The biophysical and compositional properties of human basement membranes.

Basement membranes are among the most widespread, non-cellular functional materials in metazoan organisms. Despite this ubiquity, the links between their compositional and biophysical properties are often difficult to establish due to their thin and delicate nature. In this article, we examine these features on a molecular level by combining results from proteomics, elastic, and nanomechanical analyses across a selection of human basement membranes. Comparing results between these different membranes connects certain compositional attributes to distinct nanomechanical signatures and further demonstrates to what extent water defines these properties. In all, these data underline BMs as stiff yet highly elastic connective tissue layers and highlight how the interplay between composition, mechanics and hydration yields such exceptionally adaptable materials.

Basement membrane dynamics and mechanics in tissue morphogenesis.

The basement membrane (BM) is a thin, planar-organized extracellular matrix that underlies epithelia and surrounds most organs. During development, the BM is highly dynamic and simultaneously provides mechanical properties that stabilize tissue structure and shape organs. Moreover, it is important for cell polarity, cell migration, and cell signaling. Thereby BM diverges regarding molecular composition, structure, and modes of assembly. Different BM organization leads to various physical features. The mechanisms that regulate BM composition and structure and how this affects mechanical properties are not fully understood. Recent studies show that precise control of BM deposition or degradation can result in BMs with locally different protein densities, compositions, thicknesses, or polarization. Such heterogeneous matrices can induce temporospatial force anisotropy and enable tissue sculpting. In this Review, I address recent findings that provide new perspectives on the role of the BM in morphogenesis.

Cryo-EM reveals the molecular basis oflaminin polymerization and LN-lamininopathies.

Laminin polymerization is the major step in basement membranes assembly. Its failures cause laminin N-terminal domain lamininopathies including Pierson syndrome. We have employed cryo-electron microscopy to determine a 3.7 Å structure of the trimeric laminin polymer node containing α1, ß1 and γ1 subunits. The structure reveals the molecular basis of calcium-dependent formation of laminin lattice, and provides insights into polymerization defects manifesting in human disease.

Defining invasion in breast cancer: the role of basement membrane.

Basement membrane (BM) is an amorphous, sheet-like structure separating the epithelium from the stroma. BM is characterised by a complex structure comprising collagenous and non-collagenous proteoglycans and glycoproteins. In the breast, the thickness, density and composition of the BM around the ductal lobular system vary during differing development stages. In pathological conditions, the BM provides a physical barrier that separates proliferating intraductal epithelial cells from the surrounding stroma, and its absence or breach in malignant lesions is a hallmark of invasion and metastases. Currently, diagnostic services often use special stains and immunohistochemistry (IHC) to identify the BM in order to distinguish in situ from invasive lesions. However, distinguishing BM on stained sections, and differentiating the native BM from the reactive capsule or BM-like material surrounding some invasive malignant breast tumours is challenging. Although diagnostic use of the BM is being replaced by myoepithelial cell IHC markers, BM is considered by many to be a useful marker to distinguish in situ from invasive lesions in ambiguous cases. In this review, the structure, function and biological and clinical significance of the BM are discussed in relation to the various breast lesions with emphasis on how to distinguish the native BM from alternative pathological tissue mimicking its histology.

Mimicking the Natural Basement Membrane for Advanced Tissue Engineering.

Advancements in the field of tissue engineering have led to the elucidation of physical and chemical characteristics of physiological basement membranes (BM) as specialized forms of the extracellular matrix. Efforts to recapitulate the intricate structure and biological composition of the BM have encountered various advancements due to its impact on cell fate, function, and regulation. More attention has been paid to synthesizing biocompatible and biofunctional fibrillar scaffolds that closely mimic the natural BM. Specific modifications in biomimetic BM have paved the way for the development of in vitro models like alveolar-capillary barrier, airway models, skin, blood-brain barrier, kidney barrier, and metastatic models, which can be used for personalized drug screening, understanding physiological and pathological pathways, and tissue implants. In this Review, we focus on the structure, composition, and functions of in vivo BM and the ongoing efforts to mimic it synthetically. Light has been shed on the advantages and limitations of various forms of biomimetic BM scaffolds including porous polymeric membranes, hydrogels, and electrospun membranes This Review further elaborates and justifies the significance of BM mimics in tissue engineering, in particular in the development of in vitro organ model systems.

Designing Cardiovascular Implants Taking in View the Endothelial Basement Membrane.

Insufficient endothelialization of cardiovascular grafts is a major hurdle in vascular surgery and regenerative medicine, bearing a risk for early graft thrombosis. Neither of the numerous strategies pursued to solve these problems were conclusive. Endothelialization is regulated by the endothelial basement membrane (EBM), a highly specialized part of the vascular extracellular matrix. Thus, a detailed understanding of the structure-function interrelations of the EBM components is fundamental for designing biomimetic materials aiming to mimic EBM functions. In this review, a detailed description of the structure and functions of the EBM are provided, including the luminal and abluminal interactions with adjacent cell types, such as vascular smooth muscle cells. Moreover, in vivo as well as in vitro strategies to build or renew EBM are summarized and critically discussed. The spectrum of methods includes vessel decellularization and implant biofunctionalization strategies as well as tissue engineering-based approaches and bioprinting. Finally, the limitations of these methods are highlighted, and future directions are suggested to help improve future design strategies for EBM-inspired materials in the cardiovascular field.

Basement membrane proteins in various arterial beds from individuals with and without type 2 diabetes mellitus: a proteome study.

BACKGROUND: Basement membrane (BM) accumulation is a hallmark of micro-vessel disease in diabetes mellitus (DM). We previously reported marked upregulation of BM components in internal thoracic arteries (ITAs) from type 2 DM (T2DM) patients by mass spectrometry. Here, we first sought to determine if BM accumulation is a common feature of different arteries in T2DM, and second, to identify other effects of T2DM on the arterial proteome. METHODS: Human arterial samples collected during heart and vascular surgery from well-characterized patients and stored in the Odense Artery Biobank were analysed by liquid chromatography coupled with tandem mass spectrometry (LC-MS/MS). We included ascending thoracic aortas (ATA) (n = 10 (type 2 DM, T2DM) and n = 10 (non-DM)); laser capture micro-dissected plaque- and media compartments from carotid plaques (n = 10 (T2DM) and n = 9 (non-DM)); and media- and adventitia compartments from ITAs (n = 9 (T2DM) and n = 7 (non-DM)). RESULTS: We first extended our previous finding of BM accumulation in arteries from T2DM patients, as 7 of 12 pre-defined BM proteins were significantly upregulated in bulk ATAs consisting of > 90% media. Although less pronounced, BM components tended to be upregulated in the media of ITAs from T2DM patients, but not in the neighbouring adventitia. Overall, we did not detect effects on BM proteins in carotid plaques or in the plaque-associated media. Instead, complement factors, an RNA-binding protein and fibrinogens appeared to be regulated in these tissues from T2DM patients. CONCLUSION: Our results suggest that accumulation of BM proteins is a general phenomenon in the medial layer of non-atherosclerotic arteries in patients with T2DM. Moreover, we identify additional T2DM-associated effects on the arterial proteome, which requires validation in future studies.

To form and function: on the role of basement membrane mechanics in tissue development, homeostasis and disease.

The basement membrane (BM) is a special type of extracellular matrix that lines the basal side of epithelial and endothelial tissues. Functionally, the BM is important for providing physical and biochemical cues to the overlying cells, sculpting the tissue into its correct size and shape. In this review, we focus on recent studies that have unveiled the complex mechanical properties of the BM. We discuss how these properties can change during development, homeostasis and disease via different molecular mechanisms, and the subsequent impact on tissue form and function in a variety of organisms. We also explore how better characterization of BM mechanics can contribute to disease diagnosis and treatment, as well as development of better in silico and in vitro models that not only impact the fields of tissue engineering and regenerative medicine, but can also reduce the use of animals in research.

Optimal Elasticity of Biological Networks.

Reinforced elastic sheets surround us in daily life, from concrete shell buildings to biological structures such as the arthropod exoskeleton or the venation network of dicotyledonous plant leaves. Natural structures are often highly optimized through evolution and natural selection, leading to the biologically and practically relevant problem of understanding and applying the principles of their design. Inspired by the hierarchically organized scaffolding networks found in plant leaves, here we model networks of bending beams that capture the discrete and nonuniform nature of natural materials. Using the principle of maximal rigidity under natural resource constraints, we show that optimal discrete beam networks reproduce the structural features of real leaf venation. Thus, in addition to its ability to efficiently transport water and nutrients, the venation network also optimizes leaf rigidity using the same hierarchical reticulated network topology. We study the phase space of optimal mechanical networks, providing concrete guidelines for the construction of elastic structures. We implement these natural design rules by fabricating efficient, biologically inspired metamaterials.

Analysis of Thickness and Roughness Effects of Artificial Basement Membranes on Endothelial Cell Functions.

Various cells and tissues are highly organized in vivo by basement membranes (BMs) and thus promising artificial BMs (A-BMs) constructed by electrospinning and layer-by-layer (LbL) assembly have recently attracted much attention in the tissue engineering field. However, control of cell adhesion, morphology, and migration of the attached cells on the A-BMs has not been reported yet. In this study, we investigated both thickness and roughness-dependent effects of A-BMs on the functions of endothelial cells (ECs), which resulted from different assembly concentrations. The results indicated that the roughness of A-BMs increased gradually with the increase of nanofilm thickness. EC adhesion, spreading and proliferation were inhibited on thicker A-BM surfaces with larger roughness, while interendothelial junctions and the barrier effect of confluent EC monolayers on thicker A-BM surfaces were compensated by increasing seeding cell number and expanding culture time. Our study highlights the influence of LbL assembly conditions on endothelial functions, which offers a new criterion for the design of A-BMs in well-organized 3D tissues.

NC1-Peptide From Collagen α3 (IV) Chains in the Basement Membrane of Testes Regulates Spermatogenesis via p-FAK-Y407.

The blood-testis barrier (BTB) in the testis is an important ultrastructure to support spermatogenesis. This blood-tissue barrier undergoes remodeling at late stage VII to early stage IX of the epithelial cycle to support the transport of preleptotene spermatocytes across the BTB to prepare for meiosis I/II at the apical compartment through a mechanism that remains to be delineated. Studies have shown that NC1-peptide-derived collagen α3 (IV) chain in the basement membrane is a bioactive peptide that induces BTB remodeling. It also promotes the release of fully developed spermatids into the tubule lumen. Thus, this endogenously produced peptide coordinates these 2 cellular events across the seminiferous epithelium. Using an NC1-peptide complementary deoxyribonucleic acid (cDNA) construct to transfect adult rat testes for overexpression, NC1-peptide was found to effectively induce germ cell exfoliation and BTB remodeling, which was associated with a surge and activation of p-rpS6, the downstream signaling protein of mTORC1 and the concomitant downregulation of p-FAK-Y407 in the testis. In order to define the functional relationship between p-rpS6 and p-FAK-Y407 signaling to confer the ability of NC1-peptide to regulate testis function, a phosphomimetic (and thus constitutively active) mutant of p-FAK-Y407 (p-FAK-Y407E-MT) was used for its co-transfection, utilizing Sertoli cells cultured in vitro with a functional tight junction (TJ) barrier that mimicked the BTB in vivo. Overexpression of p-FAK-Y407E-MT blocked the effects of NC1-peptide to perturb Sertoli cell BTB function by promoting F-actin and microtubule cytoskeleton function, and downregulated the NC1-peptide-mediated induction of p-rpS6 activation. In brief, NC1-peptide is an important endogenously produced biomolecule that regulates BTB dynamics.

Two new reliable immunohistochemical methods for simultaneous identification of capillaries, the three types of fibers and basal lamina in human skeletal muscle.

Capillary network of skeletal muscle has a crucial role in oxygen supply and is strongly associated with the phenotype and metabolic profile of muscle fibers. Abundant literature has explored capillarization of skeletal muscle in different populations and in response to different interventions. Capillary and fiber type identification techniques have considerably evolved over the last decades, but to the best of our knowledge, no validated immunohistochemical method has yet been developed to simultaneously identify capillaries (using CD31), the three different muscle fiber types, and basal lamina. Nine human muscle biopsies of vastus lateralis were stained using 5 different methods to test: the reliability of different CD31 antibodies for capillary identification, the reliability between single-section or serial-section methods, and the intra-experimenter reproducibility in visual detection of capillaries. High reliability for the different antibodies directed against capillaries was observed for capillary contacts (CC) measurements (intra-class correlations (ICC) [ICC95%] of 0.89 [0.72; 0.96] for type I fibers, 0.93 [0.81; 0.97] for type IIA fibers, 0.88 [0.71; 0.96] for type IIX fibers, 0.95 [0.86; 0.98] for all fiber types) as well as a high level of similarity between single and serial sections methods. A strong similarity in capillary analysis between the different methods was obtained for each sample measurements. Analysis of Lin's concordance correlation coefficients and Bland and Altman's graphics showed a strong intra-experimenter reproducibility. This article proposes two time- and tissue-sparing immunohistochemical methods to accurately assess a complete fiber typing (type I, IIA, and IIX) along with muscle capillarization on a single muscle section.

Investigation of the effects of laminin present in the basal lamina of the peripheral nervous system on axon regeneration and remyelination using the nerve acellular scaffold.

This study aimed to investigate the effects of laminin (LN) located in the basal lamina, which are important components of the peripheral nervous system-extracellular matrix, on axon regeneration and remyelination. Nerve acellular scaffolds (NASs) (S-untreated) were prepared using the acellular technique. The active component LN in the NASs was blocked (S-LN- ) or upregulated (S-LN+ ); S-LN+ contained seven times more LN than did the S-untreated group. The adhesion capacity of Schwann cells (SCs) to the three types of NAS (S-untreated, S-LN- , and S-LN+ ) was assessed in vitro. Our results showed that the adhesion of SCs to the NASs was significantly reduced in the S-LN- group, whereas no difference was observed between the S-LN+ and S-untreated groups. The pretreated NASs were used to repair nerves in a nerve injury mouse model with the animals divided into four groups (S-LN- group, S-untreated group, S-LN+ group, and autograft group). Two weeks after surgery, although there was no difference in the S-LN- group, S-untreated group and S-LN+ group, the newly formed basal lamina in the S-LN- group were significantly lower than those in the other two groups. Four weeks after surgery, the S-LN+ group had higher numbers of newly generated axons and their calibers, more myelinated fibers, thicker myelin sheaths, increased myelin basic protein expression, and improved recovery of neural function compared to those of the S-LN- and S-untreated groups, but all of these parameters were significantly worse than those of the autograft group. Downregulation of the LN level in the NAS leads to a reduction in all of the above parameters.

Autoantibody Profile of a Cohort of 54 Italian Patients with Linear IgA Bullous Dermatosis: LAD-1 Denoted as a Major Auto-antigen of the Lamina Lucida Subtype.

Linear IgA bullous dermatosis (LABD) is characterized by presence of multiple IgA autoantibodies, and a comparatively lesser number of IgG antibodies, directed against different hemidesmosomal antigens. The main autoantigens are LAD-1, LABD-97, BP180 and BP230, type VII collagen and laminin 332. We retrospectively studied the serology of 54 Italian patients with LABD using enzyme-linked immunosorbent assay (ELISA), immunoblotting assay, and indirect immunofluorescence on monkey oesophagus and salt-split skin. Among these, indirect immunofluorescence of salt-split skin elicits the greatest sensitivity. Sixty-three percent of the sera were observed to be positive, with a lamina lucida pattern observed in 48%, a sub-lamina densa pattern in 2% and a mixed pattern in 13% of the cases. IgA reactivity to LAD-1 on immunoblotting was found in 52% of sera, to BP180-NC16A by ELISA in 32% and to BP230 in 26%. Only 17% of patients possessed circulating IgG autoantibodies. LAD-1 was determined to be a major autoantigen of the lamina lucida subtype. Combined serological assays demonstrated a high sensitivity (82%), suggesting that this approach could support diagnosis when a biopsy is not feasible or direct immunofluorescence results are negative.

Electron Microscopic and Immunohistochemical Findings of the Epidermal Basement Membrane in Two Families with Nail-patella Syndrome.

Nail-patella syndrome is an autosomal dominant disorder characterized by nail dysplasia and skeletal anomaly. Some patients have been shown to have ultrastructural abnormalities of the glomerular basement membrane that result in nephrosis. However, little has been reported on the epidermal basement membrane in this condition. This paper reports 2 families with nail-patella syndrome. Direct sequencing analysis of LMX1B revealed that family 1 and family 2 were heterozygous for the mutations c.140-1G>C and c.326+1G>C, respectively. To evaluate the epidermal basement membrane zone, ultrastructural and immunohistochemical analyses were performed using skin specimens obtained from the dorsal thumb. Electron microscopy showed intact hemidesmosomes, lamina lucida, lamina densa, and anchoring fibrils. Immunofluorescence studies with antibodies against components of the epidermal basement membrane zone revealed a normal expression pattern among the components, including type IV collagen. These data suggest that nail dysplasia in patients with nail-patella syndrome is not caused by structural abnormalities of the epidermal basement membrane.

Basement membrane collagens and disease mechanisms.

Basement membranes (BMs) are specialised extracellular matrix (ECM) structures and collagens are a key component required for BM function. While collagen IV is the major BM collagen, collagens VI, VII, XV, XVII and XVIII are also present. Mutations in these collagens cause rare multi-systemic diseases but these collagens have also been associated with major common diseases including stroke. Developing treatments for these conditions will require a collective effort to increase our fundamental understanding of the biology of these collagens and the mechanisms by which mutations therein cause disease. Novel insights into pathomolecular disease mechanisms and cellular responses to these mutations has been exploited to develop proof-of-concept treatment strategies in animal models. Combined, these studies have also highlighted the complexity of the disease mechanisms and the need to obtain a more complete understanding of these mechanisms. The identification of pathomolecular mechanisms of collagen mutations shared between different disorders represent an attractive prospect for treatments that may be effective across phenotypically distinct disorders.

In vitro evaluation of vascular endothelial cell behaviors on biomimetic vascular basement membranes.

Vascular basement membrane (VBM) is a thin layer of fibrous extracellular matrix linking endothelium, and collagen type IV (COL IV) is its main composition. VBM plays a crucial role in anchoring down the endothelium to its loose connective tissue underneath. For vascular grafts, constructing biomimetic VBMs on the luminal surface is thus an effective approach to improve endothelialization in situ. In the present work, three types of polycaprolactone (PCL) membranes were produced and characterized through cell counting kit-8 (CCK-8) assay, adhesion force and elastic modulus test to examine the influence of fiber diameter and membrane composition on vascular endothelial cell (EC) behaviors. The PCL membranes with finer fibers of 54.77 nm (PCL-54) could biomimic the nanotopography of VBMs more efficiently than 544.64 nm (PCL-544), and they were more suitable for Pig iliac endothelium cells (PIECs) adhesion and proliferation, meanwhile, inducing higher elastic modulus and adhesion force of PIECs. On this foundation, we further immobilized COL IV onto PCL-54 (PCL-COL IV) to biomimic VBMs compositionally. Results showed that PIECs on PCL-COL IV exhibited the highest viability and proliferation. Besides, quantitative data indicated that the elastic modulus of the PIECs on PCL-COL IV (4441.00 Pa) was as two times higher than that on PCL-54 (2312.26 Pa), and the adhesion force grew to 1120.99 pN from 673.58 pN of PIECs on PCL-54. In summary, the PCL-COL IV membranes show high similarity with the native VBMs in terms of structure and composition, suggesting a promising potential for surface modification to vascular grafts for improved endothelialization.

Extracellular matrix stiffness cues junctional remodeling for 3D tissue elongation.

Organs are sculpted by extracellular as well as cell-intrinsic forces, but how collective cell dynamics are orchestrated in response to environmental cues is poorly understood. Here we apply advanced image analysis to reveal extracellular matrix-responsive cell behaviors that drive elongation of the Drosophila follicle, a model system in which basement membrane stiffness instructs three-dimensional tissue morphogenesis. Through in toto morphometric analyses of wild type and round egg mutants, we find that neither changes in average cell shape nor oriented cell division are required for appropriate organ shape. Instead, a major element is the reorientation of elongated cells at the follicle anterior. Polarized reorientation is regulated by mechanical cues from the basement membrane, which are transduced by the Src tyrosine kinase to alter junctional E-cadherin trafficking. This mechanosensitive cellular behavior represents a conserved mechanism that can elongate edgeless tubular epithelia in a process distinct from those that elongate bounded, planar epithelia.

Analysis of protein chlorination by mass spectrometry.

Chlorination of tyrosine is a commonly known effect/consequence of myeloperoxidase activity at sites of inflammation, and detection of 3-chlorotyrosine has been used as biomarker for inflammatory diseases. However, few studies have addressed site specific chlorination in proteins, and no methods for large scale chloroproteomics studies have yet been published. In this study, we present an optimized mass spectrometry based protocol to identify and quantify chlorinated peptides from single proteins modified by HOCl (100 and 500 µM, within estimated pathophysiological levels), at a high level of sensitivity and accuracy. Particular emphasis was placed on 1) sensitive and precise detection of modification sites, 2) the avoidance of loss or artefactual creation of modifications, 3) accurate quantification of peptide abundance and reduction of missing values problem, 4) monitoring the dynamics of modification in samples exposed to different oxidant concentrations and 5) development of guidelines for verification of chlorination sites assignment. A combination of an optimised sample preparation protocol, and improved data analysis approaches have allowed identification of 33 and 15 chlorination sites in laminin and fibronectin, respectively, reported in previous manuscripts [1,2]. The method was subsequently tested on murine basement membrane extract, which contains high levels of laminin in a complex mixture. Here, 10 of the major chlorination sites in laminin were recapitulated, highlighting the utility of the method in detecting damage in complex samples.

Urea-De-Epithelialized Human Amniotic Membrane for Ocular Surface Reconstruction.

The conjunctiva is a clear tissue covering the white part of the eye and lines the back of the eyelids. Conjunctival diseases, such as symblepharon, cause inflammation, discharges, and photophobia. The treatment often requires excision of large parts of conjunctiva. Tissue engineering of conjunctival cells using human amniotic membrane (HAM) denuded of its epithelium as a basement membrane scaffold has been shown to be effective for covering conjunctival defects. However, most epithelial denudation protocols are time-consuming and expensive or compromise HAM's basement membrane structure and matrix components. We have previously described a method to de-epithelialize HAM using ice-cold urea (uHAM). In this report, we used this method to provide tissue-engineered constructs with cultivated conjunctival epithelial cells on uHAM in two patients, one with a giant conjunctival nevus and the other with a large symblepharon. Autologous conjunctival epithelial cells harvested from incisional biopsies of these two patients were cultured on the uHAM scaffold. The transplantation of tissue-engineered constructs to patients' ocular surface immediately after the removal of lesions showed successful reconstruction of the ocular surface. Postoperatively, there were neither recurrence of lesions nor epithelial defects throughout the follow-up (up to 7 and 19 months, respectively). This report highlights the translational potential of an efficient and inexpensive method to prepare de-epithelialized HAM as a basement membrane scaffold for cell-based tissue-engineered treatments of ocular surface disorders. Stem Cells Translational Medicine 2019;8:620&626.