A novel electrochemical sensor with NiSx@MoS2 composite for efficient NO2- sensing.

Excess nitrites are potentially threatening to human health, so it is urgent to develop accurate and sensitive methods. The development of sensors can provide early warning of possible hazards and alert people to protect public health. This work presents an NiSx@MoS2-composite with excellent electrochemical activity, representing a key finding for highly sensitive NO2- detection and sensor development. With the assistance of NiSx@MoS2, this electrochemical sensor has excellent quantitative detection performance. It has a wide detection range (0.0001-0.0020 mg/mL) and a low detection limit (1.863*10-5 mg/mL) for NO2-. This electrochemical sensor maintains excellent specificity among numerous interferences, and it completes the accurate detection of different real food samples. Pleasingly, the electrochemical sensor has satisfactory repeatability stability, and potential for practical applications. It would demonstrate tremendous potential in scientific dietary guidance, food safety detection and other fields.

Ti3C2 MXene/MoS2@AuNPs ternary nanocomposite for highly sensitive electrochemical detection of phoxim residues in fruits.

Phoxim, extensively utilized in agriculture as an organothiophosphate insecticide, has the potential to cause neurotoxicity and pose human health hazards. In this study, an electrochemical enzyme biosensor based on Ti3C2 MXene/MoS2@AuNPs/AChE was constructed for the sensitive detection of phoxim. The two-dimensional multilayer structure of Ti3C2 MXene provides a robust framework for MoS2, leading to an expansion of the specific surface area and effectively preventing re-stacking of Ti3C2 MXene. Additionally, the synergistic effect of self-reduced grown AuNPs with MoS2 further improves the electrical conductivity of the composites, while the robust framework provides a favorable microenvironment for immobilization of enzyme molecules. Ti3C2 MXene/MoS2@AuNPs electrochemical enzyme sensor showed a significant response to phoxim in the range of 1 × 10-13 M to 1 × 10-7 M with a detection limit of 5.29 × 10-15 M. Moreover, the sensor demonstrated excellent repeatability, reproducibility, and stability, thereby showing its promising potential for real sample detection.

Atomic vacancies of molybdenum disulfide nanoparticles stimulate mitochondrial biogenesis.

Diminished mitochondrial function underlies many rare inborn errors of energy metabolism and contributes to more common age-associated metabolic and neurodegenerative disorders. Thus, boosting mitochondrial biogenesis has been proposed as a potential therapeutic approach for these diseases; however, currently we have a limited arsenal of compounds that can stimulate mitochondrial function. In this study, we designed molybdenum disulfide (MoS2) nanoflowers with predefined atomic vacancies that are fabricated by self-assembly of individual two-dimensional MoS2 nanosheets. Treatment of mammalian cells with MoS2 nanoflowers increased mitochondrial biogenesis by induction of PGC-1α and TFAM, which resulted in increased mitochondrial DNA copy number, enhanced expression of nuclear and mitochondrial-DNA encoded genes, and increased levels of mitochondrial respiratory chain proteins. Consistent with increased mitochondrial biogenesis, treatment with MoS2 nanoflowers enhanced mitochondrial respiratory capacity and adenosine triphosphate production in multiple mammalian cell types. Taken together, this study reveals that predefined atomic vacancies in MoS2 nanoflowers stimulate mitochondrial function by upregulating the expression of genes required for mitochondrial biogenesis.

Ultrasonically assisted fabrication of electrochemical platform for tinidazole detection.

Based on sonochemistry, green synthesis methods play an important role in the development of nanomaterials. In this work, a novel chitosan modified MnMoO4/g-C3N4 (MnMoO4/g-C3N4/CHIT) was developed using ultrasonic cell disruptor (500 W, 30 kHz) for ultra-sensitive electrochemical detection of tinidazole (TNZ) in the environment. The morphology and surface properties of the synthesized MnMoO4/g-C3N4/CHIT electrode were characterized using X-ray diffraction (XRD), fourier transform infrared spectroscopy (FT-IR), scanning electron microscope (SEM) and transmission electron microscope (TEM). Cyclic voltammetry (CV) and differential pulse voltammetry (DPV) techniques were utilized to assess the electrochemical performance of TNZ. The results indicate that the electrochemical detection performance of TNZ is highly efficient, with a detection limit (LOD) of 3.78 nM, sensitivity of 1.320 µA·µM-1·cm-2, and a detection range of 0.1-200 µM. Additionally, the prepared electrode exhibits excellent selectivity, desirable anti-interference capability, and decent stability. MnMoO4/g-C3N4/CHIT can be successfully employed to detect TNZ in both the Songhua River and tap water, achieving good recovery rates within the range of 93.0 % to 106.6 %. Consequently, MnMoO4/g-C3N4/CHIT's simple synthesis might provide a new electrode for the sensitive, repeatable, and selective measurement of TNZ in real-time applications. Using the MnMoO4/g-C3N4/CHIT electrode can effectively monitor and detect the concentration of TNZ in environmental water, guiding the sewage treatment process and reducing the pollution level of antibiotics in the water environment.

Metal ion levels after metal-on-metal hip resurfacing: A single-center longitudinal study of Chinese patients.

This study aimed to investigate the long-term serum metal ion levels of patients who received metal-on-metal hip resurfacing arthroplasty (MoM HRA). We conducted a retrospective study of 99 patients (110 hips) from March 2006 to May 2017 who underwent MoM HRA. The Harris Hip Score (HHS) and the University of California at Los Angeles (UCLA) activity score were measured, and the patients underwent clinical and radiological management. Serum levels of cobalt (Co), chromium (Cr), and molybdenum (Mo) were measured using inductively coupled plasma mass spectrometry (ICPMS) at 1, 6, and 12 months, and each year follow-up after prosthesis implantation. Patients were followed up from 1 to 156 months, with a mean of 98 months. No complications occurred. Metal ion analysis revealed significantly elevated levels compared to preoperative levels. The metal ions levels increased and reached a peak after surgery, and then the levels began to decline gradually. Approximately 84-108 months after surgery, the metal ion levels increased again to approximately peak levels. Then, up to 156 months after surgery, the metal ions levels will drop approximately to preoperative levels. The serum levels of Cr in women were higher than those in men, with the difference being statistically significant. Patients with a body mass index (BMI) of ≥24.9 kg/m2 Co levels were significantly higher than those of normal-weight patients. The serum levels of metal ions showed no significant differences between the prostheses. The use of the MoM HRA was clinically effective, and the Co, Cr, and Mo levels increased significantly after HRA; however, upon long-term follow-up, serum metal ion levels tended to decrease to preoperative levels. Longer follow-up periods and larger study samples are needed to establish the long-term outcome of patients undergoing HRA with MoM bearings. Level IV, Therapeutic Study.

Investigation of red-emitting CaMoO4: Eu3+ phosphor by partitioning of substitutional PO4 3- ions via solid-state reaction method.

To investigate the impact of PO4 3- anionic groups, the trivalent europium ion-doped calcium molybdate (CaMoO3-PO4:xEu3+, where x = 0.5, 1.0, 1.5, 2.0, and 2.5 mol%) phosphors were synthesized using the solid-state reaction method. The detailed study of the phosphor materials was carried out by X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), Fourier transform infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS), optical diffuse reflectance spectroscopy (DRS), and photoluminescence (PL) spectroscopy. The XRD results indicate that the substitution of PO4 3- anion and Eu3+ dopant ion did not affect the crystal structures of the CaMoO4 phosphors. Ultraviolet-visible (UV-vis) absorption analysis revealed the change of absorption edge of both un-doped and Eu3+-doped CaMoO4-PO4 phosphors. Under the 394 nm UV-excitation, the recorded PL spectra showed an intense peak at 615 nm corresponding to the Eu3+: 5D0 → 7F2 transition. The results of the Commission Internationale de l'Eclairage (CIE) diagram reported that the color of the emissions lies in the red color zone and there is no change in the CIE coordinates of the overall emission for Eu3+-doped CaMoO4-PO4 as Eu concentration changes. Thus, these observations led to finding the best red components for white light-emitting diode applications.

[Pollution Characteristics, Source Analysis, and Health Risk Assessment of Heavy Metals in Soil and Crops in a Typical molybdenum Mining Area of Qinling Mountains].

This study focused on a molybdenum mining area in the Qinling Mountains （Shaanxi segment）. Crop and corresponding soil samples were collected from the vicinity of the mining area, and the concentrations of six heavy metals （Cr, Cu, Zn, As, Cd, and Pb） were determined. Soil heavy metal pollution was assessed using single-factor, comprehensive pollution, and geo-accumulation index methods. The primary sources of soil heavy metals were analyzed using the PMF model. A health risk assessment for soil and crops was conducted using the USEPA model. The results revealed severe pollution of agricultural soils by Cr, Cu, Zn, Cd, and Pb. Among these, Cr may have been primarily sourced from chrombismite nearby mining activities, contributing to 85.1% of the pollution. Cu and As were mainly sourced from agriculture, contributing 50.3% and 70.6%, respectively. Zn and Cd were primarily sourced from natural sources such as metal slag dust and rainwash from the mining area, contributing 73.5% and 48.7%, respectively. Pb was primarily sourced from transportation sources, contributing to 54.7% of the pollution. Crop metal contamination was especially severe for Cr, followed by Pb, whereas As and Cd contamination was relatively lower. Crops were significantly impacted by heavy metal pollution in agricultural soils. The health risk assessment indicated non-carcinogenic and carcinogenic risks for children due to soil heavy metals, whereas adults faced acceptable levels of risk. Both adults and children were exposed to highly significant non-carcinogenic and carcinogenic risks from heavy metals in the crops. Moreover, it is essential to implement effective measures to control heavy metal pollution from tailings to safeguard nearby residents, especially children, from adverse health risks.

Phytoremediation of molybdenum (Mo)-contaminated soil using plant and humic substance.

The severity of soil molybdenum (Mo) pollution is increasing, and effective management of contaminated soil is essential for the sustainable development of soil. To investigate this, a pot experiment was carried out to assess the impact of different rates of humic acid (HA) and fulvic acid (FA) on the mobility of Mo in soil solution and its uptake by alfalfa, wheat and green bristlegrass. The concentration of Mo in Plants and soil was determined using an Atomic Absorption Spectrophotometer. The findings revealed that the application of HA led to an increase in Mo accumulation in the shoot and root of green bristlegrass and wheat, ranging from 10.56 % to 28.73 % and 62.15-115.79 % (shoot), and 17.52-46.53 % and 6.29-81.25 % (root), respectively. Nonetheless, the use of HA resulted in a slight inhibition of plant Mo uptake, leading to reduced Mo accumulation in alfalfa roots compared to the control treatment (from 3284.49 mg/kg to 2140.78-2813.54 mg/kg). On the other hand, the application of FA decreased Mo accumulation in the wheat shoot (from 909.92 mg/kg to 338.54-837.45 mg/kg). Furthermore, the bioavailability of green bristlegrass (with HA) and wheat (with FA) decreased, and the percentage of residual fraction of Mo increased (from 0.39 % to 0.78-0.96 %, from 3.95 % to 3.97∼ 4.34 %). This study aims to elucidate the ternary interaction among Mo, humic substances, and plants (alfalfa, wheat, and green bristlegrass), to enhance both the activation and hyperaccumulation of Mo simultaneously.

Quantum Confinement and End-Sealing Effects for Highly Sensitive and Stable Nitrogen Dioxide Detection: Homogeneous Integration of Ti3C2Tx-Based Flexible Gas Sensors.

The real-time and room-temperature detection of nitrogen dioxide (NO2) holds significant importance for environmental monitoring. However, the performance of NO2 sensors has been hampered by the trade-off between the high sensitivity and stability of conventional sensitive materials. Here, we present a novel fully flexible paper-based gas sensing structure by combining a homogeneous screen-printed titanium carbide (Ti3C2Tx) MXene-based nonmetallic electrode with a MoS2 quantum dots/Ti3C2Tx (MoS2 QDs/Ti3C2Tx) gas-sensing film. These precisely designed gas sensors demonstrate an improved response value (16.3% at 5 ppm) and a low theoretical detection limit of 12.1 ppb toward NO2, which exhibit a remarkable 3.5-fold increase in sensitivity compared to conventional Au interdigital electrodes. The outstanding performance can be attributed to the integration of the quantum confinement effect of MoS2 QDs and the conductivity of Ti3C2Tx, establishing the main active adsorption sites and enhanced charge transport pathways. Furthermore, an end-sealing effect strategy was applied to decorate the defect sites with naturally oxygen-rich tannic acid and conductive polymer, and the formed hydrogen bonding network at the interface effectively mitigated the oxidative degradation of the Ti3C2Tx-based gas sensors. The exceptional stability has been achieved with only a 1.8% decrease in response over 4 weeks. This work highlights the innovative design of high-performance gas sensing materials and homogeneous gas sensor techniques.

MoS2_CNTs_aerogel-based PEDOT nanocomposite electrochemical sensor for simultaneous detection of chloramphenicol and furazolidone in food samples.

Toxic intermediates in food caused by chloramphenicol (CP) and furazolidone (FZ) have gained interest in research toward their detection. Hence, fast, reliable, and accurate detection of CP and FZ in food products is of utmost importance. Here, a novel molybdenum disulfide-connected carbon nanotube aerogel/poly (3,4-ethylenedioxythiophene) [MoS2/CNTs aerogel/PEDOT] nanocomposite materials are constructed and deposited on the pretreated carbon paste electrode (PCPE) by a facile eletropolymerization method. The characterization of MoS2/CNTs aerogel/PEDOT nanocomposite was analyzed by scanning electron microscopy (SEM), cyclic voltammetry, and differential pulse voltammetry. The modified MoS2/CNTs aerogel/PEDOT nanocomposite has improved sensing characteristics for detecting CP and FZ in PBS solution. For this work, we have studied various parameters like electrocatalytic activity, the effect of scan rates, pH variation studies, and concentration variation studies. Under optimum conditions, the modified electrode exhibited superior sensing ability compared to the bare and pretreated CPE. This improvement in electrocatalytic activity can be the higher conductivity, larger surface area, increased heterogeneous rate constant, and presence of more active sites in the MoS2/CNTs aerogel/PEDOT nanocomposite. The modified electrode demonstrated distinct electrochemical sensing toward the individual and simultaneous analysis of CP and FZ with a high sensitivity of 0.701 µA. µM-1 .cm-2 for CP and 0.787 µA. µM-1 .cm-2 for FZ and a low detection limit of 3.74 nM for CP and 3.83 nM for FZ with good reproducibility, repeatability, and interferences. Additionally, the prepared sensor effectively detects CP and FZ in food samples (honey and milk) with an acceptable recovery range and a relative standard deviation below 4%.

Hive-shaped carbon nanotubes coated with MoSe2as an electrochemical sensor for cholesterol.

The study utilized transition metal chalcogenide, molybdenum diselenide (MoSe2), for application in the field of bioelectrochemical sensing. The MoSe2was combined with carbon nanotubes (CNTs) by chemical vapor deposition to enhance the specific surface area and improve the detection sensitivity. To further increase the contact area between the electrolyte and the electrode, photolithography techniques were employed to fabricate hive-shaped CNTs, thereby enhancing the specific surface area. Next, cholesterol oxidase (ChOx) was coated onto the electrode material, creating a cholesterol biosensor. Cyclic voltammetry was utilized to detect the concentration of cholesterol. The experiment involved segmented testing for cholesterol concentrations ranging from 0µM to 10 mM. Excellent sensitivity, low detection limits, and high accuracy were achieved. In the cholesterol concentration range of 0µM-100µM, the experiment achieved the highest sensitivity of 4.44µAµM⋅cm-2. Consequently, all data indicated that ChOx/MoSe2/CNTs functioned as an excellent cholesterol sensor in the study.

Rice straw waste-based green synthesis and characterizations investigation of Fe-MoS2-derived nanohybrid.

In present work, synthesis of a nanohybrid material using Fe and MoS2 has been performed via a cost-effective and environmentally friendly route for sustainable manufacturing innovation. Rice straw extract was prepared and used as a reducing and chelating agent to synthesize the nanohybrid material by mixing it with molybdenum disulfide (MoS2) and ferric nitrate [Fe (NO3)3.9H2O], followed by heating and calcination. The X-ray diffraction (XRD) pattern confirms the formation of a nanohybrid consisting of monoclinic Fe2(MoO4)3, cubic Fe2.957O4, and orthorhombic FeS with 86% consisting of Fe2(MoO4)3. The properties were analyzed through Fourier-transformed infrared spectroscopy (FTIR), atomic force microscopy (AFM), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The results of the dynamic light scattering (DLS) study revealed a heterogeneous size distribution, with an average particle size of 48.42 nm for 18% of particles and 384.54 nm for 82% of particles. Additionally, the zeta potential was measured to be -18.88 mV, suggesting moderate stability. X-ray photoelectron spectroscopy (XPS) results confirmed the presence of both Fe2+ and Fe3+ oxidation states along with the presence of Molybdenum (Mo), oxygen (O), and Sulphur (S). The prepared nanohybrid material exhibited a band gap of 2.95 eV, and the photoluminescence intensity increased almost twice that of bare MoS2. The present work holds potential applications in photo luminescent nanoplatform for biomedical applications.

Nitrogen-doped MoS2 QDs as fluorescent probes for sensitive detection of curcumin and cell imaging.

BACKGROUND: Curcumin has been used in traditional medicine because of its pharmacological activity, including antioxidant, antibacterial, anticancer, and anticarcinogenic properties. Therefore, sensitive and selective monitoring of curcumin is highly demand for practical application. RESULTS: In this study, we describe the construction of a fluorescence method for curcumin assay based on nitrogen-doped MoS2 quantum dots (N-MoS2 QDs). The N-MoS2 QDs are constructed by a solvothermal method using sodium molybdate and Cys as precursors. With the addition of curcumin, the bright blue fluorescence of N-MoS2 QDs is quenched by the inner filter effect (IFE). The QDs emitted bright blue fluorescence and could be quenched by the addition of curcumin via IFE. The dynamic range is the range of 0.1-10 µM for curcumin detection, with a detection limit of 59 nM. N-MoS2 QDs were applied for curcumin assay in real samples with good recovery. In addition, the N-MoS2 QDs exhibited relative low cytotoxicity and could be applied for fluorescence-based imaging in biological samples. SIGNIFICANCE: Our study indicates that the sensor possesses good selectivity to monitor curcumin in water samples, human urine samples, ginger powder samples, mustard samples, and curry samples with satisfactory recoveries. The N-MoS2 QDs possess less cytotoxicity with excellent biocompatibility and were applied for in vitro cell imaging.

Molybdenum Nanoparticles Alleviate MC903-Induced Atopic Dermatitis-Like Symptoms in Mice by Modulating the ROS-Mediated NF-κB and Nrf2 /HO-1 Signaling Pathways.

Purpose: Atopic dermatitis (AD) is a chronic inflammatory skin condition that can affect individuals of all ages. Recent research has shown that oxidative stress plays a crucial role in the development of AD. Therefore, inhibiting oxidative stress may be an effective therapeutic approach for AD. Nano-molybdenum is a promising material for use as an antioxidant. We aimed to evaluate the therapeutic effects and preliminary mechanisms of molybdenum nanoparticles (Mo NPs) by using a murine model of chemically induced AD-like disease. Methods: HaCaT cells, a spontaneously immortalized human keratinocyte cell line, were stimulated by tumor necrosis factor-alpha /interferon-gamma after pre-treatment with Mo NPs. Reactive oxygen species levels, production of inflammatory factors, and activation of the nuclear factor kappa-B and the nuclear factor erythroid 2-related factor pathways were then evaluated. Mo NPs was topically applied to treat a murine model of AD-like disease induced by MC903, a vitamin D3 analog. Dermatitis scores, pruritus scores, transepidermal water loss and body weight were evaluated. AD-related inflammatory factors and chemokines were evaluated. Activation of the nuclear factor kappa-B and nuclear factor erythroid 2-related factor / heme oxygenase-1 pathways was assessed. Results: Our data showed that the topical application of Mo NPs dispersion could significantly alleviate AD skin lesions and itching and promote skin barrier repair. Further mechanistic experiments revealed that Mo NPs could inhibit the excessive activation of the nuclear factor kappa-B pathway, promote the expression of nuclear factor erythroid 2-related factor and heme oxygenase-1 proteins, and suppress oxidative stress reactions. Additionally, they inhibited the expression of thymic stromal lymphopoietin, inflammatory factors, and chemokines, thereby alleviating skin inflammation. Conclusion: Mo NPs present a promising alternative treatment option for patients with AD as they could address three pivotal mechanisms in the pathogenesis of AD concurrently.

Two-dimensional Graphene/MoS2 vertical heterostructure for detection of hemoglobin concentration in blood samples.

This study demonstrates the use of computational methods to simulate the molecular dynamics involved in hemoglobin concentration sensing, utilizing Material Studio and the TCAD Silvaco device simulator. A non-invasive and flexible Graphene/MoS2 heterostructure has been proposed for sensing hemoglobin concentration in blood samples. The findings reveal a notable shift in the wavelength-dependent refractive index and extinction coefficient, as well as significant changes in the absorption coefficient and reflectivity of the Graphene/MoS2 heterostructure in response to different hemoglobin concentrations, specifically within an approximate range of 0.3 µm to 1 µm. Moreover, the spectral response of the heterostructure demonstrates that at a particular wavelength of approximately 600 nm, a maximum response is obtained. This wavelength can be considered optimal for detecting various levels of hemoglobin using this heterostructure. The anticipated outcome is a comprehensive understanding of the fundamental principles, ultimately resulting in the development of an exceptionally sensitive platform for detecting hemoglobin concentration.

Ultrahigh-resolution imaging of biogenic phosphorus and molybdenum in palaeoproterozoic gunflint microfossils.

Phosphorus and molybdenum play important roles in the formation of microbial cell structures and specific enzymes crucial for metabolic processes. Nevertheless, questions remain about the preservation of these elements within ancient microfossils. Here, we present shape-accurate ion images capturing phosphorus and molybdenum on Palaeoproterozoic filamentous microfossils by pioneering a methodology using lateral high-resolution secondary ion mass spectrometry. Introducing electrically conductive glass for mounting isolated microfossils facilitated clearer observations with increased secondary ion yields. Phosphorus was detected along the contours of microfossils, providing direct evidence of phospholipid utilization in the cell membrane. Trace amounts of molybdenum were detected within microfossil bodies, suggesting potential remnants of molybdenum-bearing proteins, such as nitrogenase. These findings align with the hypothesized cyanobacterial origin of filamentous gunflint microfossils. Our methodology introduces a groundbreaking tool for obtaining crucial insights into the cellular evolution and metabolic pathways of microorganisms, allowing comparisons of their morphological characteristics.

Hydrogel Capacitors Based on MoS2 Nanosheets and Applications in Glucose Monitoring.

Non-invasive/minimally invasive continuous monitoring of blood glucose and blood glucose administration have a high impact on chronic disease management in diabetic patients, but the existing technology is yet to achieve the above two purposes at the same time. Therefore, this study proposes a microfluidic microneedle patch based on 3D printing technology and an integrated control system design for blood glucose measurement, and a drug delivery control circuit based on a 555 chip. The proposed method provides an improved preparation of a PVA-PEG-MoS2 nanosheet hydrogel, making use of its dielectric properties to fabricate a microcapacitor and then embedding it in a microfluidic chip. When MoS2 nanosheets react with interstitial liquid glucose (and during the calibration process), the permittivity of the hydrogel is changed, resulting in changes in the capacitance of the capacitor. By converting the capacitance change into the square-wave period change in the output of the 555 chip with the control circuit design accordingly, the minimally invasive continuous measurement of blood glucose and the controlled release of hypoglycemic drugs are realized. In this study, the cross-linking structure of MoS2 nanosheets in hydrogel was examined using infrared spectroscopy and scanning electron microscopy (SEM) methods. Moreover, the critical doping mass fraction of MoS2 nanosheets was determined to be 2% via the measurement of the dielectric constant. Meanwhile, the circuit design and the relationship between the pulse cycle and glucose concentration is validated. The results show that, compared with capacitors in series, the microcapacitors embedded in microfluidic channels can be connected in parallel to obtain better linearized blood glucose measurement results.

The Final Step in Molybdenum Cofactor Biosynthesis-A Historical View.

Molybdenum (Mo) is an essential micronutrient across all kingdoms of life, where it functions as a key component of the active centers of molybdenum-dependent enzymes. For these enzymes to gain catalytic activity, Mo must be complexed with a pterin scaffold to form the molybdenum cofactor (Moco). The final step of Moco biosynthesis is catalyzed by the enzyme Mo-insertase. This review focuses on eukaryotic Mo-insertases, with an emphasis on those found in plants and mammals, which have been instrumental in advancing the understanding of Mo biochemistry. Additionally, a historical perspective is provided, tracing the discovery of Mo-insertase from the early 1960s to the detailed characterization of its reaction mechanism in 2021. This review also highlights key milestones in the study of Mo-insertase, including mutant characterization, gene cloning, structural elucidation at the atomic level, functional domain assignment, and the spatial organization of the enzyme within cellular protein networks.

Near-infrared light-enhanced colorimetric signal amplification strategy for tumor marker detection based on MoS2/CuO/Au nanocomposite.

A novel signal amplification strategy was developed by combining near-infrared light with MoS2/CuO/Au nanocomposite for building a colorimetric immunoassay. First, MoS2/CuO/Au nanocomposite was synthesized by precipitation and photoreduction methods and characterized by scanning electron microscopy (SEM) and X-ray powder diffraction (XRD). MoS2/CuO/Au nanocomposite has oxidase-like activity and can oxidize TMB to form a blue product (TMBox). Further, the catalytic oxidation of TMB was accelerated under near-infrared (NIR) laser radiation. The sandwich-type colorimetric immunoassay was constructed using MoS2/CuO/Au nanocomposite. Under the enhancement of near-infrared light, carcinoembryonic antigen (CEA) was sensitively detected in the range 0.1 to 40 ng/mL with the limit of detection of 0.03 ng/mL. Moreover, the immunosensor has excellent selectivity and anti-interference, good repeatability, and stability.

Synergistic enhancement of fluorescein-K3[Fe(CN)6] CL by MoO3-x NPs for sensitive and noninvasive detection of uric acid in saliva.

MoO3-x NPs was rapidly synthesized at room temperature by an easy stirring method. It was interesting to find that MoO3-x NPs induce OH- to generate active free radicals (ROS), which is a highly promising property in chemiluminescence (CL). Benefiting from the abundant oxygen vacancy, MoO3-x NPs adsorbs H2O2 and turn it into ·OH. The oxidase activity of fluorescein under visible light had already been reported, which catalyzes dissolved oxygen to become O2-· and continue to convert to H2O2. By creating the synergy effect with fluorescein, MoO3-x NPs strengthen the CL intensity of K3[Fe(CN)6]-fluorescein system significantly. Utilizing the quench effect of uric acid for the CL intensity, we developed a rapid, simple, and highly sensitive CL platform for uric acid detection. The linear range was 5-80 µM and the detection limit (LOD) for uric acid was 3.11 µM (S/N = 3). This work expanded the application of MoO3-x NPs in the CL field and developed a simple and highly sensitive CL sensing system to detect UA in human saliva.