Dynamics of the lens basement membrane capsule and its interaction with connective tissue-like extracapsular matrix proteins.

The lens, suspended in the middle of the eye by tendon-like ciliary zonule fibers and facing three different compartments of the eye, is enclosed in what has been described as the thickest basement membrane in the body. While the protein components of the capsule have been a subject of study for many years, the dynamics of capsule formation, and the region-specific relationship of its basement membrane components to one another as well as to other matrix molecules remains to be explored. Through high resolution confocal and super-resolution imaging of the lens capsule and 3D surface renderings of acquired z-stacks, our studies revealed that each of its basement membrane proteins, laminin, collagen IV, nidogen and perlecan, has unique structure, organization, and distribution specific both to the region of the lens that the capsule is located in and the position of the capsule within the eye. We provide evidence of basal membrane gradients across the depth of the capsule as well as the synthesis of distinct basement membrane lamella within the capsule. These distinctions are most prominent in the equatorial capsule zone where collagen IV and nidogen span the capsule depth, while laminin and perlecan are located in two separate lamellae located at the innermost and outermost capsule domains. We discovered that an extracapsular matrix compartment rich in the connective tissue-like matrix molecules fibronectin, tenascin-C, and fibrillin is integrated with the superficial surface of the lens capsule. Each matrix protein in this extracapsular zone also exhibits region-specific distribution with fibrils of fibrillin, the matrix protein that forms the backbone of the ciliary zonules, inserting within the laminin/perlecan lamella at the surface of the equatorial lens capsule.

Characterization of three-dimensional cancer cell migration in mixed collagen-Matrigel scaffolds using microfluidics and image analysis.

Microfluidic devices are becoming mainstream tools to recapitulate in vitro the behavior of cells and tissues. In this study, we use microfluidic devices filled with hydrogels of mixed collagen-Matrigel composition to study the migration of lung cancer cells under different cancer invasion microenvironments. We present the design of the microfluidic device, characterize the hydrogels morphologically and mechanically and use quantitative image analysis to measure the migration of H1299 lung adenocarcinoma cancer cells in different experimental conditions. Our results show the plasticity of lung cancer cell migration, which turns from mesenchymal in collagen only matrices, to lobopodial in collagen-Matrigel matrices that approximate the interface between a disrupted basement membrane and the underlying connective tissue. Our quantification of migration speed confirms a biphasic role of Matrigel. At low concentration, Matrigel facilitates migration, most probably by providing a supportive and growth factor retaining environment. At high concentration, Matrigel slows down migration, possibly due excessive attachment. Finally, we show that antibody-based integrin blockade promotes a change in migration phenotype from mesenchymal or lobopodial to amoeboid and analyze the effect of this change in migration dynamics, in regards to the structure of the matrix. In summary, we describe and characterize a robust microfluidic platform and a set of software tools that can be used to study lung cancer cell migration under different microenvironments and experimental conditions. This platform could be used in future studies, thus benefitting from the advantages introduced by microfluidic devices: precise control of the environment, excellent optical properties, parallelization for high throughput studies and efficient use of therapeutic drugs.

The influence of extracellular matrix composition on the differentiation of neuronal subtypes in tissue engineered innervated intestinal smooth muscle sheets.

Differentiation of enteric neural stem cells into several appropriate neural phenotypes is crucial while considering transplantation as a cellular therapy to treat enteric neuropathies. We describe the formation of tissue engineered innervated sheets, where intestinal smooth muscle and enteric neuronal progenitor cells are brought into close association in extracellular matrix (ECM) based microenvironments. Uniaxial alignment of constituent smooth muscle cells was achieved by substrate microtopography. The smooth muscle component of the tissue engineered sheets maintained a contractile phenotype irrespective of the ECM composition, and generated equivalent contractions in response to potassium chloride stimulation, similar to native intestinal tissue. We provided enteric neuronal progenitor cells with permissive ECM-based compositional and viscoelastic cues to generate excitatory and inhibitory neuronal subtypes. In the presence of the smooth muscle cells, the enteric neuronal progenitor cells differentiated to functionally innervate the smooth muscle. The differentiation of specific neuronal subtypes was influenced by the ECM microenvironment, namely combinations of collagen I, collagen IV, laminin and/or heparan sulfate. The physiology of differentiated neurons within tissue engineered sheets was evaluated. Sheets with composite collagen and laminin had the most similar patterns of Acetylcholine-induced contraction to native intestinal tissue, corresponding to an increased protein expression of choline acetyltransferase. An enriched nitrergic neuronal population, evidenced by an increased expression of neuronal nitric oxide synthase, was obtained in tissue engineered sheets that included collagen IV. These sheets had a significantly increased magnitude of electrical field stimulated relaxation, sensitive maximally to nitric oxide synthase inhibition. Tissue engineered sheets containing laminin and/or heparan sulfate had a balanced expression of contractile and relaxant motor neurons. Our studies demonstrated that neuronal subtype was modulated by varying ECM composition. This observation could be utilized to derive enriched populations of specific enteric neurons in vitro prior to transplantation.

Basic components of connective tissues and extracellular matrix: elastin, fibrillin, fibulins, fibrinogen, fibronectin, laminin, tenascins and thrombospondins.

Collagens are the most abundant components of the extracellular matrix and many types of soft tissues. Elastin is another major component of certain soft tissues, such as arterial walls and ligaments. Many other molecules, though lower in quantity, function as essential components of the extracellular matrix in soft tissues. Some of these are reviewed in this chapter. Besides their basic structure, biochemistry and physiology, their roles in disorders of soft tissues are discussed only briefly as most chapters in this volume deal with relevant individual compounds. Fibronectin with its muldomain structure plays a role of "master organizer" in matrix assembly as it forms a bridge between cell surface receptors, e.g., integrins, and compounds such collagen, proteoglycans and other focal adhesion molecules. It also plays an essential role in the assembly of fibrillin-1 into a structured network. Laminins contribute to the structure of the extracellular matrix (ECM) and modulate cellular functions such as adhesion, differentiation, migration, stability of phenotype, and resistance towards apoptosis. Though the primary role of fibrinogen is in clot formation, after conversion to fibrin by thrombin, it also binds to a variety of compounds, particularly to various growth factors, and as such fibrinogen is a player in cardiovascular and extracellular matrix physiology. Elastin, an insoluble polymer of the monomeric soluble precursor tropoelastin, is the main component of elastic fibers in matrix tissue where it provides elastic recoil and resilience to a variety of connective tissues, e.g., aorta and ligaments. Elastic fibers regulate activity of TGFßs through their association with fibrillin microfibrils. Elastin also plays a role in cell adhesion, cell migration, and has the ability to participate in cell signaling. Mutations in the elastin gene lead to cutis laxa. Fibrillins represent the predominant core of the microfibrils in elastic as well as non-elastic extracellular matrixes, and interact closely with tropoelastin and integrins. Not only do microfibrils provide structural integrity of specific organ systems, but they also provide a scaffold for elastogenesis in elastic tissues. Fibrillin is important for the assembly of elastin into elastic fibers. Mutations in the fibrillin-1 gene are closely associated with Marfan syndrome. Fibulins are tightly connected with basement membranes, elastic fibers and other components of extracellular matrix and participate in formation of elastic fibers. Tenascins are ECM polymorphic glycoproteins found in many connective tissues in the body. Their expression is regulated by mechanical stress both during development and in adulthood. Tenascins mediate both inflammatory and fibrotic processes to enable effective tissue repair and play roles in pathogenesis of Ehlers-Danlos, heart disease, and regeneration and recovery of musculo-tendinous tissue. One of the roles of thrombospondin 1 is activation of TGFß. Increased expression of thrombospondin and TGFß activity was observed in fibrotic skin disorders such as keloids and scleroderma. Cartilage oligomeric matrix protein (COMP) or thrombospondin-5 is primarily present in the cartilage. High levels of COMP are present in fibrotic scars and systemic sclerosis of the skin, and in tendon, especially with physical activity, loading and post-injury. It plays a role in vascular wall remodeling and has been found in atherosclerotic plaques as well.

Nanoscale protein architecture of the kidney glomerular basement membrane.

In multicellular organisms, proteins of the extracellular matrix (ECM) play structural and functional roles in essentially all organs, so understanding ECM protein organization in health and disease remains an important goal. Here, we used sub-diffraction resolution stochastic optical reconstruction microscopy (STORM) to resolve the in situ molecular organization of proteins within the kidney glomerular basement membrane (GBM), an essential mediator of glomerular ultrafiltration. Using multichannel STORM and STORM-electron microscopy correlation, we constructed a molecular reference frame that revealed a laminar organization of ECM proteins within the GBM. Separate analyses of domains near the N- and C-termini of agrin, laminin, and collagen IV in mouse and human GBM revealed a highly oriented macromolecular organization. Our analysis also revealed disruptions in this GBM architecture in a mouse model of Alport syndrome. These results provide the first nanoscopic glimpse into the organization of a complex ECM. DOI:http://dx.doi.org/10.7554/eLife.01149.001.

Vimentin and laminin are altered on cheek pouch microvessels of streptozotocin-induced diabetic hamsters.

OBJECTIVE: Normal endothelial cells respond to shear stress by elongating and aligning in the direction of fluid flow. Hyperglycemia impairs this response and contributes to microvascular complications, which result in deleterious effects to the endothelium. This work aimed to evaluate cheek pouch microvessel morphological characteristics, reactivity, permeability, and expression of cytoskeleton and extracellular matrix components in hamsters after the induction of diabetes with streptozotocin. METHODS: Syrian golden hamsters (90-130 g) were injected with streptozotocin (50 mg/kg, i.p.) or vehicle either 6 (the diabetes mellitus 6 group) or 15 (the diabetes mellitus 15 group) days before the experiment. Vascular dimensions and density per area of vessels were determined by morphometric and stereological measurements. Changes in blood flow were measured in response to acetylcholine, and plasma extravasation was measured by the number of leakage sites. Actin, talin, α-smooth muscle actin, vimentin, type IV collagen, and laminin were detected by immunohistochemistry and assessed through a semiquantitative scoring system. RESULTS: There were no major alterations in the lumen, wall diameters, or densities of the examined vessels. Likewise, vascular reactivity and permeability were not altered by diabetes. The arterioles demonstrated increased immunoreactivity to vimentin and laminin in the diabetes mellitus 6 and diabetes mellitus 15 groups. DISCUSSION: Antibodies against laminin and vimentin inhibit branching morphogenesis in vitro. Therefore, laminin and vimentin participating in the structure of the focal adhesion may play a role in angiogenesis. CONCLUSIONS: Our results indicated the existence of changes related to cell-matrix interactions, which may contribute to the pathological remodeling that was already underway one week after induction of experimental diabetes.

Transwell(®) invasion assays.

The need to identify inhibitors of cancer invasion has driven the development of quantitative in vitro invasion assays. The most common assays used are based on the original Boyden assay system. Today commercially available plastic inserts for multi-well plates, which possess a cell-permeable membrane, as typified by Transwell(®) Permeable Supports, permit accurate repeatable invasion assays. When placed in the well of a multi-well tissue culture plate these inserts create a two-chamber system separated by the cell-permeable membrane. To create an invasion assay the pores in the membrane are blocked with a gel composed of extracellular matrix that is meant to mimic the typical matrices that tumour cells encounter during the invasion process in vivo. By placing the cells on one side of the gel and a chemoattractant on the other side of the gel, invasion is determined by counting those cells that have traversed the cell-permeable membrane having invaded towards the higher concentration of chemoattractant. In this chapter, in addition to protocols for performing Transwell invasion assays, there is consideration of the limitations of current assay designs with regard to available matrices and the absence of tumour microenvironment cells.

Different collagen types define two types of idiopathic epiretinal membranes.

AIMS: To identify differences in extracellular matrix contents between idiopathic epiretinal membranes (IEM) of cellophane macular reflex (CMRM) or preretinal macular fibrosis (PMFM) type. METHODS AND RESULTS: Idiopathic epiretinal membranes were analysed by light and quantitative transmission electron microscopy, immunohistochemistry and Western blotting. Substantial differences between CMRM and PMFM were observed regarding the nature of extracellular fibrils. In CMRM the fibrils were thin, with diameters between 6 and 15 nm. Between the fibrils, aggregates of long-spacing collagen were observed. In PMFM the diameters of fibrils measured either 18-26 or 36-56 nm. Using immunogold electron microscopy, 6-15 nm fibrils in CMRM were labelled for collagen type VI, while the fibrils in PMFM remained unstained. Using Western blotting and immunohistochemistry, a strong signal for collagen type VI was observed in all CMRM, while immunoreactivity was weak or absent in PMFM. In contrast, PMFM showed immunoreactivity for collagen types I and II, which was weak or absent in CMRM. Both types of membranes showed immunoreactivity for collagen types III and IV, laminin and fibronectin with similar intensity. CONCLUSION: The presence of high amounts of collagen type VI in CMRM and the relative absence of collagen types I and II is the major structural difference to PMFM.

Vimentin and laminin are altered on cheek pouch microvessels of streptozotocin-induced diabetic hamsters

OBJECTIVE: Normal endothelial cells respond to shear stress by elongating and aligning in the direction of fluid flow. Hyperglycemia impairs this response and contributes to microvascular complications, which result in deleterious effects to the endothelium. This work aimed to evaluate cheek pouch microvessel morphological characteristics, reactivity, permeability, and expression of cytoskeleton and extracellular matrix components in hamsters after the induction of diabetes with streptozotocin. METHODS: Syrian golden hamsters (90-130 g) were injected with streptozotocin (50 mg/kg, i.p.) or vehicle either 6 (the diabetes mellitus 6 group) or 15 (the diabetes mellitus 15 group) days before the experiment. Vascular dimensions and density per area of vessels were determined by morphometric and stereological measurements. Changes in blood flow were measured in response to acetylcholine, and plasma extravasation was measured by the number of leakage sites. Actin, talin, α-smooth muscle actin, vimentin, type IV collagen, and laminin were detected by immunohistochemistry and assessed through a semiquantitative scoring system. RESULTS: There were no major alterations in the lumen, wall diameters, or densities of the examined vessels. Likewise, vascular reactivity and permeability were not altered by diabetes. The arterioles demonstrated increased immunoreactivity to vimentin and laminin in the diabetes mellitus 6 and diabetes mellitus 15 groups. DISCUSSION: Antibodies against laminin and vimentin inhibit branching morphogenesis in vitro. Therefore, laminin and vimentin participating in the structure of the focal adhesion may play a role in angiogenesis. CONCLUSIONS: Our results indicated the existence of changes related to cell-matrix interactions, which may contribute to the pathological remodeling that was already underway one week after induction of experimental diabetes.

Nano-structure of the laminin γ-1 short arm reveals an extended and curved multidomain assembly.

Laminins are multidomain glycoproteins that play important roles in development and maintenance of the extracellular matrix via their numerous interactions with other proteins. Several receptors for the laminin short arms revealed their importance in network formation and intercellular signaling. However, both the detailed structure of the laminin γ-1 short arm and its organization within the complexes is poorly understood due to the complexity of the molecule and the lack of a high-resolution structure. The presented data provide the first subatomic resolution structure for the laminin γ-1 short arm in solution. This was achieved using an integrated approach that combined a number of complementary biophysical techniques such as small angle X-ray scattering (SAXS), analytical ultracentrifugation, dynamic light scattering and electron microscopy. As a result of this study, we have obtained a significantly improved model for the laminin γ-1 short arm that represents a major step forward in molecular understanding of laminin-mediated complex formations.

Laminin is required for Schwann cell morphogenesis.

Development of the peripheral nervous system requires radial axonal sorting by Schwann cells (SCs). To accomplish sorting, SCs must both proliferate and undergo morphogenetic changes such as process extension. Signaling studies reveal pathways that control either proliferation or morphogenesis, and laminin is essential for SC proliferation. However, it is not clear whether laminin is also required for SC morphogenesis. By using a novel time-lapse live-cell-imaging technique, we demonstrated that laminins are required for SCs to form a bipolar shape as well as for process extension. These morphological deficits are accompanied by alterations in signaling pathways. Phosphorylation of Schwannomin at serine 518 and activation of Rho GTPase Cdc42 and Rac1 were all significantly decreased in SCs lacking laminins. Inhibiting Rac1 and/or Cdc42 activities in cultured SCs attenuated laminin-induced myelination, whereas forced activation of Rac1 and/or Cdc42 in vivo improved sorting and hypomyelinating phenotypes in SCs lacking laminins. These findings indicate that laminins play a pivotal role in regulating SC cytoskeletal signaling. Coupled with previous results demonstrating that laminin is critical for SC proliferation, this work identifies laminin signaling as a central regulator coordinating the processes of proliferation and morphogenesis in radial axonal sorting.

Vitamin A deficiency injures liver parenchyma and alters the expression of hepatic extracellular matrix.

Vitamin A is an essential lipid-soluble nutrient that is crucial for morphogenesis and adult tissue maintenance. The retinoid homeostasis in the liver depends on a regular supply of vitamin A from an adequate dietary intake to preserve the normal organ structure and functions. This study focuses on the effect of vitamin A deficiency on the morphology and extracellular proteins expression of the liver in adult Wistar rats. Animals were fed with a normal (control group) or deficient vitamin A diet for 3 months. At the end of the experimental period, histological examination of the livers under light and electron microscopy revealed that vitamin A deficiency produced a loss of hepatocyte cord disposition with an irregular parenchymal organization. Abundant fat droplets were present in the cytoplasm of the hepatocytes. Elongated myofibroblastic-like cells with an irregular cytoplasmic process and without lipid droplets could be seen at the perisinusoidal space, where an elevated intensity of alpha smooth muscle actin (alpha-SMA) was observed. These results suggest that an activation of hepatic stellate cells (HSCs) occurred. Moreover, immunochemical methods revealed that vitamin A deficiency led to an increased expression of hepatic fibronectin, laminin and collagen type IV. We propose that vitamin A deprivation caused liver injury and that HSCs underwent a process of activation in which they produced alpha-SMA and synthesized extracellular components. These changes may be a factor predisposing to liver fibrosis. In consequence, vitamin A deprivation could affect human and animal health.

Laminin nanofiber meshes that mimic morphological properties and bioactivity of basement membranes.

The basement membrane protein, laminin I, has been used broadly as a planar two-dimensional film or in a three-dimensional form as a reconstituted basement membrane gel such as Matrigel to support cellular attachment, growth, and differentiation in vitro. In basement membranes in vivo, laminin exhibits a fibrillar morphology, highlighting the electrospinning process as an ideal method to recreate such fibrous substrates in vitro. Electrospinning was employed to fabricate meshes of murine laminin I nanofibers (LNFs) with fiber size, geometry, and porosity of authentic basement membranes. Purified laminin I was solubilized and electrospun in parametric studies of fiber diameters as a function of polymer solution concentration, collecting distance, and flow rate. Resulting fiber diameters ranged from 90 to 300 nm with mesh morphologies containing beads. Unlike previously described nanofibers (NFs) synthesized from proteins such as collagen, meshes of LNFs retain their structural features when wetted and do not require fixation by chemical crosslinking, which often destroys cell attachment and other biological activity. The LNF meshes maintained their geometry for at least 2 days in culture without chemical crosslinking. PC12 cells extended neurites without nerve growth factor stimulation on LNF substrates. Additionally, LNFs significantly enhance both the rate and quantity of attachment of human adipose stem cells (ASCs) compared to laminin films. ASCs were viable and maintained attachment to LNF meshes in serum-free media for at least 3 days in culture and extended neurite-like processes after 24 h in serum-free media conditions without media additives to induce differentiation. LNF meshes are a novel substrate for cell studies in vitro, whose properties may be an excellent scaffold material for delivering cells in tissue engineering applications in vivo.

The extracellular matrix of hydra is a porous sheet and contains type IV collagen.

Hydra, as an early diploblastic metazoan, has a well-defined extracellular matrix (ECM) called mesoglea. It is organized in a tri-laminar pattern with one centrally located interstitial matrix that contains type I collagen and two sub-epithelial zones that resemble a basal lamina containing laminin and possibly type IV collagen. This study used monoclonal antibodies to the three hydra mesoglea components (type I, type IV collagens and laminin) and immunofluorescent staining to visualize hydra mesoglea structure and the relationship between these mesoglea components. In addition, hydra mesoglea was isolated free of cells and studied with immunofluorescence and scanning electron microscopy (SEM). Our results show that type IV collagen co-localizes with laminin in the basal lamina whereas type I collagen forms a grid pattern of fibers in the interstitial matrix. The isolated mesoglea can maintain its structural stability without epithelial cell attachment. Hydra mesoglea is porous with multiple trans-mesoglea pores ranging from 0.5 to 1 microm in diameter and about six pores per 100 microm(2) in density. We think these trans-mesoglea pores provide a structural base for epithelial cells on both sides to form multiple trans-mesoglea cell-cell contacts. Based on these findings, we propose a new model of hydra mesoglea structure.

Substrate chemistry-dependent conformations of single laminin molecules on polymer surfaces are revealed by the phase signal of atomic force microscopy.

The conformation of single laminin molecules adsorbed on synthetic substrates is directly observed making use of the phase magnitude in tapping mode atomic force microscopy (AFM). With AFM, it is not possible to differentiate the proteins on the substrate if use is made of the height signal, since the roughness of the material becomes of the same order of magnitude as the adsorbed protein, typically 10 nm height. This work shows how AFM can be exploited to reveal protein conformation on polymer materials. Different laminin morphologies are observed on a series of different copolymers based on ethyl acrylate and hydroxyethyl acrylate as a function of the surface density of -OH groups: from globular to completely extended morphologies of the protein molecules are obtained, and the onset of laminin network formation on some substrates can be clearly identified. The results stress the importance of the underlying synthetic substrate's surface chemistry for the biofunctional conformation of adsorbed proteins.

Cell adhesion and mechanical properties of a flexible scaffold for cardiac tissue engineering.

Cardiac tissue engineering is focused on obtaining functional cardiomyocyte constructs to provide an alternative to cellular cardiomyoplasty. Mechanical stimuli have been shown to stimulate protein expression and the differentiation of mammalian cells from contractile tissues. Our aim was to obtain a flexible scaffold which could be used to apply mechanical forces during tissue regeneration. Poly(1,8-octanediol-co-citric acid) (POC) is an elastomer that can be processed into scaffolds for tissue engineering. We investigated the effect of modifying the porosity on the mechanical properties of the POC scaffolds. In addition, the effects of the storage method and strain rate on material integrity were assessed. The maximum elongation of POC porous films varied from 60% to 160% of their original length. A decrease in the porosity caused a rise in this elastic modulus. The attachment of HL-1 cardiomyocytes to POC was assessed on films coated with fibronectin, collagen and laminin. These extracellular matrix proteins promoted cell adhesion in a protein-type- and concentration-dependent manner. Therefore, POC scaffolds can be optimised to meet the mechanical and biological parameters needed for cardiac culture. This porous material has the potential to be used for cardiac tissue engineering as well as for other soft tissue applications.

Intermolecular forces and enthalpies in the adhesion of Streptococcus mutans and an antigen I/II-deficient mutant to laminin films.

The antigen I/II family of surface proteins is expressed by most oral streptococci, including Streptococcus mutans, and mediates specific adhesion to, among other things, salivary films and extracellular matrix proteins. In this study we showed that antigen I/II-deficient S. mutans isogenic mutant IB03987 was nearly unable to adhere to laminin films under flow conditions due to a lack of specific interactions (0.8 x 10(6) and 1.1 x 10(6) cells cm(-2) at pH 5.8 and 6.8, respectively) compared with parent strain LT11 (21.8 x 10(6) and 26.1 x 10(6) cells cm(-2)). The adhesion of both the parent and mutant strains was slightly greater at pH 6.8 than at pH 5.8. In addition, atomic force microscopy (AFM) experiments demonstrated that the parent strain experienced less repulsion when it approached a laminin film than the mutant experienced. Upon retraction, combined specific and nonspecific adhesion forces were stronger for the parent strain (up to -5.0 and -4.9 nN at pH 5.8 and 6.8, respectively) than for the mutant (up to -1.5 and -2.1 nN), which was able to interact only through nonspecific interactions. Enthalpy was released upon adsorption of laminin to the surface of the parent strain but not upon adsorption of laminin to the surface of IB03987. A comparison of the adhesion forces in AFM with the adhesion forces reported for specific ligand-receptor complexes resulted in the conclusion that the number of antigen I/II binding sites for laminin on S. mutans LT11 is on the order of 6 x 10(4) sites per organism and that the sites are probably arranged along exterior surface structures, as visualized here by immunoelectron microscopy.

Effects of fibronectin and laminin on structural, mechanical and transport properties of 3D collageneous network.

Recent studies, on cells cultured in 3D collagen gels, have shown that, beside from their well known biochemical role, fibronectin (FN) and laminin (LM) affect cell functions via a modification of mechanical and structural properties of matrix due to interaction with collagen molecules. Though biochemical properties of FN and LM have been widely studied, little is known about their role in collagen matrix assembly. The aim of this work was to characterize FN- and LM-based collagen semi-interpenetrating polymer networks (semi-IPNs), in order to understand how these biomacromolecular species can affect collagen network assembly and properties. Morphology, viscoelasticity and diffusivity of collagen gels and FN- and LM-based collagen semi-IPNs were analysed by Confocal Laser Scanning microscopy (CLSM), Environmental Scanning Electron microscopy (ESEM), Transmission Electron microscopy (TEM), Rheometry and Fluorescence Recovery After Photobleaching (FRAP) techniques. It was found that FN and LM were organized in aggregates, interspersed in collagen gel, and in thin fibrils, distributed along collagen fibres. In addition, high FN and LM concentrations affected collagen fibre assembly and structure and induced drastic effects on rheological and transport properties.

Large area protein nanopatterning for biological applications.

Large area nanopatterns of functional proteins are demonstrated. A new approach to analyze atomic force microscopy height histograms is used to quantify protein and antibody binding to nanoscale patches. Arrays of nanopatches, each containing less than 40 laminin molecules, are shown to be highly functional binding close to 1 monoclonal anti-laminin IgG (site by IKVAV sequence) or 3-4 polyclonal anti-laminin IgG's per surface bound laminin. Complementary quartz crystal microbalance measurements indicate higher functionality at nanopatches than on homogeneous surfaces.

Engineering three-dimensional pulmonary tissue constructs.

In this paper, we report on engineering 3-D pulmonary tissue constructs in vitro. Primary isolates of murine embryonic day 18 fetal pulmonary cells (FPC) were comprised of a mixed population of epithelial, mesenchymal, and endothelial cells as assessed by immunohistochemistry and RT-PCR of 2-D cultures. The alveolar type II (AE2) cell phenotype in 2-D and 3-D cultures was confirmed by detection of SpC gene expression and presence of the gene product prosurfactant protein C. Three-dimensional constructs of FPC were generated utilizing Matrigel hydrogel and synthetic polymer scaffolds of poly-lactic-co-glycolic acid (PLGA) and poly-L-lactic-acid (PLLA) fabricated into porous foams and nanofibrous matrices, respectively. Three-dimensional Matrigel constructs contained alveolar forming units (AFU) comprised of cells displaying AE2 cellular ultrastructure while expressing the SpC gene and gene product. The addition of tissue-specific growth factors induced formation of branching, sacculated epithelial structures reminiscent of the distal lung architecture. Importantly, 3-D culture was necessary for inducing expression of the morphogenesis-associated distal epithelial gene fibroblast growth factor receptor 2 (FGFr2). PLGA foams and PLLA nanofiber scaffolds facilitated ingrowth of FPC, as evidenced by histology. However, these matrices did not support the survival of distal lung epithelial cells, despite the presence of tissue-specific growth factors. Our results may provide the first step on the long road toward engineering distal pulmonary tissue for augmenting and/or replacing dysfunctional native lung in diseases, such as neonatal pulmonary hypoplasia.