Unraveling the Biophysical Mechanisms of How Antiviral Detergents Disrupt Supported Lipid Membranes: Toward Replacing Triton X-100.

Triton X-100 (TX-100) is a membrane-disrupting detergent that is widely used to inactivate membrane-enveloped viral pathogens, yet is being phased out due to environmental safety concerns. Intense efforts are underway to discover regulatory acceptable detergents to replace TX-100, but there is scarce mechanistic understanding about how these other detergents disrupt phospholipid membranes and hence which ones are suitable to replace TX-100 from a biophysical interaction perspective. Herein, using the quartz crystal microbalance-dissipation (QCM-D) and electrochemical impedance spectroscopy (EIS) techniques in combination with supported lipid membrane platforms, we characterized the membrane-disruptive properties of a panel of TX-100 replacement candidates with varying antiviral activities and identified two distinct classes of membrane-interacting detergents with different critical micelle concentration (CMC) dependencies and biophysical mechanisms. While all tested detergents formed micelles, only a subset of the detergents caused CMC-dependent membrane solubilization similarly to that of TX-100, whereas other detergents adsorbed irreversibly to lipid membrane interfaces in a CMC-independent manner. We compared these biophysical results to virus inactivation data, which led us to identify that certain membrane-interaction profiles contribute to greater antiviral activity and such insights can help with the discovery and validation of antiviral detergents to replace TX-100.

Decellularized tissue exhibits large differences of extracellular matrix properties dependent on decellularization method: novel insights from a standardized characterization on skeletal muscle.

Decellularized matrices are an attractive choice of scaffold in regenerative medicine as they can provide the necessary extracellular matrix (ECM) components, signals and mechanical properties. Various detergent-based protocols have already been proposed for decellularization of skeletal muscle tissue. However, a proper comparison is difficult due to differences in species, muscle origin and sample sizes. Moreover, a thorough evaluation of the remaining acellular matrix is often lacking. We compared an in-house developed decellularization protocol to four previously published methods in a standardized manner. Porcine skeletal muscle samples with uniform thickness were subjected to in-depth histological, ultrastructural, biochemical and biomechanical analysis. In addition, 2D and three-dimensional cytocompatibility experiments were performed. We found that the decellularization methods had a differential effect on the properties of the resulting acellular matrices. Sodium deoxycholate combined with deoxyribonuclease I was not an effective method for decellularizing thick skeletal muscle tissue. Triton X-100 in combination with trypsin, on the other hand, removed nuclear material but not cytoplasmic proteins at low concentrations. Moreover, it led to significant alterations in the biomechanical properties. Finally, sodium dodecyl sulphate (SDS) seemed most promising, resulting in a drastic decrease in DNA content without major effects on the ECM composition and biomechanical properties. Moreover, cell attachment and metabolic activity were also found to be the highest on samples decellularized with SDS. Through a newly proposed standardized analysis, we provide a comprehensive understanding of the impact of different decellularizing agents on the structure and composition of skeletal muscle. Evaluation of nuclear content as well as ECM composition, biomechanical properties and cell growth are important parameters to assess. SDS comes forward as a detergent with the best balance between all measured parameters and holds the most promise for decellularization of skeletal muscle tissue.

The effect of emulsifier type and oil inclusion on stress-related gene expression of Salmonella typhimurium in oil-in-water emulsion.

Salmonella has been associated with numerous outbreaks from contaminated food products, including emulsions. Emulsions are influenced by emulsifier type and oil presence, which can have varying degrees of stress or protection on bacteria. Although our previous research has shown that emulsifier solutions, rather than emulsions, provide a protective effect on Salmonella typhimurium after thermal treatment, the underlying mechanism remains unclear. This study selected S. typhimurium as the model microorganism and utilized the same emulsifiers (Tween 20, Tween 80, Triton X-100) to create emulsifier solutions and emulsions with the same oil fraction (60% (v/v)) to examine their effect on the expression of nine selected genes (rpoE, rpoH, otsB, proV, fadA, fabA, dnaK, ibpA, ompC) associated with stress response. Specifically, the study observed variations in gene expression under normal and thermal stress at 55°C. After 20-h incubation, Triton X-100 emulsion caused an upregulation of stress-related genes, rpoE, otsB, and fabA, suggesting stressful environment. After thermal treatment, S. typhimurium in Triton X-100 solution showed a longer 5-log reduction time with increased proV and decreased fabA and ompC expression, suggesting enhanced thermal protection compared to its emulsion. Conversely, Tween 80 solution increased fabA and ompC expression, indicating greater membrane fluidity and passive diffusion, potentially reducing thermal resistance. However, according to the upregulation of ibpA, this effect was likely mitigated by the overproduction of heat shock proteins. Notably, Triton X-100 environments exhibited the most significant gene expression changes after heat treatment, whereas Tween 80 without oil was the most inhospitable for bacterial survival. These findings inform bacterial responses under various conditions, aiding food safety strategies.

Phospholipid cofactor solubilization inhibits formation of native prions.

Cofactor molecules are required to generate infectious mammalian prions in vitro. Mouse and hamster prions appear to have different cofactor preferences: Whereas both mouse and hamster prions can use phosphatidylethanolamine (PE) as a prion cofactor, only hamster prions can also use single-stranded RNA as an alternative cofactor. Here, we investigated the effect of detergent solubilization on rodent prion formation in vitro. We discovered that detergents that can solubilize PE (n-octylglucoside, n-octylgalactoside, and CHAPS) inhibit mouse prion formation in serial protein misfolding cyclic amplification (sPMCA) reactions using bank vole brain homogenate substrate, whereas detergents that are unable to solubilize PE (Triton X-100 and IPEGAL) have no effect. For all three PE-solubilizing detergents, inhibition of RML mouse prion formation was only observed above the critical micellar concentration (CMC). Two other mouse prion strains, Me7 and 301C, were also inhibited by the three PE-solubilizing detergents but not by Triton X-100 or IPEGAL. In contrast, none of the detergents inhibited hamster prion formation in parallel sPMCA reactions using the same bank vole brain homogenate substrate. In reconstituted sPMCA reactions using purified substrates, n-octylglucoside inhibited hamster prion formation when immunopurified bank vole PrPC substrate was supplemented with brain phospholipid but not with RNA. Interestingly, phospholipid cofactor solubilization had no effect in sPMCA reactions using bacterially expressed recombinant PrP substrate, indicating that the inhibitory effect of solubilization requires PrPC post-translational modifications. Overall, these in vitro results show that the ability of PE to facilitate the formation of native but not recombinant prions requires phospholipid bilayer integrity, suggesting that membrane structure may play an important role in prion formation in vivo.

Decellularization: Leveraging a Tissue Engineering Technique for Food Production.

The edible nature of many plants makes leaves particularly useful as scaffolds for the development of cultured meat, where animal tissue is grown in the laboratory setting. Recently, we demonstrated that decellularized spinach leaves can serve as scaffolds to grow and differentiate cells for cultured meat products. However, conventional decellularization methods use solutions that are not considered safe for use in food, such as organic solvents (hexanes) and detergents (triton X-100 (TX100)). This study modified decellularization protocols to incorporate detergents that are regulated (REG) by the United States Food and Drug Administration (FDA) for use in food, such as Polysorbate 20 (PS20), and eliminates the use of hexanes for cuticle removal. Spinach leaves were decellularized with sodium dodecyl sulfate and then with either TX100 (control) or PS20. The average DNA content for TX100 samples and PS20 samples was similar (1.3 ± 0.07 vs 1.3 ± 0.05 ng/mg; TX100 vs PS20, p = ns). The importance of cuticle removal was tested by removing hexanes from the protocol. Groups that included the cuticle removal step exhibited an average reduction in DNA content of approximately 91.7%, and groups that omitted the cuticle removal step exhibited an average reduction of approximately 90.3% (p = ns), suggesting that the omission of the cuticle removal step did not impede decellularization. Lastly, primary bovine satellite cells (PBSCs) were cultured for 7 days (d) on the surface of spinach leaves decellularized using the REG protocol. After the 7 d incubation period, PBSCs grown on the surface of REG scaffolds had an average viability of approximately 97.4%. These observations suggest that the REG protocol described in this study is an effective decellularization method, more closely adhering to food safety guidelines, that could be implemented in lab grown meat and alternative protein products.

Detergent-Mediated Virus Inactivation in Biotechnological Matrices: More than Just CMC.

For decades, the ability of detergents to solubilize biological membranes has been utilized in biotechnological manufacturing to disrupt the lipid envelope of potentially contaminating viruses and thus enhance the safety margins of plasma- and cell-derived drugs. This ability has been linked to detergent micelles, which are formed if the concentration of detergent molecules exceeds the critical micelle concentration (CMC). Traditionally, the CMC of detergents is determined in deionized water (ddH2O), i.e., a situation considerably different from the actual situation of biotechnological manufacturing. This study compared, for five distinct detergents, the CMC in ddH2O side-by-side with two biopharmaceutical process intermediates relevant to plasma-derived (Immunoglobulin) and cell-derived (monoclonal antibody) products, respectively. Depending on the matrix, the CMC of detergents changed by a factor of up to ~4-fold. Further, the CMC in biotechnological matrices did not correlate with antiviral potency, as Triton X-100 (TX-100) and similar detergents had comparatively higher CMCs than polysorbate-based detergents, which are known to be less potent in terms of virus inactivation. Finally, it was demonstrated that TX-100 and similar detergents also have virus-inactivating properties if applied below the CMC. Thus, the presence of detergent micelles might not be an absolute prerequisite for the disruption of virus envelopes.

In situ isolation of nuclei or nuclear proteins from adherent cells: a simple, effective method with less cytoplasmic contamination.

BACKGROUND: Isolation of nuclei or nuclear proteins is a prerequisite for western blot, nuclear proteome profiling, and other evaluations of nuclear proteins. Here, we developed a simple method for in situ isolation of nuclei or nuclear proteins by in situ removing the extranuclear part of adherent cells via a classical nonionic detergent triton X-100. RESULTS: First, the feasibility of our method was confirmed by confocal microscopy, atomic force microscopy, scanning electron microscopy, dynamic light scattering, immunofluorescence imaging, and time-lapse dynamic observation. Next, the optimal concentration range (approximately 0.1-1% for ~ 10 min) of triton X-100 and the optimal treatment time (< 30 min) of 0.1-1% Triton X-100 for our method were determined via western blotting of eight extra-/intra-nuclear proteins. Subsequently, the effectiveness, sensitivity, and cytoplasmic contamination of our method were tested by investigating the levels of phosphorylated p65 (a NF-κB subunit) in the nuclei of endothelial or tumor cells treated with/without lipopolysaccharide (LPS) via western blotting and by comparing with a commercial nuclear protein extraction kit (a classical detergent-based method). The data show that compared with the commercial kit our method obtained a higher yield of total nuclear proteins, a higher pP65 level in both control and LPS groups, and much lower content of GAPDH (as a reference for cytoplasmic contamination) in nuclei. CONCLUSIONS: The in situ isolation of nuclei or nuclear proteins from adherent cells in this study is a simple, effective method with less cytoplasmic contamination. This method/strategy has the potential of improving the quality of downstream evaluations including western blotting and proteomic profiling.

Comparison of decellularization protocols for cultured cell-derived extracellular matrix-Effects on decellularization efficacy, extracellular matrix retention, and cell functions.

The in vitro reconstruction of the extracellular matrix (ECM) is required in tissue engineering and regenerative medicine because the ECM can regulate cell functions in vivo. For ECM reconstruction, a decellularization technique is used. ECM reconstructed by decellularization (dECM) is prepared from tissues/organs and cultured cells. Although decellularization methods have been optimized for tissue-/organ-derived dECM, the methods for cultured cell-derived dECM have not yet been optimized. Here, two physical (osmotic shocks) and five chemical decellularization methods are compared. The decellularization efficacies were changed according to the decellularization methods used. Among them, only the Triton X-100 and Tween 20 treatments could not decellularize completely. Additionally, when the efficacies were compared among different types of cells (monolayered cells with/without strong cell adhesion, multilayered cells), the efficacies were decreased for multilayered cells or cells with strong cell adhesion. Retained ECM contents tended to be greater in the dECM prepared by osmotic shocks than in those prepared by chemical methods. The contents impacted cell adhesion, shapes, growth and intracellular signal activation on the dECM. The comparison would be helpful for the optimization of decellularization methods for cultured cells, and it could also provide new insights into developing milder decellularization methods for tissues and organs.

Effects of triton X-100 pretreatment of lyophilized and frozen-thawed ram sperm on preimplantation embryo developmental competence.

In this study, it was aimed to determine the effect of destruction of lyophilized and frozen-thawed ram sperm plasma and acrosomal membrane on development of embryos produced by intracytoplasmic sperm injection (ICSI). Semen samples were divided into two groups for lyophilization (L) and freezing (F). For the removal of the plasma membrane, L and F groups were incubated with Triton X-100 (LTX-100 and FTX-100, respectively). Integrities of the plasma membrane, acrosome and chromatin structure were evaluated. Oocytes were injected with these sperm groups. Although no plasma membrane and acrosome integrities of the L (0.0%) group were detected, the plasma membrane integrity of the F group (69.4%) was significantly higher than the FTX-100 group (23.6%) (p < 0.05). The acrosome integrity of the FTX-100 group (3.80%) was significantly lower than the F group (55.6%) (p < 0.05). The chromatin integrities of L and F groups were higher than the Triton X-100 treated groups (p < 0.05). ICSIs with L, LTX-100, F and FTX-100 sperm were produced similar cleavage and blastocyst rates. In conclusion, data presented here confirm that ram spermatozoa can effectively be lyophilized and injected into oocytes for initiation of embryonic development and Triton X-100 pretreatment is not necessary while using lyophilized and frozen semen.

In situ isolation of nuclei or nuclear proteins from adherent cells: a simple, effective method with less cytoplasmic contamination

BACKGROUND: Isolation of nuclei or nuclear proteins is a prerequisite for western blot, nuclear proteome profiling, and other evaluations of nuclear proteins. Here, we developed a simple method for in situ isolation of nuclei or nuclear proteins by in situ removing the extranuclear part of adherent cells via a classical nonionic detergent triton X-100. RESULTS: First, the feasibility of our method was confirmed by confocal microscopy, atomic force microscopy, scanning electron microscopy, dynamic light scattering, immunofluorescence imaging, and time-lapse dynamic observation. Next, the optimal concentration range (approximately 0.1-1% for ~ 10 min) of triton X-100 and the optimal treatment time (< 30 min) of 0.1-1% Triton X-100 for our method were determined via western blotting of eight extra-/ intra-nuclear proteins. Subsequently, the effectiveness, sensitivity, and cytoplasmic contamination of our method were tested by investigating the levels of phosphorylated p65 (a NF-κB subunit) in the nuclei of endothelial or tumor cells treated with/without lipopolysaccharide (LPS) via western blotting and by comparing with a commercial nuclear protein extraction kit (a classical detergent-based method). The data show that compared with the commercial kit our method obtained a higher yield of total nuclear proteins, a higher pP65 level in both control and LPS groups, and much lower content of GAPDH (as a reference for cytoplasmic contamination) in nuclei. CONCLUSIONS: The in situ isolation of nuclei or nuclear proteins from adherent cells in this study is a simple, effective method with less cytoplasmic contamination. This method/strategy has the potential of improving the quality of downstream evaluations including western blotting and proteomic profiling.

Contribution to optimization and standardization of antibacterial assays with silver nanoparticles: the culture medium and their aggregation.

The antimicrobial activity of silver nanoparticles is determined by their size and specific properties, as well as by the chemical composition of the exposure medium in which the nanoparticles are suspended. When the antibacterial tests are carried out in a culture medium, aggregation of the nanoparticles is produced, decreasing their effectiveness. This study proposes the addition of surfactants to the culture medium to prevent the aggregation of silver nanoparticles and optimizes the concentrations of these surfactants. The aggregation of silver nanoparticles was studied by dynamic light scattering (DLS) after dispersion in three liquid culture media (Mueller-Hinton (MH), Luria-Bertani (LB) and Brain Heart Infusion) in which four different surfactants (SDS, Triton X100, Tween 80 and CTAB) were added at concentrations of 0, 0.1, 0.5, 1, 1.5 and 2%. Results showed that, the optimal culture media to prevent aggregation of silver nanoparticles were MH and LB with higher concentrations of Tween 80 and Triton X100 surfactants; being MH + 2% of Tween 80 and MH + 1% Triton X100 the best combinations obtained because the results obtained were closest to the sizes of nanoparticles in ultrapure water. In addition, it has been verified that the optimal medium + surfactant combinations chosen did not affect the viability of Escherichia coli bacteria. Nanoparticle aggregation was not observed by single particle inductively coupled plasma mass spectrometry (SP-ICP-MS) when nanoparticles were incubated for long incubations periods (24 h) in the optimal medium chosen.

Cardiac-derived extracellular matrix: A decellularization protocol for heart regeneration.

Extracellular matrix (ECM) is a fundamental component of the heart, guiding vital cellular processes during organ homeostasis. Most cardiovascular diseases lead to a remarkable remodeling of the ECM, accompanied by the formation of a fibrotic tissue that heavily compromises the heart function. Effective therapies for managing fibrosis and promoting physiological ECM repair are not yet available. The production of a decellularized extracellular matrix (d-ECM) serving as a three-dimensional and bioactive scaffold able to modulate cellular behavior and activities is considered crucial to achieve a successful regeneration. The protocol represents a step-by-step method to obtain a decellularized cardiac matrix through the combination of sodium dodecyl sulphate (SDS) and Triton X-100. Briefly, cardiac samples obtained from left ventricles of explanted, pathological human hearts were dissected and washed to remove residual body fluids. Samples were then snap-frozen and sliced by a cryostat into 350 µm thick sections. The sections obtained were decellularized using a solution containing 1% Triton X-100 and 1% SDS in combination, for 24 hours, until observing the color change from brownish-red to translucent-white. As a result, the protocol shows efficiency in preserving ECM architecture and protein composition during the whole process, suggesting that it is worthwhile, highly reproducible and produces a well- preserved decellularized extracellular matrix from cardiac samples. Notwithstanding, some limitations need to be addressed, such as the risk for microbial contamination and the unpredictable trend of the protocol when applied to decellularize samples other than myocardium, vessels, or skin. These issues require antibiotics mixture supplement during the procedure followed by UV sterilization, and appropriate adjustments for a tissue-specific utilization, respectively. The protocol is intended to produce a cardiac d-ECM for cell settlement, representing the ideal scaffold for tissue engineering purposes.

Establishment of decellularized extracellular matrix scaffold derived from caprine pancreas as a novel alternative template over porcine pancreatic scaffold for prospective biomedical application.

In this study, the caprine pancreas has been presented as an alternative to the porcine organ for pancreatic xenotransplantation with lesser risk factors. The obtained caprine pancreas underwent a systematic cycle of detergent perfusion for decellularization. It was perfused using anionic (0.5% w/v sodium dodecyl sulfate) as well as non-ionic (0.1% v/v triton X-100, t-octyl phenoxy polyethoxy ethanol) detergents and washed intermittently with 1XPBS supplemented with 0.1% v/v antibiotic and nucleases in a gravitation-driven set-up. After 48 h, a white decellularized pancreas was obtained, and its extracellular matrix (ECM) content was examined for scaffold-like properties. The ECM content was assessed for removal of cellular content, and nuclear material was evaluated with temporal H&E staining. Quantified DNA was found to be present in a negligible amount in the resultant decellularized pancreas tissue (DPT), thus prohibiting it from triggering any immunogenicity. Collagen and fibronectin were confirmed to be preserved upon trichrome and immunohistochemical staining, respectively. SEM and AFM images reveal interconnected collagen fibril networks in the DPT, confirming that collagen was unaffected. sGAG was visualized using Prussian blue staining and quantified with DMMB assay, where DPT has effectively retained this ECM component. Uniaxial tensile analysis revealed that DPT possesses better elasticity than NPT (native pancreatic tissue). Physical parameters like tensile strength, stiffness, biodegradation, and swelling index were retained in the DPT with negligible loss. The cytocompatibility analysis of DPT has shown no cytotoxic effect for up to 72 h on normal insulin-producing cells (MIN-6) and cancerous glioblastoma (LN229) cells in vitro. The scaffold was recellularized using isolated mouse islets, which have established in vitro cell proliferation for up to 9 days. The scaffold received at the end of the decellularization cycle was found to be non-toxic to the cells, retained biological and physical properties of the native ECM, suitable for recellularization, and can be used as a safer and better alternative as a transplantable organ from a xenogeneic source.

Effect of thermal and chemical treatments used for SARS-COV-2 inactivation in the measurement of saliva analytes.

The present study aims to assess the effects of thermal and chemical inactivating procedures, that can be used for SARS-CoV-2 inactivation, on different salivary analytes. SDS-Polyacrylamide Gel Electrophoresis (SDS-PAGE) protein profile and a panel of 25 specific biomarkers of oxidative status, stress, metabolism and tissue damage were evaluated in samples subjected to different treatments: thermal (65 °C or 92 °C) and chemical with detergents [sodium dodecyl sulphate (SDS), Triton X-100 or NP-40]. Salivary SDS-PAGE profile was most affected by heating at 92 °C, with three and two protein bands decreasing and increasing their expression levels, respectively. This treatment also affected the results of several enzymes, with some of them being also affected by heating at 65 °C and incubation with SDS. The use of Triton X-100 or NP-40 resulted in increased values of cortisol, triglycerides and glucose, not affecting the other tested biomarkers. The present results will help researchers and clinicians to select the best protocols to work in safe conditions with saliva, taking into account the target analyte planned to be measured.

Supported Lipid Bilayer Platform for Characterizing the Membrane-Disruptive Behaviors of Triton X-100 and Potential Detergent Replacements.

Triton X-100 (TX-100) is a widely used detergent to prevent viral contamination of manufactured biologicals and biopharmaceuticals, and acts by disrupting membrane-enveloped virus particles. However, environmental concerns about ecotoxic byproducts are leading to TX-100 phase out and there is an outstanding need to identify functionally equivalent detergents that can potentially replace TX-100. To date, a few detergent candidates have been identified based on viral inactivation studies, while direct mechanistic comparison of TX-100 and potential replacements from a biophysical interaction perspective is warranted. Herein, we employed a supported lipid bilayer (SLB) platform to comparatively evaluate the membrane-disruptive properties of TX-100 and a potential replacement, Simulsol SL 11W (SL-11W), and identified key mechanistic differences in terms of how the two detergents interact with phospholipid membranes. Quartz crystal microbalance-dissipation (QCM-D) measurements revealed that TX-100 was more potent and induced rapid, irreversible, and complete membrane solubilization, whereas SL-11W caused more gradual, reversible membrane budding and did not induce extensive membrane solubilization. The results further demonstrated that TX-100 and SL-11W both exhibit concentration-dependent interaction behaviors and were only active at or above their respective critical micelle concentration (CMC) values. Collectively, our findings demonstrate that TX-100 and SL-11W have distinct membrane-disruptive effects in terms of potency, mechanism of action, and interaction kinetics, and the SLB platform approach can support the development of biophysical assays to efficiently test potential TX-100 replacements.

Identification of compendial nonionic detergents for the replacement of Triton X-100 in bioprocessing.

We have systematically investigated six compendial nonionic detergents as potential replacements for Triton ×-100 in bioprocessing applications. Use of compendial raw materials in cGMP bioprocessing is advantageous for a variety of reasons including material specifications developed to meet stringent pharmaceutical product quality requirements, regulatory familiarity and comfort, and availability from vendors experienced supplying the biopharmaceutical industry. We first examine material properties of the detergents themselves including melting point and viscosity. Process performance and product contact in real-world bioprocess applications are then investigated. Lastly, we test the detergents in virus inactivation (VI) experiments with recombinant proteins and adeno-associated virus. Two of the detergents tested, PEG 9 Lauryl Ether and PEG 6 Caprylic/Capric Glycerides, showed favorable properties that make them attractive for use as potential Triton X-100 replacements. Process performance testing indicated negligible impact of the detergents on product yield, purity, and activity compared to a control with no detergent. Importantly, both PEG 9 Lauryl Ether and PEG 6 Caprylic/Capric Glycerides demonstrated very fast VI kinetics with complete inactivation of XMuLV observed in less than 1 min at a target 1% detergent concentration. Potential advantages and disadvantages of both candidate detergents for use in cGMP bioprocessing are summarized and discussed.

Extracellular production of azurin from Pseudomonas aeruginosa in the presence of Triton X-100 or Tween 80.

Azurin which is a bacterial secondary metabolite has attracted much attention as potential anticancer agent in recent years. This copper-containing periplasmic redox protein supresses the tumor growth selectively. High-level secretion of proteins into the culture medium offers a significant advantage over periplasmic or cytoplasmic expression. The aim of this study was to investigate the effect of nonionic surfactants on the expression of the Pseudomonas aeruginosa azurin. Different concentrations of Triton X-100 and Tween 80 were used as supplements in growth media and extracellular azurin production was stimulated by both surfactants. According to western blot analysis results, in the presence of Triton X-100, maximum azurin expression level was achieved with 96 h of incubation at 1% concentration, and 48 h at 2% concentration. On the other hand, maximum azurin expression level was achieved in the presence of 1% Tween 80 at 72 h incubation. This study suggested for the first time a high level of azurin secretion from P. aeruginosa in the presence of Triton X-100 or Tween 80, which would be advantageous for the purification procedure.

Decellularization with triton X-100 provides a suitable model for human kidney bioengineering using human mesenchymal stem cells.

AIMS: Regeneration of discarded human kidneys has been considered as an ideal approach to overcome organ shortage for the end-stage renal diseases (ESRDs). The aim of this study was to develop an effective method for preparation of kidney scaffolds that retain the matrix structure required for proliferation and importantly, differentiation of human adipose-derived mesenchymal stem cells (hAd-MSCs) into renal cells. MAIN METHODS: We first compared two different methods using triton X-100 and sodium dodecyl sulfate (SDS) for human kidney decellularization; followed by characterization of the prepared human renal extracellular matrix (ECM) scaffolds. Then, hAd-MSCs were seeded on the scaffolds and cultured for up to 3 weeks. Next, viability, proliferation, and migration of seeded hAd-MSCs underwent histological and scanning electron microscopy (SEM) assessments. Moreover, differentiation of hAd-MSCs into kidney-specific cell types was examined using immunohistochemistry (IHC) staining and qRT-PCR. KEY FINDINGS: Our results indicated that triton X-100 was a more effective detergent for decellularization of human kidneys compared with SDS. Moreover, attachment and proliferation of hAd-MSCs within the recellularized human kidney scaffolds, were confirmed. Seeded cells expressed epithelial and endothelial differentiation markers, and qRT-PCR results indicated increased expression of platelet and endothelial cell adhesion molecule 1 (PECAM-1), paired box 2 (PAX2), and E-cadherine (E-CDH) as markers of differentiation into epithelial and endothelial cells. SIGNIFICANCE: These observations indicate the effectiveness of decellularization with triton X-100 to generate suitable human ECM renal scaffolds, which supported adhesion and proliferation of hAd-MSCs and could induce their differentiation towards a renal lineage.

A novel method for providing scaffold: Decellularization of parathyroid capsule.

This study aimed to generate a novel biomatrix from the decellularized human parathyroid capsule using different methods and to compare the efficiency of decellularization in the means of cell removal, structural integrity and extracellular matrix preservation. The parathyroid capsules, which were carefully dissected from the parathyroid tissue, were randomly divided into four groups and then decellularized using three different protocols: freeze-thaw only, sodium dodecyl sulphate and Triton X-100 treatments after freeze-thawing. Quantitative DNA analysis, agarose gel electrophoresis, sulphated glycosaminoglycan assay, histological analysis, immunohistochemistry and scanning electron microscopy were used to observe the efficiency of parathyroid capsule decellularization and preservation of extracellular matrix components. Considering all the results, it can be said that only freeze-thawing is not an effective method in parathyroid capsule decellularization. When the tissue was treated with a detergent agent in addition to freeze-thawing, the amount of DNA decreased by 90% while sulphated glycosaminoglycan amount maintained 50% compared to untreated tissue. Comparing the effects of the two detergents on the preservation of extracellular matrix such as collagen and sulphated glycosaminoglycan, it was seen that the integrity of tissues treated with Triton X-100 was preserved more than tissues treated with sodium dodecyl sulphate. It is concluded that Triton X-100 treatment with freeze-thawing is the most suitable and effective method for decellularizing the human parathyroid capsule. The biomatrix obtained with this method can be applied in the transplantation of parathyroid tissue and other endocrine tissue types in the body.

Preparation of decellularized optic nerve grafts.

BACKGROUND: Decellularized tissues based on well-conserved extracellular matrices (ECMs) are a common area of research in tissue engineering. Although several decellularization protocols have been suggested for several types of tissues, studies on the optic nerve have been limited. METHODS: We report decellularization protocol with different detergent for the preparation of acellular optic nerve and tissues were examined. DNA, glycosaminoglycan (GAG), and collagen content of the groups were evaluated with biochemical analyses and examined with histological staining. Mechanical properties, chemical components as well as cytotoxic properties of tissues were compared. RESULTS: According to the results, it was determined that TX-100 (Triton X-100) was insufficient in decellularization when used alone. In addition, it was noticed that 85% of GAG content was preserved by using TX-100 and TX-100-SD (sodium deoxycholate), while this ratio was calculated as 30% for SDS. In contrast, the effect of the decellularization protocols on ECM structure of the tissues was evaluated by scanning and transmission electron microscopy (SEM and TEM) and determined their mechanical properties. Cytotoxicity analyses were exhibited minimum 95% cell viability for all groups, suggesting that there are no cytotoxic properties of the methods on L929 mouse fibroblast cells. CONCLUSIONS: The combination of TX-100-SD and TX-100-SDS (sodium dodecyl sulfate) were was determined as the most effective methods to the literature for optic nerve decellularization.