeña y porcentajes numéricos. Se reportó desconfianza hacia las declaraciones en alimentos empaquetados. Los participantes del NSE alto perciben que las declaraciones son estrategia de marketing. Conclusión: Este estudio muestra las dificultades para entender el etiquetado de alimentos actual entre diferentes NSE. Estos datos enfatizan la necesidad de implementar un etiquetado que sea comprendido entre NSE.

Quantitative analysis of drug distribution by ambient mass spectrometry imaging method with signal extinction normalization strategy and inkjet-printing technology.

Quantitative mass spectrometry imaging (MSI) is a robust approach that provides both quantitative and spatial information for drug candidates' research. However, because of complicated signal suppression and interference, acquiring accurate quantitative information from MSI data remains a challenge, especially for whole-body tissue sample. Ambient MSI techniques using spray-based ionization appear to be ideal for pharmaceutical quantitative MSI analysis. However, it is more challenging, as it involves almost no sample preparation and is more susceptible to ion suppression/enhancement. Herein, based on our developed air flow-assisted desorption electrospray ionization (AFADESI)-MSI technology, an ambient quantitative MSI method was introduced by integrating inkjet-printing technology with normalization of the signal extinction coefficient (SEC) using the target compound itself. The method utilized a single calibration curve to quantify multiple tissue types. Basic blue 7 and an antitumor drug candidate (S-(+)-deoxytylophorinidine, CAT) were chosen to initially validate the feasibility and reliability of the quantitative MSI method. Rat tissue sections (heart, kidney, and brain) administered with CAT was then analyzed. The quantitative MSI analysis results were cross-validated by LC-MS/MS analysis data of the same tissues. The consistency suggests that the approach is able to fast obtain the quantitative MSI data without introducing interference into the in-situ environment of the tissue sample, and is potential to provide a high-throughput, economical and reliable approach for drug discovery and development.

Prevalence of work-related musculoskeletal injuries among South Indian hand screen-printing workers.

BACKGROUND: Hand screen-printing (HSP) plays a predominant role in textile industries in developing countries. Workers from HSP industry were mostly affected by musculoskeletal injury due to monotonous, and prolonged work nature and poor workplace environment. OBJECTIVE: The present study aims to investigate the prevalence of work-related musculoskeletal disorder (MSD) symptoms and risk factors associated among the HSP industry workers. METHODS: Cochran's sample size for categorical data was used to select 385 HSP workers of 1000 samples from various provinces of Tamil Nadu, INDIA. Modified Nordic based questionnaire was used to assess the musculoskeletal injuries and risk factors among HSP workers. RESULTS: The statistical analysis revealed that 62.5% workers are prone to MSD symptoms with lower back (75.1%), shoulder (66.2%), knees (58.7%), and ankle/feet (55.6%). Age, experience, marital status, stress in the job were the risk factors which significantly (p < 0.05) associated with the reported MSDs. Further, this study result infers that the subjects with higher age and experience are exposed higher levels of MSD prevalence of 85.5% and 92.0% respectively in past 12 months than other groups. Among the different work categories in HSP task, the workers reported with the maximum discomfort during printing work (63.1%) with Odds ratio as 10.38 and 95% CI is 6.18-17.4. than the material handling and drying task. CONCLUSIONS: Study results infer that HSP workers are prone to lower back and shoulder pain followed by knees and ankle feet regions. Socio-demographic factors, awkward posture and repetitive movements contribute to cause MSD among hand screen-printing workers.

Separation of pigment formulations by high-performance thin-layer chromatography with automated multiple development.

Food packaging is designed to provide sufficient protection for the respective filling, legally binding information for the consumers like nutritional facts or filling information, and an attractive appearance to promote the sale. For quality and safety of the package, a regular quality control of the used printing materials is necessary to get consistently good print results, to avoid migration of undesired ink components into the food and to identify potentially faulty ink batches. Analytical approaches, however, have hardly been considered for quality assurance so far due to the lack of robust, suitable methods for the analysis of rarely soluble pigment formulations. Thus, a simple and generic high-performance thin-layer chromatography (HPTLC) method for the separation of different colored pigment formulations was developed on HPTLC plates silica gel 60 by automated multiple development. The gradient system provided a sharp resolution for differently soluble pigment constituents like additives and coating materials. The results of multi-detection allowed a first assignment of the differently detectable bands to particular chemical substance classes (e.g., lipophilic components), enabled the comparison of different commercially available pigment batches and revealed substantial variations in the composition of the batches. Hyphenation of HPTLC with high resolution mass spectrometry and infrared spectroscopy allowed the characterization of single unknown pigment constituents, which may partly be responsible for known quality problems during printing. The newly developed, precise and selective HPTLC method can be used as part of routine quality control for both, incoming pigment batches and monitoring of internal pigment production processes, to secure a consistent pigment composition resulting in consistent ink quality, a faultless print image and safe products. Hyphenation of HPTLC with the A. fischeri bioassay gave first information on the bioactivity or rather on the toxicological potential of different compounds of the pigment formulations. The results of the bioassay might be helpful to choose pigment compositions that provide both, a high printing quality but at the same time guarantee a high consumer safety, especially in regard to smaller pigment components, which tend to migrate through the packaging.

[Ophthalmologic reading charts : Part 2: Current logarithmically scaled reading charts]. / Ophthalmologische Leseproben : Teil 2: Aktuelle, logarithmisch abgestufte Leseproben.

PURPOSE: To analyze currently available reading charts regarding print size, logarithmic print size progression, and the background of test-item standardization. METHODS: For the present study, the following logarithmically scaled reading charts were investigated using a measuring microscope (iNexis VMA 2520; Nikon, Tokyo): Eschenbach, Zeiss, OCULUS, MNREAD (Minnesota Near Reading Test), Colenbrander, and RADNER. Calculations were made according to EN-ISO 8596 and the International Research Council recommendations. RESULTS: Modern reading charts and cards exhibit a logarithmic progression of print sizes. The RADNER reading charts comprise four different cards with standardized test items (sentence optotypes), a well-defined stop criterion, accurate letter sizes, and a high print quality. Numbers and Landolt rings are also given in the booklet. The OCULUS cards have currently been reissued according to recent standards and also exhibit a high print quality. In addition to letters, numbers, Landolt rings, and examples taken from a timetable and the telephone book, sheet music is also offered. The Colenbrander cards use short sentences of 44 characters, including spaces, and exhibit inaccuracy at smaller letter sizes, as do the MNREAD cards. The MNREAD cards use sentences of 60 characters, including spaces, and have a high print quality. CONCLUSION: Modern reading charts show that international standards can be achieved with test items similar to optotypes, by using recent technology and developing new concepts of test-item standardization. Accurate print sizes, high print quality, and a logarithmic progression should become the minimum requirements for reading charts and reading cards in ophthalmology.

A Low-Cost Inkjet-Printed Glucose Test Strip System for Resource-Poor Settings.

BACKGROUND: The prevalence of diabetes is increasing in low-resource settings; however, accessing glucose monitoring is extremely difficult and expensive in these regions. Work is being done to address the multitude of issues surrounding diabetes care in low-resource settings, but an affordable glucose monitoring solution has yet to be presented. An inkjet-printed test strip solution is being proposed as a solution to this problem. METHODS: The use of a standard inkjet printer is being proposed as a manufacturing method for low-cost glucose monitoring test strips. The printer cartridges are filled with enzyme and dye solutions that are printed onto filter paper. The result is a colorimetric strip that turns a blue/green color in the presence of blood glucose. RESULTS: Using a light-based spectroscopic reading, the strips show a linear color change with an R(2) = .99 using glucose standards and an R(2) = .93 with bovine blood. Initial testing with bovine blood indicates that the strip accuracy is comparable to the International Organization for Standardization (ISO) standard 15197 for glucose testing in the 0-350 mg/dL range. However, further testing with human blood will be required to confirm this. A visible color gradient was observed with both the glucose standard and bovine blood experiment, which could be used as a visual indicator in cases where an electronic glucose meter was unavailable. CONCLUSIONS: These results indicate that an inkjet-printed filter paper test strip is a feasible method for monitoring blood glucose levels. The use of inkjet printers would allow for local manufacturing to increase supply in remote regions. This system has the potential to address the dire need for glucose monitoring in low-resource settings.

Printed radiographs--is what you see what you get?

UNLABELLED: Digital dental radiography allows for exchange of images between primary and secondary care. However, it is common practice for radiographs to be printed out and attached to referrals.This study investigates the loss of diagnostic information of printed radiographs compared to the on-screen digital image.The best quality was achieved with images printed onto radiographic film or onto photographic paper with an inkjet printer. Laser and inkjet printer output onto 80 gsm office paper resulted in a loss of diagnostic information. Wherever possible, radiographs should be transmitted digitally between clinicians to maintain image integrity. CLINICAL RELEVANCE: This paper illustrates the potential pitfalls of printing radiographs to be sent with referrals.

The influence of 'Tall Man' lettering on errors of visual perception in the recognition of written drug names.

Visual errors in the perception of written drug names can reflect orthographic similarity amongst certain names. Drug names are typically printed in lowercase text. 'Tall Man' lettering, the capitalisation of the portions that differ amongst orthographically similar drug names, is employed in the field of medication labelling and prescribing to reduce medication errors by highlighting the area most likely to prevent confusion. The influence of textual format on visual drug name perception was tested amongst healthcare professionals (n = 133) using the Reicher-Wheeler task. Relative to lowercase text, Tall Man lettering improved accuracy in drug name perception. However, an equivalent improvement in accuracy was obtained using entirely uppercase text. Thus, character size may be a key determinant of perceptual accuracy for Tall Man lettering. Specific considerations for the manner in which Tall Man lettering might be best formatted and implemented in practice to reduce medication errors are discussed. STATEMENT OF RELEVANCE: Tall Man lettering aims to prevent medication errors by reducing visual confusions amongst orthographically similar drug names. It was found that, compared to lowercase text, Tall Man lettering improved accuracy in drug name perception. Character size appeared to be a key determinant of perceptual accuracy for Tall Man lettering.

Formation and stability of lines produced by inkjet printing.

To produce stable lines with parallel sides through inkjet printing, individual drops are deposited on a surface so that they coalesce; this initial liquid line (or bead) must remain stable until it forms a solid. The stable line width is shown to be bounded by two limits, with the lower bound (minimum line width) determined by the maximum drop spacing for stable coalescence and the upper bound determined by the minimum drop spacing below which a bulging instability occurs. The maximum stable track width is also a function of the velocity at which an inkjet printhead traverses the substrate. These bounds are presented in dimensionless form and are shown to agree well with experiment. To enable easier determination of the stability of an arbitrary ink/substrate combination, both the upper and lower bounds are presented in graphical forms to define a region of bead stability in an appropriate parameter space.

Colorimetric analysis of three editions of the Velhagen-Broschmann pseudoisochromatic colour plates.

PURPOSE: Chromatic variations across different copies and different editions of pseudoisochromatic tests and violation of underlying principles of construction for individual plates can influence test results. METHODS: We analysed the colorimetric characteristics of three different editions of Velhagen-Broschmann pseudoisochromatic plates (30th edition printed in 1995, 31st edition printed in 1997, 32nd edition printed in 2000). One hundred and twelve coloured dots of 18 plates were chosen from each edition. We measured RGB and CIE XYZ values using a spectrophotometer. Differences in lightness and chromaticity between corresponding dots of different editions were analysed in terms of Delta L* and Delta u'v', respectively. For each plate deviations from dichromatic confusion lines were analysed. Furthermore, we determined the relative luminance of a target compared to its background in terms of the Weber contrast. RESULTS: The mean Delta L* across editions was 2.05 (+/-1.4) and the mean Delta u'v' was 0.0078 (+/-0.0029). For two plates the deviations of targets from dichromatic confusion lines exceeded suggested values. For a number of plates, the lightness contrast between the symbol and its background was high. Comparison with psychophysical data showed that these colour plates are easily detectable by colour-deficient observers. CONCLUSIONS: Lightness and chromatic variation across the three editions was moderate except for a small number of plates perhaps due to inaccuracies in the printing process. The design of several plates should be revised according to standard principles of construction of colour deficiency tests.

Procedimiento para la evaluación, aprobación e impresión de publicaciones y reglamento del Comité Editor del Instituto Nacional de Salud

Presenta los procedimientos para la selección, evaluación, aprobación e impresión de publicaciones del INS

Procedimientos para la evaluación, aprobación e impresión de publicaciones y reglamento del Comité Editor del Instituto Nacional de Salud / Procedures for assessment, approval and printing of publications and regulations of the Editorial Committee of the National Institute of Health

El presente documento describe las normas de distribución de publicaciones con el propósito de ordenar y hacer respetar, en beneficio institucional, la organización, niveles de decisión y procedimientos relacionados con todas las publicaciones del INS y su distribución(AU)

Procedimientos para la evaluación, aprobación e impresión de publicaciones y reglamento del Comité Editor del Instituto Nacional de Salud / Procedures for assessment, approval and printing of publications and regulations of the Editorial Committee of the National Institute of Health

El presente documento describe las normas de distribución de publicaciones con el propósito de ordenar y hacer respetar, en beneficio institucional, la organización, niveles de decisión y procedimientos relacionados con todas las publicaciones del INS y su distribución

Interactive decision support system to predict print quality.

Customers using printers occasionally experience problems such as fuzzy images, bands, or streaks. The customer may call or otherwise contact the manufacturer, who attempts to diagnose the problem based on the customer's description of the problem. This study evaluated Bayesian inference as a tool for identifying or diagnosing 16 different types of print defects from such descriptions. The Bayesian model was trained using 1701 narrative descriptions of print defects obtained from 60 subjects with varying technical backgrounds. The Bayesian model was then implemented as an interactive decision support system, which was used by eight 'agents' to diagnose print defects reported by 16 'customers' in a simulated call centre. The 'agents' and 'customers' in the simulated call centre were all students at Purdue University. Each customer made eight telephone calls, resulting in a total of 128 telephone calls in which the customer reported defects to the agents. The results showed that the Bayesian model closely fitted the data in the training set of narratives. Overall, the model correctly predicted the actual defect category with its top prediction 70% of the time. The actual defect was in the top five predictions 94% of the time. The model in the simulated call centre performed nearly as well for the test subjects. The top prediction was correct 50% of the time, and the defect was one of the top five predictions 80% of the time. Agent accuracy in diagnosing the problem improved when using the tool. These results demonstrated that the Bayesian system learned enough from the existing narratives to accurately classify print defect categories.