Electrochemical sensing of hydrogen peroxide using a glassy carbon electrode modified with multiwalled carbon nanotubes and zein nanoparticle composites: application to HepG2 cancer cell detection.

A nanobiocomposite was prepared from multiwalled carbon nanotubes and zein nanoparticles. It was dispersed in water/ethanol and drop cast onto a glassy carbon electrode. The modified electrode can be used for electroreduction of H2O2 (typically at a working potential of -0.71 V vs. Ag/AgCl). The electrochemical properties of the electrode were investigated by cyclic voltammetry, linear sweep voltammetry, chronoamperometry and electrochemical impedance spectroscopy. Response to H2O2 is linear in the 0.049 to 22 µM concentration range, and the detection limit is 35 nM at pH 7.0. The sensor was successfully utilized for the measurement of H2O2 in a synthetic urine sample, and for monitoring the release of H2O2 from human dermal fibroblasts and human hepatocellular carcinoma cells. Graphical abstractSchematic representation of a novel metal- and enzyme-free electrochemical nanosensor. A glassy carbon electrode was modified with a nanocomposite prepared from multiwalled carbon nanotubes and zein nanoparticles. It was applied to the identification of liver cancer cells via sensing of H2O2 and has a very low detection limit.

Novel manganese(II)-based metal-organic gels: synthesis, characterization and application to chemiluminescent sensing of hydrogen peroxide and glucose.

A metal-organic gel (MOG) was synthesized that is composed of manganese(II) as the central ion and 1,10-phenanthroline-2,9-dicarboxylic acid as the ligand. The resulting MOG exhibits excellent activity for catalyzing the chemiluminescence (CL) of the luminol/hydrogen peroxide system. The CL system was characterized by CL spectra, UV-vis absorption spectra and by studying potential interferences by common radical scavengers. The CL reaction was exploited in a new scheme for the determination of hydrogen peroxide. CL intensity increases linearly in the 0.4 µM ~ 3 mM hydrogen peroxide concentration range, and the limit of detection (LOD) is 0.12 µM. The method was extended to an enzymatic assay for glucose by using glucose oxidase and by measurement of the enzymatically formed hydrogen peroxide. The assay works in the 0.2 µM ~ 3 mM glucose concentration range, and the LOD is 0.08 µM. Graphical abstract Schematic representation of the synthesized Mn-containing MOGs catalyzing luminol-hydrogen peroxide chemiluminescent reaction, which can be used to establish a new CL method for the detection of hydrogen peroxide and glucose.

3D hierarchical hollow hydrangea-like Fe3+@ɛ-MnO2 microspheres with excellent electrochemical performance for dopamine and hydrogen peroxide.

Construction a sensor to accurately detect dopamine (DA) and hydrogen peroxide (H2O2) is meaningful due to their close relation to the health of organisms. In this work, one-step hydrothermal method was employed to synthesize hierarchical hollow hydrangea-like Fe3+@ɛ-MnO2 microspheres constructed by interconnected nanosheets, and the growth mechanism of the microspheres (nFe/nMn = 0.6) was also investigated in detail. The material was used to construct an electrochemical sensor for DA and H2O2 detection with the linear range of 0.02-78 µmoL-1 and 0.000133-5.19 mmoL-1, respectively. The detection limit and sensitivity for DA and H2O2 are 5 and 50 nmoL-1 (S/N = 3), 7034.1 and 242.6 µA m(mol·L-1)-1 cm-2, respectively. Furthermore, the sensor was successfully applied to the detection of DA and H2O2 in serum and urine samples, indicating a potential value of this work in the pharmaceutical and environmental fields.

Defect and Additional Active Sites on the Basal Plane of Manganese-Doped Molybdenum Diselenide for Effective Enzyme Immobilization: In Vitro and in Vivo Real-Time Analyses of Hydrogen Peroxide Sensing.

The defect engineering makes the new concepts and designs to further enhance the electrocatalytic activity of layered structures. In this work, we demonstrated the synthesis of Mn-doped MoSe2 and reported the resultant defective sites. Subsequently, the MnMoSe2 was developed as a new type of electrocatalyst for electrochemical biosensors. The formation of defect/distortion and effective immobilization of myoglobin (Mb) were evidently confirmed by using the transmission electron microscopy and UV-vis spectroscopy analyses, respectively. The result of electrochemical impedance spectroscopy analysis reveals that the Mn doping not only helps  to enzyme immobilization but also enhances the electronic conductivity of layered material.  Owing to the multiple signal amplification strategies, the proposed Mb-immobilized MnMoSe2 (Mb@MnMoSe2) exhibited an ultralow detection limit (0.004 µM) and a higher sensitivity (222.78 µA µM-1 cm-2) of H2O2. In real-sample analysis, the Mb@MnMoSe2 showed a feasible recovery range of H2O2 detection in human serum (95.6-102.1%), urine (101.2-102.3%), and rain water (100.7-102.1%) samples. On the other hand, an in vivo study using HaCaT (7.1 × 105/mL) and RAW 264.7 (1 × 106/mL) living cells showed the feasible current responses of 0.096 and 0.085 µA, respectively. Finally, the Mn doping gives a new opportunity to fabricate a promising electrocatalyst for H2O2 biosensing.

Low-cost and environment-friendly synthesis of carbon nanorods assembled hierarchical meso-macroporous carbons networks aerogels from natural apples for the electrochemical determination of ascorbic acid and hydrogen peroxide.

In this work, the low-cost carbon nanorods assembled hierarchical meso-macroporous carbons networks aerogels (CNs-HMCNAs) was environment-friendly synthesized from a cheap and abundant biomass of apples (Malus pumila Mill) for the first time. The biomass of apples derived CNs-HMCNAs exhibited the unique hierarchical meso-macroporous structure with large specific surface area and high density of edge defective sites. At the CNs-HMCNAs modified GCE (CNs-HMCNAs/GCE), the electron transfer between the glassy carbon electrode (GCE) and the ascorbic acid (AA) (or hydrogen peroxide (H2O2)) was effectively enhanced, and thus induced a low overvoltage for AA electrooxidation (or H2O2 electroreduction). As an electrochemical AA (or H2O2) sensor, the CNs-HMCNAs/GCE exhibited wider linear range, lower detection limit, higher sensitivity and stability than GCE and the carbon nanotubes modified GCE (CNTs/GCE). In particular, the CNs-HMCNAs/GCE showed great potential feasibility in the practical determination of AA (in AA injection, Vitamin C tablet and kiwi juice) or H2O2 (in human urine, milk and beer).

Changes in Urinary Hydrogen Peroxide and 8-Hydroxy-2'-Deoxyguanosine Levels after a Forest Walk: A Pilot Study.

Some studies have shown that exposure to forests has positive effects on human health, although the mechanisms underlying the health benefits of a forest environment have not been elucidated yet. The current study was aimed at examining how the levels of urinary hydrogen peroxide (H2O2) and 8-hydroxy-2'deoxyguanosine (8-OHdG) change after a forest or urban walk in healthy subjects. Twenty-eight volunteers (19 men and 9 women) participated in the study. The forest walks were carried out in a forest in Okayama Prefecture, Japan, and the urban walks (15 men and 7 women) were carried out in the downtown area of Okayama city, each for two hours. Spot urine samples were collected before the walk, the next day and one week after the forest or urban walk. Compared with pre-forest walk levels, urinary H2O2 (p < 0.1) and 8-OHdG (p < 0.1) concentrations significantly decreased in the participants the day after the forest walk; furthermore, urinary 8-OHdG remained at a low level even at one week after the forest walk (p < 0.05). However, there were no significant changes in the concentrations of these oxidative biomarkers after the urban walk. These findings suggest the possibility that exposure to forests may alleviate oxidative stress in the body.

Two dimensional α-MoO3-x nanoflakes as bare eye probe for hydrogen peroxide in biological fluids.

We report a rapid and facile method for detection of hydrogen peroxide (H2O2) in biological fluids using sub-stoichiometric two-dimensional (2D) molybdenum trioxide (α-MoO3-x) nanoflakes. The two-dimensional nanoflakes, initially blue in color, is oxidized after interaction with hydrogen peroxide thereby changing its oxidation state to form α-MoO3. The change in oxidation state of nanoflakes transforms from blue to a visually distinct hazy blue color with change in absorption spectrum. The phenomenal property is explored here in sensing up to 34 nM as limit of detection. The efficacy of the detection system was analyzed by "zone of inhibition" based agar diffusion assay with different concentrations of H2O2. The current approach is highly accurate, effective and reproducible for quantification of physiological concentration of H2O2 in biological fluid such as human urine.

A new 3D printed radial flow-cell for chemiluminescence detection: Application in ion chromatographic determination of hydrogen peroxide in urine and coffee extracts.

A new polymer flow-cell for chemiluminescence detection (CLD) has been designed and developed by diverging multiple linear channels from a common centre port in a radial arrangement. The fabrication of radial flow-cell by 3D PolyJet printing and fused deposition modeling (FDM) has been evaluated, and compared with a similarly prepared spiral flow-cell design commonly used in chemiluminescence detectors. The radial flow-cell required only 10 h of post-PolyJet print processing time as compared to ca. 360 h long post-PolyJet print processing time required for the spiral flow-cell. Using flow injection analysis, the PolyJet 3D printed radial flow-cell provided an increase in both the signal magnitude and duration, with an average increase in the peak height of 63% and 58%, peak area of 89% and 90%, and peak base width of 41% and 42%, as compared to a coiled-tubing spiral flow-cell and the PolyJet 3D printed spiral flow-cell, respectively. Computational fluid dynamic (CFD) simulations were applied to understand the origin of the higher CLD signal obtained with the radial flow-cell design, indicating higher spatial coverage near the inlet and lower linear velocities in the radial flow-cell. The developed PolyJet 3D printed radial flow-cell was applied in a new ion chromatography chemiluminescence based assay for the detection of H2O2 in urine and coffee extracts.

The Correlation Between Urinary 8-Iso-Prostaglandin F2α and Hydrogen Peroxide Toward Renal Function in T2DM Patients Consuming Sulfonylurea and Combination of Metformin-Sulfonylurea.

BACKGROUND: Renal dysfunction is a common complication in type 2 diabetes mellitus patients associated with oxidative damage which could be characterized by 8-iso-prostaglandin F2α and hydrogen peroxide level as oxidative stress markers. OBJECTIVE: The aim of our study is to determine if there is a difference in 8-iso-prostaglandin F2α and hydrogen peroxide levels between sulfonylurea and combination of metformin-sulfonylurea in diabetic patients. We also wanted to determine if these oxidative stress markers correlate with the estimated Glomerular Filtration Rate (eGFR). SUBJECTS AND METHODS: We conducted a cross-sectional study with inclusion of 55 patients with type 2 diabetes mellitus in Dr. Sitanala Tangerang Hospital, Indonesia with purposive sampling. The value of eGFR was obtained by serum creatinine levels, while the level of 8-iso-prostaglandin F2α was measured by ELISA and urinary hydrogen peroxide using FOX-1 (Ferrous Ion Oxidation Xylenol Orange 1). RESULTS: There was no difference in 8-iso-prostaglandin F2α and hydrogen peroxide level between the two groups (p=0.088 and p=0.848). Moreover, there was no difference in eGFR values between the two groups, measured by Cockroft-Gault, MDRD, and CKD-EPI. 8-iso-prostaglandin F2α (n=55) was positively correlated with eGFR based on Cockroft-Gault (r=0.382; p=0.009), whereas urinary hydrogen peroxide (n=47) also generate significant positive correlation with eGFR based on the MDRD equation (r=0.326; p=0.021). Linear regression analysis showed that 8-iso-prostaglandin F2α is the most predictive factor and the only significant factor for eGFR in Cockroft-Gault, MDRD and also CKDEPI, even after controlled by gender, age, BMI, HbA1c, systole, and H2O2. CONCLUSION: The two treatments did not have any significant differences in antioxidant activity. However, an increase of urinary 8-iso-prostaglandin F2. and hydrogen peroxide which correlates with eGFR in the total sample may play a significant role in the pathophysiology of diabetic nephropathy.

Acute In Vivo Analysis of ATP Release in Rat Kidneys in Response to Changes of Renal Perfusion Pressure.

BACKGROUND: ATP and derivatives are recognized to be essential agents of paracrine signaling. It was reported that ATP is an important regulator of the pressure-natriuresis mechanism. Information on the sources of ATP, the mechanisms of its release, and its relationship to blood pressure has been limited by the inability to precisely measure dynamic changes in intrarenal ATP levels in vivo. METHODS AND RESULTS: Newly developed amperometric biosensors were used to assess alterations in cortical ATP concentrations in response to changes in renal perfusion pressure (RPP) in anesthetized Sprague-Dawley rats. RPP was monitored via the carotid artery; ligations around the celiac/superior mesenteric arteries and the distal aorta were used for manipulation of RPP. Biosensors were acutely implanted in the renal cortex for assessment of ATP. Rise of RPP activated diuresis/natriuresis processes, which were associated with elevated ATP. The increases in cortical ATP concentrations were in the physiological range (1-3 µmol/L) and would be capable of activating most of the purinergic receptors. There was a linear correlation with every 1-mm Hg rise in RPP resulting in a 70-nmol/L increase in ATP. Furthermore, this elevation of RPP was accompanied by a 2.5-fold increase in urinary H2O2. CONCLUSIONS: Changes in RPP directly correlate with renal sodium excretion and the elevation of cortical ATP. Given the known effects of ATP on regulation of glomerular filtration and tubular transport, the data support a role for ATP release in the rapid natriuretic responses to acute increases in RPP.

Corticotropin-releasing factor receptor-1 modulates biomarkers of DNA oxidation in Alzheimer's disease mice.

Increased production of hydroxyl radical is the main source of oxidative damage in mammalian DNA that accumulates in Alzheimer's disease (AD). Reactive oxygen species (ROS) react with both nuclear DNA (nDNA) and mitochondrial DNA (mtDNA) to generate 8-hydroxy-2'-deoxyguanosine (8-OHdG), both of which can be measured in the urine. Knowledge of this pathway has positioned measurement of urine 8-OHdG as a reliable index of DNA oxidation and a potential biomarker target for tracking early cellular dysfunction in AD. Furthermore, epigenetic studies demonstrate decreased global DNA methylation levels (e.g. 5-methyl-2'-deoxycytidine, 5-mdC) in AD tissues. Moreover, stress hormones can activate neuronal oxidative stress which will stimulate the release of additional stress hormones and result in damages to hippocampal neurons in the AD brain. Our previous work suggests that treating AD transgenic mice the type-1 corticotropin-releasing factor receptor (CRFR1) antagonist, R121919, to reduce stress signaling, prevented onset of cognitive impairment, synaptic/dendritic loss and Aß plaque accumulation. Therefore, to investigate whether levels of DNA oxidation can be impacted by the same therapeutic approach, urine levels of hydrogen peroxide, 8-OHdG, 5-mdC and total antioxidant capacity (TAC) were analyzed using an AD Tg mouse model. We found that Tg animals had an 80% increase in hydrogen peroxide levels compared to wild type (Wt) counterparts, an effect that could be dramatically reversed by the chronic administration with R121919. A significant decrease of 8-OHdG levels was observed in Tg mice treated with CRFR1 antagonist. Collectively our data suggest that the beneficial effects of CRFR1 antagonism seen in Tg mice may be mechanistically linked to the modulation of oxidative stress pathways.

Core-shell iron oxide-layered double hydroxide: High electrochemical sensing performance of H2O2 biomarker in live cancer cells with plasma therapeutics.

In this work, we develop a new type of multifunctional core-shell nanomaterial by controllable integration of CuAl layered double hydroxides (LDHs) over the surface of iron oxides (Fe3O4) nanospheres (NSs) to fabricate (Fe3O4@CuAl NSs) hybrid material with interior tunability of LDH phase and explore its practical application in ultrasensitive detection of emerging biomarker, i.e., H2O2 as cancer diagnostic probe. In addition, atmospheric pressure plasmas (APPs) have also been used as potential therapeutic approach for cancer treatment. Due to the synergistic combination of p-type semiconductive channels of LDHs with multi-functional properties, unique morphology and abundant surface active sites, the Fe3O4@CuAl NSs modified electrode exhibited attractive electrocatalytic activity towards H2O2 reduction. Under the optimized conditions, the proposed biosensor demonstrated striking electrochemical sensing performances to H2O2 including linear range as broad as 8 orders of magnitude, low real detection limit of 1nM (S/N = 3), high sensitivity, good reproducibility and long-term stability. Arising from the superb efficiency, the electrochemical biosensor has been used for in vitro determination of H2O2 concentrations in human urine and serum samples prior to and following the intake of coffee, and real-time monitoring of H2O2 efflux from different cancer cell lines in normal state and after plasma treatment. We believe that this novel nano-platform of structurally integrated core-shell nanohybrid materials combined with APPs will enhance diagnostic as well as therapeutic window for cancer diseases.

Longer duration of obesity is associated with a reduction in urinary angiotensinogen in prepubertal children.

BACKGROUND: We aimed to study the impact of obesity on urinary excretion of angiotensinogen (U-AGT) in prepubertal children, focusing on the duration of obesity and gender. Also, we aimed to evaluate whether plasma angiotensinogen (P-AGT) and hydrogen peroxide (H2O2) play a role in the putative association. METHODS: Cross-sectional evaluation of 305 children aged 8-9 years (160 normal weight, 86 overweight, and 59 obese). Anthropometric measurements and 24-h ambulatory blood pressure monitoring were performed. Angiotensinogen (AGT) was determined by a commercial enzyme-linked immunosorbent assay (ELISA) kit and H2O2 by a microplate fluorometric assay. RESULTS: U-AGT and P-AGT levels were similar across body mass index (BMI) groups and between sexes. However, boys who were overweight/obese since the age of 4 years presented lower levels of U-AGT compared with those of normal weight at the same age. In children who were overweight/obese since the age of 4, urinary H2O2 decreased with P-AGT. CONCLUSIONS: A higher duration of obesity was associated with decreased U-AGT in boys, thus reflecting decreased intrarenal activity of the renin-angiotensin system. Also, children with a longer duration of obesity showed an inverse association between urinary H2O2 and P-AGT. Future studies should address whether these results reflect an early compensatory mechanism to limit obesity-triggered renal dysfunction.

Bipolar electrochemiluminescence on thread: A new class of electroanalytical sensors.

This paper introduces a new and simple concept for fabricating low-cost, easy-to-use capillary microchannel (CMC) assisted thread-based microfluidic analytical devices (CMCA-µTADs) for bipolar electrochemiluminescence (BP-ECL) application. The thread with patterns of carbon screen-printed electrodes and bare thread zones (BTZs) is embedded into a CMC. Such CMCA-µTADs can produce a strong and stable BP-ECL signal, and have an extremely low cost ($0.01 per device). Interestingly, the CMCA-µTADs are ultraflexible, and can be bent with a 135° bending angle at the BTZ or with a 150° bending angle at the middle of bipolar electrode (BPE), with no loss of analytical performance. Additionally, the two commonly-used ECL systems of Ru(bpy)32+/TPA and luminol/H2O2 are applied to demonstrate the quantitative ability of the BP-ECL CMCA-µTADs. It has been shown that the proposed devices have successfully fulfilled the detection of TPA and H2O2, with detection limits of 0.00432mM and 0.00603mM, respectively. Based on the luminol/H2O2 ECL system, the CMCA-µTADs are further applied for the glucose measurement, with the detection limit of 0.0205mM. Finally, the applicability and validity of the CMCA-µTADs are demonstrated for the measurements of H2O2 in milk, and glucose in human urine and serum. The results indicate that the proposed devices have the potential to become an important new tool for a wide range of applications.

Modified fractal iron oxide magnetic nanostructure: A novel and high performance platform for redox protein immobilization, direct electrochemistry and bioelectrocatalysis application.

A novel biosensing platform based on fractal-pattern of iron oxides magnetic nanostructures (FIOMNs) and mixed hemi/ad-micelle of sodium dodecyl sulfate (SDS) was designed for the magnetic immobilization of hemoglobin (Hb) at a screen printed carbon electrode (SPCE). The FIOMNs was successfully synthesized through hydrothermal approach and characterized by atomic force microscopy (AFM), scanning electron microscopy (SEM) and X-ray diffraction (XRD). In order to provide guidelines for the mixed hemi/ad-micelle formation, zeta-potential isotherms were investigated. The construction steps of the biosensor were evaluated by electrochemical impedance spectroscopy, cyclic voltammetry and Fourier transform infrared spectroscopy. Direct electron transfer of Hb incorporated into the biocomposite film was realized with a pair of quasi-reversible redox peak at the formal potential of -0.355V vs. Ag/AgCl attributing to heme Fe(III)/Fe(II) redox couple. The results suggested that synergistic functions regarding to the hyper-branched and multidirectional structure of FIOMNs and the dual interaction ability of mixed hemi/ad-micelle array of SDS molecules not only induce an effective electron transfer between the Hb and the underlying electrode (high heterogeneous electron transfer rate constant of 2.08s(-1)) but also provide powerful and special microenvironment for the adsorption of the redox proteins. Furthermore, the biosensor displayed an excellent performance to the electrocatalytic reduction of H2O2 with a detection limit of 0.48µM and Michaelis-Menten constant (Km) value of 44.2µM. The fabricated biosensor represented the features of sensitivity, disposable design, low sample volume, rapid and simple preparation step, and acceptable anti-interferences, which offer great perspectives for the screen-determination of H2O2 in real samples.

Increase in oxidative stress levels following welding fume inhalation: a controlled human exposure study.

BACKGROUND: Tungsten inert gas (TIG) welding represents one of the most widely used metal joining processes in industry. It has been shown to generate a large majority of particles at the nanoscale and to have low mass emission rates when compared to other types of welding. Despite evidence that TIG fume particles may produce reactive oxygen species (ROS), limited data is available for the time course changes of particle-associated oxidative stress in exposed TIG welders. METHODS: Twenty non-smoking male welding apprentices were exposed to TIG welding fumes for 60 min under controlled, well-ventilated settings. Exhaled breathe condensate (EBC), blood and urine were collected before exposure, immediately after exposure, 1 h and 3 h post exposure. Volunteers participated in a control day to account for oxidative stress fluctuations due to circadian rhythm. Biological liquids were assessed for total reducing capacity, hydrogen peroxide (H2O2), malondialdehyde (MDA), and 8-hydroxy-2'-deoxyguanosine (8-OHdG) concentrations at each time point. A linear mixed model was used to assess within day and between day differences. RESULTS: Significant increases in the measured biomarkers were found at 3 h post exposure. At 3 h post exposure, we found a 24 % increase in plasma-H2O2 concentrations ([95%CI: 4 % to 46 %], p = 0.01); a 91 % increase in urinary-H2O2 ([2 % to 258 %], p = 0.04); a 14 % increase in plasma-8-OHdG ([0 % to 31 %], p = 0.049); and a 45 % increase in urinary-8-OHdG ([3 % to 105 %], p = 0.03). Doubling particle number concentration (PNC) exposure was associated with a 22 % increase of plasma-8-OHdG at 3 h post exposure (p = 0.01). CONCLUSION: A 60-min exposure to TIG welding fume in a controlled, well-ventilated setting induced acute oxidative stress at 3 h post exposure in healthy, non-smoking apprentice welders not chronically exposed to welding fumes. As mass concentration of TIG welding fume particles is very low when compared to other types of welding, it is recommended that additional exposure metrics such as PNC are considered for occupational risk assessments. Our findings highlight the importance of increasing awareness of TIG welding fume toxicity, especially given the realities of welding workplaces that may lack ventilation; and beliefs among interviewed welders that TIG represents a cleaner and safer welding process.

Immobilizing gold nanoparticles in mesoporous silica covered reduced graphene oxide: a hybrid material for cancer cell detection through hydrogen peroxide sensing.

A new kind of two-dimensional (2-D) hybrid material (RGO-PMS@AuNPs), fabricated by the immobilization of ultrasmall gold nanoparticles (AuNPs, ∼3 nm) onto sandwich-like periodic mesopourous silica (PMS) coated reduced graphene oxide (RGO), was employed for both electrocatalytic application and cancer cell detection. The hybrid-based electrode sensor showed attractive electrochemical performance for sensitive and selective nonenzymatic detection of hydrogen peroxide (H2O2) in 0.1 M phosphate buffered saline, with wide linear detection range (0.5 µM to 50 mM), low detection limit (60 nM), and good sensitivity (39.2 µA mM(-1) cm(-2)), and without any interference by common interfering agents. In addition, the sensor exhibited a high capability for glucose sensing and H2O2 detection in human urine. More interestingly, the hybrid was found to be nontoxic, and the electrode sensor could sensitively detect a trace amount of H2O2 in a nanomolar level released from living tumor cells (HeLa and HepG2). Because the hybrid presents significant properties for the detection of bioactive species and certain cancerous cells by the synergistic effect from RGO, PMS, and AuNPs, it could be able to serve as a versatile platform for biosensing, bioanalysis, and biomedical applications.

Using inflammatory and oxidative biomarkers in urine to predict early acute kidney injury in patients undergoing liver transplantation.

OBJECTIVE: We examined the value of inflammatory and oxidative biomarkers in predicting acute kidney injury (AKI) following orthotopic liver transplantation (OLT). METHODS: Urinary excretion of tumour necrosis factor-α (TNF-α), interleukin-8 (IL-8), interleukin-10 (IL-10), superoxide dismutase (SOD), malondialdehyde (MDA), 6-keto prostaglandin F1α (6-keto-PGF1α), hydrogen peroxide (H2O2), and 8-keto prostaglandin F2α (8-iso-PGF2α), serum creatinine (SCr), blood urea nitrogen (BUN), urinary N-acetyl-beta-D-glucosaminidase (NAG), ß2-microglobulin (ß2-MG) and γ-glutamyl-transferase (γ-GT), were measured before surgery (baseline), at 2 h after graft reperfusion and 24 h after OLT in 28 liver transplantation patients. RESULTS: The levels of TNF-α, IL-8, IL-10, SOD, MDA, 6-keto-PGF1α, H2O2 and 8-iso-PGF2α in urine were all significantly higher in patients who had AKI than in those who did not at 2 h after graft reperfusion and 24 h after OLT (p < 0.01).

Associations of job stress indicators with oxidative biomarkers in Japanese men and women.

Some researchers have suggested that oxidative damage may be one of the mechanisms linking job stress with coronary heart disease. The aim of this study was to investigate the association between job stress indicators and oxidative biomarkers. The study included 567 subjects (272 men, 295 women) who answered questionnaires related to their work and underwent a medical examination. Job stress evaluated using the demands-control-support model was measured using the Job Content Questionnaire. Effort-reward imbalance was measured using the Effort-Reward Imbalance Questionnaire. Urinary hydrogen peroxide (H2O2) and 8-hydroxy-2'-deoxyguanosine (8-OHdG) were measured by the modified ferrous ion oxidation xylenol orange version-1 method and enzyme-linked immunosorbent assay, respectively. In men, the changes in the odds ratios for high urinary H2O2 associated with a 1-standard-deviation (SD) increase in worksite social support were 0.69 (95% confidence interval (CI) 0.53, 0.91) univariately and 0.68 (95%CI 0.51, 0.90) after adjustment for covariates. The change in the odds ratio for high urinary H2O2 associated with a 1-SD increase in effort-reward ratio was 1.35 (95% CI 1.03, 1.78) after adjustment for covariates. In women, there were no significant associations of the two job stress indicators with urinary H2O2 and 8-OHdG levels after adjustment for covariates (p > 0.05).

A one-pot 'green' synthesis of Pd-decorated PEDOT nanospheres for nonenzymatic hydrogen peroxide sensing.

We developed a novel nonenzymatic biosensor based on palladium/poly(3,4-ethylenedioxythiophene) (Pd/PEDOT) nanocomposite modified glassy carbon electrode (GCE) for the detection of hydrogen peroxide (H2O2). Pd/PEDOT has been successfully fabricated by a facile one-pot 'green' method using H2PdCl4 as an oxidant and a source of metal nanoparticles without any surfactants and templates. The as-synthesized PEDOT nanospheres are quite uniform in size (~60 nm) without aggregation and provide a good platform for anchoring the Pd nanoparticles (NPs). Pd NPs (~4.5 nm) are homogenously dispersed on surface of PEDOT nanospheres. The Pd/PEDOT nanospheres on GCE exhibit a good electrocatalytic activity towards the H2O2 reduction. The electrochemical response of Pd/PEDOT to H2O2 exhibits a low detection limit of 2.84 µM in the range of 2.5×10(-3)-1.0 mM with a high sensitivity, good repeatability, acceptable reproducibility and good long-term stability. The good recoveries achieved in spiked human urine samples demonstrated the potential application of Pd/PEDOT for H2O2 detection.