Effects of surface-attached durations, nutrients, and relative humidity on the resuspension of bacteria during human walking.

Resuspension caused by human walking activities is an important source of indoor bioaerosols and has been associated with health effects such as allergies and asthma. However, it is unknown whether inhalation of resuspended bioaerosols is an important exposure pathway for airborne infection. Also, crucial factors influencing the resuspension of settled microbes have not been quantified. In this study, we experimentally investigated the resuspension of culturable bacteria from human-stepping on polyvinyl chloride (PVC) flooring under different conditions. We determined the bacterial resuspension emission factor (ER), a normalized resuspension parameter for the ratio of resuspended mass in the air to the mass of settled particles, for two common bacteria, Escherichia coli and Salmonella enterica. The investigation involved varying factors such as microbial surface-attached durations (0, 1, 2, and 3 days), the absence or presence of nutrients on flooring surfaces, and changes in relative humidity (RH) (35%, 65%, and 85%). The results showed that, in the absence of nutrients, the highest ER values for E. coli and S. enterica were 3.8 × 10-5 ± 5.2 × 10-6 and 5.3 × 10-5 ± 6.0 × 10-6, respectively, associated with surface-attached duration of 0 days. As the surface-attached duration increased from 0 to 3 days, ER values decreased by 92% and 84% for E. coli and S. enterica, respectively. In addition, we observed that ER values decreased with the increasing RH, which is consistent with particle adhesion theory. This research offers valuable insights into microbial resuspension during human walking activities and holds the potential for assisting in the assessment and estimation of risks related to human exposure to bioaerosols.

Microorganism diversity and contamination risk in mosque rosaries and carpets.

BACKGROUND: Inevitably, the floors of mosques are contaminated with microorganisms, and the risk of pathogen transmission is probably high between the many visitors, but the issue has been infrequently studied. OBJECTIVES: Investigate microorganism variety and risk of contamination on commonly used carpets and rosaries (prayer beads). DESIGN: Cross-sectional. SETTINGS: Mosques. METHODS: This study was carried out in three different cities of Turkey in 2023, focusing on mosques located around hospitals. Forty mosques were included in the study and from each mosque 10 samples were collected from various parts of carpets and rosaries. The number of positive culture isolates were identified. MAIN OUTCOME MEASURES: Diversity and distribution of microorganisms isolated from mosque carpets and rosaries; methicillin-resistance rates in Staphylococci. SAMPLE SIZE: 400 samples. RESULTS: Growth was observed in 368 (92%) of 400 samples examined. The microorganisms isolated in the highest number were methicillin-susceptible coagulase negative Staphylococci (MSCoNS) (59.8%), Microcooccus (41%) and diphtheroids (31.3%). The rates of total growth (P=.001), including diphtheroids (P=.018), methicillin-resistant coagulase negative Staphylococci (P=.001), Bacillus spp. (P=.036) and Aspergillus spp. (P=.002) rates were significantly higher in the rosary samples than carpet samples. At mosques in Tokat, a province center, 4 samples were positive for Acinetobacter baumannii, two samples were positive for Pseudomonas aeruginosa and one sample for methicillin-resistant Staphylococcus aureus (MRSA), and these were isolated from rosaries. 0.3% of Staphylococcus isolates were MRSA. CONCLUSION: As there is a high risk of contamination of carpets and prayer beads on the mosque floor with human flora, the use of appropriate hygiene practices is necessary. We also found some emerging bacteria in addition to the normal human flora. LIMITATIONS: Our study was conducted in three provinces. Further studies might cover a wider geography.

Ubiquitous Gait Analysis through Footstep-Induced Floor Vibrations.

Quantitative analysis of human gait is critical for the early discovery, progressive tracking, and rehabilitation of neurological and musculoskeletal disorders, such as Parkinson's disease, stroke, and cerebral palsy. Gait analysis typically involves estimating gait characteristics, such as spatiotemporal gait parameters and gait health indicators (e.g., step time, length, symmetry, and balance). Traditional methods of gait analysis involve the use of cameras, wearables, and force plates but are limited in operational requirements when applied in daily life, such as direct line-of-sight, carrying devices, and dense deployment. This paper introduces a novel approach for gait analysis by passively sensing floor vibrations generated by human footsteps using vibration sensors mounted on the floor surface. Our approach is low-cost, non-intrusive, and perceived as privacy-friendly, making it suitable for continuous gait health monitoring in daily life. Our algorithm estimates various gait parameters that are used as standard metrics in medical practices, including temporal parameters (step time, stride time, stance time, swing time, double-support time, and single-support time), spatial parameters (step length, width, angle, and stride length), and extracts gait health indicators (cadence/walking speed, left-right symmetry, gait balance, and initial contact types). The main challenge we addressed in this paper is the effect of different floor types on the resultant vibrations. We develop floor-adaptive algorithms to extract features that are generalizable to various practical settings, including homes, hospitals, and eldercare facilities. We evaluate our approach through real-world walking experiments with 20 adults with 12,231 labeled gait cycles across concrete and wooden floors. Our results show 90.5% (RMSE 0.08s), 71.3% (RMSE 0.38m), and 92.3% (RMSPE 7.7%) accuracy in estimating temporal, spatial parameters, and gait health indicators, respectively.

Synergistic approaches to elevate indoor air quality: A holistic examination of classroom refinement, air exchange optimization, and flooring material impact.

This research endeavors to elevate indoor air quality within aging school environments by concentrating on refining interior finishing materials and windows. Renovations, encompassing window and floor remodeling in classrooms, aim to mitigate particulate matter (PM) infiltration and enhance air exchange rates. Utilizing SPS30 sensors for the analysis of 0.3-2.5 µm particles, with a focus on their implications for human health, the study evaluated air exchange rates, deposition rates, infiltration rates, and particle generation during classroom activities. Post-renovation results demonstrated a noteworthy decrease in air exchange rates, indicating an enhancement in airtightness. The investigation delves into particle generation with various flooring materials, accentuating the importance of opting for durable and low-particle-generating alternatives. Health risk assessments, considering multiple exposure routes (inhalation, dermal contact, and ingestion), revealed reduced risks post-renovation, particularly for children. To further optimize indoor air quality, the study suggests the implementation of air purification systems. Examination of PM generation during student activities showcased a substantial reduction post-renovation. This study underscores the positive influence of architectural enhancements on indoor air quality while acknowledging the necessity for holistic solutions and continuous research.

Potential exposure of adults and children to particles from resuspended nano-enabled consumer sprays.

The increasing application of nanotechnology has resulted in a growing number of nano-enabled consumer products, and they could be important contributors to indoor particulate matter, with potential adverse health effects. This study investigated the exposure of adults and children to the released and resuspended manufactured particles from seven nano-enabled consumer sprays. Sedimentation and resuspension of released particles were investigated in a newly constructed 2.8 × 1.6 × 2.4 m3 chamber. The resuspension of deposited particles was investigated as a function of product type, flooring material (e.g., carpet and vinyl), resuspension force (e.g., walking by an adult and motion of a robotic sampler that simulated a child), and measurement height. The concentration of released and resuspended particles in the air was determined using Button Aerosol Samplers (SKC Inc.) with 25-mm 2 µm-pore PTFE filters. Samplers were positioned in the experimenter's breathing zone (e.g., 1.5 m for adults and 0.3 m for a child-simulating robot) and at fixed stations of 0.3 m and 1.1 m heights. Resuspended particle mass concentrations ranged from 28 to 905 µg/m3, and the resuspension rates of deposited spray particles for the same variable combinations varied from 10-4 to 10-1 h-1, depending on product type, flooring material, sampling height, and resuspension force. Particle resuspension rates from carpet were up to 320 % higher than resuspension rates from vinyl flooring, resuspension rates measured at 0.3 m were up to 195 % higher than the rates measured with a 1.1 m stationary sampler, and resuspension rates due to a walking adult were up to 243 % higher than resuspension rates caused to a moving robot that simulated a child. Overall, these data on the resuspension of particles from nano-enabled consumer sprays could help us understand the resulting exposures and support future studies on human exposure reduction.

A scoring system for grading corkscrew claws in dairy cattle.

Corkscrew claw (CC) in dairy cattle is increasingly reported in dairy herds. CC is a progressive deformity of the claw capsule with uncertain aetiology and pathogenesis. Genetics and specific environmental factors are suspected of contributing to the development of this irreversible condition. CC has been found in lame cows; however, the cause and effect has not been established. To perform analysis of risk factors, treatment and pathogenesis, a definition of severity scores is called for. The aim of this study was to measure and analyse CC characteristics from photos of cows' feet to describe and evaluate a scoring system for CC. Width of the visible part of the axial wall, degree of contact between the toe and the floor and angle of the distal part of the abaxial wall as a proxy for the deviation of the abaxial wall was measured from 393 pictures of CC. Based on the measurements on the claws, the parameter "width of the axial wall" was chosen to define the scores. The parameter was divided into three intervals to define either mild CC 0.3-2.0 cm, moderate CC 2.1-3.5 cm or severe CC>3.5 cm and correlation between the parameters; level of contact between the toe and the floor and the angle of the distal abaxial wall was evaluated. There was a significant positive linear correlation between width of the axial wall and angle of the distal part of the abaxial wall (r=0.91), the wider the axial wall, the more the abaxial wall deviated in the distal part. As the width of the axial wall increased the toe increasingly lost contact with the floor, this association was significant for mild CC and moderate CC but not for severe CC. The Interobserver agreement of the CC Scoring system was tested by 30 claw trimmers each scoring 32 cadaver feet and by 2 trained observers on 28 photos of feet using Cohen´s weighted kappa and showed substantial to almost perfect agreement between untrained and trained observers, respectively.

Machine learning prediction of footwear slip resistance on glycerol-contaminated surfaces: A pilot study.

Slippery surfaces due to oil spills pose a significant risk in various environments, including industrial workplaces, kitchens, garages, and outdoor areas. These situations can lead to accidents and falls, resulting in injuries that range from minor bruises to severe fractures or head trauma. To mitigate such risks, the use of slip resistant footwear plays a crucial role. In this study, we aimed to develop an Artificial Intelligence model capable of classifying footwear as having either high or low slip resistance based on the geometric characteristics and material parameters of their outsoles. Our model was trained on a unique dataset comprising images of 37 indoor work footwear outsoles made of rubber. To evaluate the slip resistant property of the footwear, all samples were tested using a cart-type friction measurement device, and the static and dynamic Coefficient of Frictions (COFs) of each outsole was determined on a glycerol-contaminated surface. Machine learning techniques were implemented, and a classification model was developed to determine high and low slip resistant footwear. Among the various models evaluated, the Support Vector Classifier (SVC) obtained the best results. This model achieved an accuracy of 0.68 ± 0.15 and an F1-score of 0.68 ± 0.20. Our results indicate that the proposed model effectively yet modestly identified outsoles with high and low slip resistance. This model is the first step in developing a model that footwear manufacturers can utilize to enhance product quality and reduce slip and fall incidents.

Effects of Salvinia as a broiler litter material on growth performance, behavior, welfare parameters, litter characters, and ammonia emission.

The type of litter material has direct impacts on production, behavioral, and welfare parameters of broilers. The price of conventionally-used litter materials is increasing. Salvinia molesta is a fast-growing aquatic plant which has become an environmental issue in some areas. This study assessed the suitability of air-dried Salvinia plants (SAL) as an alternate litter material to paddy husk (PH). Resulting in a completely randomized experiment, a total of 240 broilers was raised in 12 floor-pens each provided with either PH or SAL as litter materials, from 11 to 36 d. Scan sampling technique was employed to record the birds' engagement in 15 predetermined behaviors. Foot pad dermatitis (FPD), hock burn damage (HBD) and plumage cleanliness (PC) were assessed using Welfare Quality Scoring System. Litter samples were analyzed for pH, dry matter%, water holding capacity, porosity, N%, tapped-density and ammonia emission rate. The litter material had no significant effect (P > 0.05) on mortality, growth performance parameters, dressing % and visceral organ weight. The scores for FPD and PC were unaffected by the litter materials. SAL litter reported significantly lower (P < 0.05) HBD scores. The percentages of birds engaged in eating and wing flapping behaviors were significantly lower on SAL. Litter type had no significant influence on the color, aroma, flavor, texture and overall acceptability of breast meat. Air-dried Salvinia plants reported acidic pH. SAL litter gave a significantly higher tapped-density. Ammonia emission rate of SAL litter was significantly lower than that of PH. However, the final litter N content was higher for PH (3.7%) than SAL (3.2%). The study proposes air-dried Salvinia plants as a litter material for broilers since it gives growth performance comparable to PH with reduced hock burn damage incidences. Effects of SAL on behavior and the fertilizer value of the spent litter are to be studied further.

Transmission of fore-and-aft floor vibration to the spine and head of standing people.

Sixteen standing male participants were subjected to fore-and-aft sinusoidal vibration with peak magnitude and frequency in the range 0.44-4.431 ms-2 and 2-6 Hz, respectively. The fore-and-aft, lateral and vertical transmissibilities to the first dorsal vertebra (T1), eighth dorsal vertebra (T8), twelfth dorsal vertebra (T12), fourth lumbar vertebra (L4) and head were measured. Large inter-participant variability was observed in the transmissibilities at all locations. Nevertheless, peaks in the range 3-4.5 Hz were identified at all locations, implying a whole-body resonance in this frequency range. The response was found dominant in the mid-sagittal plane as the lateral transmissibility showed low values. Below 4.5 Hz, the fore-and-aft transmissibility increased with moving from caudal to cranial locations of the upper body. However, at higher frequencies, the opposite trend was observed. The results can be used for developing models that may help understand how vibration affects health and comfort.

Experiences of adolescents and youth with HIV testing and linkage to care through the Red Carpet Program (RCP) in Kenya.

Adolescents and youth living with HIV (AYLHIV) experience worse health outcomes compared to adults. We aimed to understand the experiences of AYLHIV in care in the youth-focused Red-Carpet program in Kenya to assess the quality of service provision and identify programmatic areas for optimization. We conducted focus group discussions among 39 AYLHIV (15-24 years) and structured analysis into four thematic areas. Within the HIV testing theme, participants cited fear of positive results, confidentiality and stigma concerns, and suggested engaging the community and youth in HIV testing opportunities. Within the HIV treatment adherence theme, participants cited forgetfulness, stigma, adverse side effects, lack of family support, and treatment illiteracy as barriers to adherence. Most participants reported positive experiences with healthcare providers and peer support. In terms of the HIV status disclosure theme, AYLHIV cited concerns about their future capacity to conceive children and start families and discussed challenges with understanding HIV health implications and sharing their status with friends and partners. Youth voices informing service implementation are essential in strengthening our capacity to optimize the support for AYLHIV within the community, at schools and healthcare facilities.

Shifting reef restoration focus from coral survivorship to biodiversity using Reef Carpets.

To enhance the practice of farmed-coral transplantation, we conducted a trial of an approach called "Reef Carpets" (RC), which draws inspiration from the commercial turf-grass sod in land-based lawn gardening. Three 8.4m2 RCs were established on a sandy seabed, containing preselected combinations of branching corals (Acropora cf. variabilis, Pocillopora damicornis, Stylophora pistillata) with nursery recruited dwellers, and were monitored for 17-months. Corals within RCs grew, supported coral recruitment and offered ecological habitats for coral-associated organisms. While the unstable sediment underneath the RCs increased corals' partial mortalities, corals managed to grow and propagate. The extent of fish and gastropods corallivory varied among the coral species and planulation of Stylophora transplants was significantly higher than same-size natal-colonies. The RCs provided conducive environments for fish/invertebrate communities (183 taxa), and each coral species influenced specifically species-diversity and reef-associated communities. Even dead corals played crucial roles as habitats for reef biota, sustaining >80% of the RCs diversity; hence, they should not be considered automatically as indicators of failure. RCs scaled-up reef restoration and generated, in short periods, new reefs in denuded zones with enhanced biodiversity. Yet, RCs employment on soft-beds could be improved by using more structured artificial frameworks, requiring further research efforts.

Investigating the spatial distribution of volatile organic compounds in aircraft cabins from various emission sources.

Volatile organic compounds (VOCs) significantly affect the air quality in aircraft cabins, consequently affecting passenger health and comfort. Although VOC emission sources and their contributions have been studied extensively, the distribution characteristics of VOCs originating from diverse sources within cabins have received limited attention, and the correlation between VOC sources and concentrations in passenger breathing zones remains largely unexplored. To fill this knowledge gap, the concentration field of VOCs was investigated using a computational fluid dynamics model, and the results were experimentally validated in a typical single-aisle aircraft cabin with seven seat rows. The diffusion characteristics of different VOCs emitted by four typical sources in aircraft cabins (floors, human surfaces, seats, and respiratory sources) were analyzed and compared. The distribution of VOCs emitted by different sources was nonuniform and could be classified into two distinct categories. When the emission intensities of all sources were equal, the average concentration of VOCs emitted from the floor source were considerably lower in the passenger breathing zone (4.01 µg/m³) than those emitted from the human surface, seat, and respiratory sources, which exhibited approximately equal concentrations (6.82, 6.90, and 7.29 µg/m³, respectively). The analysis highlighted that the simplified lumped-parameter method could not accurately estimate the exposure concentrations within an aircraft cabin. To address this issue, we propose a correction method based on the emission intensity of each VOC source. This study provides critical insights into the diffusion characteristics of VOCs within aircraft cabins and VOC emissions from various sources.

Variation in litter occupancy and dust bathing patterns among layer strains following periods of litter restriction.

Producers are moving toward cage-free systems to house laying hens. These include aviary styles with multilevel wire enclosures and litter areas on the floor. In aviaries with doors hens can be confined within the tiered enclosure, which can be done to promote oviposition in nests and prevent hens from laying eggs in litter. However, there are multiple genetic strains of laying hen used in the egg industry, and some show different temporal patterns for key behaviors that could affect when they want to be on litter. For example, though dust bathing by laying hens is typically considered to peak in early afternoon, there may be variation in timing of motivation to dust bathe among strains. Differences in hens' temporal patterns, coupled with aviary configurations or management practices, may restricts birds' ability to perform important behaviors, such as dust bathing (DB), when they would most prefer to do them. Our objective was to determine if there were strain differences in the temporal pattern of DB. We examined the timing of DB in 4 strains of laying hen (Hy-Line Brown [HB], Bovans Brown [BB], DeKalb White [DW], and Hy-Line W36 [W36]) housed in aviaries using 144 hens of each strain per aviary unit (4 units/strain). We recorded the number of hens DB and on litter using instantaneous scan sampling every 5 min using video collected at 26 and 28 wk of age beginning at 11:35 (when litter access began each day) to 20:00 (lights off). Brown strains acclimated to litter access more slowly than white strains. Hens of all strains DB most often soon after gaining access to litter, and more white hens (DW and W36) DB simultaneously and in the presence of more conspecifics. Further examination of diurnal rhythm of behaviors, such as dust bathing, under unconstrained conditions by a range of genetic strains of laying hens is needed to design management practices and aviary styles that best meet hens' needs.

Effects of flooring on static and dynamic balance in young and older adults.

BACKGROUND: Reducing fall-related injuries is difficult due to the multi-factorial nature of falls, and challenges in implementing injury-preventative strategies. While safety floors are effective at absorbing energy and reducing fall-related impact forces, the low stiffness component of these floors may impair an individual's balance and mobility, thereby increasing fall risk. RESEARCH QUESTION: Therefore, the objective of this study was to investigate the influence of compliant flooring (i.e., safety flooring) on balance and mobility in young and older adults. METHODS: Kinematics were measured with inertial measurement units from 20 young and 10 older adults. Static balance was evaluated during quiet stance on three flooring surfaces (traditional, safety, foam) with three stance positions (regular, tandem, one-legged). Mobility was evaluated using the 3 m timed-up-and-go test on two flooring surfaces (traditional, safety). RESULTS: All participants were able to complete quiet standing trials on normal and safety flooring surfaces; however, most older adults could not complete one-legged stance trials or standing on foam. Significant age-related effects were observed for several balance and mobility tasks, particularly during the more challenging tandem stance condition, and the dynamic timed-up-and-go mobility test. In contrast, the introduction of safety flooring (compared to traditional flooring) had limited effects on balance/mobility (1 of 16 outcome variables showed negative effects). SIGNIFICANCE: Overall, the findings demonstrate minimal effects of a novel safety floor compared to the age-related differences, and provide insights to assist researchers, consumers, and industry stakeholders in the development of environments that support safe movement and maintained independence for older adults.

Prospective validity assessment of a friction prediction model based on tread outsole features of slip-resistant shoes.

Shoe outsole design strongly influences slip and fall risk. Certain tread features that can be readily measured have been shown to predict friction performance. This research aimed to replicate those findings and quantify their ability to predict slipping. Participants (n = 34) were exposed to a low friction oil-coated floor surface, while wearing slip-resistant shoes. The coefficient of friction (COF) of each shoe were predicted based on tread surface area, the presence of a bevel, and hardness. The COF was measured, and the slip outcome was determined. Predicted and measured COF were correlated, and measured COF was a sensitive predictor of slip outcome. The relationship of predicted COF on slip outcome was weaker than anticipated and was not statistically significant. This study partially confirmed the ability of previous regression equations to predict COF. However, the effect size was weaker than previously reported and predicted COF was not sensitive for predicting slips.

Carport and carpet: Effects of compound and pseudocompound word structures on typing.

Typing slows at the middle of the word. The exact nature of the slowdown is still disputed. Research on attentional and motoric effects in typing suggests that the slowdown is purely a function of chunking of letters in creating the motor output; this approach posits no further influence of linguistic information during output. Research from a psycholinguistic perspective does posit lexical and sublexical effects during output and explains the midword slowing as a function of slowdowns at the boundaries of sublexical units. Across four experiments, using three different typing tasks, we investigated the typing of compound (schoolteacher) and pseudocompound (carpet) words. Typing at the midword region is sensitive to the morphological structure of the word and to linguistic properties of the word and its (pseudo)constituents (e.g., linguistic information about school and teacher affects schoolteacher, and car and pet affects carpet). These findings suggest that typing compounds involves a hierarchical plan consisting of two separate motor plans for each constituent executed sequentially such that the output of letters is sensitive to the number of letters within that plan, the position of the sequence in the hierarchy (e.g., first vs. second constituent), and the morphemic structure of the to-be-typed word. Surprisingly, given that pseudocompound lexical representations should not include the pseudoconstituents and given that our tasks in the first three experiments demand full access to the lexical representation before typing, pseudocompound typing is also sensitive to the pseudoconstituent characteristics, suggesting that, during typing, the system attempts to build a compound-like structure. (PsycInfo Database Record (c) 2023 APA, all rights reserved).

Carpets with visual cues can improve gait in Parkinson's disease patients: may be independent of executive function.

BACKGROUND: Gait impairment is common in Parkinson's disease (PD) patients, which greatly reduces their quality of life. Executive dysfunction is associated with gait impairment. Compensatory strategies, including visual cues, have been shown to be effective in improving PD gait. In this study, we aimed to understand whether carpets with visual cues could improve PD gait, and how the improvement varies across patients with different executive function state. METHODS: We designed carpets with chessboard and stripe cues. A total of 65 Chinese PD patients were recruited. Movement Disorder Society Unified Parkinson's Disease Rating Scale, L-dopa equivalent daily dosage, Hoehn & Yahr stage, Frontal Assessment Battery, Mini Mental State Examination Scale, Hamilton Anxiety Scale, and Hamilton Depression Scale were evaluated. Gait parameters including stride length, gait speed and fall risk were recorded by a wearable electronic device. RESULTS: The stride length and gait speed were significantly improved and the fall risk was significantly mitigated when PD patients walked on carpets with chessboard and stripe patterns. Further analysis showed the amelioration of gait parameters was independent of executive dysfunction. CONCLUSIONS: Our study demonstrates that carpets with visual cues can improve the gait of PD patients even in those with mild executive dysfunction.

Swept under the carpet: a qualitative study of patient perspectives on Long COVID, treatments, services, and mental health.

BACKGROUND: A constellation of often disabling long-term physical symptoms enduring after an acute SARS-COV-2 infection is commonly referred to as Long COVID. Since Long COVID is a new clinical entity, research is required to clarify treatment needs and experiences of individuals affected. This qualitative descriptive study aimed to provide insight into Long COVID treatment and service experiences and preferences of individuals experiencing Long COVID and the intersections with mental health. METHODS: The study was conducted out of a tertiary care mental health hospital, with online recruitment from the community across Canada. A total of 47 individuals (average age = 44.9) participated in one of 11 focus groups between June and December 2022. Five focus groups were conducted with participants who had pre-existing mental health concerns prior to contracting SARS-CoV-2, and six were with people with Long COVID but without pre-existing mental health concerns. A semi-structured interview guide asked about service experiences and service preferences, including mental health and well-being services. Discussions were recorded, transcribed, and analyzed using codebook thematic analysis. RESULTS: When accessing services for Long COVID, patients experienced: (1) systemic barriers to accessing care, and (2) challenges navigating the unknowns of Long COVID, leading to (3) negative impacts on patient emotional well-being and recovery. Participants called for improvements in Long COVID care, with a focus on: (1) developing Long COVID-specific knowledge and services, (2) enhancing support for financial well-being, daily living, and building a Long COVID community, and (3) improving awareness and the public representation of Long COVID. CONCLUSIONS: Substantial treatment barriers generate considerable burden for individuals living with Long COVID. There is a pressing need to improve treatment, social supports, and the social representation of Long COVID to create integrated, accessible, responsive, and ongoing support systems.

Succinate-mediated reactive oxygen species production in the anoxia-tolerant epaulette (Hemiscyllium ocellatum) and grey carpet (Chiloscyllium punctatum) sharks.

Anoxia/re-oxygenation (AR) results in elevated unchecked oxidative stress and mediates irreversible damage within the brain for most vertebrates. Succinate accumulation within mitochondria of the ischaemic brain appears to increase the production of reactive oxygen species (ROS) upon re-oxygenation. Two closely related elasmobranchs, the epaulette shark (Hemiscyllium ocellatum) and the grey carpet shark (Chiloscyllium punctatum) repeatedly experience near anoxia and re-oxygenation in their habitats and have adapted to survive AR at tropical temperatures without significant brain injuries. However, these anoxia-tolerant species display contrasting strategies to survive AR, with only H. ocellatum having the capacity to supress metabolism and H. ocellatum mitochondria the capacity to depress succinate oxidation post-AR. We measured oxygen consumption alongside ROS production mediated by elevated succinate in mitochondria of permeabilized cerebellum from both shark species. Although mitochondrial respiration remained similar for both species, the ROS production in H. ocellatum was half that of C. punctatum in phosphorylating and non-phosphorylating mitochondria. Maximum ROS production in H. ocellatum was mediated by succinate loads 10-fold higher than in C. punctatum mitochondria. The contrasting survival strategies of anoxia-tolerant sharks reveal the significance of mitigating ROS production under elevated succinate load during AR, shedding light on potential mechanisms to mitigate brain injury.

Deformation rate of engineered wood flooring with response surface methodology and adaptive network-based fuzzy inference system.

Controlling the deformation rate is the key to improving the product quality of engineered wood flooring. In this work, the changes in the deformation rate of engineered wood flooring were in focus with cold-pressing, response surface methodology, and adaptive network-based fuzzy inference system were used to explore the relationship between deformation rate and processing parameters, including adhesive spreading rate, pressing time, and pressing pressure. According to the results, the deformation rate was positively related to pressing time, while it increased first and then decreased with both the increase of adhesive spreading rate and pressing pressure. Meanwhile, a mathematical model was developed, and the significant influence of each term on the deformation rate was analyzed. This model had high feasibility and can be used to describe the relationship between the deformation rate and processing parameters. Furthermore, an adaptive network-based fuzzy inference system model was established. It has higher accuracy than that of the response surface methodology model, and it can be used for predicting deformation rate and optimizing processing parameters. Finally, an optimal processing conditions with the lowest deformation rate was determined as follows: 147 g/m2 adhesive spreading rate, 12s pressing time, and 1.2 MPa pressing pressure, and it hope to be adopted in the industrial processing of engineered wood flooring with respective of the higher product quality and lower production costs.