The Enantiomeric Discrimination of 5-Hexyl-2-methyl-3,4-dihydro-2H-pyrrole by Sulfobutyl ether-ß-cyclodextrin: A Case Study.

1-Pyrrolines are important intermediates of active natural products, such as the 2,5-dialkyl-1-pyrroline derivatives found in fire ant venoms. Here, 5-hexyl-2-methyl-3,4-dihydro-2H-pyrrole was synthesized by the enzymatic transamination/cyclization of 2,5-undecadione, and enantiodifferenciation was successfully achieved by capillary electrophoresis with sulfobutyl ether-ß-cyclodextrin as the chiral selector. The rationale of the enantiomeric discrimination was based on the results of a docking simulation that revealed the higher affinity of (S)-5-hexyl-2-methyl-3,4-dihydro-2H-pyrrole for the sulfobutyl ether-ß-cyclodextrin.

Aroma profile of rice varieties by a novel SPME method able to maximize 2-acetyl-1-pyrroline and minimize hexanal extraction.

The solid phase microextraction (SPME) has been the most used technique for the extraction of volatile compounds from rice because of its easy operation and solvent-free. The extraction parameters, sample mass and incubation temperature, were optimized through a central composite rotational design (CCRD), aiming at maximizing the extraction of 2-acetyl-1-pyrroline (2AP), the main compound responsible for the aroma in aromatic rice, and minimizing the generation of hexanal, a marker of lipid oxidation. Besides, the time of sample incubation and fiber exposure for the extraction of the volatile compounds from rice were determined. The optimized conditions for SPME were: 2.5 g of ground rice in a 20 mL vial, sample incubation at 80 °C for 60 min and exposure of the divinylbenzene/carboxene/polydimethylsiloxane (DVB/CAR/PDMS) fiber in the headspace for 10 min. The optimized method was sucessfuly applied to 12 varieties of rice and principal component analysis (PCA) was performed to observe similarities in their volatile profile. A total of 152 volatile compounds were identified among the different rice varieties. From these, 42 were identified in arborio rice, 47 in basmati brand A, 43 in basmati brand B, 55 in black rice, 63 in brown rice, 39 in jamine rice, 50 in parboiled brown rice, 43 in parboiled rice, 54 in red rice, 63 in sasanishiki rice, 46 in white rice and 70 in wild rice.

Pod storage with roasting: A tool to diversifying the flavor profiles of dark chocolates produced from 'bulk' cocoa beans? (part I: aroma profiling of chocolates).

The impact of pod storage (PS) and roasting temperature (RT) on the aroma profiles of dark chocolates were evaluated. Cocoa liquor samples comprised of ten different combinations of PS and RT, whilst keeping the roasting time fixed at 35 min. Additionally, commercial cocoa liquors from renowned origins (Ecuador, Madagascar, Venezuela, Vietnam, Ivory Coast and Ghana) were acquired for comparison. From these, 70% dark chocolates were produced under the same conditions after which they were subjected to headspace solid-phase microextraction-gas chromatography-mass spectrometry (HS-SPME-GC-MS) analysis. Although both PS and RT were found to influence the aroma volatile concentrations, the impact of RT over PS seemed to be greater. An agglomerative hierarchical clustering (AHC) of all chocolates on the basis of their aroma profiles revealed a similar impact as earlier observed, where major clustering of the chocolates was in accordance with the intensity of the roasting process applied. However, within each group, the dissimilarities owing to PS among the chocolates was clearly depicted. Comparatively, chocolates with low (100-120 °C), instead of moderate to high (135-160 °C) RT's, rather showed a low dissimilarity with those from the commercial cocoa liquors of the different origins. Although from the same beans, the diversity of aroma profiles of these chocolates as well as the similitude of some treatments to some chocolates from commercial grade cocoa liquors, unequivocally underscores the possibility for steering diverse distinct flavors from 'bulk' cocoa through PS and roasting, with beneficial implications, both from an application and an economic point of view.

Influência do polipirrol e dos níveis de salinidade na formação de biofilme em Aeromonas spp / Influence of polypyrrole and salinity levels on biofilm formation in Aeromonas spp

Bactérias do gênero Aeromonas são patógenos altamente disseminados no ambiente aquático, responsáveis por grandes perdas econômicas na piscicultura de diversos países. São micro-organismos oportunistas e sua patogenicidade está ligada a alguns fatores de virulência, como a formação de biofilme. O estresse salino é um dos fatores que favorecem a formação dessas colônias e, consequentemente, o aumento de infecções. Essas infecções quando estão associadas ao biofilme são ainda mais resistentes aos antimicrobianos. Nesse contexto, o polipirrol destaca-se como uma alternativa antimicrobiana por possuir vários atributos terapêuticos e não apresentar toxicidade aos organismos. Dessa forma, o objetivo desse estudo foi avaliar o perfil de susceptibilidade e a capacidade de formação de biofilme dos isolados de Aeromonas spp. associados aos diferentes níveis de salinidade e polipirrol. Determinou-se a atividade antibacteriana dos isolados e ensaios de motilidade foram realizados com bactérias que carreavam o gene fla. Também verificou-se a capacidade do cloreto de sódio e polipirrol em interferir na formação do biofilme. Os resultados foram evidenciados com a microscopia eletrônica de varredura. As concentrações de 2 e 3% de NaCl inibiram a motilidade bacteriana. Na formação do biofilme, 83% dos isolados bacterianos induziram a produção na concentração de 0,25%. O polipirrol causou a morte de todos os isolados testados na concentração de 125μg/mL. Além disso, esse composto diminuiu a motilidade bacteriana nas concentrações de 0,25 a 3%, sendo que em relação à produção de biofilme, não houve interferência. Esses resultados evidenciam que os diferentes níveis de NaCl influenciam na formação do biofilme favorecendo a persistência da infecção. Este estudo também realçou a potencialidade do polipirrol como agente bactericida, sendo uma alternativa eficaz às drogas antimicrobianas para o tratamento das infecções causadas por Aeromonas spp.(AU)

Bacteria of the genus Aeromonas are highly disseminated pathogens in the aquatic environment, responsible for great economic losses in the pisciculture of several countries. They are opportunistic microorganisms and their pathogenicity is linked to some virulence factors, such as biofilm formation. Saline stress is one of the factors that favor the formation of these colonies and, consequently, the increase of infections. These infections, when associated with biofilm, are even more resistant to antimicrobials. In this context, polypyrrole stands out as an antimicrobial alternative because it has several therapeutic attributes and does not present toxicity to organisms. Thus, the objective of this study was to evaluate the susceptibility profile and the biofilm formation capacity of Aeromonas spp. associated with different levels of salinity and polypyrrole. The antibacterial activity of the isolates was determined and motility assays were performed with bacteria bearing the fla gene. The ability of sodium chloride and polypyrrole to interfere with biofilm formation has also been demonstrated. The results were evidenced with scanning electron microscopy. Concentrations of 2 and 3% of NaCl inhibited bacterial motility. In the biofilm formation, 83% of the bacterial isolates induced production at the concentration of 0.25%. Polypyrrole caused the death of all the isolates tested at the concentration of 125μg/mL. In addition, this compound decreased bacterial motility at concentrations of 0.25 to 3%, and no biofilm was produced. These results show that the different levels of NaCl influence in the formation of the biofilm favoring the persistence of the infection. This study also highlighted the potential of polypyrrole as a bactericidal agent, being an effective alternative to antimicrobial drugs for the treatment of infections caused by Aeromonas spp.(AU)

Influência do polipirrol e dos níveis de salinidade na formação de biofilme em Aeromonas spp / Influence of polypyrrole and salinity levels on biofilm formation in Aeromonas spp

Bactérias do gênero Aeromonas são patógenos altamente disseminados no ambiente aquático, responsáveis por grandes perdas econômicas na piscicultura de diversos países. São micro-organismos oportunistas e sua patogenicidade está ligada a alguns fatores de virulência, como a formação de biofilme. O estresse salino é um dos fatores que favorecem a formação dessas colônias e, consequentemente, o aumento de infecções. Essas infecções quando estão associadas ao biofilme são ainda mais resistentes aos antimicrobianos. Nesse contexto, o polipirrol destaca-se como uma alternativa antimicrobiana por possuir vários atributos terapêuticos e não apresentar toxicidade aos organismos. Dessa forma, o objetivo desse estudo foi avaliar o perfil de susceptibilidade e a capacidade de formação de biofilme dos isolados de Aeromonas spp. associados aos diferentes níveis de salinidade e polipirrol. Determinou-se a atividade antibacteriana dos isolados e ensaios de motilidade foram realizados com bactérias que carreavam o gene fla. Também verificou-se a capacidade do cloreto de sódio e polipirrol em interferir na formação do biofilme. Os resultados foram evidenciados com a microscopia eletrônica de varredura. As concentrações de 2 e 3% de NaCl inibiram a motilidade bacteriana. Na formação do biofilme, 83% dos isolados bacterianos induziram a produção na concentração de 0,25%. O polipirrol causou a morte de todos os isolados testados na concentração de 125μg/mL. Além disso, esse composto diminuiu a motilidade bacteriana nas concentrações de 0,25 a 3%, sendo que em relação à produção de biofilme, não houve interferência. Esses resultados evidenciam que os diferentes níveis de NaCl influenciam na formação do biofilme favorecendo a persistência da infecção. Este estudo também realçou a potencialidade do polipirrol como agente bactericida, sendo uma alternativa eficaz às drogas antimicrobianas para o tratamento das infecções causadas por Aeromonas spp.(AU)

Bacteria of the genus Aeromonas are highly disseminated pathogens in the aquatic environment, responsible for great economic losses in the pisciculture of several countries. They are opportunistic microorganisms and their pathogenicity is linked to some virulence factors, such as biofilm formation. Saline stress is one of the factors that favor the formation of these colonies and, consequently, the increase of infections. These infections, when associated with biofilm, are even more resistant to antimicrobials. In this context, polypyrrole stands out as an antimicrobial alternative because it has several therapeutic attributes and does not present toxicity to organisms. Thus, the objective of this study was to evaluate the susceptibility profile and the biofilm formation capacity of Aeromonas spp. associated with different levels of salinity and polypyrrole. The antibacterial activity of the isolates was determined and motility assays were performed with bacteria bearing the fla gene. The ability of sodium chloride and polypyrrole to interfere with biofilm formation has also been demonstrated. The results were evidenced with scanning electron microscopy. Concentrations of 2 and 3% of NaCl inhibited bacterial motility. In the biofilm formation, 83% of the bacterial isolates induced production at the concentration of 0.25%. Polypyrrole caused the death of all the isolates tested at the concentration of 125μg/mL. In addition, this compound decreased bacterial motility at concentrations of 0.25 to 3%, and no biofilm was produced. These results show that the different levels of NaCl influence in the formation of the biofilm favoring the persistence of the infection. This study also highlighted the potential of polypyrrole as a bactericidal agent, being an effective alternative to antimicrobial drugs for the treatment of infections caused by Aeromonas spp.(AU)

Differential pulse adsorptive stripping voltammetric determination of nanomolar levels of atorvastatin calcium in pharmaceutical and biological samples using a vertically aligned carbon nanotube/graphene oxide electrode.

A novel vertically aligned carbon nanotube/graphene oxide (VACNT-GO) electrode is proposed, and its ability to determine atorvastatin calcium (ATOR) in pharmaceutical and biological samples by differential pulse adsorptive stripping voltammetry (DPAdSV) is evaluated. VACNT films were prepared on a Ti substrate by a microwave plasma chemical vapour deposition method and then treated with oxygen plasma to produce the VACNT-GO electrode. The oxygen plasma treatment exfoliates the carbon nanotube tips exposing graphene foils and inserting oxygen functional groups, these effects improved the VACNT wettability (super-hydrophobic) which is crucial for its electrochemical application. The electrochemical behaviour of ATOR on the VACNT-GO electrode was studied by cyclic voltammetry, which showed that it underwent an irreversible oxidation process at a potential of +1.08 V in pHcond 2.0 (0.2 mol L(-1) buffer phosphate solution). By applying DPAdSV under optimized experimental conditions the analytical curve was found to be linear in the ATOR concentration range of 90 to 3.81 × 10(3) nmol L(-1) with a limit of detection of 9.4 nmol L(-1). The proposed DPAdSV method was successfully applied in the determination of ATOR in pharmaceutical and biological samples, and the results were in close agreement with those obtained by a comparative spectrophotometric method at a confidence level of 95%.

Method development and validation for cyprodinil and fludioxonil in blueberries by solid-phase microextraction gas chromatography, and their degradation kinetics.

A method of analysis for residues of cyprodinil and fludioxonil in blueberries was developed. Fungicide residues were determined by solid-phase microextraction coupled to GC with nitrogen-phosphorous detection. The effect of pH values and fibre coatings was studied. The solid-phase microextraction fibre coating selected was 100 µm polydimethylsiloxane. The method was selective, with adequate precision and high accuracy and sensitivity. Apparent recoveries ranged within the 99-101% range for cyprodinil and the 98-100% range for fludioxonil; LODs and LOQs were 1.2 and 3.9 µg/kg for cyprodinil and 0.4 and 1.3 µg/kg for fludioxonil, respectively. Statistical parameters indicated a matrix effect; consequently, calibration was performed on spiked samples. Degradation of cyprodinil and fludioxonil was studied in a blueberry field located in Concordia (Argentina), with fruit from Emerald and Jewel varieties. The degradation of these fungicides in both blueberry varieties studied followed first-order rate kinetics for both fungicides, and the half-life for cyprodinil was 2.2 and 3.4 days for Emerald and Jewel cultivars, respectively, and for fludioxonil was 12.7 and 16.3 days, respectively.

Degradation kinetics of atorvastatin under stress conditions and chemical analysis by HPLC.

Atorvastatin is an antilipemic drug belonging to the statins class, whose reference drug is Pfizer's Lipitor®. It is used to reduce the levels of lipoproteins rich in cholesterol and reduce the risk of coronary artery disease. It is well-known that calcium atorvastatin (ATV), C66H68CaF2N4O10•3H2O, presents polymorphism. The drug in question is commonly sought after by pharmaceutical industries that produce generic drugs, due to the fact that the drug has a high value price, it is consumed globally, and its patent expired in late 2010. Many questions concerning this drug's pharmaceutical scope demonstrate its importance regarding stability studies and the identification of degradation products of drugs and pharmaceutical formulations. ATV has been found to degrade under acid and basic conditions, including a first order kinetic degradation under acid conditions, as compared to a zero order kinetic degradation under basic conditions, which tends to be less stable when studied within acid mediums. The rate constant (k) for degradation in acid medium was 1.88 × 10⁻² s⁻¹ (first order), while for basic medium k = 2.35 × 10⁻4 mol L⁻¹ s⁻¹ (zero order), demonstrating a lower stability of the drug within acid mediums.

Differential effects of atorvastatin treatment and withdrawal on pentylenetetrazol-induced seizures.

PURPOSE: Statins are selective inhibitors of 3-hydroxyl-3-methyl-glutaryl coenzyme A (HMG-CoA) reductase, the rate-limiting enzyme of the mevalonate pathway for cholesterol biosynthesis. Increasing evidence indicates that statins, particularly atorvastatin, are neuroprotective in several conditions, including stroke, cerebral ischemia, traumatic brain injury, and excitotoxic amino acid exposure. However, only a few studies have investigated whether statins modulate seizure activity. In the current study we investigated whether atorvastatin or simvastatin alters the seizures induced by pentylenetetrazol (PTZ), a classical convulsant. METHODS: Adult male Wistar rats were treated with atorvastatin or simvastatin for 7 days (10 mg/kg/day). Seizure activity was induced by PTZ (60 mg/kg, i.p.), and evaluated by behavioral and electrographic methods. Cholesterol levels were determined by a standard spectrophotometric method. Blood-brain barrier (BBB) permeability was assessed by the fluorescein method. Atorvastatin levels in the plasma and cerebral cortex were determined by high-performance liquid chromatography tandem mass spectrometry. KEY FINDINGS: We found that oral atorvastatin treatment increased the latency to PTZ-induced generalized seizures. In contrast, when the 7-day atorvastatin treatment was withheld for 1 day (i.e., atorvastatin withdrawal), PTZ-induced seizures were facilitated, as evidenced by a decrease in the latency to clonic and generalized tonic-clonic seizures induced by PTZ. In contrast, simvastatin treatment for 7 days (10 mg/kg/day, p.o.), with or without withdrawal, did not alter PTZ-induced seizures. Interestingly, the effects of atorvastatin treatment and withdrawal were not accompanied by changes in plasma or cerebral cortex cholesterol levels or in the BBB permeability. Atorvastatin levels in the plasma and cerebral cortex after 7 days of treatment were above the half maximal inhibitory concentration for inhibition of HMG-CoA reductase, whereas atorvastatin was not detectable in the plasma or cerebral cortex following a 24 h washout period (atorvastatin withdrawal). SIGNIFICANCE: We conclude that atorvastatin treatment and withdrawal have differential effects on pentylenetetrazol-induced seizures, which are not related to changes in plasma or cerebral cortex cholesterol levels or in BBB permeability. Additional studies are necessary to evaluate the molecular mechanisms underlying our findings as well as its clinical implications.

Nanostructured films employed as sensing units in an "electronic tongue" system.

Nanostructured films of lignin (macromolecule extracted from sugar cane bagasse), polypyrrole (conducting polymer) and bis butylimido perylene (organic dye) were used in the detection of trace levels of fluorine (from H2SiF6), chlorine (from NaClO), Pb(+2), Cu(+2), and Cd(+2) in aqueous solutions. Langmuir monolayers on ultrapure water were characterised by surface pressure-mean molecular area (II-A) isotherms. Langmuir-Blodgett (LB) films were transferred onto gold interdigitated electrodes and used as individual sensing units of an electronic tongue system. Impedance spectroscopy measurements were taken with the sensor immersed into aqueous solutions containing the ions described above in different molar concentrations. Fourier transform infrared absorption (FTIR) was employed to identify possible interactions between the LB films and the analytes in solution, and no significant changes could be observed in the FTIR spectra of BuPTCD and Ppy. Therefore, the results for lignin point to an interaction involving the electronic cloud of the phenyl groups with the metallic ions.

Melanins and lens pigments: a comparative study.

Based on previous findings that lens pigments and melanins share many physicochemical properties, human lens pigments and natural (hair) and synthetic melanins were submitted to oxidation with permanganate under strong acidic conditions. This procedure has been utilized for the characterization of melanins and results in the well defined products, thiazole-4,5-dicarboxylic acid (TDCA) and pyrrole-2,3,5-tricarboxylic acid (PTCA), which can be quantitated by high performance liquid chromatography (HPLC). PTCA is regarded as a marker of black eumelanins and was therefore a main component of synthetic DOPA-eumelanin and dark hair. Its identity was established by synthesis from 5-hydroxyindole-2-carboxylic acid. TDCA derives from pheomelanins and was therefore an important component of red hair and synthetic GSH-pheomelanin. TDCA was identified by its retention time relative to PTCA. The analysis of a series of cataract digests of increasing pigmentation (type I < type IV < type V) and a purified fraction of lens pigments (DE52 pigment) revealed the presence in these preparations of both PTCA and TDCA. The concentration of TDCA significantly increased with the degree of pigmentation of the digests and reached a maximum in the DE52 pigment. The TDCA/PTCA ratio was high in the lens preparations and comparable to that given by hair pheomelanin. These findings support that pheomelanin is an integral part of lens pigments. By comparing the yields of TDCA in GSH-pheomelanin and in the purified lens pigment, a 9% contribution of pheomelanin to the lens pigment was estimated.

Melanins and lens pigments: a comparative study

Based on previous findings that lens pigments and melanins share many physicochemical properties, human lens pigments and natural (hair) and synthetic melanins were submitted to oxidation with permanganate under strong acidic conditions. This procedure has been utilized for the characterization of melanins and results in the well defined products, thiazole-4,5-dicarboxylic acid (TDCA) and pyrrole-2,3,5-tricarboxylic acid (PTCA), which can be quantitated by high performance liquid chromatography (HPLC). PTCA is regarded as a marker of black eumelanins and was therefore a main component of synthetic DOPA-eumelanin and dark hair. Its identity was established by synthesis from 5-hydroxyindole-2-carboxylic acid. TDCA derives from pheomelanins and was therefore an important component of red hair and synthetic GSH-pheomelanin. TDCA was identified by its retention time relative to PTCA. The analysis of a series of cataract digests of increasing pigmentation (type I < type IV < type V) and a purified fraction of lens pigments (DE52 pigment) revealed the presence in these preparations of both PTCA and TDCA. The concentration of TDCA significantly increased with the degree of pigmentation of the digests and reached a maximum in the DE52 pigment. The TDCA/PTCA ratio was high in the lens preparations and comparable to that given by hair pheomelanin. These findings support that pheomelanin is an integral part of lens pigments. By comparing the yields of TDCA in GSH-pheomelanin and in the purified lens pigment, a 9 per cent contribution of pheomelanin to the lens pigment was estimated