Toxicity potential of a pyraclostrobin-based fungicide in plant and green microalgae models.

Pyraclostrobin-based fungicides play an effective role in controlling fungal diseases and are extensively used in agriculture. However, there is concern regarding the potential adverse effects attributed to exposure to these fungicides on non-target organisms and consequent influence exerted on ecosystem functioning. Thus, it is essential to conduct studies with model organisms to determine the impacts of these fungicides on different groups of living organisms. The aim of this study was to examine the ecotoxicity associated with exposure to commercial fungicides containing pyraclostrobin. The focus of the analysis involved germination and initial development of seedlings of 4 plant models (Lactuca sativa, Raphanus sativus, Pennisetum glaucum and Triticum aestivum), in addition to determining the population growth rate and total carbohydrate content in microalga Raphidocelis subcapitata. The fungicide pyraclostrobin adversely influenced growth and development of the tested plants, indicating a toxic effect. The fungicide exerted a significant impact on the initial development of seedlings of all model species examined with T. aestivum plants displaying the greatest susceptibility to pyraclostrobin. Plants of this species exhibited inhibitory effects on both aerial parts and roots when treated with a concentration of 4.75 mg/L pyraclostrobin. In addition, the green microalga R. subcapitata was also significantly affected by the fungicide, especially at relatively high concentrations as evidenced by a reduction in total carbohydrate content. This commercial fungicide demonstrated potential phytotoxicity for the tested plant models and was also considered toxic to the selected microalgae, indicating an ecotoxic effect that might affect other organisms in aquatic environments.

Nanoparticles and plants: A focus on analytical characterization techniques.

Nanotechnology has brought about significant progress through the use of goods based on nanomaterials. However, concerns remain about the accumulation of these materials in the environment and their potential toxicity to living organisms. Plants have the ability to take in nanomaterials (NMs), which can cause changes in their physiology and morphology. On the other hand, nanoparticles (NPs) have been used to increase plant development and control pests in agriculture by including them into agrochemicals. The challenges of the interaction, internalization, and accumulation of NMs within plant tissues are enormous, mainly because of the various characteristics of NMs and the absence of reliable analytical tools. As our knowledge of the interactions between NMs and plant cells expands, we are able to create novel NMs that are tailored, targeted, and designed to be safe, thus minimizing the environmental consequences of nanomaterials. This review provides a thorough examination and comparison of the main microscopy techniques, spectroscopic methods, and far-field super-resolution methodologies used to examine nanomaterials within the cell walls of plants.

Examining the interaction between pesticides and bioindicator plants: an in-depth analysis of their cytotoxicity.

Agrochemicals are substances used to prevent, destroy, or mitigate any pest. Their indiscriminate use can cause serious problems in ecosystems, contaminating surface and groundwater and affecting surrounding biota. However, in the environment, various natural processes such as biological degradation and photodegradation can mitigate their persistence and, consequently, their ecotoxicological impact. In this regard, this study aimed to obtain relevant data on the cytotoxic effects produced by pesticides on bioindicator plants. As observed in the literature review, cellular inhibition, nuclear anomalies, and micronucleus index are some of the different impacts commonly known from pesticides. These chemical substances can cause cytogenetic alterations in a plant bioassay. Plant bioindicators such as Allium cepa L, Vicia faba L, Pisum sativum L, Lactuca sativa L, and Lens culinaris Med are very important and effective experimental models for identifying the cytogenotoxicity of pesticides. These have been available for many years. However, they are still used today for their effectiveness in detecting and monitoring chemical substances such as agrochemicals.

Carbon-based nanomaterials as inducers of biocompounds in plants: Potential risks and perspectives.

Biocompounds are metabolites synthesized by plants, with clinically proven capacity in preventing and treating degenerative diseases in humans. Carbon-based nanomaterials (CNMs) are atomic structures that assume different hybridization and shape. Due to the reactive property, CNMs can induce the synthesis of metabolites, such as biocompounds in cells and various plant species, by generating reactive oxygen species (ROS). In response, plants positively or negatively regulate the expression of various families of genes and enzymes involved in physiological and metabolomic pathways of plants, such as carbon and nitrogen metabolism, which are directly involved in plant development and growth. Likewise, ROS can modulate the expression of enzymes and genes related to the adaptation of plants to stress, such as the glutathione ascorbate cycle, the shikimic acid, and phenylpropanoid pathways, from which the largest amount of biocompounds in plants are derived. This document exposes the ability of three CNMs (fullerene, graphene, and carbon nanotubes) to positively or negatively regulate the activity of enzymes and genes involved in various plant species' primary and secondary metabolism. The mechanism of action of CNMs on the production of biocompounds and the effect of the translocation of CNMs on the growth and content of primary metabolites in plants are described. Adverse effects of CNMs on plants, prospects, and possible risks involved are also discussed. The use of CNMs as inducers of biocompounds in plants could have implications and relevance for human health, crop quality, and plant adaptation and resistance to biotic and abiotic stress.

Efectos de las diluciones homeopáticas altas sobre las plantas: revisión de la literatura / Effects of high homeopathic dilutions on plants: a review of the literature

Entre los supuestos no convencionales de la homeopatía, el uso de medicamentos en diluciones altas (HD, por sus siglas en inglés) es una causa de objeciones y escepticismo entre la comunidad científica, formada dentro del paradigma de la dependencia de la dosis de la farmacología clásica. La investigación que busca evidenciar los efectos de las HD homeopáticas recurre a varios modelos experimentales (in vitro, plantas y animales). Objetivo: Describir los resultados de estudios con alta calidad metodológica que han demostrado los efectos positivos de las HD homeopáticas sobre las plantas. Métodos: Tomando como fuente de referencia las revisiones publicadas hasta 2015, actualizamos la información añadiendo datos de estudios recientes incluidos en la base de datos PubMed. Resultados: De los 167 estudios experimentales analizados, 48 cumplieron los criterios mínimos de calidad metodológica, de los cuales 29 detectaron efectos específicos de las diluciones homeopáticas altas sobre las plantas mediante la comparación con controles adecuados. Conclusiones: A pesar de que la mayor parte de los experimentos presentaba una calidad metodológica por debajo del estándar, los estudios que emplearon sistemáticamente reproducibilidad y controles negativos demostraron indiscutibles efectos significativos de las HD homeopáticas sobre las plantas.

Among the non-conventional assumptions of homeopathy, the use of medicines in high dilutions (HD) is a cause for objections and skepticism among the scientific community, trained within the dose-dependency paradigm of classic pharmacology. Research aiming at evidencing the effects of homeopathic HD has resource to several experimental models (in vitro, plants and animals). Aim: To describe the results of studies with high methodological quality that demonstrated positive effects of homeopathic HD on plants. Methods: Taking reviews published until 2015 as reference source, we updated the information through addition of data from recent studies included in database PubMed. Results: From 167 experimental studies analyzed, 48 met the minimum criteria of methodological quality, from which 29 detected specific effects of homeopathic high dilutions on plants through comparison to adequate controls. Conclusions: Despite the substandard methodological quality of most experiments, studies with systematic use of negative controls and reproducibility demonstrated significant indisputable effects of homeopathic HD on plants.

The use of selenium for protective and stimulating effects on plants when soil is contaminated with cadmium / O uso de selênio para efeitos de proteção e estímulo nas plantas com o solo contaminado por cádimo

At the present time one of the tasks of modern agricultural industry consists in obtaining the ecologically safe and clean products. Contamination of soils with heavy metals due to an anthropogenic impact drives up their content in the composition of plant products. This shapes not only a reduction in crop yields, but also a deterioration in products quality. Within the terms of vegetation research in soil culture, there has been studied the protective and stimulating effect of sodium selenite upon the adaptive capacity of spring wheat plants of the variety Zlata under conditions of oxidative stress due to the soil contamination with cadmium. There has been studied the effect of different methods of sodium selenite application on the yield of spring wheat and the plants photosynthetic activity, depending on the level of soil contamination with cadmium. The object of research was a spring wheat variety Zlata. Plants have been cultivated in a greenhouse trial under soil culture conditions in Mitscherlich-vessels with a capacity of 6 kg of soil. Sod-podzolic soil has been used for research. Sodium selenite was introduced in three ways: pre-sowing seed treatment, foliar treatment of vegetative plants at the beginning of stage VI of organogenesis - the end of the tillering phase - the beginning of the stem-extension phase and the application of a salt solution into the soil when packing the vessels. The control samples represented variants without sodium selenite. To assess the plants photosynthetic productivity, there has been determined the chlorophyll content in plant leaves. The research results made it possible to determine the protective effect of sodium selenite on the adaptive capacity of plants under conditions of oxidative stress due to the soil contamination with cadmium. The increase in the adaptive capacity of plants manifested itself through the decrease in yield diminishing due to the improvement of conditions for fertile florets and ear initiations on the vegetative apex, as well as the development of flowers into grains, which contributed to increase in the grain content of the spike. The stimulating effect of selenium on the intensity of photosynthetic processes has been revealed, which showed not only the increase of chlorophylls content, but also the ratio changes of chlorophylls a and b.

Atualmente, uma das tarefas da indústria agrícola moderna consiste em obter produtos ecologicamente seguros e limpos. A contaminação dos solos com metais pesados devido ao impacto antrópico aumenta o seu conteúdo na composição dos produtos vegetais. Isto molda não apenas uma redução no rendimento das colheitas, mas a deterioração da qualidade dos produtos. No âmbito da investigação da vegetação em cultura do solo, estudou-se o efeito protetor e estimulante do selenito de sódio sobre a capacidade adaptativa de plantas de trigo de primavera da variedade Zlata em condições de stress oxidativo devido à contaminação do solo com cádmio. Tem sido estudado o efeito de diferentes métodos de aplicação de selenito de sódio na produtividade do trigo de primavera e na atividade fotossintética das plantas, dependendo do nível de contaminação do solo com cádmio. O objeto de pesquisa foi uma variedade de trigo de primavera Zlata. As plantas foram cultivadas em um teste de estufa sob condições de cultura do solo em vasos Mitscherlich com capacidade para 6 kg de solo. Solo sod-podzólico tem sido usado para pesquisa. O selenito de sódio foi introduzido de três maneiras: tratamento de sementes pré-semeadura, tratamento foliar de plantas vegetativas no início da fase VI da organogênese - final da fase de perfilhamento - início da fase de extensão do caule e aplicação de solução salina no solo ao embalar os vasos. As amostras de controle representaram variantes sem selenito de sódio. Para avaliar a produtividade fotossintética das plantas, determinou-se o teor de clorofila nas folhas das plantas. Os resultados da pesquisa permitiram determinar o efeito protetor do selenito de sódio sobre a capacidade adaptativa de plantas em condições de estresse oxidativo devido à contaminação do solo com cádmio. O aumento da capacidade adaptativa das plantas se manifestou pela diminuição do rendimento diminuindo devido à melhoria das condições para floretes férteis e iniciações de espigas no ápice vegetativo, bem como o desenvolvimento de flores em grãos, o que contribuiu para o aumento do grão conteúdo da espiga. O efeito estimulante do selênio na intensidade dos processos fotossintéticos foi revelado, o que mostrou não apenas o aumento do teor de clorofilas, mas também as mudanças na proporção de clorofilas a e b.

Biostimulation and toxicity: The magnitude of the impact of nanomaterials in microorganisms and plants.

Background: Biostimulation and toxicity constitute the continuous response spectrum of a biological organism against physicochemical or biological factors. Among the environmental agents capable of inducing biostimulation or toxicity are nanomaterials. On the < 100 nm scale, nanomaterials impose both physical effects resulting from the core's and corona's surface properties, and chemical effects related to the core's composition and the corona's functional groups. Aim of Review: The purpose of this review is to describe the impact of nanomaterials on microorganisms and plants, considering two of the most studied physical and chemical properties: size and concentration. Key Scientific Concepts of Review: Using a graphical analysis, the presence of a continuous biostimulation-toxicity spectrum is shown considering different biological responses. In microorganisms, the results showed high susceptibility to nanomaterials. Simultaneously, in plants, a hormetic response was found related to nanomaterials concentration and, in a few cases, a positive response in the smaller nanomaterials when these were applied at a higher level. With the above, it is concluded that: (1) microorganisms are more susceptible to nanomaterials than plants, (2) practically all nanomaterials seem to induce responses from biostimulation to toxicity in plants, and (3) the kind of response observed will depend in a complex way on the nanomaterials physical and chemical characteristics, of the biological species with which they interact, and of the form and route of application and on the nature of the medium -soil, soil pore water, and biological surfaces- where the interaction occurs.

Bioprospection for antiplasmodial activity, and identification of bioactive metabolites of native plants species from the Mata Atlântica biome, Brazil.

A total of 33 extracts of eleven different plants species from Mata Atlântica biome, Brazil, and different fractions of the bioactive extracts were evaluated against chloroquine-resistant Plasmodium falciparum W2 strain by PfLDH method and cytotoxicity to HepG2 cells by the MTT assay, and chemically characterized by LC-DAD-ESI-MS/MS analysis. The results allowed the identification of Alchornea glandulosa, Miconia latecrenata, and Psychotria suterella as the most active plant species. Different flavonoids and tannins in Alchornea glandulosa and Miconia latecrenata besides alkaloids in Psychotria suterella were identified. Bioguided fractionation of A. glandulosa and M. latecrenata leaves extracts led to fractions exhibiting high parasite growth inhibition. Seven known alkaloids were identified in the P. suterella extract, and of these, only 5-carboxystrictosidine had been assayed for antiplasmodial activity what points to this species as the most promising among the eleven one assayed.

Plant growth analysis describing the soybean plants response on dryland field to seed co-inoculation / Análise de crescimento de plantas descrevendo a resposta do cultivo de soja no campo à coinoculação de sementes

Plant growth analysis can be used for soybean plants evaluation to identify morphologic changes caused by soil microbes after seed inoculation. The objective was to measure changes of inoculated soybean plants grown under regular field Brazilian production conditions. The experiment was carried out to compare 5 inoculation treatments: T1 (Bradyrhizobium japonicum and B. diazoefficiens), T2 (T1 and Azospirillum brasilense), T3 (T1 and Trichoderma asperellum), T4 (T1 and T. virens, and Bacillus amyloliquefaciens) and T5 (T1 and Penicillum bilaiae). Leaf area, shoot and root dry matter were measured at vegetative and reproductive growth stages. Results of this study validate the contribution of plant growth analysis of soybeans plants for identifying their responses promoted by the combined inoculation of their seeds with selected microbes. Also, the microbial effects on plant growth vary not only between microbes but also between parts of the plants and through the plant development stages. The introduction of different microbes in soybean rhizosphere combined with Bradyrhizobium sp. strains can contribute to increase crop dry matter productivity during its growing cycle.

Análise de crescimento de plantas pode ser utilizada para avaliação de plantas e identificação de mudanças causadas por microrganismos de solo, depois de serem inoculados nas sementes. O objetivo deste estudo foi medir as mudanças no crescimento de plantas de soja inoculadas em condição de cultivos extensivos de campo no Brasil. O experimento foi conduzido para comparar cinco tratamentos inoculados: T1 (Bradyrhizobium japonicum e B. diazoefficiens), T2 (T1 e Azospirillum brasilense), T3 (T1 e Trichoderma asperellum), T4 (T1 and T. virens, e Bacillus amyloliquefaciens) e T5 (T1 e Penicillum bilaiae). A área foliar e a massa seca da parte aérea e de raízes foram medidas nos estádios vegetativos e reprodutivos. Os resultados validam a contribuição da análise de crescimento de plantas de soja para identificar as respostas causadas pela inoculação de sementes com combinação de microrganismos selecionados. Os efeitos dos microrganismos no crescimento das plantas não variam apenas entre os microrganismos, mas também entre as partes das plantas e ao longo do seu desenvolvimento. A introdução de diferentes micróbios na rizosfera de soja, combinados com cepas de Bradyrhizobium sp. pode aumentar a produtividade de massa seca das culturas durante o seu ciclo de crescimento.

Plant growth analysis describing the soybean plants response on dryland field to seed co-inoculation / Análise de crescimento de plantas descrevendo a resposta do cultivo de soja no campo à coinoculação de sementes

Plant growth analysis can be used for soybean plants evaluation to identify morphologic changes caused by soil microbes after seed inoculation. The objective was to measure changes of inoculated soybean plants grown under regular field Brazilian production conditions. The experiment was carried out to compare 5 inoculation treatments: T1 (Bradyrhizobium japonicum and B. diazoefficiens), T2 (T1 and Azospirillum brasilense), T3 (T1 and Trichoderma asperellum), T4 (T1 and T. virens, and Bacillus amyloliquefaciens) and T5 (T1 and Penicillum bilaiae). Leaf area, shoot and root dry matter were measured at vegetative and reproductive growth stages. Results of this study validate the contribution of plant growth analysis of soybeans plants for identifying their responses promoted by the combined inoculation of their seeds with selected microbes. Also, the microbial effects on plant growth vary not only between microbes but also between parts of the plants and through the plant development stages. The introduction of different microbes in soybean rhizosphere combined with Bradyrhizobium sp. strains can contribute to increase crop dry matter productivity during its growing cycle.(AU)

Análise de crescimento de plantas pode ser utilizada para avaliação de plantas e identificação de mudanças causadas por microrganismos de solo, depois de serem inoculados nas sementes. O objetivo deste estudo foi medir as mudanças no crescimento de plantas de soja inoculadas em condição de cultivos extensivos de campo no Brasil. O experimento foi conduzido para comparar cinco tratamentos inoculados: T1 (Bradyrhizobium japonicum e B. diazoefficiens), T2 (T1 e Azospirillum brasilense), T3 (T1 e Trichoderma asperellum), T4 (T1 and T. virens, e Bacillus amyloliquefaciens) e T5 (T1 e Penicillum bilaiae). A área foliar e a massa seca da parte aérea e de raízes foram medidas nos estádios vegetativos e reprodutivos. Os resultados validam a contribuição da análise de crescimento de plantas de soja para identificar as respostas causadas pela inoculação de sementes com combinação de microrganismos selecionados. Os efeitos dos microrganismos no crescimento das plantas não variam apenas entre os microrganismos, mas também entre as partes das plantas e ao longo do seu desenvolvimento. A introdução de diferentes micróbios na rizosfera de soja, combinados com cepas de Bradyrhizobium sp. pode aumentar a produtividade de massa seca das culturas durante o seu ciclo de crescimento.(AU)

Phytotoxicity indexes and removal of color, COD, phenols and ISA from pulp and paper mill wastewater post-treated by UV/H2O2 and photo-Fenton.

Pulp and paper mill wastewater (PPMWW) contains high concentrations of recalcitrant compounds that cause toxicity to organisms. Advanced oxidation processes (AOPs) have the ability to degrade these compounds and reduce overall toxicity. Physicochemical characterization and Lactuca sativa toxicity test were conducted to compare the effectiveness of two post-treatments: UV/H2O2 and photo-Fenton. A comparison of four phytotoxicity indexes was carried out. PPMWW from a Brazilian treatment plant was characterized by high values of phenols, color, integrated spectral area (ISA), and chemical oxygen demand (COD), and caused significant inhibition to seedling development. The use of both post-treatments allowed the removal of over 75% of phenols, color, ISA, and COD. Although UV/H2O2 was more effective in removing phenols and ISA, photo-Fenton better reduced phytotoxicity. The most sensitive phytotoxicity indexes were RGIC0.8 and GIC80%, whereas SGC0, REC-0.25 and REC-0.50 better showed the effectiveness of the post-treatments. We suggest the combined use of two phytotoxicity indexes: one that evaluates the effects on seed germination and, another, on root elongation, e.g., SGC0 and RGIC0.8. Additionally, we recommend the use of ISA for monitoring programs of wastewater treatments because it is a cost-effective approach that allows narrowing down the search and identification of compounds present in complex mixtures.

Validating the Use of a Toxicity Database for Prediction of Plant Cover and Biodiversity in Multi-Metal Mining-Impacted Soils.

The validity of soil toxicity databases for predicting ecological impacts in the field is rarely explored. The present study was set up to test whether laboratory toxicity data and the combined concepts of metal availability and mixture toxicity can predict ecological impact in mining-affected soils. Metal and As contamination gradients were sampled approximately 5 different mines in Mexico where plant cover and abundances exhibited clear dose-related responses. Soils were analyzed for total and isotopically exchangeable (labile) concentrations of Ni, Cu, Cd, Pb, and As and for soil properties affecting the availability of these elements. Six different indices of toxic doses were compared to evaluate their accuracy in describing the field response expressed as relative abundance and cover. Each index was based on a different method to calculate the sum of toxic units ( Σ TUs) in soil, with 1 toxic unit equal to the concentration of the element in soil yielding 50% adverse effect on plants with median sensitivity as recorded in a recent database of salt-spiked soils. Toxic concentrations in the mine-impacted soils were dominated by Zn and As. In the field, 50% reduced cover or abundance was found at 10 to 13 Σ TUs if these were based on total soil concentrations and thresholds derived from freshly spiked soils, indicating a largely overestimated toxic effect. If thresholds were corrected for differences in availability among freshly spiked soils and spiked and laboratory-aged soils, the overestimation of field toxicity was 5- to 6-fold, irrespective of the consideration of soil properties. Finally, the Σ TU calculated only with labile metals and As overestimated the field toxicity by factors 1.1 to 1.6 (95% confidence interval 1-7; i.e., rather accurate and indicating some Zn-As antagonism as confirmed in experimental studies). That latter index of dose yielded a bell-shaped response on species richness peaking at approximately 1.6 Σ TU. Overall, the present study shows that the current toxicity databases of metals can predict the impact of metal contamination on plant communities within factor 2, expressing the dose as soil-labile concentrations and using the concentration addition concept in these mixed polluted environments. Environ Toxicol Chem 2020;39:1826-1838. © 2020 SETAC.

Toxic effects of lead in plants grown in brazilian soils.

Lead (Pb) in soils can be transferred to plants, animals, and even humans. The toxicity of Pb is worrisome and therefore environmental quality criteria, established by laws to support the management of contaminated sites, have been developed to prevent its deleterious effects in a wide range of soils, uses, and occupations. In Brazil, the CONAMA Resolution 420/2009 established that Brazilian states may define their prevention values (PV) for metals in soils. However, the established values should be well studied, since a wide variation of sensitivity of species exposed to Pb is reported and several have a high tolerance. We aimed to evaluate Pb toxicity to validate the suitability of the current Brazilian Pb-prevention value. A trial was carried with two plant species (sorghum and soybean) grown in two tropical soils (Typic Hapludox and Rhodic Acrudox), following ISO 11.269-2 protocols (ISO 2012). The tested soils were contaminated with Pb-acetate at the following concentrations: 0, 200, 400, 800, 1200, 1600, 2200, 2800, and 3200 mg kg-1 of dry soil. Differences regarding species sensitivity were observed and sorghum seemed to be less sensitive to Pb concentration in soils. Soil characteristics as higher clay and organic matter content were responsible for decreasing the overall availability of Pb for plants. Using data from this study and from the literature, we constructed a species sensitivity distribution curve and calculated the HC5 (hazardous concentration to 5% of variables evaluated). The HC5 was 132.5 mg kg-1, which suggests that the PV currently used in Brazil (72 mg kg-1) is sufficiently protective for Brazilian soils.

Inductively coupled plasma mass spectrometry based platforms for studies involving nanoparticle effects in biological samples.

The widespread application of nanoparticles (NPs) in recent times has caused concern because of their effects in biological systems. Although NPs can be produced naturally, industrially synthesized NPs affect the metabolism of a given organism because of their high reactivity. The biotransformation of NPs involves different processes, including aggregation/agglomeration, and reactions with biomolecules that will be reflected in their toxicity. Several analytical techniques, including inductively coupled plasma mass spectrometry (ICP-MS), have been used for characterizing and quantifying NPs in biological samples. In fact, in addition to providing information regarding the morphology and concentration of NPs, ICP-MS-based platforms, such as liquid chromatography/ICP-MS, single-particle ICP-MS, field-flow fractionation (asymmetrical flow field-flow fractionation)-ICP-MS, and laser ablation-ICP-MS, yield elemental information about molecules. Furthermore, such information together with speciation analysis enlarges our understanding of the interaction between NPs and biological organisms. This study reports the contribution of ICP-MS-based platforms as a tool for evaluating NPs in distinct biological samples by providing an additional understanding of the behavior of NPs and their toxicity in these organisms.

Is arsenite more toxic than arsenate in plants?

In order to evaluate the differential absorption and toxicity of arsenate (AsV) and arsenite (AsIII), Lemna valdiviana plants were grown in a nutrient solution and subjected to 0.0 (control); 0.5; 1.0; 1.5; 2.0; 3.0; 4.0; 5.0 and 7.5 mg L-1 of AsIII or AsV for three days. Exposure to both chemical forms resulted in As bioaccumulation, although AsIII-grown plants showed higher As content in tissues. In AsV-grown plants, the relative growth rate (RGR) decreased to 50%, at a concentration of 4.0 mg L-1, while for treatments with AsIII, the same decrease was observed at 1.0 mg L-1. The tolerance index decreased with increasing concentrations, with lower values for AsIII. Plants treated with AsIII showed increased superoxide anion levels, whilst higher levels of hydrogen peroxide were present in AsV-treated plants. Moreover, malondialdehyde (MDA) levels were higher for plants subjected to AsIII when compared to AsV at lower concentrations. Concentrations of 1 mg L-1 of AsIII and 4 mg L-1 of AsV showed equivalent MDA levels. Superoxide dismutase and catalase activities were increased at low concentrations and were inhibited at higher concentrations of AsIII and AsV, whereas peroxidase activity was positively modulated by increased AsIII or AsV concentrations. In conclusion, L. valdiviana plants took up and accumulated arsenic as AsIII or AsV, demonstrating the potential for phytoremediation of this metalloid. Furthermore, AsIII-exposed plants showed enhanced toxicity when compared to AsV, at the same applied concentration, although toxicity was more related to internal As concentrations, regardless of the chemical form applied.

Which soil Cu pool governs phytotoxicity in field-collected soils contaminated by copper smelting activities in central Chile?

Several studies have attempted to predict the so-called "phytoavailable" fraction by correlating plant responses with different soil metal pools. Most of the data derived from these studies tend to be inconsistent, making interpretations difficult. Thus, the main objective of this study was to determine which soil Cu pool (free Cu2+, salt-exchangeable Cu or total Cu) controls Cu phytotoxicity in soils near a Cu smelter in central Chile. We studied the following traits of the local plant community grown spontaneously on the study site: species richness, shoot biomass, and plant cover. The site was dominated by four early plant colonizers: Eschscholzia californica Cham., Hirschfeldia incana (L.) Lagr.-Fossat, Lolium perenne L., and Vulpia bromoides (L.) Gray. We determined exchangeable soil Cu and activity of free Cu2+ in 0.1 M KNO3 extracts using soil/solution ratio of 1/2.5. The effect of total soil Cu on plant responses was not significant (p > 0.05). In our field-collected soil series, exchangeable Cu was a better indicator of soil phytotoxicity than either total soil Cu or free Cu2+ in the soil solution. We determined upper critical threshold values for Cu exposure using the three plant traits cited above. The mean values of EC10, EC25, and EC50 (effective concentration at 10%, 25%, and 50%, respectively) of exchangeable soil Cu (in µg L-1) were 255, 391, and 533, respectively. The mean EC10, EC25 and EC50 values of pCu2+ were 7.5, 6.8, and 5.9, respectively. We highlight the importance of further studies on Cu phytotoxicity using actual field-contaminated soils.

Current applications of nanotechnology to develop plant growth inducer agents as an innovation strategy.

Nanotechnology has been proposed as an important tool and strategy for applying new products in agriculture at the nanometer scale in order to improve the food crop at sustainability and productivity levels for contributing with the agriculture security. Nanoparticles (NPs) have been planted as an intelligent material with a large contact surface per unit mass respect to bulk-products, allowing its effect to be exerted with greater efficiency in a specific point on a plant target. Currently, NPs have been studied to be applied to various species of monocotyledonous and dicotyledonous plants. Some NPs properties such as concentration, shape, size, composition and surface functionality have the ability to regulate the NPs growth effects on the plant during germination and seedling stages under controlled and field conditions. Furthermore, several studies have tried to explain the mechanism of uptake, translocation and accumulation of NPs inside the plant at the organ and cell level, but further studies are needed to determine specific mechanisms and exact action. Nevertheless, evaluation of the toxicity effects of NPs on physiological indexes of the plant is needed to determine the effective dose without producing adverse effects on the plant and food chain. It is noteworthy that studies have indicated that nanoparticles, regardless of their nature, can be efficient inducers of plant growth. However, a series of laboratory tests are required to optimize their application conditions and their specific physiological impact on plants. In this review, we summarize the knowledge about NPs application to induce plant growth to direct future studies in order to propose NPs for technological innovation.

The role of transposable elements in the evolution of aluminium resistance in plants.

Aluminium (Al) toxicity can severely reduce root growth and consequently affect plant development and yield. A mechanism by which many species resist the toxic effects of Al relies on the efflux of organic anions (OAs) from the root apices via OA transporters. Several of the genes encoding these OA transporters contain transposable elements (TEs) in the coding sequences or in flanking regions. Some of the TE-induced mutations impact Al resistance by modifying the level and/or location of gene expression so that OA efflux from the roots is increased. The importance of genomic modifications for improving the adaptation of plants to acid soils has been raised previously, but the growing number of examples linking TEs with these changes requires highlighting. Here, we review the role of TEs in creating genetic modifications that enhance the adaptation of plants to acid soils by increasing the release of OAs from the root apices. We argue that TEs have been an important source of beneficial mutations that have co-opted OA transporter proteins with other functions to perform this role. These changes have occurred relatively recently in the evolution of many species and likely facilitated their expansion into regions with acidic soils.

Pharmaceutical ethnobotany in the Mahabad (West Azerbaijan) biosphere reserve: ethno-pharmaceutical formulations, nutraceutical uses and quantitative aspects

This study endeavors to overcome the limits of an orally transmitted pharmacopoeia, and tries to utilize the large ethnobotany patrimony of the area to investigate the biological diversity. Thirty-five traditional practitioners from dissimilar ethnic groups including traditional health practitioners (THPs) and indigenous people were interviewed. A total of 35 species of plants, belonging to 20 families were recognized for the treatment of more than 26 types of ailments. Informant consensus factor (FIC) values of this study reflected the high agreement in the use of plants in the treatment of gastro-intestinal complaints, infectious, parasitic diseases and constipation among the informants. Constipation had the highest use-reports and 8 species of plants had the highest fidelity level (FL) of 100%. In addition one of the species showed the highest relative importance (RI) value of 2.00. Priority should be given to phytochemical investigation of plants that scored the highest FL, FIC, RI values; as such values could be considered as a good indicator of potential plants for discovering new drugs. In addition, traditional knowledge of THPs should be taken into consideration in order to smooth continuation and extension of the nutraceutical aspects and biological diversity of the region.

Accumulation of heavy metals in native Andean plants: potential tools for soil phytoremediation in Ancash (Peru).

Metal contamination is a recurring problem in Peru, caused mainly by mine tailings from a past active mining activity. The Ancash region has the largest number of environmental liabilities, which mobilizes high levels of metals and acid drainages into soils and freshwater sources, posing a standing risk on human and environmental health. Native plant species spontaneously growing on naturally acidified soils and acid mine tailings show a unique tolerance to high metal concentrations and are thus potential candidates for soil phytoremediation. However, little is known about their propagation capacity and metal accumulation under controlled conditions. In this study, we aimed at characterizing nine native plant species, previously identified as potential hyperaccumulators, from areas impacted by mine tailings in the Ancash region. Plants were grown on mine soils under greenhouse conditions during 5 months, after which the concentration of Cd, Cu, Ni, Pb, and Zn was analyzed in roots, shoots, and soils. The bioaccumulation (BAF) and translocation factor (TF) were calculated to determine the amount of each metal accumulated in the roots and shoots and to identify which species could be better suited for phytoremediation purposes. Soil samples contained high Cd (6.50-49.80 mg/kg), Cu (159.50-1187.00 mg/kg), Ni (3.50-8.70 mg/kg), Pb (1707.00-4243.00 mg/kg), and Zn (909.00-7100.00 mg/kg) concentrations exceeding national environmental quality standards. After exposure to mine tailings, concentrations of metals in shoots were highest in Werneria nubigena (Cd, 16.68 mg/kg; Cu, 41.36 mg/kg; Ni, 26.85 mg/kg; Zn, 1691.03 mg/kg), Pennisetum clandestinum (Pb, 236.86 mg/kg), and Medicago lupulina (Zn, 1078.10 mg/kg). Metal concentrations in the roots were highest in Juncus bufonius (Cd, 34.34 mg/kg; Cu, 251.07 mg/kg; Ni, 6.60 mg/kg; Pb, 718.44 mg/kg) and M. lupulina (Zn, 2415.73 mg/kg). The greatest BAF was calculated for W. nubigena (Cd, 1.92; Cu, 1.20; Ni, 6.50; Zn, 3.50) and J. bufonius (Ni, 3.02; Zn, 1.30); BCF for Calamagrostis recta (Cd, 1.09; Cu, 1.80; Ni, 1.09), J. bufonius (Cd, 3.91; Cu, 1.79; Ni, 18.36), and Achyrocline alata (Ni, 137; Zn, 1.85); and TF for W. nubigena (Cd, 2.36; Cu, 1.70; Ni, 2.42; Pb, 1.17; Zn, 1.43), A. alata (Cd, 1.14; Pb, 1.94), J. bufonius (Ni, 2.72; Zn, 1.63), and P. clandestinum (Zn, 1.14). Our results suggest that these plant species have a great potential for soil phytoremediation, given their capability to accumulate and transfer metals and their tolerance to highly metal-polluted environments in the Andean region.