Quantitative evaluation of vertical control in orthodontic camouflage treatment for skeletal class II with hyperdivergent facial type.

BACKGROUND: In this study, we sought to quantify the influence of vertical control assisted by a temporary anchorage device (TAD) on orthodontic treatment efficacy for skeletal class II patients with a hyperdivergent facial type and probe into the critical factors of profile improvement. METHODS: A total of 36 adult patients with skeletal class II and a hyperdivergent facial type were included in this retrospective case-control study. To exclude the effect of sagittal anchorage reinforcement, the patients were divided into two groups: a maxillary maximum anchorage (MMA) group (N = 17), in which TADs were only used to help with anterior tooth retraction, and the MMA with vertical control (MMA + VC) group (N = 19), for which TADs were also used to intrude the maxillary molars and incisors. The treatment outcome was evaluated using dental, skeletal, and soft-tissue-related parameters via a cephalometric analysis and cast superimposition. RESULTS: A significant decrease in ANB (P < 0.05 for both groups), the retraction and uprighting of the maxillary and mandibular incisors, and the retraction of protruded upper and lower lips were observed in both groups. Moreover, a significant intrusion of the maxillary molars was observed via the cephalometric analysis (- 1.56 ± 1.52 mm, P < 0.05) and cast superimposition (- 2.25 ± 1.03 mm, P < 0.05) of the MMA + VC group but not the MMA group, which resulted in a remarkable decrease in the mandibular plane angle (- 1.82 ± 1.38°, P < 0.05). The Z angle (15.25 ± 5.30°, P < 0.05) and Chin thickness (- 0.97 ± 0.45°, P < 0.05) also improved dramatically in the MMA + VC group, indicating a better profile and a relaxed mentalis. Multivariate regression showed that the improvement in the soft tissue was closely related to the counterclockwise rotation of the mandible plane (P < 0.05). CONCLUSIONS: TAD-assisted vertical control can achieve intrusion of approximately 2 mm for the upper first molars and induce mandibular counterclockwise rotation of approximately 1.8°. Moreover, it is especially important for patients without sufficient retraction of the upper incisors or a satisfactory chin shape.

Relationship between bite force, occlusal contact area, and three-dimensional facial soft tissue in dentofacial deformities.

PURPOSE: This study aimed to investigate three-dimensional facial soft tissue dimensions, maximum bite force (MBF), and occlusal contact area in patients with DFD. In addition, we analyzed the relationship between MBF and the three-dimensional facial measurements. METHODS: Thirty-two patients with skeletal Class III DFD and 20 patients with Class II DFD underwent a soft tissue evaluation using surface laser scanning, as well as MBF and occlusal contact area assessments. The DFD groups were compared with each other and with 25 healthy subjects. RESULTS: Significant morphological differences were found in the transversal, vertical, and anteroposterior dimensions between Class II DFD and Class III DFD. Both DFD groups presented an increased linear distance of chin height, which was strongly related with decreased MBF magnitude. The DFD groups exhibited lower MBF and occlusal contact area, with no significant differences between Class II and Class III DFD. CONCLUSION: The presence of DFD affected 3D measurements of facial soft tissue, causing variations beyond normal limits, lower MBF, and occlusal contact area in both Class II and Class III DFD patients. The vertical dimension might have influenced the lower MBF magnitude in the studied skeletal deformities.

A 10-year-old boy with class II oligodontia treated with buccal fixed appliances and agenesis space closure of the four second premolars: Case report No. 230075 - Titularisation Collège Européen Orthodontie (CEO), European College of Orthodontics.

The patient presented in this case report is a 10-year-old boy with hyperdivergent skeletal Class II associated with familial genetic agenesis of the second premolars. The treatment plan chosen was to close the spaces of agenesis using a bimaxillary appliance fixed buccally. The advantages and disadvantages of this treatment option were discussed. The result was stable and made it possible to avoid an implant-prosthetic solution, which would undoubtedly have been more restrictive over time.

Long-term skeletodental changes with early and late treatment using modified C-palatal plates in hyperdivergent Class II adolescents.

OBJECTIVES: To compare skeletodental changes between early and late treatment groups using modified C-palatal plates (MCPP) and long-term retention outcomes in hyperdivergent Class II adolescents. MATERIALS AND METHODS: Seventy-one hyperdivergent Class II patients were divided into four groups according to treatment modality and treatment timing: group 1, early treatment with MCPP (n = 16; 9.9 ± 0.9 years); group 2, late treatment with MCPP (n = 19; 12.3 ± 0.8 years); group 3, early treatment with headgear (HG; n = 18; 9.6 ± 0.8 years); and group 4, late treatment with HG (n = 18; 12.1 ± 1.2 years). Lateral cephalograms were taken and skeletal and dental variables were measured. For statistical analysis, paired t-tests, independent t-tests, and multiple regression were performed. RESULTS: The early MCPP group showed a more significant decrease in mandibular plane angle than the late MCPP group did, and vertical control was more efficient in the early group than in the late group. In the MCPP groups, both FMA and SN-GoGn were increased with late treatment but decreased with early treatment, and the difference was statistically significant (P < .01). The early-treatment MCPP group had a significant decrease in SN-GoGn of 0.6° compared with an increase of 1.7° in the early treatment HG group (P < .01). Posttreatment stability of both the early and late MCPP groups was maintained in long-term retention. CONCLUSIONS: Early MCPP showed more significant vertical control than late MCPP. However, there was no difference in long-term stability between early and late groups.

Is significant mandibular advancement possible after the peak of puberty? Dento-osseous palatal expansion and the STM4 technique (Skeletal Therapy Manni Telescopic Herbst 4 miniscrews): A case report.

INTRODUCTION: Treatment of skeletal class II growing patients often requires the use of functional appliances, aimed at promoting mandibular advancement. Among these, Herbst appliance is recommended for its effectiveness, efficiency, and reduced need for compliance. Despite its skeletal favourable effects, well-known dental compensations can occur, especially when the appliance is not used close to the pubertal peak: upper incisors retroclination, lower incisors proclination, upper molars distalization and lower molars mesialization could reduce the overjet needed for a proper mandibular advancement. To counteract these unfavourable effects skeletal anchorage could be crucial. AIM: The aim of this case report is to describe and evaluate the effects of using a skeletally anchored Herbst appliance in an 18-year-old (CVM5) male patient with skeletal Class II malocclusion and a convex profile. TREATMENT PROTOCOL: The treatment started with a tooth-bone-borne palatal expansion, then the upper arch was bonded with pre-adjusted ceramic brackets. After 2months, a Manni Telescopic Herbst (MTH) supported by 4 miniscrews (two in the maxilla and two in the mandible) was applied. To avoid anchorage loss, TADs were connected with elastic chains to the arches. Nine months later, the Herbst was removed, the lower teeth were bonded and the patient wore class 2 elastics to stabilise the occlusion. RESULTS AND CONCLUSIONS: After 24months the treatment goal was achieved with a considerable improvement of the profile and a clinically significant mandibular advancement (Pogonion moved forward 7mm). A one-year follow-up lateral X-rays showed a good stability of the result.

Evaluation of the effect of extraction in comparison to distalization on the maxillary third molars in class II malocclusion: a retrospective study.

OBJECTIVE: To compare the effects of first premolar extraction versus distalization on the vertical position and mesiodistal angulation of maxillary third molars (MxM3) in adolescent class II patients. METHODS: The panoramic x-rays (OPGs) of 200 adolescent class II patients with developing MxM3s were screened. The chosen sample consisted of 2 groups: Group 1 (Distalization) comprising 48 MxM3s, and Group 2 (Extraction) comprising 50 MxM3s. The pre- and post-treatment OPGs were traced to detect the mesiodistal angulation changes of the second molars (MxM2) and MxM3s. RESULTS: The angulation and vertical position of the MxM3s at T0 & T1 were also evaluated using Archer's classification. The distalization group presented a non-significant decrease in the mean angulation of MxM2 and MxM3 (-2.4o & -4.5o uprighting respectively). In the extraction group, both MxM2 and MxM3 presented a highly significant decrease in the mean angulation (-10.5o & -11o uprighting respectively). The angulation and vertical position change of MxM3 significantly improved in the extraction group when compared to the distalization group (P < .001). CONCLUSION: Significant uprighting and occlusal positioning of the maxillary third molars occurred in the premolar extraction treatment group when compared to the distalization treatment group. The results of the current study highlight the importance of recognizing maxillary third molars during orthodontic treatment planning of Class II malocclusion cases.

Biomechanical analysis of total arch maxillary distalization using infrazygomatic crest miniscrews: a finite element analysis study.

AIM: To evaluate the maxillary incisors and canine's immediate movement tendency using three different power arms (PA) height levels during total arch maxillary distalization supported on infrazygomatic crest (IZC) miniscrews according to finite element analysis (FEA). METHODS: Three finite element models of the maxilla were developed based on CBCT imaging of a teenage male patient presenting a Class II Division 1 malocclusion in the early permanent dentition. Maxillary complex, periodontium, orthodontic accessories, IZC miniscrews and an orthodontic wire were digitally created. The PAs were placed between canines and lateral incisors and projected at 4, 7, and 10 mm height distances. After that, distalization forces were simulated between PA and IZC miniscrews. RESULTS: The anterior teeth deformation produced in the FEA models was assessed according to a Von Mises equivalent. The stress was measured, revealing tendencies of initial maxillary teeth movement. No differences were found between the right and left sides. However, there was a significant difference among models in the under-stress areas, especially the apical and cervical root areas of the maxillary anterior teeth. More significant extrusion and lingual tipping of incisors were observed with the 4 mm power arm compared to the 7 mm and 10 mm ones. The 10 mm power arm did not show any tendency for extrusion of maxillary central incisors but a tendency for buccal tipping and intrusion of lateral incisors. CONCLUSION: The maxillary incisors and canines have different immediate movement tendencies according to the height of the anterior point of the en-masse distalization force application. Based on the PA height increase, a change from lingual to buccal tipping and less extrusion tendency was observed for the incisors, while the lingual tipping and extrusion trend for canines increased.

Three-dimensional computed tomography analysis of airway volume in growing class II patients treated with Frankel II appliance.

OBJECTIVE: The purpose of this retrospective study was to assess the airway volume changes associated with the use of Frankel appliance (FR II) in Class II malocclusion patients using three-dimensional cone beam computed tomography (3D CBCT) imaging. MATERIALS AND METHODS: The sample consisted of 31 Class II malocclusion patients (mean age 9.24 ± 1.93 years old, 17 males (54.8%) and 14 females (45.2%)) treated with FR II appliance by the same orthodontist for an average of 9 months ± 20 days. CBCT images were taken before and after treatment and upper airway volume changes were measured using Dolphin 3D software version11.0 (Dolphin Imaging, Chatsworth, CA) and statistically compared. RESULTS: Airway volume of nasal cavity, nasopharynx, oropharynx, hypopharynx and the total airway volume significantly increased after the use of FR II appliance. In addition, significant increase was reported in maxillary base, inter-molar, inter-premolar and inter-canine width. Significant increase in soft tissue thickness was only recorded opposite to CV2. CONCLUSION: The use of the FR II appliance in growing subjects with Class II malocclusion led to a significant increase in the upper airway volume in addition to the anticipated dental and skeletal transverse expansion effects.

Non-compliance treatment in a young adult full-step class II division 2 malocclusion with preadjusted lingual appliance and upper first molars extractions.

This case report describes a complex full-step class II case in a young adult patient treated with lingual straight-wire appliance and upper first molar extraction. As the patient refused a surgical treatment, she was offered the best possible camouflage with the double aim of obtaining an ideal occlusal relationship and maintaining the profile; appropriate biomechanical strategies, including extraction choice and anchorage control during space closure, were needed to achieve the planned results. This case report demonstrates the possibility of successfully resolving severe sagittal discrepancies in an adult patient without surgical treatment by means of a completely invisible non-compliance technique, with the extraction of the most compromised teeth. This report also underlines the need for careful planning during both diagnostic and treatment phases, in order to obtain the best results.

Exploring long-term changes and influencing factors of the upper airway in patients with a skeletal Class II relationship after mandibular advancement with maxillary setback surgery: A comprehensive 2-year follow-up investigation.

INTRODUCTION: The objective of this study was to investigate the 2-year postoperative change and influencing factors of the upper airway after mandibular advancement with maxillary setback surgery for patients with a skeletal Class II relationship. METHODS: Fifty-seven participants who underwent mandibular advancement with maxillary setback surgery were enrolled consecutively. Cone-beam computed tomography was performed preoperatively, 3 months postoperatively (T1), and 2 years (T2) postoperatively. All parameters were measured using Dolphin Imaging software (Dolphin Imaging and Management Solutions, Chatsworth, Calif). RESULTS: The total volume (V), minimum cross-sectional area (CSAmin), and glossopharynx increased significantly in both the short-term (V, 13.33%; CSAmin, 33.03%; glossopharynx, 26.73%) and long-term (V, 10.19%; CSAmin, 23.18%; glossopharynx, 18.27%) after the surgery. Mandibular advancement, mandibular width increase, preoperative CSAmin, and body mass index (BMI) significantly affected 2-year postoperative V increases. Mandibular advancement and BMI significantly affected 2-year postoperative glossopharynx increases. Backward movement of point PNS may lead to a reduction of the nasopharynx; however, downward movement of point PNS, upward movement of point A, and increased maxillary width may compensate for this effect by increasing the likelihood of the nasopharynx opening. Furthermore, mandibular body length at T1 is positively associated with relapse rate ([T2 - T1] / T1) of V and CSAmin. CONCLUSIONS: Mandibular advancement amount, mandibular width increase, preoperative CSAmin, and BMI are the 4 factors for long-term V changes. Patients with a longer mandibular body length might have a lower relapse rate.

Thirteen-year-old female patient with Class II division 1 malocclusion and hypodivergent facial pattern treated with buccal fixed appliance. Case report no 230052. European College of Orthodontics. Commission of affiliation and titularisation.

DATE OF BIRTH: 24/09/1998; sex: female. PRE-TREATMENT DOCUMENTS: 13 years 5 months old; 07/03/2012. DIAGNOSIS: Skeletal Class I with biretrusion, hypodivergent facial pattern; angle's Class II division 1 with overbite; moderate dento-maxillary discrepancy; maxillary incisor malposition. TREATMENT PLANNING: Bimaxillary buccal fixed appliance with Class II elastics. Active treatment duration: 25 months. POST-TREATMENT DOCUMENTS: 15 years 7 months old; 09/05/2014. POST-RETENTION DOCUMENTS: (minimum 1 year) 16 years 9 months old; 08/07/2015. Retention period: unlimited.

Three-dimensional evaluation of mandibular lingula: Comparisons of skeletal angle classifications and growth patterns.

OBJECTIVES: This study aimed to evaluate the position of the mandibular lingula (ML) in adult patients (aged between 18 and 35 years old) with different skeletal and growth patterns using cone-beam computed tomography (CBCT). DESIGN: Cross-sectional. SETTING: Dentistry department of University. SUBJECTS: Subjects comprised CBCT images of 150 adult patients, including 300 rami. METHODS AND MATERIALS: In total, 150 CBCT aged between 18 and 35 were selected and divided into three main groups of 50 samples based on their skeletal relationships (classes I, II and III). Patients were subdivided based on their growth pattern (vertical vs. horizontal), resulting in 25 samples per subgroup. Distances between the mandibular lingula and occlusal plane (ML-OP), sigmoid notch (ML-SN), external oblique ridge (ML-EOR), internal oblique ridge (ML-IOR), posterior border of the ramus (ML-PBR), inferior border of the ramus (ML-IBR), and horizontal and vertical distances to the mandibular foramen (ML-hMF and ML-vMF). One-way ANOVA variance analysis was employed to compare different angle classifications, and Bonferroni analysis was used for multiple comparisons. The Student's t-test was also used to compare growth patterns within each main group and genders within the subgroup. RESULTS: The study revealed statistically significant differences in the position of the mandibular lingula between different angle classifications, growth patterns, and genders. Class II samples showed a more anterior position of the ML, whereas Class III samples displayed a more posterior position of the ML. Patients with horizontal growth patterns and Angle Class III had a more posteriorly positioned ML. Gender differences were observed, particularly in Class I and Class III classifications, suggesting that gender may influence the variability of ML position in these specific classifications. CONCLUSION: The position of the mandibular lingula showed high variability among individuals with different angle classifications, growth patterns and genders.

Three-dimensional evaluation of condylar morphology after orthodontic treatment in adult patients with Class II malocclusion by cone-beam computed tomography.

BACKGROUND: The aim of this study was to evaluate the condylar morphological changes after orthodontic treatment in adult patients with Class II malocclusion using a Cone-beam computed tomography (CBCT). METHODS: Images of twenty-eight adult patients with Class II malocclusion who have no temporomandibular symptoms were involved in this study. To analyze the post-treatment changes in condylar morphology, mimics 17.0 software was used to measure several values and reconstruct the three-dimensional condyle, including height of the condyle, area and bone mineral density of the maximum axial and sagittal section, volume and bone mineral density of the three-dimensional condyle and condylar head before and after orthodontic treatment. Using SPSS 19.0 software package Paired t-test was applied for comparison of condylar morphology analysis between pre-treatment and post-treatment. RESULTS: Height of condylar head increase significant (P < .05). Bone mineral density showed a decrease in the maximum axial and sagittal section, three-dimensional condyle and condylar head (P < .01). Evaluation of volume revealed that volume of both condyle and condylar head decrease considerably (P < .05). No significant difference was detected in other values ((P > .05). CONCLUSION: Condylar volume decreased and height of condylar head have changed, so we speculated that adaptive bone remodeling of the condyle occurs.

The surgical outcomes of anterior segmental osteotomy in Asian skeletal class II patients.

PURPOSE: Anterior segmental osteotomy (ASO) following the surgery-first approach is a long-established treatment modality to resolve lip protrusion in patients with skeletal class II patterns. However, the indications and effectiveness of ASO still remain uncertain. The objective of this study is to investigate the effectiveness of ASO in Asian skeletal class II patients by evaluating the skeletal and soft tissue changes and analyzing pre-treatment variables that determine successful outcomes in occlusal as well as esthetic aspects. METHODS: The lateral cephalograms of 44 skeletal class II patients who underwent ASO and orthodontic treatment for resolving lip protrusion were retrospectively collected. Hard and soft tissue variables of two groups, normalized (NG) and unnormalized (UNG) ANB after treatment were compared and analyzed. The rotational effect of the anterior segment on the hard and soft tissue was also investigated. RESULTS: ASO was successful in correcting the skeletal class II relationship and lip protrusion (ΔANB - 2.3°, 4-5 mm lips retraction) in most cases. However, for patients with severely camouflaged skeletal class II incisors involving a large ANB and SNA, a large ANB still remained post-treatment. The study also found that rotation of the upper and lower anterior segments further augmented the amount of lip retraction. CONCLUSIONS: ASO was found to successfully correct ANB of skeletal class II patients under the following conditions (ANB 5.3° ± 1.5°, SNB 77.3° ± 4.5°, U1 to FH 115° ± 7.5, L1 to FH 48.0° ± 4.6). However, patients with larger ANB and SNA values may require bi-maxillary surgery. In addition, ASO has limitations in correcting gummy smile in cases of extreme maxillary excess. For patients requiring a large amount of lip retraction, rotation of the anterior segment may be beneficial in conjunction with bi-maxillary surgery.

Adult female skeletal anterior open bite treated by customized lingual orthodontic appliance with miniscrews-assisted in vertical control for perfect orthodontic compensation: A case report with 5-year follow-up.

The benefits of lingual orthodontics go beyond appearance. In this case study, a 30-year-old female patient was treated with a custom lingual orthodontic appliance for a Class II high-angle malocclusion, anterior open bite, incisor biprotrusion and crossbite, unilateral second molar scissor bite and dysfunctional tongue thrust. To achieve a counterclockwise rotation of the mandible, implant anchorage was used to control the vertical height. To complete the compensatory therapy, four first premolars were removed. As well as ensuring aesthetics over the 20-month treatment period, the treatment also established a Class I molar relationship, normal overbite and overjet, and improved the facial profile. After a five-year follow-up, the treatment results remained stable.

Comparative evaluation of the dentoalveolar effects of three Class II correctors: A finite element analysis study.

OBJECTIVE: To compare the stress distribution and total strain applied to the dentition, periodontal ligament (PDL) and cortical and trabecular bones by three Class II correctors using finite element analysis. DESIGN: Three-dimensional analysis of stresses and total strain of the dentition with three Class II correctors. SETTING: Computational study. METHODS: Three-dimensional finite element models of Class II elastics, the Forsus Fatigue Resistant Device (FRD) and the Carriere Motion Appliance (CMA) were constructed from a cone-beam computed tomography (CBTC) image of an orthodontic Class II patient. The distribution of stress (von Mises and principal stress) and the total strain (mm) in maxillo-mandibular dentition, PDL, cortical and trabecular bone were analysed. RESULTS: The highest von Mises yield and the maximum principal stress in the three models were found at the teeth, followed by the cortical bone, trabecular bone and PDL. The maximum stress and total deformation were located at the upper canines and lower molars in the Class II elastics and CMA models, in the upper first molars in the Forsus FRD and CMA, and in the lower first premolars in the Forsus FRD. In addition, stress was distributed in the anterior and posterior regions of the teeth, and the total deformation was found in the distal direction in the upper arch and in the mesial direction in the lower arch. CONCLUSION: The stress concentrations in the three models were located close to the active components of each appliance, producing specific patterns of stress distribution and displacement that should be taken into account when planning the type of appliance to be used for the correction of the Class II malocclusion.

Invisible treatment with lingual appliance for the correction of an adult class II subdivision with asymmetrical Wilson and Spee curves: A case report.

This article describes a class II subdivision malocclusion successfully treated by an invisible lingual appliance. The combination of en-masse distalization by interradicular palatal mini-screws and inner unilateral class II auxiliaries, first by intermaxillary elastic, later by a class II coil spring, resulted in a dento-alveolar correction, allowing one to maintain the appliance completely invisible. At the same time, the inclination of buccal sectors was normalized by a correct torque expression with set-up overcorrections, resulting in a significant improvement of the buccal corridors. This case report demonstrates the possibility of successfully solving class II division 2 subdivision malocclusion in adult patients without surgery by means of a completely invisible appliance. It also demonstrates that correct levelling and torque expression, for the correction of asymmetrical Spee and Wilson curves, are achievable with an accurate set-up planning. On the other hand, it underlines the necessity of mini-screws, auxiliaries and set-up overcorrections in order to obtain the best results.

Three-dimensional analysis of posterior tooth inclinations in transverse and sagittal relationships: A cross-sectional study.

OBJECTIVE: To compare tooth inclinations in different sagittal skeletal patterns and transverse maxillary relationships three-dimensionally. METHODS: A cross-sectional study carried out with 132 three-dimensional digital models in the complete permanent dentition divided into six groups (n=22); three groups with maxillary atresia: G1- skeletal class I, G2- skeletal class II and G3-skeletal class III; three groups without maxillary atresia: G4- skeletal class I; G5- skeletal class II and G6- skeletal class III. The comparison between the skeletal pattern was performed by the non-parametric tests of Kruskal Wallis and Dunn and between the groups by the non-parametric test of Mann Whitney. RESULTS: Subjects with skeletal class II and maxillary atresia had a greater lingual inclination of the maxillary teeth than those with class I and III; Subjects with skeletal class II without atresia had a less lingual inclination of the mandibular molars than the other classes (p<0.05). The maxillary premolars showed no variation in dental inclination with atresia, independent of the skeletal class in G1, G2, and G3 (p>0.05). The mandibular premolars showed that the groups without atresia G4, G5, and G6 presented no significant difference (p>0.05). Lower premolars in skeletal class III malocclusion individuals with atresia had a more negative inclination than the others. CONCLUSION: There is a difference in the inclination of posterior teeth between individuals with and without maxillary atresia and skeletal classes I, II, and III.

Asymmetry in Class II subdivision malocclusion: Assessment based on 3D surface models.

INTRODUCTION: There is currently no consensus in the literature whether the aetiology of a Class II subdivision is dental, skeletal or both. The aim of this study was to identify and quantify skeletal and dental asymmetries in Class II subdivision malocclusions. METHODS: CBCTs from 33 Class II subdivision malocclusion patients were used to construct 3D volumetric label maps. Eighteen landmarks were identified. The original scan and associated 3D volumetric label map were mirrored. Registration of the original and mirrored images relative to the anterior cranial base, maxilla and mandible were performed. Surface models were generated, and 3D differences were quantified. Statistical analysis was performed. RESULTS: Anterior cranial base registration showed significant differences for fossa vertical difference, fossa roll, mandibular yaw, mandibular lateral displacement and lower midline displacement. Regional registrations showed significant differences for antero-posterior (A-P) mandibular length, maxillary roll, A-P maxillary first molar position, maxillary first molar yaw and maxillary first molar roll. Class II subdivision patients also show an asymmetric mandibular length as well as an asymmetric gonial angle. Moderate correlations were found between the A-P molar relationship and fossa A-P difference, mandibular first molar A-P difference, maxillary first molar A-P difference and maxillary first molar yaw. CONCLUSIONS: This study suggests that Class II subdivisions can result from both significant skeletal and dental factors. Skeletal factors include a shorter mandible as well as posterior and higher displacement of the fossa on the Class II side, resulting in mandibular yaw. Dental factors include maxillary and mandibular first molar antero-posterior asymmetry.

The skeletal and dental effects of Hanks Herbst versus twin block appliances for class II correction in growing patients: a randomized clinical trial.

BACKGROUND: Despite the popularity of the Twin Block (TB) and the Hanks Herbst (HH) functional appliances, there is limited prospective research comparing these removable and fixed designs, respectively. OBJECTIVES: To evaluate and compare the skeletal and dental effects associated with TB and HH functional appliances as well as to detect factors that might influence the success or failure of treatment in adolescents with Class II malocclusion. DESIGN AND SETTING: A parallel-group randomized controlled trial was undertaken in a single-centre hospital in the United Kingdom. METHODS: A total of 80 participants (aged 10-14 years) with overjet of 7 mm or more were randomized to receive either the HH or TB appliance. Cephalometric radiographs were collected at the start of the study and immediately after the withdrawal of the functional appliances and measured using Pancherz analysis. Participants were allocated to the TB or HH group, based on an electronic randomization, stratified for gender and allocation concealed. Blinding to the allocated arm was not possible. However, all data were coded and anonymized to ensure that assessors were blinded to the group allocation. The main outcome was the anterior-posterior skeletal and dento-alveolar changes at the end of the functional phase. RESULTS: Fifteen (37.5%) participants from the TB group and 7 (15.5%) from HH failed to achieve full overjet reduction (<4 mm) after 12 months of treatment. Overjet reduction was 2 mm greater with HH compared to TB (P = .05; 95% CI: 0.2, 3.2). No significant differences regarding skeletal and dental changes were reported, with the exception that participants in HH group experienced greater lower molar protraction (P = .002; 95% CI: -2.8, -0.8) and mandibular incisors advancement (P = .001; 95% CI: -2.9, -1), indicating greater dental than skeletal effects. CONCLUSION: The TB appliance was associated with a higher rate of treatment discontinuation. No significant clinical differences were observed in the skeletal and dental effects, although the HH may be associated with more pronounced effects on the mandibular dentition. CLINICAL TRIAL REGISTRATION: The protocol was registered online before the start of the trial (ISRCTN11717011).