Removable dental prostheses and difficulties with chewing among frail individuals: Results from the Swiss SAPALDIA cohort.

Oral healthcare among the frail is an underestimated geriatric care element. While neglected oral health (OH) is a well-established risk factor for frailty, frailty can be a risk factor for subsequent OH problems. The cross-sectional investigation nested into the SAPALDIA sub-cohort of citizens aged 52 years and older, aims to stimulate longitudinal research into aspects that accelerate poor OH among frail individuals. The hypothesis investigated was that (pre-) frail individuals are more likely to have missing teeth replaced with removable dental prostheses (RDP) resulting in difficulties with chewing. The study included 1489 participants undergoing geriatric assessments and oral examination. The main predictor was frailty status (non-frail; pre-frail; frail), based on Fried's frailty phenotype. The main outcomes of interest were non-functional dentition (presence of ≤ 19 natural teeth), presence of any RDP and self-reported difficulties with chewing. Pre-frailty and frailty were not associated with the presence of ≤ 19 natural teeth, but were associated with a higher RDP prevalence. The presence of at least one complete denture (CD) had 1.71 fold and 2.54 folds higher odds among pre-frail and frail, respectively, compared to non-frail individuals. Frail individuals with CD reported chewing difficulties 7.8 times more often than non-frail individuals without CD. The results are in line with the hypothesis that (pre-) frail individuals may be more likely to have tooth loss restored by RDPs. Future longitudinal research needs to assess potential barriers to oral hygiene and fixed dental prostheses among (pre-) frail and to study their oral health-related quality of life.

Tradeoffs between bite force and gape in Eulemur and Varecia.

In 1974, Sue Herring described the relationship between two important performance variables in the feeding system, bite force and gape. These variables are inversely related, such that, without specific muscular adaptations, most animals cannot produce high bite forces at large gapes for a given sized muscle. Despite the importance of these variables for feeding biomechanics and functional ecology, the paucity of in vivo bite force data in primates has led to bite forces largely being estimated through ex vivo methods. Here, we quantify and compare in vivo bite forces and gapes with output from simulated musculoskeletal models in two craniofacially distinct strepsirrhines: Eulemur, which has a shorter jaw and slower chewing cycle durations relative to jaw length and body mass compared to Varecia. Bite forces were collected across a range of linear gapes from 16 adult lemurs (suborder Strepsirrhini) at the Duke Lemur Center in Durham, North Carolina representing three species: Eulemur flavifrons (n = 6; 3F, 3M), Varecia variegata (n = 5; 3F, 2M), and Varecia rubra (n = 5; 5F). Maximum linear and angular gapes were significantly higher for Varecia compared to Eulemur (p = .01) but there were no significant differences in recorded maximum in vivo bite forces (p = .88). Simulated muscle models using architectural data for these taxa suggest this approach is an accurate method of estimating bite force-gape tradeoffs in addition to variables such as fiber length, fiber operating range, and gapes associated with maximum force. Our in vivo and modeling data suggest Varecia has reduced bite force capacities in favor of absolutely wider gapes compared to Eulemur in relation to their longer jaws. Importantly, our comparisons validate the simulated muscle approach for estimating bite force as a function of gape in extant and fossil primates.

Patient-reported outcomes during accelerating the en-masse retraction of the upper anterior teeth using low-intensity electrical stimulation: a randomized controlled trial.

BACKGROUND: Low-intensity electrical stimulation (LIES) is considered a relatively recent technology that has received little attention in orthodontics as a method of acceleration. This study aimed to evaluate patient-reported outcome measures when LIES is used to accelerate the en-masse retraction of the upper anterior teeth. MATERIALS AND METHODS: The sample consisted of 40 patients (8 males, 32 females; mean age 21.1 ± 2.3 years), with Class II division I malocclusion who required extraction of the first premolars to retract upper anterior teeth. They were randomly assigned to the LIES group (n = 20) and the conventional en-masse retraction group (CER; n = 20). Patient responses regarding pain, discomfort, burning sensation, swelling, chewing difficulty, speech difficulty, and painkillers' consumption were recorded at these nine assessment times: 24 h (T1), 3 days (T2), and 7 days (T3) after force application, then in the second month after 24 h (T4), 3 days (T5), and 7 days (T6) of force re-activation, and finally after 24 h (T7), 3 days (T8), and 7 days (T9) of force re-activation in the third month. RESULTS: The mean values of pain perception were smaller in the LIES group than those in the CER group at all assessment times with no statistically significant differences between the two groups except during the second and third months (T5, T6, T8, and T9; P < 0.005). However, discomfort mean values were greater in the LIES group with significant differences compared to CER group during the first week of the follow-up only (T1, T2, and T3; P < 0.005). Burning sensation levels were very mild in the LIES group, with significant differences between the two groups at T1 and T2 only (P < 0.001). Speech difficulty was significantly greater in the LIES group compared to CER group at all studied times (P < 0.001). High levels of satisfaction and acceptance were reported in both groups, without any significant difference. CONCLUSION: Both the LIES-based acceleration of en-masse retraction of upper anterior teeth and the conventional retraction were accompanied by mild to moderate pain, discomfort, and chewing difficulty on the first day of retraction. These sensations gradually decreased and almost disappeared over a week after force application or re-activation. TRIAL REGISTRATION: ClinicalTrials.gov, ClinicalTrials.gov, NCT05920525. Registered 17 June 2023 - retrospectively registered, http://clinicaltrials.gov/study/NCT05920525?term=NCT05920525&rank=1 .

Mandibular overdenture with a single implant in the canine region (c-SIMO): a feasibility study.

OBJECTIVES: The aim of this multi-center pilot study was to assess the viability and feasibility of a novel treatment concept - the canine-positioned single implant mandibular overdenture (c-SIMO), with the single implant placed on the patient's preferred chewing side instead of the midline. MATERIALS AND METHODS: Participants received a single implant in the canine region of their preferred chewing side, based on an Asymmetry Index observed during mastication. The pre-existing mandibular denture was transformed into a c-SIMO on a spherical attachment. The primary outcome was oral health-related quality of life (OHRQoL), measured with GOHAI and OHIP-EDENT. Secondary outcomes included denture satisfaction index (DSI), chewing efficiency (CE), maximum bite force (MBF), implant survival and success, and prosthetic maintenance. Data analysis included descriptive statistics and bivariate comparison tests. RESULTS: Fifteen participants received the c-SIMO treatment (mean age: 69.9 ± 7.0). Implant success and survival rates were 100% at 1 year. Patient-reported outcome measures improved significantly compared to pre-treatment values (OHIP-EDENT: p = 0.001; DSI: p = 0.001; GOHAI: p = 0.002). Masticatory outcomes also improved significantly (CE: p = 0.001; overall MBF: p = 0.005). Post-implant, MBF was significantly higher in the ipsilateral side compared to the contralateral side at 2 weeks (p = 0.019) and 3 months (p = 0.015), but no longer at T3 (p = 0.730). Common prosthodontic events included denture base adjustments (n = 17) and matrix activation (n = 9). CONCLUSIONS: This pilot study concludes that c-SIMO is a promising treatment option, and a potential alternative to the single midline implant overdenture. CLINICAL RELEVANCE: The novel treatment concept of a canine-positioned single implant mandibular overdenture could be a viable treatment alternative to the midline positioning.

Chewing asymmetry in dogs: Exploring the importance of the fossa masseterica and first molar teeth morphology.

Dogs are animals with strong bite force. This strong bite mechanism has led to significant changes in the skeletal system such as fossa masseterica. It can be thought that one side is used more than the other side in chewing and is related to the preference of using the same side's hand, eye and foot. In the study, directional asymmetry and fluctuating asymmetry, which occurs as a result of chewing asymmetry, were examined on the first molar teeth and the fossa masseterica in 85 dog mandibles including a wide diversity of morphotypes. The association of high PC1 values for directional asymmetry with a pronounced cranial index, as evident in breeds like Pekingese, Pomeranian and Bulldog, indicates a potential evolutionary or selective breeding trend favouring brachycephaly. On the contrary, guardian breeds like the German shepherd and Bernese mountain dog, which typically require strong jaws for their roles, showcased reduced PC1 values, which might be related to their functional morphology. Similarly, the PCA results for the first molar teeth shape variations also highlighted the influence of cranial shape, with boxer dogs displaying notably higher PC1 values. The fluctuating asymmetrical distributions provided valuable insights into individualistic variations. Interestingly, no specific breed distribution trend was observed for these asymmetries, indicating a more individual-based variation rather than breed-based. It is essential to note that while these results provide valuable insights, further studies are required to understand the underlying causes better. Factors like genetic variations, developmental processes, dietary habits and external environmental factors could play pivotal roles in these observed morphological differences.

Prolonged use of a soft diet during early growth and development alters feeding behavior and chewing kinematics in a young animal model.

In infants and children with feeding and swallowing issues, modifying solid foods to form a liquid or puree is used to ensure adequate growth and nutrition. However, the behavioral and neurophysiological effects of prolonged use of this intervention during critical periods of postnatal oral skill development have not been systematically examined, although substantial anecdotal evidence suggests that it negatively impacts downstream feeding motor and coordination skills, possibly due to immature sensorimotor development. Using an established animal model for infant and juvenile feeding physiology, we leverage X-ray reconstruction of moving morphology to compare feeding behavior and kinematics between 12-week-old pigs reared on solid chow (control) and an age- and sex-matched cohort raised on the same chow softened to a liquid. When feeding on two novel foods, almond and apple, maintenance on a soft diet decreases gape cycle duration, resulting in a higher chewing frequency. When feeding on almonds, pigs in this group spent less time ingesting foods compared to controls, and chewing cycles were characterized by less jaw rotation about a dorsoventral axis (yaw) necessary for food reduction. There was also a reduced tendency to alternate chewing side with every chew during almond chewing, a behavioral pattern typical of pigs. These more pronounced impacts on behavior and kinematics during feeding on almonds, a tougher and stiffer food than apples, suggest that food properties mediate the behavioral and physiological impacts of early texture modification and that the ability to adapt to different food properties may be underdeveloped. In contrast, the limited effects of food texture modification on apple chewing indicate that such intervention/treatment does not alter feeding behavior of less challenging foods. Observed differences cannot be attributed to morphology because texture modification over the treatment period had limited impact on craniodental growth. Short-term impacts of soft-texture modification during postweaning development on feeding dynamics should be considered as potential negative outcomes of this treatment strategy.

Effects of dietary forage neutral detergent fiber and rumen degradable starch ratios on chewing activity, ruminal fermentation, ruminal microbes and nutrient digestibility of Hu sheep fed a pelleted total mixed ration.

Pelleted total mixed ration (P-TMR) feeding, which has become a common practice in providing nutrition for fattening sheep, requires careful consideration of the balance between forage neutral detergent fiber (FNDF) and rumen degradable starch (RDS) to maintain proper rumen functions. The present study aimed to investigate the effects of the dietary FNDF/RDS ratio (FRR) on chewing activity, ruminal fermentation, ruminal microbes, and nutrient digestibility in Hu sheep fed a P-TMR diet. This study utilized eight ruminally cannulated male Hu sheep, following a 4 × 4 Latin square design with 31 d each period. Diets consisted of four FRR levels: 1.0 (high FNDF/RDS ratio, HFRR), 0.8 (middle high FNDF/RDS ratio, MHFRR), 0.6 (middle low FNDF/RDS ratio, MLFRR), and 0.4 (low FNDF/RDS ratio, LFRR). Reducing the dietary FRR levels resulted in a linear decrease in ruminal minimum pH and mean pH, while linearly increasing the duration and area of pH below 5.8 and 5.6, as well as the acidosis index. Sheep in the HFRR and MHFRR groups did not experience subacute ruminal acidosis (SARA), whereas sheep in another two groups did. The concentration of total volatile fatty acid and the molar ratios of propionate and valerate, as well as the concentrate of lactate in the rumen linearly increased with reducing dietary FRR, while the molar ratio of acetate and acetate to propionate ratio linearly decreased. The degradability of NDF and ADF for alfalfa hay has a quadratic response with reducing the dietary FRR. The apparent digestibility of dry matter, organic matter, neutral detergent fiber, and acid detergent fiber linearly decreased when the dietary FRR was reduced. In addition, reducing the dietary FRR caused a linear decrease in OTUs, Chao1, and Ace index of ruminal microflora. Reducing FRR in the diet increased the percentage of reads assigned as Firmicutes, but it decreased the percentage of reads assigned as Bacteroidetes in the rumen. At genus level, the percentage of reads assigned as Prevotella, Ruminococcus, Succinivibrio, and Butyrivibrio linearly decreased when the dietary FRR was reduced. The results of this study demonstrate that the dietary FRR of 0.8 is crucial in preventing the onset of SARA and promotes an enhanced richness of ruminal microbes and also improves fiber digestibility, which is a recommended dietary FRR reference when formulating P-TMR diets for sheep.

Forage neutral detergent fiber (FNDF) and rumen degradable starch (RDS) are key components of carbohydrates in the diet for ruminants, which would reflect saliva secretion and the acid production potential of feed. However, appropriate FNDF to RDS ratios (FRR) applicable to ruminants under the condition of pelleted total mixed ration (P-TMR) feeding have not been reported. In this study, we investigated the effects of the dietary FRR on chewing activity, ruminal fermentation, ruminal microbial communities, and nutrient digestibility of Hu sheep under P-TMR feeding. The results indicate that reducing dietary FRR levels would induce acidosis in sheep, which negatively affected fiber utilization and ruminal bacterial communities. The FRR of 0.8 was a recommended dietary FRR when formulating a P-TMR diet for fattening sheep, as indicated by decreased ruminal acidosis risk and increased richness of ruminal microbes in the rumen as well as nutrient digestibility.

Social sham chewing in sows?

In this short communication, we describe chewing behaviour in sows with no apparent edible substrate in their mouth as a potential social behaviour. Chewing in sows during interaction with unfamiliar sows was unexpectedly observed in a study assessing social abilities and damaging behaviours in group-housed dry sows. Such chewing was observed frequently and performed by almost all sows. To our knowledge, this behaviour has not been described previously in a social context in pigs, but rather as an oral stereotypic behaviour related to chronic hunger. We describe the behaviour in its social context and speculate on reasons for its occurrence in that context.

Evaluation of pre- and postoperative nutrition and oral health-related quality of life in orthognathic surgery patients.

OBJECTIVE: Orthognathic surgery is a complex orofacial surgery that can significantly impact occlusal function and effect nutritional and quality of life parameters. This study aimed to evaluate alterations in dietary intake, chewing function, physical activity, and oral health-related quality of life of patients undergoing orthognathic surgery. RESEARCH METHODS AND PROCEDURES: In this prospective longitudinal study, the assessments were conducted at: preoperatively (T0) and postoperative first week (T1), second week (T2), first month (T3), and third month (T4) between May 2021 and March 2023. Sociodemographic questionnaire, 24-h dietary recall record, chewing ability form, International Physical Activity Questionnaire, and Oral Health Impact Profile-14 (OHIP-14) was applied at face-to-face interviews. RESULTS: Seventy eligible orthognathic surgery patients were evaluated, and 37 patients (52.8%) completed this study. Energy and fat intake significantly decreased from T0 to T1 (P < 0.001) and returned to basis by T4 (P = 0.015). Fiber intake was found to be lowest at T1 and T2 compared with other time points (P < 0.001). Chewing ability showed a deterioration and then improvement; however, patients still had difficulties chewing hard foods at T4. The OHIP-14 increased at T2 and T3 from T0 (P < 0.001 and P = 0.021, respectively) and showed a significant improvement at T4 (P < 0.05). CONCLUSION: The findings indicate a temporary decline in nutritional intake and chewing ability with subsequent recovery by the third month postsurgery. These changes, along with the trends in oral health-related quality of life, underscore the need for tailored nutritional and functional rehabilitation programs following orthognathic surgery.

Do astigmatid teeth matter: a tribological review of cheliceral chelae in co-occuring mites from UK beehives.

The dentition of the chelal moveable digit in cohabiting astigmatids from UK beehives (i.e., Carpoglyphus lactis (Linnaeus), Glycyphagus domesticus (DeGeer), and Tyrophagus putrescentiae (Schrank)) is characterised for the first time using quantitative tribological measures within a 2D mechanical model. The trophic function of astigmatid chelae are reviewed in terms of macroscopic tools used by humans including hooking devices, pliers, shears, rasps and saws. Comparisons to oribatid claws and isopod dactyli are made. The overall pattern of the moveable digit form of T. putrescentiae is not just a uniformly shrunken/swollen version between the other two taxa at either the macro- or micro-scale. Mastication surface macro-roughness values are in the range of international Roughness Grade Numbers N5-N6. The moveable digit of C. lactis has low rugosity values compared to the glycyphagid and acarid (which are topographically more similar and match that roughness typical of some coral reef surfaces). C. lactis has the most plesiomorphic moveable digit form. The mastication surface of all three species as a chewing tool is distinctly ornamented despite the moveable digit of C. lactis looking like a bar-like beam. The latter has more opportunities to be a multifunctional tool behaviourally than the other two species. Little evidence of any differences in the 'spikiness' of any 'toothiness' is found. Some differences with laboratory cultured specimens are found in C. lactis and possibly T. putrescentiae suggesting where selection on the digit may be able to occur. The chelal surface of T. putrescentiae has been deformed morphologically during evolution the most, that of C. lactis the least. Repeated localised surface differentiation is a feature of the moveable digit in G. domesticus compared to the likely more concerted changes over certain nearby locations in T. putrescentiae. An impactful chelal teeth design is present in G. domesticus but this is more equivocal in T. putrescentiae. Pockets within the mastication surface of the glycyphagid (and to some extent for the acarid) may produce foodstuff crunch forces of the scale of the chelal tips of oribatids. The moveable digit dentition of G. domesticus is adapted to shred foodstuff (like a ripsaw) more than that of the grazing/shearing dentition of T. putrescentiae. The collecting 'picker' design of C. lactis posterior teeth matches the size of Bettsia alvei hyphae which attacks hive-stored pollen. Detritus accumulated in chelal digit gullets through a sawing action matches the smallest observed ingested material. The dentition of C. lactis should produce less friction when moving through food material than G. domesticus. C. lactis is the most hypocarnivorous and may 'skim' through fluids when feeding. Astigmatid teeth do matter. The three commensal species can avoid direct competition. Future work is proposed in detail.

Association Between Subjective Masticatory Function and Mild Cognitive Impairment in Older Adults.

AIM: This study aimed to examine the effect of subjective masticatory function on the occurrence of mild cognitive impairment (MCI) by analysing the Korean Longitudinal Study of Ageing (KLoSA) data. METHODS: The study participants were 2954 KLoSA participants aged 60 years or older in the first wave (2006) who had normal cognitive function. The subjective masticatory function was determined using a survey item, and the responses were grouped into 3 categories, ie, good, moderate, and poor. The occurrence of MCI in the 3 groups was followed up until 2020. Cognitive function was assessed based on the Korean Mini-Mental State Examination score. Age, sex, education level, residence, health insurance type, smoking status, drinking status, and the number of chronic diseases were considered as potential confounders. To examine the occurrence of MCI according to subjective masticatory function, Cox proportional hazard regression analysis was performed. RESULTS: Cox proportional hazard regression models adjusted for confounders yielded the following results: in men, the risk of MCI was higher in those whose subjective masticatory function was moderate and poor, as compared to those with good subjective masticatory function (adjusted hazard ratio [aHR], 1.33; 95% confidence interval [CI], 1.12-1.58; aHR, 1.23; 95% CI, 1.04-1.46). In contrast, in women, subjective masticatory function did not significantly influence the occurrence of MCI (aHR, 1.05; 95% CI, 0.89-1.24; aHR, 1.08; 95% CI, 0.92-1.28). CONCLUSIONS: This study suggests that poor masticatory function may be a risk factor for MCI in older men.

Evaluation of Masticatory Function, Satisfaction, and Quality of Life Among Users of Complete Dentures Relined with Resilient Materials: A Systematic Review.

PURPOSE: To evaluate whether complete dentures (CDs) relined with long-term resilient liners (LTRLs) favor better masticatory function, satisfaction, and quality of life among completely edentulous patients compared to conventional CDs. MATERIALS AND METHODS: This review followed the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) checklist and was registered in PROSPERO (the International Prospective Register of Systematic Reviews; CRD42021258700). The population, intervention, comparison, and outcome (PICO) purpose was to determine whether CDs relined with LTRLs favor better masticatory function, satisfaction, and quality of life among completely edentulous patients when compared to CDs. Searches were performed in the PubMed/MEDLINE, Embase, Scopus, Lilacs, BBO, and OpenGrey databases. Manual searches were also performed to identify additional primary studies. RESULTS: Overall, 3,953 articles were found. After removing duplicates, reading the articles, and applying the inclusion and exclusion criteria, 15 articles were selected for qualitative analysis, totaling 422 patients with follow-up periods ranging from 1 week to 3 years. Among these, 8 studies assessed masticatory function using different methods, 2 assessed satisfaction, 1 assessed quality of life, and 4 assessed more than one outcome. Through qualitative analysis, LTRLs showed satisfactory results in most studies when compared to CDs in relation to masticatory function, satisfaction, and quality of life. CONCLUSIONS: LTRLs favor better masticatory function, satisfaction, and quality of life among completely edentulous patients compared to CDs.

Masticatory function in edentulous patients wearing implant overdentures after graftless maxillary sinus membrane elevation.

BACKGROUND: Graftless sinus floor augmentation shows good results in bone gain, radiology and implant survival. Clinically, this technique can be recommended as an alternative to conventional procedures using augmentation materials. OBJECTIVES: This study aims to assess masticatory performance, masticatory ability and patient satisfaction after graftless sinus floor augmentation. METHODS: The study group consisted of patients who had received a graftless sinus lift procedure in a split-mouth design and was compared to patients with maxillary implant-supported overdentures without augmentation and a natural dentition group. To assess objective masticatory performance, the mixing ability test was performed. Three questionnaires were used to assess patient reported outcomes related to mastication and patient satisfaction. RESULTS: Each group included ten patients. Both the graftless sinus lift group and the edentulous control group had a worse masticatory performance compared to the natural dentition group. Masticatory ability, measured by patient reported outcomes, was not different between the graftless sinus floor augmentation group and implant-retained overdentures group without augmentation, but the natural dentition group showed better results. Thereby, the better the masticatory performance in patients with a graftless sinus membrane elevation the better the patient satisfaction for 'prosthesis', 'appearance of prostheses', 'speech' and 'mastication and eating'. CONCLUSIONS: Patients with implant-supported overdentures show inferior masticatory function compared to those with natural dentition. There were no significant differences in masticatory performance between patients with implant-retained overdentures, with or without graftless augmentation. The decision on the preferred procedure should consider additional factors such as anatomical, surgical-technical aspects and patient's preferences.

The accuracy and precision of wear testing and wear facet analyses: The two sides of the story.

A critical examination of the literature for dental wear publications highlighted three distinct areas, clinical data, laboratory data and the simulation of the clinical situation data. The imprecision of the clinical data values from direct and indirect in vivo methods renders the clinical data compromised at best. Laboratory data showed a focus on finding a correlation between simplistic laboratory abrasive wear resistance studies and established materials science laboratory techniques, but with no actual correlation identified. Replication of the masticatory cycle in the mouth in the form of an oral wear simulator has focussed more on the wear testing devices rather than the wear quantification methods. As a result, the data acquisition variables in the x- and y-planes need to be examined to consider how they can influence the accuracy and precision of the laboratory wear measurements recorded in the dental literature. The current approach was undertaken using the teaching tool outlined in "The First Three Questions".

Muscle and joint mechanics during maximum force biting following total temporomandibular joint replacement surgery.

Total temporomandibular joint replacement (TMJR) surgery is the established treatment for severe temporomandibular joint disorders. While TMJR surgery is known to increase mouth-opening capacity, reduce pain and improve quality of life, little is known about post-surgical jaw function during activities of daily living such as biting and chewing. The aim of this study was to use subject-specific 3D bite force measurements to evaluate the magnitude and direction of joint loading in unilateral total TMJR patients and compare these data to those in healthy control subjects. An optoelectronic tracking system was used to measure jaw kinematics while biting a rubber sample for 5 unilateral total TMJR patients and 8 controls. Finite element simulations driven by the measured kinematics were employed to calculate the resultant bite force generated when compressing the rubber between teeth during biting tasks. Subject-specific musculoskeletal models were subsequently used to calculate muscle and TMJ loading. Unilateral total TMJR patients generated a bite force of 249.6 ± 24.4 N and 164.2 ± 62.3 N when biting on the contralateral and ipsilateral molars, respectively. In contrast, controls generated a bite force of 317.1 ± 206.6 N. Unilateral total TMJR patients biting on the contralateral molars had a significantly higher lateral TMJ force direction (median difference: 63.6°, p = 0.028) and a significantly lower ratio of working TMJ force to bite force (median difference: 0.17, p = 0.049) than controls. Results of this study may guide TMJ prosthesis design and evaluation of dental implants.

Natural History of Mandibular Function in Spinal Muscular Atrophy Types 2 and 3.

Background: Hereditary proximal spinal muscular atrophy (SMA) is characterized by abnormal alpha motor neuron function in brainstem and spinal cord. Bulbar dysfunction, including limited mouth opening, is present in the majority of patients with SMA but it is unknown if and how these problems change during disease course. Objective: In this prospective, observational, longitudinal natural history study we aimed to study bulbar dysfunction in patients with SMA types 2 and 3. Methods: We included 44 patients with SMA types 2 and 3 (mean age was 33.6 (95% CI 28.4;38.9) and re-examined them after on average 4 years. None were treated with SMN-modulating treatments before or during the course of this study. Longitudinal assessments included a questionnaire on mandibular and bulbar function, the Mandibular Function Impairment Questionnaire (MFIQ), and a clinical examination of masticatory performance, maximum voluntary bite force, and mandibular movements including the active maximal mouth opening. Results: We found significant higher MFIQ scores and a significant decrease of all mandibular movements in patients with SMA type 2 (p < 0.001), but not in SMA type 3. Masticatory performance and maximum voluntary bite force did not change significantly. Mean reduction of active maximal mouth opening at follow-up was 3.5 mm in SMA type 2 (95% CI: 2.3; 4.7, p < 0.001). SMA type 2 was an independent predictor for a more severe reduction of the mouth opening (ß= -2.0 mm (95% CI: -3.8; -0.1, p = 0.043)). Conclusions: Bulbar functions such as mandibular mobility and active maximum mouth opening decrease significantly over the course of four years in patients with SMA type 2.

The effect of different pain characteristics on jaw functional limitations in patients with temporomandibular disorders.

BACKGROUND: Patients with painful temporomandibular disorders (TMD) more often experience jaw functional limitations. The study of jaw functional limitations should be primarily focused on painful TMD. OBJECTIVES: The impact of TMD pain characteristics (source, chronicity and intensity) on jaw functional limitations were evaluated using Jaw Functional Limitation Scale (JFLS). METHODS: This cross-sectional study reviewed the dental records and self-report questionnaires of patients with painful TMD. The pain source, chronicity and intensity were evaluated to study the TMD pain characteristics. The jaw functional limitations were analysed using the Thai version of the JFLS. RESULTS: A total of 176 patients with painful TMD were included in this study. The jaw functional limitations were affected only by pain intensity. Patients with TMD with severe pain intensity had significantly higher jaw functional limitations than those with mild-to-moderate pain intensity (p < .05). A significant association was observed between pain intensity and jaw functional limitations (p < .05). Mastication was highly restricted by pain intensity (odd ratio = 1.39, 95% confidence interval = 1.16-1.67). CONCLUSION: The present study found a significant effect of TMD pain intensity on jaw functional limitations. Patients with severe TMD pain intensity were more likely to experience jaw functional limitations, particularly mastication limitation. Management focusing on reduction of pain intensity may improve jaw functions in patients with TMD.

Comparative analysis of masseter muscle electrical activity by nasal patency in children with rhinitis and asthma: a pilot observational study.

PURPOSE: This pilot cross-sectional study aimed to evaluate differences in electromyographic activity patterns of the masseter muscle according to the nasal patency in children with rhinitis and asthma. METHODS: The study included 43 children aged 5-14 years with rhinitis and/or asthma. Patients underwent peak nasal inspiratory flow (PNIF) measurement to assess nasal patency, and electromyographic evaluation of the right and left masseter muscles during chewing and at rest. Electromyographic activity patterns according to nasal patency were compared using the Mann-Whitney test, and effect sizes were measured using the Glass rank biserial (rb) correlation. A p-value of < 0.05 was considered statistically significant. RESULTS: No significant differences in electromyographic activity of the masseter muscle at rest, during unilateral chewing, or during habitual chewing were found between the groups. However, we found that patients with low nasal patency had a median electric activity of the right masseter muscle during maximum contraction of 60.53 (51.74-72.43), while those with adequate nasal patency had a median of 77.40 (56.71-88.45). Although the difference in myoelectric activity between the groups did not reach statistical significance (p = 0.061) at the adopted significance level of 5%, the size of the difference between groups were considered moderate (rb = 0.338) and a potential association between nasal patency and the muscular function of the masseter muscle could be suggested. CONCLUSION: The study found no differences in the electromyographic activity of the masseter muscle at rest, during unilateral chewing, or during habitual chewing among children with rhinitis and asthma based on nasal patency. Further research with larger sample sizes is needed to validate these findings and gain a better understanding of the impact of nasal patency on the muscular function of the masseter muscle.

[Evaluation of the efficiency of the method of biological feedback in complex therapy of patients with hypertonus of the chewing muscles]. / Metod biologicheskoi obratnoi svyazi v kompleksnoi terapii patsientov s gipertonusom zhevatel'nykh myshts.

The aim the study. Evaluate the effectiveness of biofeedback therapy in the complex rehabilitation of masticatory muscle hypertonicity in patients with a high level of anxiety. MATERIAL AND METHODS: The study included 40 patients aged 20 to 32 years with complaints of fatigue and discomfort in the area of chewing muscles, teeth compression during the day, nocturnal bruxism, crowding of teeth. Two groups were formed: the study group, whose patients underwent splint therapy in combination with biofeedback therapy trainings; in the control group, patients received treatment with splint therapy without the use of biofeedback therapy. Electromyography of the masticatory muscles at rest and during compression were used to diagnose hypertonicity of the masticatory muscles. To assess the psycho-emotional state, a medical and social questionnaire was conducted using questionnaires: «Health Questionnaire¼, Beck Depression Inventory, Spielberger-Khanin Anxiety Scale, SF-16 Quality of Life Scale. RESULTS: A decrease in the level of depression, anxiety was revealed with the stabilization of emotional sensitivity in relation to other people, emotional involvement in everyday life, and an increase in the quality of life. When comparing electromyographic data at rest and during clenching of teeth in patients of the study group the indicators were lower than in the control group. CONCLUSIONS: The effectiveness of biofeedback therapy at the stages of orthodontic treatment using splint therapy was established in the form of a decrease in the activity of masticatory muscles in patients of the study group. In the control group, the index of masticatory muscle activity decreased to a lesser extent. Biofeedback methods have shown a high level of effectiveness in reducing the symptoms of anxiety and depression, improving the quality of life.

Reliability between the two-colour chewing gum and the gummy-jelly tests used for the assessment of masticatory performance.

OBJECTIVE: This study aimed to evaluate the reliability of two methods used to assess masticatory performance and attempt to correlate them to achieve interchangeability between the methods. METHODS: Twelve healthy dentate volunteers (men = 6, women = 6; mean age = 28.3 ± 4.1) with no known dental or medical pathologies were requested to participate in this study. Each participant completed three masticatory performance assessments, including two two-colour mixing-ability tests using chewing-gums (CG: gum#1 and gum#2) and the gummy-jelly (GJ) test. For each method, participants created five samples each (total = 15 measurements per participant, gum#1 = 5, gum#2 = 5, GJ = 5). For the gum#1 and gum#2 methods, the predetermined chewing cycles were fixed at 10, 15, 20, 25 and 30 cycles, and for the GJ method, the time duration was fixed at 10, 15, 20, 25 and 30 s. The parameter measures were submitted to Z-score transformation, and Bland-Altman plots were generated to graphically compare the differences between two techniques against their means. Additionally, mountain plot was used to assess the cumulative distribution of measurement error between the methods. RESULTS: A total of 180 measurements were recorded. There were significant correlations between the number of chewing cycles/chewing time and masticatory performance using the gum#1 (r = -.753; p < .001), gum#2 (r = -.838; p < .001) and GJ (r = .730). When all tests were considered together for each method, significant correlations were found (p < .001). A descriptive range of mean values aiming to produce reference value ranges for predictive purposes was achieved considering the interchangeably among the methods [CG = GJ (VoH-mg = dL): 10 cycle = 10 s: 0.329 = 110; 15 cycles = 15 s: 0.177 = 164; 20 cycles = 20 s: 0.130 = 205; 25 cycles = 25 s: 0.086 = 200; 30 cycles = 30 s: 0.077 = 267]. CONCLUSION: The strong correlations and high consistency between the two masticatory performance methods found in this study conclude that the two assessment methods are reliable and interchangeable. Further evaluations are warranted to arrive at a conversion formula for translation of the results between the two methods.