Morphological and pomological assessments of seedling-originated walnut (Juglans regia L.) trees to select the promising late-leafing genotypes.

BACKGROUND: In many parts of the world, including Iran, walnut (Juglans regia L.) production is limited by late-spring frosts. Therefore, the use of late-leafing walnuts in areas with late-spring frost is the most important method to improve yield. In the present study, the phenotypic diversity of 141 seedling genotypes of walnut available in the Senejan area, Arak region, Markazi province, Iran was studied based on morphological traits to obtain superior late-leafing genotypes in the cropping seasons of 2022 and 2023. RESULTS: Based on the results of the analysis of variance, the studied genotypes showed a significant variation in terms of most of the studied morphological and pomological traits. Therefore, it is possible to choose genotypes for different values ​​of a trait. Kernel weight showed positive and significant correlations with leaf length (r = 0.32), leaf width (r = 0.33), petiole length (r = 0.26), terminal leaflet length (r = 0.34), terminal leaflet width (r = 0.21), nut length (r = 0.48), nut width (r = 0.73), nut weight (r = 0.83), kernel length (r = 0.64), and kernel width (r = 0.89). The 46 out of 141 studied genotypes were late-leafing and were analyzed separately. Among late-leafing genotypes, the length of the nut was in the range of 29.33-48.50 mm, the width of the nut was in the range of 27.51-39.89 mm, and nut weight was in the range of 8.18-16.06 g. The thickness of shell was in the range of 1.11-2.60 mm. Also, kernel length ranged from 21.97-34.84 mm, kernel width ranged from 21.10-31.09 mm, and kernel weight ranged from 3.10-7.97 g. CONCLUSIONS: Based on important and commercial traits in walnut breeding programs, such as nut weight, kernel weight, kernel percentage, kernel color, and ease of kernel removal from nuts, 15 genotypes, including no. 92, 91, 31, 38, 33, 18, 93, 3, 58, 108, 16, 70, 15, 82, and 32 were superior and could be used in walnut breeding programs in line with the introduction of new cultivars and the revival of traditional walnut orchards to commercialize them.

Mesocarp of Brazil nut (Bertholletia excelsa) as inspiration for new impact resistant materials.

Aiming to produce bioinspired impact and puncture resistant materials, the mesocarp of the Brazil nut (Bertholletia excelsa) was characterized. The mesocarp composition was investigated by chemical extraction and its microstructure was analyzed by optical microscopy and microtomography (microCT). A compression test evaluated the force needed to open the mesocarp shell. Shore D hardness testing and nanoindentation measured the local mechanical properties at different length scales. Brazil nut mesocarp has a higher content of lignin (56%) than other nutshells and is mainly composed of sclereids and fibers cells arranged together and not in separated layers as usually found in nature. The mesocarp has an internal and external layer with fibers oriented from peduncle to opercular opening and a middle layer where entangled fibers are latitudinally oriented. To open a Brazil nut mesocarp, compression forces of 10 079 ± 1460 N (parallel to latitudinal section) and 14 785 ± 4050 N (perpendicular to latitudinal section) are needed. Such forces are higher than the forces needed to open most nutshells, if fracture force is normalized by shell thickness. The Shore D hardness test showed that hardness is uniform in the mesocarp, although it is higher in the center of the thickness than close to the inner or outer surface. The cell wall of fibers has a higher reduced modulus than the cell wall of sclereids although they have a similar hardness. These microstructural and mechanical results indicate that Brazil nutshell has great potential as a source for bioinspiration and motivates further studies.

Analysis of genetic diversity and structure in a worldwide walnut (Juglans regia L.) germplasm using SSR markers.

Persian or English walnut (Juglans regia L.), the walnut species cultivated for nut production, is one of the oldest food sources known and is grown worldwide in temperate areas. France is the 7th leading producer as of 2016 with 39 kt. Deciphering walnut genetic diversity and structure is important for efficient management and use of genetic resources. In this work, 253 worldwide accessions from the INRA walnut germplasm collection, containing English walnut and several related species, were genotyped using 13 SSR (Single Sequence Repeat) markers selected from the literature to assess diversity and structure. Genetic diversity parameters showed a deficiency of heterozygotes and, for several SSRs, allele-specificities among the accessions tested. Principal Coordinate Analysis (PCoA) showed the 253 accessions clustered in largely in agreement with the existing botanical classification of the genus. Among the 217 J. regia accessions, two main clusters, accessions from Eastern Europe and Asia, and accessions from Western Europe and America, were identified using STRUCTURE software. This was confirmed by Principal Coordinate Analysis and supported by Neighbor-Joining tree construction using DARwin software. Moreover, a substructure was found within the two clusters, mainly according to geographical origin. A core collection containing 50 accessions was selected using the maximum length sub-tree method and prior knowledge about their phenotype. The present study constitutes a preliminary population genetics overview of INRA walnut genetic resources collection using SSR markers. The resulting estimations of genetic diversity and structure are useful for germplasm management and for future walnut breeding programs.

Population Differentiation in Common Walnut (Juglans regia L.) across Major Parts of Its Native Range-Insights from Molecular and Morphometric Data.

Juglans regia is an economically highly important species for fruit and wood production in the warm temperate and subtropical zones of the Northern Hemisphere. Besides the natural influence of climatic and geomorphological barriers, its genetic structure has been strongly modified by humans and the population history is still unclear. For this reason, we investigated mainly natural walnut populations across the Eurasian continent on a molecular (44 populations, 581 trees) and morphometric level (23 populations, 1391 ripe nuts). Population genetic diversity and differentiation were examined by using 7 microsatellite loci. Morphometric characteristics of the nuts (mainly roundness index and nut density) were used to estimate trait variation and population differentiation. Highest allelic richness Rs12 = 7.05 was observed in a Pakistani and the lowest value Rs12 = 3.04 in a Kyrgyz population. The genetic differentiation among populations was high (FST = 0.217; RST = 0.530) indicating a strong phylogeographic pattern. While variation of the roundness index within single populations was high, this trait neither differentiated geographical regions nor was it associated to genetic clusters. Approximated QST based on this trait equalled FST, while approximated QST based on nut density considerably exceeded FST, indicating selection. Nut density was moderately correlated with altitude, latitude, and longitude, and differentiated populations according to their origin. Pakistani and Indian populations showed highest nut densities. These South Asian populations contain putatively ancestral nut forms, which probably have been lost in other populations as a consequence of human selection.

Functional gradients in the pericarp of the green coconut inspire asymmetric fibre-composites with improved impact strength, and preserved flexural and tensile properties.

Here we investigate the mechanical properties and structural design of the pericarp of the green coconut (Cocos nucifera L.). The pericarp showed excellent impact characteristics, and mechanical tests of its individual components revealed gradients in stiffness, strength and elongation at break from the outer to the inner layer of the pericarp. In order to understand more about the potential effect of such gradients on 'bulk' material properties, we designed simple, graded, cellulose fibre-reinforced polylactide (PLA) composites by stacking layers reinforced with fibres of different mechanical properties. Tensile properties of the graded composites were largely determined by the 'weakest' fibre, irrespective of the fibre distribution. However, a graded design led to pronounced asymmetric bending and impact properties. Bio-inspired, asymmetrically graded composites showed a flexural strength and modulus comparable to that of the strongest reference samples, but the elongation at maximum load was dependent on the specimen orientation. The impact strength of the graded composites showed a similar orientation-dependence, and peak values exceeded the impact strength of a non-graded reference composite containing identical fibre fractions by up to a factor of three. In combination, our results show that an asymmetric, systematic variation of fibre properties can successfully combine desirable properties of different fibre types, suggesting new routes for the development of high-performance composites, and improving our understanding of the structure-function relationship of the coconut pericarp.

Detection of Food Allergens by Taqman Real-Time PCR Methodology.

Real-time PCR (polymerase chain reaction) has shown to be a very effective technology for the detection of food allergens. The protocol described herein consists on a real-time PCR assay targeting the plant ITS (Internal Transcribed Spacer) region, using species-specific primers and hydrolysis probes (Taqman) dual labeled with a reporter fluorophore at the 5' end (6-carboxyfluorescein, FAM) and a quencher fluorophore at the 3' end (Blackberry, BBQ). The species-specific real-time PCR systems (primers/probe) described in this work allowed the detection of different nuts (peanut, hazelnut, pistachio, almond, cashew, macadamia, walnut and pecan), common allergens present in commercial food products, with a detection limit of 0.1 mg/kg.

Thermogravimetric characterization and gasification of pecan nut shells.

This study focuses on the evaluation of pecan nut shells as an alternative source of energy through pyrolysis and gasification. The physicochemical characteristics of the selected biomass that can influence the process efficiency, consumption rates, and the product yield, as well as create operational problems, were determined. In addition, the thermal decomposition kinetics necessary for prediction of consumption rates and yields were determined. Finally, the performance of a downdraft gasifier fed with pecan nut shells was analyzed in terms of process efficiency and exit gas characteristics. It was found that the pyrolytic decomposition of the nut shells can be modeled adequately using a single equation considering two independent parallel reactions. The performance of the gasification process can be influenced by the particle size and air flow rate, requiring a proper combination of these parameters for reliable operation and production of a valuable syngas.

Causes of variation in biotic interaction strength and phenotypic selection along an altitudinal gradient.

Understanding the causes of variation in biotic interaction strength and phenotypic selection remains one of the outstanding goals of evolutionary ecology. Here we examine the variation in strength of interactions between two seed predators, common crossbills (Loxia curvirostra) and European red squirrels (Sciurus vulgaris), and mountain pine (Pinus uncinata) at and below tree limit in the Pyrenees, and how this translates into phenotypic selection. Seed predation by crossbills increased whereas seed predation by squirrels decreased with increasing elevation and as the canopy became more open. Overall, seed predation by crossbills averaged about twice that by squirrels, and the intensity of selection exerted by crossbills averaged between 2.6 and 7.5 times greater than by squirrels. The higher levels of seed predation by crossbills than squirrels were related to the relatively open nature of most of the forests, and the higher intensity of selection exerted by crossbills resulted from their higher levels of seed predation. However, most of the differences in selection intensity between crossbills and squirrels were the result of habitat features having a greater effect on the foraging behavior of squirrels than of crossbills, causing selection to be much lower for squirrels than for crossbills.

Characteristics of in-shell Brazil nuts and their relationship to aflatoxin contamination: criteria for sorting.

External characteristics of in-shell Brazil nuts were evaluated for dimensions (length and face width), weight, chromaticity, and shell thickness. The internal characteristics evaluated were moisture content (mc), aflatoxin contamination (analyzed by LC-MS/MS), and shell/nut ratio. According to their length, Brazil nuts were classified in three groups: I, II, and III, corresponding to large, medium, and small sizes, respectively. It was possible to establish the following parameters as standards for normal/healthy nuts: length (53.2, 43.9, and 36.6 mm), weight (12.9, 8.8, and 6.3 g), and shell chromaticity components (L*, 38.3, 39.5, and 41.6; a*, 8.0, 7.9, and 7.8; and b*, 17.6, 18.0, and 18.7), for the three groups, respectively. The mean of shell thicknesses were 1.92 and 2.68 mm taken from each face and nut top. The nuts, classified as small (Group III), presented aflatoxin B1 contamination at a level of 5.62 microg/kg. The Groups shell/nut ratios were 1.2, 1.2, and 1.3 for normal whole and healthy nuts. No aflatoxin was detected in Groups I and II. The data obtained from the Brazil nut measured characteristics can help to distinguish healthy/safe and deteriorated nuts and will be useful for Brazil nut sorting and machine development.

Nutlet morphology and anatomy of the genus Lycopus (Lamiaceae: Mentheae).

Nutlet morphology and pericarp structure of 16 species in the genus Lycopus were studied by light microscopy (LM) and scanning electron microscopy (SEM), and a detailed description of nutlet morphological features for all examined taxa is provided. The nutlets of all taxa in the genus Lycopus are well adapted to typical hydrochory (or nautochory) with an air-filled pericarp, and myxocarpy was not at all found. It is noteworthy that the nutlet morphology (in particular the shape of corky crests and corky ring and the distribution of glandular trichomes) and pericarp anatomy of Lycopus are unique and are well distinguished from the other genera in the tribe Mentheae. We also found some groups of the species within the genus Lycopus by the present nutlet morphological and anatomical data that appear to be useful as diagnostic characteristics for delineation purposes at the specific/interspecific levels. The earlier infrageneric classification for the genus Lycopus is, however, not well supported by the present results. In addition, the systematic and biological implications of the nutlet characteristics investigated are briefly discussed.